ALPHA-NOTIFICATION-MIB
The ALPHA-NOTIFICATION-MIB defines the standardized trap and inform message structures for system controllers, enabling the transmission of critical operational events and fault conditions to an SNMP management station. This module facilitates real-time alerting on device status changes, hardware failures, or configuration anomalies without requiring active polling.
Imported Objects
Objects
10 total| Object Name |
|---|
alphaAlarmNotificationsThis MIB defines the notification block(s) available in system controllers. MODULE-IDENTITY .1.3.6.1.4.1.7309.100 |
alphaAlarmActiveStateSNMPv2 notification varbinds start with SysUptime
and Notification Oid as the first two in the list
by default. The first varbind in this definition
would be the third varbind in the raw output of the
notification.
An instance of the alarm indicated by
alarmActiveModelPointer has been raised
against the entity indicated by
alarmActiveResourceId.
The state of the alarm is indicated by the
alarmModelState.
The description of the alarm along with its source
is indicated by the alarmModelDescription and
componentListStaticName respectively.
componentListSnmpId provides the Id set to the
source of the alarm.
The agent must throttle the generation of
consecutive alarmActiveState traps so that there is at
least a two-second gap between traps of this
type against the same alarmActiveModelPointer and
alarmActiveResourceId. When traps are throttled,
they are queued for sending at a future time.
A management application should periodically check
the value of alarmActiveLastChanged to detect any
missed alarmActiveState notification-events, e.g.,
due to throttling or transmission loss. NOTIFICATION-TYPE .1.3.6.1.4.1.7309.100.1 |
alphaAlarmClearStateSNMPv2 notification varbinds start with SysUptime
and Notification Oid as the first two in the list
by default. The first varbind in this definition
would be the third varbind in the raw output of the
notification.
An instance of the alarm indicated by
alarmActiveModelPointer has been cleared against
the entity indicated by alarmActiveResourceId.
The state of the alarm is indicated by the
alarmModelState.
The description of the alarm along with its source
is indicated by the alarmModelDescription and
componentListStaticName respectively.
componentListSnmpId provides the Id set to the
source of the alarm.
The agent must throttle the generation of
consecutive alarmActiveClear traps so that there is at
least a two-second gap between traps of this
type against the same alarmActiveModelPointer and
alarmActiveResourceId. When traps are throttled,
they are queued for sending at a future time.
A management application should periodically check
the value of alarmActiveLastChanged to detect any
missed alarmClearState notification-events, e.g.,
due to throttling or transmission loss. NOTIFICATION-TYPE .1.3.6.1.4.1.7309.100.2 |
alphaAlarmNotificationConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7309.100.102 |
alphaAlarmNotificationCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.7309.100.102.1 |
alphaAlarmNotificationGroups OBJECT IDENTIFIER .1.3.6.1.4.1.7309.100.102.1.2 |
alphaAlarmNotificationsExtension OBJECT IDENTIFIER .1.3.6.1.4.1.7309.101 |
alarmSeverityUser defined value used for filtering purposes.ro Integer32 .1.3.6.1.4.1.7309.101.1 |
alarmCustomDescriptionUser defined value used for filtering purposes.ro OCTET STRING .1.3.6.1.4.1.7309.101.2 |
alarmPriorityUser defined value used for filtering purposes.ro OCTET STRING .1.3.6.1.4.1.7309.101.3 |
More MIBs from Alpha
Browse all AlphaMIBs →The SITE-MONITORING-MIB structures SNMP OIDs to categorize and organize management data for Alpha Innovations hardware based on specific design center architectures. This module facilitates the monitoring of site-specific operational metrics and device states within the vendor's proprietary network infrastructure.
AlphaPowerSystem-MIB facilitates SNMP monitoring of DC power system devices within Cordex series controllers, specifically exposing the `dcPwrSysDevice` information block for tracking power subsystem status and operational parameters.
The Argus-MIB facilitates SNMP monitoring of SM-series system controllers, specifically exposing the `dcPwrSysDevice` information block to track DC power system status and device health metrics.
SNMP MIB module
The ALPHA-RESOURCE-MIB provides standardized SNMP access to hardware resource utilization metrics, such as CPU load, memory consumption, and storage capacity, within system controllers. This module enables network management systems to monitor critical performance thresholds and capacity planning data for ALPHA vendor infrastructure.
The Argus-Power-System-MIB facilitates SNMP monitoring of CXC-series RMU controllers, specifically exposing the `upsDevice` information block to track Uninterruptible Power Supply (UPS) status, battery conditions, and power system health metrics.