INNOVX-CORE-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
50
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
50 total| Object Name |
|---|
gdc OBJECT IDENTIFIER .1.3.6.1.4.1.498 |
RFC1155-SMI Unknown .1.3.6.1.4.1.498 |
framerelay OBJECT IDENTIFIER .1.3.6.1.4.1.498.22 |
innovx OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1 |
innovxAlarmTrapTrap used to report all alarm conditions on the Innovx products. Some
trap arguments may not apply for specific conditions reported, see above.
Imported arguments: sysName - from rfc1213.mib, and pvcIdentifier - from
FPProbe.mib, a comment field for DLCI description, pvcIdentifier will be
NULL (size 0) if not applicable to the trap condition being reported. TRAP-TYPE .1.3.6.1.4.1.498.22.1.0.1 |
coreGroup OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.1 |
coreAdmin OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.1.1 |
innovxMIBversionIdentifies the version of the MIB as `X.YZT' where:
X: Major Revision (1-9)
Y: Minor Revision (0-9)
Z: Typographical Revision (0-9)
T: Test Revision (A-Z)
Upon formal release, the test revision will not be present.ro DisplayString .1.3.6.1.4.1.498.22.1.1.1.1 |
innovxFirmwareVersionIdentifies the version of the firmware as `MM.NN.BB' where:
MM: Major Revision (0-99)
NN: Minor Revision (0-99)
BB: Bug Fix Revision (0-99)ro DisplayString .1.3.6.1.4.1.498.22.1.1.1.2 |
innovxSerialNumberIdentifies the serial number of the unit.ro DisplayString .1.3.6.1.4.1.498.22.1.1.1.3 |
innovxHardwareVersionIdentifies the version of the base card hardware. The released
version number is sequenced as follows:
::= { coreAdmin 4 }
innovxHardwareDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (255))
ACCESS read-only
STATUS mandatory
DESCRIPTIONro DisplayString .1.3.6.1.4.1.498.22.1.1.1.6 |
innovxHardwareOptionsIdentifies the hardware options installed on this innovx product.
where 0 = not installed and 1 = installed, as follows:
LED description
Octet 1 bit 7 - n/u
bit 6 - n/u
bit 5 - n/u
bit 4 - n/u
bit 3 - n/u
bit 2 - n/u
bit 1 - n/u
bit 0 - n/u
Octet 2 bit 7 - n/u
bit 6 - n/u
bit 5 - n/u
bit 4 - n/u
bit 3 - n/u
bit 2 - n/u
bit 1 - n/u
bit 0 - Cascade Adapterro OCTET STRING .1.3.6.1.4.1.498.22.1.1.1.7 |
cmnTrapAddrTableA table of management systems ready to accept traps
generated by this node.
To add an entry to the table, a set on the Community
name for the instance (IP Address and UDP PORT) needs
to be performed. To delete an entry, a set on the
Status to invalid on the instance needs to be
performed. SEQUENCE OF CmnTrapAddrEntry .1.3.6.1.4.1.498.22.1.1.1.8 |
cmnTrapAddrEntryInformation needed to deliver traps to a particular
management station. This table holds a maximum of 4
entries. CmnTrapAddrEntry .1.3.6.1.4.1.498.22.1.1.1.8.1 |
cmnTrapAddrIpDestThe IP address of the management agent receiving
traps.
The IP address of 0.0.0.0 will not be allowed.ro IpAddress .1.3.6.1.4.1.498.22.1.1.1.8.1.1 |
cmnTrapAddrCommunityThe community name expected by the management station
receiving traps.rw DisplayString .1.3.6.1.4.1.498.22.1.1.1.8.1.2 |
cmnTrapAddrStatusThe status of the entry. If read and the entry
exists, valid(1) will always be returned.
Invalid entries will be removed from the table.rw Enumeration .1.3.6.1.4.1.498.22.1.1.1.8.1.3 |
coreReset OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.1.2 |
innovxSoftResetA set of `reset' on this object instructs the unit to perform a
soft reset.rw Enumeration .1.3.6.1.4.1.498.22.1.1.2.1 |
innovxStatsResetA set of `reset' on this object instructs the unit to set all statistics
tracking objects to zero, including: current interval values, 24 hour
total values, number of valid historical interval objects values, and all
historical interval objects values (#1 - #96).rw Enumeration .1.3.6.1.4.1.498.22.1.1.2.2 |
coreDiags OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.1.3 |
innovxSelfTestA set of `start-test' on this object instructs the unit to perform a
self test.rw Enumeration .1.3.6.1.4.1.498.22.1.1.3.1 |
innovxSelfTestStatusDescribes the result of a unit self test, during normal operation and
after an innovxSoftReset or an innovxDefaultReset this object will read
`normal-complete-pass'.ro Enumeration .1.3.6.1.4.1.498.22.1.1.3.2 |
coreStatus OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.1.4 |
innovxLedStatusA bitwise snapshot of the front panel LED states,
where 0 = LED off and 1 = LED on, as follows:
LED description
Octet 1 bit 7 - n/u
bit 6 - n/u
bit 5 - n/u
bit 4 - LAN LAN activity
bit 3 - ALM Alarm Condition - any
bit 2 - CN Congestion (FECNS & BECNS)
bit 1 - TST Test Mode
bit 0 - ERR Framing Errorsro OCTET STRING .1.3.6.1.4.1.498.22.1.1.4.1 |
innovxPortStatusA bitwise snapshot of interface port status conditions and EIA signals,
where 0 = condition not present, and 1 = condition present, as follows:
Octet 1 - ETHERNET Interface Port Status
bit 7 - n/u
bit 6 - n/u
bit 5 - n/u
bit 4 - Transmit Activity
bit 3 - Receive Activity
bit 2 - Runt packet (<64k bytes)
bit 1 - CRC Error
bit 0 - Transmit Collisions
Octet 2 - PPP/CONSOLE Interface Port Status
bit 7 - interface mode: 0 = PPP, 1 = Console,
(invalid if 'handshake in progress')
bit 6 - handshake in progress = 1/handshake complete = 0
bit 5 - n/u
bit 4 - n/u
bit 3 - n/u
bit 2 - DTR Loss
bit 1 - Transmit Activity
bit 0 - Receive Activityro OCTET STRING .1.3.6.1.4.1.498.22.1.1.4.2 |
innovxPortFrameCountsThe total number of frames transmitted and received on each interface
port. This object will be reset to zero after a read, and after power up,
soft reset, or factory defaults reset.
Octet 1 - ETHERNET Interface Transmit Frame Count Octet 2
bit 7 - 2^15 bit 7 - 2^7
bit 6 - 2^14 bit 6 - 2^6
bit 5 - 2^13 bit 5 - 2^5
bit 4 - 2^12 bit 4 - 2^4
bit 3 - 2^11 bit 3 - 2^3
bit 2 - 2^10 bit 2 - 2^2
bit 1 - 2^9 bit 1 - 2^1
bit 0 - 2^8 bit 0 - 2^0
Octet 3 - ETHERNET Interface Receive Frame Count Octet 4
bit 7 - 2^15 bit 7 - 2^7
bit 6 - 2^14 bit 6 - 2^6
bit 5 - 2^13 bit 5 - 2^5
bit 4 - 2^12 bit 4 - 2^4
bit 3 - 2^11 bit 3 - 2^3
bit 2 - 2^10 bit 2 - 2^2
bit 1 - 2^9 bit 1 - 2^1
bit 0 - 2^8 bit 0 - 2^0
Octet 5 - PPP/CONSOLE Intrf Tx Data Byte Count Octet 6
bit 7 - 2^15 bit 7 - 2^7
bit 6 - 2^14 bit 6 - 2^6
bit 5 - 2^13 bit 5 - 2^5
bit 4 - 2^12 bit 4 - 2^4
bit 3 - 2^11 bit 3 - 2^3
bit 2 - 2^10 bit 2 - 2^2
bit 1 - 2^9 bit 1 - 2^1
bit 0 - 2^8 bit 0 - 2^0
Octet 7 - PPP/CONSOLE Intrf Rx Data Byte Count Octet 8
bit 7 - 2^15 bit 7 - 2^7
bit 6 - 2^14 bit 6 - 2^6
bit 5 - 2^13 bit 5 - 2^5
bit 4 - 2^12 bit 4 - 2^4
bit 3 - 2^11 bit 3 - 2^3
bit 2 - 2^10 bit 2 - 2^2
bit 1 - 2^9 bit 1 - 2^1
bit 0 - 2^8 bit 0 - 2^0ro OCTET STRING .1.3.6.1.4.1.498.22.1.1.4.3 |
coreTrapArgs OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.1.5 |
innovxTrapSeverityTrap argument describing severity of the trap being reported. Enumeration .1.3.6.1.4.1.498.22.1.1.5.1 |
innovxTrapStateTrap argument describing the state of the specific condition
reported as: active, clear or exceeded. DisplayString .1.3.6.1.4.1.498.22.1.1.5.2 |
innovxTrapDescriptionTrap argument describing the trap being reported. DisplayString .1.3.6.1.4.1.498.22.1.1.5.3 |
innovxTrapThresholdTrap argument describing the threshold value which was met in reporting
the trap condition. This argument will be NULL (size 0) if not applicable
to the trap condition being reported. DisplayString .1.3.6.1.4.1.498.22.1.1.5.4 |
innovxTrapActualValueTrap argument identifying the current event value of this trap. This
argument will be NULL (size 0) if not applicable to the trap condition
being reported. DisplayString .1.3.6.1.4.1.498.22.1.1.5.5 |
innovxTrapDlciTrap argument identifying the DLCI number of the specific condition
reported. This argument will be set to 0 if not applicable to the
trap condition being reported. INTEGER ( 16..991 ) .1.3.6.1.4.1.498.22.1.1.5.6 |
innovxpvcIdentifierComment field for PVC description, backfilled from the FRProbe mib. DisplayString .1.3.6.1.4.1.498.22.1.1.5.7 |
coreAggRate OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.1.6 |
ap553DS0FormatDefines the DS0 base rate as either 56K or 64K bits per second.
This object value, in conjunction with the ap553NumDS0s object
value determines the LIU aggregate bandwidth.
`nx64k' defines a DS0 data format as clear channel in which all 8 bits
of the DS0 are used for data.
`nx56k defines a DS0 data format as 7 bits for data, and 1 bit used for
signalling information or unused and forced to marks.
The DSU will enforce an 8x(N+1) minimum ones density requirement when
ap553NetLineCoding == `ami' and ap553DS0Format == `nx64k' and
ap553DS0AllocationScheme == `consecutive'.ro Enumeration .1.3.6.1.4.1.498.22.1.1.6.1 |
ap553NumberOfDS0sDefines the number of DS0 cells used for passing DSU data.
When ap553DS0AllocationScheme is consecutive, valid values are 1 - N
where N <= (25 - ap553StartingDS0).
When ap553DS0AllocationScheme is alternate, valid values are 1 - N
where N <= (25 - ap553StartingDS0)/2.ro INTEGER .1.3.6.1.4.1.498.22.1.1.6.2 |
coreFeatures OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.1.7 |
innovxFeatureTableA table of keyable software features contained in this
this product.
This table holds information about the software
features that are available and can be Key enabled
on this product. It also holds the status (On/Off)
of the enabled features. SEQUENCE OF InnovxFeatureEntry .1.3.6.1.4.1.498.22.1.1.7.1 |
innovxFeatureEntrySoftware Features that have been Key enabled
in this product. This table holds a maximum of 16
entries. InnovxFeatureEntry .1.3.6.1.4.1.498.22.1.1.7.1.1 |
innovxFeatureIndexIdentifies an entry (row) in the feature table,
1-16 features.ro INTEGER ( 1..16 ) .1.3.6.1.4.1.498.22.1.1.7.1.1.1 |
innovxFeatureNameThe Name of the feature that is available in
this software.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.498.22.1.1.7.1.1.2 |
innovxFeatureEnableThe state of the feature, whether it has been Key
enabled or not.
WEBFLAG
Disabled
Enabled
WEBENDro Enumeration .1.3.6.1.4.1.498.22.1.1.7.1.1.3 |
innovxFeatureStatusThe operational status of the feature, on
off
WEBFLAG
Off
On
WEBENDro Enumeration .1.3.6.1.4.1.498.22.1.1.7.1.1.4 |
linkProbe OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.2 |
liuGroup OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.3 |
casGroup OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.4 |
ddsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.5 |
dteGroup OBJECT IDENTIFIER .1.3.6.1.4.1.498.22.1.6 |