ARRIS-C3-IF-MIB
The ARRIS-C3-IF-MIB enables monitoring of proprietary interface table attributes and operational states on Arris CMTS C3 cable modem termination systems. This module provides granular visibility into physical and logical interface metrics, including status, traffic counters, and error statistics, for network management and troubleshooting.
Imported Objects
Objects
9 total| Object Name |
|---|
cmtsC3IfMIBThis MIB manages the proprietary interface table on the Arris CMTS C3 MODULE-IDENTITY .1.3.6.1.4.1.4115.1.4.3.12 |
dcxIfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.3.12.1 |
dcxIfTableProprietary ifTable additions. SEQUENCE OF DcxIfEntry .1.3.6.1.4.1.4115.1.4.3.12.1.1 |
dcxIfEntryAdditional columns to each ifEntry for monitoring average bit and packet rates per interface. DcxIfEntry .1.3.6.1.4.1.4115.1.4.3.12.1.1.1 |
dcxIfLoadIntervalNumber of seconds from 30 to 600 over which the average input/output bit/packet rate is calculated for the interface. This is not writeable for upstream channels that have a corresponding upstream interface entry. Such channels will mirror the values on the interface.rw Unsigned32 .1.3.6.1.4.1.4115.1.4.3.12.1.1.1.1 |
dcxIfInputBitRateAverage bit rate per second received on the interface over the configured load interval. If one load interval has not yet passed, this represents the average bit rate over the interval so far. Measurements are only made if the interface is operational and are reset if the load interval is changed.ro Unsigned32 .1.3.6.1.4.1.4115.1.4.3.12.1.1.1.2 |
dcxIfInputPacketRateAverage packet rate per second received on the interface over the configured load interval. If one load interval has not expired, this represents the average packet rate over the interval so far. Measurements are only made if the interface is operational and are reset if the load interval is changed.ro Unsigned32 .1.3.6.1.4.1.4115.1.4.3.12.1.1.1.3 |
dcxIfOutputBitRateAverage bit rate per second sent from the interface over the configured load interval. If one load interval has not expired, this represents the average bit rate over the interval so far. Measurements are only made if the interface is operational and are reset if the load interval is changed.ro Unsigned32 .1.3.6.1.4.1.4115.1.4.3.12.1.1.1.4 |
dcxIfOutputPacketRateAverage packet rate per second sent from the interface over the configured load interval. If one load interval has not expired, this represents the average packet rate over the interval so far. Measurements are only made if the interface is operational and are reset if the load interval is changed.ro Unsigned32 .1.3.6.1.4.1.4115.1.4.3.12.1.1.1.5 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.