The IES5206-MIB provides vendor-specific SNMP management capabilities for the IES5206, IES5212, and IES6217 industrial Ethernet switches, exposing proprietary objects for monitoring device health, interface statistics, and system configuration parameters. This private MIB extension enables granular visibility into hardware status, port-level metrics, and operational states specific to these Allied Telesis industrial networking platforms.

2259 objects→

ZYXEL-ves1724-56-MIB

SNMP MIB module

1842 objects→

ZYXEL-ves1608FE57-MIB

SNMP MIB module

1357 objects→

ZYXEL-XGS4700-48F-MIB

SNMP MIB module

1136 objects→

ZYXEL-MGS370012C-MIB

SNMP MIB module

1095 objects→

Object Name	Syntax	OID
zyxelPoeThe subtree for Power over Ethernet (PoE) MODULE-IDENTITY `.1.3.6.1.4.1.890.1.15.3.59`	MODULE-IDENTITY	`.1.3.6.1.4.1.890.1.15.3.59`
zyxelPoeSetup OBJECT IDENTIFIER `.1.3.6.1.4.1.890.1.15.3.59.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.890.1.15.3.59.1`
zyPoeModeSet POE Mode Setup Consumption mode (0), Classification mode (1).rw Enumeration `.1.3.6.1.4.1.890.1.15.3.59.1.1`	Enumeration	`.1.3.6.1.4.1.890.1.15.3.59.1.1`
zyxelPoePsePortTableThe table contains power ethernet port information. SEQUENCE OF ZyxelPoePsePortEntry `.1.3.6.1.4.1.890.1.15.3.59.1.2`	SEQUENCE OF ZyxelPoePsePortEntry	`.1.3.6.1.4.1.890.1.15.3.59.1.2`
zyxelPoePsePortEntryAn entry contains power ethernet port information. ZyxelPoePsePortEntry `.1.3.6.1.4.1.890.1.15.3.59.1.2.1`	ZyxelPoePsePortEntry	`.1.3.6.1.4.1.890.1.15.3.59.1.2.1`
zyPoePsePortMaxPowerPoE PSE port user-defined max power expressed in milliwatt, Valid value should be between 1000 and 33000,in steps of 200. Value 0(Default) means to disable user-defined max power.rw INTEGER `.1.3.6.1.4.1.890.1.15.3.59.1.2.1.1`	INTEGER	`.1.3.6.1.4.1.890.1.15.3.59.1.2.1.1`
zyPoePsePowerUpSet PoE Power Up Mode Setup 802.3af mode (0), Legacy mode (1), Pre-802.3at mode(2), 802.3at mode(3)rw Enumeration `.1.3.6.1.4.1.890.1.15.3.59.1.2.1.2`	Enumeration	`.1.3.6.1.4.1.890.1.15.3.59.1.2.1.2`
zyPoePsePortTimeRangeTime-Based PoE allow to schedule the PoE works time. Type in the time-range name witch is already created.rw DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.890.1.15.3.59.1.2.1.3`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.890.1.15.3.59.1.2.1.3`
zyPoePseWideRangeDetectionSet PoE Wide range detection Enable/Disable.rw EnabledStatus (P-BRIDGE-MIB) `.1.3.6.1.4.1.890.1.15.3.59.1.2.1.4`	EnabledStatus (P-BRIDGE-MIB)	`.1.3.6.1.4.1.890.1.15.3.59.1.2.1.4`
zyPoePreAllocateSet Poe pre-allocate Enable/Disable.rw EnabledStatus (P-BRIDGE-MIB) `.1.3.6.1.4.1.890.1.15.3.59.1.3`	EnabledStatus (P-BRIDGE-MIB)	`.1.3.6.1.4.1.890.1.15.3.59.1.3`
zyPoeDualDetectionSet Poe dual detection Enable/Disable.rw EnabledStatus (P-BRIDGE-MIB) `.1.3.6.1.4.1.890.1.15.3.59.1.4`	EnabledStatus (P-BRIDGE-MIB)	`.1.3.6.1.4.1.890.1.15.3.59.1.4`
zyPoePowerSequenceDelaySet Poe Power Sequence Mode Delay Setup Enable/Disable.rw EnabledStatus (P-BRIDGE-MIB) `.1.3.6.1.4.1.890.1.15.3.59.1.5`	EnabledStatus (P-BRIDGE-MIB)	`.1.3.6.1.4.1.890.1.15.3.59.1.5`
zyxelPoeStatus OBJECT IDENTIFIER `.1.3.6.1.4.1.890.1.15.3.59.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.890.1.15.3.59.2`
zyxelPoePsePortInfoTableThe table contains power ethernet port information. SEQUENCE OF ZyxelPoePsePortInfoEntry `.1.3.6.1.4.1.890.1.15.3.59.2.1`	SEQUENCE OF ZyxelPoePsePortInfoEntry	`.1.3.6.1.4.1.890.1.15.3.59.2.1`
zyxelPoePsePortInfoEntryAn entry contains power ethernet port information. ZyxelPoePsePortInfoEntry `.1.3.6.1.4.1.890.1.15.3.59.2.1.1`	ZyxelPoePsePortInfoEntry	`.1.3.6.1.4.1.890.1.15.3.59.2.1.1`
zyPoePsePortInfoPowerConsumptionPoE PSE port power consumption expressed in milliwatt.ro INTEGER `.1.3.6.1.4.1.890.1.15.3.59.2.1.1.1`	INTEGER	`.1.3.6.1.4.1.890.1.15.3.59.2.1.1.1`
zyPoePsePortTimeRangeStateNone(0): not bind with any time range. In(1): system time is in the time range. Out(2): system time is out of the time range.ro Enumeration `.1.3.6.1.4.1.890.1.15.3.59.2.1.1.2`	Enumeration	`.1.3.6.1.4.1.890.1.15.3.59.2.1.1.2`
zyxelPoeTrapInfoObject OBJECT IDENTIFIER `.1.3.6.1.4.1.890.1.15.3.59.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.890.1.15.3.59.3`
zyPoeTrapPsePowerSupplyFailedReasonInternal-power-supply-for-PoE-failed(0): Internal power supply for PoE has failed. RPS-for-PoE-failed(1): External power supply for PoE (RPS) has failed. RPS-fan-failed(2): RPS fan has failed. RPS-over-temperature(3): RPS temperature is out of the normal operation range. Enumeration `.1.3.6.1.4.1.890.1.15.3.59.3.1`	Enumeration	`.1.3.6.1.4.1.890.1.15.3.59.3.1`
zyxelPoeNotifications OBJECT IDENTIFIER `.1.3.6.1.4.1.890.1.15.3.59.4`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.890.1.15.3.59.4`
zyPoePowerPortOverloadPort is off, due to the overload state according to 802.3af. NOTIFICATION-TYPE `.1.3.6.1.4.1.890.1.15.3.59.4.1`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.890.1.15.3.59.4.1`
zyPoePowerPortShortCircuitPort is off, due to short circuit. NOTIFICATION-TYPE `.1.3.6.1.4.1.890.1.15.3.59.4.2`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.890.1.15.3.59.4.2`
zyPoePowerPortOverSystemBudgetPort is off, due to over system budget. NOTIFICATION-TYPE `.1.3.6.1.4.1.890.1.15.3.59.4.3`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.890.1.15.3.59.4.3`
zyPoePsePowerSupplyFailedPSE power supply failed, due to the reason of zyxelPoeTrapPsePowerSupplyFailedReason. NOTIFICATION-TYPE `.1.3.6.1.4.1.890.1.15.3.59.4.4`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.890.1.15.3.59.4.4`
zyPoePowerPortOverloadRecoveredPort is on, since recovered from overload state. NOTIFICATION-TYPE `.1.3.6.1.4.1.890.1.15.3.59.4.5`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.890.1.15.3.59.4.5`
zyPoePowerPortShortCircuitRecoveredPort is on, since recovered from short circuit. NOTIFICATION-TYPE `.1.3.6.1.4.1.890.1.15.3.59.4.6`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.890.1.15.3.59.4.6`
zyPoePowerPortOverSystemBudgetRecoveredPort is on, since recovered from over system budget. NOTIFICATION-TYPE `.1.3.6.1.4.1.890.1.15.3.59.4.7`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.890.1.15.3.59.4.7`