ZYXEL-MAC-AUTHENTICATION-MIB
AI MIB Summary
The ZYXEL-MAC-AUTHENTICATION-MIB enables monitoring and management of 802.1X MAC Authentication Bypass (MAB) session states, authentication status, and associated interface counters on ZyXEL network infrastructure. This module provides visibility into the number of authenticated MAC addresses, failed authentication attempts, and the operational state of MAC-based access control policies.
The subtree for mac authentication
Main OID:
zyxelMacAuthentication.1.3.6.1.4.1.890.1.15.3.46
13
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
13 total| Object Name |
|---|
zyxelMacAuthenticationThe subtree for mac authentication MODULE-IDENTITY .1.3.6.1.4.1.890.1.15.3.46 |
zyxelMacAuthenticationSetup OBJECT IDENTIFIER .1.3.6.1.4.1.890.1.15.3.46.1 |
zyMacAuthenticationStateEnable/disable MAC authentication on the switch. MAC authentication works in a very similar way to IEEE 802.1x authentication.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.46.1.1 |
zyMacAuthenticationNamePrefixType the prefix that is appended to all MAC addresses sent to the RADIUS server for authentication.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.46.1.2 |
zyMacAuthenticationPasswordType the password the switch sends along with the MAC address of a client for authentication with the RADIUS server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.890.1.15.3.46.1.3 |
zyMacAuthenticationTimeoutSpecify the amount of time before the switch allows a client MAC address that fails authentication to try and authenticate again. Maximum time is 3000 seconds.rw INTEGER .1.3.6.1.4.1.890.1.15.3.46.1.4 |
zyxelMacAuthenticationPortTableThe table contains MAC authentication port configuration. SEQUENCE OF ZyxelMacAuthenticationPortEntry .1.3.6.1.4.1.890.1.15.3.46.1.5 |
zyxelMacAuthenticationPortEntryAn entry contains MAC authentication port configuration. ZyxelMacAuthenticationPortEntry .1.3.6.1.4.1.890.1.15.3.46.1.5.1 |
zyMacAuthenticationPortStateEnable/disable MAC authentication on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.890.1.15.3.46.1.5.1.1 |
zyMacAuthenticationPortTrustedVlan1kA string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is associated to this primary VLAN, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory.rw OCTET STRING .1.3.6.1.4.1.890.1.15.3.46.1.5.1.2 |
zyMacAuthenticationPortTrustedVlan2kA string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is associated to this primary VLAN, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory.rw OCTET STRING .1.3.6.1.4.1.890.1.15.3.46.1.5.1.3 |
zyMacAuthenticationPortTrustedVlan3kA string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is associated to this primary VLAN, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory.rw OCTET STRING .1.3.6.1.4.1.890.1.15.3.46.1.5.1.4 |
zyMacAuthenticationPortTrustedVlan4kA string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is associated to this primary VLAN, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory.rw OCTET STRING .1.3.6.1.4.1.890.1.15.3.46.1.5.1.5 |