AP553-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for AP553-MIB.
214
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
214 total| Object Name |
|---|
probeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.2.1 |
RFC1213-MIB Unknown .1.3.6.1.4.1.498.22.1.2.1 |
chanConfig OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.2.1.1 |
lmiOperationLMI operation, on disabled
WEBFLAG
Off
On
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.1.1 |
lmiDLCIThe DLCI # used for LMI polls, the default value is dlci-0
WEBFLAG
DLCI-0
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.1.2 |
ipDLCIValid Inband IP DLCI ranges from 16 to 991rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.1.3 |
ipEncappDefines the IP DLCI Encapsulation method
WEBFLAG
RAW
IETF
SNAP
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.1.4 |
chanAggregateRateDisplays the current aggregate channel rate.ro INTEGER .1.3.6.1.4.1.498.22.1.2.1.1.5 |
lmiConfig OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.2.1.2 |
lmiTypeDefines the network's LMI type.
WEBFLAG
Annex-A
Annex-D
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.2.1 |
lmiN391N391 Full Enquiry Interval Counter ranges from 1 to 255,
the default value is 6.rw INTEGER ( 1..255 ) .1.3.6.1.4.1.498.22.1.2.1.2.2 |
lmiNet392N392 Network Interface Down Threshold Counter
ranges from 1 to 10, the default value is 3.rw INTEGER ( 1..10 ) .1.3.6.1.4.1.498.22.1.2.1.2.3 |
lmiUser392N392 User Interface Down Threshold Counter
ranges from 1 to 10, the default value is 3.rw INTEGER ( 1..10 ) .1.3.6.1.4.1.498.22.1.2.1.2.4 |
lmiNet393N393 Network Interface Down Window Counter ranges
from 1 to 10, the default value is 4.rw INTEGER ( 1..10 ) .1.3.6.1.4.1.498.22.1.2.1.2.5 |
lmiUser393N393 User Interface Down Window Counter ranges from
1 to 10, the default value is 4.rw INTEGER ( 1..10 ) .1.3.6.1.4.1.498.22.1.2.1.2.6 |
t391TimerT391 Status Poll Interval Timer ranges from 5 to 30,
the default value is 10, which would always less than to T392 Timer.rw INTEGER ( 5..30 ) .1.3.6.1.4.1.498.22.1.2.1.2.7 |
t392TimerT392 Polling Verification Interval Timer ranges from 5 to 30,
the default value is 15 should always be greater than T391 Timer.rw INTEGER ( 5..30 ) .1.3.6.1.4.1.498.22.1.2.1.2.8 |
maxInfoLengthMaximum supported frame information length ranges from
400 to 4000, the default value is 4000.rw INTEGER ( 400..4000 ) .1.3.6.1.4.1.498.22.1.2.1.2.9 |
proFunConfig OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.2.1.3 |
unitTypeDefines the ap553 as a master or remote unit in the network.
This option is used to define the probe(s) installed on the local
management network. As a master, PVC hiding is disabled, which allows
discovery of remotely managed probes.
WEBFLAG
Master
Remote
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.3.1 |
probeModeDefines the probe mode as a generator, responder, or both or disabled.
WEBFLAG
Generator
Responder
Generator & Responder
Disabled
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.3.2 |
pollPeriodDefines the frequency of sending the polling frame by the link probe,
from 1 to 60 seconds. pollPeriod applies to all PVCs that are probed.ro INTEGER ( 1..60 ) .1.3.6.1.4.1.498.22.1.2.1.3.3 |
globalTCThis parameter defines the committed rate measurement
time interval (in seconds) which can be calculated as
Bc/CIR, currently we only allow this value to be 1 sec.ro INTEGER .1.3.6.1.4.1.498.22.1.2.1.3.4 |
pvcCountPVC count defines the total number of PVCs which are being
probed. The value is between 1 to 127.ro INTEGER ( 1..127 ) .1.3.6.1.4.1.498.22.1.2.1.3.5 |
probeTokenSizeDefines the probe token size.ro INTEGER ( 19..4096 ) .1.3.6.1.4.1.498.22.1.2.1.3.6 |
pvcAddThis object allows for manual addition of a PVC to the existing PVC
table, the added PVC must not exist before it is added.rw INTEGER ( 16..991 ) .1.3.6.1.4.1.498.22.1.2.1.3.7 |
pvcDeleteThis object allows for manual deletion of a PVC from the existing
PVC table, the deleted PVC must exist before it was deleted.rw INTEGER ( 16..991 ) .1.3.6.1.4.1.498.22.1.2.1.3.8 |
pvcDiscoveryThis object automatically adds PVCs as seen by the LMI protocol.
It controls the probe ability to read all pvcs as reported by the LMI
process and update the probe pvc data table as controlled by the
pvcCirEirTable. Values of 2 and 3 cannot be set and have no affect.rw Enumeration .1.3.6.1.4.1.498.22.1.2.1.3.9 |
trapConfig OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.2.1.4 |
pvcOperStateChangeTrapSeverityControls the reporting of and defines the severity of the pvc
state change trap which may be sent when a PVC's operational status
is changed via the pvcOperation object.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.1 |
realTimeTrapSeverityControls the reporting of and defines the severity of ALL real time
alarm conditions: Channel Load To DTE, Channel Load TO DCE,
PVC Load To DCE, PVC Load To DTE, and PVC Round Trip Delay.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.2 |
realTimeChanLoadToDCEThreshDefines the maximum allowed real-time channel load calculated every
second, expressed in percentage. If the actual load is more than this
threshold, a realTimeTrapSeverity exception trap may be sent as specified
by the realTimeTrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.3 |
realTimeChanLoadToDCEThreshVarDefines the variation range for real-time channel load, expressed in
percentage.. If within the current TC interval, the variation of the
actual utilization is more than that range compared with the previous
trap value, another realTimeTrapSeverity exception trap may be sent as
specified by the realTimeTrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.4 |
avgChanLoadToDCETrapSeverityControls the reporting of and defines severity of the 15 minute average
load exception trap.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.5 |
avgChanLoadToDCEThreshDefines the maximum allowed frame relay channel utilization in a 15
minute period, expressed in percentage. If the actual average utilization
is more than this threshold, an avgChanLoadToDCETrap trap may be sent as
specified by the avgChanLoadToDCETrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.6 |
realTimeChanLoadToDTEThreshDefines the maximum allowed real-time channel load calculated every
second, expressed in percentage. If the actual load is more than this
threshold, a realTimeTrapSeverity exception trap may be sent as specified
by the realTimeTrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.7 |
realTimeChanLoadToDTEThreshVarDefines the variation range for real-time channel load, expressed in
percentage.. If within the current TC interval, the variation of the
actual utilization is more than that range compared with the previous
trap value, another realTimeTrapSeverity exception trap may be sent as
specified by the realTimeTrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.8 |
avgChanLoadToDTETrapSeverityControls the reporting of and defines severity of the 15 minute average
load exception trap.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.9 |
avgChanLoadToDTEThreshDefines the maximum allowed frame relay channel utilization in a 15
minute period, expressed in percentage. If the actual average utilization
is more than this threshold, an avgChanLoadToDTETrap trap may be sent as
specified by the avgChanLoadToDTETrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.10 |
realTimePvcLoadToDCEThreshDefines the maximum allowed real-time PVC load calculated every
second, expressed in percentage. If the actual load is more than this
threshold, a realTimeTrapSeverity exception trap may be sent as specified
by the realTimeTrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.11 |
realTimePvcLoadToDCEThreshVarDefines the variation range for real-time PVC load, expressed in
percentage.. If within the current TC interval, the variation of the
actual utilization is more than that range compared with the previous
trap value, another realTimeTrapSeverity exception trap may be sent as
specified by the realTimeTrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.12 |
avgPvcLoadToDCETrapSeverityControls the reporting of and defines severity of the 15 minute average
load exception trap.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.13 |
avgPvcLoadToDCEThreshDefines the maximum allowed PVC load in a 15 minute period, expressed in
percentage. If the actual average PVC loading is more than this threshold,
an avgPvcLoadToDCETrap trap may be sent as specified by the
avgPvcLoadToDCETrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.14 |
realTimePvcLoadToDTEThreshDefines the maximum allowed real-time PVC load calculated every
second, expressed in percentage. If the actual load is more than this
threshold, a realTimeTrapSeverity exception trap may be sent as specified
by the realTimeTrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.15 |
realTimePvcLoadToDTEThreshVarDefines the variation range for real-time PVC load, expressed in
percentage. If within the current TC interval, the variation of the
actual utilization is more than that range compared with the previous
trap value, another realTimeTrapSeverity exception trap may be sent as
specified by the realTimeTrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.16 |
avgPvcLoadToDTETrapSeverityControls the reporting of and defines severity of the 15 minute average
load exception trap.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.17 |
avgPvcLoadToDTEThreshDefines the maximum allowed PVC load in a 15 minute period, expressed in
percentage. If the actual average utilization is more than this threshold,
an avgPvcLoadToDTETrap trap may be sent as specified by the
avgPvcLoadToDTETrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.18 |
realTimePvcRoundTripDelayThreshDefines the maximum allowed real-time PVC round trip delay, calculated
every second, expressed in percentage. If the actual load is more than
this threshold, a realTimeTrapSeverity exception trap may be sent as
specified by the realTimeTrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.19 |
realTimePvcRoundTripDelayThreshVarDefines the variation range for real-time PVC round trip delay, expressed
in percentage.. If within the current TC interval, the variation of the
actual round trip delay is more than that range compared with the previous
trap value, another realTimeTrapSeverity exception trap may be sent as
specified by the realTimeTrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.20 |
avgPvcRoundTripDelayTrapSeverityControls the reporting of and defines severity of the 15 minute average
round trip delay exception trap.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.21 |
avgPvcRoundTripDelayThreshDefines the maximum allowed PVC round trip delay in a 15 minute period,
expressed in percentage. If the actual average PVC round trip delay
is more than this threshold, an avgPvcRoundTripDelayTrap trap may be sent
as specified by the avgPvcRoundTripDelayTrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.22 |
avgPvcNotAvailToDCETrapSeverityControls the reporting of and defines severity of the
avgPvcNotAvailToDCE exception trap. This condition may be reported when
the avgPvcNotAvailToDCEThresh object value is exceeded within a 15 minute
period.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.23 |
avgPvcNotAvailToDCEThreshDefines the maximum allowed average unavailability in a 15 minute period,
expressed in percentage. If the actual value is more than this threshold,
an avgPvcNotAvailToDCE trap may be sent as specified by the
avgPvcNotAvailToDCETrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.24 |
avgPvcNotAvailToDTETrapSeverityControls the reporting of and defines severity of the
avgPvcNotAvailToDTE exception trap. This condition may be reported when
the avgPvcNotAvailToDTEThresh object value is exceeded within a 15 minute
period.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.25 |
avgPvcNotAvailToDTEThreshDefines the maximum allowed average unavailability in a 15 minute period,
expressed in percentage. If the actual value is more than this threshold,
an avgPvcNotAvailToDTE trap may be sent as specified by the
avgPvcNotAvailToDTETrapSeverity object value.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.26 |
avgPvcFecnFramesTrapSeverityControls the reporting of and defines severity of the avgPvcFecnFrames
exception trap. This condition may be reported when the
avgPvcFecnFramesThresh object value is exceeded within a 15 minute period.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.27 |
avgPvcFecnFramesThreshDefines the maximum allowed number of FECN frames which may be received
in a 15 minute period.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.28 |
avgPvcBecnFramesTrapSeverityControls the reporting of and defines severity of the avgPvcBecnFrames
exception trap. This condition may be reported when the
avgPvcFecnFramesThresh object value is exceeded within a 15 minute period.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.29 |
avgPvcBecnFramesThreshDefines the maximum allowed number of BECN frames which may be received
in a 15 minute period.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.4.30 |
avgPvcCIRExceedToDTETrapSeverityControls the reporting of and defines severity of the
avgPvcCIRExceedToDTE exception trap. This trap may be reported if
this condition occurs over a 15 minute period.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.31 |
avgPvcEIRExceedToDTETrapSeverityControls the reporting of and defines severity of the
avgPvcEIRExceedToDTE exception trap. This trap may be reported if
this condition occurs over a 15 minute period.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.32 |
avgPvcLossFrameTxTrapSeverityControls the reporting of and defines severity of the
avgPvcLossFrameTx exception trap. This trap may be reported if
this condition occurs over a 15 minute period.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.33 |
avgPvcLossFrameRxTrapSeverityControls the reporting of and defines severity of the
avgPvcLossFrameTx exception trap. This trap may be reported if
this condition occurs over a 15 minute period.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.34 |
networkLmiInterfaceDownTrapSeverityControls the reporting of and defines severity of the
networkLmiInterfaceDown exception trap.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.35 |
userLmiInterfaceDownTrapSeverityControls the reporting of and defines severity of the
userLmiInterfaceDown exception trap.
WEBFLAG
Inhibit
Critical
Major
Minor
Warning
Info
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.4.36 |
pvcConfig OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.2.1.5 |
pvcCirEirTablePVC table, which lists PVCs for which the statistic data are collected. SEQUENCE OF PvcCirEirEntry .1.3.6.1.4.1.498.22.1.2.1.5.1 |
pvcCirEirEntryIdentifies an entry (row) in PVC CIR/EIR table. PvcCirEirEntry .1.3.6.1.4.1.498.22.1.2.1.5.1.1 |
pvcCirEirTableIndexIdentifies an entry (row) in PVC table.ro INTEGER ( 16..991 ) .1.3.6.1.4.1.498.22.1.2.1.5.1.1.1 |
pvcCirToDTEDefines the committed information rate, in bps, under normal
conditions in the direction of to DTE.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.5.1.1.2 |
pvcCirToDCEDefines the committed information rate, in bps, under normal
conditions in the direction of to DCE.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.5.1.1.3 |
pvcEirToDTEDefines the maximum transfer information rate, in bps, which the
network is accepting in the direction of to DTE.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.5.1.1.4 |
pvcEirToDCEDefines the maximum transfer information rate, in bps, which the
network is accepting in the direction of to DCE.rw INTEGER .1.3.6.1.4.1.498.22.1.2.1.5.1.1.5 |
pvcOperationDefines the monitored state of a PVC. pvcNotProbed - specifies that
the PVC will not be probed, round trip delay and frame loss measurements
will not be tabulated. pvcWaitForProbe specifies that this PVC is in a
transition state, and will be probed at the start of the next 15 minute
poll cycle for statistic data collection. pvcProbed is a read only value
that indicates this PVC is used for both statistic data and probing.
WEBFLAG
Not Probed
Probe Pending
Probed
WEBENDrw Enumeration .1.3.6.1.4.1.498.22.1.2.1.5.1.1.6 |
pvcStateReflects the state of the PVC as seen by the probe.
`unavailable' indicates that the PVC is not included in the DLCI list.
`inactive indicates that the PVC is no longer responding.
`active' indicates that the PVC is in operational state.ro Enumeration .1.3.6.1.4.1.498.22.1.2.1.5.1.1.7 |
pvcIdentifierComment field for annotation.rw DisplayString .1.3.6.1.4.1.498.22.1.2.1.5.1.1.8 |
probeVersion OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.2.1.6 |
frProbeMIBversionIdentifies the version of the MIB as 'X.YZT' where:
X: Major Revision (1-9)
Y: Minor Revision (0-9)
Z: Typographical Revision (0-9)
T: Test Revision (A-Z)rw DisplayString .1.3.6.1.4.1.498.22.1.2.1.6.1 |
probeStat OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.2.2 |
chStCurrent OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.2.2.1 |
chCurrDteFramesIdentifies total frames received from DTE device within
current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.1 |
chCurrDceFramesIdentifies total frames received from DCE device within
current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.2 |
chCurrDteOctetsIdentifies total octets received from DTE device within
current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.3 |
chCurrDceOctetsIdentifies total octets received from DTE device within
current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.4 |
chCurrLmiTxEnqIdentifies the total number of LMI enquiries sent to DCE
within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.5 |
chCurrLmiTxRespIdentifies the total number of LMI responses sent to DTE
within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.6 |
chCurrLmiRxEnqIdentifies the total number of LMI enquiries from the DTE
within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.7 |
chCurrLmiRxRespIdentifies the total number of LMI status responses received
from the DCE within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.8 |
chCurrDTELmiTimeoutIdentifies the total number of lmi timeouts received
within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.9 |
chCurrDCELmiTimeoutIdentifies the total number of lmi timeouts received
within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.10 |
chCurrFecnFramesIdentifies total number of frames with FECN set received
within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.11 |
chCurrBecnFramesIdentifies total number of frames with BECN set received
within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.12 |
chCurrTxIpIdentifies total number of IP packets sent on inband DLCI
within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.13 |
chCurrRxIpIdentifies total number of IP packets received on inband
DLCI within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.14 |
chCurrTxPollIdentifies total number of probe polls sent to DCE within
current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.15 |
chCurrTxRespIdentifies total number of probe responses sent to DCE
within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.16 |
chCurrRxPollIdentifies total number of probe polls received from DCE
within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.17 |
chCurrRxRespIdentifies total number of probe responses received from
DCE within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.1.18 |
intervalCompleteThis object identifies the the percent completeion
of the interval.ro INTEGER ( 1..100 ) .1.3.6.1.4.1.498.22.1.2.2.1.19 |
chStIntervalTableprobe statistic table, row 1 to row 96,
which defines the time interval for every 15
minutes. SEQUENCE OF ChStIntervalEntry .1.3.6.1.4.1.498.22.1.2.2.2 |
chStIntervalEntryIdentifies an entry (row) in probe statistic table. ChStIntervalEntry .1.3.6.1.4.1.498.22.1.2.2.2.1 |
chIntvIndexIdentifies an entry (row) in channel statistic table,
1-96 time intervals.ro INTEGER ( 1..96 ) .1.3.6.1.4.1.498.22.1.2.2.2.1.1 |
chIntvDteFramesIdentifies total frames received from DTE device within a 15
minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.2 |
chIntvDceFramesIdentifies total frames received from DCE device within a 15
minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.3 |
chIntvDteOctetsIdentifies total octets received from DTE device within a 15
minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.4 |
chIntvDceOctetsIdentifies total octets received from DTE device within a 15
minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.5 |
chIntvLmiTxEnqIdentifies the total number of LMI enquiries sent to DCE
within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.6 |
chIntvLmiTxRespIdentifies the total number of LMI responses send to
DTE within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.7 |
chIntvLmiRxEnqIdentifies the total number of LMI enquiries received
within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.8 |
chIntvLmiRxRespIdentifies the total number of LMI status responses received
from the DCE within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.9 |
chIntvDTELmiTimeoutIdentifies the total number of LMI timeouts received
within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.10 |
chIntvDCELmiTimeoutIdentifies the total number of LMI timeouts received
within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.11 |
chIntvFecnFramesIdentifies total number of frames with FECN set received
within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.12 |
chIntvBecnFramesIdentifies total number of frames with BECN set received
within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.13 |
chIntvTxIpIdentifies total number of IP packets sent on inband DLCI
within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.14 |
chIntvRxIpIdentifies total number of IP packets received on inband
DLCI within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.15 |
chIntvTxPollIdentifies total number of probe polls sent to DCE within
a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.16 |
chIntvTxRespIdentifies total number of probe response sent to DCE within
a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.17 |
chIntvRxPollIdentifies total number of probe polls received from DCE
within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.18 |
chIntvRxRespIdentifies total number of probe responses received from
DCE within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.2.1.19 |
pvcStCurrentTablePVC statistic table. SEQUENCE OF PVCStCurrentEntry .1.3.6.1.4.1.498.22.1.2.2.3 |
pvcStCurrentEntryIdentifies an entry (row) in PVC statistic table PVCStCurrentEntry .1.3.6.1.4.1.498.22.1.2.2.3.1 |
pvcCurrDlciIndexIndex in PVC statistics table, which identifies
the PVC number, up to 20 PVCs can exist.ro INTEGER ( 16..991 ) .1.3.6.1.4.1.498.22.1.2.2.3.1.1 |
pvcCurrDteFramesIdentifies total frames received from DTE device for a
specific PVC within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.3.1.2 |
pvcCurrDceFramesIdentifies total frames received from DCE device for a
specific PVC within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.3.1.3 |
pvcCurrDteOctetsIdentifies total octets received from DTE device for a
specific PVC within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.3.1.4 |
pvcCurrDceOctetsIdentifies total octets received from DTE device for a
specific PVC within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.3.1.5 |
pvcCurrDteFramesWithDEIdentifies total frames with DE bit set received from DTE
device for a specific PVC within current 15 minutes
interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.3.1.6 |
pvcCurrDceFramesWithDEIdentifies total frames with DE bit set received from DCE
device for a specific PVC within current 15 minutes
interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.3.1.7 |
pvcCurrFecnFramesIdentifies total number of frames for a specific PVC
with FECN set received within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.3.1.8 |
pvcCurrBecnFramesIdentifies total number of frames for a specific PVC
with BECN set received within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.3.1.9 |
pvcCurrTxPollIdentifies total number of probe polls sent to DCE within
current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.3.1.10 |
pvcCurrTxRespIdentifies total number of probe responses sent to DCE
within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.3.1.11 |
pvcCurrRxPollIdentifies total number of probe polls received from DCE
on a specific PVC within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.3.1.12 |
pvcCurrRxRespIdentifies total number of probe responses received from DCE
on a specific PVC within current 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.3.1.13 |
pvcCurrLoopbackIdentifies whether the specific PVC has been found to be in
a loop back state by link probe's generator process.ro Enumeration .1.3.6.1.4.1.498.22.1.2.2.3.1.14 |
pvcStIntervalTablePVC statistic interval table: SEQUENCE OF PVCStIntervalEntry .1.3.6.1.4.1.498.22.1.2.2.4 |
pvcStIntervalEntryIdentifies an entry (row) in pvc statistic table PVCStIntervalEntry .1.3.6.1.4.1.498.22.1.2.2.4.1 |
pvcIntvDlciIndexThis index value which uniquely identifies the PVC
number to which this entry is applicable.ro INTEGER ( 16..991 ) .1.3.6.1.4.1.498.22.1.2.2.4.1.1 |
pvcIntvIndexA number between 1 and 96, where 1 is the most recently
completed 15 minutes interval and 96 is the least recently
completed 15 minutes interval.ro INTEGER ( 1..96 ) .1.3.6.1.4.1.498.22.1.2.2.4.1.2 |
pvcIntvDteFramesIdentifies total frames received from DTE device for a
specific PVC within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.4.1.3 |
pvcIntvDceFramesIdentifies total frames received from DCE device for a
specific PVC within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.4.1.4 |
pvcIntvDteOctetsIdentifies total octets received from DTE device for a
specific PVC within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.4.1.5 |
pvcIntvDceOctetsIdentifies total octets received from DCE device for a
specific PVC within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.4.1.6 |
pvcIntvDteFramesWithDEIdentifies the frames with DE bit set received from DTE
device for a specific PVC within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.4.1.7 |
pvcIntvDceFramesWithDEIdentifies the frames with DE bit set received from DCE
device for a specific PVC within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.4.1.8 |
pvcIntvFecnFramesIdentifies total number of frames for a specific PVC
with FECN set received within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.4.1.9 |
pvcIntvBecnFramesIdentifies total number of frames for a specific PVC
with BECN set received within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.4.1.10 |
pvcIntvTxPollIdentifies total number of probe polls sent to DCE within
a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.4.1.11 |
pvcIntvTxRespIdentifies total number of probe responses sent to DCE
within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.4.1.12 |
pvcIntvRxPollIdentifies total number of probe polls received from DCE
on a specific PVC within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.4.1.13 |
pvcIntvRxRespIdentifies total number of probe responses received from
DCE on a specific PVC within a 15 minutes interval.ro Counter .1.3.6.1.4.1.498.22.1.2.2.4.1.14 |
pvcIntvLoopbackIdentifies whether the specific PVC has been found to be
in a loop back state by link probe's generator process.ro Enumeration .1.3.6.1.4.1.498.22.1.2.2.4.1.15 |
probePerform OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.2.3 |
chanPerfCurr OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.2.3.1 |
chPerfCurrUnavailToDteThis object identifies the channel unavailability due to
remote DTE fault within the latest 15 minutes. This
statistic datum is calculated by the channel unavailable
time over the full time interval.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.1.1 |
chPerfCurrUnavailToDceThis object identifies the channel unavailability due to
local DTE fault within the latest 15 minutes. This
statistic datum is calculated by the channel unavailable
time over the full time interval.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.1.2 |
chPerfCurrTxLoadchannel average user tx load within the latest 15 minutes,
this statistic datum is calculated by user data octets
sent by the channel within the 15 minutes over the total
channel available load ( which depends on physical
interface speed).ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.1.3 |
chPerfCurrRxLoadChannel average user rx load within the latest 15 minutes,
this statistic datum is calculated by user data octets
received by the channel within the 15 minutes over the
total channel available load ( which depends on physical
interface speed).ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.1.4 |
chPerfCurrTotalTxLoadchannel total tx load within the latest 15 minutes,
this statistic datum is calculated by the total data octets
sent by the channel within the 15 minutes over the channel
available load ( which depends on physical interface
speed).ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.1.5 |
chPerfCurrTotalRxLoadchannel total rx load within the latest 15 minutes,
this statistic datum is calculated by total data octets
received by the channel within the 15 minutes over the
channel total available load ( which depends on physical
interface speed).ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.1.6 |
chPerfCurrLoadToDceRealTimeThis object displays the channel load tx within current TC
( 1 sec.), this variable is calculated by total octets
transmitted over the capacity of this channel.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.1.7 |
chPerfCurrLoadToDteRealTimeThis object displays the channel load rx within current TC
( 1 sec.), this variable is calculated by total octets
received over the capacity of this channel.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.1.8 |
chanPerfIntvTableProbe channel performance table, which displays
the performance statistic data based on the probe
channel within previous 24 hours. SEQUENCE OF ChanPerfIntvEntry .1.3.6.1.4.1.498.22.1.2.3.2 |
chanPerfIntvEntryIdentifies an entry (row) in probe channel performance
table. ChanPerfIntvEntry .1.3.6.1.4.1.498.22.1.2.3.2.1 |
chPerfIntvIndexIdentifies an entry (row) in historical PVC performance
table, total 96 time intervals, where 1 is the most
recently completed 15 minutes interval and 96 is the
least recently completed 15 minutes interval (assuming
that all 96 intervals are valid).ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.2.1.1 |
chPerfIntvUnavailToDteThis object identifies the channel unavailability due to
remote DTE fault within a 15 minutes interval. This
statistic datum is calculated by the channel unavailable
time over the full time interval.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.2.1.2 |
chPerfIntvUnavailToDceThis object identifies the channel unavailability due to
local DTE fault within a 15 minutes interval. This
statistic datum is calculated by the channel unavailable
time over the full time interval.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.2.1.3 |
chPerfIntvTxLoadchannel average user tx load within a 15 minutes
interval,this statistic datum is calculated by user data
octets sent by the channel within the 15 minutes over the
total channel available load ( which depends on physical
interface speed).ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.2.1.4 |
chPerfIntvRxLoadchannel average user rx load within a 15 minutes interval,
this statistic datum is calculated by user data octets
received by the channel within the 15 minutes over the
total channel available load( which depends on physical
interface speed).ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.2.1.5 |
chPerfIntvTotalTxLoadchannel total tx load within a 15 minutes interval,
this statistic datum is calculated by the total data octets
sent by the channel within the 15 minutes over the total
channel available load ( which depends on physical
interface speed).ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.2.1.6 |
chPerfIntvTotalRxLoadChannel total rx load within a 15 minutes interval,
this statistic datum is calculated by the total data octets
received by the channel within the 15 minutes over the total
channel available load ( which depends on physical interface
speed).ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.2.1.7 |
pvcPerfCurrTablePVC performance table, which displays
the performance statistic data based on
each PVC. SEQUENCE OF PvcPerfCurrEntry .1.3.6.1.4.1.498.22.1.2.3.3 |
pvcPerfCurrEntryIdentifies an entry (row) in pvc statistic table PvcPerfCurrEntry .1.3.6.1.4.1.498.22.1.2.3.3.1 |
pvcPerfCurrDlciIndexThis index value which uniquely identifies the PVC
number to which this entry is applicable.ro INTEGER ( 16..991 ) .1.3.6.1.4.1.498.22.1.2.3.3.1.1 |
pvcPerfCurrRtdProbe token average round trip time within the latest
15 minutes for a specific PVC.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.3.1.2 |
pvcPerfCurrUnavailToDteThis object identifies the PVC average unavailability
within the latest 15 minutes. This statistic datum is
calculated by a PVC unavailable time due to the network
or remote DTE fault over the full time interval.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.3.1.3 |
pvcPerfCurrUnavailToDceThis object identifies the PVC average unavailability
within the latest 15 minutes. This statistic datum is
calculated by a PVC unavailable time due to the local
DTE fault over the full time interval.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.3.1.4 |
pvcPerfCurrTxLoadThis object identifies the PVC average user tx load within
the latest 15 minutes. This statistic datum is calculated
by user data octets sent by a specific PVC within the 15
minutes over the PVC total available load. If the CIR is
correctly defined for this PVC, PVC available load will
depend on CIR, otherwise, it will get from interface
speed.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.3.1.5 |
pvcPerfCurrRxLoadThis object identifies the PVC average user rx load within
the latest 15 minutes. This statistic datum is calculated
by user data octets received by a specific PVC within the
15 minutes over the PVC total available load. If the CIR
is correctly defined for this PVC, PVC available load will
depend on CIR, otherwise, it will get from interface
speed.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.3.1.6 |
pvcPerfCurrTotalTxLoadThis object identifies the PVC total tx load within the
latest 15 minutes. This statistic datum is calculated by
total data octets sent by a specific PVC within the 15
minutes over the PVC total available load. If the CIR is
correctly defined for this PVC, PVC available load will
depend on CIR, otherwise, it will get from interface
speed.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.3.1.7 |
pvcPerfCurrTotalRxLoadThis object identifies the PVC total rx load within the
latest 15 minutes. This statistic datum is calculated by
total data octets received by a specific PVC within the 15
minutes over the PVC total available load. If the CIR is
correctly defined for this PVC, PVC available load will
depend on CIR, otherwise, it will get from interface
speed.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.3.1.8 |
pvcPerfCurrCirToNetExceedThis object identifies the number of exceeding CIR times
that the network detected within the current interval.
The measurement is done for every Tc, and the direction
is to the network.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.3.1.9 |
pvcPerfCurrEirToNetExceedThis object identifies the number of exceeding EIR times
that the network detected within the current interval.
The measurement is done for every Tc, and the direction
is to the network.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.3.1.10 |
pvcPerfCurrTxFrameLossThis object identifies the percentage of tx loss of frames
within the total tx frames for this PVC.ro Enumeration .1.3.6.1.4.1.498.22.1.2.3.3.1.11 |
pvcPerfCurrRxFrameLossThis object identifies the percentage of rx loss of frames
within the total rx frames for this PVC.ro Enumeration .1.3.6.1.4.1.498.22.1.2.3.3.1.12 |
pvcPerfIntvTablePVC performance interval table, which displays
the performance statistic data based on each
PVC in previous 24 hours. SEQUENCE OF PvcPerfIntvEntry .1.3.6.1.4.1.498.22.1.2.3.4 |
pvcPerfIntvEntryIdentifies an entry (row) in pvc statistic table PvcPerfIntvEntry .1.3.6.1.4.1.498.22.1.2.3.4.1 |
pvcPerfIntvDlciIndexThis index value which uniquely identifies the PVC
number to which this entry is applicable.ro INTEGER ( 16..991 ) .1.3.6.1.4.1.498.22.1.2.3.4.1.1 |
pvcPerfIntvIndexIdentifies an entry (row) in historical PVC performance
table,total 96 time intervals, where 1 is the most
recently completed 15 minutes interval and 96 is the
least recently completed 15 minutes interval (assuming
that all 96 intervals are valid).ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.4.1.2 |
pvcPerfIntvRtdProbe token average round trip time within a
15 minutes interval for a specific PVC.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.4.1.3 |
pvcPerfIntvUnavailToDteThis object identifies the PVC average unavailability
within a 15 minutes. This statistic datum is
calculated by a PVC unavailable time due to the network
or remote DTE fault over the full time interval.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.4.1.4 |
pvcPerfIntvUnavailToDceThis object identifies the PVC average unavailability
within a 15 minutes. This statistic datum is
calculated by a PVC unavailable time due to the local DTE
fault over the full time interval.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.4.1.5 |
pvcPerfIntvTxLoadThis object identifies the PVC average user tx load within
a 15 minutes interval. This statistic datum is calculated
by user data octets sent by a specific PVC within the 15
minutes over the PVC total available load. If the CIR is
correctly defined for this PVC, PVC available load will
depend on CIR, otherwise, it will get from interface
speed.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.4.1.6 |
pvcPerfIntvRxLoadThis object identifies the PVC average user rx load within
a 15 minutes interval. This statistic datum is calculated
by user data octets received by a specific PVC within the
15 minutes over the PVC total available load. If the CIR
is correctly defined for this PVC, PVC available load will
depend on CIR, otherwise, it will get from interface
speed.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.4.1.7 |
pvcPerfIntvTotalTxLoadThis object identifies the PVC total tx load within
a 15 minutes interval. This statistic datum is calculated
by total data octets sent by a specific PVC within the 15
minutes over the PVC total available load. If the CIR is
correctly defined for this PVC, PVC available load will
depend on CIR, otherwise, it will get from interface
speed.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.4.1.8 |
pvcPerfIntvTotalRxLoadThis object identifies the PVC total rx load within
a 15 minutes interval. This statistic datum is calculated
by total data octets received by a specific PVC within
the 15 minutes over the PVC total available load. If the
CIR is correctly defined for this PVC, PVC available
load will depend on CIR, otherwise, it will get from
interface speed.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.4.1.9 |
pvcPerfIntvCirToNetExceedThis object identifies the number of exceeding CIR times
that the network detected within an interval. The
measurement is done for every Tc, and the direction is
to the network.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.4.1.10 |
pvcPerfIntvEirToNetExceedThis object identifies the number of exceeding EIR times
that the network detected within an interval. The
measurement is done for every Tc, and the direction is to
the network.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.4.1.11 |
pvcPerfIntvTxFrameLossThis object identifies the percentage of tx loss of frames
within the total tx frames for this PVC in this interval.ro Enumeration .1.3.6.1.4.1.498.22.1.2.3.4.1.12 |
pvcPerfIntvRxFrameLossThis object identifies the percentage of rx loss of frames
within the total rx frames for this PVC in this interval.ro Enumeration .1.3.6.1.4.1.498.22.1.2.3.4.1.13 |
pvcPerfRealTimeTablePVC performance table, which displays
the performance statistic data based on
each PVC. SEQUENCE OF PvcPerfRealTimeEntry .1.3.6.1.4.1.498.22.1.2.3.5 |
pvcPerfRealTimeEntryIdentifies an entry (row) in pvc statistic table PvcPerfRealTimeEntry .1.3.6.1.4.1.498.22.1.2.3.5.1 |
pvcPerfRealTimeDlciIndexThis index value which uniquely identifies the PVC
number to which this entry is applicable.ro INTEGER ( 16..991 ) .1.3.6.1.4.1.498.22.1.2.3.5.1.1 |
pvcPerfRealTimeRtdProbe token real time round trip delay in msec. for a PVC,
it is calculated every Probe Poll interval
(1 to 60 sec.).ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.5.1.2 |
pvcPerfRealTimeLoadToDCEThis object displays the PVC load to DCE within current TC
( 1 sec.), this variable is calculated by total octets
transmitted to DTE over the CIR of this PVC.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.5.1.3 |
pvcPerfRealTimeLoadToDTEThis object displays the PVC load to DTE within current TC
( 1 sec.), this variable is calculated by total octets
transmitted to DCE over the CIR of this PVC.ro INTEGER .1.3.6.1.4.1.498.22.1.2.3.5.1.4 |
trapStatus OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.2.4 |
alarmStatus OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.2.4.1 |
alarmCurrentStatusBitsMapThis parameter is a bitmap for the 6 enterprise specific
traps. A bit value of one means the trap is active. A
bit value of zero means the trap is clear.
1st bit = avgChanLoadToDTE_trap;
2nd bit = realTimeChanLoadToDTE_trap;
3rd bit = avgChanLoadToDCE_trap;
4th bit = realTimeChanLoadToDCE_trap;
5th bit = networkLmiInterfaceDown_trap;
6th bit = userLmiInterfaceDown_trap;ro INTEGER .1.3.6.1.4.1.498.22.1.2.4.1.1 |
alarmCurrentStatusTablePVC table which lists PVCs and alarm status. SEQUENCE OF AlarmStatusEntry .1.3.6.1.4.1.498.22.1.2.4.1.2 |
alarmStatusEntryIdentifies an entry (row) in PVC alarm status table. AlarmStatusEntry .1.3.6.1.4.1.498.22.1.2.4.1.2.1 |
alarmStatusTableIndexIdentifies an entry (row) in the alarm status
table.ro INTEGER ( 16..991 ) .1.3.6.1.4.1.498.22.1.2.4.1.2.1.1 |
currentStatusBitsMapThis parameter is a bitmap for the 14 enterprise specific traps. A bit
value of one means the trap is active. A bit value of zero means the trap
is clear.
1st bit = avgPvcNotAvailToDCE_trap;
2nd bit = avgPvcNotAvailToDTE_trap;
3rd bit = avgPvcRoundTripDelay_trap;
4th bit = realTimePvcRoundTripDelay_trap;
5th bit = avgPvcBecnFrames_trap;
6th bit = avgPvcFecnFrames_trap;
7th bit = avgPvcLoadToDTE_trap;
8th bit = realTimePvcLoadToDTE_trap;
9th bit = avgPvcLoadToDCE_trap;
10th bit = realTimePvcLoadToDCE_trap;
11th bit = avgPvcCIRExceedToDTE_trap;
12th bit = avgPvcEIRExceedToDTE_trap;
13th bit = avgPvcLossFrameTx_trap;
14th bit = avgPvcLossFrameRx_trap;ro INTEGER .1.3.6.1.4.1.498.22.1.2.4.1.2.1.2 |