GDC-SC800T3-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
154
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
154 total| Object Name |
|---|
ds3 OBJECT IDENTIFIER .1.3.6.1.4.1.498.19 |
IMPORTS Unknown .1.3.6.1.4.1.498.19 |
sc800t3 OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1 |
sc800t3Version OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.1 |
sc800t3MIBversionIdentifies the version of the MIB. The format of the version
is x.yzT, where 'x' identifies the major revision number, 'y'
identifies the minor revision number, 'z' identifies the
typographical revision, and T identifies the test revision.
Upon formal release, no designation for the test revision will
be present. Acceptable values for the individual revision
components are as follows:
x: 1 - 9, y: 0 - 9, z: 0 - 9, T: A - Zro DisplayString .1.3.6.1.4.1.498.19.1.1.1 |
sc800t3VersionTable SEQUENCE OF Sc800t3VersionEntry .1.3.6.1.4.1.498.19.1.1.2 |
sc800t3VersionEntryAn entry in the GDC SC800T3 Version Table. Sc800t3VersionEntry .1.3.6.1.4.1.498.19.1.1.2.1 |
sc800t3VersionIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.1.2.1.1 |
sc800t3ActiveFirmwareRevThe version number of the firmware currently executing.
The format is MM.NN.BB where:
MM: Major Revision (0-99)
NN: Minor Revision (0-99)
BB: Bug Fix Revision (0-99)ro DisplayString .1.3.6.1.4.1.498.19.1.1.2.1.2 |
sc800t3StandbyFirmwareRevThe version number of the firmware stored (in a compressed format)
but not currently executing.
MM: Major Revision (0-99)
NN: Minor Revision (0-99)
BB: Bug Fix Revision (0-99)ro DisplayString .1.3.6.1.4.1.498.19.1.1.2.1.3 |
sc800t3StoredFirmwareStatusThis object represents the state of the Non-Active or Stored firmware:
statBlank(1) Factory Default
statDownLoading(2) In process of downloading firmware
statOK(3) Zipped version checksum succesful (OK to switch)
(can set sc800t3SwitchActive to switchActive(2))
statCheckSumBad(4) Failed checksum after download
statUnZipping(5) In process of uncompressing into active area
statBadUnZip(6) Failed last uncompress
statDownloadAborted(7) Download aborted by userro Enumeration .1.3.6.1.4.1.498.19.1.1.2.1.4 |
sc800t3SwitchActiveFirmwareThis object is used to switch the active executing firmware from the version
in sc800t3ActiveRev to the version in sc800t3StoredRev.
When a switchActive(2) is set (write only) the element will:
1) reboot
2) uncompress stored code into active area
3) perform checksum on active area
4) Set sc800t3StoredStatus object to indicate results
5) If succesfull:
update sc800t3ActiveFirmwareRev and sc800t3StoredFirmwareRev
and begin executing
If failed:
replace active area with previous revision
The switchNorm(1) enumeration will always be read.
Setting switchActive(2) when the sc800t3StoredStatus is not statOK(3) will
result in an error.rw Enumeration .1.3.6.1.4.1.498.19.1.1.2.1.5 |
sc800t3DownloadingModeThis object is used to configure the download mode:
disableAll(1) Prevents any firmware downloading to SC800T3
enableAndWait(2) Allows downloading zipped code to be stored
only!
enableAndSwitch(3) Allows downloading and then unzips and begins
executing the new coderw Enumeration .1.3.6.1.4.1.498.19.1.1.2.1.6 |
sc800t3EraseFlashA set of this object to erase(2) will erase the application
stored in flash. After setting this object, there should
be a delay of at least 2 minutes before downloading the
unit.rw Enumeration .1.3.6.1.4.1.498.19.1.1.2.1.7 |
sc800t3Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.2 |
sc800t3ChannelConfigTableThe GDC SC800T3 Channel Configuration table. SEQUENCE OF Sc800t3ChannelConfigEntry .1.3.6.1.4.1.498.19.1.2.1 |
sc800t3ChannelConfigEntryThe sc800t3 Channel Configuration table entry. Sc800t3ChannelConfigEntry .1.3.6.1.4.1.498.19.1.2.1.1 |
sc800t3ChannelConfigIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.2.1.1.1 |
sc800t3ForcedDCEControls the operation of Data Communications Equipment (DCE) signal.
The value followsDte(1) indicates that the channel's DCE follows
Data Terminal Equipment (DTE) ready. The value forcedOn(2) indicates
that DCE is forced on.rw Enumeration .1.3.6.1.4.1.498.19.1.2.1.1.2 |
sc800t3ChannelDTEtestDTE interface supporting loop A and loop B tests. See ANSI TIA/EIA-613-1993
specification for details on encoding of inter changes.rw Enumeration .1.3.6.1.4.1.498.19.1.2.1.1.3 |
sc800t3DTELoopTimeoutEnables/disables DTE loop time out.rw Enumeration .1.3.6.1.4.1.498.19.1.2.1.1.4 |
sc800t3NetworkConfigTableThe GDC SC800T3 Network Configuration table. SEQUENCE OF Sc800t3NetworkConfigEntry .1.3.6.1.4.1.498.19.1.2.2 |
sc800t3NetworkConfigEntryThe sc800t3 Network Configuration table entry. Sc800t3NetworkConfigEntry .1.3.6.1.4.1.498.19.1.2.2.1 |
sc800t3NetworkConfigIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.2.2.1.1 |
sc800t3NetworkFrameTypeIs the framing type of the network interface. Setting the
value of the object to m13(1) configures the network interface
to M-13 framing. Setting the value of this object to
cbitParity configures the network interface 20 C-bit parity
framingrw Enumeration .1.3.6.1.4.1.498.19.1.2.2.1.2 |
sc800t3NetworkTransmitClockSourceThe DSU transmit clock source option.
This is the selection for the transmitter
timing clock source.rw Enumeration .1.3.6.1.4.1.498.19.1.2.2.1.3 |
sc800t3NetworkAISLoopdownThe time in seconds when receiving a continuous AIS signal
before a remotely initiated loopback is terminated. When this
object has the value 4, then there is no time limit and the
loop must be terminated by remotely issued in-band loopdown
codes. When the object has a value between 5 and 60, then
this is time in seconds of continuous AIS signal before
the loopback is terminated.rw INTEGER .1.3.6.1.4.1.498.19.1.2.2.1.4 |
sc800t3NetworkLineTypeThe operating mode of the interface. Setting the value of
this object to longCable(1) configures the interface as
standard DS-3. Setting the value of this object to
shortCable(2) configures the interface to operate as a standard
cross-connect DSX-3.rw Enumeration .1.3.6.1.4.1.498.19.1.2.2.1.5 |
sc800t3NetworkIdleStatusReturns a value of received(2) when the sc800t3 receives
a DS3 idle from the network.ro Enumeration .1.3.6.1.4.1.498.19.1.2.2.1.6 |
sc800t3NetworkTransmitIdleStatusWhen set to active(2), the sc800t3 will transmit a DS3 idle
signal to the network.rw Enumeration .1.3.6.1.4.1.498.19.1.2.2.1.7 |
sc800t3NetworkSesBERThresholdWhen set to thresone(1), the SES BER threshold will be set to
1X10^-6 and when it is set to thresseven(2), it will be set to
7.5X10^-5.rw Enumeration .1.3.6.1.4.1.498.19.1.2.2.1.8 |
sc800t3InbandLoopbackEnables/disables the inband loop back.rw Enumeration .1.3.6.1.4.1.498.19.1.2.2.1.9 |
sc800t3Diagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.3 |
sc800t3DiagTableThe SC800T3 Diagnostics table. SEQUENCE OF Sc800t3DiagEntry .1.3.6.1.4.1.498.19.1.3.1 |
sc800t3DiagEntryThe SNMPSC800T3 Diagnostics table entry. Sc800t3DiagEntry .1.3.6.1.4.1.498.19.1.3.1.1 |
sc800t3DiagIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.3.1.1.1 |
sc800t3DiagTestDurationSelects the duration to run a diagnostic test.rw Enumeration .1.3.6.1.4.1.498.19.1.3.1.1.2 |
sc800t3InsertBitErrorA set of 2 will insert one bit error for test.
Management may only write a 2. A 1 will always be read.rw Enumeration .1.3.6.1.4.1.498.19.1.3.1.1.3 |
sc800t3DiagT3TestA set of 2-11 starts the specified test
and a set of t3NoTest(1) stops the current running test. A
get returns the current active test.rw Enumeration .1.3.6.1.4.1.498.19.1.3.1.1.4 |
sc800t3DiagTestResultsReturns a the folowing bytes.
Octet 1 bit 7 - F/U
bit 6 - 1: Test complete
bit 5 - 1: Test aborted
bit 4 - F/U
bit 3 - remote status 0: inactive 1: active
bit 2 - 1: Bit errors over range
bit 1 - Bit Errors
bit 0 - Bit Errors
Octet 2 bit 7 - F/U
bit 6 - 2^13
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9 Bit Error Count
bit 1 - 2^8
bit 0 - 2^7
Octet 3 bit 7 - F/U
bit 6 - 2^6
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0ro OCTET STRING .1.3.6.1.4.1.498.19.1.3.1.1.5 |
sc800t3DiagResetTestResultsThis object will clear the results register while
running any test except for Network Delay.
Starting a new test will automatically zero out
the register.
A normal(1) will always be read. Management will set a
resetTestResult(2) to reset the test results.rw Enumeration .1.3.6.1.4.1.498.19.1.3.1.1.6 |
sc800t3Maintenance OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.4 |
sc800t3MaintenanceTableThe table describes the maintenance functions for the sc800t3. SEQUENCE OF Sc800t3MaintenanceEntry .1.3.6.1.4.1.498.19.1.4.1 |
sc800t3MaintenanceEntryAn entry in the GDC maintenance Table Sc800t3MaintenanceEntry .1.3.6.1.4.1.498.19.1.4.1.1 |
sc800t3MaintenanceIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.4.1.1.1 |
sc800t3LedStatusReturns a bitwise snapshot of the front panel LED state and front panel switches.
Octet 1 bit 7 - f/u
bit 6 - NTWK 0:LED off 1:LED on
bit 5 - TM 0:LED off 1:LED on
bit 4 - ALM 0:LED off 1:LED on
bit 3 - f/u
bit 2 - f/u
bit 1 - f/u
bit 0 - f/u
Octet 2 bit 7 - f/u
bit 6 - f/u
bit 5 - f/u
bit 4 - f/u
bit 3 - f/u
bit 2 - f/u
bit 1 - f/u
bit 0 - f/u
Octet 3 bit 7 - f/u
bit 6 - f/u
bit 5 - f/u
bit 4 - f/u
bit 3 - f/u
bit 2 - f/u
bit 1 - f/u
bit 0 - f/uro OCTET STRING .1.3.6.1.4.1.498.19.1.4.1.1.2 |
sc800t3SoftResetSupports the action of soft resetting the unit. When this
object is set to reset(1), then the unit performs a soft reset.
The value norm will be returned when the reset is complete.
The value of norm can not be set by management.rw Enumeration .1.3.6.1.4.1.498.19.1.4.1.1.3 |
sc800t3DefaultInitThis is used to allow the NonVolatile Configuration to be set to
a factory default state. When this value is set to factoryDefault,
the unit will reset to the default configuration. The value of normal
will be returned when the initialization is complete. The value normal
can not be set by management.rw Enumeration .1.3.6.1.4.1.498.19.1.4.1.1.4 |
sc800t3ValidNearEndIntervalsThe number of previous near end intervals for which
valid data was collected. The value will be 31
unless the interface was brought on-line within
the last 7.75 hours, in which case the value will
be the number of complete 15 minute intervals
since the interface has been online.ro INTEGER .1.3.6.1.4.1.498.19.1.4.1.1.5 |
sc800t3ValidFarEndIntervalsThe number of previous far end intervals for which
valid data was collected. The value will be 31
unless the interface was brought on-line within
the last 7.75 hours, in which case the value will
be the number of complete 15 minute intervals
since the interface has been online.ro INTEGER .1.3.6.1.4.1.498.19.1.4.1.1.6 |
sc800t3ShelfTypeType of shelf the sc800t3 is located in.ro Enumeration .1.3.6.1.4.1.498.19.1.4.1.1.7 |
sc800t3TwinPackPowerSupplyPower supplies currently installed in Twin Pack. When the sc800t3 is located in
a Spectracomm shelf none(1) will always be returned.ro Enumeration .1.3.6.1.4.1.498.19.1.4.1.1.8 |
sc800t3TestAllLedsThis variable is used to test the front panel leds and individual
segments of the display. A one (1) will turn all leds and display
segments on. They will remain on until a two (2) is set or the card is
rebootedrw Enumeration .1.3.6.1.4.1.498.19.1.4.1.1.9 |
sc800t3NearEndResetStatsSupports the action of soft resetting the sc800t3ValidNearEndIntervals
object. When this object is set to reset(2), then the unit
will reset the sc800t3ValidNearEndIntervals object to zero.
The value of norm(1) can not be set by management.rw Enumeration .1.3.6.1.4.1.498.19.1.4.1.1.10 |
sc800t3FarEndResetStatsSupports the action of soft resetting the sc800t3ValidFarEndIntervals
object. When this object is set to reset(2), then the unit
will reset the sc800t3ValidFarEndIntervals object to zero.
The value of norm(1) can not be set by management.rw Enumeration .1.3.6.1.4.1.498.19.1.4.1.1.11 |
sc800t3NearEndStatLastInitialNumber of seconds from midnight Dec 31 1969 up until sc800t3ValidNearEndIntervals was
last initialized to zero.ro INTEGER .1.3.6.1.4.1.498.19.1.4.1.1.12 |
sc800t3FarEndStatLastInitialNumber of seconds from midnight Dec 31 1969 up until sc800t3ValidFarEndIntervals was
last initialized to zero.ro INTEGER .1.3.6.1.4.1.498.19.1.4.1.1.13 |
sc800t3Alarms OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5 |
sc800t3NoResponse OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.1 |
sc800t3DiagRxErrAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.2 |
sc800t3PowerUpAlm OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.3 |
sc800t3POSTFail OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.4 |
sc800t3UnsolicitedTest OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.5 |
sc800t3ConfigChange OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.6 |
sc800t3TimingLoss OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.7 |
sc800t3LossOfSignal OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.8 |
sc800t3OutOfFrame OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.9 |
sc800t3AIS OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.10 |
sc800t3DTEReadyLoss OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.11 |
sc800t3DTETXCLKLoss OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.12 |
sc800t3RXDNoTrans OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.13 |
sc800t3TXDNoTrans OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.14 |
sc800t3RemoteNotResponding OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.15 |
sc800t3TopPowerSupplyFail OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.16 |
sc800t3BottomPowerSupplyFail OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.17 |
sc800t3DTETest OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.18 |
sc800t3RAI OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.19 |
sc800t3ES OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.20 |
sc800t3SES OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.21 |
sc800t3SAS OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.22 |
sc800t3UAS OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.23 |
sc800t3CodeViolations OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.24 |
sc800t3ESline OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.5.25 |
sc800t3Performance OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.6 |
sc800t3CurrentNearEndTableGives the statistic count for the current
15 minute interval. SEQUENCE OF Sc800t3CurrentNearEndEntry .1.3.6.1.4.1.498.19.1.6.1 |
sc800t3CurrentNearEndEntryAn entry in the sc800t3 CurrentNearEnd table. Sc800t3CurrentNearEndEntry .1.3.6.1.4.1.498.19.1.6.1.1 |
sc800t3CurrentNearEndIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.6.1.1.1 |
sc800t3CurrentNearEndStatReturns a bitwise snapshot of the statistics.
Octet 1 bit 7 - parity
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - 2^9 Errored Seconds (ES)
bit 1 - 2^8
bit 0 - 2^7
Octet 2 bit 7 - parity
bit 6 - 2^6 Errored Seconds (ES)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 3 bit 7 - parity Severely Errored Seconds (SES)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 4 bit 7 - parity Severely Errored Frames (SAS)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 5 bit 7 - parity Unavailable Seconds (UAS)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 6 bit 7 - parity Code Violations (CV)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - n/a
bit 0 - n/a
Octet 7 bit 7 - parity
bit 6 - 2^13 Code Violations (CV)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 8 bit 7 - parity
bit 6 - 2^6 Code Violations (CV)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 9 bit 7 - parity
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - 2^9 Errored Seconds Line (ESl)
bit 1 - 2^8
bit 0 - 2^7
Octet 10 bit 7 - parity
bit 6 - 2^6 Errored Seconds Line (ESl)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 11 bit 7 - parity
bit 6 - 2^6 Percent Complete
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0ro OCTET STRING .1.3.6.1.4.1.498.19.1.6.1.1.2 |
sc800t3PreviousDayNearEndTableGives totals for the previous day of all
the near end statistics. SEQUENCE OF Sc800t3PreviousDayNearEndEntry .1.3.6.1.4.1.498.19.1.6.2 |
sc800t3PreviousDayNearEndEntryAn entry in the sc800t3 PreviousDayNearEndTable. Sc800t3PreviousDayNearEndEntry .1.3.6.1.4.1.498.19.1.6.2.1 |
sc800t3PreviousDayNearEndIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.6.2.1.1 |
sc800t3PreviousDayNearEndStatReturns a bitwise snapshot of the statistics.
Octet 1 bit 7 - parity
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - 2^15 Errored Seconds (ES)
bit 0 - 2^14
Octet 2 bit 7 - parity
bit 6 - 2^13 Errored Seconds (ES)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 3 bit 7 - parity
bit 6 - 2^6 Errored Seconds (ES)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 4 bit 7 - parity Severely Errored Seconds (SES)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 5 bit 7 - parity
bit 6 - 2^6 Severely Errored Seconds (SES)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 6 bit 7 - parity Severely Errored Frame (SAS)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 7 bit 7 - parity
bit 6 - 2^6 Severely Errored Frame (SAS)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 8 bit 7 - parity Unavailable Seconds (UAS)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 9 bit 7 - parity
bit 6 - 2^6 Unavailable Seconds (UAS)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 10 bit 7 - parity Code Violations (CV)
bit 6 - Invalid Data Flag
bit 5 - 2^19
bit 4 - 2^18
bit 3 - 2^17
bit 2 - 2^16
bit 1 - 2^15
bit 0 - 2^14
Octet 11 bit 7 - parity
bit 6 - 2^13 Code Violations (CV)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 12 bit 7 - parity
bit 6 - 2^6 Code Violations (CV)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 13 bit 7 - parity
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - 2^15 Errored Seconds Line (ESl)
bit 0 - 2^14
Octet 14 bit 7 - parity
bit 6 - 2^13 Errored Seconds Line (ESl)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 15 bit 7 - parity
bit 6 - 2^6 Errored Seconds Line (ESl)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 16 bit 7 - parity
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - 2^15 FC-P Path Failure Events
bit 0 - 2^14
Octet 17 bit 7 - parity
bit 6 - 2^13 FC-P Path Failure Events
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 18 bit 7 - parity
bit 6 - 2^6 FC-P Path Failure Events
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0ro OCTET STRING .1.3.6.1.4.1.498.19.1.6.2.1.2 |
sc800t3CurrentFarEndTableGives the statistic count for the current
15 minute interval. SEQUENCE OF Sc800t3CurrentFarEndEntry .1.3.6.1.4.1.498.19.1.6.3 |
sc800t3CurrentFarEndEntryAn entry in the sc800t3 CurrentFarEnd table. Sc800t3CurrentFarEndEntry .1.3.6.1.4.1.498.19.1.6.3.1 |
sc800t3CurrentFarEndIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.6.3.1.1 |
sc800t3CurrentFarEndStatReturns a bitwise snapshot of the statistics.
Octet 1 bit 7 - parity
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - 2^9 Errored Seconds (ES)
bit 1 - 2^8
bit 0 - 2^7
Octet 2 bit 7 - parity
bit 6 - 2^6 Errored Seconds (ES)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 3 bit 7 - parity Severely Errored Seconds (SES)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 4 bit 7 - parity Severely Errored Frames (SAS)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 5 bit 7 - parity Unavailable Seconds (UAS)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 6 bit 7 - parity Code Violations (CV)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - n/a
bit 0 - n/a
Octet 7 bit 7 - parity
bit 6 - 2^13 Code Violations (CV)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 8 bit 7 - parity
bit 6 - 2^6 Code Violations (CV)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 9 bit 7 - parity
bit 6 - 2^6 Percent Complete
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0ro OCTET STRING .1.3.6.1.4.1.498.19.1.6.3.1.2 |
sc800t3CurrentDayNearEndTableGives totals for the current day of all
the near end statistics. SEQUENCE OF Sc800t3CurrentDayNearEndEntry .1.3.6.1.4.1.498.19.1.6.4 |
sc800t3CurrentDayNearEndEntryAn entry in the sc800t3 CurrentDayNearEndTable. Sc800t3CurrentDayNearEndEntry .1.3.6.1.4.1.498.19.1.6.4.1 |
sc800t3CurrentDayNearEndIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.6.4.1.1 |
sc800t3CurrentDayNearEndStatReturns a bitwise snapshot of the statistics.
Octet 1 bit 7 - parity
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - 2^15 Errored Seconds (ES)
bit 0 - 2^14
Octet 2 bit 7 - parity
bit 6 - 2^13 Errored Seconds (ES)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 3 bit 7 - parity
bit 6 - 2^6 Errored Seconds (ES)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 4 bit 7 - parity Severely Errored Seconds (SES)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 5 bit 7 - parity
bit 6 - 2^6 Severely Errored Seconds (SES)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 6 bit 7 - parity Severely Errored Frame (SAS)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 7 bit 7 - parity
bit 6 - 2^6 Severely Errored Frame (SAS)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 8 bit 7 - parity Unavailable Seconds (UAS)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 9 bit 7 - parity
bit 6 - 2^6 Unavailable Seconds (UAS)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 10 bit 7 - parity Code Violations (CV)
bit 6 - Invalid Data Flag
bit 5 - 2^19
bit 4 - 2^18
bit 3 - 2^17
bit 2 - 2^16
bit 1 - 2^15
bit 0 - 2^14
Octet 11 bit 7 - parity
bit 6 - 2^13 Code Violations (CV)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 12 bit 7 - parity
bit 6 - 2^6 Code Violations (CV)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 13 bit 7 - parity
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - 2^15 Errored Seconds Line (ESl)
bit 0 - 2^14
Octet 14 bit 7 - parity
bit 6 - 2^13 Errored Seconds Line (ESl)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 15 bit 7 - parity
bit 6 - 2^6 Errored Seconds Line (ESl)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 16 bit 7 - parity
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - 2^15 FC-P Path Failure Events
bit 0 - 2^14
Octet 17 bit 7 - parity
bit 6 - 2^13 FC-P Path Failure Events
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 18 bit 7 - parity
bit 6 - 2^6 FC-P Path Failure Events
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0ro OCTET STRING .1.3.6.1.4.1.498.19.1.6.4.1.2 |
sc800t3PreviousDayFarEndTableGives totals for the previous day of
all the Far End statistics. SEQUENCE OF Sc800t3PreviousDayFarEndEntry .1.3.6.1.4.1.498.19.1.6.5 |
sc800t3PreviousDayFarEndEntryAn entry in the sc800t3PreviousDayFarEndTable. Sc800t3PreviousDayFarEndEntry .1.3.6.1.4.1.498.19.1.6.5.1 |
sc800t3PreviousDayFarEndIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.6.5.1.1 |
sc800t3PreviousDayFarEndStatReturns a bitwise snapshot of the statistics.
Octet 1 bit 7 - parity
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - 2^15 Errored Seconds (ES)
bit 0 - 2^14
Octet 2 bit 7 - parity
bit 6 - 2^13 Errored Seconds (ES)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 3 bit 7 - parity
bit 6 - 2^6 Errored Seconds (ES)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 4 bit 7 - parity Severely Errored Seconds (SES)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 5 bit 7 - parity
bit 6 - 2^6 Severely Errored Seconds (SES)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 6 bit 7 - parity Severely Errored Frame (SAS)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 7 bit 7 - parity
bit 6 - 2^6 Severely Errored Frame (SAS)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 8 bit 7 - parity Unavailable Seconds (UAS)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 9 bit 7 - parity
bit 6 - 2^6 Unavailable Seconds (UAS)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 10 bit 7 - parity Code Violations (CV)
bit 6 - Invalid Data Flag
bit 5 - 2^19
bit 4 - 2^18
bit 3 - 2^17
bit 2 - 2^16
bit 1 - 2^15
bit 0 - 2^14
Octet 11 bit 7 - parity
bit 6 - 2^13 Code Violations (CV)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 12 bit 7 - parity
bit 6 - 2^6 Code Violations (CV)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 13 bit 7 - parity FCCP-PFE Path Failure Events
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - 2^15
bit 0 - 2^14
Octet 14 bit 7 - parity
bit 6 - 2^13 FCCP-PFE Path Failure Events
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 15 bit 7 - parity
bit 6 - 2^6 FCCP-PFE Path Failure Events
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0ro OCTET STRING .1.3.6.1.4.1.498.19.1.6.5.1.2 |
sc800t3CurrentDayFarEndTableGives totals for the current day of
all the Far End statistics. SEQUENCE OF Sc800t3CurrentDayFarEndEntry .1.3.6.1.4.1.498.19.1.6.6 |
sc800t3CurrentDayFarEndEntryAn entry in the sc800t3CurrentDayFarEndTable. Sc800t3CurrentDayFarEndEntry .1.3.6.1.4.1.498.19.1.6.6.1 |
sc800t3CurrentDayFarEndIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.6.6.1.1 |
sc800t3CurrentDayFarEndStatReturns a bitwise snapshot of the statistics.
Octet 1 bit 7 - parity
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - 2^15 Errored Seconds (ES)
bit 0 - 2^14
Octet 2 bit 7 - parity
bit 6 - 2^13 Errored Seconds (ES)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 3 bit 7 - parity
bit 6 - 2^6 Errored Seconds (ES)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 4 bit 7 - parity Severely Errored Seconds (SES)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 5 bit 7 - parity
bit 6 - 2^6 Severely Errored Seconds (SES)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 6 bit 7 - parity Severely Errored Frame (SAS)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 7 bit 7 - parity
bit 6 - 2^6 Severely Errored Frame (SAS)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 8 bit 7 - parity Unavailable Seconds (UAS)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 9 bit 7 - parity
bit 6 - 2^6 Unavailable Seconds (UAS)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 10 bit 7 - parity Code Violations (CV)
bit 6 - Invalid Data Flag
bit 5 - 2^19
bit 4 - 2^18
bit 3 - 2^17
bit 2 - 2^16
bit 1 - 2^15
bit 0 - 2^14
Octet 11 bit 7 - parity
bit 6 - 2^13 Code Violations (CV)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 12 bit 7 - parity
bit 6 - 2^6 Code Violations (CV)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 13 bit 7 - parity FCCP-PFE Path Failure Events
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - 2^15
bit 0 - 2^14
Octet 14 bit 7 - parity
bit 6 - 2^13 FCCP-PFE Path Failure Events
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 15 bit 7 - parity
bit 6 - 2^6 FCCP-PFE Path Failure Events
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0ro OCTET STRING .1.3.6.1.4.1.498.19.1.6.6.1.2 |
sc800t3NearEndIntervalTableThe sc800t3 Near End Interval table. SEQUENCE OF Sc800t3NearEndIntervalEntry .1.3.6.1.4.1.498.19.1.6.7 |
sc800t3NearEndIntervalEntryAn entry in the Interval table. Sc800t3NearEndIntervalEntry .1.3.6.1.4.1.498.19.1.6.7.1 |
sc800t3NearEndIntervalIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.6.7.1.1 |
sc800t3NearEndIntervalNumberA number between 1 and 31, where 1 is the most recently completed
minute interval and 31 is the least recently completed 15 minutes
interval (assuming that all 31 intervals are valid).ro INTEGER .1.3.6.1.4.1.498.19.1.6.7.1.2 |
sc800t3NearEndIntervalStatsReturns a bitwise snapshot of the statistics.
Octet 1 bit 7 - parity
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - 2^9 Errored Seconds (ES)
bit 1 - 2^8
bit 0 - 2^7
Octet 2 bit 7 - parity
bit 6 - 2^6 Errored Seconds (ES)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 3 bit 7 - parity Severely Errored Seconds (SES)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 4 bit 7 - parity Severely Errored Frames (SAS)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 5 bit 7 - parity Unavailable Seconds (UAS)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 6 bit 7 - parity Code Violations (CV)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - n/a
bit 0 - n/a
Octet 7 bit 7 - parity
bit 6 - 2^13 Code Violations (CV)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 8 bit 7 - parity
bit 6 - 2^6 Code Violations (CV)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 9 bit 7 - parity
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - 2^9 Errored Seconds Line (ESl)
bit 1 - 2^8
bit 0 - 2^7
Octet 10 bit 7 - parity
bit 6 - 2^6 Errored Seconds Line (ESl)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 11 bit 7 - parity
bit 6 - n/a Interval (1-31)
bit 5 - n/a
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0ro OCTET STRING .1.3.6.1.4.1.498.19.1.6.7.1.3 |
sc800t3FarEndIntervalTableThe sc800t3 Far End Interval table. SEQUENCE OF Sc800t3FarEndIntervalEntry .1.3.6.1.4.1.498.19.1.6.9 |
sc800t3FarEndIntervalEntryAn entry in the Interval table. Sc800t3FarEndIntervalEntry .1.3.6.1.4.1.498.19.1.6.9.1 |
sc800t3FarEndIntervalIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.6.9.1.1 |
sc800t3FarEndIntervalNumberA number between 1 and 31, where 1 is the most recently completed
minute interval and 31 is the least recently completed 15 minutes
interval (assuming that all 31 intervals are valid).ro INTEGER .1.3.6.1.4.1.498.19.1.6.9.1.2 |
sc800t3FarEndIntervalStatsReturns a bitwise snapshot of the statistics.
Octet 1 bit 7 - parity
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - 2^9 Errored Seconds (ES)
bit 1 - 2^8
bit 0 - 2^7
Octet 2 bit 7 - parity
bit 6 - 2^6 Errored Seconds (ES)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 3 bit 7 - parity Severely Errored Seconds (SES)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 4 bit 7 - parity Severely Errored Frames (SAS)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 5 bit 7 - parity Unavailable Seconds (UAS)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 6 bit 7 - parity Code Violations (CV)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - n/a
bit 0 - n/a
Octet 7 bit 7 - parity
bit 6 - 2^13 Code Violations (CV)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 8 bit 7 - parity
bit 6 - 2^6 Code Violations (CV)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 9 bit 7 - parity
bit 6 - n/a Interval (1-31)
bit 5 - n/a
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0ro OCTET STRING .1.3.6.1.4.1.498.19.1.6.9.1.3 |
sc800t3PreviousNearEndTableGives the statistic count for the previous
15 minute interval. SEQUENCE OF Sc800t3PreviousNearEndEntry .1.3.6.1.4.1.498.19.1.6.10 |
sc800t3PreviousNearEndEntryAn entry in the sc800t3 PreviousNearEnd table. Sc800t3PreviousNearEndEntry .1.3.6.1.4.1.498.19.1.6.10.1 |
sc800t3PreviousNearEndIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.6.10.1.1 |
sc800t3PreviousNearEndStatReturns a bitwise snapshot of the statistics.
Octet 1 bit 7 - f/u
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - 2^9 Errored Seconds (ES)
bit 1 - 2^8
bit 0 - 2^7
Octet 2 bit 7 - f/u
bit 6 - 2^6 Errored Seconds (ES)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 3 bit 7 - f/u Severely Errored Seconds (SES)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 4 bit 7 - f/u Severely Errored Frames (SAS)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 5 bit 7 - f/u Unavailable Seconds (UAS)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 6 bit 7 - f/u Code Violations (CV)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - n/a
bit 0 - n/a
Octet 7 bit 7 - f/u
bit 6 - 2^13 Code Violations (CV)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 8 bit 7 - f/u
bit 6 - 2^6 Code Violations (CV)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 9 bit 7 - fu
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - 2^9 Errored Seconds Line (ESl)
bit 1 - 2^8
bit 0 - 2^7
Octet 10 bit 7 - f/u
bit 6 - 2^6 Errored Seconds Line (ESl)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 11 bit 7 - f/u
bit 6 - 2^6 Percent Complete
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0ro OCTET STRING .1.3.6.1.4.1.498.19.1.6.10.1.2 |
sc800t3PreviousFarEndTableGives the statistic count for the previous
15 minute interval. SEQUENCE OF Sc800t3PreviousFarEndEntry .1.3.6.1.4.1.498.19.1.6.11 |
sc800t3PreviousFarEndEntryAn entry in the sc800t3 PreviousFarEnd table. Sc800t3PreviousFarEndEntry .1.3.6.1.4.1.498.19.1.6.11.1 |
sc800t3PreviousFarEndIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.6.11.1.1 |
sc800t3PreviousFarEndStatReturns a bitwise snapshot of the statistics.
Octet 1 bit 7 - f/u
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - 2^9 Errored Seconds (ES)
bit 1 - 2^8
bit 0 - 2^7
Octet 2 bit 7 - f/u
bit 6 - 2^6 Errored Seconds (ES)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 3 bit 7 - f/u Severely Errored Seconds (SES)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 4 bit 7 - f/u Severely Errored Frames (SAS)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 5 bit 7 - f/u Unavailable Seconds (UAS)
bit 6 - Invalid Data Flag
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0
Octet 6 bit 7 - f/u Code Violations (CV)
bit 6 - Invalid Data Flag
bit 5 - n/a
bit 4 - n/a
bit 3 - n/a
bit 2 - n/a
bit 1 - n/a
bit 0 - n/a
Octet 7 bit 7 - f/u
bit 6 - 2^13 Code Violations (CV)
bit 5 - 2^12
bit 4 - 2^11
bit 3 - 2^10
bit 2 - 2^9
bit 1 - 2^8
bit 0 - 2^7
Octet 8 bit 7 - f/u
bit 6 - 2^6 Code Violations (CV)
bit 5 - 2^5
bit 4 - 2^4
bit 3 - 2^3
bit 2 - 2^2
bit 1 - 2^1
bit 0 - 2^0ro OCTET STRING .1.3.6.1.4.1.498.19.1.6.11.1.2 |
sc800t3AlarmConfig OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.7 |
sc800t3AlarmConfigTableThe sc800t3AlarmConfigTable contains entries that configure alarm
reporting. The structure of the table is such that alarm
configuration is supported on a unit and interface basis, and
then on an alarm type basis within the interface. For
simplicity sake alarms, be they unit or interface
related, are represented in one table. SEQUENCE OF Sc800t3AlarmConfigEntry .1.3.6.1.4.1.498.19.1.7.1 |
sc800t3AlarmConfigEntryAn entry in the GDC Alarm Configuration table. Sc800t3AlarmConfigEntry .1.3.6.1.4.1.498.19.1.7.1.1 |
sc800t3AlarmConfigIndexInteger value which uniquely identifies the SC800T3 to which this
entry is applicable. SCinstance is defined to be SLDi where:
S (byte value) - physical shelf slot location (01-32)
L (byte value) - line number (01)
D (byte value) - drop number (00)
i (byte value) - interface number (00)ro SCinstance .1.3.6.1.4.1.498.19.1.7.1.1.1 |
sc800t3AlarmConfigIdentifierformat: iso.org.dod.internet.private.enterprises.gdc.
ds3.sc800t3.sc800t3Alarms.ALM
example: 1.3.6.1.4.1.498.19.1.5.ALM
where ALM = 1 for sc800t3NoResponse alarm, 2 for sc800t3DiagRxErr alarm,
etc., as specified in the Alarm Definitions above.ro OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.7.1.1.2 |
sc800t3AlarmCountWindowThis variable sets/reads the alarm window.
This window is used with the alarm threshold to determine
how long the alarm should be active before reporting.rw Enumeration .1.3.6.1.4.1.498.19.1.7.1.1.3 |
sc800t3AlarmCountThresholdThis function sets/reads the alarm threshold criteria.
This threshold is used along with the the alarm window to
determine the number of instances in a given time frame for
an alarm to occur before the alarm is considered active.rw Enumeration .1.3.6.1.4.1.498.19.1.7.1.1.4 |
sc800t3LocalAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.498.19.1.8 |
sc800t3LocalAlarmConfigTableThe sc800t3LocalAlarmConfigTable contains entries that configure
alarm
reporting. The structure of the table is such that alarm
configuration is supported on a unit and interface basis, and
then on an alarm type basis within the interface. For
simplicity sake alarms, be they unit or interface
related, are represented in one table. SEQUENCE OF Sc800t3LocalAlarmConfigEntry .1.3.6.1.4.1.498.19.1.8.1 |
sc800t3LocalAlarmConfigEntryAn entry in the GDC Local Alarm Configuration table. Sc800t3LocalAlarmConfigEntry .1.3.6.1.4.1.498.19.1.8.1.1 |
sc800t3LocalAlarmConfigIndexThe index value which uniquely identifies the interface to
which this entry is applicable.ro SCinstance .1.3.6.1.4.1.498.19.1.8.1.1.1 |
sc800t3OOFDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.2 |
sc800t3AISLOCALDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.3 |
sc800t3TIMLOSDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.4 |
sc800t3TXDLOSDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.5 |
sc800t3RXDLOSDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.6 |
sc800t3LOSDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.7 |
sc800t3TPSFAILDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.8 |
sc800t3BPSFAILDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.9 |
sc800t3DTECLKLOSDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.10 |
sc800t3DTERDYLOSDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.11 |
sc800t3RAILOCALDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.12 |
sc800t3THRESHESLDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.13 |
sc800t3THRESHESDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.14 |
sc800t3THRESHSESDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.15 |
sc800t3THRESHSASDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.16 |
sc800t3THRESHUASDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.17 |
sc800t3THRESHCVDisables or enables the alarm on the Major buss or Minor
buss.rw Enumeration .1.3.6.1.4.1.498.19.1.8.1.1.18 |