ARRIS-C3-FPD-MIB
The ARRIS-C3-FPD-MIB facilitates SNMP-based monitoring and configuration of the Front Panel Display subsystem on Arris CMTS C3 hardware, specifically managing display state, content rendering, and operational status indicators for the device's physical interface.
Imported Objects
Objects
54 total| Object Name |
|---|
cmtsC3FPDMIBThis MIB manages the Front Panel Display (FPD) software on the Arris CMTS C3 MODULE-IDENTITY .1.3.6.1.4.1.4115.1.4.3.3 |
dcxFPDObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.3.3.1 |
dcxFPDMsgTableTable of Front Panel LCD Messages. SEQUENCE OF DcxFPDMsgEntry .1.3.6.1.4.1.4115.1.4.3.3.1.1 |
dcxFPDMsgEntry. DcxFPDMsgEntry .1.3.6.1.4.1.4115.1.4.3.3.1.1.1 |
dcxFPDMsgIndexIndex used to order the FPD Messages. Unsigned32 .1.3.6.1.4.1.4115.1.4.3.3.1.1.1.1 |
dcxFPDMsgStringSpecifies a string that can be displayed on the front panel.rw OCTET STRING .1.3.6.1.4.1.4115.1.4.3.3.1.1.1.2 |
dcxFPDControlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.3.3.1.2 |
dcxFPDAttachedStatusDisplays if the front panel display is attached to the Cmts or not.ro Enumeration .1.3.6.1.4.1.4115.1.4.3.3.1.2.1 |
dcxFPDPowerStatus1Specifies if the primary power supply is working. This is the rightmost power supply. The following values are possible: on(1) and off(2)ro Enumeration .1.3.6.1.4.1.4115.1.4.3.3.1.2.2 |
dcxFPDPowerStatus2Specifies if the secondary power supply is working. This is the leftmost power supply(nearest the fan tray). The following values are possible: on(1) and off(2)ro Enumeration .1.3.6.1.4.1.4115.1.4.3.3.1.2.3 |
dcxFPDTemp1StatusSpecifies the temperature reading for the sensor on the CPU card closest to the CPU.ro Integer32 .1.3.6.1.4.1.4115.1.4.3.3.1.2.4 |
dcxFPDTemp2StatusSpecifies the temperature reading for the sensor on the CPU card, on the right hand side.ro Integer32 .1.3.6.1.4.1.4115.1.4.3.3.1.2.5 |
dcxFPDTemp3StatusSpecifies the temperature reading for the sensor on the Kanga card under the Roo cards between RX4 and RX5.ro Integer32 .1.3.6.1.4.1.4115.1.4.3.3.1.2.6 |
dcxFPDTemp4StatusSpecifies the temperature reading for the sensor on the Kanga card under the Roo cards between RX2 and RX3.ro Integer32 .1.3.6.1.4.1.4115.1.4.3.3.1.2.7 |
dcxFPDFan1StatusSpecifies the fan status for the fan nearest the front of the box. The following values are possible: Rotating(1) and BadRotating(2). BadRotating is set when the fan is operating outside of dcxFPDFanUpperLimit and dcxFPDFanLowerLimit.ro Enumeration .1.3.6.1.4.1.4115.1.4.3.3.1.2.8 |
dcxFPDFan2StatusSpecifies the fan status for the fan 2nd from the front. The following values are possible: Rotating(1) and BadRotating(2). BadRotating is set when the fan is operating outside of dcxFPDFanUpperLimit and dcxFPDFanLowerLimit.ro Enumeration .1.3.6.1.4.1.4115.1.4.3.3.1.2.9 |
dcxFPDFan3StatusSpecifies the fan status for the fan 3rd from the front. The following values are possible: Rotating(1) and BadRotating(2). BadRotating is set when the fan is operating outside of dcxFPDFanUpperLimit and dcxFPDFanLowerLimit.ro Enumeration .1.3.6.1.4.1.4115.1.4.3.3.1.2.10 |
dcxFPDFan4StatusSpecifies the fan status for the fan 4th from the front. The following values are possible: Rotating(1) and BadRotating(2). BadRotating is set when the fan is operating outside of dcxFPDFanUpperLimit and dcxFPDFanLowerLimit.ro Enumeration .1.3.6.1.4.1.4115.1.4.3.3.1.2.11 |
dcxFPDFan5StatusSpecifies the fan status for the fan 5th from the front. The following values are possible: Rotating(1) and BadRotating(2). BadRotating is set when the fan is operating outside of dcxFPDFanUpperLimit and dcxFPDFanLowerLimit.ro Enumeration .1.3.6.1.4.1.4115.1.4.3.3.1.2.12 |
dcxFPDFan6StatusSpecifies the fan status for the fan nearest the back of the box The following values are possible: Rotating(1) and BadRotating(2). BadRotating is set when the fan is operating outside of dcxFPDFanUpperLimit and dcxFPDFanLowerLimit.ro Enumeration .1.3.6.1.4.1.4115.1.4.3.3.1.2.13 |
dcxFPDFanUpperLimitSpecifies the upper fan limit(Upper threshold of expected current draw)rw Integer32 .1.3.6.1.4.1.4115.1.4.3.3.1.2.14 |
dcxFPDFanLowerLimitSpecifies the lower fan limit(Lower threshold of expected current draw)rw Integer32 .1.3.6.1.4.1.4115.1.4.3.3.1.2.15 |
dcxFPDLCDContrastSpecifies the contrast level for the LCDrw Integer32 .1.3.6.1.4.1.4115.1.4.3.3.1.2.16 |
dcxFPDLedSetStatusUsed to turn on or off a Led on the front panelrw Integer32 .1.3.6.1.4.1.4115.1.4.3.3.1.2.17 |
dcxFPDHwRevisionSpecifies the front panel h/w revisionro Integer32 .1.3.6.1.4.1.4115.1.4.3.3.1.2.18 |
dcxFPDSwRevisionSpecifies the front panel s/w revisionro Integer32 .1.3.6.1.4.1.4115.1.4.3.3.1.2.19 |
dcxFPDTrapGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.3.3.1.3 |
dcxFPDAttachedFront Panel Display has been attached. NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.1 |
dcxFPDDetachedFront Panel Display has been detached. NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.2 |
dcxFPDFan1FailFan nearest the front of the box failed NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.3 |
dcxFPDFan1FailClrFan nearest the front of the box is working NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.4 |
dcxFPDFan2FailFan 2nd from the front failed NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.5 |
dcxFPDFan2FailClrFan 2nd from the front is working NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.6 |
dcxFPDFan3FailFan 3rd from the front failed NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.7 |
dcxFPDFan3FailClrFan 3rd from the front is working NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.8 |
dcxFPDFan4FailFan 4th from the front failed NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.9 |
dcxFPDFan4FailClrFan 4th from the front is working NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.10 |
dcxFPDFan5FailFan 5th from the front failed NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.11 |
dcxFPDFan5FailClrFan 5th from the front is working NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.12 |
dcxFPDFan6FailFan nearest the back of the box failed NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.13 |
dcxFPDFan6FailClrFan nearest the back of the box is working NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.14 |
dcxFPDPwr1FailRightmost power supply failed NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.15 |
dcxFPDPwr1FailClrRightmost power supply is working NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.16 |
dcxFPDPwr2FailLeftmost power supply failed NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.17 |
dcxFPDPwr2FailClrLeftmost power supply is working NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.18 |
dcxFPDTempOkaySystem temperature is OK NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.19 |
dcxFPDTempBadSystem temperature is too hot! NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.20 |
dcxFPDTempCriticalSystem temperature is critical!!!, CMTS will shut itself down!!!! NOTIFICATION-TYPE .1.3.6.1.4.1.4115.1.4.3.3.1.3.21 |
dcxFPDConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.3.3.1.4 |
dcxFPDCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.3.3.1.4.1 |
dcxFPDComplianceThe compliance statement for devices that implement Arris C3 compliant FPD features Unknown .1.3.6.1.4.1.4115.1.4.3.3.1.4.1.1 |
dcxFPDGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4115.1.4.3.3.1.4.2 |
dcxFPDMsgGroupArris C3 FPD message group Unknown .1.3.6.1.4.1.4115.1.4.3.3.1.4.2.1 |
dcxFPDControlConfGroupArris C3 FPD Control group Unknown .1.3.6.1.4.1.4115.1.4.3.3.1.4.2.2 |
More MIBs from Arris International
Browse all Arris InternationalMIBs →The ARRIS-D5-VIDEO-MIB provides SNMP management interfaces for monitoring and controlling MPEG video transport streams and associated software processes on Arris DOCSIS 3.0/3.1 Cable Modem Termination Systems (CMTS). It exposes operational metrics for video channel status, stream health, and MPEG protocol state transitions to ensure reliable multicast video delivery over the cable network.
The CADANT-CMTS-SYSTEM-MIB provides management access to Arris E6000 Cable Modem Termination System (CMTS) hardware parameters and system constants, enabling the monitoring of critical device states such as CPU utilization, memory usage, temperature sensors, and interface operational status. This module facilitates the collection of system-level telemetry required for capacity planning, fault isolation, and performance analysis within DOCSIS-based cable networks.
The CADANT-CMTS-MAC-MIB provides vendor-specific extensions for Cadant CMTS hardware to map DOCSIF-MIB CM status indices to MAC address tables, enabling precise tracking of cable modem registration states, signal quality metrics, and interface bindings. This module facilitates granular troubleshooting of subscriber connectivity by correlating physical MAC addresses with logical DOCSIS session parameters on the upstream and downstream channels.
The ARRIS-CER-VIDEO-MIB provides SNMP management capabilities for monitoring and controlling MPEG video software processes and parameters on Arris Cable Edge Router (CER) platforms. It enables the tracking of video session states, stream quality metrics, and encoder/decoder operational status to ensure reliable content delivery.
The CADANT-CMTS-EQUIPMENT-MIB facilitates the remote provisioning, diagnostic testing, and auditing configuration of Arris E6 Cable Modem Termination System (CMTS) hardware, specifically managing card and port states while handling equipment-related trap notifications.
The CADANT-HW-MEAS-MIB aggregates hardware-specific counter metrics for the ARRIS C4 Cable Modem Termination System (CMTS), including standard hardware statistics grouped for engineering analysis. This module facilitates the monitoring of physical device health and resource utilization within the Cadant-managed C4 platform.