ZYXEL-XGS360026F-FUNCTION-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
752
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
752 total| Object Name |
|---|
zyxel MODULE-IDENTITY .1.3.6.1.4.1.890 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.890.1 |
accessSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5 |
esSeries OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8 |
xgs360026fProductId OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77 |
xgs360026fSystem OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1 |
xgs360026fSystemInformation OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.1 |
xgs360026fModelNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.1 |
xgs360026fBIOSVersionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.2 |
xgs360026fFirmwareVersionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.3 |
xgs360026fHardwareMechanicalVersionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.4 |
xgs360026fSeriesNumberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.5 |
xgs360026fHostMACAddressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.6 |
xgs360026fConsoleBaudratero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.7 |
xgs360026fRAMSizero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.8 |
xgs360026fFlashSizero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.9 |
xgs360026fBridgeFBDSizero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.10 |
xgs360026fTransmitQueuero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.11 |
xgs360026fMaximumFrameSizero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.12 |
xgs360026fCPULoadro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.13 |
xgs360026fFanSpeedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.14 |
xgs360026fPowersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.15 |
xgs360026fTemperature1ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.16 |
xgs360026fTemperature2ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.17 |
xgs360026fTemperature3ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.18 |
xgs360026fTemperature4ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.1.19 |
xgs360026fSystemTime OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.2 |
xgs360026fSystemTimeManual OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.2.1 |
xgs360026fSystemTimeManualClockSourcedefault: 0,
0 : Use Local Settings,
1 : Use NTP Server.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.1.2.1.1 |
xgs360026fSystemTimeManualLocaltimeGet/Set the system time of the device.
The input format is 'Year-Month-Day Hour:Minute:Second'.
ex: 2011-01-01 05:43:05 means 2011/1/1 - 05:43:05 .
The value range:
Year : 2010 - 2090,
Mouth : 1 - 12,
Day : 1 - 31,
Hour : 0 - 23,
Minute : 0 - 59,
Sec : 0 - 59.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.2.1.2 |
xgs360026fSystemTimeManualTimeZoneOffsetGet/Set the NTP Time Zone.
The value range is between -720 and 780 (minutes).rw INTEGER(-720..780) .1.3.6.1.4.1.890.1.5.8.77.1.2.1.3 |
xgs360026fSystemTimeManualDaylightSavingsdefault: 0,
0 : Disable,
1 : Enable.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.1.2.1.4 |
xgs360026fSystemTimeManualTimeSetOffsetGet/Set the Daylight Saving Time.
The value range is between 1 and 1440 (minutes),
Default : 60 (minutes).rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.2.1.5 |
xgs360026fSystemTimeManualDaylightSavingsTypedefault: 0,
0 : By dates,
1 : Recurring.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.1.2.1.6 |
xgs360026fSystemTimeManualDaylightSavingsBydatesFromGet/Set the Start time of By dates Daylight Savings.
The input format is 'Year-Month-Day Hour:Minute'.
ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 .
The value range:
Year : 2010 - 2090,
Mouth : 1 - 12,
Day : 1 - 31,
Hour : 0 - 23,
Minute : 0 - 59.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.2.1.7 |
xgs360026fSystemTimeManualDaylightSavingsBydatesToGet/Set the End time of By dates Daylight Savings.
The input format is 'Year-Month-Day Hour:Minute'.
ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 .
The value range:
Year : 2010 - 2090,
Mouth : 1 - 12,
Day : 1 - 31,
Hour : 0 - 23,
Minute : 0 - 59.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.2.1.8 |
xgs360026fSystemTimeManualDaylightSavingsRecurringDayFromGet/Set the Daylight Saving Time Day From.
0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.2.1.9 |
xgs360026fSystemTimeManualDaylightSavingsRecurringWeekFromGet/Set the Daylight Saving Time Week From.
1 : first week, 2, 3, 4, 5 : last weekrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.2.1.10 |
xgs360026fSystemTimeManualDaylightSavingsRecurringMonthFromGet/Set the Daylight Saving Time Month From.
1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun,
7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.2.1.11 |
xgs360026fSystemTimeManualDaylightSavingsRecurringTimeFromGet/Set the Start time of By dates Daylight Savings.
The input format is 'Hour:Minute'.
ex: 05:43.
The value range:
Hour : 0 - 23,
Minute : 0 - 59.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.2.1.12 |
xgs360026fSystemTimeManualDaylightSavingsRecurringDayToGet/Set the Daylight Saving Time Day To.
0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.2.1.13 |
xgs360026fSystemTimeManualDaylightSavingsRecurringWeekToGet/Set the Daylight Saving Time Week To.
1 : first week, 2, 3, 4, 5 : last weekrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.2.1.14 |
xgs360026fSystemTimeManualDaylightSavingsRecurringMonthToGet/Set the Daylight Saving Time Month To.
1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun,
7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.2.1.15 |
xgs360026fSystemTimeManualDaylightSavingsRecurringTimeToGet/Set the Start time of By dates Daylight Savings.
The input format is 'Hour:Minute'.
ex: 05:43.
The value range:
Hour : 0 - 23,
Minute : 0 - 59.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.2.1.16 |
xgs360026fSystemTimeNTP OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.2.2 |
xgs360026fSystemTimeNTPTable SEQUENCE OF XGS360026FSystemTimeNTPEntry .1.3.6.1.4.1.890.1.5.8.77.1.2.2.1 |
xgs360026fSystemTimeNTPEntry XGS360026FSystemTimeNTPEntry .1.3.6.1.4.1.890.1.5.8.77.1.2.2.1.1 |
xgs360026fSystemTimeNTPIndexThe index of the ntp entry. INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.2.2.1.1.1 |
xgs360026fSystemTimeNTPServerIPTypeDefault: 0,
0 : IPv4,
1 : IPv6.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.1.2.2.1.1.2 |
xgs360026fSystemTimeNTPServerGet/Set the NTP Time Server1. You can use the IP address or domain name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.2.2.1.1.3 |
xgs360026fSystemTimeNTPCurrentMode0: Empty
1: Active
2: Edit
3: Deleterw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.2.2.1.1.4 |
xgs360026fSystemAccount OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.3 |
xgs360026fSystemAccountUsers OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.3.1 |
xgs360026fSystemAccountUserCreatedefault: 0
0 : None (read only)
1 : Create a user accountrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.1.3.1.1 |
xgs360026fSystemAccountUsersTable SEQUENCE OF XGS360026FSystemAccountUsersEntry .1.3.6.1.4.1.890.1.5.8.77.1.3.1.2 |
xgs360026fSystemAccountUsersEntry XGS360026FSystemAccountUsersEntry .1.3.6.1.4.1.890.1.5.8.77.1.3.1.2.1 |
xgs360026fUserIndex INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.1.2.1.1 |
xgs360026fUserNamerw DisplayString .1.3.6.1.4.1.890.1.5.8.77.1.3.1.2.1.2 |
xgs360026fPasswordrw DisplayString .1.3.6.1.4.1.890.1.5.8.77.1.3.1.2.1.3 |
xgs360026fUserPrivilegeLeveldefault:1
User privilege level range : 1 - 15rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.1.2.1.4 |
xgs360026fAccountUserRowStatus1: active
2: notInservice
3: edit
4: destroy
5: undorw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.1.2.1.5 |
xgs360026fSystemAccountPrivilegeLevel OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.3.2 |
xgs360026fAccountPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.1 |
xgs360026fAggregationPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.2 |
xgs360026fDiagnosticsPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.3 |
xgs360026fEPSPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.5 |
xgs360026fERPSPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.6 |
xgs360026fETHLinkOAMPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.7 |
xgs360026fEVCPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.8 |
xgs360026fGARPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.10 |
xgs360026fGVRPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.11 |
xgs360026fIPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.12 |
xgs360026fIPMCSnoopingPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.13 |
xgs360026fLACPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.14 |
xgs360026fLLDPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.15 |
xgs360026fLLDPMEDPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.16 |
xgs360026fLoopProtectPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.17 |
xgs360026fMACTablePrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.18 |
xgs360026fMEPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.20 |
xgs360026fMRSTPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.21 |
xgs360026fMVRPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.22 |
xgs360026fMaintenancePrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.24 |
xgs360026fMirroringPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.25 |
xgs360026fPTPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.26 |
xgs360026fPortsPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.27 |
xgs360026fPrivateVLANsPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.28 |
xgs360026fQoSPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.29 |
xgs360026fSMTPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.31 |
xgs360026fSNMPPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.32 |
xgs360026fSecurityPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.33 |
xgs360026fSpanningTreePrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.35 |
xgs360026fSystemPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.36 |
xgs360026fTrapEventPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.37 |
xgs360026fVCLPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.39 |
xgs360026fVLANTranslationPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.40 |
xgs360026fVLANsPrivilegeLevelDefault:10, Range : 1-15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.3.2.41 |
xgs360026fIP OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.4 |
xgs360026fIPv4 OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.4.1 |
xgs360026fIPv4Configured OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.4.1.1 |
xgs360026fIpv4DHCPClientdefault:0
0: disable
1: enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.1.4.1.1.1 |
xgs360026fIPv4Addressrw IpAddress .1.3.6.1.4.1.890.1.5.8.77.1.4.1.1.2 |
xgs360026fIPv4Maskrw IpAddress .1.3.6.1.4.1.890.1.5.8.77.1.4.1.1.3 |
xgs360026fIPv4Routerrw IpAddress .1.3.6.1.4.1.890.1.5.8.77.1.4.1.1.4 |
xgs360026fIPv4VLANIddefault:1rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.4.1.1.5 |
xgs360026fIPv4DNSServerrw IpAddress .1.3.6.1.4.1.890.1.5.8.77.1.4.1.1.6 |
xgs360026fIPv4DNSProxyrw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.1.4.1.1.7 |
xgs360026fIPv4Current OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.4.1.2 |
xgs360026fIpv4CurrentDHCPClientdefault:0
0: none (for read)
1: renewrw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.1.4.1.2.1 |
xgs360026fIPv4CurrentAddressro IpAddress .1.3.6.1.4.1.890.1.5.8.77.1.4.1.2.2 |
xgs360026fIPv4CurrentMaskro IpAddress .1.3.6.1.4.1.890.1.5.8.77.1.4.1.2.3 |
xgs360026fIPv4CurrentRouterro IpAddress .1.3.6.1.4.1.890.1.5.8.77.1.4.1.2.4 |
xgs360026fIPv4CurrentVLANIddefault:1ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.4.1.2.5 |
xgs360026fIPv4CurrentDNSServerro IpAddress .1.3.6.1.4.1.890.1.5.8.77.1.4.1.2.6 |
xgs360026fIPv6 OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.4.2 |
xgs360026fIPv6Configured OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.4.2.1 |
xgs360026fIpv6AutoConfigurationdefault:0
0: disable
1: enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.1.4.2.1.1 |
xgs360026fIpv6Addressrw DisplayString .1.3.6.1.4.1.890.1.5.8.77.1.4.2.1.2 |
xgs360026fIpv6Prefixdefault: 96rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.4.2.1.3 |
xgs360026fIpv6Routerrw DisplayString .1.3.6.1.4.1.890.1.5.8.77.1.4.2.1.4 |
xgs360026fIPv6Current OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.4.2.2 |
xgs360026fIpv6CurrentAutoConfigurationdefault:0
0: disable
1: enablero INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.1.4.2.2.1 |
xgs360026fIpv6CurrentAddressro DisplayString .1.3.6.1.4.1.890.1.5.8.77.1.4.2.2.2 |
xgs360026fIpv6CurrentLinkLocalAddressro DisplayString .1.3.6.1.4.1.890.1.5.8.77.1.4.2.2.3 |
xgs360026fIpv6CurrentPrefixro INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.4.2.2.4 |
xgs360026fIpv6CurrentRouterro DisplayString .1.3.6.1.4.1.890.1.5.8.77.1.4.2.2.5 |
xgs360026fSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.5 |
xgs360026fSyslogConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.5.1 |
xgs360026fServerModedefault: 0
0: disable
1: enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.1.5.1.1 |
xgs360026fServerAddress1rw IpAddress .1.3.6.1.4.1.890.1.5.8.77.1.5.1.2 |
xgs360026fServerAddress2rw IpAddress .1.3.6.1.4.1.890.1.5.8.77.1.5.1.3 |
xgs360026fSyslogLeveldefault: 6 (Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.5.1.4 |
xgs360026fSyslogDetailedInfo OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.5.2 |
xgs360026fSyslogDetailedInfoCleardefault: 0
0 : None (read only)
1 : Clear Syslogrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.1.5.2.1 |
xgs360026fSyslogDetailedInfoTable SEQUENCE OF XGS360026FSyslogDetailedInfoEntry .1.3.6.1.4.1.890.1.5.8.77.1.5.2.2 |
xgs360026fSyslogDetailedInfoEntry XGS360026FSyslogDetailedInfoEntry .1.3.6.1.4.1.890.1.5.8.77.1.5.2.2.1 |
xgs360026fSyslogDetailedInfoIndex INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.5.2.2.1.1 |
xgs360026fSyslogDetailedInfoLevelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.5.2.2.1.2 |
xgs360026fSyslogDetailedInfoTimero DisplayString .1.3.6.1.4.1.890.1.5.8.77.1.5.2.2.1.3 |
xgs360026fSyslogDetailedInfoMessagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.5.2.2.1.4 |
xgs360026fSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.6 |
xgs360026fSnmpConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.1.6.1 |
xgs360026fGetCommunityGet/Set the get-community of the SNMP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.6.1.1 |
xgs360026fSetCommunityModeGet/Set the set-community mode of the SNMP.
default : 1, 0: disable, 1: enable.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.1.6.1.2 |
xgs360026fSetCommunityGet/Set the set-community of the SNMP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.6.1.3 |
xgs360026fTrapHostConfTableA list of trap host entry. The numbers of entries are given by the value of xgs360026fTrapHostConfNumber. SEQUENCE OF XGS360026FTrapHostConfEntry .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4 |
xgs360026fTrapHostConfEntryThis is the entry information for trap host. XGS360026FTrapHostConfEntry .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1 |
xgs360026fTrapHostConfIndexThe index of the trap host entry. INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.1 |
xgs360026fTrapHostConfVersionThe version of the Trap PDU. Version : 2(SNMPv2c), 3(SNMPv3)rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.2 |
xgs360026fTrapHostConfIPTypeServer IP Type. Default: 4,
4 : IPv4,
6 : IPv6.rw INTEGER(4|6) .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.3 |
xgs360026fTrapHostConfIPThis is the IP of the trap host.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.4 |
xgs360026fTrapHostConfPortThis is the receiving-port number of the trap host.
range : 1 - 65535.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.5 |
xgs360026fTrapHostConfCommunityThe community/security name for the trap PDU.rw DisplayString .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.6 |
xgs360026fTrapHostConfSeverityLevelThe Severity Level.
0 : Emerg, 1 : Alert, 2 : Crit, 3 : Error, 4 : Warning, 5 : Notice, 6 : Info, 7 : Debug.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.7 |
xgs360026fTrapHostConfSecurityLevelThe Security Level, NoAuthNoPriv, AuthNoPriv, and AuthPriv.
1 : NoAuthNoPriv, 2 : AuthNoPriv, 3 : AuthPriv.
Privacy protocol will be configured as 'DES' automatically if security level is 3(AuthPriv).rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.8 |
xgs360026fTrapHostConfAuthPtcAuthentication Protocol, there are SHA and MD5 supported presently.
1 : MD5, 2 : SHA.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.9 |
xgs360026fTrapHostConfAuthPasswordAuthentication Password, is used for authenticating. The return value is always '********'.
If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters.
If the authentication protocol is SHA, the length of password should be 8 ~ 40 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.10 |
xgs360026fTrapHostConfPrivPtcThis is the Privacy Protocol, which is used in AuthPriv. Only supports DES.
An empty string will be returned if the security level is not 3(AuthPriv).
1 : DES.rw INTEGER(1) .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.11 |
xgs360026fTrapHostConfPrivPasswordThe password is Privacy Key. The return value is always '********'. This Key
must be more than 8 characters, and less than 32 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.12 |
xgs360026fTrapHostConfCurrentMode0:Empty, 1:Active mode, 2:Edit mode, 3:Delete.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.1.6.1.4.1.13 |
xgs360026fConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2 |
xgs360026fPort OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.1 |
xgs360026fPortConfigurationTableShow port configurations. SEQUENCE OF XGS360026FPortConfigurationEntry .1.3.6.1.4.1.890.1.5.8.77.2.1.1 |
xgs360026fPortConfigurationEntry XGS360026FPortConfigurationEntry .1.3.6.1.4.1.890.1.5.8.77.2.1.1.1 |
xgs360026fPortConfPortport, range : 1 - port number. INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.1 |
xgs360026fPortConfPortMediaShow port media.ro DisplayString .1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.2 |
xgs360026fPortConfLinkThe current link state.ro DisplayString .1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.3 |
xgs360026fPortConfCurrentSpeedThe current link speed of the port.ro DisplayString .1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.4 |
xgs360026fPortConfSpeeddefault: 1,
0: disable state,
1: auto,
2: 10 Half,
3: 10 Full,
4: 100 Half,
5: 100 Full,
6: 1G full,
only 'Dual Media' port have 7-11 option.
Dual Media port default: 7,
7: SFP_Auto_AMS,
8: 100FX_AMS,
9: 1000X_AMS,
10: 100FX,
11: 1000Xrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.5 |
xgs360026fPortConfCurrentFlowControlRx0: disable
1: enable
2: not support.ro INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.6 |
xgs360026fPortConfCurrentFlowControlTx0: disable
1: enable
2: not support.ro INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.7 |
xgs360026fPortConfFlowControldefault: 0,
0: disable
1: enable
2: not support.rw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.8 |
xgs360026fPortConfMaxFrameSizedefault: 9600 , range : 1518 - 9600rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.9 |
xgs360026fPortConfExcessiveCollisionModedefault: 0,
Excessive Collision Mode :
0: Discard,
1: Restart,
2: not support.rw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.10 |
xgs360026fPortConfPowerControldefault: 0,
PowerControl :
0: disable,
1: Actiphy,
2: Dynamic (perfectReach),
3: Enable,
4: not support.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.11 |
xgs360026fPortConfDescriptionInterface specific description.
Up to 47 characters describing this interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.1.1.12 |
xgs360026fPortTrafficStatisticsTable SEQUENCE OF XGS360026FPortTrafficStatisticsEntry .1.3.6.1.4.1.890.1.5.8.77.2.1.2 |
xgs360026fPortTrafficStatisticsEntry XGS360026FPortTrafficStatisticsEntry .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1 |
xgs360026fPortTrafficStatisticsPort INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.1 |
xgs360026fPortTrafficStatisticsClearrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.2 |
xgs360026fPortTrafficRxPacketsro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.3 |
xgs360026fPortTrafficRxOctetsro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.4 |
xgs360026fPortTrafficRxUnicastro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.5 |
xgs360026fPortTrafficRxMulticastro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.6 |
xgs360026fPortTrafficRxBroadcastro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.7 |
xgs360026fPortTrafficRxPausero Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.8 |
xgs360026fPortTrafficRx64Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.9 |
xgs360026fPortTrafficRx65to127Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.10 |
xgs360026fPortTrafficRx128to255Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.11 |
xgs360026fPortTrafficRx256to511Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.12 |
xgs360026fPortTrafficRx512to1023Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.13 |
xgs360026fPortTrafficRx1024to1526Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.14 |
xgs360026fPortTrafficRxExceecd1527Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.15 |
xgs360026fPortTrafficRxQ0ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.16 |
xgs360026fPortTrafficRxQ1ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.17 |
xgs360026fPortTrafficRxQ2ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.18 |
xgs360026fPortTrafficRxQ3ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.19 |
xgs360026fPortTrafficRxQ4ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.20 |
xgs360026fPortTrafficRxQ5ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.21 |
xgs360026fPortTrafficRxQ6ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.22 |
xgs360026fPortTrafficRxQ7ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.23 |
xgs360026fPortTrafficRxDropsro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.24 |
xgs360026fPortTrafficRxCRCorAlignmentro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.25 |
xgs360026fPortTrafficRxUndersizero Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.26 |
xgs360026fPortTrafficRxOversizero Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.27 |
xgs360026fPortTrafficRxFragmentsro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.28 |
xgs360026fPortTrafficRxJabberro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.29 |
xgs360026fPortTrafficRxFilteredro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.30 |
xgs360026fPortTrafficTxPacketsro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.31 |
xgs360026fPortTrafficTxOctetsro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.32 |
xgs360026fPortTrafficTxUnicastro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.33 |
xgs360026fPortTrafficTxMulticastro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.34 |
xgs360026fPortTrafficTxBroadcastro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.35 |
xgs360026fPortTrafficTxPausero Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.36 |
xgs360026fPortTrafficTx64Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.37 |
xgs360026fPortTrafficTx65to127Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.38 |
xgs360026fPortTrafficTx128to255Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.39 |
xgs360026fPortTrafficTx256to511Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.40 |
xgs360026fPortTrafficTx512to1023Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.41 |
xgs360026fPortTrafficTx1024to1526Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.42 |
xgs360026fPortTrafficTxExceecd1527Bytesro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.43 |
xgs360026fPortTrafficTxQ0ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.44 |
xgs360026fPortTrafficTxQ1ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.45 |
xgs360026fPortTrafficTxQ2ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.46 |
xgs360026fPortTrafficTxQ3ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.47 |
xgs360026fPortTrafficTxQ4ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.48 |
xgs360026fPortTrafficTxQ5ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.49 |
xgs360026fPortTrafficTxQ6ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.50 |
xgs360026fPortTrafficTxQ7ro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.51 |
xgs360026fPortTrafficTxDropsro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.52 |
xgs360026fPortTrafficTxLateOrExcCollro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.2.1.53 |
xgs360026fPortQoSStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.1.3 |
xgs360026fPortQoSStatisticsCleardefault: 0
0: none
1: clearro INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.1.3.1 |
xgs360026fPortQoSStatisticsTable SEQUENCE OF XGS360026FPortQoSStatisticsEntry .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2 |
xgs360026fPortQoSStatisticsEntry XGS360026FPortQoSStatisticsEntry .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1 |
xgs360026fPortQoSStatisticsPort INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.1 |
xgs360026fPortQoSQ0Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.2 |
xgs360026fPortQoSQ0Txro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.3 |
xgs360026fPortQoSQ1Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.4 |
xgs360026fPortQoSQ1Txro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.5 |
xgs360026fPortQoSQ2Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.6 |
xgs360026fPortQoSQ2Txro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.7 |
xgs360026fPortQoSQ3Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.8 |
xgs360026fPortQoSQ3Txro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.9 |
xgs360026fPortQoSQ4Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.10 |
xgs360026fPortQoSQ4Txro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.11 |
xgs360026fPortQoSQ5Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.12 |
xgs360026fPortQoSQ5Txro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.13 |
xgs360026fPortQoSQ6Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.14 |
xgs360026fPortQoSQ6Txro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.15 |
xgs360026fPortQoSQ7Rxro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.16 |
xgs360026fPortQoSQ7Txro Counter64 .1.3.6.1.4.1.890.1.5.8.77.2.1.3.2.1.17 |
xgs360026fSFPInfoTable SEQUENCE OF XGS360026FSFPInfoEntry .1.3.6.1.4.1.890.1.5.8.77.2.1.4 |
xgs360026fSFPInfoEntry XGS360026FSFPInfoEntry .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1 |
xgs360026fSFPInfoIndex INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.1 |
xgs360026fSFPInfoPortro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.2 |
xgs360026fSFPConnectorTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.3 |
xgs360026fSFPFiberTypero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.4 |
xgs360026fSFPTxCentralWavelengthro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.5 |
xgs360026fSFPBaudRatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.6 |
xgs360026fSFPVendorOUIro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.7 |
xgs360026fSFPVendorNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.8 |
xgs360026fSFPVendorPNro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.9 |
xgs360026fSFPVendorRevro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.10 |
xgs360026fSFPVendorSNro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.11 |
xgs360026fSFPDateCodero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.12 |
xgs360026fSFPTemperaturero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.13 |
xgs360026fSFPVccro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.14 |
xgs360026fSFPMon1Biasro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.15 |
xgs360026fSFPMon2TxPWRro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.16 |
xgs360026fSFPMon3RxPWRro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.1.4.1.17 |
xgs360026fGARP OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.3 |
xgs360026fGARPConfTable SEQUENCE OF XGS360026FGARPConfEntry .1.3.6.1.4.1.890.1.5.8.77.2.3.1 |
xgs360026fGARPConfEntry XGS360026FGARPConfEntry .1.3.6.1.4.1.890.1.5.8.77.2.3.1.1 |
xgs360026fGARPConfPort INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.3.1.1.1 |
xgs360026fGARPJoinTimerdefault: 200, range : 200 - 1000rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.3.1.1.2 |
xgs360026fGARPLeaveTimerdefault: 600 , range : 600 - 3000rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.3.1.1.3 |
xgs360026fGARPLeaveAllTimerdefault: 10000, range : 10000 - 50000rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.3.1.1.4 |
xgs360026fGARPApplicantiondefault: 1
1: GVRPrw INTEGER(1) .1.3.6.1.4.1.890.1.5.8.77.2.3.1.1.5 |
xgs360026fGARPAttributeTypedefault: 1
1: VLANrw INTEGER(1) .1.3.6.1.4.1.890.1.5.8.77.2.3.1.1.6 |
xgs360026fGARPApplicantdefault: 0
0: normal-participant
1: non-participantrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.3.1.1.7 |
xgs360026fGARPStatisticsTableShow the basic GARP port statistics. SEQUENCE OF XGS360026FGARPStatisticsEntry .1.3.6.1.4.1.890.1.5.8.77.2.3.2 |
xgs360026fGARPStatisticsEntry XGS360026FGARPStatisticsEntry .1.3.6.1.4.1.890.1.5.8.77.2.3.2.1 |
xgs360026fGARPStatisticsPortport, range : 1 - port number. INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.3.2.1.1 |
xgs360026fGARPStatisticsPeerMACPeer MAC is MAC address of the neighbour Switch from with GARP frame is received.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.3.2.1.2 |
xgs360026fGARPStatisticsFailedCountexplain Failed count here.ro Counter32 .1.3.6.1.4.1.890.1.5.8.77.2.3.2.1.3 |
xgs360026fGVRP OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.4 |
xgs360026fGVRPConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.4.1 |
xgs360026fGVRPModedefault: 0,
0: disable,
1: enable.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.4.1.1 |
xgs360026fGVRPConfTable SEQUENCE OF XGS360026FGVRPConfEntry .1.3.6.1.4.1.890.1.5.8.77.2.4.1.2 |
xgs360026fGVRPConfEntry XGS360026FGVRPConfEntry .1.3.6.1.4.1.890.1.5.8.77.2.4.1.2.1 |
xgs360026fGVRPConfPort INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.4.1.2.1.1 |
xgs360026fGVRPConfPortModedefault: 0
1: enable
0: disablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.4.1.2.1.2 |
xgs360026fGVRPConfPortRRoledefault: 0
1: enable
0: disablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.4.1.2.1.3 |
xgs360026fGVRPStatisticsTable SEQUENCE OF XGS360026FGVRPStatisticsEntry .1.3.6.1.4.1.890.1.5.8.77.2.4.2 |
xgs360026fGVRPStatisticsEntry XGS360026FGVRPStatisticsEntry .1.3.6.1.4.1.890.1.5.8.77.2.4.2.1 |
xgs360026fGVRPStatisticsPort INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.4.2.1.1 |
xgs360026fGVRPStatisticsJoinTxCntro Counter32 .1.3.6.1.4.1.890.1.5.8.77.2.4.2.1.2 |
xgs360026fGVRPStatisticsLeaveTxCntro Counter32 .1.3.6.1.4.1.890.1.5.8.77.2.4.2.1.3 |
xgs360026fThermalProtection OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.5 |
xgs360026fPriority0Temperaturedefault: 255, range : 0 - 255rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.5.1 |
xgs360026fPriority1Temperaturedefault: 255, range : 0 - 255rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.5.2 |
xgs360026fPriority2Temperaturedefault: 255, range : 0 - 255rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.5.3 |
xgs360026fPriority3Temperaturedefault: 255, range : 0 - 255rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.5.4 |
xgs360026fThermalProtectionTable SEQUENCE OF XGS360026FThermalProtectionEntry .1.3.6.1.4.1.890.1.5.8.77.2.5.5 |
xgs360026fThermalProtectionEntry XGS360026FThermalProtectionEntry .1.3.6.1.4.1.890.1.5.8.77.2.5.5.1 |
xgs360026fThermalProtectionPort INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.5.5.1.1 |
xgs360026fThermalProtectionPortTemperaturero INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.5.5.1.2 |
xgs360026fThermalProtectionPortPrioritydefault: 0, range : 0 - 3rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.5.5.1.3 |
xgs360026fThermalProtectionPortStatusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.5.5.1.4 |
xgs360026fMirroring OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.6 |
xgs360026fPortToMirrorOndefault: 0
0: disable,
range : 1 - port number.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.6.1 |
xgs360026fMirrorTable SEQUENCE OF XGS360026FMirrorEntry .1.3.6.1.4.1.890.1.5.8.77.2.6.2 |
xgs360026fMirrorEntry XGS360026FMirrorEntry .1.3.6.1.4.1.890.1.5.8.77.2.6.2.1 |
xgs360026fMirrorPort INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.6.2.1.1 |
xgs360026fMirrorModedefault: 0
0: disable
1: enable
2: rx only
3: tx only
Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignoredrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.6.2.1.2 |
xgs360026fTrapEventSeverity OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.7 |
xgs360026fTrapEventSeverityACLdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.1 |
xgs360026fTrapEventSeverityACLLogdefault: 7(Debug)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.2 |
xgs360026fTrapEventSeverityAccessMgmtdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.3 |
xgs360026fTrapEventSeverityAuthFaileddefault: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.4 |
xgs360026fTrapEventSeverityColdStartdefault: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.5 |
xgs360026fTrapEventSeverityConfigInfodefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.6 |
xgs360026fTrapEventSeverityFirmwareUpgradedefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.7 |
xgs360026fTrapEventSeverityImportExportdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.8 |
xgs360026fTrapEventSeverityLACPdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.9 |
xgs360026fTrapEventSeverityLinkStatusdefault: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.10 |
xgs360026fTrapEventSeverityLogindefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.11 |
xgs360026fTrapEventSeverityLogoutdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.12 |
xgs360026fTrapEventSeverityLoopProtectdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.13 |
xgs360026fTrapEventSeverityMgmtIPChangedefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.14 |
xgs360026fTrapEventSeverityModuleChangedefault: 5(Notice)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.15 |
xgs360026fTrapEventSeverityNASdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.16 |
xgs360026fTrapEventSeverityPasswdChangedefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.17 |
xgs360026fTrapEventSeverityPortSecuritydefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.18 |
xgs360026fTrapEventSeverityThermalProtectdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.19 |
xgs360026fTrapEventSeverityVLANdefault: 6(Info)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.20 |
xgs360026fTrapEventSeverityWarmStartdefault: 4(Warning)
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.7.21 |
xgs360026fSMTP OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.8 |
xgs360026fSMTPMailServerUp to 47 characters describing email server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.8.1 |
xgs360026fSMTPUserNameUp to 47 characters describing user name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.8.2 |
xgs360026fSMTPPasswordUp to 47 characters describing password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.8.3 |
xgs360026fSMTPServeriryLeveldefault: 6
0: Emergency
1: Alert
2: Critical
3: Error
4: Warning
5: Notice
6: Info
7: Debugrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.8.4 |
xgs360026fSMTPSenderUp to 47 characters describing sender.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.8.5 |
xgs360026fSMTPReturnPathUp to 47 characters describing return path.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.8.6 |
xgs360026fSMTPEmailAddress1Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.8.7 |
xgs360026fSMTPEmailAddress2Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.8.8 |
xgs360026fSMTPEmailAddress3Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.8.9 |
xgs360026fSMTPEmailAddress4Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.8.10 |
xgs360026fSMTPEmailAddress5Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.8.11 |
xgs360026fSMTPEmailAddress6Up to 47 characters describing mail address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.8.12 |
xgs360026fACL OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.9 |
xgs360026fACLPortsConfTable SEQUENCE OF XGS360026FACLPortsConfEntry .1.3.6.1.4.1.890.1.5.8.77.2.9.1 |
xgs360026fACLPortsConfEntry XGS360026FACLPortsConfEntry .1.3.6.1.4.1.890.1.5.8.77.2.9.1.1 |
xgs360026fACLPortsConfPort INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.1.1.1 |
xgs360026fACLPortsConfPolicyIDdefault: 0, range : 0 - 255rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.1.1.2 |
xgs360026fACLPortsConfActiondefault: 1,
0: Deny
1: Permitrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.9.1.1.3 |
xgs360026fACLPortsConfRateLimiterIDdefault: 0,
0: Disable
range : 0 - 16rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.1.1.4 |
xgs360026fACLPortsConfPortRedirectdefault: 0
0: Disable
range : 0 - end port numberrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.1.1.5 |
xgs360026fACLPortsConfLoggingdefault: 0
0: Disable
1: Enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.9.1.1.7 |
xgs360026fACLPortsConfShutdowndefault: 0
0: Disable
1: Enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.9.1.1.8 |
xgs360026fACLPortsConfStatedefault: 1
0: Disable
1: Enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.9.1.1.9 |
xgs360026fACLPortsConfCounterCounts the number of frames that match this ACE.ro Counter32 .1.3.6.1.4.1.890.1.5.8.77.2.9.1.1.10 |
xgs360026fACLRateLimiterTable SEQUENCE OF XGS360026FACLRateLimiterEntry .1.3.6.1.4.1.890.1.5.8.77.2.9.2 |
xgs360026fACLRateLimiterEntry XGS360026FACLRateLimiterEntry .1.3.6.1.4.1.890.1.5.8.77.2.9.2.1 |
xgs360026fACLRateLimiterIDRate Limiter ID.
range : 1-16 INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.2.1.1 |
xgs360026fACLRateLimiterRatedefault: 1,
range : <0-3276700> ppsrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.2.1.3 |
xgs360026fACLACE OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.9.3 |
xgs360026fACLACECreatedefault: 0
0 : None (read only)
1 : Create an ACE entryrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.1 |
xgs360026fACLACETableCreate ACL ACE entry. SEQUENCE OF XGS360026FACLACEEntry .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2 |
xgs360026fACLACEEntry XGS360026FACLACEEntry .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1 |
xgs360026fACLACEIndex INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.1 |
xgs360026fACLACEIDIf the ACE ID is specified and an entry with this ACE ID
already exists, the ACE will be modified. Otherwise, a
new ACE will be added.
range : 1 - 256.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.2 |
xgs360026fACLACENextIDIf the next ACE ID is non zero, the ACE will be placed
before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.3 |
xgs360026fACLACEIngressPortIndicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.Format: 1,3,6.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.4 |
xgs360026fACLACEPortPolicyNumberpolicy value.
range : 0 - 255.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.5 |
xgs360026fACLACEPortPolicyBitmaskpolicy bitmask.
range : 0 - 255(0xff).rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.6 |
xgs360026fACLACEFrameType0: any,
1: arp,
2: etype,
3: icmp,
4: ipv4,
5: tcp,
6: udp.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.7 |
xgs360026fACLACEActiondefault: 1,
0: Deny
1: Permitrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.8 |
xgs360026fACLACEDenyPortRedirectFrames that hit the ACE are redirected to the port number specified here.
Disabled: indicates that the port redirect operation is disabled.
Port Format: 1,3,6.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.9 |
xgs360026fACLACELoggingdefault: 0,
0: disable - Frames matching the ACE are not logged.
1: enable - Frames matching the ACE are stored in the system log.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.10 |
xgs360026fACLACERateLimiterdefault: 0,
0: Disable
range : 0 - 16rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.12 |
xgs360026fACLACEShutdowndefault: 0,
0: disable - Port shut down is disabled for the AC.
1: enable - If a frame matches the ACE, the ingress port will be disabled.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.13 |
xgs360026fACLACEVLANTagPrioritySpecify the tag priority for this ACE.
The tag priority can't be set when 802.1Q Tagged is disabled
default: 8,
8: Any,
range : 0 - 8rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.15 |
xgs360026fACLACEVLANVIDSpecify the VLAN ID filter for this ACE.
The vid can't be set when 802.1Q Tagged is disabled.
default: 0,
0: Any - No VLAN ID filter is specified.
range : 0 - 4094rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.16 |
xgs360026fACLACEEtherType0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6).
range : 0 or 1536(0x0600)- 65535(0xffff).rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.17 |
xgs360026fACLACESMACConfigure source MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this source MAC address value.
Any: Don't care.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.18 |
xgs360026fACLACEDMACTypeDMAC Type.
default: 0,
0: Any - Don't care.
1: Broadcast - Frame must be broadcast.
2: Unicast - Frame must be unicast.
3: Multicast - Frame must be multicast.
4: mac address
range : 0 - 4rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.19 |
xgs360026fACLACEDMACConfigure destination MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this destination MAC address value.
Any: Don't care.
Broadcast: Frame must be broadcast.
Unicast: Frame must be unicast.
Multicast: Frame must be multicast.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.20 |
xgs360026fACLACEArpOpcodeConfigure ARP opcode for this ACE.
default: 0,
0: Any - Don't care.
1: arp.
2: rarp.
3: other.
4: No data.
range : 0 - 3rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.21 |
xgs360026fACLACEArpFlagsRequestReplySpecify the available ARP/RARP opcode (OP) flag for this ACE.
default: 2,
0: Frame must have ARP Reply or RARP Reply OP flag.
1: Frame must have ARP Request or RARP Request OP flag set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.22 |
xgs360026fACLACEArpFlagsArpSmacSpecify whether frames can hit the action according to their sender hardware address field (SHA) settings.
default: 2,
0: ARP frames where SHA is not equal to the SMAC address.
1: ARP frames where SHA is equal to the SMAC address.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.23 |
xgs360026fACLACEArpFlagsRarpDmacSpecify whether frames can hit the action according to their target hardware address field (THA) settings.
default: 2,
0: RARP frames where THA is not equal to the DMAC address.
1: RARP frames where THA is equal to the DMAC address.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.24 |
xgs360026fACLACEArpFlagsLengthSpecify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and
protocol address length (PLN) settings.
default: 2,
0: ARP/RARP frames where the HLN is not equal to Ethernet(0x06) or the (PLN) is not equal to IPv4(0x04).
1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4(0x04).
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.25 |
xgs360026fACLACEArpFlagsIpSpecify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings.
default: 2,
0: ARP/RARP frames where the HLD is not equal to Ethernet(1).
1: ARP/RARP frames where the HLD is equal to Ethernet(1).
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.26 |
xgs360026fACLACEArpFlagsEthernetSpecify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings.
default: 2,
0: ARP/RARP frames where the PRO is not equal to IP\n(0x800).
1: ARP/RARP frames where the PRO is equal to IP(0x800).
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.27 |
xgs360026fACLACESIPTypeConfigure source IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.28 |
xgs360026fACLACESIPIPAddressA frame that hits this ACE matches this source IP address value.rw IpAddress .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.29 |
xgs360026fACLACESIPNetworkPrefixNetwork prefix.
default: 32,
0: No data.
range : 1 - 32rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.30 |
xgs360026fACLACEDIPTypeConfigure destination IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.32 |
xgs360026fACLACEDIPIPAddressA frame that hits this ACE matches this destination IP address value.rw IpAddress .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.33 |
xgs360026fACLACEDIPNetworkPrefixNetwork prefix.
default: 32,
0: No data.
range : 1 - 32rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.34 |
xgs360026fACLACEIPProtocolConfigure IP protocol for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.36 |
xgs360026fACLACEIPFlagsTTLConfigure IP Time-to-Live flags for this ACE.
default: 2,
0: IPv4 frames with a Time-to-Live field is equal to zero.
1: IPv4 frames with a Time-to-Live field greater than zero.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.37 |
xgs360026fACLACEIPFlagsOptionsConfigure IP options flag for this ACE.
default: 2,
0: IPv4 frames where the options flag is unset.
1: IPv4 frames where the options flag is set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.38 |
xgs360026fACLACEIPFlagsFragmentConfigure IP fragment offset flags for this ACE.
default: 2,
0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero.
1: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.39 |
xgs360026fACLACEICMPTypeConfigure ICMP type for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.40 |
xgs360026fACLACEICMPCodeConfigure ICMP code for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.41 |
xgs360026fACLACESourcePortMinConfigure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.42 |
xgs360026fACLACESourcePortMaxConfigure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.43 |
xgs360026fACLACEDestPortMinConfigure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.44 |
xgs360026fACLACEDestPortMaxConfigure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.45 |
xgs360026fACLACETCPFlagsFinConfigure TCP (FIN) flags for this ACE.
default: 2,
0: TCP frames where the FIN field is unset.
1: TCP frames where the FIN field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.46 |
xgs360026fACLACETCPFlagsSynConfigure TCP (SYN) flags for this ACE.
default: 2,
0: TCP frames where the SYN field is unset.
1: TCP frames where the SYN field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.47 |
xgs360026fACLACETCPFlagsRstConfigure TCP (RST) flags for this ACE.
default: 2,
0: TCP frames where the RST field is unset.
1: TCP frames where the RST field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.48 |
xgs360026fACLACETCPFlagsPshConfigure TCP (PSH) flags for this ACE.
default: 2,
0: TCP frames where the PSH field is unset.
1: TCP frames where the PSH field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.49 |
xgs360026fACLACETCPFlagsAckConfigure TCP (ACK) flags for this ACE.
default: 2,
0: TCP frames where the ACK field is unset.
1: TCP frames where the ACK field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.50 |
xgs360026fACLACETCPFlagsUrgConfigure TCP (URG) flags for this ACE.
default: 2,
0: TCP frames where the URG field is unset.
1: TCP frames where the URG field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.51 |
xgs360026fACLACERowStatus1: active
2: notInservice
4: destroy
5: undorw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.2.1.66 |
xgs360026fACLACECleardefault: 0
0 : No action
1 : Clear all ACL counters.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.3 |
xgs360026fACLACEMoveACEIDMove ACE,
default: 0
ACE ID must be exist.
range : 1 - 256.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.4 |
xgs360026fACLACEMoveNextACEIDMove ACE,
default: 0
If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.5 |
xgs360026fACLACEStatusTableACL ACE Status entry. SEQUENCE OF XGS360026FACLACEStatusEntry .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6 |
xgs360026fACLACEStatusEntry XGS360026FACLACEStatusEntry .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1 |
xgs360026fACLACEStatusIndex INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.1 |
xgs360026fACLACEStatusUserIndicates the ACL user.
S : Static.
IPMG : IP Management.
IPSG : IP Source Guard.
IPMC : IPMC.
ARPI : Arp Inspection.
UPnP : UPnP.
DHCP : DHCP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.2 |
xgs360026fACLACEStatusIDACE ID.
range : 1 - 256.ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.3 |
xgs360026fACLACEStatusIngressPortIndicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.4 |
xgs360026fACLACEStatusFrameTypeIndicates the frame type of the ACE.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.5 |
xgs360026fACLACEStatusActionIndicates the forwarding action of the ACE.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.6 |
xgs360026fACLACEStatusRateLimiterIndicates the rate limiter number of the ACE.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.7 |
xgs360026fACLACEStatusPortCopyIndicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.8 |
xgs360026fACLACEStatusMirrorSpecify the mirror operation of this port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.9 |
xgs360026fACLACEStatusCPUForward packet that matched the specific ACE to CPU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.10 |
xgs360026fACLACEStatusCounterThe counter indicates the number of times the ACE was hit by a frame.ro Counter32 .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.11 |
xgs360026fACLACEStatusConflictIndicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.9.3.6.1.12 |
xgs360026fERPS OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.10 |
xgs360026fERPSConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.10.1 |
xgs360026fERPSConfCreatedefault: 0
0 : None (read only)
1 : Create an ERPS entryrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.10.1.1 |
xgs360026fERPSConfTableCreate one ERPS group. SEQUENCE OF XGS360026FERPSConfEntry .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2 |
xgs360026fERPSConfEntry XGS360026FERPSConfEntry .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1 |
xgs360026fERPSConfIndex INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.1 |
xgs360026fERPSConfERPSIDProtection group ID.
range : 1 - 64.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.2 |
xgs360026fERPSConfPort0East port of the switch in the ring.
range : 1 - 26.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.3 |
xgs360026fERPSConfPort1West port of the switch in the Ring.
As interconnected sub-ring will have only one ring port, W port is configured as 0 for interconnected sub-ring.
0: in this field indicates that no west port is associated with this instance.
range : 0 - 26.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.4 |
xgs360026fERPSConfPort0SFMEPThe East Signal Fail reporting MEP.
range : 1 - 32.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.5 |
xgs360026fERPSConfPort1SFMEPThe West Signal Fail reporting MEP. As only one SF MEP is associated with interconnected sub-ring without virtual channel,
it is configured as 0 for such ring instances. 0: in this field indicates that no west SF MEP is associated with this instance.
range : 0 - 32.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.6 |
xgs360026fERPSConfPort0APSMEPThe East APS PDU handling MEP.
range : 1 - 32.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.7 |
xgs360026fERPSConfPort1APSMEPThe West APS PDU handling MEP. As only one APS MEP is associated with interconnected sub-ring without virtual channel,
it is configured as 0 for such ring instances. 0: in this field indicates that no west APS MEP is associated with this instance.
range : 0 - 32.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.8 |
xgs360026fERPSConfRingTypeType of Protectiong ring. It can be either major ring or sub-ring.
default: 0,
0: Major
1: Subrw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.9 |
xgs360026fERPSConfInterconnectedNodeInterconnected Node indicates that the ring instance is interconnected.
default: 0,
0: No - indicates that the configured instance is not interconnected.
1: Yes - indicates it is an interconnected node for this instance.rw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.10 |
xgs360026fERPSConfVirtualChannelSub-rings can either have virtual channel or not on the interconnected node.
default: 0,
0: No - indicates, sub-ring doesn't have virtual channel.
1: Yes - indicates it is a sub-ring with virtual channel.rw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.11 |
xgs360026fERPSConfMajorRingIDMajor ring group ID for the interconnected sub-ring.
It is used to send topology change updates on major ring.
If ring is major, this value is same as the protection group ID of this ring.ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.12 |
xgs360026fERPSConfAlarmThere is an active alarm on the ERPS.ro DisplayString .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.13 |
xgs360026fERPSInstanceConfConfiguredDown: This ERPS is only created and has not yet been configured - is not active.
Up: This ERPS is configured - is active.ro DisplayString .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.14 |
xgs360026fERPSInstanceConfGuardTimeGuard timeout value to be used to prevent ring nodes from receiving outdated R-APS messages.
default : 500(ms).
range : 10 - 2000(ms).rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.15 |
xgs360026fERPSInstanceConfWTRTimeThe Wait To Restore timing value to be used in revertive switching.
default : 5(minutes).
range : 1 - 12(minutes).rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.16 |
xgs360026fERPSInstanceConfHoldOffTimeThe timing value to be used to make persistent check on Signal Fail before switching.
default : 0(seconds).
range : 0 - 10000(ms).rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.17 |
xgs360026fERPSInstanceConfVersionERPS version of a group.
default : 1.
0: v1
1: v2rw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.18 |
xgs360026fERPSInstanceConfRevertiveERPS revertibility of a group.
default : 1.
0: non-revertible
1: revertiblerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.19 |
xgs360026fERPSInstanceConfVLANconfigVID of the protected vlan.rw DisplayString .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.20 |
xgs360026fERPSConfRowStatus1: active
2: notInservice
3: edit
4: destroy
5: undorw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.10.1.2.1.21 |
xgs360026fMRSTP OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.11 |
xgs360026fMRSTPInstance OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.11.1 |
xgs360026fMRSTPInstanceConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.1 |
xgs360026fMRSTPInstanceConfGlobalStatedefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.1 |
xgs360026fMRSTPInstanceConfigurationTableshow instance configuration. SEQUENCE OF XGS360026FMRSTPInstanceConfigurationEntry .1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2 |
xgs360026fMRSTPInstanceConfigurationEntry XGS360026FMRSTPInstanceConfigurationEntry .1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1 |
xgs360026fMRSTPInstanceConfigurationInstancemrstp instance id, range : 1-12 INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1.1 |
xgs360026fMRSTPInstanceConfigurationStateMRSTP instance state. To really enable an MRSTP instance, the MRSTP Global State must also be enabled.
default: 0,
0: disable
1: enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1.2 |
xgs360026fMRSTPInstanceConfigurationVersionThe STP protocol version.
default: 1,
0: stp
1: rstprw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1.3 |
xgs360026fMRSTPInstanceConfigurationPriorityThe instance priority would be truncated to a multiple of 4096.
range : 0 - 61440, default: 32768.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1.4 |
xgs360026fMRSTPInstanceConfigurationHelloTimeThe interval between periodic transmissions of STP Configuration Messages by Designated Ports when the Bridge Instance is the Root Bridge.
range : 1 - 10 (seconds), and (HelloTime+1)*2 must be <= MaxAge.
default: 2.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1.5 |
xgs360026fMRSTPInstanceConfigurationMaxAgeThe maximum age of the information transmitted by the Bridge Instance when it is the Root Bridge.
range : 6 - 40 (seconds), and MaxAge must be <= (FwdDelay-1)*2.
default: 20.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1.6 |
xgs360026fMRSTPInstanceConfigurationFWDelayThe delay used by an MRSTP Bridge Instance to transit Root and Designated Ports to Forwarding
(used in STP compatible mode).
range : 4 - 30 (seconds), and MaxAge must be <= (FwdDelay-1)*2.
default: 15.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.1.2.1.7 |
xgs360026fMRSTPInstanceStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2 |
xgs360026fMRSTPInstanceStatusTableshow mrstp status of instance(s). SEQUENCE OF XGS360026FMRSTPInstanceStatusEntry .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1 |
xgs360026fMRSTPInstanceStatusEntry XGS360026FMRSTPInstanceStatusEntry .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1 |
xgs360026fMRSTPInstanceStatusInstancemrstp instance id, range : 1-12 INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.1 |
xgs360026fMRSTPInstanceStatusGlobalStateThe global state of MRSTP. If disabled,all instances won't be in an active state.
0: disable
1: enablero INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.2 |
xgs360026fMRSTPInstanceStatusInstanceConfigStateThe configured state of an MRSTP instance.
0: disable
1: enablero INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.3 |
xgs360026fMRSTPInstanceStatusInstanceCurrentStateThe operational state of an MRSTP Bridge Instance.
0: disable
1: enablero INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.4 |
xgs360026fMRSTPInstanceStatusBridgeIDThe Bridge ID of this Bridge instance.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.5 |
xgs360026fMRSTPInstanceStatusBridgePrioriryThe Bridge Priority of this Bridge instance. Value is shown in decimal.
range : 0 - 61440ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.6 |
xgs360026fMRSTPInstanceStatusRootIDThe Bridge ID of the currently elected root bridge.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.7 |
xgs360026fMRSTPInstanceStatusRootPriorityThe Bridge Priority of the currently elected root bridge. Value is shown in decimal.
range : 0 - 61440ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.8 |
xgs360026fMRSTPInstanceStatusRootPortThe switch port currently assigned the root port role.ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.9 |
xgs360026fMRSTPInstanceStatusRootPathCostFor the Root Bridge it is zero. For all other Bridges, it is the sum of the Port Path Costs on the least cost path to the Root Bridge.ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.10 |
xgs360026fMRSTPInstanceStatusCurrentMaxAgeThe Max Age inherited from the Root Bridge.
range : 6 - 40 (seconds)ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.11 |
xgs360026fMRSTPInstanceStatusCurrentForwardDelayThe Forward Delay time inherited from the Root Bridge.
range : 4 - 30 (seconds)ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.12 |
xgs360026fMRSTPInstanceStatusHelloTimeThe Hello Time inherited from the Root Bridge.
range : 1 - 10 (seconds)ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.13 |
xgs360026fMRSTPInstanceStatusTopologyChangeCountThe Topology Change Count since the MRSTP Bridge Instance is actually enabled.ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.14 |
xgs360026fMRSTPInstanceStatusTimeSinceLastTopologyChangeThe time since last Topology Change occurred.ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.1.2.1.1.15 |
xgs360026fMRSTPPort OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.11.2 |
xgs360026fMRSTPPortConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.11.2.1 |
xgs360026fMRSTPPortConfigurationTablecurrent MRSTP port configurations. SEQUENCE OF XGS360026FMRSTPPortConfigurationEntry .1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1 |
xgs360026fMRSTPPortConfigurationEntry XGS360026FMRSTPPortConfigurationEntry .1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1 |
xgs360026fMRSTPPortConfigurationPortThe switch port number of the MRSTP port. INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1.1 |
xgs360026fMRSTPPortConfigurationInstanceMRSTP Bridge Instance. default: 0
range : 0 - 12, 0: Nonerw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1.2 |
xgs360026fMRSTPPortConfigurationPathCostport path cost;when the value is 0,path cost is determined by physical port speed.
default: 0
range : 0 - 200000000, 0: Autorw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1.3 |
xgs360026fMRSTPPortConfigurationPriorityPort Priority; would be truncated to a multiple of 16.
default: 128
range : 0 - 240rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1.4 |
xgs360026fMRSTPPortConfigurationAdminEdgeport(s) as edge or non-edge.
default: 1
0: non-edge
1: edgerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1.5 |
xgs360026fMRSTPPortConfigurationAdminP2Padministrative point-to-point (p2p) port.
range : 0 - 2, default: 2
0: force to be p2p port(s)
1: force to be non-p2p port(s)
2: auto-detected according to port duplexrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1.6 |
xgs360026fMRSTPPortConfigurationMigrateCheckdefault: 0
0: none
1: perform migration check on port(s)rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.2.11.2.1.1.1.7 |
xgs360026fMRSTPPortStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.2.11.2.2 |
xgs360026fMRSTPPortStatusTableshow mrstp port information. SEQUENCE OF XGS360026FMRSTPPortStatusEntry .1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1 |
xgs360026fMRSTPPortStatusEntry XGS360026FMRSTPPortStatusEntry .1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1 |
xgs360026fMRSTPPortStatusPortThe switch port number of the MRSTP port. INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.1 |
xgs360026fMRSTPPortStatusInstanceMRSTP Bridge Instance.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.2 |
xgs360026fMRSTPPortStatusStateThe current RSTP port state. The port state can be one of the following values: DISCARDING LISTENING FORWARDING NON-MRSTP INST-DSBL.
INST-DSBL indicates that the Bridge Instance the port belongs to is disabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.3 |
xgs360026fMRSTPPortStatusRoleThe current MRSTP port role. The port role can be one of the following values: disable alternate backup ROOT DSGN none.
none indicates that the Bridge Instance the port belongs to is disabled or the port is not an MRSTP port.
DSGN indicates a Designated port role.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.4 |
xgs360026fMRSTPPortStatusPathCostpath cost.ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.5 |
xgs360026fMRSTPPortStatusPathCostConfigport path cost config.ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.6 |
xgs360026fMRSTPPortStatusPriorityport priority.ro INTEGER .1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.7 |
xgs360026fMRSTPPortStatusAdminEdgeport(s) as edge or non-edge.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.8 |
xgs360026fMRSTPPortStatusAdminP2Padministrative point-to-point (p2p) port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.2.11.2.2.1.1.9 |
xgs360026fSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3 |
xgs360026fIPSourceGuard OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.1 |
xgs360026fIPSourceGuardConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.1.1 |
xgs360026fIPSourceGuardModedefault: 0
0: disable
1: enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.3.1.1.1 |
xgs360026fIPSourceGuardPortConfigTable SEQUENCE OF XGS360026FIPSourceGuardPortConfigEntry .1.3.6.1.4.1.890.1.5.8.77.3.1.1.2 |
xgs360026fIPSourceGuardPortConfigEntry XGS360026FIPSourceGuardPortConfigEntry .1.3.6.1.4.1.890.1.5.8.77.3.1.1.2.1 |
xgs360026fIPSourceGuardPortConfigPort INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.1.1.2.1.1 |
xgs360026fIPSourceGuardPortConfigModedefault: 0
0:disable
1:enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.3.1.1.2.1.2 |
xgs360026fIPSourceGuardPortMaxDynamicClientsdefault: 99
0~2: Max Dynamic clients
99:Unlimitedrw INTEGER (0..2|99) .1.3.6.1.4.1.890.1.5.8.77.3.1.1.2.1.3 |
xgs360026fIPSourceGuardStatic OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.1.2 |
xgs360026fIPSourceGuardStaticCreatedefault: 0
0 : None (read only)
1 : Create a IP Source Guardrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.1.2.1 |
xgs360026fIPSourceGuardStaticTable SEQUENCE OF XGS360026FIPSourceGuardStaticEntry .1.3.6.1.4.1.890.1.5.8.77.3.1.2.2 |
xgs360026fIPSourceGuardStaticEntry XGS360026FIPSourceGuardStaticEntry .1.3.6.1.4.1.890.1.5.8.77.3.1.2.2.1 |
xgs360026fIPSourceGuardStaticIndex INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.1.2.2.1.1 |
xgs360026fIPSourceGuardStaticPortPort, range: 1 - port number.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.1.2.2.1.2 |
xgs360026fIPSourceGuardStaticVLANIdVLAN ID, range: 1 - 4094.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.1.2.2.1.3 |
xgs360026fIPSourceGuardStaticIPAddressIP address allowed for doing IP source guard.rw IpAddress .1.3.6.1.4.1.890.1.5.8.77.3.1.2.2.1.4 |
xgs360026fIPSourceGuardStaticMACAddressAllowed Source MAC address, format 0a 1b 2c 3d 4e 5frw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.3.1.2.2.1.5 |
xgs360026fIPSourceGuardStaticRowStatus1: active
2: notInservice
3: edit
4: destroy
5: undorw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.1.2.2.1.6 |
xgs360026fIPSourceGuardDynamicTable SEQUENCE OF XGS360026FIPSourceGuardDynamicEntry .1.3.6.1.4.1.890.1.5.8.77.3.1.3 |
xgs360026fIPSourceGuardDynamicEntry XGS360026FIPSourceGuardDynamicEntry .1.3.6.1.4.1.890.1.5.8.77.3.1.3.1 |
xgs360026fIPSourceGuardDynamicIndex INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.1.3.1.1 |
xgs360026fIPSourceGuardDynamicPortro INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.1.3.1.2 |
xgs360026fIPSourceGuardDynamicVLANIdro INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.1.3.1.3 |
xgs360026fIPSourceGuardDynamicIPAddressro IpAddress .1.3.6.1.4.1.890.1.5.8.77.3.1.3.1.4 |
xgs360026fIPSourceGuardDynamicMACAddressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.3.1.3.1.5 |
xgs360026fARPInspection OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.2 |
xgs360026fARPInspectionConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.2.1 |
xgs360026fARPInspectionConfModedefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.2.1.1 |
xgs360026fARPInspectionConfTable SEQUENCE OF XGS360026FARPInspectionConfEntry .1.3.6.1.4.1.890.1.5.8.77.3.2.1.2 |
xgs360026fARPInspectionConfEntry XGS360026FARPInspectionConfEntry .1.3.6.1.4.1.890.1.5.8.77.3.2.1.2.1 |
xgs360026fARPInspectionConfPortIndex INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.2.1.2.1.1 |
xgs360026fARPInspectionConfPortModedefault: 0
0: disable
1: enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.3.2.1.2.1.2 |
xgs360026fARPInspectionStatic OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.2.2 |
xgs360026fARPInspectionStaticCreatedefault: 0
0: none
1: createrw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.3.2.2.1 |
xgs360026fARPInspectionStaticTable SEQUENCE OF XGS360026FARPInspectionStaticEntry .1.3.6.1.4.1.890.1.5.8.77.3.2.2.2 |
xgs360026fARPInspectionStaticEntry XGS360026FARPInspectionStaticEntry .1.3.6.1.4.1.890.1.5.8.77.3.2.2.2.1 |
xgs360026fARPInspectionStaticIndex INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.2.2.2.1.1 |
xgs360026fARPInspectionStaticPortPort, range: 1 - port number.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.2.2.2.1.2 |
xgs360026fARPInspectionStaticVLANIdVLAN ID, range: 1 - 4094.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.2.2.2.1.3 |
xgs360026fARPInspectionStaticIPAddressIP address allowed for doing ARP request.rw IpAddress .1.3.6.1.4.1.890.1.5.8.77.3.2.2.2.1.4 |
xgs360026fARPInspectionStaticMACAddressAllowed Source MAC address in ARP request packets, format 0a 1b 2c 3d 4e 5frw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.3.2.2.2.1.5 |
xgs360026fARPInspectionStaticRowStatus1: active
2: notInservice
3: edit
4: destroy
5: undorw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.2.2.2.1.6 |
xgs360026fARPInspectionDynamicTable SEQUENCE OF XGS360026FARPInspectionDynamicEntry .1.3.6.1.4.1.890.1.5.8.77.3.2.3 |
xgs360026fARPInspectionDynamicEntry XGS360026FARPInspectionDynamicEntry .1.3.6.1.4.1.890.1.5.8.77.3.2.3.1 |
xgs360026fARPInspectionDynamicIndex INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.2.3.1.1 |
xgs360026fARPInspectionDynamicPortro INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.2.3.1.2 |
xgs360026fARPInspectionDynamicVLANIdro INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.2.3.1.3 |
xgs360026fARPInspectionDynamicIPAddressro IpAddress .1.3.6.1.4.1.890.1.5.8.77.3.2.3.1.4 |
xgs360026fARPInspectionDynamicMACAddressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.3.2.3.1.5 |
xgs360026fDHCPSnooping OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.3 |
xgs360026fDHCPSnoopingConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.3.1 |
xgs360026fDHCPSnoopingModedefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.3.1.1 |
xgs360026fDHCPSnoopingPortModeConfigurationTable SEQUENCE OF XGS360026FDHCPSnoopingPortModeConfigurationEntry .1.3.6.1.4.1.890.1.5.8.77.3.3.1.2 |
xgs360026fDHCPSnoopingPortModeConfigurationEntry XGS360026FDHCPSnoopingPortModeConfigurationEntry .1.3.6.1.4.1.890.1.5.8.77.3.3.1.2.1 |
xgs360026fDHCPSnoopingPortModeConfigurationPort INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.3.1.2.1.1 |
xgs360026fDHCPSnoopingPortModeConfigurationModedefault: 1
0: trust port mode
1: untrust port moderw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.3.3.1.2.1.2 |
xgs360026fDHCPSnoopingStatisticsTable SEQUENCE OF XGS360026FDHCPSnoopingStatisticsEntry .1.3.6.1.4.1.890.1.5.8.77.3.3.2 |
xgs360026fDHCPSnoopingStatisticsEntry XGS360026FDHCPSnoopingStatisticsEntry .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1 |
xgs360026fDHCPSnoopingStatisticsPort INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.1 |
xgs360026fDHCPSnoopingStatisticsCleardefault: 0
0: none
1: clearrw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.2 |
xgs360026fDHCPSnoopingRxDiscoverro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.3 |
xgs360026fDHCPSnoopingRxOfferro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.4 |
xgs360026fDHCPSnoopingRxRequestro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.5 |
xgs360026fDHCPSnoopingRxDeclinero Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.6 |
xgs360026fDHCPSnoopingRxACKro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.7 |
xgs360026fDHCPSnoopingRxNAKro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.8 |
xgs360026fDHCPSnoopingRxReleasero Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.9 |
xgs360026fDHCPSnoopingRxInformro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.10 |
xgs360026fDHCPSnoopingRxLeaseQueryro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.11 |
xgs360026fDHCPSnoopingRxLeaseUnassignedro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.12 |
xgs360026fDHCPSnoopingRxLeaseUnknownro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.13 |
xgs360026fDHCPSnoopingRxLeaseActivero Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.14 |
xgs360026fDHCPSnoopingTxDiscoverro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.15 |
xgs360026fDHCPSnoopingTxOfferro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.16 |
xgs360026fDHCPSnoopingTxRequestro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.17 |
xgs360026fDHCPSnoopingTxDeclinero Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.18 |
xgs360026fDHCPSnoopingTxACKro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.19 |
xgs360026fDHCPSnoopingTxNAKro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.20 |
xgs360026fDHCPSnoopingTxReleasero Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.21 |
xgs360026fDHCPSnoopingTxInformro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.22 |
xgs360026fDHCPSnoopingTxLeaseQueryro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.23 |
xgs360026fDHCPSnoopingTxLeaseUnassignedro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.24 |
xgs360026fDHCPSnoopingTxLeaseUnknownro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.25 |
xgs360026fDHCPSnoopingTxLeaseActivero Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.3.2.1.26 |
xgs360026fDHCPRelay OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.4 |
xgs360026fDHCPRelayConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.4.1 |
xgs360026fDHCPRelayModedefault: 0
0: disable
1: enable
We need at least one serverrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.4.1.1 |
xgs360026fDHCPRelayServerrw IpAddress .1.3.6.1.4.1.890.1.5.8.77.3.4.1.2 |
xgs360026fDHCPRelayInformationModedefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.4.1.3 |
xgs360026fDHCPRelayInformationPolicydefault: 0
0: replace
1: keep
2: droprw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.4.1.4 |
xgs360026fDHCPRelayStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.4.2 |
xgs360026fDHCPRelayServerStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.4.2.1 |
xgs360026fServerStatTransmitToServerro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.1.1 |
xgs360026fServerStatTransmitErrorro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.1.2 |
xgs360026fServerStatReceiveFromServerro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.1.3 |
xgs360026fServerStatReceiveMissingAgentOptionro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.1.4 |
xgs360026fServerStatReceiveMissingCircuitIDro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.1.5 |
xgs360026fServerStatReceiveMissingRemoteIDro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.1.6 |
xgs360026fServerStatReceiveBadCircuitIDro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.1.7 |
xgs360026fServerStatReceiveBadRemoteIDro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.1.8 |
xgs360026fDHCPRelayClientStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.4.2.2 |
xgs360026fClientStatTransmitToClientro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.2.1 |
xgs360026fClientStatTransmitErrorro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.2.2 |
xgs360026fClientStatReceivefromClientro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.2.3 |
xgs360026fClientStatReceiveAgentOptionro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.2.4 |
xgs360026fClientStatReplaceAgentOptionro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.2.5 |
xgs360026fClientStatKeepAgentOptionro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.2.6 |
xgs360026fClientStatDropAgentOptionro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.4.2.2.7 |
xgs360026fPortSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.5 |
xgs360026fPortSecLimitCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.5.1 |
xgs360026fPortSecLimitCtrlSystemConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.5.1.1 |
xgs360026fPortSecurityModedefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.5.1.1.1 |
xgs360026fPortSecurityAgingdefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.5.1.1.2 |
xgs360026fPortSecurityAgingPerioddefault: 3600, range: 10-10000000rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.5.1.1.3 |
xgs360026fPortSecLimitCtrlTable SEQUENCE OF XGS360026FPortSecLimitCtrlEntry .1.3.6.1.4.1.890.1.5.8.77.3.5.1.2 |
xgs360026fPortSecLimitCtrlEntry XGS360026FPortSecLimitCtrlEntry .1.3.6.1.4.1.890.1.5.8.77.3.5.1.2.1 |
xgs360026fPortSecLimitCtrlPort INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.5.1.2.1.1 |
xgs360026fPortSecLimitCtrlPortModedefault: 0
0: disable
1: enablerw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.3.5.1.2.1.2 |
xgs360026fPortSecLimitCtrlPortLimitdefault: 4, range: 1-1024rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.5.1.2.1.3 |
xgs360026fPortSecLimitCtrlPortActiondefault: 0
0: none
1: trap
2: shutdown
3: trap&shutdownrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.5.1.2.1.4 |
xgs360026fPortSecLimitCtrlPortStatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.3.5.1.2.1.5 |
xgs360026fPortSecLimitCtrlPortReOpendefault: 0
0: none
1: reopenrw INTEGER (0|1) .1.3.6.1.4.1.890.1.5.8.77.3.5.1.2.1.6 |
xgs360026fPortSecSwitchStatusTable SEQUENCE OF XGS360026FPortSecSwitchStatusEntry .1.3.6.1.4.1.890.1.5.8.77.3.5.2 |
xgs360026fPortSecSwitchStatusEntry XGS360026FPortSecSwitchStatusEntry .1.3.6.1.4.1.890.1.5.8.77.3.5.2.1 |
xgs360026fPortSecSwitchStatusPort INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.5.2.1.1 |
xgs360026fPortSecSwitchStatusUsersUsers Abbr: L = Limit Control, 8 = 802.1X, D = DHCP Snooping, V = Voice VLAN,
'-' means that the corresponding user module is not enabled.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.3.5.2.1.2 |
xgs360026fPortSecSwitchStatusStateShows the current state of the port : Disabled, Ready, Limit Reached, Shutdown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.3.5.2.1.3 |
xgs360026fPortSecSwitchStatusMACCountCurrentro INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.5.2.1.4 |
xgs360026fPortSecSwitchStatusMACCountLimitro INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.5.2.1.5 |
xgs360026fPortSecPortStatus OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.5.3 |
xgs360026fPortSecPortStatusPortdefault: 0
0 : Nonerw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.5.3.1 |
xgs360026fPortSecPortStatusTable SEQUENCE OF XGS360026FPortSecPortStatusEntry .1.3.6.1.4.1.890.1.5.8.77.3.5.3.2 |
xgs360026fPortSecPortStatusEntry XGS360026FPortSecPortStatusEntry .1.3.6.1.4.1.890.1.5.8.77.3.5.3.2.1 |
xgs360026fPortSecPortStatusIndex INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.5.3.2.1.1 |
xgs360026fPortSecPortStatusMACAddressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.3.5.3.2.1.2 |
xgs360026fPortSecPortStatusVLANIdro INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.5.3.2.1.3 |
xgs360026fPortSecPortStatusStateBlocked / Forwardingro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.3.5.3.2.1.4 |
xgs360026fPortSecPortStatusTimeOfAdditionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.3.5.3.2.1.5 |
xgs360026fPortSecPortStatusAgeAndHoldro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.3.5.3.2.1.6 |
xgs360026fAccessManagement OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.6 |
xgs360026fAccessMgtConf OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.6.1 |
xgs360026fAccessMgtConfModedefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.6.1.1 |
xgs360026fAccessMgtConfCreatedefault: 0
0: none
1: createrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.6.1.2 |
xgs360026fAccessMgtConfTable SEQUENCE OF XGS360026FAccessMgtConfEntry .1.3.6.1.4.1.890.1.5.8.77.3.6.1.3 |
xgs360026fAccessMgtConfEntry XGS360026FAccessMgtConfEntry .1.3.6.1.4.1.890.1.5.8.77.3.6.1.3.1 |
xgs360026fAccessMgtIndexSet Access Management config index
range : 1-16.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.6.1.3.1.1 |
xgs360026fAccessMgtAddresstype0: ipv4
1: ipv6rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.6.1.3.1.2 |
xgs360026fAccessMgtStartIpAddressStart IP address.
IP address doesn't allowed all zero or all 'ff'H.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.3.6.1.3.1.3 |
xgs360026fAccessMgtEndIpAddressEnd IP address.
IP address doesn't allowed all zero or all 'ff'H.
End ip address is not less than start ip address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.3.6.1.3.1.4 |
xgs360026fAccessMgtHttpHttpsdefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.6.1.3.1.5 |
xgs360026fAccessMgtSNMPdefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.6.1.3.1.6 |
xgs360026fAccessMgtTelnetSSHdefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.6.1.3.1.7 |
xgs360026fAccessMgtRowStatus1: active
2: notInservice
3: edit
4: destroy
5: undorw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.6.1.3.1.8 |
xgs360026fAccessMgtStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.6.2 |
xgs360026fHttpReceivedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.1 |
xgs360026fHttpAllowedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.2 |
xgs360026fHttpDiscardedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.3 |
xgs360026fHttpsReceivedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.4 |
xgs360026fHttpsAllowedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.5 |
xgs360026fHttpsDiscardedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.6 |
xgs360026fSnmpReceivedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.7 |
xgs360026fSnmpAllowedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.8 |
xgs360026fSnmpDiscardedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.9 |
xgs360026fTelnetReceivedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.10 |
xgs360026fTelnetAllowedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.11 |
xgs360026fTelnetDiscardedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.12 |
xgs360026fSSHReceivedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.13 |
xgs360026fSSHAllowedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.14 |
xgs360026fSSHDiscardedPktsro Counter32 .1.3.6.1.4.1.890.1.5.8.77.3.6.2.15 |
xgs360026fAccessMgtStatisticsClearAll0: none
1: clearrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.6.2.16 |
xgs360026fSSH OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.7 |
xgs360026fSSHModedefault: 1
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.7.1 |
xgs360026fHTTPS OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.8 |
xgs360026fHTTPSModedefault: 1
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.8.1 |
xgs360026fHTTPSAutoRedirectdefault: 0
0: disable
1: enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.8.2 |
xgs360026fAuthMethod OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.3.9 |
xgs360026fConsoleAuthMethoddefault: 1
0: none
1: local
2: RADIUS
3: TACACS+rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.9.1 |
xgs360026fConsoleFallbackdefault: 0
0:disable
1:enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.9.2 |
xgs360026fTelnetAuthMethoddefault: 1
0: none
1: local
2: RADIUS
3: TACACS+rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.9.3 |
xgs360026fTelnetFallbackdefault: 0
0:disable
1:enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.9.4 |
xgs360026fSshAuthMethoddefault: 1
0: none
1: local
2: RADIUS
3: TACACS+rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.9.5 |
xgs360026fSshFallbackdefault: 0
0:disable
1:enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.9.6 |
xgs360026fWebAuthMethoddefault: 1
0: none
1: local
2: RADIUS
3: TACACS+rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.3.9.7 |
xgs360026fWebFallbackdefault: 0
0:disable
1:enablerw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.3.9.8 |
xgs360026fMaintenance OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.4 |
xgs360026fRestartDevicedefault: 0
0:none
1:yesrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.4.1 |
xgs360026fFirmware OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.4.2 |
xgs360026fFirmwareIpAddressGet/Set the firmware tftp server.rw IpAddress .1.3.6.1.4.1.890.1.5.8.77.4.2.1 |
xgs360026fFirmwareFileNameGet/Set the path and filename for firmware upgrading.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.4.2.2 |
xgs360026fDoFirmwareUpgradeDo firmware upgrade. Get this OID always return zero.
1 - do firmware upgrade.
0 - do nothing.rw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.4.2.3 |
xgs360026fSaveOrRestore OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.4.3 |
xgs360026fFactoryDefaultsdefault: 0
0:none
1:yesrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.4.3.1 |
xgs360026fSaveStartdefault: 0
0:none
1:yesrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.4.3.2 |
xgs360026fSaveUserdefault: 0
0:none
1:yesrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.4.3.3 |
xgs360026fRestoreUserdefault: 0
0:none
1:yesrw INTEGER(0|1) .1.3.6.1.4.1.890.1.5.8.77.4.3.4 |
xgs360026fExportOrImport OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.4.4 |
xgs360026fExportIpAddressGet/Set the export tftp server.rw IpAddress .1.3.6.1.4.1.890.1.5.8.77.4.4.1 |
xgs360026fExportConfigNameGet/Set the export file path and name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.4.4.2 |
xgs360026fDoExportConfigDo export-config.
Get this OID always return zero.
1 - export.rw INTEGER(1) .1.3.6.1.4.1.890.1.5.8.77.4.4.3 |
xgs360026fImportIpAddressGet/Set the import tftp server.rw IpAddress .1.3.6.1.4.1.890.1.5.8.77.4.4.4 |
xgs360026fImportConfigNameGet/Set the import file path and name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.4.4.5 |
xgs360026fDoImportConfigDo export-config.
Get this OID always return zero.
1 - import.rw INTEGER(1) .1.3.6.1.4.1.890.1.5.8.77.4.4.6 |
xgs360026fDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.4.5 |
xgs360026fPingIpAddressThe destination IP Address.rw IpAddress .1.3.6.1.4.1.890.1.5.8.77.4.5.1 |
xgs360026fPingSizeSize of ICMP echo packet.
range : 60-1400, default : 64.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.4.5.2 |
xgs360026fDoPingConfigDo ping-config.
Get this OID always return zero.
1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram
to elicit an ICMP ECHO_RESPONSE from a host or gateway.rw INTEGER(1) .1.3.6.1.4.1.890.1.5.8.77.4.5.3 |
xgs360026fPingResultShow ping result.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.4.5.4 |
xgs360026fPing6IpAddressThe destination IPv6 Address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.4.5.5 |
xgs360026fPing6SizeSize of ICMP echo packet.
range : 60-1400.rw INTEGER .1.3.6.1.4.1.890.1.5.8.77.4.5.6 |
xgs360026fDoPing6ConfigDo ping-config.
Get this OID always return zero.
1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram
to elicit an ICMP ECHO_RESPONSE from a host or gateway.rw INTEGER(1) .1.3.6.1.4.1.890.1.5.8.77.4.5.7 |
xgs360026fPing6ResultShow ping result.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.4.5.8 |
xgs360026fVeriPHY OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.4.5.9 |
xgs360026fVeriPHYTestRun VeriPHY Cable Diagnostics.
port, range : 0 - port number.
0 : ALLrw INTEGER .1.3.6.1.4.1.890.1.5.8.77.4.5.9.1 |
xgs360026fVeriPHYTable SEQUENCE OF XGS360026FVeriPHYEntry .1.3.6.1.4.1.890.1.5.8.77.4.5.9.2 |
xgs360026fVeriPHYEntry XGS360026FVeriPHYEntry .1.3.6.1.4.1.890.1.5.8.77.4.5.9.2.1 |
xgs360026fVeriPHYPortThe length (in meters) of the cable pair. INTEGER .1.3.6.1.4.1.890.1.5.8.77.4.5.9.2.1.1 |
xgs360026fVeriPHYPairAThe status of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.4.5.9.2.1.2 |
xgs360026fVeriPHYLengthAThe length (in meters) of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.4.5.9.2.1.3 |
xgs360026fVeriPHYPairBThe status of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.4.5.9.2.1.4 |
xgs360026fVeriPHYLengthBThe length (in meters) of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.4.5.9.2.1.5 |
xgs360026fVeriPHYPairCThe status of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.4.5.9.2.1.6 |
xgs360026fVeriPHYLengthCThe length (in meters) of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.4.5.9.2.1.7 |
xgs360026fVeriPHYPairDThe status of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.4.5.9.2.1.8 |
xgs360026fVeriPHYLengthDThe length (in meters) of the cable pair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.4.5.9.2.1.9 |
xgs360026fTrap OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.5 |
xgs360026fTrapEvent OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.5.1 |
xgs360026fEmergencyThe severity level is Emergency. The system is unusable. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.77.5.1.1 |
xgs360026fAlertThe severity level is Alert. The action must be taken immediately. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.77.5.1.2 |
xgs360026fCriticalThe severity level is Critical. Critical conditions. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.77.5.1.3 |
xgs360026fErrorThe severity level is Error. Error conditions. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.77.5.1.4 |
xgs360026fWarningThe severity level is Warning. Warning conditions. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.77.5.1.5 |
xgs360026fNoticeThe severity level is Notice. Normal but significant condition. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.77.5.1.6 |
xgs360026fInformationalThe severity level is Informational. Informational messages. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.77.5.1.7 |
xgs360026fDebugThe severity level is Debug. debug-level messages. NOTIFICATION-TYPE .1.3.6.1.4.1.890.1.5.8.77.5.1.8 |
xgs360026fTrapVariable OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.5.8.77.5.2 |
xgs360026fInformationTrap information.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.5.8.77.5.2.1 |