ZYXEL-XGS360028F-FUNCTION-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
752
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
752 total| Object Name |
|---|
zyxel MODULE-IDENTITY .1.3.6.1.4.1.890 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.890.1 |
accessSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5 |
esSeries OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8 |
xgs360028fProductId OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78 |
xgs360028fSystem OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1 |
xgs360028fSystemInformation OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.1 |
xgs360028fModelNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.1 |
xgs360028fBIOSVersionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.2 |
xgs360028fFirmwareVersionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.3 |
xgs360028fHardwareMechanicalVersionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.4 |
xgs360028fSeriesNumberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.5 |
xgs360028fHostMACAddressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.6 |
xgs360028fConsoleBaudratero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.7 |
xgs360028fRAMSizero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.8 |
xgs360028fFlashSizero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.9 |
xgs360028fBridgeFBDSizero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.10 |
xgs360028fTransmitQueuero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.11 |
xgs360028fMaximumFrameSizero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.12 |
xgs360028fCPULoadro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.13 |
xgs360028fFanSpeedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.14 |
xgs360028fPowersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.15 |
xgs360028fTemperature1ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.16 |
xgs360028fTemperature2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.17 |
xgs360028fTemperature3ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.18 |
xgs360028fTemperature4ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.1.19 |
xgs360028fSystemTime OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.2 |
xgs360028fSystemTimeManual OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.2.1 |
xgs360028fSystemTimeManualClockSourcedefault: 0,
0 : Use Local Settings,
1 : Use NTP Server.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.1.2.1.1 |
xgs360028fSystemTimeManualLocaltimeGet/Set the system time of the device.
The input format is 'Year-Month-Day Hour:Minute:Second'.
ex: 2011-01-01 05:43:05 means 2011/1/1 - 05:43:05 .
The value range:
Year : 2010 - 2090,
Mouth : 1 - 12,
Day : 1 - 31,
Hour : 0 - 23,
Minute : 0 - 59,
Sec : 0 - 59.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.2.1.2 |
xgs360028fSystemTimeManualTimeZoneOffsetGet/Set the NTP Time Zone.
The value range is between -720 and 780 (minutes).rw INTEGER(-720..780) .1.3.6.1.4.1.890.1.5.8.78.1.2.1.3 |
xgs360028fSystemTimeManualDaylightSavingsdefault: 0,
0 : Disable,
1 : Enable.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.1.2.1.4 |
xgs360028fSystemTimeManualTimeSetOffsetGet/Set the Daylight Saving Time.
The value range is between 1 and 1440 (minutes),
Default : 60 (minutes).rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.2.1.5 |
xgs360028fSystemTimeManualDaylightSavingsTypedefault: 0,
0 : By dates,
1 : Recurring.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.1.2.1.6 |
xgs360028fSystemTimeManualDaylightSavingsBydatesFromGet/Set the Start time of By dates Daylight Savings.
The input format is 'Year-Month-Day Hour:Minute'.
ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 .
The value range:
Year : 2010 - 2090,
Mouth : 1 - 12,
Day : 1 - 31,
Hour : 0 - 23,
Minute : 0 - 59.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.2.1.7 |
xgs360028fSystemTimeManualDaylightSavingsBydatesToGet/Set the End time of By dates Daylight Savings.
The input format is 'Year-Month-Day Hour:Minute'.
ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 .
The value range:
Year : 2010 - 2090,
Mouth : 1 - 12,
Day : 1 - 31,
Hour : 0 - 23,
Minute : 0 - 59.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.2.1.8 |
xgs360028fSystemTimeManualDaylightSavingsRecurringDayFromGet/Set the Daylight Saving Time Day From.
0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.2.1.9 |
xgs360028fSystemTimeManualDaylightSavingsRecurringWeekFromGet/Set the Daylight Saving Time Week From.
1 : first week, 2, 3, 4, 5 : last weekrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.2.1.10 |
xgs360028fSystemTimeManualDaylightSavingsRecurringMonthFromGet/Set the Daylight Saving Time Month From.
1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun,
7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.2.1.11 |
xgs360028fSystemTimeManualDaylightSavingsRecurringTimeFromGet/Set the Start time of By dates Daylight Savings.
The input format is 'Hour:Minute'.
ex: 05:43.
The value range:
Hour : 0 - 23,
Minute : 0 - 59.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.2.1.12 |
xgs360028fSystemTimeManualDaylightSavingsRecurringDayToGet/Set the Daylight Saving Time Day To.
0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.2.1.13 |
xgs360028fSystemTimeManualDaylightSavingsRecurringWeekToGet/Set the Daylight Saving Time Week To.
1 : first week, 2, 3, 4, 5 : last weekrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.2.1.14 |
xgs360028fSystemTimeManualDaylightSavingsRecurringMonthToGet/Set the Daylight Saving Time Month To.
1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun,
7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.2.1.15 |
xgs360028fSystemTimeManualDaylightSavingsRecurringTimeToGet/Set the Start time of By dates Daylight Savings.
The input format is 'Hour:Minute'.
ex: 05:43.
The value range:
Hour : 0 - 23,
Minute : 0 - 59.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.2.1.16 |
xgs360028fSystemTimeNTP OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.2.2 |
xgs360028fSystemTimeNTPTable SEQUENCE OF XGS360028FSystemTimeNTPEntry .1.3.6.1.4.1.890.1.5.8.78.1.2.2.1 |
xgs360028fSystemTimeNTPEntry XGS360028FSystemTimeNTPEntry .1.3.6.1.4.1.890.1.5.8.78.1.2.2.1.1 |
xgs360028fSystemTimeNTPIndexThe index of the ntp entry. INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.2.2.1.1.1 |
xgs360028fSystemTimeNTPServerIPTypeDefault: 0,
0 : IPv4,
1 : IPv6.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.1.2.2.1.1.2 |
xgs360028fSystemTimeNTPServerGet/Set the NTP Time Server1. You can use the IP address or domain name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.2.2.1.1.3 |
xgs360028fSystemTimeNTPCurrentMode0: Empty
1: Active
2: Edit
3: Deleterw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.2.2.1.1.4 |
xgs360028fSystemAccount OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.3 |
xgs360028fSystemAccountUsers OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.3.1 |
xgs360028fSystemAccountUserCreatedefault: 0
0 : None (read only)
1 : Create a user accountrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.1.3.1.1 |
xgs360028fSystemAccountUsersTable SEQUENCE OF XGS360028FSystemAccountUsersEntry .1.3.6.1.4.1.890.1.5.8.78.1.3.1.2 |
xgs360028fSystemAccountUsersEntry XGS360028FSystemAccountUsersEntry .1.3.6.1.4.1.890.1.5.8.78.1.3.1.2.1 |
xgs360028fUserIndex INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.1.2.1.1 |
xgs360028fUserNamerw DisplayString .1.3.6.1.4.1.890.1.5.8.78.1.3.1.2.1.2 |
xgs360028fPasswordrw DisplayString .1.3.6.1.4.1.890.1.5.8.78.1.3.1.2.1.3 |
xgs360028fUserPrivilegeLeveldefault:1
User privilege level range : 1 - 15rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.1.2.1.4 |
xgs360028fAccountUserRowStatus1: active
2: notInservice
3: edit
4: destroy
5: undorw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.1.2.1.5 |
xgs360028fSystemAccountPrivilegeLevel OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.3.2 |
xgs360028fAccountPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.1 |
xgs360028fAggregationPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.2 |
xgs360028fDiagnosticsPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.3 |
xgs360028fEPSPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.5 |
xgs360028fERPSPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.6 |
xgs360028fETHLinkOAMPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.7 |
xgs360028fEVCPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.8 |
xgs360028fGARPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.10 |
xgs360028fGVRPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.11 |
xgs360028fIPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.12 |
xgs360028fIPMCSnoopingPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.13 |
xgs360028fLACPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.14 |
xgs360028fLLDPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.15 |
xgs360028fLLDPMEDPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.16 |
xgs360028fLoopProtectPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.17 |
xgs360028fMACTablePrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.18 |
xgs360028fMEPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.20 |
xgs360028fMRSTPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.21 |
xgs360028fMVRPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.22 |
xgs360028fMaintenancePrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.24 |
xgs360028fMirroringPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.25 |
xgs360028fPTPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.26 |
xgs360028fPortsPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.27 |
xgs360028fPrivateVLANsPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.28 |
xgs360028fQoSPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.29 |
xgs360028fSMTPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.31 |
xgs360028fSNMPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.32 |
xgs360028fSecurityPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.33 |
xgs360028fSpanningTreePrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.35 |
xgs360028fSystemPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.36 |
xgs360028fTrapEventPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.37 |
xgs360028fVCLPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.39 |
xgs360028fVLANTranslationPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.40 |
xgs360028fVLANsPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.3.2.41 |
xgs360028fIP OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.4 |
xgs360028fIPv4 OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.4.1 |
xgs360028fIPv4Configured OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.4.1.1 |
xgs360028fIpv4DHCPClientdefault:0
0: disable
1: enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.1.4.1.1.1 |
xgs360028fIPv4Addressrw IpAddress .1.3.6.1.4.1.890.1.5.8.78.1.4.1.1.2 |
xgs360028fIPv4Maskrw IpAddress .1.3.6.1.4.1.890.1.5.8.78.1.4.1.1.3 |
xgs360028fIPv4Routerrw IpAddress .1.3.6.1.4.1.890.1.5.8.78.1.4.1.1.4 |
xgs360028fIPv4VLANIddefault:1rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.4.1.1.5 |
xgs360028fIPv4DNSServerrw IpAddress .1.3.6.1.4.1.890.1.5.8.78.1.4.1.1.6 |
xgs360028fIPv4DNSProxyrw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.1.4.1.1.7 |
xgs360028fIPv4Current OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.4.1.2 |
xgs360028fIpv4CurrentDHCPClientdefault:0
0: none (for read)
1: renewrw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.1.4.1.2.1 |
xgs360028fIPv4CurrentAddressro IpAddress .1.3.6.1.4.1.890.1.5.8.78.1.4.1.2.2 |
xgs360028fIPv4CurrentMaskro IpAddress .1.3.6.1.4.1.890.1.5.8.78.1.4.1.2.3 |
xgs360028fIPv4CurrentRouterro IpAddress .1.3.6.1.4.1.890.1.5.8.78.1.4.1.2.4 |
xgs360028fIPv4CurrentVLANIddefault:1ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.4.1.2.5 |
xgs360028fIPv4CurrentDNSServerro IpAddress .1.3.6.1.4.1.890.1.5.8.78.1.4.1.2.6 |
xgs360028fIPv6 OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.4.2 |
xgs360028fIPv6Configured OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.4.2.1 |
xgs360028fIpv6AutoConfigurationdefault:0
0: disable
1: enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.1.4.2.1.1 |
xgs360028fIpv6Addressrw DisplayString .1.3.6.1.4.1.890.1.5.8.78.1.4.2.1.2 |
xgs360028fIpv6Prefixdefault: 96rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.4.2.1.3 |
xgs360028fIpv6Routerrw DisplayString .1.3.6.1.4.1.890.1.5.8.78.1.4.2.1.4 |
xgs360028fIPv6Current OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.4.2.2 |
xgs360028fIpv6CurrentAutoConfigurationdefault:0
0: disable
1: enablero INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.1.4.2.2.1 |
xgs360028fIpv6CurrentAddressro DisplayString .1.3.6.1.4.1.890.1.5.8.78.1.4.2.2.2 |
xgs360028fIpv6CurrentLinkLocalAddressro DisplayString .1.3.6.1.4.1.890.1.5.8.78.1.4.2.2.3 |
xgs360028fIpv6CurrentPrefixro INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.4.2.2.4 |
xgs360028fIpv6CurrentRouterro DisplayString .1.3.6.1.4.1.890.1.5.8.78.1.4.2.2.5 |
xgs360028fSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.5 |
xgs360028fSyslogConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.5.1 |
xgs360028fServerModedefault: 0
0: disable
1: enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.1.5.1.1 |
xgs360028fServerAddress1rw IpAddress .1.3.6.1.4.1.890.1.5.8.78.1.5.1.2 |
xgs360028fServerAddress2rw IpAddress .1.3.6.1.4.1.890.1.5.8.78.1.5.1.3 |
xgs360028fSyslogLeveldefault: 6 (Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.5.1.4 |
xgs360028fSyslogDetailedInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.5.2 |
xgs360028fSyslogDetailedInfoCleardefault: 0
0 : None (read only)
1 : Clear Syslogrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.1.5.2.1 |
xgs360028fSyslogDetailedInfoTable SEQUENCE OF XGS360028FSyslogDetailedInfoEntry .1.3.6.1.4.1.890.1.5.8.78.1.5.2.2 |
xgs360028fSyslogDetailedInfoEntry XGS360028FSyslogDetailedInfoEntry .1.3.6.1.4.1.890.1.5.8.78.1.5.2.2.1 |
xgs360028fSyslogDetailedInfoIndex INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.5.2.2.1.1 |
xgs360028fSyslogDetailedInfoLevelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.5.2.2.1.2 |
xgs360028fSyslogDetailedInfoTimero DisplayString .1.3.6.1.4.1.890.1.5.8.78.1.5.2.2.1.3 |
xgs360028fSyslogDetailedInfoMessagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.5.2.2.1.4 |
xgs360028fSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.6 |
xgs360028fSnmpConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.1.6.1 |
xgs360028fGetCommunityGet/Set the get-community of the SNMP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.6.1.1 |
xgs360028fSetCommunityModeGet/Set the set-community mode of the SNMP.
default : 1, 0: disable, 1: enable.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.1.6.1.2 |
xgs360028fSetCommunityGet/Set the set-community of the SNMP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.6.1.3 |
xgs360028fTrapHostConfTableA list of trap host entry. The numbers of entries are given by the value of xgs360028fTrapHostConfNumber. SEQUENCE OF XGS360028FTrapHostConfEntry .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4 |
xgs360028fTrapHostConfEntryThis is the entry information for trap host. XGS360028FTrapHostConfEntry .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4.1 |
xgs360028fTrapHostConfIndexThe index of the trap host entry. INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4.1.1 |
xgs360028fTrapHostConfVersionThe version of the Trap PDU. Version : 2(SNMPv2c), 3(SNMPv3)rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4.1.2 |
xgs360028fTrapHostConfIPTypeServer IP Type. Default: 4,
4 : IPv4,
6 : IPv6.rw INTEGER(4|6) .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4.1.3 |
xgs360028fTrapHostConfIPThis is the IP of the trap host.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4.1.4 |
xgs360028fTrapHostConfPortThis is the receiving-port number of the trap host.
range : 1 - 65535.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4.1.5 |
xgs360028fTrapHostConfCommunityThe community/security name for the trap PDU.rw DisplayString .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4.1.6 |
xgs360028fTrapHostConfSeverityLevelThe Severity Level.
0 : Emerg, 1 : Alert, 2 : Crit, 3 : Error, 4 : Warning, 5 : Notice, 6 : Info, 7 : Debug.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4.1.7 |
xgs360028fTrapHostConfSecurityLevelThe Security Level, NoAuthNoPriv, AuthNoPriv, and AuthPriv.
1 : NoAuthNoPriv, 2 : AuthNoPriv, 3 : AuthPriv.
Privacy protocol will be configured as 'DES' automatically if security level is 3(AuthPriv).rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4.1.8 |
xgs360028fTrapHostConfAuthPtcAuthentication Protocol, there are SHA and MD5 supported presently.
1 : MD5, 2 : SHA.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4.1.9 |
xgs360028fTrapHostConfAuthPasswordAuthentication Password, is used for authenticating. The return value is always '********'.
If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters.
If the authentication protocol is SHA, the length of password should be 8 ~ 40 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4.1.10 |
xgs360028fTrapHostConfPrivPtcThis is the Privacy Protocol, which is used in AuthPriv. Only supports DES.
An empty string will be returned if the security level is not 3(AuthPriv).
1 : DES.rw INTEGER(1) .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4.1.11 |
xgs360028fTrapHostConfPrivPasswordThe password is Privacy Key. The return value is always '********'. This Key
must be more than 8 characters, and less than 32 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4.1.12 |
xgs360028fTrapHostConfCurrentMode0:Empty, 1:Active mode, 2:Edit mode, 3:Delete.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.1.6.1.4.1.13 |
xgs360028fConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2 |
xgs360028fPort OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.1 |
xgs360028fPortConfigurationTableShow port configurations. SEQUENCE OF XGS360028FPortConfigurationEntry .1.3.6.1.4.1.890.1.5.8.78.2.1.1 |
xgs360028fPortConfigurationEntry XGS360028FPortConfigurationEntry .1.3.6.1.4.1.890.1.5.8.78.2.1.1.1 |
xgs360028fPortConfPortport, range : 1 - port number. INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.1.1.1.1 |
xgs360028fPortConfPortMediaShow port media.ro DisplayString .1.3.6.1.4.1.890.1.5.8.78.2.1.1.1.2 |
xgs360028fPortConfLinkThe current link state.ro DisplayString .1.3.6.1.4.1.890.1.5.8.78.2.1.1.1.3 |
xgs360028fPortConfCurrentSpeedThe current link speed of the port.ro DisplayString .1.3.6.1.4.1.890.1.5.8.78.2.1.1.1.4 |
xgs360028fPortConfSpeeddefault: 1,
0: disable state,
1: auto,
2: 10 Half,
3: 10 Full,
4: 100 Half,
5: 100 Full,
6: 1G full,
only 'Dual Media' port have 7-11 option.
Dual Media port default: 7,
7: SFP_Auto_AMS,
8: 100FX_AMS,
9: 1000X_AMS,
10: 100FX,
11: 1000Xrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.1.1.1.5 |
xgs360028fPortConfCurrentFlowControlRx0: disable
1: enable
2: not support.ro INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.2.1.1.1.6 |
xgs360028fPortConfCurrentFlowControlTx0: disable
1: enable
2: not support.ro INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.2.1.1.1.7 |
xgs360028fPortConfFlowControldefault: 0,
0: disable
1: enable
2: not support.rw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.2.1.1.1.8 |
xgs360028fPortConfMaxFrameSizedefault: 9600 , range : 1518 - 9600rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.1.1.1.9 |
xgs360028fPortConfExcessiveCollisionModedefault: 0,
Excessive Collision Mode :
0: Discard,
1: Restart,
2: not support.rw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.2.1.1.1.10 |
xgs360028fPortConfPowerControldefault: 0,
PowerControl :
0: disable,
1: Actiphy,
2: Dynamic (perfectReach),
3: Enable,
4: not support.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.1.1.1.11 |
xgs360028fPortConfDescriptionInterface specific description.
Up to 47 characters describing this interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.1.1.12 |
xgs360028fPortTrafficStatisticsTable SEQUENCE OF XGS360028FPortTrafficStatisticsEntry .1.3.6.1.4.1.890.1.5.8.78.2.1.2 |
xgs360028fPortTrafficStatisticsEntry XGS360028FPortTrafficStatisticsEntry .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1 |
xgs360028fPortTrafficStatisticsPort INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.1 |
xgs360028fPortTrafficStatisticsClearrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.2 |
xgs360028fPortTrafficRxPacketsro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.3 |
xgs360028fPortTrafficRxOctetsro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.4 |
xgs360028fPortTrafficRxUnicastro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.5 |
xgs360028fPortTrafficRxMulticastro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.6 |
xgs360028fPortTrafficRxBroadcastro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.7 |
xgs360028fPortTrafficRxPausero Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.8 |
xgs360028fPortTrafficRx64Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.9 |
xgs360028fPortTrafficRx65to127Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.10 |
xgs360028fPortTrafficRx128to255Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.11 |
xgs360028fPortTrafficRx256to511Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.12 |
xgs360028fPortTrafficRx512to1023Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.13 |
xgs360028fPortTrafficRx1024to1526Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.14 |
xgs360028fPortTrafficRxExceecd1527Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.15 |
xgs360028fPortTrafficRxQ0ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.16 |
xgs360028fPortTrafficRxQ1ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.17 |
xgs360028fPortTrafficRxQ2ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.18 |
xgs360028fPortTrafficRxQ3ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.19 |
xgs360028fPortTrafficRxQ4ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.20 |
xgs360028fPortTrafficRxQ5ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.21 |
xgs360028fPortTrafficRxQ6ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.22 |
xgs360028fPortTrafficRxQ7ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.23 |
xgs360028fPortTrafficRxDropsro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.24 |
xgs360028fPortTrafficRxCRCorAlignmentro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.25 |
xgs360028fPortTrafficRxUndersizero Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.26 |
xgs360028fPortTrafficRxOversizero Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.27 |
xgs360028fPortTrafficRxFragmentsro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.28 |
xgs360028fPortTrafficRxJabberro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.29 |
xgs360028fPortTrafficRxFilteredro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.30 |
xgs360028fPortTrafficTxPacketsro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.31 |
xgs360028fPortTrafficTxOctetsro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.32 |
xgs360028fPortTrafficTxUnicastro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.33 |
xgs360028fPortTrafficTxMulticastro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.34 |
xgs360028fPortTrafficTxBroadcastro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.35 |
xgs360028fPortTrafficTxPausero Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.36 |
xgs360028fPortTrafficTx64Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.37 |
xgs360028fPortTrafficTx65to127Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.38 |
xgs360028fPortTrafficTx128to255Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.39 |
xgs360028fPortTrafficTx256to511Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.40 |
xgs360028fPortTrafficTx512to1023Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.41 |
xgs360028fPortTrafficTx1024to1526Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.42 |
xgs360028fPortTrafficTxExceecd1527Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.43 |
xgs360028fPortTrafficTxQ0ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.44 |
xgs360028fPortTrafficTxQ1ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.45 |
xgs360028fPortTrafficTxQ2ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.46 |
xgs360028fPortTrafficTxQ3ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.47 |
xgs360028fPortTrafficTxQ4ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.48 |
xgs360028fPortTrafficTxQ5ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.49 |
xgs360028fPortTrafficTxQ6ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.50 |
xgs360028fPortTrafficTxQ7ro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.51 |
xgs360028fPortTrafficTxDropsro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.52 |
xgs360028fPortTrafficTxLateOrExcCollro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.2.1.53 |
xgs360028fPortQoSStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.1.3 |
xgs360028fPortQoSStatisticsCleardefault: 0
0: none
1: clearro INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.1.3.1 |
xgs360028fPortQoSStatisticsTable SEQUENCE OF XGS360028FPortQoSStatisticsEntry .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2 |
xgs360028fPortQoSStatisticsEntry XGS360028FPortQoSStatisticsEntry .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1 |
xgs360028fPortQoSStatisticsPort INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.1 |
xgs360028fPortQoSQ0Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.2 |
xgs360028fPortQoSQ0Txro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.3 |
xgs360028fPortQoSQ1Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.4 |
xgs360028fPortQoSQ1Txro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.5 |
xgs360028fPortQoSQ2Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.6 |
xgs360028fPortQoSQ2Txro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.7 |
xgs360028fPortQoSQ3Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.8 |
xgs360028fPortQoSQ3Txro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.9 |
xgs360028fPortQoSQ4Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.10 |
xgs360028fPortQoSQ4Txro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.11 |
xgs360028fPortQoSQ5Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.12 |
xgs360028fPortQoSQ5Txro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.13 |
xgs360028fPortQoSQ6Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.14 |
xgs360028fPortQoSQ6Txro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.15 |
xgs360028fPortQoSQ7Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.16 |
xgs360028fPortQoSQ7Txro Counter64 .1.3.6.1.4.1.890.1.5.8.78.2.1.3.2.1.17 |
xgs360028fSFPInfoTable SEQUENCE OF XGS360028FSFPInfoEntry .1.3.6.1.4.1.890.1.5.8.78.2.1.4 |
xgs360028fSFPInfoEntry XGS360028FSFPInfoEntry .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1 |
xgs360028fSFPInfoIndex INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.1 |
xgs360028fSFPInfoPortro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.2 |
xgs360028fSFPConnectorTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.3 |
xgs360028fSFPFiberTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.4 |
xgs360028fSFPTxCentralWavelengthro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.5 |
xgs360028fSFPBaudRatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.6 |
xgs360028fSFPVendorOUIro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.7 |
xgs360028fSFPVendorNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.8 |
xgs360028fSFPVendorPNro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.9 |
xgs360028fSFPVendorRevro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.10 |
xgs360028fSFPVendorSNro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.11 |
xgs360028fSFPDateCodero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.12 |
xgs360028fSFPTemperaturero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.13 |
xgs360028fSFPVccro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.14 |
xgs360028fSFPMon1Biasro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.15 |
xgs360028fSFPMon2TxPWRro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.16 |
xgs360028fSFPMon3RxPWRro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.1.4.1.17 |
xgs360028fGARP OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.3 |
xgs360028fGARPConfTable SEQUENCE OF XGS360028FGARPConfEntry .1.3.6.1.4.1.890.1.5.8.78.2.3.1 |
xgs360028fGARPConfEntry XGS360028FGARPConfEntry .1.3.6.1.4.1.890.1.5.8.78.2.3.1.1 |
xgs360028fGARPConfPort INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.3.1.1.1 |
xgs360028fGARPJoinTimerdefault: 200, range : 200 - 1000rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.3.1.1.2 |
xgs360028fGARPLeaveTimerdefault: 600 , range : 600 - 3000rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.3.1.1.3 |
xgs360028fGARPLeaveAllTimerdefault: 10000, range : 10000 - 50000rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.3.1.1.4 |
xgs360028fGARPApplicantiondefault: 1
1: GVRPrw INTEGER(1) .1.3.6.1.4.1.890.1.5.8.78.2.3.1.1.5 |
xgs360028fGARPAttributeTypedefault: 1
1: VLANrw INTEGER(1) .1.3.6.1.4.1.890.1.5.8.78.2.3.1.1.6 |
xgs360028fGARPApplicantdefault: 0
0: normal-participant
1: non-participantrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.3.1.1.7 |
xgs360028fGARPStatisticsTableShow the basic GARP port statistics. SEQUENCE OF XGS360028FGARPStatisticsEntry .1.3.6.1.4.1.890.1.5.8.78.2.3.2 |
xgs360028fGARPStatisticsEntry XGS360028FGARPStatisticsEntry .1.3.6.1.4.1.890.1.5.8.78.2.3.2.1 |
xgs360028fGARPStatisticsPortport, range : 1 - port number. INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.3.2.1.1 |
xgs360028fGARPStatisticsPeerMACPeer MAC is MAC address of the neighbour Switch from with GARP frame is received.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.3.2.1.2 |
xgs360028fGARPStatisticsFailedCountexplain Failed count here.ro Counter32 .1.3.6.1.4.1.890.1.5.8.78.2.3.2.1.3 |
xgs360028fGVRP OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.4 |
xgs360028fGVRPConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.4.1 |
xgs360028fGVRPModedefault: 0,
0: disable,
1: enable.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.4.1.1 |
xgs360028fGVRPConfTable SEQUENCE OF XGS360028FGVRPConfEntry .1.3.6.1.4.1.890.1.5.8.78.2.4.1.2 |
xgs360028fGVRPConfEntry XGS360028FGVRPConfEntry .1.3.6.1.4.1.890.1.5.8.78.2.4.1.2.1 |
xgs360028fGVRPConfPort INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.4.1.2.1.1 |
xgs360028fGVRPConfPortModedefault: 0
1: enable
0: disablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.4.1.2.1.2 |
xgs360028fGVRPConfPortRRoledefault: 0
1: enable
0: disablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.4.1.2.1.3 |
xgs360028fGVRPStatisticsTable SEQUENCE OF XGS360028FGVRPStatisticsEntry .1.3.6.1.4.1.890.1.5.8.78.2.4.2 |
xgs360028fGVRPStatisticsEntry XGS360028FGVRPStatisticsEntry .1.3.6.1.4.1.890.1.5.8.78.2.4.2.1 |
xgs360028fGVRPStatisticsPort INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.4.2.1.1 |
xgs360028fGVRPStatisticsJoinTxCntro Counter32 .1.3.6.1.4.1.890.1.5.8.78.2.4.2.1.2 |
xgs360028fGVRPStatisticsLeaveTxCntro Counter32 .1.3.6.1.4.1.890.1.5.8.78.2.4.2.1.3 |
xgs360028fThermalProtection OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.5 |
xgs360028fPriority0Temperaturedefault: 255, range : 0 - 255rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.5.1 |
xgs360028fPriority1Temperaturedefault: 255, range : 0 - 255rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.5.2 |
xgs360028fPriority2Temperaturedefault: 255, range : 0 - 255rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.5.3 |
xgs360028fPriority3Temperaturedefault: 255, range : 0 - 255rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.5.4 |
xgs360028fThermalProtectionTable SEQUENCE OF XGS360028FThermalProtectionEntry .1.3.6.1.4.1.890.1.5.8.78.2.5.5 |
xgs360028fThermalProtectionEntry XGS360028FThermalProtectionEntry .1.3.6.1.4.1.890.1.5.8.78.2.5.5.1 |
xgs360028fThermalProtectionPort INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.5.5.1.1 |
xgs360028fThermalProtectionPortTemperaturero INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.5.5.1.2 |
xgs360028fThermalProtectionPortPrioritydefault: 0, range : 0 - 3rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.5.5.1.3 |
xgs360028fThermalProtectionPortStatusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.5.5.1.4 |
xgs360028fMirroring OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.6 |
xgs360028fPortToMirrorOndefault: 0
0: disable,
range : 1 - port number.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.6.1 |
xgs360028fMirrorTable SEQUENCE OF XGS360028FMirrorEntry .1.3.6.1.4.1.890.1.5.8.78.2.6.2 |
xgs360028fMirrorEntry XGS360028FMirrorEntry .1.3.6.1.4.1.890.1.5.8.78.2.6.2.1 |
xgs360028fMirrorPort INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.6.2.1.1 |
xgs360028fMirrorModedefault: 0
0: disable
1: enable
2: rx only
3: tx only
Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignoredrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.6.2.1.2 |
xgs360028fTrapEventSeverity OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.7 |
xgs360028fTrapEventSeverityACLdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.1 |
xgs360028fTrapEventSeverityACLLogdefault: 7(Debug)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.2 |
xgs360028fTrapEventSeverityAccessMgmtdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.3 |
xgs360028fTrapEventSeverityAuthFaileddefault: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.4 |
xgs360028fTrapEventSeverityColdStartdefault: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.5 |
xgs360028fTrapEventSeverityConfigInfodefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.6 |
xgs360028fTrapEventSeverityFirmwareUpgradedefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.7 |
xgs360028fTrapEventSeverityImportExportdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.8 |
xgs360028fTrapEventSeverityLACPdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.9 |
xgs360028fTrapEventSeverityLinkStatusdefault: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.10 |
xgs360028fTrapEventSeverityLogindefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.11 |
xgs360028fTrapEventSeverityLogoutdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.12 |
xgs360028fTrapEventSeverityLoopProtectdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.13 |
xgs360028fTrapEventSeverityMgmtIPChangedefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.14 |
xgs360028fTrapEventSeverityModuleChangedefault: 5(Notice)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.15 |
xgs360028fTrapEventSeverityNASdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.16 |
xgs360028fTrapEventSeverityPasswdChangedefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.17 |
xgs360028fTrapEventSeverityPortSecuritydefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.18 |
xgs360028fTrapEventSeverityThermalProtectdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.19 |
xgs360028fTrapEventSeverityVLANdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.20 |
xgs360028fTrapEventSeverityWarmStartdefault: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.7.21 |
xgs360028fSMTP OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.8 |
xgs360028fSMTPMailServerUp to 47 characters describing email server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.8.1 |
xgs360028fSMTPUserNameUp to 47 characters describing user name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.8.2 |
xgs360028fSMTPPasswordUp to 47 characters describing password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.8.3 |
xgs360028fSMTPServeriryLeveldefault: 6
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.8.4 |
xgs360028fSMTPSenderUp to 47 characters describing sender.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.8.5 |
xgs360028fSMTPReturnPathUp to 47 characters describing return path.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.8.6 |
xgs360028fSMTPEmailAddress1Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.8.7 |
xgs360028fSMTPEmailAddress2Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.8.8 |
xgs360028fSMTPEmailAddress3Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.8.9 |
xgs360028fSMTPEmailAddress4Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.8.10 |
xgs360028fSMTPEmailAddress5Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.8.11 |
xgs360028fSMTPEmailAddress6Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.8.12 |
xgs360028fACL OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.9 |
xgs360028fACLPortsConfTable SEQUENCE OF XGS360028FACLPortsConfEntry .1.3.6.1.4.1.890.1.5.8.78.2.9.1 |
xgs360028fACLPortsConfEntry XGS360028FACLPortsConfEntry .1.3.6.1.4.1.890.1.5.8.78.2.9.1.1 |
xgs360028fACLPortsConfPort INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.1.1.1 |
xgs360028fACLPortsConfPolicyIDdefault: 0, range : 0 - 255rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.1.1.2 |
xgs360028fACLPortsConfActiondefault: 1,
0: Deny
1: Permitrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.9.1.1.3 |
xgs360028fACLPortsConfRateLimiterIDdefault: 0,
0: Disable
range : 0 - 16rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.1.1.4 |
xgs360028fACLPortsConfPortRedirectdefault: 0
0: Disable
range : 0 - end port numberrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.1.1.5 |
xgs360028fACLPortsConfLoggingdefault: 0
0: Disable
1: Enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.9.1.1.7 |
xgs360028fACLPortsConfShutdowndefault: 0
0: Disable
1: Enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.9.1.1.8 |
xgs360028fACLPortsConfStatedefault: 1
0: Disable
1: Enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.9.1.1.9 |
xgs360028fACLPortsConfCounterCounts the number of frames that match this ACE.ro Counter32 .1.3.6.1.4.1.890.1.5.8.78.2.9.1.1.10 |
xgs360028fACLRateLimiterTable SEQUENCE OF XGS360028FACLRateLimiterEntry .1.3.6.1.4.1.890.1.5.8.78.2.9.2 |
xgs360028fACLRateLimiterEntry XGS360028FACLRateLimiterEntry .1.3.6.1.4.1.890.1.5.8.78.2.9.2.1 |
xgs360028fACLRateLimiterIDRate Limiter ID.
range : 1-16 INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.2.1.1 |
xgs360028fACLRateLimiterRatedefault: 1,
range : <0-3276700> ppsrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.2.1.3 |
xgs360028fACLACE OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.9.3 |
xgs360028fACLACECreatedefault: 0
0 : None (read only)
1 : Create an ACE entryrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.1 |
xgs360028fACLACETableCreate ACL ACE entry. SEQUENCE OF XGS360028FACLACEEntry .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2 |
xgs360028fACLACEEntry XGS360028FACLACEEntry .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1 |
xgs360028fACLACEIndex INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.1 |
xgs360028fACLACEIDIf the ACE ID is specified and an entry with this ACE ID
already exists, the ACE will be modified. Otherwise, a
new ACE will be added.
range : 1 - 256.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.2 |
xgs360028fACLACENextIDIf the next ACE ID is non zero, the ACE will be placed
before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.3 |
xgs360028fACLACEIngressPortIndicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.Format: 1,3,6.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.4 |
xgs360028fACLACEPortPolicyNumberpolicy value.
range : 0 - 255.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.5 |
xgs360028fACLACEPortPolicyBitmaskpolicy bitmask.
range : 0 - 255(0xff).rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.6 |
xgs360028fACLACEFrameType0: any,
1: arp,
2: etype,
3: icmp,
4: ipv4,
5: tcp,
6: udp.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.7 |
xgs360028fACLACEActiondefault: 1,
0: Deny
1: Permitrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.8 |
xgs360028fACLACEDenyPortRedirectFrames that hit the ACE are redirected to the port number specified here.
Disabled: indicates that the port redirect operation is disabled.
Port Format: 1,3,6.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.9 |
xgs360028fACLACELoggingdefault: 0,
0: disable - Frames matching the ACE are not logged.
1: enable - Frames matching the ACE are stored in the system log.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.10 |
xgs360028fACLACERateLimiterdefault: 0,
0: Disable
range : 0 - 16rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.12 |
xgs360028fACLACEShutdowndefault: 0,
0: disable - Port shut down is disabled for the AC.
1: enable - If a frame matches the ACE, the ingress port will be disabled.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.13 |
xgs360028fACLACEVLANTagPrioritySpecify the tag priority for this ACE.
The tag priority can't be set when 802.1Q Tagged is disabled
default: 8,
8: Any,
range : 0 - 8rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.15 |
xgs360028fACLACEVLANVIDSpecify the VLAN ID filter for this ACE.
The vid can't be set when 802.1Q Tagged is disabled.
default: 0,
0: Any - No VLAN ID filter is specified.
range : 0 - 4094rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.16 |
xgs360028fACLACEEtherType0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6).
range : 0 or 1536(0x0600)- 65535(0xffff).rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.17 |
xgs360028fACLACESMACConfigure source MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this source MAC address value.
Any: Don't care.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.18 |
xgs360028fACLACEDMACTypeDMAC Type.
default: 0,
0: Any - Don't care.
1: Broadcast - Frame must be broadcast.
2: Unicast - Frame must be unicast.
3: Multicast - Frame must be multicast.
4: mac address
range : 0 - 4rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.19 |
xgs360028fACLACEDMACConfigure destination MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this destination MAC address value.
Any: Don't care.
Broadcast: Frame must be broadcast.
Unicast: Frame must be unicast.
Multicast: Frame must be multicast.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.20 |
xgs360028fACLACEArpOpcodeConfigure ARP opcode for this ACE.
default: 0,
0: Any - Don't care.
1: arp.
2: rarp.
3: other.
4: No data.
range : 0 - 3rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.21 |
xgs360028fACLACEArpFlagsRequestReplySpecify the available ARP/RARP opcode (OP) flag for this ACE.
default: 2,
0: Frame must have ARP Reply or RARP Reply OP flag.
1: Frame must have ARP Request or RARP Request OP flag set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.22 |
xgs360028fACLACEArpFlagsArpSmacSpecify whether frames can hit the action according to their sender hardware address field (SHA) settings.
default: 2,
0: ARP frames where SHA is not equal to the SMAC address.
1: ARP frames where SHA is equal to the SMAC address.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.23 |
xgs360028fACLACEArpFlagsRarpDmacSpecify whether frames can hit the action according to their target hardware address field (THA) settings.
default: 2,
0: RARP frames where THA is not equal to the DMAC address.
1: RARP frames where THA is equal to the DMAC address.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.24 |
xgs360028fACLACEArpFlagsLengthSpecify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and
protocol address length (PLN) settings.
default: 2,
0: ARP/RARP frames where the HLN is not equal to Ethernet(0x06) or the (PLN) is not equal to IPv4(0x04).
1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4(0x04).
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.25 |
xgs360028fACLACEArpFlagsIpSpecify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings.
default: 2,
0: ARP/RARP frames where the HLD is not equal to Ethernet(1).
1: ARP/RARP frames where the HLD is equal to Ethernet(1).
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.26 |
xgs360028fACLACEArpFlagsEthernetSpecify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings.
default: 2,
0: ARP/RARP frames where the PRO is not equal to IP\n(0x800).
1: ARP/RARP frames where the PRO is equal to IP(0x800).
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.27 |
xgs360028fACLACESIPTypeConfigure source IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.28 |
xgs360028fACLACESIPIPAddressA frame that hits this ACE matches this source IP address value.rw IpAddress .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.29 |
xgs360028fACLACESIPNetworkPrefixNetwork prefix.
default: 32,
0: No data.
range : 1 - 32rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.30 |
xgs360028fACLACEDIPTypeConfigure destination IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.32 |
xgs360028fACLACEDIPIPAddressA frame that hits this ACE matches this destination IP address value.rw IpAddress .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.33 |
xgs360028fACLACEDIPNetworkPrefixNetwork prefix.
default: 32,
0: No data.
range : 1 - 32rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.34 |
xgs360028fACLACEIPProtocolConfigure IP protocol for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.36 |
xgs360028fACLACEIPFlagsTTLConfigure IP Time-to-Live flags for this ACE.
default: 2,
0: IPv4 frames with a Time-to-Live field is equal to zero.
1: IPv4 frames with a Time-to-Live field greater than zero.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.37 |
xgs360028fACLACEIPFlagsOptionsConfigure IP options flag for this ACE.
default: 2,
0: IPv4 frames where the options flag is unset.
1: IPv4 frames where the options flag is set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.38 |
xgs360028fACLACEIPFlagsFragmentConfigure IP fragment offset flags for this ACE.
default: 2,
0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero.
1: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.39 |
xgs360028fACLACEICMPTypeConfigure ICMP type for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.40 |
xgs360028fACLACEICMPCodeConfigure ICMP code for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.41 |
xgs360028fACLACESourcePortMinConfigure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.42 |
xgs360028fACLACESourcePortMaxConfigure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.43 |
xgs360028fACLACEDestPortMinConfigure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.44 |
xgs360028fACLACEDestPortMaxConfigure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.45 |
xgs360028fACLACETCPFlagsFinConfigure TCP (FIN) flags for this ACE.
default: 2,
0: TCP frames where the FIN field is unset.
1: TCP frames where the FIN field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.46 |
xgs360028fACLACETCPFlagsSynConfigure TCP (SYN) flags for this ACE.
default: 2,
0: TCP frames where the SYN field is unset.
1: TCP frames where the SYN field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.47 |
xgs360028fACLACETCPFlagsRstConfigure TCP (RST) flags for this ACE.
default: 2,
0: TCP frames where the RST field is unset.
1: TCP frames where the RST field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.48 |
xgs360028fACLACETCPFlagsPshConfigure TCP (PSH) flags for this ACE.
default: 2,
0: TCP frames where the PSH field is unset.
1: TCP frames where the PSH field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.49 |
xgs360028fACLACETCPFlagsAckConfigure TCP (ACK) flags for this ACE.
default: 2,
0: TCP frames where the ACK field is unset.
1: TCP frames where the ACK field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.50 |
xgs360028fACLACETCPFlagsUrgConfigure TCP (URG) flags for this ACE.
default: 2,
0: TCP frames where the URG field is unset.
1: TCP frames where the URG field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.51 |
xgs360028fACLACERowStatus1: active
2: notInservice
4: destroy
5: undorw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.66 |
xgs360028fACLACECleardefault: 0
0 : No action
1 : Clear all ACL counters.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.3 |
xgs360028fACLACEMoveACEIDMove ACE,
default: 0
ACE ID must be exist.
range : 1 - 256.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.4 |
xgs360028fACLACEMoveNextACEIDMove ACE,
default: 0
If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.5 |
xgs360028fACLACEStatusTableACL ACE Status entry. SEQUENCE OF XGS360028FACLACEStatusEntry .1.3.6.1.4.1.890.1.5.8.78.2.9.3.6 |
xgs360028fACLACEStatusEntry XGS360028FACLACEStatusEntry .1.3.6.1.4.1.890.1.5.8.78.2.9.3.6.1 |
xgs360028fACLACEStatusIndex INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.6.1.1 |
xgs360028fACLACEStatusUserIndicates the ACL user.
S : Static.
IPMG : IP Management.
IPSG : IP Source Guard.
IPMC : IPMC.
ARPI : Arp Inspection.
UPnP : UPnP.
DHCP : DHCP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.6.1.2 |
xgs360028fACLACEStatusIDACE ID.
range : 1 - 256.ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.9.3.6.1.3 |
xgs360028fACLACEStatusIngressPortIndicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.6.1.4 |
xgs360028fACLACEStatusFrameTypeIndicates the frame type of the ACE.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.6.1.5 |
xgs360028fACLACEStatusActionIndicates the forwarding action of the ACE.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.6.1.6 |
xgs360028fACLACEStatusRateLimiterIndicates the rate limiter number of the ACE.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.6.1.7 |
xgs360028fACLACEStatusPortCopyIndicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.6.1.8 |
xgs360028fACLACEStatusMirrorSpecify the mirror operation of this port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.6.1.9 |
xgs360028fACLACEStatusCPUForward packet that matched the specific ACE to CPU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.6.1.10 |
xgs360028fACLACEStatusCounterThe counter indicates the number of times the ACE was hit by a frame.ro Counter32 .1.3.6.1.4.1.890.1.5.8.78.2.9.3.6.1.11 |
xgs360028fACLACEStatusConflictIndicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.9.3.6.1.12 |
xgs360028fERPS OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.10 |
xgs360028fERPSConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.10.1 |
xgs360028fERPSConfCreatedefault: 0
0 : None (read only)
1 : Create an ERPS entryrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.10.1.1 |
xgs360028fERPSConfTableCreate one ERPS group. SEQUENCE OF XGS360028FERPSConfEntry .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2 |
xgs360028fERPSConfEntry XGS360028FERPSConfEntry .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1 |
xgs360028fERPSConfIndex INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.1 |
xgs360028fERPSConfERPSIDProtection group ID.
range : 1 - 64.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.2 |
xgs360028fERPSConfPort0East port of the switch in the ring.
range : 1 - 26.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.3 |
xgs360028fERPSConfPort1West port of the switch in the Ring.
As interconnected sub-ring will have only one ring port, W port is configured as 0 for interconnected sub-ring.
0: in this field indicates that no west port is associated with this instance.
range : 0 - 26.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.4 |
xgs360028fERPSConfPort0SFMEPThe East Signal Fail reporting MEP.
range : 1 - 32.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.5 |
xgs360028fERPSConfPort1SFMEPThe West Signal Fail reporting MEP. As only one SF MEP is associated with interconnected sub-ring without virtual channel,
it is configured as 0 for such ring instances. 0: in this field indicates that no west SF MEP is associated with this instance.
range : 0 - 32.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.6 |
xgs360028fERPSConfPort0APSMEPThe East APS PDU handling MEP.
range : 1 - 32.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.7 |
xgs360028fERPSConfPort1APSMEPThe West APS PDU handling MEP. As only one APS MEP is associated with interconnected sub-ring without virtual channel,
it is configured as 0 for such ring instances. 0: in this field indicates that no west APS MEP is associated with this instance.
range : 0 - 32.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.8 |
xgs360028fERPSConfRingTypeType of Protectiong ring. It can be either major ring or sub-ring.
default: 0,
0: Major
1: Subrw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.9 |
xgs360028fERPSConfInterconnectedNodeInterconnected Node indicates that the ring instance is interconnected.
default: 0,
0: No - indicates that the configured instance is not interconnected.
1: Yes - indicates it is an interconnected node for this instance.rw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.10 |
xgs360028fERPSConfVirtualChannelSub-rings can either have virtual channel or not on the interconnected node.
default: 0,
0: No - indicates, sub-ring doesn't have virtual channel.
1: Yes - indicates it is a sub-ring with virtual channel.rw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.11 |
xgs360028fERPSConfMajorRingIDMajor ring group ID for the interconnected sub-ring.
It is used to send topology change updates on major ring.
If ring is major, this value is same as the protection group ID of this ring.ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.12 |
xgs360028fERPSConfAlarmThere is an active alarm on the ERPS.ro DisplayString .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.13 |
xgs360028fERPSInstanceConfConfiguredDown: This ERPS is only created and has not yet been configured - is not active.
Up: This ERPS is configured - is active.ro DisplayString .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.14 |
xgs360028fERPSInstanceConfGuardTimeGuard timeout value to be used to prevent ring nodes from receiving outdated R-APS messages.
default : 500(ms).
range : 10 - 2000(ms).rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.15 |
xgs360028fERPSInstanceConfWTRTimeThe Wait To Restore timing value to be used in revertive switching.
default : 5(minutes).
range : 1 - 12(minutes).rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.16 |
xgs360028fERPSInstanceConfHoldOffTimeThe timing value to be used to make persistent check on Signal Fail before switching.
default : 0(seconds).
range : 0 - 10000(ms).rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.17 |
xgs360028fERPSInstanceConfVersionERPS version of a group.
default : 1.
0: v1
1: v2rw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.18 |
xgs360028fERPSInstanceConfRevertiveERPS revertibility of a group.
default : 1.
0: non-revertible
1: revertiblerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.19 |
xgs360028fERPSInstanceConfVLANconfigVID of the protected vlan.rw DisplayString .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.20 |
xgs360028fERPSConfRowStatus1: active
2: notInservice
3: edit
4: destroy
5: undorw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.10.1.2.1.21 |
xgs360028fMRSTP OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.11 |
xgs360028fMRSTPInstance OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.11.1 |
xgs360028fMRSTPInstanceConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.1 |
xgs360028fMRSTPInstanceConfGlobalStatedefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.11.1.1.1 |
xgs360028fMRSTPInstanceConfigurationTableshow instance configuration. SEQUENCE OF XGS360028FMRSTPInstanceConfigurationEntry .1.3.6.1.4.1.890.1.5.8.78.2.11.1.1.2 |
xgs360028fMRSTPInstanceConfigurationEntry XGS360028FMRSTPInstanceConfigurationEntry .1.3.6.1.4.1.890.1.5.8.78.2.11.1.1.2.1 |
xgs360028fMRSTPInstanceConfigurationInstancemrstp instance id, range : 1-12 INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.1.2.1.1 |
xgs360028fMRSTPInstanceConfigurationStateMRSTP instance state. To really enable an MRSTP instance, the MRSTP Global State must also be enabled.
default: 0,
0: disable
1: enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.2.11.1.1.2.1.2 |
xgs360028fMRSTPInstanceConfigurationVersionThe STP protocol version.
default: 1,
0: stp
1: rstprw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.2.11.1.1.2.1.3 |
xgs360028fMRSTPInstanceConfigurationPriorityThe instance priority would be truncated to a multiple of 4096.
range : 0 - 61440, default: 32768.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.1.2.1.4 |
xgs360028fMRSTPInstanceConfigurationHelloTimeThe interval between periodic transmissions of STP Configuration Messages by Designated Ports when the Bridge Instance is the Root Bridge.
range : 1 - 10 (seconds), and (HelloTime+1)*2 must be <= MaxAge.
default: 2.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.1.2.1.5 |
xgs360028fMRSTPInstanceConfigurationMaxAgeThe maximum age of the information transmitted by the Bridge Instance when it is the Root Bridge.
range : 6 - 40 (seconds), and MaxAge must be <= (FwdDelay-1)*2.
default: 20.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.1.2.1.6 |
xgs360028fMRSTPInstanceConfigurationFWDelayThe delay used by an MRSTP Bridge Instance to transit Root and Designated Ports to Forwarding
(used in STP compatible mode).
range : 4 - 30 (seconds), and MaxAge must be <= (FwdDelay-1)*2.
default: 15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.1.2.1.7 |
xgs360028fMRSTPInstanceStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2 |
xgs360028fMRSTPInstanceStatusTableshow mrstp status of instance(s). SEQUENCE OF XGS360028FMRSTPInstanceStatusEntry .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1 |
xgs360028fMRSTPInstanceStatusEntry XGS360028FMRSTPInstanceStatusEntry .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1 |
xgs360028fMRSTPInstanceStatusInstancemrstp instance id, range : 1-12 INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.1 |
xgs360028fMRSTPInstanceStatusGlobalStateThe global state of MRSTP. If disabled,all instances won't be in an active state.
0: disable
1: enablero INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.2 |
xgs360028fMRSTPInstanceStatusInstanceConfigStateThe configured state of an MRSTP instance.
0: disable
1: enablero INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.3 |
xgs360028fMRSTPInstanceStatusInstanceCurrentStateThe operational state of an MRSTP Bridge Instance.
0: disable
1: enablero INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.4 |
xgs360028fMRSTPInstanceStatusBridgeIDThe Bridge ID of this Bridge instance.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.5 |
xgs360028fMRSTPInstanceStatusBridgePrioriryThe Bridge Priority of this Bridge instance. Value is shown in decimal.
range : 0 - 61440ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.6 |
xgs360028fMRSTPInstanceStatusRootIDThe Bridge ID of the currently elected root bridge.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.7 |
xgs360028fMRSTPInstanceStatusRootPriorityThe Bridge Priority of the currently elected root bridge. Value is shown in decimal.
range : 0 - 61440ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.8 |
xgs360028fMRSTPInstanceStatusRootPortThe switch port currently assigned the root port role.ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.9 |
xgs360028fMRSTPInstanceStatusRootPathCostFor the Root Bridge it is zero. For all other Bridges, it is the sum of the Port Path Costs on the least cost path to the Root Bridge.ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.10 |
xgs360028fMRSTPInstanceStatusCurrentMaxAgeThe Max Age inherited from the Root Bridge.
range : 6 - 40 (seconds)ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.11 |
xgs360028fMRSTPInstanceStatusCurrentForwardDelayThe Forward Delay time inherited from the Root Bridge.
range : 4 - 30 (seconds)ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.12 |
xgs360028fMRSTPInstanceStatusHelloTimeThe Hello Time inherited from the Root Bridge.
range : 1 - 10 (seconds)ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.13 |
xgs360028fMRSTPInstanceStatusTopologyChangeCountThe Topology Change Count since the MRSTP Bridge Instance is actually enabled.ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.14 |
xgs360028fMRSTPInstanceStatusTimeSinceLastTopologyChangeThe time since last Topology Change occurred.ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.1.2.1.1.15 |
xgs360028fMRSTPPort OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.11.2 |
xgs360028fMRSTPPortConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.11.2.1 |
xgs360028fMRSTPPortConfigurationTablecurrent MRSTP port configurations. SEQUENCE OF XGS360028FMRSTPPortConfigurationEntry .1.3.6.1.4.1.890.1.5.8.78.2.11.2.1.1 |
xgs360028fMRSTPPortConfigurationEntry XGS360028FMRSTPPortConfigurationEntry .1.3.6.1.4.1.890.1.5.8.78.2.11.2.1.1.1 |
xgs360028fMRSTPPortConfigurationPortThe switch port number of the MRSTP port. INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.2.1.1.1.1 |
xgs360028fMRSTPPortConfigurationInstanceMRSTP Bridge Instance. default: 0
range : 0 - 12, 0: Nonerw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.2.1.1.1.2 |
xgs360028fMRSTPPortConfigurationPathCostport path cost;when the value is 0,path cost is determined by physical port speed.
default: 0
range : 0 - 200000000, 0: Autorw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.2.1.1.1.3 |
xgs360028fMRSTPPortConfigurationPriorityPort Priority; would be truncated to a multiple of 16.
default: 128
range : 0 - 240rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.2.1.1.1.4 |
xgs360028fMRSTPPortConfigurationAdminEdgeport(s) as edge or non-edge.
default: 1
0: non-edge
1: edgerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.11.2.1.1.1.5 |
xgs360028fMRSTPPortConfigurationAdminP2Padministrative point-to-point (p2p) port.
range : 0 - 2, default: 2
0: force to be p2p port(s)
1: force to be non-p2p port(s)
2: auto-detected according to port duplexrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.2.1.1.1.6 |
xgs360028fMRSTPPortConfigurationMigrateCheckdefault: 0
0: none
1: perform migration check on port(s)rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.2.11.2.1.1.1.7 |
xgs360028fMRSTPPortStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.2.11.2.2 |
xgs360028fMRSTPPortStatusTableshow mrstp port information. SEQUENCE OF XGS360028FMRSTPPortStatusEntry .1.3.6.1.4.1.890.1.5.8.78.2.11.2.2.1 |
xgs360028fMRSTPPortStatusEntry XGS360028FMRSTPPortStatusEntry .1.3.6.1.4.1.890.1.5.8.78.2.11.2.2.1.1 |
xgs360028fMRSTPPortStatusPortThe switch port number of the MRSTP port. INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.2.2.1.1.1 |
xgs360028fMRSTPPortStatusInstanceMRSTP Bridge Instance.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.11.2.2.1.1.2 |
xgs360028fMRSTPPortStatusStateThe current RSTP port state. The port state can be one of the following values: DISCARDING LISTENING FORWARDING NON-MRSTP INST-DSBL.
INST-DSBL indicates that the Bridge Instance the port belongs to is disabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.11.2.2.1.1.3 |
xgs360028fMRSTPPortStatusRoleThe current MRSTP port role. The port role can be one of the following values: disable alternate backup ROOT DSGN none.
none indicates that the Bridge Instance the port belongs to is disabled or the port is not an MRSTP port.
DSGN indicates a Designated port role.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.11.2.2.1.1.4 |
xgs360028fMRSTPPortStatusPathCostpath cost.ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.2.2.1.1.5 |
xgs360028fMRSTPPortStatusPathCostConfigport path cost config.ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.2.2.1.1.6 |
xgs360028fMRSTPPortStatusPriorityport priority.ro INTEGER .1.3.6.1.4.1.890.1.5.8.78.2.11.2.2.1.1.7 |
xgs360028fMRSTPPortStatusAdminEdgeport(s) as edge or non-edge.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.11.2.2.1.1.8 |
xgs360028fMRSTPPortStatusAdminP2Padministrative point-to-point (p2p) port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.2.11.2.2.1.1.9 |
xgs360028fSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3 |
xgs360028fIPSourceGuard OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.1 |
xgs360028fIPSourceGuardConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.1.1 |
xgs360028fIPSourceGuardModedefault: 0
0: disable
1: enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.3.1.1.1 |
xgs360028fIPSourceGuardPortConfigTable SEQUENCE OF XGS360028FIPSourceGuardPortConfigEntry .1.3.6.1.4.1.890.1.5.8.78.3.1.1.2 |
xgs360028fIPSourceGuardPortConfigEntry XGS360028FIPSourceGuardPortConfigEntry .1.3.6.1.4.1.890.1.5.8.78.3.1.1.2.1 |
xgs360028fIPSourceGuardPortConfigPort INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.1.1.2.1.1 |
xgs360028fIPSourceGuardPortConfigModedefault: 0
0:disable
1:enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.3.1.1.2.1.2 |
xgs360028fIPSourceGuardPortMaxDynamicClientsdefault: 99
0~2: Max Dynamic clients
99:Unlimitedrw INTEGER (0..2|99) .1.3.6.1.4.1.890.1.5.8.78.3.1.1.2.1.3 |
xgs360028fIPSourceGuardStatic OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.1.2 |
xgs360028fIPSourceGuardStaticCreatedefault: 0
0 : None (read only)
1 : Create a IP Source Guardrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.1.2.1 |
xgs360028fIPSourceGuardStaticTable SEQUENCE OF XGS360028FIPSourceGuardStaticEntry .1.3.6.1.4.1.890.1.5.8.78.3.1.2.2 |
xgs360028fIPSourceGuardStaticEntry XGS360028FIPSourceGuardStaticEntry .1.3.6.1.4.1.890.1.5.8.78.3.1.2.2.1 |
xgs360028fIPSourceGuardStaticIndex INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.1.2.2.1.1 |
xgs360028fIPSourceGuardStaticPortPort, range: 1 - port number.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.1.2.2.1.2 |
xgs360028fIPSourceGuardStaticVLANIdVLAN ID, range: 1 - 4094.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.1.2.2.1.3 |
xgs360028fIPSourceGuardStaticIPAddressIP address allowed for doing IP source guard.rw IpAddress .1.3.6.1.4.1.890.1.5.8.78.3.1.2.2.1.4 |
xgs360028fIPSourceGuardStaticMACAddressAllowed Source MAC address, format 0a 1b 2c 3d 4e 5frw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.3.1.2.2.1.5 |
xgs360028fIPSourceGuardStaticRowStatus1: active
2: notInservice
3: edit
4: destroy
5: undorw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.1.2.2.1.6 |
xgs360028fIPSourceGuardDynamicTable SEQUENCE OF XGS360028FIPSourceGuardDynamicEntry .1.3.6.1.4.1.890.1.5.8.78.3.1.3 |
xgs360028fIPSourceGuardDynamicEntry XGS360028FIPSourceGuardDynamicEntry .1.3.6.1.4.1.890.1.5.8.78.3.1.3.1 |
xgs360028fIPSourceGuardDynamicIndex INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.1.3.1.1 |
xgs360028fIPSourceGuardDynamicPortro INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.1.3.1.2 |
xgs360028fIPSourceGuardDynamicVLANIdro INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.1.3.1.3 |
xgs360028fIPSourceGuardDynamicIPAddressro IpAddress .1.3.6.1.4.1.890.1.5.8.78.3.1.3.1.4 |
xgs360028fIPSourceGuardDynamicMACAddressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.3.1.3.1.5 |
xgs360028fARPInspection OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.2 |
xgs360028fARPInspectionConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.2.1 |
xgs360028fARPInspectionConfModedefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.2.1.1 |
xgs360028fARPInspectionConfTable SEQUENCE OF XGS360028FARPInspectionConfEntry .1.3.6.1.4.1.890.1.5.8.78.3.2.1.2 |
xgs360028fARPInspectionConfEntry XGS360028FARPInspectionConfEntry .1.3.6.1.4.1.890.1.5.8.78.3.2.1.2.1 |
xgs360028fARPInspectionConfPortIndex INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.2.1.2.1.1 |
xgs360028fARPInspectionConfPortModedefault: 0
0: disable
1: enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.3.2.1.2.1.2 |
xgs360028fARPInspectionStatic OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.2.2 |
xgs360028fARPInspectionStaticCreatedefault: 0
0: none
1: createrw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.3.2.2.1 |
xgs360028fARPInspectionStaticTable SEQUENCE OF XGS360028FARPInspectionStaticEntry .1.3.6.1.4.1.890.1.5.8.78.3.2.2.2 |
xgs360028fARPInspectionStaticEntry XGS360028FARPInspectionStaticEntry .1.3.6.1.4.1.890.1.5.8.78.3.2.2.2.1 |
xgs360028fARPInspectionStaticIndex INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.2.2.2.1.1 |
xgs360028fARPInspectionStaticPortPort, range: 1 - port number.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.2.2.2.1.2 |
xgs360028fARPInspectionStaticVLANIdVLAN ID, range: 1 - 4094.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.2.2.2.1.3 |
xgs360028fARPInspectionStaticIPAddressIP address allowed for doing ARP request.rw IpAddress .1.3.6.1.4.1.890.1.5.8.78.3.2.2.2.1.4 |
xgs360028fARPInspectionStaticMACAddressAllowed Source MAC address in ARP request packets, format 0a 1b 2c 3d 4e 5frw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.3.2.2.2.1.5 |
xgs360028fARPInspectionStaticRowStatus1: active
2: notInservice
3: edit
4: destroy
5: undorw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.2.2.2.1.6 |
xgs360028fARPInspectionDynamicTable SEQUENCE OF XGS360028FARPInspectionDynamicEntry .1.3.6.1.4.1.890.1.5.8.78.3.2.3 |
xgs360028fARPInspectionDynamicEntry XGS360028FARPInspectionDynamicEntry .1.3.6.1.4.1.890.1.5.8.78.3.2.3.1 |
xgs360028fARPInspectionDynamicIndex INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.2.3.1.1 |
xgs360028fARPInspectionDynamicPortro INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.2.3.1.2 |
xgs360028fARPInspectionDynamicVLANIdro INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.2.3.1.3 |
xgs360028fARPInspectionDynamicIPAddressro IpAddress .1.3.6.1.4.1.890.1.5.8.78.3.2.3.1.4 |
xgs360028fARPInspectionDynamicMACAddressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.3.2.3.1.5 |
xgs360028fDHCPSnooping OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.3 |
xgs360028fDHCPSnoopingConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.3.1 |
xgs360028fDHCPSnoopingModedefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.3.1.1 |
xgs360028fDHCPSnoopingPortModeConfigurationTable SEQUENCE OF XGS360028FDHCPSnoopingPortModeConfigurationEntry .1.3.6.1.4.1.890.1.5.8.78.3.3.1.2 |
xgs360028fDHCPSnoopingPortModeConfigurationEntry XGS360028FDHCPSnoopingPortModeConfigurationEntry .1.3.6.1.4.1.890.1.5.8.78.3.3.1.2.1 |
xgs360028fDHCPSnoopingPortModeConfigurationPort INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.3.1.2.1.1 |
xgs360028fDHCPSnoopingPortModeConfigurationModedefault: 1
0: trust port mode
1: untrust port moderw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.3.3.1.2.1.2 |
xgs360028fDHCPSnoopingStatisticsTable SEQUENCE OF XGS360028FDHCPSnoopingStatisticsEntry .1.3.6.1.4.1.890.1.5.8.78.3.3.2 |
xgs360028fDHCPSnoopingStatisticsEntry XGS360028FDHCPSnoopingStatisticsEntry .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1 |
xgs360028fDHCPSnoopingStatisticsPort INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.1 |
xgs360028fDHCPSnoopingStatisticsCleardefault: 0
0: none
1: clearrw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.2 |
xgs360028fDHCPSnoopingRxDiscoverro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.3 |
xgs360028fDHCPSnoopingRxOfferro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.4 |
xgs360028fDHCPSnoopingRxRequestro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.5 |
xgs360028fDHCPSnoopingRxDeclinero Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.6 |
xgs360028fDHCPSnoopingRxACKro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.7 |
xgs360028fDHCPSnoopingRxNAKro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.8 |
xgs360028fDHCPSnoopingRxReleasero Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.9 |
xgs360028fDHCPSnoopingRxInformro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.10 |
xgs360028fDHCPSnoopingRxLeaseQueryro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.11 |
xgs360028fDHCPSnoopingRxLeaseUnassignedro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.12 |
xgs360028fDHCPSnoopingRxLeaseUnknownro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.13 |
xgs360028fDHCPSnoopingRxLeaseActivero Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.14 |
xgs360028fDHCPSnoopingTxDiscoverro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.15 |
xgs360028fDHCPSnoopingTxOfferro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.16 |
xgs360028fDHCPSnoopingTxRequestro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.17 |
xgs360028fDHCPSnoopingTxDeclinero Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.18 |
xgs360028fDHCPSnoopingTxACKro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.19 |
xgs360028fDHCPSnoopingTxNAKro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.20 |
xgs360028fDHCPSnoopingTxReleasero Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.21 |
xgs360028fDHCPSnoopingTxInformro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.22 |
xgs360028fDHCPSnoopingTxLeaseQueryro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.23 |
xgs360028fDHCPSnoopingTxLeaseUnassignedro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.24 |
xgs360028fDHCPSnoopingTxLeaseUnknownro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.25 |
xgs360028fDHCPSnoopingTxLeaseActivero Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.3.2.1.26 |
xgs360028fDHCPRelay OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.4 |
xgs360028fDHCPRelayConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.4.1 |
xgs360028fDHCPRelayModedefault: 0
0: disable
1: enable
We need at least one serverrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.4.1.1 |
xgs360028fDHCPRelayServerrw IpAddress .1.3.6.1.4.1.890.1.5.8.78.3.4.1.2 |
xgs360028fDHCPRelayInformationModedefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.4.1.3 |
xgs360028fDHCPRelayInformationPolicydefault: 0
0: replace
1: keep
2: droprw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.4.1.4 |
xgs360028fDHCPRelayStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.4.2 |
xgs360028fDHCPRelayServerStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.4.2.1 |
xgs360028fServerStatTransmitToServerro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.1.1 |
xgs360028fServerStatTransmitErrorro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.1.2 |
xgs360028fServerStatReceiveFromServerro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.1.3 |
xgs360028fServerStatReceiveMissingAgentOptionro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.1.4 |
xgs360028fServerStatReceiveMissingCircuitIDro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.1.5 |
xgs360028fServerStatReceiveMissingRemoteIDro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.1.6 |
xgs360028fServerStatReceiveBadCircuitIDro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.1.7 |
xgs360028fServerStatReceiveBadRemoteIDro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.1.8 |
xgs360028fDHCPRelayClientStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.4.2.2 |
xgs360028fClientStatTransmitToClientro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.2.1 |
xgs360028fClientStatTransmitErrorro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.2.2 |
xgs360028fClientStatReceivefromClientro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.2.3 |
xgs360028fClientStatReceiveAgentOptionro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.2.4 |
xgs360028fClientStatReplaceAgentOptionro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.2.5 |
xgs360028fClientStatKeepAgentOptionro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.2.6 |
xgs360028fClientStatDropAgentOptionro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.4.2.2.7 |
xgs360028fPortSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.5 |
xgs360028fPortSecLimitCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.5.1 |
xgs360028fPortSecLimitCtrlSystemConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.5.1.1 |
xgs360028fPortSecurityModedefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.5.1.1.1 |
xgs360028fPortSecurityAgingdefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.5.1.1.2 |
xgs360028fPortSecurityAgingPerioddefault: 3600, range: 10-10000000rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.5.1.1.3 |
xgs360028fPortSecLimitCtrlTable SEQUENCE OF XGS360028FPortSecLimitCtrlEntry .1.3.6.1.4.1.890.1.5.8.78.3.5.1.2 |
xgs360028fPortSecLimitCtrlEntry XGS360028FPortSecLimitCtrlEntry .1.3.6.1.4.1.890.1.5.8.78.3.5.1.2.1 |
xgs360028fPortSecLimitCtrlPort INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.5.1.2.1.1 |
xgs360028fPortSecLimitCtrlPortModedefault: 0
0: disable
1: enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.3.5.1.2.1.2 |
xgs360028fPortSecLimitCtrlPortLimitdefault: 4, range: 1-1024rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.5.1.2.1.3 |
xgs360028fPortSecLimitCtrlPortActiondefault: 0
0: none
1: trap
2: shutdown
3: trap&shutdownrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.5.1.2.1.4 |
xgs360028fPortSecLimitCtrlPortStatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.3.5.1.2.1.5 |
xgs360028fPortSecLimitCtrlPortReOpendefault: 0
0: none
1: reopenrw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.78.3.5.1.2.1.6 |
xgs360028fPortSecSwitchStatusTable SEQUENCE OF XGS360028FPortSecSwitchStatusEntry .1.3.6.1.4.1.890.1.5.8.78.3.5.2 |
xgs360028fPortSecSwitchStatusEntry XGS360028FPortSecSwitchStatusEntry .1.3.6.1.4.1.890.1.5.8.78.3.5.2.1 |
xgs360028fPortSecSwitchStatusPort INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.5.2.1.1 |
xgs360028fPortSecSwitchStatusUsersUsers Abbr: L = Limit Control, 8 = 802.1X, D = DHCP Snooping, V = Voice VLAN,
'-' means that the corresponding user module is not enabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.3.5.2.1.2 |
xgs360028fPortSecSwitchStatusStateShows the current state of the port : Disabled, Ready, Limit Reached, Shutdown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.3.5.2.1.3 |
xgs360028fPortSecSwitchStatusMACCountCurrentro INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.5.2.1.4 |
xgs360028fPortSecSwitchStatusMACCountLimitro INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.5.2.1.5 |
xgs360028fPortSecPortStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.5.3 |
xgs360028fPortSecPortStatusPortdefault: 0
0 : Nonerw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.5.3.1 |
xgs360028fPortSecPortStatusTable SEQUENCE OF XGS360028FPortSecPortStatusEntry .1.3.6.1.4.1.890.1.5.8.78.3.5.3.2 |
xgs360028fPortSecPortStatusEntry XGS360028FPortSecPortStatusEntry .1.3.6.1.4.1.890.1.5.8.78.3.5.3.2.1 |
xgs360028fPortSecPortStatusIndex INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.5.3.2.1.1 |
xgs360028fPortSecPortStatusMACAddressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.3.5.3.2.1.2 |
xgs360028fPortSecPortStatusVLANIdro INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.5.3.2.1.3 |
xgs360028fPortSecPortStatusStateBlocked / Forwardingro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.3.5.3.2.1.4 |
xgs360028fPortSecPortStatusTimeOfAdditionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.3.5.3.2.1.5 |
xgs360028fPortSecPortStatusAgeAndHoldro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.3.5.3.2.1.6 |
xgs360028fAccessManagement OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.6 |
xgs360028fAccessMgtConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.6.1 |
xgs360028fAccessMgtConfModedefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.6.1.1 |
xgs360028fAccessMgtConfCreatedefault: 0
0: none
1: createrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.6.1.2 |
xgs360028fAccessMgtConfTable SEQUENCE OF XGS360028FAccessMgtConfEntry .1.3.6.1.4.1.890.1.5.8.78.3.6.1.3 |
xgs360028fAccessMgtConfEntry XGS360028FAccessMgtConfEntry .1.3.6.1.4.1.890.1.5.8.78.3.6.1.3.1 |
xgs360028fAccessMgtIndexSet Access Management config index
range : 1-16.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.6.1.3.1.1 |
xgs360028fAccessMgtAddresstype0: ipv4
1: ipv6rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.6.1.3.1.2 |
xgs360028fAccessMgtStartIpAddressStart IP address.
IP address doesn't allowed all zero or all 'ff'H.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.3.6.1.3.1.3 |
xgs360028fAccessMgtEndIpAddressEnd IP address.
IP address doesn't allowed all zero or all 'ff'H.
End ip address is not less than start ip address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.3.6.1.3.1.4 |
xgs360028fAccessMgtHttpHttpsdefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.6.1.3.1.5 |
xgs360028fAccessMgtSNMPdefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.6.1.3.1.6 |
xgs360028fAccessMgtTelnetSSHdefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.6.1.3.1.7 |
xgs360028fAccessMgtRowStatus1: active
2: notInservice
3: edit
4: destroy
5: undorw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.6.1.3.1.8 |
xgs360028fAccessMgtStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.6.2 |
xgs360028fHttpReceivedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.1 |
xgs360028fHttpAllowedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.2 |
xgs360028fHttpDiscardedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.3 |
xgs360028fHttpsReceivedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.4 |
xgs360028fHttpsAllowedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.5 |
xgs360028fHttpsDiscardedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.6 |
xgs360028fSnmpReceivedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.7 |
xgs360028fSnmpAllowedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.8 |
xgs360028fSnmpDiscardedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.9 |
xgs360028fTelnetReceivedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.10 |
xgs360028fTelnetAllowedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.11 |
xgs360028fTelnetDiscardedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.12 |
xgs360028fSSHReceivedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.13 |
xgs360028fSSHAllowedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.14 |
xgs360028fSSHDiscardedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.78.3.6.2.15 |
xgs360028fAccessMgtStatisticsClearAll0: none
1: clearrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.6.2.16 |
xgs360028fSSH OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.7 |
xgs360028fSSHModedefault: 1
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.7.1 |
xgs360028fHTTPS OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.8 |
xgs360028fHTTPSModedefault: 1
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.8.1 |
xgs360028fHTTPSAutoRedirectdefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.8.2 |
xgs360028fAuthMethod OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.3.9 |
xgs360028fConsoleAuthMethoddefault: 1
0: none
1: local
2: RADIUS
3: TACACS+rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.9.1 |
xgs360028fConsoleFallbackdefault: 0
0:disable
1:enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.9.2 |
xgs360028fTelnetAuthMethoddefault: 1
0: none
1: local
2: RADIUS
3: TACACS+rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.9.3 |
xgs360028fTelnetFallbackdefault: 0
0:disable
1:enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.9.4 |
xgs360028fSshAuthMethoddefault: 1
0: none
1: local
2: RADIUS
3: TACACS+rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.9.5 |
xgs360028fSshFallbackdefault: 0
0:disable
1:enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.9.6 |
xgs360028fWebAuthMethoddefault: 1
0: none
1: local
2: RADIUS
3: TACACS+rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.3.9.7 |
xgs360028fWebFallbackdefault: 0
0:disable
1:enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.3.9.8 |
xgs360028fMaintenance OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.4 |
xgs360028fRestartDevicedefault: 0
0:none
1:yesrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.4.1 |
xgs360028fFirmware OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.4.2 |
xgs360028fFirmwareIpAddressGet/Set the firmware tftp server.rw IpAddress .1.3.6.1.4.1.890.1.5.8.78.4.2.1 |
xgs360028fFirmwareFileNameGet/Set the path and filename for firmware upgrading.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.4.2.2 |
xgs360028fDoFirmwareUpgradeDo firmware upgrade. Get this OID always return zero.
1 - do firmware upgrade.
0 - do nothing.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.4.2.3 |
xgs360028fSaveOrRestore OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.4.3 |
xgs360028fFactoryDefaultsdefault: 0
0:none
1:yesrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.4.3.1 |
xgs360028fSaveStartdefault: 0
0:none
1:yesrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.4.3.2 |
xgs360028fSaveUserdefault: 0
0:none
1:yesrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.4.3.3 |
xgs360028fRestoreUserdefault: 0
0:none
1:yesrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.78.4.3.4 |
xgs360028fExportOrImport OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.4.4 |
xgs360028fExportIpAddressGet/Set the export tftp server.rw IpAddress .1.3.6.1.4.1.890.1.5.8.78.4.4.1 |
xgs360028fExportConfigNameGet/Set the export file path and name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.4.4.2 |
xgs360028fDoExportConfigDo export-config.
Get this OID always return zero.
1 - export.rw INTEGER(1) .1.3.6.1.4.1.890.1.5.8.78.4.4.3 |
xgs360028fImportIpAddressGet/Set the import tftp server.rw IpAddress .1.3.6.1.4.1.890.1.5.8.78.4.4.4 |
xgs360028fImportConfigNameGet/Set the import file path and name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.4.4.5 |
xgs360028fDoImportConfigDo export-config.
Get this OID always return zero.
1 - import.rw INTEGER(1) .1.3.6.1.4.1.890.1.5.8.78.4.4.6 |
xgs360028fDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.4.5 |
xgs360028fPingIpAddressThe destination IP Address.rw IpAddress .1.3.6.1.4.1.890.1.5.8.78.4.5.1 |
xgs360028fPingSizeSize of ICMP echo packet.
range : 60-1400, default : 64.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.4.5.2 |
xgs360028fDoPingConfigDo ping-config.
Get this OID always return zero.
1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram
to elicit an ICMP ECHO_RESPONSE from a host or gateway.rw INTEGER(1) .1.3.6.1.4.1.890.1.5.8.78.4.5.3 |
xgs360028fPingResultShow ping result.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.4.5.4 |
xgs360028fPing6IpAddressThe destination IPv6 Address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.4.5.5 |
xgs360028fPing6SizeSize of ICMP echo packet.
range : 60-1400.rw INTEGER .1.3.6.1.4.1.890.1.5.8.78.4.5.6 |
xgs360028fDoPing6ConfigDo ping-config.
Get this OID always return zero.
1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram
to elicit an ICMP ECHO_RESPONSE from a host or gateway.rw INTEGER(1) .1.3.6.1.4.1.890.1.5.8.78.4.5.7 |
xgs360028fPing6ResultShow ping result.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.4.5.8 |
xgs360028fVeriPHY OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.4.5.9 |
xgs360028fVeriPHYTestRun VeriPHY Cable Diagnostics.
port, range : 0 - port number.
0 : ALLrw INTEGER .1.3.6.1.4.1.890.1.5.8.78.4.5.9.1 |
xgs360028fVeriPHYTable SEQUENCE OF XGS360028FVeriPHYEntry .1.3.6.1.4.1.890.1.5.8.78.4.5.9.2 |
xgs360028fVeriPHYEntry XGS360028FVeriPHYEntry .1.3.6.1.4.1.890.1.5.8.78.4.5.9.2.1 |
xgs360028fVeriPHYPortThe length (in meters) of the cable pair. INTEGER .1.3.6.1.4.1.890.1.5.8.78.4.5.9.2.1.1 |
xgs360028fVeriPHYPairAThe status of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.4.5.9.2.1.2 |
xgs360028fVeriPHYLengthAThe length (in meters) of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.4.5.9.2.1.3 |
xgs360028fVeriPHYPairBThe status of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.4.5.9.2.1.4 |
xgs360028fVeriPHYLengthBThe length (in meters) of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.4.5.9.2.1.5 |
xgs360028fVeriPHYPairCThe status of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.4.5.9.2.1.6 |
xgs360028fVeriPHYLengthCThe length (in meters) of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.4.5.9.2.1.7 |
xgs360028fVeriPHYPairDThe status of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.4.5.9.2.1.8 |
xgs360028fVeriPHYLengthDThe length (in meters) of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.4.5.9.2.1.9 |
xgs360028fTrap OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.5 |
xgs360028fTrapEvent OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.5.1 |
xgs360028fEmergencyThe severity level is Emergency. The system is unusable. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.78.5.1.1 |
xgs360028fAlertThe severity level is Alert. The action must be taken immediately. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.78.5.1.2 |
xgs360028fCriticalThe severity level is Critical. Critical conditions. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.78.5.1.3 |
xgs360028fErrorThe severity level is Error. Error conditions. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.78.5.1.4 |
xgs360028fWarningThe severity level is Warning. Warning conditions. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.78.5.1.5 |
xgs360028fNoticeThe severity level is Notice. Normal but significant condition. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.78.5.1.6 |
xgs360028fInformationalThe severity level is Informational. Informational messages. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.78.5.1.7 |
xgs360028fDebugThe severity level is Debug. debug-level messages. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.78.5.1.8 |
xgs360028fTrapVariable OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.78.5.2 |
xgs360028fInformationTrap information.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.78.5.2.1 |