GDCSC616-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
149
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
149 total| Object Name |
|---|
gdc OBJECT IDENTIFIER .1.3.6.1.4.1.498 |
RFC1213-MIB Unknown .1.3.6.1.4.1.498 |
bql OBJECT IDENTIFIER .1.3.6.1.4.1.498.10 |
bqlMIBVersionThe version number of the MIB, to allow products to
know which MIB is being supported. The version number
will be x.yzT where x is a major revision (1-9), y is a minor
revision(0-9), z is a typo revision (0-9) and T indicates the
MIB is still a test revision(A-Z). When a release is complete
no T should exist.ro DisplayString .1.3.6.1.4.1.498.10.1 |
bqlWhatAreYouTableThe GDC SC616, DC610, DC612, GT 128 What Are You Table. SEQUENCE OF BqlWhatAreYouEntry .1.3.6.1.4.1.498.10.2 |
bqlWhatAreYouEntryAn entry in the GDC SC616 What Are You table. BqlWhatAreYouEntry .1.3.6.1.4.1.498.10.2.1 |
bqlWhatAreYouIndexThis object is the identifier of the SC616 What Are You table.ro SCinstance .1.3.6.1.4.1.498.10.2.1.1 |
bqlBaseCardTypeThis function returns the value the Base Card Type.ro Enumeration .1.3.6.1.4.1.498.10.2.1.2 |
bqlOptionCardThis indicates whether the option card is installed or not
on the DC610 or DC612.ro Enumeration .1.3.6.1.4.1.498.10.2.1.3 |
bqlDTE2CardTypeThis object is the DTE channel 2 plug-in card type on the
DC610 or DC612.ro Enumeration .1.3.6.1.4.1.498.10.2.1.4 |
bqlDTE1CardTypeThis object is the DTE channel 1 plug-in card type on the
DC610 or DC612 or GT 128.ro Enumeration .1.3.6.1.4.1.498.10.2.1.5 |
bqlCodeRevThis function returns the firmware code level.
Example A- ,B-ro DisplayString .1.3.6.1.4.1.498.10.2.1.6 |
bqlAlarmStatusThe current alarms of the unit without the alarm masks.ro OCTET STRING .1.3.6.1.4.1.498.10.2.1.7 |
bqlConfigTableThe GDC SC616, DC610, DC612, GT 128 2B1Q configuration table. SEQUENCE OF BqlConfigEntry .1.3.6.1.4.1.498.10.3 |
bqlConfigEntryA listing of GDC 2B1Q SC616 options. BqlConfigEntry .1.3.6.1.4.1.498.10.3.1 |
bqlConfigIndexA unique index for the Configuration Table.ro SCinstance .1.3.6.1.4.1.498.10.3.1.1 |
bqlConfigChnlIndexA unique channel index for the Configuration Table.ro Enumeration .1.3.6.1.4.1.498.10.3.1.2 |
bqlTestPatternObject to select loop and channel test pattern
for SC616, DC610, DC612.rw Enumeration .1.3.6.1.4.1.498.10.3.1.3 |
bqlRLTimeoutObject to select loop and channel remote loop time out
for DC610 and DC612 only.rw Enumeration .1.3.6.1.4.1.498.10.3.1.4 |
bqlRespRLObject to select loop and channel remote loop response
for DC610 and DC612 only.rw Enumeration .1.3.6.1.4.1.498.10.3.1.5 |
bqlRLTypeObject to select loop and channel remote loop type
for DC610 and DC612 only.rw Enumeration .1.3.6.1.4.1.498.10.3.1.6 |
bqlBilateralRLObject to select loop and channel bilateral remote loop
for DC610 and DC612 only.rw Enumeration .1.3.6.1.4.1.498.10.3.1.7 |
bqlInbandRTSDCDObject to select loop and channel in-band RTS/DCD
for DC610 and DC612 only.rw Enumeration .1.3.6.1.4.1.498.10.3.1.8 |
bqlRTSObject to select loop and channel RTS
for DC610 and DC612 only.rw Enumeration .1.3.6.1.4.1.498.10.3.1.9 |
bqlRTSCTSDelayObject to select loop and channel RTS/CTS delay
for DC610 and DC612 only.rw Enumeration .1.3.6.1.4.1.498.10.3.1.10 |
bqlAntiStreamObject to select loop and channel Anti-streaming
for DC610 and DC612 only.rw Enumeration .1.3.6.1.4.1.498.10.3.1.11 |
bqlTXDataElasticBufrObject to select loop and channel transmit data
elastic buffer for DC610 and DC612 only.rw Enumeration .1.3.6.1.4.1.498.10.3.1.12 |
bqlRTSCTSDelayTimeObject to select loop and channel RTS to CTS
delay time for DC610 and DC612 only.rw Enumeration .1.3.6.1.4.1.498.10.3.1.13 |
bqlAntiStreamTimeObject to select loop and channel anti-streaming
time for DC610 and DC612 only.rw Enumeration .1.3.6.1.4.1.498.10.3.1.14 |
bqlConfig1TableThe GDC SC616, DC610, DC612 2B1Q configuration 1 table. SEQUENCE OF BqlConfig1Entry .1.3.6.1.4.1.498.10.4 |
bqlConfig1EntryA listing of GDC 2B1Q SC616 options. BqlConfig1Entry .1.3.6.1.4.1.498.10.4.1 |
bqlConfig1IndexA unique index for the Configuration Table.ro SCinstance .1.3.6.1.4.1.498.10.4.1.1 |
bqlFrontPanelObject used to enable or disable the units front panel
switches.rw Enumeration .1.3.6.1.4.1.498.10.4.1.2 |
bqlSoftHardObject used to read how the unit is configured.ro Enumeration .1.3.6.1.4.1.498.10.4.1.3 |
bqlDteStatusObject used to read the status of the DTE interface.ro OCTET STRING .1.3.6.1.4.1.498.10.4.1.4 |
bqlConfig2TableThe GDC SC616 2B1Q configuration 2 table. SEQUENCE OF BqlConfig2Entry .1.3.6.1.4.1.498.10.5 |
bqlConfig2EntryA listing of GDC 2B1Q SC616 options. BqlConfig2Entry .1.3.6.1.4.1.498.10.5.1 |
bqlConfig2IndexA unique index for the Configuration Table.ro SCinstance .1.3.6.1.4.1.498.10.5.1.1 |
bqlMasterTXClkSrcObject to option the Loop master transmit clock source. This is
for the SC616 only.rw Enumeration .1.3.6.1.4.1.498.10.5.1.2 |
bqlDiagnosticTableThe GDC SC616 diagnostics table. SEQUENCE OF BqlDiagnosticEntry .1.3.6.1.4.1.498.10.6 |
bqlDiagnosticEntryA listing of GDC SC616 diagnostic tests BqlDiagnosticEntry .1.3.6.1.4.1.498.10.6.1 |
bqlDiagnosticIndexA unique index for the Diagnostic Table.ro SCinstance .1.3.6.1.4.1.498.10.6.1.1 |
bqlDiagnosticChnlIndexA unique channel index for the Channel the test will run on.ro Enumeration .1.3.6.1.4.1.498.10.6.1.2 |
bqlDiagnosticTestThis function selects or reads the test.
0 = no test currently operating
1 = remote loopback test
2 = channel loopback test
4 = data loopback test
8 = selftest
16 = line loopback test
32 = terminate test
All other values are test combinations such as
9 = selftest and remote loopback.rw INTEGER .1.3.6.1.4.1.498.10.6.1.3 |
bqlDiagnosticLengthThis function selects the test time length. Where 0
is test indefinitely and 1 to 127 are seconds.rw INTEGER .1.3.6.1.4.1.498.10.6.1.4 |
bqlDiagnosticActiveThis function represents the test condition.ro Enumeration .1.3.6.1.4.1.498.10.6.1.5 |
bqlDiagnosticResultsThis function reads the self test results in
bit errors.ro INTEGER .1.3.6.1.4.1.498.10.6.1.6 |
bqlSC616Alarm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.7 |
bqlAlarmData OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.7.1 |
bqlNoResponseAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.7.1.1 |
bqlDiagRxErrAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.7.1.2 |
bqlPowerUpAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.7.1.3 |
bqlLp2B1QOutofSyncAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.7.1.4 |
bqlLpChn1ElasBufrOverUnderFlowAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.7.1.5 |
bqlLpChn2ElasBufrOverUnderFlowAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.7.1.6 |
bqlLpChn1ExtTxClkAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.7.1.7 |
bqlLpChn2ExtTxClkAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.7.1.8 |
bqlLpSealingCurrentNoContinuityAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.7.1.9 |
bqlSC616LEDStatusTableThe GDC SC616 LED Status Table. SEQUENCE OF BqlSC616LEDEntry .1.3.6.1.4.1.498.10.8 |
bqlSC616LEDEntryAn entry in the GDC SC616 LED Status table. BqlSC616LEDEntry .1.3.6.1.4.1.498.10.8.1 |
bqlSC616LEDIndexThis object is the index of the SC616 LED Status table.ro SCinstance .1.3.6.1.4.1.498.10.8.1.1 |
bqlSC616LEDStatusThe GDC SC616 front panel LED Status.
A value of 1 means on, 0 is off.
byte 1 bit 7 (1.7) - not used
1.6 - test mode
1.5 - alarm on
1.4 - loop 1 line loopback
1.3 - loop 1 channel 1 send data transitions
1.2 - loop 1 channel 1 receive data transitions
1.1 - loop 1 channel 2 send data transitions
1.0 - loop 1 channel 2 receive data transitions
2.7 - not used
2.6 - not used
2.5 - not used
2.4 - loop 2 line loopback
2.3 - loop 2 channel 1 send data transitions
2.2 - loop 2 channel 1 receive data transitions
2.1 - loop 2 channel 2 send data transitions
2.0 - loop 2 channel 2 receive data transitions
3.7 - not used
3.6 - not used
3.5 - not used
3.4 - loop 3 line loopback
3.3 - loop 3 channel 1 send data transitions
3.2 - loop 3 channel 1 receive data transitions
3.1 - loop 3 channel 2 send data transitions
3.0 - loop 3 channel 2 receive data transitionsro OCTET STRING .1.3.6.1.4.1.498.10.8.1.2 |
bqlDC610Alarm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.9 |
bqlDC610AlarmData OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.9.1 |
bqlDC610PowerUpAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.9.1.1 |
bqlDC610Chnl1DTRAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.9.1.2 |
bqlDC610NoResponseAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.9.1.3 |
bqlDC610DiagRxErrAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.9.1.4 |
bqlDC610LEDStatusTableThe GDC DC610 LED Status Table. SEQUENCE OF BqlDC610LEDEntry .1.3.6.1.4.1.498.10.10 |
bqlDC610LEDEntryAn entry in the GDC DC610 LED Status table. BqlDC610LEDEntry .1.3.6.1.4.1.498.10.10.1 |
bqlDC610LEDIndexThis object is the index of the DC610 LED Status table.ro SCinstance .1.3.6.1.4.1.498.10.10.1.1 |
bqlDC610LEDStatusThe GDC DC610 front panel LED Status.
A value of 1 means on, 0 is off.
byte 1 bit 7 (1.7) - not used
1.6 - test mode
1.5 - sync
1.4 - request to send
1.3 - clear to send
1.2 - carrier on
1.1 - send data transitions
1.0 - receive data transitionsro OCTET STRING .1.3.6.1.4.1.498.10.10.1.2 |
bqlDC612Alarm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.11 |
bqlDC612AlarmData OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.11.1 |
bqlDC612PowerUpAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.11.1.1 |
bqlDC612Chnl1DTRAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.11.1.2 |
bqlDC612Chnl2DTRAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.11.1.3 |
bqlDC612NoResponseAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.11.1.4 |
bqlDC612DiagRxErrAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.11.1.5 |
bqlDC612LEDStatusTableThe GDC DC612 LED Status Table. SEQUENCE OF BqlDC612LEDEntry .1.3.6.1.4.1.498.10.12 |
bqlDC612LEDEntryAn entry in the GDC DC612 LED Status table. BqlDC612LEDEntry .1.3.6.1.4.1.498.10.12.1 |
bqlDC612LEDIndexThis object is the index of the DC612 LED Status table.ro SCinstance .1.3.6.1.4.1.498.10.12.1.1 |
bqlDC612LEDStatusThe GDC DC612 front panel LED Status.
A value of 1 means on, 0 is off.
byte 1 bit 7 (1.7) - not used
1.6 - not used
1.5 - not used
1.4 - not used
1.3 - not used
1.2 - not used
1.1 - channel 1 selected for front panel pushbutton operation
1.0 - channel 2 selected for front panel pushbutton operation
2.7 - not used
2.6 - channel 1 test mode
2.5 - channel 1 sync
2.4 - channel 1 request to send
2.3 - channel 1 clear to send
2.2 - channel 1 carrier on
2.1 - channel 1 send data transitions
2.0 - channel 1 receive data transitions
3.7 - not used
3.6 - channel 2 test mode
3.5 - channel 2 sync
3.4 - channel 2 request to send
3.3 - channel 2 clear to send
3.2 - channel 2 carrier on
3.1 - channel 2 send data transitions
3.0 - channel 2 receive data transitionscdro OCTET STRING .1.3.6.1.4.1.498.10.12.1.2 |
bqlControlTableThe GDC SC616 Control Table. SEQUENCE OF BqlControlEntry .1.3.6.1.4.1.498.10.13 |
bqlControlEntryAn entry in the GDC SC616 Control table. BqlControlEntry .1.3.6.1.4.1.498.10.13.1 |
bqlControlIndexThis object is the identifier of the SC616 Control table.ro SCinstance .1.3.6.1.4.1.498.10.13.1.1 |
bqlSoftResetForces a soft reset on the network element.
The reset selection is write only. The normal
selection is read only.rw Enumeration .1.3.6.1.4.1.498.10.13.1.2 |
bqlEraseConfigForces an erase of the stored configuration in the
network element. The erase selection is write only.
The normal selection is read only.rw Enumeration .1.3.6.1.4.1.498.10.13.1.3 |
bqlCurrentTableThe SC616 Current table. SEQUENCE OF BqlCurrentEntry .1.3.6.1.4.1.498.10.14 |
bqlCurrentEntryAn entry in the SC616 Current table. BqlCurrentEntry .1.3.6.1.4.1.498.10.14.1 |
bqlCurrentIndexThe index value which uniquely identifies the
SC616 DC610 or DC612 interface to which this entry
is applicable.ro SCinstance .1.3.6.1.4.1.498.10.14.1.1 |
bqlCurrentESsThe number of Errored Seconds, encountered by
an ISDN interface in the current 15 minute interval.
This is defined as a second with at least one
CRC error event or one or more out of frames (OOF).ro Gauge .1.3.6.1.4.1.498.10.14.1.2 |
bqlCurrentBESsThe number of Bursty Errored Seconds (BESs)
encountered by an ISDN interface in the current
15 minute interval.
This is defined as a second with more than one but
less than 640 CRC error events.ro Gauge .1.3.6.1.4.1.498.10.14.1.3 |
bqlCurrentSESsThe number of Severely Errored Seconds encoun-
tered by an ISDN interface in the current 15
minute interval.
This is defined as a second with 640 or more CRC
error events or one or more out of frames (OOF).ro Gauge .1.3.6.1.4.1.498.10.14.1.4 |
bqlCurrentUASsThe number of Unavailable Seconds encountered
by an ISDN interface in the current 15 minute interval.
This is a count of one-second intervals during which
service is not available.ro Gauge .1.3.6.1.4.1.498.10.14.1.5 |
bqlCurrentStatsThe number of ES, BES, ESE and UAS encountered
by an ISDN interface in the current 15 minute interval.
This is a count of one-second intervals during which
service is not available.ro OCTET STRING .1.3.6.1.4.1.498.10.14.1.6 |
bqlIntervalTableThe SC616 Interval table. SEQUENCE OF BqlIntervalEntry .1.3.6.1.4.1.498.10.15 |
bqlIntervalEntryAn entry in the SC616 Interval table. BqlIntervalEntry .1.3.6.1.4.1.498.10.15.1 |
bqlIntervalIndexThe index value which uniquely identifies the
ISDN interface to which this entry is applicable.ro SCinstance .1.3.6.1.4.1.498.10.15.1.1 |
bqlIntervalNumberA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minute inter-
val (assuming that all 96 intervals are
valid).ro INTEGER .1.3.6.1.4.1.498.10.15.1.2 |
bqlIntervalESsThe number of Errored Seconds encountered by a
DS1 interface in one of the previous 96,
individual 15 minute, intervals.
This is defined as a second with at least one
CRC error event or one or more out of frames (OOF).ro Gauge .1.3.6.1.4.1.498.10.15.1.3 |
bqlIntervalBESsThe number of Bursty Errored Seconds (BESs)
encountered by an ISDN interface in one of the
previous 96, individual 15 minute, intervals.
This is defined as a second with more than one but
less than 640 CRC error events.ro Gauge .1.3.6.1.4.1.498.10.15.1.4 |
bqlIntervalSESsThe number of Severely Errored Seconds encoun-
tered by an ISDN interface in one of the previous
96, individual 15 minute, intervals.
This is defined as a second with 640 or more CRC
error events or one or more out of frames (OOF).ro Gauge .1.3.6.1.4.1.498.10.15.1.5 |
bqlIntervalUASsThe number of Unavailable Seconds encountered
by an ISDN interface in one of the previous 96,
individual 15 minute, intervals.
This is a count of one-second intervals during which
service is not available.ro Gauge .1.3.6.1.4.1.498.10.15.1.6 |
bqlIntervalStatsThe number of ES, BES, SES, and UAS encountered
by an ISDN interface in one of the previous 96,
individual 15 minute, intervals.
This is a count of one-second intervals during which
service is not available.ro OCTET STRING .1.3.6.1.4.1.498.10.15.1.7 |
bqlTotalTableThe SC616 Total table. 24 hour interval. SEQUENCE OF BqlTotalEntry .1.3.6.1.4.1.498.10.16 |
bqlTotalEntryAn entry in the SC616 Total table. BqlTotalEntry .1.3.6.1.4.1.498.10.16.1 |
bqlTotalIndexThe index value which uniquely identifies the
ISDN interface to which this entry is applicable.ro SCinstance .1.3.6.1.4.1.498.10.16.1.1 |
bqlTotalESsThe number of Errored Seconds encountered by an
ISDN interface in the previous 24 hour interval.
This is defined as a second with at least one
CRC error event or one or more out of frames (OOF).ro Gauge .1.3.6.1.4.1.498.10.16.1.2 |
bqlTotalBESsThe number of Bursty Errored Seconds (BESs)
encountered by an ISDN interface in the previous
24 hour interval.
This is defined as a second with more than one but
less than 640 CRC error events.ro Gauge .1.3.6.1.4.1.498.10.16.1.3 |
bqlTotalSESsThe number of Severely Errored Seconds encoun-
tered by an ISDN interface in the previous 24
hour interval.
This is defined as a second with 640 or more CRC
error events or one or more out of frames (OOF).ro Gauge .1.3.6.1.4.1.498.10.16.1.4 |
bqlTotalUASsThe number of Unavailable Seconds encountered
by an ISDN interface in the previous 24 hour interval.
This is a count of one-second intervals during which
service is not available.ro Gauge .1.3.6.1.4.1.498.10.16.1.5 |
bqlTotalStatsThe number of ES, BES, SES and UAS encountered
by an ISDN interface in the previous 24 hour interval.
This is a count of one-second intervals during which
service is not available.ro OCTET STRING .1.3.6.1.4.1.498.10.16.1.6 |
bqlDTERateTableThe DC610 DC612 DTE rate table. SEQUENCE OF BqlDTEEntry .1.3.6.1.4.1.498.10.17 |
bqlDTEEntryAn entry in the DC610 DC612 table. BqlDTEEntry .1.3.6.1.4.1.498.10.17.1 |
bqlDTEIndexThe index value which uniquely identifies the
DC610 DC612 interface to which this entry is
applicable.ro SCinstance .1.3.6.1.4.1.498.10.17.1.1 |
bqlDTE2MappedForces a DC612 to map DTE channel 2 into channel 2 or channel 1.rw Enumeration .1.3.6.1.4.1.498.10.17.1.2 |
bqlDTE2DataRateForces a DC612 DTE channel 2 to a K bit per second rate.rw Enumeration .1.3.6.1.4.1.498.10.17.1.3 |
bqlDTE1MappedForces a DC610 or DC612 to map DTE channel 1 into channel 1 or channel 2.rw Enumeration .1.3.6.1.4.1.498.10.17.1.4 |
bqlDTE1DataRateForces a DC610 or DC612 DTE channel 1 to a K bit per second rate.rw Enumeration .1.3.6.1.4.1.498.10.17.1.5 |
bqlIntervalMaintenanceTableThe SC616, DC610, DC612 Loop Interval Maintenance table. SEQUENCE OF BqlIntervalMaintenanceEntry .1.3.6.1.4.1.498.10.18 |
bqlIntervalMaintenanceEntryThe SC616, DC610, DC612 Interval Maintenance table entry. BqlIntervalMaintenanceEntry .1.3.6.1.4.1.498.10.18.1 |
bqlIntervalMaintenanceIndexThe index value which uniquely identifies the interface to
which this entry is applicable. This has the form of a
SCinstance which defines the slot, line, drop, and interface,
which in this case is a Loop interface.ro SCinstance .1.3.6.1.4.1.498.10.18.1.1 |
bqlResetIntervalsThis variable is used to reset Loop performance intervals.
When it is set to reset, the Loop performance tables are
reset to zero.rw Enumeration .1.3.6.1.4.1.498.10.18.1.2 |
bqlNumberofValidIntervalsThis variable is used to read the number of intervals collected.
Each interval is an increment of 15 minutes.ro INTEGER .1.3.6.1.4.1.498.10.18.1.3 |
bqlDC610LEDStatusNZTableThe GDC DC610NZ LED Status Table. SEQUENCE OF BqlDC610LEDNZEntry .1.3.6.1.4.1.498.10.19 |
bqlDC610LEDNZEntryAn entry in the GDC DC610NZ LED Status table. BqlDC610LEDNZEntry .1.3.6.1.4.1.498.10.19.1 |
bqlDC610LEDNZIndexThis object is the index of the DC610 LED Status table.ro SCinstance .1.3.6.1.4.1.498.10.19.1.1 |
bqlDC610LEDNZStatusThe GDC DC610NZ front panel LED Status.
A value of 1 means on, 0 is off.
byte 1 bit 7 (1.7) - not used
1.6 - test mode
1.5 - 128K (sync )
1.4 - request to send
1.3 - clear to send
1.2 - network available (carrier on)
1.1 - send data transitions
1.0 - receive data transitionsro OCTET STRING .1.3.6.1.4.1.498.10.19.1.2 |
bqlGT128Alarm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.20 |
bqlGT128AlarmData OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.20.1 |
bqlGT128NoResponseAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.20.1.1 |
bqlGT128DiagRxErrAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.20.1.2 |
bqlGT128PowerUpAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.20.1.3 |
bqlGT128Chnl1DTRAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.20.1.4 |
bqlGT128LEDStatusTableThe GDC GT 128 LED Status Table. SEQUENCE OF BqlGT128LEDEntry .1.3.6.1.4.1.498.10.21 |
bqlGT128LEDEntryAn entry in the GDC GT128 LED Status table. BqlGT128LEDEntry .1.3.6.1.4.1.498.10.21.1 |
bqlGT128LEDIndexThis object is the index of the GT 128 LED Status table.ro SCinstance .1.3.6.1.4.1.498.10.21.1.1 |
bqlGT128LEDStatusThe GDC GT128 front panel LED Status.
A value of 1 means on, 0 is off.
byte 1 bit 7 (1.7) - not used
1.6 - test mode
1.5 - sync
1.4 - request to send
1.3 - clear to send
1.2 - carrier on
1.1 - send data transitions
1.0 - receive data transitions
2.6 - fu
2.5 - fu
2.4 - fu
2.3 - fu
2.2 - remote loopback ON
2.1 - selftest ON
2.0 - line loopback ONro OCTET STRING .1.3.6.1.4.1.498.10.21.1.2 |
bqlGT128NZAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.22 |
bqlGT128NZAlarmData OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.22.1 |
bqlGT128NZNoResponseAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.22.1.1 |
bqlGT128NZDiagRxErrAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.22.1.2 |
bqlGT128NZPowerUpAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.22.1.3 |
bqlGT128NZChnl1DTRAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.10.22.1.4 |
bqlGT128LEDNZStatusTableThe GDC GT 128 NZ LED Status Table. SEQUENCE OF BqlGT128LEDNZEntry .1.3.6.1.4.1.498.10.23 |
bqlGT128LEDNZEntryAn entry in the GDC GT128 NZ LED Status table. BqlGT128LEDNZEntry .1.3.6.1.4.1.498.10.23.1 |
bqlGT128LEDNZIndexThis object is the index of the GT 128 NZ LED Status table.ro SCinstance .1.3.6.1.4.1.498.10.23.1.1 |
bqlGT128LEDNZStatusThe GDC GT128 NZ front panel LED Status.
A value of 1 means on, 0 is off.
byte 1 bit 7 (1.7) - not used
1.6 - test mode
1.5 - 128K (sync)
1.4 - request to send
1.3 - clear to send
1.2 - network available (carrier on)
1.1 - send data transitions
1.0 - receive data transitions
2.6 - fu
2.5 - fu
2.4 - fu
2.3 - fu
2.2 - remote loopback ON
2.1 - selftest ON
2.0 - line loopback ONro OCTET STRING .1.3.6.1.4.1.498.10.23.1.2 |