ARRIS-C3-POST-MIB
The ARRIS-C3-POST-MIB monitors Power-On Self-Test (POST) execution status and diagnostic results on Arris CMTS C3 hardware platforms. It provides critical failure reporting and boot integrity metrics to verify that the cable modem termination system has successfully completed its initialization sequence.
Imported Objects
Objects
14 total| Object Name |
|---|
cmtsC3POSTMIBThis MIB reports POST result on the Arris CMTS C3 MODULE-IDENTITY .1.3.6.1.4.1.4115.1.4.3.13 |
dcxPOSTObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.3.13.1 |
dcxCPUWANPOSTGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.3.13.1.1 |
dcxCPUWANPOSTTableThis table contains a list WAN and CPU test results. SEQUENCE OF DcxCPUWANPOSTEntry .1.3.6.1.4.1.4115.1.4.3.13.1.1.1 |
dcxCPUWANPOSTEntryAn entry describing an POST result. DcxCPUWANPOSTEntry .1.3.6.1.4.1.4115.1.4.3.13.1.1.1.1 |
dcxCPUWANPOSTTypePOST type Integer32 .1.3.6.1.4.1.4115.1.4.3.13.1.1.1.1.1 |
dcxCPUWANPOSTDescrPOST Descriptionro DisplayString .1.3.6.1.4.1.4115.1.4.3.13.1.1.1.1.2 |
dcxCPUWANPOSTResultTest resultro Enumeration .1.3.6.1.4.1.4115.1.4.3.13.1.1.1.1.3 |
dcx3212POSTGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.3.13.1.2 |
dcx3212POSTTableThis table contains a list WAN and CPU test results. SEQUENCE OF Dcx3212POSTEntry .1.3.6.1.4.1.4115.1.4.3.13.1.2.1 |
dcx3212POSTEntryAn entry describing an POST result. Dcx3212POSTEntry .1.3.6.1.4.1.4115.1.4.3.13.1.2.1.1 |
dcx3212POSTTypePOST type Integer32 .1.3.6.1.4.1.4115.1.4.3.13.1.2.1.1.1 |
dcx3212POSTDescrPOST Descriptionro DisplayString .1.3.6.1.4.1.4115.1.4.3.13.1.2.1.1.2 |
dcx3212POSTResultTest resultro Enumeration .1.3.6.1.4.1.4115.1.4.3.13.1.2.1.1.3 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.