ADTRAN-AOS-3G
AI MIB Summary
The ADTRAN-AOS-3G MIB module enables monitoring of 3G cellular interface operational parameters and performance counters on ADTRAN AOS-based routers and switches. It provides visibility into critical 3G subsystem metrics, including signal strength, data session states, and interface status, to facilitate troubleshooting of cellular WAN connectivity.
A MIB module for monitoring 3G module values.
Main OID:
adGenAOS3GMib.1.3.6.1.4.1.664.6.10000.53.6.2
52
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
52 total| Object Name |
|---|
adGenAOS3G OBJECT IDENTIFIER .1.3.6.1.4.1.664.5.53.6.2 |
adGenAOS3GTrapsThe table contains traps/alarms caused by changes in configuration values and when statistical data reach certain thresholds. OBJECT IDENTIFIER .1.3.6.1.4.1.664.5.53.6.2.0 |
rssiDataRangeAlarmThis trap signifies that the SNMP entity, acting in an agent role, has detected that the RSSI data value object for the 3G cellular interface has exceeded the range specified by the user. NOTIFICATION-TYPE .1.3.6.1.4.1.664.5.53.6.2.0.1 |
ecioDataRangeAlarmThis trap signifies that the SNMP entity, acting in an agent role, has detected that the ECIO data value object for the 3G cellular interface has exceeded the range specified by the user. NOTIFICATION-TYPE .1.3.6.1.4.1.664.5.53.6.2.0.2 |
rssiDataRangeClearThis trap signifies that the SNMP entity, acting in an agent role, has detected that the RSSI data value object for the 3G cellular interface has returned to the range specified by the user. NOTIFICATION-TYPE .1.3.6.1.4.1.664.5.53.6.2.0.3 |
ecioDataRangeClearThis trap signifies that the SNMP entity, acting in an agent role, has detected that the ECIO data value object for the 3G cellular interface has returned to the range specified by the user. NOTIFICATION-TYPE .1.3.6.1.4.1.664.5.53.6.2.0.4 |
configValueSetThis trap signifies that the SNMP entity, acting in an agent role, has detected that a data value object for the 3G cellular interface from the 3G Hardware Table has been modified from the previous state. NOTIFICATION-TYPE .1.3.6.1.4.1.664.5.53.6.2.0.5 |
modemResetAlarmThis trap signifies that the SNMP entity, acting in an agent role, has detected that the 3G modem has been reset. NOTIFICATION-TYPE .1.3.6.1.4.1.664.5.53.6.2.0.6 |
serviceTypeChangeAlarmThis trap signifies that the SNMP entity, acting in an agent role, has detected that the service type for the 3G cellular interface has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.664.5.53.6.2.0.7 |
connectionStateDownAlarmThis trap signifies that the SNMP entity, acting in an agent role, has detected that the connection status of the modem has gone down from either DORMANT or a CONNECTED state. NOTIFICATION-TYPE .1.3.6.1.4.1.664.5.53.6.2.0.8 |
adGenAOS3GTableThe table contains 3G cellular statistical data for the cellular interface. SEQUENCE OF AdGenAOS3GEntry .1.3.6.1.4.1.664.5.53.6.2.1 |
adGenAOS3GEntryThis is an entry into the 3G table. AdGenAOS3GEntry .1.3.6.1.4.1.664.5.53.6.2.1.1 |
adGenAOS3GNetworkAccessIDThe Network Access ID is the User ID submitted by the 3G Modem during Mobile IP authentication. For more information, refer to RFC 4282.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.5.53.6.2.1.1.1 |
adGenAOS3GHASSThis OID displays whether the shared secret for the home agent has been set for Mobile IP authentication.ro Bits .1.3.6.1.4.1.664.5.53.6.2.1.1.2 |
adGenAOS3GHASPIThe Home Agent Security Parameter Index uniquely identifies a security association for the home agent for use during Mobile IP authentication.ro Unsigned32 .1.3.6.1.4.1.664.5.53.6.2.1.1.3 |
adGenAOS3GAAASSThis OID displays whether the shared secret for AAA has been set for Mobile IP authentication.ro Bits .1.3.6.1.4.1.664.5.53.6.2.1.1.4 |
adGenAOS3GAAASPIThe AAA Security Parameter Index uniquely identifies a security association for AAA for use during Mobile IP authentication.ro Unsigned32 .1.3.6.1.4.1.664.5.53.6.2.1.1.5 |
adGenAOS3GReverseTunnelingThis OID describes if a tunnel is setup from the 3G module's care of address to the home agent. A care of address is a temporary IP address for a mobile device.ro Bits .1.3.6.1.4.1.664.5.53.6.2.1.1.6 |
adGenAOS3GHomeAddressThe permanent home IP address for the 3G module in the cellular network.ro IpAddress .1.3.6.1.4.1.664.5.53.6.2.1.1.7 |
adGenAOS3GPrimaryHomeAddressThe primary IP address of the 3G module's home agent.ro IpAddress .1.3.6.1.4.1.664.5.53.6.2.1.1.8 |
adGenAOS3GSecHomeAddressThe secondary IP address of the 3G module's home agent.ro IpAddress .1.3.6.1.4.1.664.5.53.6.2.1.1.9 |
adGenAOS3GRSSIThe Receive Signal Strength Indicator for the cellular connection. This value is a measurement of signal strength.ro Integer32 .1.3.6.1.4.1.664.5.53.6.2.1.1.10 |
adGenAOS3GECIOThe Ec/Io for the cellular connection. This is the ratio of received pilot energy to the total received energy. The value is similar to signal-to-noise ratio.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.5.53.6.2.1.1.11 |
adGenAOS3GPnOffsetThe Pn Offset for the cellular connection. Base stations assigned to a particular frequency carrier operate at the same center frequency. The PN offset is used to distinguish base stations from one another.ro Integer32 .1.3.6.1.4.1.664.5.53.6.2.1.1.12 |
adGenAOS3GServiceTypeThe current Cellular Service Type for the cellular connection.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.5.53.6.2.1.1.13 |
adGenAOS3GServiceTypePreferenceThe current Cellular Service Type Preference for the cellular connection. Cellular Service Type can be forced to 1xRTT mode or 1xEVDO mode. By default, it is set to Hybrid or AUTO mode which chooses the best available signal.rw Enumeration .1.3.6.1.4.1.664.5.53.6.2.1.1.14 |
adGenAOS3GConnectionStateThe current Connection State for the cellular connection.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.5.53.6.2.1.1.15 |
adGenAOS3GECIOIntegerValueThe Ec/Io for the cellular connection displayed in integer form. This is the ratio of received pilot energy to the total received energy. The value is similar to signal-to-noise ratio. EC/IO values typically are represented as a value with a decimal place. In this representation the value will be scaled by 10. Hence a value of 1.5 will be represented as 15.ro Integer32 .1.3.6.1.4.1.664.5.53.6.2.1.1.16 |
adGenAOS3GHardwareDataTableThe table contains profile information for the 3G cellular interface. SEQUENCE OF AdGenAOS3GHardwareDataEntry .1.3.6.1.4.1.664.5.53.6.2.2 |
adGenAOS3GHardwareDataEntryThis is an entry into the 3G hardware data table. AdGenAOS3GHardwareDataEntry .1.3.6.1.4.1.664.5.53.6.2.2.1 |
adGenAOS3GSystemIDThe System Identification number is the identifier for a cellular network in a certain area.ro Unsigned32 .1.3.6.1.4.1.664.5.53.6.2.2.1.1 |
adGenAOS3GNetworkIDThe Network Identification number identifies a subset of a particular SID corresponding to different networks.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.5.53.6.2.2.1.2 |
adGenAOS3GPrefferedRoamListThe PRL is a database of cell towers that the cellular modem can roam on. This OID specifies the current version of that database that is programmed onto the cellular modem.ro Unsigned32 .1.3.6.1.4.1.664.5.53.6.2.2.1.3 |
adGenAOS3GMobileDirNumberThe MDN is the 10 digit phone number assigned to the 3G module.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.5.53.6.2.2.1.4 |
adGenAOS3GESNThe Electronic Serial Number is is a unique number that identifies the 3G module.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.5.53.6.2.2.1.5 |
adGenAOS3GMobileStationIDThe MSID is a 10 digit number that identifies the 3G module in the network.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.5.53.6.2.2.1.6 |
adGenAOS3GHardwareVersionThe hardware version of the 3G modem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.5.53.6.2.2.1.7 |
adGenAOS3GFirmwareVersionThe firmware version of the 3G modem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.5.53.6.2.2.1.8 |
adGenAOS3GThresholdDataTableThe table contains settings regarding whether the trap is enabled and threshold values for certain traps. SEQUENCE OF AdGenAOS3GThresholdDataEntry .1.3.6.1.4.1.664.5.53.6.2.3 |
adGenAOS3GThresholdDataEntryThis is an entry into the 3G threshold data table. AdGenAOS3GThresholdDataEntry .1.3.6.1.4.1.664.5.53.6.2.3.1 |
adGenAOS3GEnableTrapsThis OID indicates whether traps are enabled for the interface.rw Enumeration .1.3.6.1.4.1.664.5.53.6.2.3.1.1 |
adGenAOS3GRSSIThresholdThis is a value from (-200..200) that sets the threshold for an RSSI trap to occur. When the RSSI is below this value, it will cause an RSSI alarm trap. When the RSSI rises above this value, it will cause an RSSI cleared trap.rw Integer32 (-200..200) .1.3.6.1.4.1.664.5.53.6.2.3.1.2 |
adGenAOS3GECIOThresholdThis is a value from (-200..200) that sets the threshold for an ECIO trap to occur. When the ECIO is below this value, it will cause an ECIO alarm trap. When the ECIO rises above this value, it will cause an ECIO cleared trap.rw Integer32 (-200..200) .1.3.6.1.4.1.664.5.53.6.2.3.1.3 |
adGenAOS3GConformance OBJECT IDENTIFIER .1.3.6.1.4.1.664.5.53.99.9 |
adGenAOS3GGroup OBJECT IDENTIFIER .1.3.6.1.4.1.664.5.53.99.9.1 |
adGenAOS3GTableGroupThis group contains 3G cellular statistical data for profile information. Unknown .1.3.6.1.4.1.664.5.53.99.9.1.1 |
adGenAOS3GHardwareDataGroupThis group contains 3G cellular statistical data for hardware information. Unknown .1.3.6.1.4.1.664.5.53.99.9.1.2 |
adGenAOS3GThresholdDataGroupThis group contains threshold data for enabling 3G interface thresholds. Unknown .1.3.6.1.4.1.664.5.53.99.9.1.3 |
adGenAOS3GTrapGroupTraps which may be used to enhance event driven management of the interface. Unknown .1.3.6.1.4.1.664.5.53.99.9.1.4 |
adGenAOS3GCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.664.5.53.99.9.2 |
adGenAOS3GFullComplianceThe compliance statement for SNMP entities which implement version 2 of the adGenAOS3G MIB. Unknown .1.3.6.1.4.1.664.5.53.99.9.2.1 |
adGenAOS3GMibA MIB module for monitoring 3G module values. MODULE-IDENTITY .1.3.6.1.4.1.664.6.10000.53.6.2 |