ZHONE-COM-ATM-MIB
AI MIB Summary
The ZHONE-COM-ATM-MIB enables monitoring and management of Zhone Technologies ATM network interfaces, specifically tracking physical layer parameters, traffic counters, and port states for Asynchronous Transfer Mode circuits.
This is the Zhone module identifier for the Zhone ATM MIB extension module.
Main OID:
comAtmExtension.1.3.6.1.4.1.5504.6.25
117
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
117 total| Object Name |
|---|
zhoneAtmExtensionThis is the Zhone extension MIB tree to the standard ATM
defined by rfc2515. OBJECT IDENTIFIER .1.3.6.1.4.1.5504.4.2.2 |
zhoneAtmVclExtTableZhone extension table for the atmVclTable defined in
rfc2515. SEQUENCE OF ZhoneAtmVclExtEntry .1.3.6.1.4.1.5504.4.2.2.1 |
zhoneAtmVclExtEntryAn entry in the atmVclExtTable.
atmVclExtEntry is an augmentation to the atmVclEntry
defined in rfc2515. ZhoneAtmVclExtEntry .1.3.6.1.4.1.5504.4.2.2.1.1 |
zhoneAtmVclExtFaultDetectionTypeThis is used to configure VCL fault detection. The valid values
are:
* disabled - Fault detection is disabled. This is the default.
* oamF5Loopback - This option uses standard OAM fault
management cells as defined in ITU.610 for fault detection.
Automatic loopback diagnostic cells are sent to the IAD.
When fault detection is enabled, atmVclOperStatusChange
notification trap is used to indicate to the NMS station
an VCL has gone down or has come back up.rw Enumeration .1.3.6.1.4.1.5504.4.2.2.1.1.1 |
zhoneAtmVclExtOamF5PingThis is used to send a OAM F5 loopback cell for fault detection.
The value will automatically revert to disabled after the set
is complete. The valid values are:
* disabled - OAM F5 loopback cell is not being sent. This is the default.
* endToEnd - This option uses standard OAM fault management cells as
defined in ITU.610 for fault detection. Setting this will
send a OAM F5 end-to-end loopback cell to be sent
* segment - This is not supported at this timerw Enumeration .1.3.6.1.4.1.5504.4.2.2.1.1.2 |
zhoneAtmVclExtOamF5PingStatusTRUE if ping was successfull and FALSE if failedro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.4.2.2.1.1.3 |
zhoneAtmVclExtTrafficContainerIndexIndex number of a PON traffic container associated with a
VCL definition.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.1.1.4 |
zhoneAtmVclExtOamF4PingThis is used to send a OAM F4 loopback cell for fault detection.
The value will automatically revert to disabled after the set
is complete. The valid values are:
* disabled - OAM F4 loopback cell is not being sent. This is the default.
* endToEnd - This option uses standard OAM fault management cells as
defined in ITU.610 for fault detection. Setting this will
send a OAM F4 end-to-end loopback cell to be sent
* segment - This is not supported at this timerw Enumeration .1.3.6.1.4.1.5504.4.2.2.1.1.5 |
zhoneAtmVclExtOamF4PingStatusTRUE if ping was successfull and FALSE if failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.4.2.2.1.1.6 |
zhoneAtmTrapsAll the Zhone ATM traps will be defined under this OID. OBJECT IDENTIFIER .1.3.6.1.4.1.5504.4.2.2.2 |
zhoneAtmV2TrapsThis object identity adds a zero(0) for the next to last
sub-identifier which should be used for new SNMPv2 Traps. OBJECT IDENTIFIER .1.3.6.1.4.1.5504.4.2.2.2.0 |
atmVclOperStatusChangeA notification is sent when the operational status of an ATM
VCL changes.
The VCL entity is identified by its ifIndex, VPI and VCI
values in the trap instance OIDs. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.4.2.2.2.0.1 |
atmDsx3PlcpAlarmStatusChangeThis trap indicates if there is an
alarm present for the DS3 PLCP. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.4.2.2.2.0.2 |
atmInterfaceTCAlarmStateChangeThis trap indicates that there is an
alarm present for the TC Sublayer. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.4.2.2.2.0.3 |
atmVclBandwidthUnavailableThis trap indicates that guranteed bandwidth specified by
zhoneAtmTrafficDescrParamExtTrnkVclRate in the traffic
descriptor is not available in the system.
This is sent when a VCL is activated with the traffic
descriptor which specifies higher than available rate
or a VCL is activated with the traffic descriptor
which specifies the vcl-rate value which can cause
available bandwidth to run out.
In this trap, shelf/slot is sent as part of the common
fields sent in all traps. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.4.2.2.2.0.4 |
atmVplOperStatusChangeDescription. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.4.2.2.2.0.5 |
atmOamF5PingStatusA notification is sent when the OAM F5 Ping succeeds or
fails. The entity is identified by its ifIndex, VPI and
VCI values in the trap instance OIDs. A status value of
true indicates successful Ping, otherwise unsuccessful Ping. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.4.2.2.2.0.6 |
atmVpiAutoCreateCompleteNotification indicating Vpi auto creation is complete. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.4.2.2.2.0.7 |
atmOamF4PingStatusA notification is sent when the OAM F4 Ping succeeds or
fails. The entity is identified by its ifIndex, and VPI
values in the trap instance OIDs. A status value of true
indicates successful Ping, otherwise unsuccessful Ping. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.4.2.2.2.0.8 |
atmVclExtOamF4PingStatusA notification is sent when the VCL OAM F4 Ping succeeds or
fails. The entity is identified by its ifIndex, vpi and vci
values in the trap instance OIDs.
zhoneAtmVclExtOamF4PingStatus value of true
indicates successful Ping, otherwise unsuccessful Ping. NOTIFICATION-TYPE .1.3.6.1.4.1.5504.4.2.2.2.0.9 |
zhoneAtmGroupsZhone ATM object groups and notification groups will
be defined under this object identity. OBJECT IDENTIFIER .1.3.6.1.4.1.5504.4.2.2.3 |
zhoneAtmTrafficDescrParamExtTableZhone extension table for the atmTrafficDescrParamTable
defined in rfc2515. SEQUENCE OF ZhoneAtmTrafficDescrParamExtEntry .1.3.6.1.4.1.5504.4.2.2.4 |
zhoneAtmTrafficDescrParamExtEntryThis is extension of AtmTrafficDescrParamEntry defined
in rfc2515. ZhoneAtmTrafficDescrParamExtEntry .1.3.6.1.4.1.5504.4.2.2.4.1 |
zhoneAtmTrafficDescrParamExtTrnkVclRateThis field is used to describe the minimum guaranteed rate
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk Cards. It is applicable only for RTVBR service
category.
Unlike switched voice calls in the TDM world we cannot
oversubscribe bandwidth because all of our voice calls must be
connected at all times so that we can receive signaling to tell
us that the phone when off hook. Instead of oversubscribing we
suggest that the service provide under provision their voice calls.
An example of this would be a normal good quality voice call over
ATM requires about 80kb of bandwidth. To share the bandwidth
resource over several customers the service provider would instead
allocate (for example) rate16K for a single voice channel, this
would allow 5 channels to share the bandwidth required to connect
a good quality voice call. Any value less than rate80K could be
used if the service provider wished to share bandwidth resources
over more than one voice call. In order for this method to
produce a good quality voice call enough bandwidth must be
unallocated and used in a shared pool by all connections. When the
buffering is not adequate for a good quality call the connection
will not terminate, instead the call quality will suffer. Values
greater than rate80K would be used by devices like a PBX.
For all service categories other than RTVBR, unused is the only
valid value.For RTVBR unused is not a valid value and one of the
rates has to be specified.
This parameter is used independently for transmit and receive traffic
based on the traffic descriptor specified for transmit and receive
in the VCL. Changing this parameter may cause a trap if newly utilized bandwidth
for a card exceeds its available bandwidth. It may happen on
multiple cards and therefore there can be multiple traps.rw Enumeration .1.3.6.1.4.1.5504.4.2.2.4.1.1 |
zhoneAtmTrafficDescrParamExtCacDividerThis object allows users to oversubsribe. The
rate subtracted from CAC is PCR or SCR divided by
this object.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.4.1.2 |
zhoneAtmTrafficDescrParamExtUsageParameterControlIf set to 'false', this object disables polcing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.4.2.2.4.1.3 |
zhoneAtmStatsExtTableThese statistics values are coming from fabric interface. SEQUENCE OF ZhoneAtmStatsExtEntry .1.3.6.1.4.1.5504.4.2.2.5 |
zhoneAtmStatsExtEntryDefinitions of Forward and Backward:
Internal to ATM Switch Fabric
=============================================================
|Ext|==>IngressFwd==>| |==>EgressFwd====>|Int|
PortPhy<->|VC | |APC Switch Fabric| |VC |<->Bus/SAR/DSP
| |<==EgressBack<==| |<==IngressBack<==| | Phy
============================================================= ZhoneAtmStatsExtEntry .1.3.6.1.4.1.5504.4.2.2.5.1 |
zhoneAtmStatsTotalInitialCellsRxTotal Initial Cells Received. Total cells received across the
ingress interface for a given VC, and not discarded by policing
prior to thresholding (includes CPU insertions but excludes Atm switch fabric
generated ingress OAM insertions).ro Counter64 .1.3.6.1.4.1.5504.4.2.2.5.1.1 |
zhoneAtmStatsTotalFabricCellsRxTotal Cells Recevied at Fabric.Total cells received across
the fabric interface for a given VC, including cells discarded
due to parity errors.ro Counter64 .1.3.6.1.4.1.5504.4.2.2.5.1.2 |
zhoneAtmStatsTotalFinalCLP0CellsRxTotal CLP0 Cells received by fabric. This field
is setup to monitor egress total cells
transmitted CLP0.ro Counter64 .1.3.6.1.4.1.5504.4.2.2.5.1.3 |
zhoneAtmStatsTotalFinalCLP1CellsRxTotal CLP1 Cells received by fabric. This field
is setup to monitor egress total cells
transmitted CLP1.ro Counter64 .1.3.6.1.4.1.5504.4.2.2.5.1.4 |
zhoneAtmStatsTotalInitialCellsTxInitial Total Cells Transmitted. Total cells transmitted. across the
ingress interface for a given VC, and not discarded by policing
prior to thresholding (includes CPU insertions but excludes Atm switch fabric
generated ingress OAM insertions).ro Counter64 .1.3.6.1.4.1.5504.4.2.2.5.1.5 |
zhoneAtmStatsTotalFabricCellsTxTotal cells transmitted at fabric interace.Total cells transmitted across
the fabric interface for a given VC, including cells discarded
due to parity errors.ro Counter64 .1.3.6.1.4.1.5504.4.2.2.5.1.6 |
zhoneAtmStatsTotalFinalCLP0CellsTxTotal CLP0 Cells Transmitted. This field
is setup to monitor egress total cells
transmitted CLP0.ro Counter64 .1.3.6.1.4.1.5504.4.2.2.5.1.7 |
zhoneAtmStatsTotalFinalCLP1CellsTxTotal CLP1 Cells Transmitted. This field
is setup to monitor egress total cells
transmitted CLP1.ro Counter64 .1.3.6.1.4.1.5504.4.2.2.5.1.8 |
zhoneAtmVclRateExtParamThis is the Zhone extension MIB tree to the ATM VCL rates. OBJECT IDENTIFIER .1.3.6.1.4.1.5504.4.2.2.6 |
zhoneAtmVclRateExtParam1This field is used to describe the first least field of
total 16 minimum guaranteed rate which is configurable
by user for a VCL which is bound to this traffic
descriptor for BAN ATM Trunk or MALC uplink Cards.
It is applicable only for RTVBR/NRTVBR or CBR
service category. For RTVBR/NRTVBR service category,
this value can be set in the rfc2515 td_param2 of
the traffice descriptor table. For CBR service
category, this value can be set in the td_param1
field. The maximum rates capacitiy is 16, any
value which is not matched in any one of those 16
rates will be rejected.
Unlike switched voice calls in the TDM world we
cannot oversubscribe bandwidth because all of our
voice calls must be connected at all times so that
we can receive signaling to tell us that the phone
when off hook. Instead of oversubscribing we
suggest that the service provide under provision
their voice calls. An example of this would be a
normal good quality voice call over ATM requires
about 189 CPS. To share the bandwidth
resource over several customers the service
provider would instead
allocate (for example) 38 CPS for a single voice
channel, this would allow 5 channels to share the
bandwidth required to connect a good quality voice
call. Any value less than 189 CPS could be used if
the service provider wished to share bandwidth
resources over more than one voice call. In order
for this method to produce a good quality voice call
enough bandwidth must be unallocated and used in a
shared pool by all connections. When the buffering
is not adequate for a good quality call the connection
will not terminate, instead the call quality will
suffer. Values greater than 189 CPS would be used by
devices like a PBX. This parameter is used independently
for transmit and receive traffic based on the traffic
descriptor specified for transmit and receive in the VCL.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.1 |
zhoneAtmVclRateExtParam2This field is used to describe the second least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.2 |
zhoneAtmVclRateExtParam3This field is used to describe the third least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.3 |
zhoneAtmVclRateExtParam4This field is used to describe the fourth least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.4 |
zhoneAtmVclRateExtParam5This field is used to describe the fifth least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.5 |
zhoneAtmVclRateExtParam6This field is used to describe the sixth least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.6 |
zhoneAtmVclRateExtParam7This field is used to describe the seventh least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.7 |
zhoneAtmVclRateExtParam8This field is used to describe the eighth least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.8 |
zhoneAtmVclRateExtParam9This field is used to describe the ninth least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.9 |
zhoneAtmVclRateExtParam10This field is used to describe the tenth least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.10 |
zhoneAtmVclRateExtParam11This field is used to describe the eleventh least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.11 |
zhoneAtmVclRateExtParam12This field is used to describe the twelfth least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.12 |
zhoneAtmVclRateExtParam13This field is used to describe the thirteenth least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.13 |
zhoneAtmVclRateExtParam14This field is used to describe the fouthteenth least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.14 |
zhoneAtmVclRateExtParam15This field is used to describe the fifteenth least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.15 |
zhoneAtmVclRateExtParam16This field is used to describe the sixteenth least field of total 16
minimum guaranteed rate which is configurable by user
for a VCL which is bound to this traffic descriptor for BAN
ATM Trunk or MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.16 |
zhoneAtmVclRateExtParam1Grp2This field is used to describe the first least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.17 |
zhoneAtmVclRateExtParam2Grp2This field is used to describe the second least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.18 |
zhoneAtmVclRateExtParam3Grp2This field is used to describe the third least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.19 |
zhoneAtmVclRateExtParam4Grp2This field is used to describe the fourth least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.20 |
zhoneAtmVclRateExtParam5Grp2This field is used to describe the fifth least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.21 |
zhoneAtmVclRateExtParam6Grp2This field is used to describe the sixth least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.22 |
zhoneAtmVclRateExtParam7Grp2This field is used to describe the seventh least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.23 |
zhoneAtmVclRateExtParam8Grp2This field is used to describe the eighth least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.24 |
zhoneAtmVclRateExtParam9Grp2This field is used to describe the ninth least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.25 |
zhoneAtmVclRateExtParam10Grp2This field is used to describe the tenth least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.26 |
zhoneAtmVclRateExtParam11Grp2This field is used to describe the eleventh least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.27 |
zhoneAtmVclRateExtParam12Grp2This field is used to describe the twelfth least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.28 |
zhoneAtmVclRateExtParam13Grp2This field is used to describe the thirteenth least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.29 |
zhoneAtmVclRateExtParam14Grp2This field is used to describe the fourteenth least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.30 |
zhoneAtmVclRateExtParam15Grp2This field is used to describe the fifthteenth least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.31 |
zhoneAtmVclRateExtParam16Grp2This field is used to describe the sixthteenth least
field of total 16 minimum guaranteed rate which
is configurable by user for a VCL which is bound
to this traffic descriptor for BAN ATM Trunk or
MALC uplink Cards.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.6.32 |
zhoneAtmVplExtTableZhone extension table for the atmVplTable defined in
rfc2515. SEQUENCE OF ZhoneAtmVplExtEntry .1.3.6.1.4.1.5504.4.2.2.7 |
zhoneAtmVplExtEntryNOT CURRENTLY IMPLEMENTED.
An entry in the atmVplExtTable.
atmVplExtEntry is an augmentation to the atmVplEntry
defined in rfc2515. ZhoneAtmVplExtEntry .1.3.6.1.4.1.5504.4.2.2.7.1 |
zhoneAtmVplExtFaultDetectionTypeNOT CURRENTLY IMPLEMENTED.
This is used to configure VPL fault detection.
The valid values are:
* disabled - Fault detection is disabled.
This is the default.
* oamF4Loopback - This option uses standard OAM fault
management cells as defined in ITU.610 for fault detection.
Automatic loopback diagnostic cells are sent to the IAD.
When fault detection is enabled, atmVplOperStatusChange
notification trap is used to indicate to the NMS station
that a VPL has gone down or has come back up.rw Enumeration .1.3.6.1.4.1.5504.4.2.2.7.1.1 |
zhoneAtmVplExtTrafficContainerIndexIndex number of a PON traffic container associated with a
VPL definition.
NOTE: MULTIPLE VARBINDS ACROSS THE VPL TABLE AND
THE VPL EXTENSI0N TABLE ARE NOT ALLOWED! It turns out that
anyone trying to set just the traffic container index would
inadvertantly try to create a Vpl with default settings.
To set the traffic container field, the Vpl must be created
first.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.7.1.2 |
zhoneAtmConnectionStatsTableTable which describes the allocated and available ATM
connections on a Zhone device. SEQUENCE OF ZhoneAtmConnectionStatsEntry .1.3.6.1.4.1.5504.4.2.2.8 |
zhoneAtmConnectionStatsEntryAn entry based on shelf/slot which describes the
total allocated and available ATM connections for
that shelf/slot. ZhoneAtmConnectionStatsEntry .1.3.6.1.4.1.5504.4.2.2.8.1 |
zhoneAtmConnectionsAvailableThe total available ATM connections for a particular
shelf/slot.
This number is hardware dependent.
Whenever a VPI is allocated for a particular shelf/slot,
the number of connections allocated for that VPI is
subtracted from the total available and is returned
in this value.ro Integer32 .1.3.6.1.4.1.5504.4.2.2.8.1.1 |
zhoneAtmConnectionsAllocatedThe total allocated ATM connections for a particular
shelf/slot.
For a particular VPI, we calculate the number of
connections allocated by the following rule:
A VP Switched VPI has a Max VCI of 0 and uses 3 connections.
A VC Switched VPI has a Max VCI of n (the number n is a
power of 2 and is user selected) and uses n connections.
The sum of all allocated connections for all VPIs on
the selected shelf/slot is the number returned for
this value.ro Integer32 .1.3.6.1.4.1.5504.4.2.2.8.1.2 |
zhoneAtmVpiTableTable which describes attributes associated to a
particular VPI.
Anytime you add to, delete from or modify any entry
in this table, you must reboot the card in order for
these changes to take effect. The reason for this is
that the APC must be re-programmed and the only way
to do this is by doing a reboot.
In addition, you will not be allowed to modify, create
or delete any atm-vcl entry which is on the same card
as the VPI until after the card has been rebooted. SEQUENCE OF ZhoneAtmVpiEntry .1.3.6.1.4.1.5504.4.2.2.9 |
zhoneAtmVpiEntryAn entry based on ifIndex/vpi (which resolves to a
particular shelf/slot/port/subport/type/vpi) which
contains the maximum VCI value and the switch mode
(either vp or vc switched) for a particular VPI. ZhoneAtmVpiEntry .1.3.6.1.4.1.5504.4.2.2.9.1 |
zhoneAtmVpiMaxVciFor the selected VPI, this value contains the maximum
VCI.
For vp switched VPIs, this value must be zero.
For vc switched VPIs, this value must be a power of 2
with its maximum value being hardware dependent.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.9.1.1 |
zhoneAtmVpiSwitchedFor the selected VPI, this value can be set to either
vp switched or vc switched.
If it is vp switched, then the max vci must be zero.
If it is vc switched, the max vci value must be a
power of 2 with its maximum value being hardware
dependent.rw Enumeration .1.3.6.1.4.1.5504.4.2.2.9.1.2 |
zhoneAtmVpiRowStatusRow Status only supports create-and-go and destroy actions.
Returns active if row is in service.rw ZhoneRowStatus (Zhone-TC) .1.3.6.1.4.1.5504.4.2.2.9.1.3 |
zhoneAtmVpiOamF4PingThis is used to send a OAM F4 loopback cell for fault detection.
The value will automatically revert to disabled after the set
is complete. The valid values are:
* disabled - OAM F4 loopback cell is not being sent. This is the default.
* endToEnd - This option uses standard OAM fault management cells as
defined in ITU.610 for fault detection. Setting this will
send a OAM F4 end-to-end loopback cell to be sent
* segment - This is not supported at this timerw Enumeration .1.3.6.1.4.1.5504.4.2.2.9.1.4 |
zhoneAtmVpiOamF4PingStatusTRUE if ping was successfull and FALSE if failed.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.4.2.2.9.1.5 |
zhoneAtmVpiMaxVciPerVpIf vp-switched, but VG connection is vc-switched,
this specifies max number of vci on gateway.rw Integer32 .1.3.6.1.4.1.5504.4.2.2.9.1.6 |
atmVpiVPI used for traps defined under atm trapsro AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.5504.4.2.2.10 |
atmVciVCI used for traps defined under atm trapsro AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.5504.4.2.2.11 |
atmVpiAutoCreateDoneIndicates automatic Vpi generation complete.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5504.4.2.2.12 |
atmVpiAutoCreateCountThis value is the count of the number of auto-created Vpis.ro Integer32 .1.3.6.1.4.1.5504.4.2.2.13 |
atmVclToMulticastMap OBJECT IDENTIFIER .1.3.6.1.4.1.5504.4.2.2.16 |
atmVclToMulticastMapIndexNextThis object contains an appropriate value to be used
for atmMulticastAddressVclMapIndex when creating
entries in the atmMulticastAddressVclMapTable. The
value 0 indicates that no unassigned entries are
available. To obtain the atmMulticastAddressVclMapIndex
value for a new entry, the manager issues a management
protocol retrieval operation to obtain the current value
of this object. After each retrieval, the agent should
modify the value to the next unassigned index.
After a manager retrieves a value the agent will
determine through its local policy when this index
value will be made available for reuse.ro INTEGER .1.3.6.1.4.1.5504.4.2.2.16.1 |
atmVclToMulticastMapTableThe Multicast Address to Vcl Mapping table. Each
entry in this table associates a multicast address
representing a video stream with a Vcl. All of the
entries in this table are assumed to be unique, not
only in terms of index, but in terms of (index,
multicast address) <-> (ifIndex, vpi, vci).
Note that the Vcl type for this table should always
be 'other', denoting cell relay pass-through. We
are not terminating the IP stream on the MALC.
Also note that the Vcls that this table refer to
are the ones originating at the Video Head-End,
coming into the MALC Uplink card. SEQUENCE OF AtmVclToMulticastMapEntry .1.3.6.1.4.1.5504.4.2.2.16.2 |
atmVclToMulticastMapEntryAn entry in the Multicast Address to Vcl Mapping table.
This entry is used to associate a multicast address with
a Vcl.
Step-wise Procedures to set up a Multicast Vcl Mapping profile
Once the Vcl that carries the video stream is created, the
following steps are taken to provision a Multicast Address
to Vcl Mapping:
(1) The manager obtains a unique atmMulticastAddressVclMapIndex
by reading the atmMulticastAddressVclMapIndexNext object.
(2) Next, the manager creates a row in the
atmMulticastAddressVclMapTable by setting
atmMulticastAddressVclMapRowStatus to createAndGo.
The agent checks the sanity of the Vcl, domain index,
and multicast address. The row creation fails if:
- the specified Vcl does not exist,
- the specified Vcl is not of the correct type for
multicasting,
- the routing domain index is outside of the supported range,
- the multicast address is not of the correct format.
(3) The manager promotes the row in the
atmMulticastAddressVclMapTable when the 'set' completes. AtmVclToMulticastMapEntry .1.3.6.1.4.1.5504.4.2.2.16.2.1 |
atmVclToMulticastMapIndexA unique value to identify this Multicast Address to
Vcl mapping. INTEGER .1.3.6.1.4.1.5504.4.2.2.16.2.1.1 |
atmVclToMulticastMapRoutingDomainRouting domain of the Head-End video server.rw INTEGER .1.3.6.1.4.1.5504.4.2.2.16.2.1.2 |
atmVclToMulticastMapMulticastAddressMulticast IP address contained in the MPEG2 video stream.rw IpAddress .1.3.6.1.4.1.5504.4.2.2.16.2.1.3 |
atmVclToMulticastMapIfIndexThe ifIndex value of the ATM interface for the Vcl
carrying a video stream.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.5504.4.2.2.16.2.1.4 |
atmVclToMulticastMapVpiThe VPI value of the ATM interface for the Vcl
carrying a video stream.rw AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.5504.4.2.2.16.2.1.5 |
atmVclToMulticastMapVciThe VCI value of the ATM interface for the Vcl
carrying a video stream.rw AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.5504.4.2.2.16.2.1.6 |
atmVclToMulticastMapRowStatusRow status of the multicast address to Vcl table entry.
This object must be initially set to 'createAndGo'.rw ZhoneRowStatus (Zhone-TC) .1.3.6.1.4.1.5504.4.2.2.16.2.1.7 |
zhoneAtmPonExtTableThis is the Zhone extension to the Atm Vcl Table (rfc2515.)
It contains APON-related objects.deprecated SEQUENCE OF ZhoneAtmPonExtEntry .1.3.6.1.4.1.5504.4.2.2.17 |
zhoneAtmPonExtEntryThis is an entry in the Atm PON Extension table.deprecated ZhoneAtmPonExtEntry .1.3.6.1.4.1.5504.4.2.2.17.1 |
zhoneAtmVclPonTrafficContainerIndexThis field is an index into the ATM PON Traffic Container table.
It associated a Vcl with a Traffic Container, and is used to
retrieve PON channel provisioning information.rwdeprecated Integer32 .1.3.6.1.4.1.5504.4.2.2.17.1.1 |
zhoneAtmVplPonExtTableThis is the Zhone extension to the Atm Vpl Table (rfc2515.)
It contains APON-related objects.deprecated SEQUENCE OF ZhoneAtmVplPonExtEntry .1.3.6.1.4.1.5504.4.2.2.18 |
zhoneAtmVplPonExtEntryThis is an entry in the Atm PON Extension table.deprecated ZhoneAtmVplPonExtEntry .1.3.6.1.4.1.5504.4.2.2.18.1 |
zhoneAtmVplPonTrafficContainerIndexThis field is an index into the ATM PON Traffic Container table.
It associated a Vpl with a Traffic Container, and is used to
retrieve PON channel provisioning information.rwdeprecated Integer32 .1.3.6.1.4.1.5504.4.2.2.18.1.1 |
zhoneAtmInterfaceTcExtTableThis table contains ATM interface TC
Sublayer parameters and state variables,
one entry per ATM interface port. SEQUENCE OF ZhoneAtmInterfaceTcExtEntry .1.3.6.1.4.1.5504.4.2.2.19 |
zhoneAtmInterfaceTcExtEntryThis list contains TC Sublayer parameters
and state variables at the ATM interface and is
indexed by the ifIndex value of the ATM interface. ZhoneAtmInterfaceTcExtEntry .1.3.6.1.4.1.5504.4.2.2.19.1 |
zhoneAtmInterfaceNCDEventsThe number of times the Near-end No Cell Delineation (NCD) events occur.ro Counter32 .1.3.6.1.4.1.5504.4.2.2.19.1.1 |
zhoneAtmInterfaceHECEventsThe number of times Near-end Header Error Control (HEC) violations
occur.ro Counter32 .1.3.6.1.4.1.5504.4.2.2.19.1.2 |
zhoneAtmInterfaceFeOCDEventsThe number of times Far-end Out of Cell Delineation (OCD) events occur.ro Counter32 .1.3.6.1.4.1.5504.4.2.2.19.1.3 |
zhoneAtmInterfaceFeNCDEventsThe number of times Far-end No Cell Delineation (NCD) events
occur.ro Counter32 .1.3.6.1.4.1.5504.4.2.2.19.1.4 |
zhoneAtmInterfaceFeHECEventsThe number of times Far-end Header Error Control (HEC) violations
occur.ro Counter32 .1.3.6.1.4.1.5504.4.2.2.19.1.5 |
zhoneAtmVcCrossConnectExtTableThis Table contains Atm Vc Cross Connect Extensions
to the atmVcCrossConnectEntry. SEQUENCE OF ZhoneAtmVcCrossConnectExtEntry .1.3.6.1.4.1.5504.4.2.2.20 |
zhoneAtmVcCrossConnectExtEntryThis list contains Atm Vc Cross Connect Extensions
to the atmVcCrossConnectEntry. ZhoneAtmVcCrossConnectExtEntry .1.3.6.1.4.1.5504.4.2.2.20.1 |
zhoneAtmVcCrossConnectExtHandleIdAn administratively-assigned name for the
Atm Vc Cross Connect indicated by the INDEX
value.rw OCTET STRING .1.3.6.1.4.1.5504.4.2.2.20.1.1 |
comAtmExtensionThis is the Zhone module identifier for the Zhone ATM
MIB extension module. MODULE-IDENTITY .1.3.6.1.4.1.5504.6.25 |