ADTRAN-DS1-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ADTRAN-DS1-MIB.
42
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
42 total| Object Name |
|---|
adtran OBJECT IDENTIFIER .1.3.6.1.4.1.664 |
RFC1155-SMI Unknown .1.3.6.1.4.1.664 |
adMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.664.2 |
adDS1mg OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.3 |
adDS1AlarmTableThe DS1 Alarm Event Table. SEQUENCE OF AdDS1AlarmEntry .1.3.6.1.4.1.664.2.3.1 |
adDS1AlarmEntryAn entry in the DS1 Alarm Event Table. AdDS1AlarmEntry .1.3.6.1.4.1.664.2.3.1.1 |
adDS1AlarmIndexThe index value which uniquely identifies the DS1
interface. The interface identified by a particular
value of this index is the same interface as identified
by dsx1LineIndex in DS1 MIB.ro INTEGER(1..'7fffffff'h) .1.3.6.1.4.1.664.2.3.1.1.1 |
adDS1AlarmEnableEnables or disables the generation of DS1 Alarm Traps
for Line Status event changes.rw Enumeration .1.3.6.1.4.1.664.2.3.1.1.2 |
adDS1LineEventThis bit map variable indicates state changes in the
DS1 line status variable (dsx1LineStatus). When a line
status bit changes state, the corresponding line event
bit is set in this variable. If armed, setting the event
will generate an Alarm Trap. After reporting the events
in an Alarm Trap or Get response, the device clears
the reported events.
The various alarm event bit positions are:
1 No Alarm Present
2 Far end LOF ( a.k.a., Yellow Alarm )
4 Near end sending LOF Indication
8 Far end sending AIS ( Blue Alarm )
16 Near end sending AIS
32 Near end LOF ( a.k.a., Red Alarm )
64 Near end Loss Of Signal
128 Near end is looped
256 E1 TS16 AIS
512 Far End Sending TS16 LOMF
1024 Near End Sending TS16 LOMF
2048 Near End detects a test code
4096 any line status not defined herero INTEGER .1.3.6.1.4.1.664.2.3.1.1.3 |
adDS1LineArmThis bit map variable arms or disarms an individual or
group of events identified in adDS1LineEvent as a source
for generation of DS1 Alarm Trap.
The various arm event bit positions are:
1 No Alarm Present
2 Far end LOF ( a.k.a., Yellow Alarm )
4 Near end sending LOF Indication
8 Far end sending AIS ( Blue Alarm )
16 Near end sending AIS
32 Near end LOF ( a.k.a., Red Alarm )
64 Near end Loss Of Signal
128 Near end is looped
256 E1 TS16 AIS
512 Far End Sending TS16 LOMF
1024 Near End Sending TS16 LOMF
2048 Near End detects a test code
4096 any line status not defined hererw INTEGER .1.3.6.1.4.1.664.2.3.1.1.4 |
adDS1AlertTableThe DS1 Alert Event Table. SEQUENCE OF AdDS1AlertEntry .1.3.6.1.4.1.664.2.3.2 |
adDS1AlertEntryAn entry in the DS1 Alert Event Table. AdDS1AlertEntry .1.3.6.1.4.1.664.2.3.2.1 |
adDS1AlertIndexThe index value which uniquely identifies the DS1
interface. The interface identified by a particular
value of this index is the same interface as identified
by dsx1LineIndex in DS1 MIB.ro INTEGER(1..'7fffffff'h) .1.3.6.1.4.1.664.2.3.2.1.1 |
adDS1AlertEnableEnables or disables the generation of DS1 Alert Traps
for Performance Monitor Threshold Crossing Alerts.rw Enumeration .1.3.6.1.4.1.664.2.3.2.1.2 |
adDS1CurrentAlertThis DS1 performance status variable indicates Threshold
Crossing Alerts for Near End Current 15 minute interval.
An alert bit is set in this variable when the value of
the dsx1CurrentTable object exceeds the Threshold Value.
This variable contains the sum of alert values.
Threshold Crossing Alert bit position values:
1 ES - Errored Seconds
2 SES - Severely Errored Seconds
4 SEFS - Severely Errored Framing Seconds
8 UAS - Unavailable Seconds
16 CSS - Controlled Slip Seconds
32 PCV - Path Coding Violations
64 LES - Line Errored Seconds
128 BES - Bursty Errored Seconds
256 DM - Degraded Minutes
512 LCV - Line Code Violationsro INTEGER .1.3.6.1.4.1.664.2.3.2.1.3 |
adDS1TotalAlertThis DS1 performance status variable indicates Threshold
Crossing Alerts for Near End Total performance variables.
An alert bit is set in this variable when the value of
the dsx1TotalTable object exceeds the Threshold Value.
This variable contains the sum of alert values.
Threshold Crossing Alert bit position values:
1 ES - Errored Seconds
2 SES - Severely Errored Seconds
4 SEFS - Severely Errored Framing Seconds
8 UAS - Unavailable Seconds
16 CSS - Controlled Slip Seconds
32 PCV - Path Coding Violations
64 LES - Line Errored Seconds
128 BES - Bursty Errored Seconds
256 DM - Degraded Minutes
512 LCV - Line Code Violationsro INTEGER .1.3.6.1.4.1.664.2.3.2.1.4 |
adDS1FarCurrentAlertThis DS1 performance status variable indicates Threshold
Crossing Alerts for Far End Current 15 minute interval.
An alert bit is set in this variable when the value of
the dsx1FarEndCurrentTable object exceeds the Threshold
Value. This variable contains the sum of alert values.
Threshold Crossing Alert bit position values:
1 ES - Errored Seconds
2 SES - Severely Errored Seconds
4 SEFS - Severely Errored Framing Seconds
8 UAS - Unavailable Seconds
16 CSS - Controlled Slip Seconds
32 PCV - Path Coding Violations
64 LES - Line Errored Seconds
128 BES - Bursty Errored Seconds
256 DM - Degraded Minutesro INTEGER .1.3.6.1.4.1.664.2.3.2.1.5 |
adDS1FarTotalAlertThis DS1 performance status variable indicates Threshold
Crossing Alerts for Far End Total performance variables.
An alert bit is set in this variable when the value of
the dsx1FarEndTotalTable object exceeds the Threshold
Value. This variable contains the sum of alert values.
Threshold Crossing Alert bit position values:
1 ES - Errored Seconds
2 SES - Severely Errored Seconds
4 SEFS - Severely Errored Framing Seconds
8 UAS - Unavailable Seconds
16 CSS - Controlled Slip Seconds
32 PCV - Path Coding Violations
64 LES - Line Errored Seconds
128 BES - Bursty Errored Seconds
256 DM - Degraded Minutesro INTEGER .1.3.6.1.4.1.664.2.3.2.1.6 |
adDS1CurrentArmThis variable arms and disarms an individual or group
of alerts identified in adDS1CurrentAlert as a source
for the generation of Threshold Crossing Alert Trap.
This variable contains the sum of Arm values.
Threshold Crossing Arm bit position values:
1 ES - Errored Seconds
2 SES - Severely Errored Seconds
4 SEFS - Severely Errored Framing Seconds
8 UAS - Unavailable Seconds
16 CSS - Controlled Slip Seconds
32 PCV - Path Coding Violations
64 LES - Line Errored Seconds
512 LCV - Line Code Violationsrw INTEGER .1.3.6.1.4.1.664.2.3.2.1.7 |
adDS1TotalArmThis variable arms and disarms an individual or group
of alerts identified in adDS1TotalAlert as a source
for the generation of Threshold Crossing Alert Trap.
This variable contains the sum of Arm values.
Threshold Crossing Arm bit position values:
1 ES - Errored Seconds
2 SES - Severely Errored Seconds
4 SEFS - Severely Errored Framing Seconds
8 UAS - Unavailable Seconds
16 CSS - Controlled Slip Seconds
32 PCV - Path Coding Violations
64 LES - Line Errored Seconds
512 LCV - Line Code Violationsrw INTEGER .1.3.6.1.4.1.664.2.3.2.1.8 |
adDS1FarCurrentArmThis variable arms and disarms an individual or group
of alerts identified in adDS1FarCurrentAlert as a source
for the generation of Threshold Crossing Alert Trap.
This variable contains the sum of Arm values.
Threshold Crossing Arm bit position values:
1 ES - Errored Seconds
2 SES - Severely Errored Seconds
4 SEFS - Severely Errored Framing Seconds
8 UAS - Unavailable Seconds
16 CSS - Controlled Slip Seconds
32 PCV - Path Coding Violations
64 LES - Line Errored Seconds
128 BES - Bursty Errored Seconds
256 DM - Degraded Minutesrw INTEGER .1.3.6.1.4.1.664.2.3.2.1.9 |
adDS1FarTotalArmThis variable arms and disarms an individual or group
of alerts identified in adDS1FarTotalAlert as a source
for the generation of Threshold Crossing Alert Trap.
This variable contains the sum of Arm values.
Threshold Crossing Arm bit position values:
1 ES - Errored Seconds
2 SES - Severely Errored Seconds
4 SEFS - Severely Errored Framing Seconds
8 UAS - Unavailable Seconds
16 CSS - Controlled Slip Seconds
32 PCV - Path Coding Violations
64 LES - Line Errored Seconds
128 BES - Bursty Errored Seconds
256 DM - Degraded Minutesrw INTEGER .1.3.6.1.4.1.664.2.3.2.1.10 |
adDS1CurrentThreshold OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.3.3 |
adDS1CurrentThrsESThe DS1 performance monitor Threshold Value for the
Current 15 minute Errored Seconds parameter. The
default value is 65 for an approximate BER level of
(10** -5).rw INTEGER .1.3.6.1.4.1.664.2.3.3.1 |
adDS1CurrentThrsSESThe DS1 performance monitor Threshold Value for the
Current 15 minute Severely Errored Seconds parameter.
The default value is 10 for an approximate BER level of
(10** -5).rw INTEGER .1.3.6.1.4.1.664.2.3.3.2 |
adDS1CurrentThrsSEFSThe DS1 performance monitor Threshold Value for the
Current 15 minute Severely Errored Framing Seconds
parameter. The default value is 2 for an approximate
BER level of (10** -5).rw INTEGER .1.3.6.1.4.1.664.2.3.3.3 |
adDS1CurrentThrsUASThe DS1 performance monitor Threshold Value for the
Current 15 minute Unavailable Seconds parameter. The
default value is 10 for an approximate BER level of
(10** -5).rw INTEGER .1.3.6.1.4.1.664.2.3.3.4 |
adDS1CurrentThrsCSSThe DS1 performance monitor Threshold Value for the
Current 15 minute Controlled Slip Seconds parameter.
The default value is 1 for an approximate BER level of
(10** -5).rw INTEGER .1.3.6.1.4.1.664.2.3.3.5 |
adDS1CurrentThrsPCVsfThe DS1 performance monitor Threshold Value for the
Current 15 minute Path Coding Violations parameter,
when the Line Type is Super Frame (AT&T D4 format) DS1.
Default value for an approximate BER level of (10**-5)
is 72 Framing errors.rw INTEGER .1.3.6.1.4.1.664.2.3.3.6 |
adDS1CurrentThrsPCVesfThe DS1 performance monitor Threshold Value for the
Current 15 minute Path Coding Violations parameter,
when the Line Type is Extended Super Frame (ESF) DS1.
Default value for an approximate BER level of (10**-5)
is 13,296 CRC errors.rw INTEGER .1.3.6.1.4.1.664.2.3.3.7 |
adDS1CurrentThrsLESThe DS1 performance monitor Threshold Value for the
Current 15 minute Line Errored Seconds parameter.
The default value is 65 for an approximate BER level of
(10** -5).rw INTEGER .1.3.6.1.4.1.664.2.3.3.8 |
adDS1CurrentThrsLCVThe DS1 performance monitor Threshold Value for the
Current 15 minute Line Code Violations parameter. The
default value is 13,340 for an approximate BER level of
(10** -5).rw INTEGER .1.3.6.1.4.1.664.2.3.3.9 |
adDS1TotalThreshold OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.3.4 |
adDS1TotalThrsESThe DS1 performance monitor Threshold Value for the
Total Errored Seconds parameter. The default value
is 648 for an approximate BER level of (10** -5).rw INTEGER .1.3.6.1.4.1.664.2.3.4.1 |
adDS1TotalThrsSESThe DS1 performance monitor Threshold Value for the
Total Severely Errored Seconds parameter. The default
value is 100 for an approximate BER level of (10** -5).rw INTEGER .1.3.6.1.4.1.664.2.3.4.2 |
adDS1TotalThrsSEFSThe DS1 performance monitor Threshold Value for the
Total Severely Errored Framing Seconds parameter. The
default value is 17 for an approximate BER level of
(10** -5).rw INTEGER .1.3.6.1.4.1.664.2.3.4.3 |
adDS1TotalThrsUASThe DS1 performance monitor Threshold Value for the
Total Unavailable Seconds parameter. The default value
is 10 for an approximate BER level of (10** -5).rw INTEGER .1.3.6.1.4.1.664.2.3.4.4 |
adDS1TotalThrsCSSThe DS1 performance monitor Threshold Value for the
Total Controlled Slip Seconds parameter. The default
value is 4 for an approximate BER level of(10** -5).rw INTEGER .1.3.6.1.4.1.664.2.3.4.5 |
adDS1TotalThrsPCVsfThe DS1 performance monitor Threshold Value for the
Total Path Coding Violations parameter, when the Line
Type is Super Frame (AT&T D4 format) DS1. The default
value for an approximate BER level of (10**-5) is 691
framing errors.rw INTEGER .1.3.6.1.4.1.664.2.3.4.6 |
adDS1TotalThrsPCVesfThe DS1 performance monitor Threshold Value for the
Total Path Coding Violations parameter, when the Line
Type is Extended Super Frame (ESF) DS1. The default
value for an approximate BER level of (10**-5) is
132,960 CRC errors.rw INTEGER .1.3.6.1.4.1.664.2.3.4.7 |
adDS1TotalThrsLESThe DS1 performance monitor Threshold Value for the
Total Line Errored Seconds parameter. The default value
is 648 for an approximate BER level of (10** -5).rw INTEGER .1.3.6.1.4.1.664.2.3.4.8 |
adDS1TotalThrsLCVThe DS1 performance monitor Threshold Value for the
Total Line Code Violations parameter. The default value
is 133,400 for an approximate BER level of (10** -5).rw INTEGER .1.3.6.1.4.1.664.2.3.4.9 |