Home/Catalog/Zhone-GPON-MIB

Zhone-GPON-MIB

This is the Zhone GPON mib which contains SNMP objects for GPON ONU configuration, alarms, and status.It also includes the GPON OLT status information.
Main OID:
zhoneGponOltMIB.1.3.6.1.4.1.5504.6.111
373
Objects
Active
Status
6
Dependencies

Imported Objects

IF-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC
Zhone
Zhone-TC

Objects

373 total
Object Name
zhoneGponObjectID
OBJECT IDENTIFIER
.1.3.6.1.4.1.5504.5.14.1
zhoneGponOltConfigTableConfiguration parameters that apply to one OLT. This profile is auto-created.
SEQUENCE OF ZhoneGponOltConfigEntry
.1.3.6.1.4.1.5504.5.14.1.1
zhoneGponOltConfigEntryOne row of the gpon olt config entry table.
ZhoneGponOltConfigEntry
.1.3.6.1.4.1.5504.5.14.1.1.1
zhoneGponOltIfIndexThe ifIndex of the physical olt interface.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.5504.5.14.1.1.1.1
zhoneGponOltConfigMaxRtPropagationDelayMaximum round trip propagation delay. Combined with max ONU response time and preassigned delay determins maximum logical PON distance. Default 200 usec for 20 dm.rw
Integer32 UNITS "usec"
.1.3.6.1.4.1.5504.5.14.1.1.1.2
zhoneGponOltConfigMaxOnuResponseTimeCombined with max rt propagation delay, determins maximum logical PON distance.rw
Integer32 UNITS "usec"
.1.3.6.1.4.1.5504.5.14.1.1.1.3
zhoneGponOltConfigPreassignedEqDCombined with max rt propagation delay and max onu response time determines max logical PON distance.rw
Integer32 UNITS "usec"
.1.3.6.1.4.1.5504.5.14.1.1.1.4
zhoneGponOltConfigLosAlphaNumber of loss-of-signal occurrences to trigger alarm.rw
Integer32
.1.3.6.1.4.1.5504.5.14.1.1.1.5
zhoneGponOltConfigLofAlphaNumber of loss-of-frame occurrences to trigger alarm.rw
Integer32
.1.3.6.1.4.1.5504.5.14.1.1.1.6
zhoneGponOltConfigLoamAlphaNumber of loss-of-OAM occurrences to trigger alarm.rw
Integer32
.1.3.6.1.4.1.5504.5.14.1.1.1.7
zhoneGponOltConfigScramblerDescription.rw
ZhoneEnabledFlag (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.1.1.8
zhoneGponOltConfigFecModeEnables or disables forward error correction.rw
ZhoneEnabledFlag (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.1.1.9
zhoneGponOltConfigAutoLearnEnable or disable password auto-learn mode.rw
ZhoneEnabledFlag (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.1.1.10
zhoneGponOltConfigPowerLevelOlt power level. For the Broadlight 3000, values will be rounded down to one of 0, 3, or 6.rw
Unsigned32 UNITS "db"
.1.3.6.1.4.1.5504.5.14.1.1.1.11
zhoneGponOltConfigGuardBitCountNumber of guard bits for upstream transmission.rw
Integer32 UNITS "bits"
.1.3.6.1.4.1.5504.5.14.1.1.1.12
zhoneGponOltConfigDbaModeWorking DBA mode.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.1.1.13
zhoneGponOltConfigGemBlockSizeBasic unit in bytes used by all ONUs for DBA reports of their queue occupancy (for piggyback and whole-report DBA only).rw
Integer32 UNITS "bytes"
.1.3.6.1.4.1.5504.5.14.1.1.1.14
zhoneGponOltConfigUsBerIntervalInterval for upstream bit error rate calculation.rw
Integer32 UNITS "msec"
.1.3.6.1.4.1.5504.5.14.1.1.1.15
zhoneGponOltConfigDsBerIntervalInterval used for downstream bit error rate calculation.rw
Integer32 UNITS "msec"
.1.3.6.1.4.1.5504.5.14.1.1.1.16
zhoneGponOltConfigBerSfThresholdThreshold is 10**(-N) for signal fail.rw
Integer32
.1.3.6.1.4.1.5504.5.14.1.1.1.17
zhoneGponOltConfigBerSdThresholdThreshold is 10**(-N) for signal degrade. Must exceed sf threshold.rw
Integer32
.1.3.6.1.4.1.5504.5.14.1.1.1.18
zhoneGponOltConfigFecRequestIndicates whether OLT turns on FEC indication for all Alloc-Id in the Upstream Bandwidth Map.rw
ZhoneEnabledFlag (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.1.1.19
zhoneGponOltConfigKeyExchangeSpecifies whether Single Key exchange should be performed during ONU activation process.rw
ZhoneEnabledFlag (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.1.1.20
zhoneGponOltConfigMinRtPropagationDelayIf closest ONU location is known, GPON_stack uses this value in order to limit the size of the quiet zone.rw
Integer32 UNITS "usec"
.1.3.6.1.4.1.5504.5.14.1.1.1.21
zhoneGponOltConfigMinOnuResponseTimeGPON_stack uses this value in order to limit the size of the quiet zone.rw
Integer32 UNITS "usec"
.1.3.6.1.4.1.5504.5.14.1.1.1.22
zhoneGponOltConfigEqDMeasureCyclesDefines the number of measurement cycles in the Ranging process.rw
Integer32
.1.3.6.1.4.1.5504.5.14.1.1.1.23
zhoneGponOltConfigDriftControlIntervalDefines the interval of periodic monitoring on drifts of upstream data.rw
Integer32 UNITS "msec"
.1.3.6.1.4.1.5504.5.14.1.1.1.24
zhoneGponOltConfigDriftControlLimitIndicates the limit of upstream data drift.rw
Integer32 UNITS "bits"
.1.3.6.1.4.1.5504.5.14.1.1.1.25
zhoneGponOltConfigAllocCycleLengthAlloc-ID assignment map cycle length.rw
Integer32
.1.3.6.1.4.1.5504.5.14.1.1.1.26
zhoneGponOltConfigMinUsAllocSize of minimal upstream allocation per frame.rw
Integer32 UNITS "bytes"
.1.3.6.1.4.1.5504.5.14.1.1.1.27
zhoneGponOltConfigAckTimeoutTimeout length of Acknowledge message.rw
Integer32 UNITS "msec"
.1.3.6.1.4.1.5504.5.14.1.1.1.28
zhoneGponOltConfigPlsMaxAllocSizeIndecates a size of unassigned allocation that should be attached to the end of ranging window.rw
Integer32 UNITS "bytes"
.1.3.6.1.4.1.5504.5.14.1.1.1.29
zhoneGponOltConfigDbaCycleThe Dynamic Bandwidth Allocation(dba) cycle determines the DBA interval size. Its an integer multiplicant of 2 milli seconds. The range of values for the dba cycle can be between 2ms-10ms.rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.1.1.30
zhoneGponOltConfigSrDbaReportingBlockSizeFor DBA of SR type, the block size defines the resolution of the status reports per PON link.The default value is 48 bytes.rw
Unsigned32 UNITS "bytes"
.1.3.6.1.4.1.5504.5.14.1.1.1.31
zhoneGponOltConfigProtectionSwitchoverTimerIf we receive LOS alarm for a link in Active state, the link state changes to Switch Over Pending state. If the actual switch-over does not happen after this protection-switchover-timeout expires, the link will go back to Active staterw
Unsigned32 UNITS "msec"
.1.3.6.1.4.1.5504.5.14.1.1.1.32
zhoneGponOltConfigPreambleOverrideUsed to force the OLT to use the Preamble configuration in the OLT configuration profile. Otherwise the Preamble configuration will be determined at runtime and based on the SFP.rw
ZhoneEnabledFlag (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.1.1.33
zhoneGponOltConfigPreambleType0Byte number for preamble type 0. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..frw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.1.1.34
zhoneGponOltConfigPreambleType1Byte number for preamble type 1. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..frw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.1.1.35
zhoneGponOltConfigPreambleType3PreRangeByte number for preamble type 3 pre-ranging. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..frw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.1.1.36
zhoneGponOltConfigPreambleType3PostRangeByte number for preamble type 3 post-ranging. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..frw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.1.1.37
zhoneGponOltConfigPreambleType3PatternPreamble type 3 pattern. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..frw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.1.1.38
zhoneGponOltConfigBipErrorMonitoringIf in disabled mode, do not report BIP errors, do not disable ONU and do not throw any traps. If in monitorOnly mode, monitor BIP errors and if BIP Error Threshold exceeded, set appropriate zhoneGponOnuStatusWord bits based on the type of BIP errors and throw zhoneGponOnuError trap. If in blockOnError mode, monitor BIP errors and if BIP Error Threshold exceeded, block traffic, disable ONU ranging, set appropriate zhoneGponOnuStatusWord bits based on the type of BIP errors, and throw zhoneGponOnuError and linkDownTrap traps.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.1.1.39
zhoneGponOltConfigBipErrorsPerSampleThresholdIf the number of BIP errors per sample exceeds this threshold, it is counted as an errored sample.rw
Integer32
.1.3.6.1.4.1.5504.5.14.1.1.1.40
zhoneGponOltConfigBipErroredSamplesThresholdIf the number of errored samples exceed this sample threshold, report and disable the onu if in blockOnError mode, otherwise simply report the threshold as being exceeded.rw
Integer32
.1.3.6.1.4.1.5504.5.14.1.1.1.41
zhoneGponOltConfigBipMaxSampleGapIf two adjancent errored samples were taken farther apart than this threshold, do not count the earlier sample as an errored sample.rw
Integer32
.1.3.6.1.4.1.5504.5.14.1.1.1.42
zhoneGponOltConfigRogueOnuDetectionControls detection of rogue ONU on fiber. Values are: 1. detection disabled 2. detect via measurement from rssi process 3. detect via indication from background process. 4. normally off, but switch to rssi mode if rogue is suspected.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.1.1.43
zhoneGponOltConfigRogueOnuDetectFrequencyFrequency in seconds for detection background task.rw
Integer32
.1.3.6.1.4.1.5504.5.14.1.1.1.44
zhoneGponOltConfigRogueOnuRxPowerThresholdPower level below which to report rssi rogue ONU.rw
Integer32
.1.3.6.1.4.1.5504.5.14.1.1.1.45
zhoneGponOltOnuConfigTableConfiguration parameters applying to a single onu stacked on an olt. This profile is auto-created.
SEQUENCE OF ZhoneGponOltOnuConfigEntry
.1.3.6.1.4.1.5504.5.14.1.2
zhoneGponOltOnuConfigEntryA row in the gpon olt-onu config table.
ZhoneGponOltOnuConfigEntry
.1.3.6.1.4.1.5504.5.14.1.2.1
zhoneGponOltOnuIfIndexIfIndex of the onu interface stacked on the olt.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.5504.5.14.1.2.1.1
zhoneGponOltOnuConfigSerialNoVendorIdThis is a string of 4 ascii characters representing the vendor ID portion of the onu serial number. Example: 'ZNTS' for Zhone.rw
ZhoneAdminString
.1.3.6.1.4.1.5504.5.14.1.2.1.2
zhoneGponOltOnuConfigSerialNoVendorSpecificThis is a string of ascii decimal digits representing the vendor-specific portion of the onu serial number.rw
ZhoneAdminString
.1.3.6.1.4.1.5504.5.14.1.2.1.3
zhoneGponOltOnuConfigPasswordPassword (10 bytes).rw
ZhoneAdminString
.1.3.6.1.4.1.5504.5.14.1.2.1.4
zhoneGponOltOnuConfigAutoLearnIndicates whether password is auto-learned.rw
ZhoneEnabledFlag (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.2.1.5
zhoneGponOltOnuConfigPowerLevelOlt power level. For the Broadlight 3000, values will be rounded down to one of 0, 3, or 6.rw
Integer32 UNITS "db"
.1.3.6.1.4.1.5504.5.14.1.2.1.6
zhoneGponOltOnuConfigUsBerIntervalInterval for upstream bit error rate calculation.rw
Integer32 UNITS "msec"
.1.3.6.1.4.1.5504.5.14.1.2.1.7
zhoneGponOltOnuConfigDsBerIntervalInterval for downstream bit error rate.rw
Integer32 UNITS "msec"
.1.3.6.1.4.1.5504.5.14.1.2.1.8
zhoneGponOltOnuConfigOnuAddedIndicates to Broadlight that onu is activated. May not be used.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5504.5.14.1.2.1.9
zhoneGponOltOnuConfigOmciFileNameName of OMCI configuration file for this ONT.rw
ZhoneAdminString (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.2.1.10
zhoneGponOltOnuConfigMEProfileNameThis is the name of a Profile that contains OMCI commands which can configure an ONU. It is expected that this Profile contain OMCI commands that configure the Managed Entities (ME) on an ONU.rw
ZhoneAdminString (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.2.1.11
zhoneGponOltOnuConfigGenericProfileNameThis is the name of a Profile that contains OMCI commands which can configure an ONU. It is expected that this Profile contain generic commands that are common to multiple ONUs.rw
ZhoneAdminString (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.2.1.12
zhoneGponOltOnuConfigPhysicalTrapsIf enabled, then an asynchronous notification from the ONT with ME class ONT-G triggers an omciOnuAlarms trap. The alarm conditions for this ME class are: equipment alarm, powering alarm, battery missing, battery failure, battery low, physical intrusion alarm, and self-test failure.rw
ZhoneEnabledFlag (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.2.1.13
zhoneGponOltOnuConfigOntTrapsIf enabled, then an asynchronous notification from the ONT with ME class other than ONT-G triggers an omciOnuAlarms trap.rw
ZhoneEnabledFlag (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.2.1.14
zhoneGponOltOnuConfigLineStatusTrapsIf enabled, then gponOnuLineStatusChange traps, and also LinkUp/LinkDown traps, are sent whenever line status changes between up and down. If disabled, none of these traps is sent. If auto, then line status traps are sent if the 'dying gasp' flag is on (for line down), or if the 'dying gasp' flag was on (for line up). Link down/up traps are not sent.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.2.1.15
zhoneGponOltOnuConfigAutoUpgradeIf enabled, then the ONU s/w will be upgraded if the ONU version does not match the assoicated remote upgrade profile. Changing this variable to disabled will not abort a remote software upgrade already in progress.rw
ZhoneEnabledFlag (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.2.1.16
zhoneGponOltOnuConfigSerialNoVendorSpecificFsanThis is a string of ascii decimal digits representing the vendor-specific portion of the onu serial number in hex format ( FSAN ).rw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.2.1.17
zhoneGponOltOnuConfigUseRegIdIf enabled, and if the onu is activated, then when an ONT is discovered with a registration ID that matches this ONU's password field, then the ONU will be auto-assigned to that ONT.rw
ZhoneEnabledFlag (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.2.1.18
zhoneGponOltOnuConfigModelModel ID returned from this Onu.ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.2.1.19
zhoneGponOltOnuConfigOntVersionThis object defines the version of the ONT as defined by the vendor. The character value '0' indicates that the version information is not available or applicable.ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.2.1.20
zhoneGponOltOnuConfigImageVersionActiveVersion information for the active s/w image.ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.2.1.21
zhoneGponOltOnuConfigImageVersionStandbyVersion information for the standby s/w image.ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.2.1.22
zhoneGponOltOnuConfigUsRxPowerMonitoringIf in disabled mode, do not report Upstream Onu Rx Power errors, do not disable ONU and do not throw any traps. If in monitorOnly mode, monitor Upstream Onu Rx Power levels and if level is outside of thresholds, set appropriate zhoneGponOnuStatusWord bits and throw zhoneGponOnuError trap. If in blockOnError mode, monitor Upstream Onu Rx Power levels and if level is outside of thresholds, block traffic, disable ONU ranging, set appropriate zhoneGponOnuStatusWord bits and throw both zhoneGponOnuError and linkDownTrap traps.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.2.1.23
zhoneGponOltOnuConfigUsRxPowerHighThresholdUpstream Receive Power High Threshold value.rw
Integer32 UNITS "dBm"
.1.3.6.1.4.1.5504.5.14.1.2.1.24
zhoneGponOltOnuConfigUsRxPowerLowThresholdUpstream Receive Power Low Threshold value.rw
Integer32 UNITS "dBm"
.1.3.6.1.4.1.5504.5.14.1.2.1.25
zhoneGponOltOnuConfigDbaStatusReportingThere are two types of DBA, Status Reporting and Non Status Reporting. The value is enabled or disabled. The default is disabled.rw
ZhoneEnabledFlag (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.2.1.26
zhoneGponOltOnuConfigOmciDataSyncIf the MIB data sync value returned from the ONU on a MIB audit matches the MXK value, config not required.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.2.1.27
zhoneGponOltOnuConfigSnmpDataSyncIf the SNMP provisioning change value returned from the CPE matches the MXK value, config not required.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.2.1.28
zhoneGponOltOnuConfigNextAvailableGemPortNext available GEM PORT for the ONU.ro
Integer32
.1.3.6.1.4.1.5504.5.14.1.2.1.29
zhoneGponOltOnuConfigAutoConfigStateTrack whether the ONU has been auto-configured.ro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.2.1.30
zhoneGponOltOnuConfigLinkStatusAlarmSeverityBased on the severity set in this field LinkUp/LinkDown alarms are raised.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.2.1.31
zhoneGponPortConfigTableThe gpon port is similiar to VCLs in ATM. Data is transferred between OLT and ONU via ports. This profile is dynamically created during CLI bridge-add, host-add, interface-add commands but must be explicitly created during SNMP operation. GEM ports can be created using a supplied I/F index value or using the next available I/F index value. Since the GEM Port is a virtual device, ZMS prefers to supply the I/F index value because ZMS cannot lookup the newly created GEM port using shelf/slot/olt/port indexing ( virual devices do not support these values). How to create a GEM port using next available I/F Index value, using a single SNMP packet with multiple var-binds: 1. Do an SNMP-Next of the object ifIndexNext to determine the I/F index value of the new GEM port. The SNMP-Next will not result in the auto-increment of ifIndexNext. 2. Issue single SNMP set command containing the following: zhoneGponPortConfigRowStatus.1 = create zhoneGponPortConfigRowShelf.1 = 1 zhoneGponPortConfigRowSlot.1 = GEM port slot zhoneGponPortConfigRowOlt.1 = GEM port OLT zhoneGponPortConfigRowPort.1 = GEM Port ID value zhoneGponPortConfigRowTrafficProfile.1 = traffic profile The GEM port will be created using the next available ifIndex. How to create a GEM port with a specified I/F index value, using a single SNMP packet with multiple var-binds: 1. Do an SNMP-Get of the object ifIndexNext to determine the next available I/F index value. The SNMP-Get will result in the auto-increment of ifIndexNext. 2. Issue single SNMP set command containing the following: zhoneGponPortConfigRowStatus.aaa = create zhoneGponPortConfigRowShelf.aaa = 1 zhoneGponPortConfigRowSlot.aaa = GEM port slot zhoneGponPortConfigRowOlt.aaa = GEM port OLT zhoneGponPortConfigRowPort.aaa = GEM Port ID value zhoneGponPortConfigRowTrafficProfile.aaa = traffic profile where aaa is the I/F index value collected in step 1. A GEM Port cannot be created if an I/F translate record already exists using the supplied I/F index value. How to delete a GEM port using a single SNMP packet: 1. Determine I/F index of GEM port config profile (aaa) 2. Issue single SNMP set command containing the following: zhoneGponPortConfigRowStatus.aaa = destroy Special Notes: 1. The deletion of a GEM port will be prevented if the GEM port supports bridges, interfaces, etc. 2. The GEM port ID value determines the GEM port ONU.
SEQUENCE OF ZhoneGponPortConfigEntry
.1.3.6.1.4.1.5504.5.14.1.3
zhoneGponPortConfigEntryA row in the gpon port config table.
ZhoneGponPortConfigEntry
.1.3.6.1.4.1.5504.5.14.1.3.1
zhoneGponPortIfIndexThe ifIndex of the gpon-port interface stacked on the olt.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.5504.5.14.1.3.1.1
zhoneGponPortConfigRowStatusThe row status for the port config table.rw
ZhoneRowStatus (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.3.1.2
zhoneGponPortConfigMulticastSpecifies whether this is a multicast or unicast port. If unicast, only one onu may be given, and the unicast-onu-id field is used. If multicast is true, then the multicast-onu-ids is used to name the onus.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5504.5.14.1.3.1.3
zhoneGponPortConfigEncryptedSpecifies whether port-id PLOAM messages are encrypted. Must be false if multicast.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5504.5.14.1.3.1.4
zhoneGponPortConfigDirectionDirection of data for this port.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.3.1.5
zhoneGponPortConfigTrafficProfileIndex of GEM Port traffic profile for this port. A zero value indicates no GEM Port traffic profile has been selected.rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.3.1.6
zhoneGponPortConfigRowShelfThis is a WRITE-ONLY variable used during port create/delete operations.rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.3.1.7
zhoneGponPortConfigRowSlotThis is a WRITE-ONLY variable used during port create/delete operations.rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.3.1.8
zhoneGponPortConfigRowOltThis is a WRITE-ONLY variable used during port create/delete operations.rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.3.1.9
zhoneGponPortConfigRowPortThis is a WRITE-ONLY variable used during port create/delete operations.rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.3.1.10
zhoneGponPortConfigRowTrafficProfileThis is a WRITE-ONLY variable used during port create/delete operations.rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.3.1.11
zhoneGponPortConfigRowOnuIdThe subPort of the ONU on which this GEM port is to be stacked. This is a write-only variable during row create.rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.3.1.12
zhoneGponPortConfigTrafficManagementProfileIndexThis object points to the associated Traffic Management profile. If there is no traffic control for the GEM port, set it to 0.rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.3.1.13
zhoneGponAllocIdTableTable for management of upstream bandwidth
SEQUENCE OF ZhoneGponAllocIdEntry
.1.3.6.1.4.1.5504.5.14.1.4
zhoneGponAllocIdEntryEntry in the gpon allocId table.
ZhoneGponAllocIdEntry
.1.3.6.1.4.1.5504.5.14.1.4.1
zhoneGponAllocIdIndexAn Id number which must be unique for a given OLT.
Integer32
.1.3.6.1.4.1.5504.5.14.1.4.1.1
zhoneGponAllocIdRowStatusRow status for the gpon alloc-id table.rw
ZhoneRowStatus (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.4.1.2
zhoneGponAllocIdOnuIdThe onu number for this olt to which we are allocating bandwidth. Cannot be greater than number of onus for the olt. This field cannot be changed once the alloc-id has been created.rw
Integer32
.1.3.6.1.4.1.5504.5.14.1.4.1.3
zhoneGponAllocIdGuaranteedBwBandwidth guaranteed by this alloc-id. This value is specified in kilobits per second. Only multiples of 512 are allowed, and the value may not exceed 2621440 (i.e. 2.5 gigabits per second).rw
Integer32 UNITS "kilobits"
.1.3.6.1.4.1.5504.5.14.1.4.1.4
zhoneGponAllocIdTrafficClassWhether traffic is Constant Bit Rate or Unspecified Bit Rate.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.4.1.5
zhoneGponAllocIdCompensatedFor CBR, indicates whether compensated.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5504.5.14.1.4.1.6
zhoneGponSerialNoTableTable of discovered serial numbers available for assignment to onus.
SEQUENCE OF ZhoneGponSerialNoEntry
.1.3.6.1.4.1.5504.5.14.1.5
zhoneGponSerialNoEntryRow in the Gpon onu serial number table
ZhoneGponSerialNoEntry
.1.3.6.1.4.1.5504.5.14.1.5.1
zhoneGponSerialNoOltLgIfIndexLinegroup ifIndex of the Olt on which serial number was discovered.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.5504.5.14.1.5.1.1
zhoneGponSerialNoIndexIdAn identifying number, unique within olt, for this discovered onu serial number.
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.5.1.2
zhoneGponSerialNoVendorIdThe 4-character vendor id portion of serial number.ro
ZhoneAdminString
.1.3.6.1.4.1.5504.5.14.1.5.1.3
zhoneGponSerialNoVendorSpecificVendor specific portion of the unassigned onu serial number, a string of decimal digits.rw
ZhoneAdminString
.1.3.6.1.4.1.5504.5.14.1.5.1.4
zhoneGponSerialNoTimeStampTime, as ascii string, that the serial number was discovered.ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.5.1.5
zhoneGponTrapPrefixPlace-holder object for gpon traps, which must have a final digit of 0 in OID.
OBJECT IDENTIFIER
.1.3.6.1.4.1.5504.5.14.1.6
zhoneGponTrapsTraps raised by Gpon Rp.
OBJECT IDENTIFIER
.1.3.6.1.4.1.5504.5.14.1.6.0
zhoneGponSerialNumberFoundNotification that an ONU serial number has been discovered.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5504.5.14.1.6.0.1
zhoneGponSerialNumberLostNotification that a previously discovered ONU serial number is no longer available.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5504.5.14.1.6.0.2
zhoneGponOnuLineStatusChangeDescription.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5504.5.14.1.6.0.3
zhoneGponOmciOnuAlarmsTrapCurrent active alarms for an ONU entity. Alarms contained in the trap bindings will be for only one specific entity. If an entity alarm is not contained in the trap bindings then the alarm is either not active, not enabled, or not supported. If there are no alarms for the entity, then there will only be one alarm in the trap bindings and that alarm will have a value of zero and the alarm string will be 'None'.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5504.5.14.1.6.0.4
zhoneGponOmciOnuDownloadStatusChangeTrap will be raised for Image Download status changes.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5504.5.14.1.6.0.5
zhoneGponOltOpticsAlarmsTrapRaised when SFP reports optics alarms condition for an SFP.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5504.5.14.1.6.0.6
zhoneGponOnuErrorOne of the ONU error conditions is present for the specified ONU. Report zhoneGponOnuStatusWord to indicate which error has occurred.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5504.5.14.1.6.0.7
zhoneGponRogueOnuTrapA rogue ONU has been detected on this OLT by the background process
NOTIFICATION-TYPE
.1.3.6.1.4.1.5504.5.14.1.6.0.8
zhoneGponRssiRogueOnuTrapRogue ONU has been detected by RSSI process on this OLT.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5504.5.14.1.6.0.9
zhoneGponOltStatusWordTrapChange in one of the gpol olt status word bits has been detected.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5504.5.14.1.6.0.10
zhoneGponOnuAutoAssignNotification that an ONU ID has been auto assigned.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5504.5.14.1.6.0.11
zhoneGponOnuStatusTableCurrent status of onu as reported from Gpon driver.
SEQUENCE OF ZhoneGponOnuStatusEntry
.1.3.6.1.4.1.5504.5.14.1.7
zhoneGponOnuStatusEntryRow in the zhoneGponOnuStatusTable.
ZhoneGponOnuStatusEntry
.1.3.6.1.4.1.5504.5.14.1.7.1
zhoneGponOnuStatusWordBit-encoded current onu status from gpon driverro
Bits
.1.3.6.1.4.1.5504.5.14.1.7.1.1
zhoneGponOnuOmciStateCurrent configuration status for ONU. 1. queued for configuration (waiting) 2. transitional state before configuration (pending) 3. in process of configuration (config) 4. unspecified error (error) 5. configuration successful (done) 6. image download in progress (download) 7. image download aborted (aborted) 8. state cannot be determined (unknown) 9. ONU is down (down) 10. no configuration has been attempted (noConfig) 11. ONU unreachable for RG configuration (rgComError) 12. Some RG commands failed, may impact service (rgServiceSetupErr) 13. OMCI configuration failed (omciFailed) 14. OMCI failed and also ONU unreachable for RG (omciErrAndRgComErr) 15. OMCI failed and also RG commands failed (omciErrAndRgServErr) 16. Some post-config commands failed (postCfgError) 17. OMCI failed and also some post-config commands failed (omciErrAndPostCfgErr)ro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.7.1.2
zhoneGponOnuOpticRssiRSSI power of the SFP per ONU. The value is in tenths of dB.ro
Integer32 (-600..200) UNITS "tenths of dB"
.1.3.6.1.4.1.5504.5.14.1.7.1.3
zhoneGponOntRxPowerRx Power as reported by the ONT. The value is in tenths of dB.ro
Integer32 (-600..200) UNITS "tenths of dB"
.1.3.6.1.4.1.5504.5.14.1.7.1.4
zhoneGponOntVersionThis object defines the version of the ONT as defined by the vendor. The character value '0' indicates that the version information is not available or applicable.ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.7.1.5
zhoneGponOnuDistanceDistance from Olt to Ont in meters, as computed from Eqd.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.7.1.6
zhoneOnuOmciMEProfileTableTable containing the OMCI commands for the Managed Entities (ME) on an ONU. The following 'how to' examples demonstrate access of the object zhoneOnuOmciMEOmciCommands. How to create ME profile: 1. Determine ME profile instance <aaa> 2. Place file <filename> into uplink file system 3. Issue single SNMP set command containing the following: zhoneOnuOmciMEProfileRowStatus.aaa = create zhoneOnuOmciMEProfileName.aaa = ME profile name zhoneOnuOmciMEProfileFilename.aaa = <filename> How to update existing ME profile from a file: 1. Determine ME profile instance <aaa> 2. Place file <filename> into uplink file system 3. Issue single SNMP set command containing the following: zhoneOnuOmciMEProfileRowStatus.aaa = import zhoneOnuOmciMEProfileName.aaa = ME profile name zhoneOnuOmciMEProfileFilename.aaa = <filename> How to extract ME profile into a file: 1. Determine ME profile instance <aaa> 2. Issue single SNMP set command containing the following: zhoneOnuOmciMEProfileRowStatus.aaa = export zhoneOnuOmciMEProfileFilename.aaa = <filename> 3. The file <filename> now exists on uplink file system How to delete ME profile: 1. Determine ME profile instance <aaa> 2. Issue single SNMP set command containing the following: zhoneOnuOmciMEProfileRowStatus.aaa = destroy
SEQUENCE OF ZhoneOnuOmciMEProfileEntry
.1.3.6.1.4.1.5504.5.14.1.8
zhoneOnuOmciMEProfileEntryRow in the ME Profile table.
ZhoneOnuOmciMEProfileEntry
.1.3.6.1.4.1.5504.5.14.1.8.1
zhoneOnuOmciMEProfileIndexA unique index for each row entry (1..n).
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.8.1.1
zhoneOnuOmciMEProfileRowStatusRow status for the Me profile entry. Not really used for the configuration on the ONUsrw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.8.1.2
zhoneOnuOmciMEProfileNameName given to each row entry in the ME Profile table. The name must contain ascii printable characters and cannot contain blanks or forward-slash characters. The name must be null-terminated and the null character is included in the object data length. The name must be unique in the ME profiles.rw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.8.1.3
zhoneOnuOmciMEProfileOmciCommandsContains the set of OMCI commands and the variable substitutions used in configuring the ONUs. This object will go through some character substitution before being inserted into the database so the maximum string size will not be available. Available string size will vary based on string contents but expect about 10 percent loss. This object cannot be accessed directly. See the comments section for zhoneOnuCmciMEProfileTable on how to acces this object.rw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.8.1.4
zhoneOnuOmciMEProfileFileNameName of file to be loaded into profile. This object is write-only and is not preserved.rw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.8.1.5
zhoneOnuOmciGenericProfileTableTable containing Generic OMCI commands for an ONU. The Generic profile is 'created' from an existing ME profile. During this operation, the 'variable' defintions from the ME profile are extracted from the ME profile and placed into the Generic profile. The Generic profile is 'updated' from a file placed into the uplink's file system. The following 'how to' examples demonstrate access of the object zhoneOnuOmciGenericOmciCommands. How to create Generic profile from ME profile: 1. Determine Generic profile instance <aaa> 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = create zhoneOnuOmciGenericProfileName.aaa = profile name zhoneOnuOmciGenericProfileMESrcProfileName = ME profile source 3. Profile is now created and the profile will not contain any variables and values. How to update existing Generic profile from a file: 1. Determine Generic profile instance <aaa> 2. Place file <filename> into uplink file system 3. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = import zhoneOnuOmciGenericProfileFileName.aaa = <filename> How to extract Generic profile into a file: 1. Determine ME profile instance <aaa> 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = export zhoneOnuOmciGenericProfileFilename.aaa = <filename> 3. The file <filename> now exists on uplink file system How to delete Generic profile: 1. Determine Generic profile instance <aaa> 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = destroy
SEQUENCE OF ZhoneOnuOmciGenericProfileEntry
.1.3.6.1.4.1.5504.5.14.1.9
zhoneOnuOmciGenericProfileEntryRow in the OMCI Generic Profile table
ZhoneOnuOmciGenericProfileEntry
.1.3.6.1.4.1.5504.5.14.1.9.1
zhoneOnuOmciGenericProfileIndexA unique index for each row entry ( 1..n ).
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.9.1.1
zhoneOnuOmciGenericProfileRowStatusRow status for the Generic profile entry. Not really used for the configuration of the ONUsrw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.9.1.2
zhoneOnuOmciGenericProfileNameName given to each row entry in the Generic Profile table. The name must contain ascii printable characters and cannot contain blanks or forward-slash characters. The name must be null-terminated and the null character is included in the object data length. The name must be unique in the Generic profiles.rw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.9.1.3
zhoneOnuOmciGenericProfileOmciCommandsContains the generic set of OMCI commands and the variable substitutions used in configuring the ONUs. This object will go through some character substitution before being inserted into the database so the maximum string size will not be available. Available string size will vary based on string contents but expect about 10 percent loss.rw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.9.1.4
zhoneOnuOmciGenericProfileMESrcProfileNameName of ME profile used to create the Generic profile. The value for this object is only initialized when the profile is created.rw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.9.1.5
zhoneOnuOmciGenericProfileFileNameName of file to be loaded into profile. This object is write-only and is not preserved.rw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.9.1.6
zhoneOnuOmciSpecificProfileTableTable containing Specific OMCI commands for an ONU. The Specific profile is 'created' from existing ME and Generic profiles. During this operation, the 'variable' defintions from the ME and Generic profile are extracted from the profiles and placed into the Specific profile. The ME and Generic profile names are extracted from the ONU's Olt/Onu config profile. The Specific profile is 'updated' from a file placed into the uplink's file system. The following 'how to' examples demonstrate access of the object zhoneOnuOmciSpecificOmciCommands. How to create Specific profile from ME and Generic profiles: 1. Determine Specific profile instance <aaa> (from ONU's ifIndex) 2. Issue single SNMP set command containing the following: zhoneOnuOmciSpecificProfileRowStatus.aaa = create zhoneOnuOmciSpecificProfileFileName = <filename> 3. The profile is now created and the omciCommands contents have been placed into <filename>. The name of the ME profile used to create the Speofic profile is installed into zhoneOnuOmciSpecificProfileMESrcProfile. How to update existing Specific profile from a file: 1. Determine Specific profile instance <aaa> (from ONU's ifIndex) 2. Place file <filename> into uplink file system 3. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = import zhoneOnuOmciGenericProfileFileName.aaa = <filename> How to extract Specific profile into a file: 1. Determine Specific profile instance <aaa> (from ONU's ifIndex) 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = export zhoneOnuOmciGenericProfileFilename.aaa = <filename> 3. The file <filename> now exists on uplink file system How to delete Specific profile: 1. Determine Specific profile instance <aaa> (from ONU's ifIndex) 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = destroy
SEQUENCE OF ZhoneOnuOmciSpecificProfileEntry
.1.3.6.1.4.1.5504.5.14.1.10
zhoneOnuOmciSpecificProfileEntryRow in the OMCI Specific Profile table
ZhoneOnuOmciSpecificProfileEntry
.1.3.6.1.4.1.5504.5.14.1.10.1
zhoneOnuOmciSpecificProfileIndexA unique index for each row entry. The index value corresponds to the ifIndex of the ONU which uses this profile.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.5504.5.14.1.10.1.1
zhoneOnuOmciSpecificProfileRowStatusRow status for the Specific Profile entry. Not really used for the configuration of the ONUsrw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.10.1.2
zhoneOnuOmciSpecificProfileOmciCommandsContains the Specific set of OMCI commands and the variable substitutions used in configuring the ONUs. This object will go through some character substitution before being inserted into the database so the maximum string size will not be available. Available string size will vary based on string contents but expect about 10 percent loss.rw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.10.1.3
zhoneOnuOmciSpecificProfileMESrcProfileNameName of ME profile used to create the Specific profile. The value for this object is only initialized when the profile is created.rw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.10.1.4
zhoneOnuOmciSpecificProfileFileNameName of file to be loaded into profile. This object is write-only and is not preserved.rw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.10.1.5
zhoneGponOmciOnuAlarmsTableA table of all GPON OMCI ONU alarms.
SEQUENCE OF ZhoneGponOmciOnuAlarmsEntry
.1.3.6.1.4.1.5504.5.14.1.11
zhoneGponOmciOnuAlarmsEntryAn entry for each ONU in the zhoneGponOmciOnuAlarmsTable.
ZhoneGponOmciOnuAlarmsEntry
.1.3.6.1.4.1.5504.5.14.1.11.1
zhoneGponOmciOnuAlarmsTextThis is a long ascii string which contains the GPON OMCI ONU alarms. Each line of text in this string has the following format: aaa,bbb,ccc,'aaaStr,'bbbStr',d\n where aaa : ME classId ( numeric decimal value ) bbb : alarm index ( numeric decimal value ) ccc : entityId ( numeric decimal value ) aaaStr : string version of ME name bbbStr : string version of alarm name d : alarm severity ( 1=critical, 2=major, 3=minor, 4=warning ) The ME classId is the standard value from the 'Managed entity identifiers' table of G984.4. The alarm index is the zero-based index (G984.4 or G983.2) within the ME class. the entityId is the physical port number on the ONT. Here is a sample: 11,0,513,'PptpEthUni','LanLos',2\n 256,1,0,'OntG','PoweringAlarm',3\n If this string has zero length then there are no active alarms. If this string has a single entry with a classId of 65535 then the alarm collection failed. WARNING! In this description, replace the sinqle quote characters with double quote characters! The Zhone scripts have problems with double quote characters!ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.11.1.1
zhoneGponTrafficProfileTableA table of the GPON GEM Port Traffic profiles.
SEQUENCE OF ZhoneGponTrafficProfileEntry
.1.3.6.1.4.1.5504.5.14.1.12
zhoneGponTrafficProfileEntryRow in the zhoneGponPortTrafProfileTable.
ZhoneGponTrafficProfileEntry
.1.3.6.1.4.1.5504.5.14.1.12.1
zhoneGponTrafficProfileIndexUsed to index an entry in the GEM port traffic profile table
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.12.1.1
zhoneGponTrafficProfileRowStatusThe row status for the GEM Port Traffic profile.rw
ZhoneRowStatus (Zhone-TC)
.1.3.6.1.4.1.5504.5.14.1.12.1.2
zhoneGponTrafficProfileGuaranteedUpstreamBwBandwidth guaranteed by this alloc-id. This value is specified in kilobits per second. Only multiples of 512 are allowed, and the value may not exceed 2621440 (i.e. 2.5 gigabits per second).rw
Integer32
.1.3.6.1.4.1.5504.5.14.1.12.1.3
zhoneGponTrafficProfileClassWhether traffic is Constant Bit Rate or Unspecified Bit Rate.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.12.1.4
zhoneGponTrafficProfileCompensatedFor CBR, indicates whether compensated.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5504.5.14.1.12.1.5
zhoneGponTrafficProfileSharedTRUE if the GEM Port which uses this traffic descriptor shares and allocation ID with another GEM port. FALSE otherwise. When used more than once in the same ONU, the GEM ports are assigned the same alloc-id value.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5504.5.14.1.12.1.6
zhoneGponTrafficProfileDbaEnabledA flag to indicate if dynamic or static bandwidth allocation is used. The default value of DbaEnabled is false.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5504.5.14.1.12.1.7
zhoneGponTrafficProfileDbaFixedUsUbrBwFixed UBR bandwidth will be always allocated UBR bandwidth. The min values of Fixed Ubr bandwidth can be 0 or 128kilo bits per second.Only multiples of 64 kilobits per second are allowed.rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.12.1.8
zhoneGponTrafficProfileDbaFixedUsCbrBwFixed CBR bandwidth will be always allocated CBR bandwidth. The min value of Fixed Cbr bandwidth can be 0 or 512 kilobits per second.Only multiples of 64 kilo bits per second are allowed.rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.12.1.9
zhoneGponTrafficProfileDbaAssuredUsBwDBA Assured bandwidth will be allocated when traffic demand exists. The min value of Assured bandwidth can be 0 or 256 kilobits per second. Only multiples of 64 kilo bits per second are allowed.rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.12.1.10
zhoneGponTrafficProfileMaxUsBwThe Max Bandwidth value should be larger or equal to the sum of Fixed UBR, Fixed CBR and Assured.The increments should be done in the order of 64 kilobits per second.The default value of maximum bandwidth is 0.rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.12.1.11
zhoneGponTrafficProfileExtraUsBwTypeExtra Bandwidth = MaxBw - (Assured+FixedUbr+FixedCbr) The two Extra bandwidth types supported are : 1.nonassured 2.besteffort By default the value is nonassured.Nonassured has higher priority for getting unused bandwidth than besteffort.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.12.1.12
zhoneGponPortStatusTableCurrent status of GEM port as reported from Gpon driver.
SEQUENCE OF ZhoneGponPortStatusEntry
.1.3.6.1.4.1.5504.5.14.1.13
zhoneGponPortStatusEntryRow in the zhoneGponPortStatusTable.
ZhoneGponPortStatusEntry
.1.3.6.1.4.1.5504.5.14.1.13.1
zhoneGponPortStatusAllocIdThe current dynamic alloc-id value for the GEM port.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.13.1.1
zhoneGponPortStatusDbaStatusThe current DBA status for this GEM port. DBA status reporting is on a per-ONU basis. All GEM ports on the ONU will report the same value. Possible values: sr - DBA type is SR and there is no error nsr - DBA type is NSR and there is no error nsrError - DBA type is NSR and there is an error or the ONU does not support NSR notEnabled - DBA has been disabled notAvailable - cannot communicate with ONU notAdded - ONU is not added to the OLT error - internal error prevents data collectionro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.13.1.2
zhoneGponOmciStatsCurrentTableTable of current-interval statistics gathered via OMCI from ONT's as specified in the ME profiles used by that ONT.
SEQUENCE OF ZhoneGponOmciStatsCurrentEntry
.1.3.6.1.4.1.5504.5.14.1.14
zhoneGponOmciStatsCurrentEntryRow in zhoneGponOmciStatsCurrentTable. Each row retrieves counters for the current 15-minute interval for one managed entity on one logical port of one ONT.
ZhoneGponOmciStatsCurrentEntry
.1.3.6.1.4.1.5504.5.14.1.14.1
zhoneGponOmciStatsCurrentMEIdThis is the ID of the managed entity in the ITU G984.4 standard for the OMCI statistics we want to read.
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.14.1.1
zhoneGponOmciStatsCurrentLogicalPortThis specifies which entity on the ONT we want the statistics for. This is a logical number (1,2,...) which is translated according to the ME profile into an entity ID which is included in the command to the ONT.
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.14.1.2
zhoneGponOmciStatsCurrentTextBlob of statistics information returned. Format is: PhysPort,I1,A1,I2,A2,...In,An where PhysPort - physical port ID value Ii = attribute index (0-15, ascii-coded decimal integer) within ME according to G984,4 standard. Ai = attribute value (counter, ascii-coded decimal integer) n = number of attributes returned = number requested. Maximum number of attributes per ME is 16.ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.14.1.3
zhoneGponOmciStatsPreviousTableTable of previous-interval statistics gathered via OMCI from ONT's as specified in the ME profiles used by that ONT.
SEQUENCE OF ZhoneGponOmciStatsPreviousEntry
.1.3.6.1.4.1.5504.5.14.1.15
zhoneGponOmciStatsPreviousEntryRow in zhoneGponOmciStatsPreviousTable. Each row retrieves counters for the last completed 15-minute interval for one managed entity on one logical port of one ONT.
ZhoneGponOmciStatsPreviousEntry
.1.3.6.1.4.1.5504.5.14.1.15.1
zhoneGponOmciStatsPreviousMEIdThis is the ID of the managed entity in the ITU G984.4 standard for the OMCI statistics we want to read.
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.15.1.1
zhoneGponOmciStatsPreviousLogicalPortThis specifies which entity on the ONT we want the statistics for. This is a logical number (1,2,...) which is translated according to the ME profile into an entity ID which is included in the command to the ONT.
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.15.1.2
zhoneGponOmciStatsPreviousTextBlob of statistics information returned. Format is: PhysPort,I1,A1,I2,A2,...In,An where PhysPort - physical port ID value Ii = attribute index (0-15, ascii-coded decimal integer) within ME according to G984,4 standard. Ai = attribute value (counter, ascii-coded decimal integer) n = number of attributes returned = number requested. Maximum number of attributes per ME is 16.ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.15.1.3
zhoneGponOmciStatusTableTable of current-interval statistics gathered via OMCI from ONT's as specified in the ME profiles used by that ONT.
SEQUENCE OF ZhoneGponOmciStatusEntry
.1.3.6.1.4.1.5504.5.14.1.16
zhoneGponOmciStatusEntryRow in zhoneGponOmciStatsCurrentTable. Each row retrieves counters for the current 15-minute interval for one managed entity on one logical port of one ONT.
ZhoneGponOmciStatusEntry
.1.3.6.1.4.1.5504.5.14.1.16.1
zhoneGponOmciStatusMEIdThis is the ID of the managed entity in the ITU G984.4 standard for the OMCI statistics we want to read.
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.16.1.1
zhoneGponOmciStatusLogicalPortThis specifies which entity on the ONT we want the statistics for. This is a logical number (1,2,...) which is translated according to the ME profile into an entity ID which is included in the command to the ONT.
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.16.1.2
zhoneGponOmciStatusTextBlob of status information returned. Format is: PhysPort,attrId1,attrName1,attrNumValue1,attrStrValue1... attrIdn,attrNamen,attrNumValuen,attrStrValuen where PhysPort - physical port ID value attrIdn = index number (0-15) of the attribute within the the ME (ascii decimal) attrNamen = name of the attribute (returned by OCS) attrNumValuen = value of the attribute (ascii decimal) attrStrValuen = interpreted value ( 'up', 'down', etc ) n = number of attributes returned = number requested. Maximum number of attributes per ME is 16.ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.16.1.3
zhoneGponOmciOnuRebootTableTable of objects used to reboot an ONU via the OMCI.
SEQUENCE OF ZhoneGponOmciOnuRebootEntry
.1.3.6.1.4.1.5504.5.14.1.17
zhoneGponOmciOnuRebootEntryA single entry in the table
ZhoneGponOmciOnuRebootEntry
.1.3.6.1.4.1.5504.5.14.1.17.1
zhoneGponOmciOnuRebootSet this object to 'reboot to reboot an ONU. The reboot command is sent to the ONU over the OMCI. Successful transmission of the reboot command to the ONU does no guarantee the ONU will reboot. The ONU may be in a fatal lockup which prevents the processing of the reboot command.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.17.1.1
zhoneGponOmciOnuPortAdminTableTable of objects used to configure the admin state of a physical port on an ONU.
SEQUENCE OF ZhoneGponOmciOnuPortAdminEntry
.1.3.6.1.4.1.5504.5.14.1.18
zhoneGponOmciOnuPortAdminEntryA single entry in the table
ZhoneGponOmciOnuPortAdminEntry
.1.3.6.1.4.1.5504.5.14.1.18.1
zhoneGponOmciOnuPortAdminMEIdThis is the ID of the managed entity in the ITU G984.4 standard.
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.18.1.1
zhoneGponOmciOnuPortAdminLogicalPortThis specifies which entity on the ONT we want. This is a logical number (1,2,...) which is translated according to the ME profile into an entity ID which is included in the command to the ONT.
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.18.1.2
zhoneGponOmciOnuPortAdminStateThis object is used to place an ONU physical port in a DOWN or UP state. This state is a configuration parameter and is preserved.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.18.1.3
zhoneGponOmciOnuPortAdminAutoDetectThis object is used to set the auto detection rate of an ONU physical port.This state is a configuration parameter and is preserved.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.18.1.4
zhoneGponOmciOnuImageUpgradeTableThis table is used to perform ONU software upgrades. There is one table entry for each ONU. Each ONU is addressed by it's ifIndex.
SEQUENCE OF ZhoneGponOmciOnuImageUpgradeEntry
.1.3.6.1.4.1.5504.5.14.1.19
zhoneGponOmciOnuImageUpgradeEntryAn entry for one ONU.
ZhoneGponOmciOnuImageUpgradeEntry
.1.3.6.1.4.1.5504.5.14.1.19.1
zhoneGponOmciOnuImageUpgradeActionWhich software upgrade action to perform.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.19.1.1
zhoneOnuOmciImageUpgradeFilenameName of file to be loaded downloaded to ONU. Required on download actions.rw
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.19.1.2
zhoneGponOmciOnuImageUpgradePartitionOptional on all actions. Indicates which partition or 'none'in which case default is to use inactive partition for download or activate action, or to the uncommitted partion for commit action. On a read, returns the partition used for current or latest upgrade.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.19.1.3
zhoneOnuOmciImageUpgradeImageVersionPartition0Version information for s/w image loaded into partition 0.ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.19.1.4
zhoneOnuOmciImageUpgradeImageVersionPartition1Version information for s/w image loaded into partition 1.ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.19.1.5
zhoneOnuOmciImageUpgradeIsCommittedPartition0Current commit status for partition 0.ro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.19.1.6
zhoneOnuOmciImageUpgradeIsCommittedPartition1Current commit status for partition 1.ro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.19.1.7
zhoneOnuOmciImageUpgradeIsActivatedPartition0Current activated status for partition 0.ro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.19.1.8
zhoneOnuOmciImageUpgradeIsActivatedPartition1Current activated status for partition 1.ro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.19.1.9
zhoneOnuOmciImageUpgradeIsValidPartition0Current valid status for partition 0.ro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.19.1.10
zhoneOnuOmciImageUpgradeIsValidPartition1Current valid status for partition 0.ro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.19.1.11
zhoneOnuOmciImageUpgradeDownloadStatusCurrent s/w image download status.ro
OnuUpgradeState
.1.3.6.1.4.1.5504.5.14.1.19.1.12
zhoneGponOmciOnuImageUpgradeModelModel id read from this onu.ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.19.1.13
zhoneGponOmciOnuImageUpgradeStartTimeStart time, as ascii string, of most recent upgrade.ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.19.1.14
zhoneGponOmciOnuImageUpgradeWillBeActivatedIf true, the downloaded image will be activated when download completes.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5504.5.14.1.19.1.15
zhoneGponOmciOnuImageUpgradeWillBeCommittedIf true, this image will be committed on successful activation.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5504.5.14.1.19.1.16
zhoneGponOmciOnuImageUpgradeTypeIndicates the reason for the upgrade.ro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.19.1.17
zhoneGponOmciOnuImageDownloadProgressPercentageImage download progress. This object is only valid during image download.ro
INTEGER
.1.3.6.1.4.1.5504.5.14.1.19.1.18
zhoneGponOmciOnuImageUpgradeMethodThe download method used for upgrading this ONU. TFTP is used where possible, else OMCI (default).ro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.19.1.19
zhoneGponOltStatusTableCurrent Status of OLT as reported from the Gpon Driver.
SEQUENCE OF ZhoneGponOltStatusEntry
.1.3.6.1.4.1.5504.5.14.1.20
zhoneGponOltStatusEntryRow in the zhoneGponOltStatusTable.
ZhoneGponOltStatusEntry
.1.3.6.1.4.1.5504.5.14.1.20.1
zhoneGponOltOpticTemperatureInternally measured Tranceiver Temperature of the OLT in Celcius.ro
Integer32 (-128..128) UNITS "celcius"
.1.3.6.1.4.1.5504.5.14.1.20.1.1
zhoneGponOltOpticVoltageInternally measured Tranceiver Supply Voltage of the OLT in Volts. The measured value will be in the order of hundredths of Volts.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.20.1.2
zhoneGponOltOpticTxBiasCurrentMeasured Tx Bias current per OLT in milli Amperes.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.20.1.3
zhoneGponOltOpticTxPowerMeasured Tx Output Power of the OLT in dB. The measured value will be in tenths of dB.ro
Integer32 (-600..200) UNITS "tenths of dB"
.1.3.6.1.4.1.5504.5.14.1.20.1.4
zhoneGponOltOpticStatusWhen the End Of Life(EOL) Alarm bit is set an alarm will be raised. Alarm is set at about 150% of original current.Alarm will be level Major. It will be cleared when the SFP is replaced, or when the Alarm bit is cleared. Warning indication will be provided when user asks for status. Warning is set when EOL is at about 130% original current.ro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.20.1.5
zhoneGponOltOpticAlarmsBitmap of alarm conditions present, as reported from the SFP.ro
Bits
.1.3.6.1.4.1.5504.5.14.1.20.1.6
zhoneGponOltStatusWordThe bit-coded OLT status word.ro
Bits
.1.3.6.1.4.1.5504.5.14.1.20.1.7
zhoneGponOltConfiguredOnuCountCount of the ONUs on this OLT where onu-added = TRUE.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.20.1.8
zhoneGponOltActiveOnuCountNumber of ONUs on this OLT currently in operational state UP.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.20.1.9
zhoneGponOltDbaStatusTableCurrent status of OLT DBA as reported from CAC.
SEQUENCE OF ZhoneGponOltDbaStatusEntry
.1.3.6.1.4.1.5504.5.14.1.21
zhoneGponOltDbaStatusEntryRow in the zhoneGponOltDbaStatusTable.
ZhoneGponOltDbaStatusEntry
.1.3.6.1.4.1.5504.5.14.1.21.1
zhoneGponOltDbaTotalAvailableBwThe Total Available DBA Bandwidth per OLT.The unit is Kilobits( 1000 bits).ro
Unsigned32 UNITS "kilobits"
.1.3.6.1.4.1.5504.5.14.1.21.1.1
zhoneGponOltDbaTotalAvailableCompensatedCbrBwThe Total Available DBA Compensated CBR bandwidth per OLT. The unit is Kilobits(1000 bits).ro
Unsigned32 UNITS "kilobits"
.1.3.6.1.4.1.5504.5.14.1.21.1.2
zhoneGponOltDbaAllocatedUbrBwThe Total Available DBA Allocated UBR bandwidth per OLT. The unit is Kilobits(1000 bits).ro
Unsigned32 UNITS "kilobits"
.1.3.6.1.4.1.5504.5.14.1.21.1.3
zhoneGponOltDbaAllocatedCbrBwThe Total Available DBA Allocated CBR bandwidth per OLT. The unit is Kilobits(1000 bits).ro
Unsigned32 UNITS "kilobits"
.1.3.6.1.4.1.5504.5.14.1.21.1.4
zhoneGponOltDbaAllocatedCompensatedCbrBwThe Total Available DBA Allocated CBR Compensated bandwidth per OLT. The unit is Kilobits(1000 bits).ro
Unsigned32 UNITS "kilobits"
.1.3.6.1.4.1.5504.5.14.1.21.1.5
zhoneGponOltDbaAllocatedAssuredBwThe Total Available DBA Allocated Assured bandwidth per OLT. The unit is Kilobits(1000 bits).ro
Unsigned32 UNITS "kilobits"
.1.3.6.1.4.1.5504.5.14.1.21.1.6
zhoneGponOltDbaAllocatedNonAssuredBwThe Total Available DBA Allocated Non Assured bandwidth per OLT. The unit is Kilobits(1000 bits).ro
Unsigned32 UNITS "kilobits"
.1.3.6.1.4.1.5504.5.14.1.21.1.7
zhoneGponOltDbaAllocatedBestEffortBwThe Total Available DBA Allocated Best Effort bandwidth per OLT. The unit is Kilobits(1000 bits).ro
Unsigned32 UNITS "kilobits"
.1.3.6.1.4.1.5504.5.14.1.21.1.8
zhoneGponOltDbaMaxAllocIdsMaximum number of alloc-Ids supported by this OLT.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.21.1.9
zhoneGponOltDbaAvailAllocIdsTotal number of available alloc-Ids for this OLT.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.21.1.10
zhoneGponOltDbaUsedAllocIdsTotal number of alloc-Ids in use for this OLT.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.21.1.11
zhoneGponOltDbaMaxDbaAllocIdsMaximum number of DBA alloc-Ids supported by this OLT.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.21.1.12
zhoneGponOltDbaAvailDbaAllocIdsTotal number of available DBA alloc-Ids for this OLT.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.21.1.13
zhoneGponOltDbaUsedDbaAllocIdsTotal number of DBA alloc-Ids in use for this OLT.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.21.1.14
zhoneGponOltDbaTotalOltGemPortsTotal number GEM Ports currently on this OLT.ro
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.21.1.15
zhoneGponOltDbaLastCacRcThis object contains the result code of the last GPON CAC request for the OLT.ro
GponCacRc
.1.3.6.1.4.1.5504.5.14.1.21.1.16
zhoneGponUpgradeByStateTableInformation about onu upgrade.
SEQUENCE OF ZhoneGponUpgradeByStateEntry
.1.3.6.1.4.1.5504.5.14.1.22
zhoneGponUpgradeByStateEntryRow in onu upgrade table.
ZhoneGponUpgradeByStateEntry
.1.3.6.1.4.1.5504.5.14.1.22.1
zhoneGponUpgradeOltOlt number on the card.
Integer32
.1.3.6.1.4.1.5504.5.14.1.22.1.1
zhoneGponUpgradeOnuOnu number within olt.
Integer32
.1.3.6.1.4.1.5504.5.14.1.22.1.2
zhoneGponUpgradeModelModel ID returned from this Onu.ro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.22.1.3
zhoneGponUpgradeStartTimeLast upgrade start time, as ascii stringro
OCTET STRING
.1.3.6.1.4.1.5504.5.14.1.22.1.4
zhoneGponUpgradeIfIndexOnu ifIndexro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.5504.5.14.1.22.1.5
zhoneGponUpgradeByStateOnuStateThe actual upgrade state of the onu.ro
OnuUpgradeState
.1.3.6.1.4.1.5504.5.14.1.22.1.6
zhoneGponUpgradeByStateWillBeActivatedIf true, the image will be activated if download is successful.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5504.5.14.1.22.1.7
zhoneGponUpgradeByStateWillBeCommittedIf true, image will be committed after successful activation.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5504.5.14.1.22.1.8
zhoneGponUpgradeByStateUpgradeTypeIndicates the reason for the upgrade.ro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.22.1.9
zhoneGponUpgradeByStatePartitionIf upgrade has been requested, this is the image partition of the latest upgrade.ro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.22.1.10
zhoneGponUpgradeProgressPercentageImage download progress. This object is only valid during image download.ro
INTEGER
.1.3.6.1.4.1.5504.5.14.1.22.1.11
zhoneGponUpgradeByStateMethodThe download method used for upgrading this ONU. TFTP is used where possible, else OMCI (default).ro
Enumeration
.1.3.6.1.4.1.5504.5.14.1.22.1.12
zhoneGponCmd
OBJECT IDENTIFIER
.1.3.6.1.4.1.5504.5.14.1.23
zhoneGponCmdOperationGPON Command operation. This object must be supplied with each operation.rw
Enumeration
.1.3.6.1.4.1.5504.5.14.1.23.1
zhoneGponCmdFilterMaskGPON Command operation filter. This object must be supplied with each operation.rw
Bits
.1.3.6.1.4.1.5504.5.14.1.23.2
zhoneGponCmdShelfGPON command 'SHELF' filter value. This parameter is for future use and is currently not supported.rw
Unsigned32 (1)
.1.3.6.1.4.1.5504.5.14.1.23.3
zhoneGponCmdSlotGPON command 'SLOT' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the filter (zhoneGponCmdFilterMask).rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.23.4
zhoneGponCmdOltGPON command 'OLT' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the filter (zhoneGponCmdFilterMask).rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.23.5
zhoneGponCmdOnuGPON command 'ONU' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the filter (zhoneGponCmdFilterMask).rw
Unsigned32
.1.3.6.1.4.1.5504.5.14.1.23.6
zhoneGponOltStatisticsTablePer OLT statistics gathered from Broadlight device.
SEQUENCE OF ZhoneGponOltStatisticsEntry
.1.3.6.1.4.1.5504.5.14.1.24
zhoneGponOltStatisticsEntryPer OLT statistics gathered from Broadlight device.
ZhoneGponOltStatisticsEntry
.1.3.6.1.4.1.5504.5.14.1.24.1
zhoneGponOltStatisticsUpstreamValidGemFramesUpstreamValidGemFrames counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.1
zhoneGponOltStatisticsUpstreamDiscardedFramesUpstreamDiscardedFrames counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.2
zhoneGponOltStatisticsUpstreamGemFramesUpstreamGemFrames counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.3
zhoneGponOltStatisticsUpstreamOmciFramesUpstreamOmciFrames counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.4
zhoneGponOltStatisticsUpstreamPloamFramesUpstreamPloamFrames counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.5
zhoneGponOltStatisticsUpstreamIdlePloamFramesUpstreamIdlePloamFrames counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.6
zhoneGponOltStatisticsDownstreamValidGemFramesDownstreamValidGemFrames counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.7
zhoneGponOltStatisticsDownstreamDiscardedFramesDownstreamDiscardedFrames counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.8
zhoneGponOltStatisticsDownstreamGemFramesDownstreamGemFrames counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.9
zhoneGponOltStatisticsDownstreamOmciFramesDownstreamOmciFrames counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.10
zhoneGponOltStatisticsDownstreamPloamFramesDownstreamPloamFrames counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.11
zhoneGponOltStatisticsDownstreamIdlePloamFramesDownstreamIdlePloamFrames counter.rodeprecated
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.12
zhoneGponOltStatisticsDownstreamPonValidEthernetPktsDownstreamPonValidEthernetPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.13
zhoneGponOltStatisticsDownstreamPonCpuPktsDownstreamPonCpuPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.14
zhoneGponOltStatisticsDownstreamTxBytesDownstreamTxBytes counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.15
zhoneGponOltStatisticsUpstreamPonValidPktsDescription.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.16
zhoneGponOltStatisticsUpstreamPonValidNotIdlePloamsUpstreamPonValidNotIdlePloams counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.17
zhoneGponOltStatisticsUpstreamPonErrorPloamsUpstreamPonErrorPloams counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.18
zhoneGponOltStatisticsUpstreamPonInvalidPktsUpstreamPonInvalidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.19
zhoneGponOltStatisticsUpstreamDroppedPktsInactivePortsUpstreamDroppedPktsInactivePorts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.20
zhoneGponOltStatisticsUpstreamDroppedPloamsFifoFullUpstreamDroppedPloamsFifoFull counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.21
zhoneGponOltStatisticsDownstreamTmValidPktsDownstreamTmValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.22
zhoneGponOltStatisticsDownstreamTmCrcPktsDownstreamTmCrcPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.23
zhoneGponOltStatisticsDownstreamTmDroppedCpuPktsDownstreamTmDroppedCpuPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.24
zhoneGponOltStatisticsDownstreamTmMacLookupMissDownstreamTmMacLookupMiss counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.25
zhoneGponOltStatisticsDownstreamTmPktsForwardedFromHmToPonDownstreamTmPktsForwardedFromHmToPon counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.26
zhoneGponOltStatisticsDownstreamTmPktsDroppedGemPidNotEnabledDownstreamTmPktsDroppedGemPidNotEnabled counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.27
zhoneGponOltStatisticsDownstreamTmQ0ValidPktsDownstreamTmQ0ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.28
zhoneGponOltStatisticsDownstreamTmQ0DroppedPktsDownstreamTmQ0DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.29
zhoneGponOltStatisticsDownstreamTmQ1ValidPktsDownstreamTmQ1ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.30
zhoneGponOltStatisticsDownstreamTmQ1DroppedPktsDownstreamTmQ1DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.31
zhoneGponOltStatisticsDownstreamTmQ2ValidPktsDownstreamTmQ2ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.32
zhoneGponOltStatisticsDownstreamTmQ2DroppedPktsDownstreamTmQ2DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.33
zhoneGponOltStatisticsDownstreamTmQ3ValidPktsDownstreamTmQ3ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.34
zhoneGponOltStatisticsDownstreamTmQ3DroppedPktsDownstreamTmQ3DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.35
zhoneGponOltStatisticsDownstreamTmQ4ValidPktsDownstreamTmQ4ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.36
zhoneGponOltStatisticsDownstreamTmQ4DroppedPktsDownstreamTmQ4DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.37
zhoneGponOltStatisticsDownstreamTmQ5ValidPktsDownstreamTmQ5ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.38
zhoneGponOltStatisticsDownstreamTmQ5DroppedPktsDownstreamTmQ5DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.39
zhoneGponOltStatisticsDownstreamTmQ6ValidPktsDownstreamTmQ6ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.40
zhoneGponOltStatisticsDownstreamTmQ6DroppedPktsDownstreamTmQ6DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.41
zhoneGponOltStatisticsDownstreamTmQ7ValidPktsDownstreamTmQ7ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.42
zhoneGponOltStatisticsDownstreamTmQ7DroppedPktsDownstreamTmQ7DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.43
zhoneGponOltStatisticsUpstreamTmDroppedCpuPktsUpstreamTmDroppedCpuPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.44
zhoneGponOltStatisticsUpstreamTmDroppedPktsCrcErrorUpstreamTmDroppedPktsCrcError counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.45
zhoneGponOltStatisticsUpstreamTmDroppedPktsSecurityUpstreamTmDroppedPktsSecurity counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.46
zhoneGponOltStatisticsUpstreamTmLearnFailuresUpstreamTmLearnFailures counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.47
zhoneGponOltStatisticsUpstreamTmQ0ValidPktsUpstreamTmQ0ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.48
zhoneGponOltStatisticsUpstreamTmQ0DroppedPktsUpstreamTmQ0DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.49
zhoneGponOltStatisticsUpstreamTmQ1ValidPktsUpstreamTmQ1ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.50
zhoneGponOltStatisticsUpstreamTmQ1DroppedPktsUpstreamTmQ1DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.51
zhoneGponOltStatisticsUpstreamTmQ2ValidPktsUpstreamTmQ2ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.52
zhoneGponOltStatisticsUpstreamTmQ2DroppedPktsUpstreamTmQ2DroppedPktsro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.53
zhoneGponOltStatisticsUpstreamTmQ3ValidPktsUpstreamTmQ3ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.54
zhoneGponOltStatisticsUpstreamTmQ3DroppedPktsUpstreamTmQ3DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.55
zhoneGponOltStatisticsUpstreamTmQ4ValidPktsUpstreamTmQ4ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.56
zhoneGponOltStatisticsUpstreamTmQ4DroppedPktsUpstreamTmQ4DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.57
zhoneGponOltStatisticsUpstreamTmQ5ValidPktsUpstreamTmQ5ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.58
zhoneGponOltStatisticsUpstreamTmQ5DroppedPktsUpstreamTmQ5DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.59
zhoneGponOltStatisticsUpstreamTmQ6ValidPktsUpstreamTmQ6ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.60
zhoneGponOltStatisticsUpstreamTmQ6DroppedPktsUpstreamTmQ6DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.61
zhoneGponOltStatisticsUpstreamTmQ7ValidPktsUpstreamTmQ7ValidPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.62
zhoneGponOltStatisticsUpstreamTmQ7DroppedPktsUpstreamTmQ7DroppedPkts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.24.1.63
zhoneGponOltStatisticsClearStatsClear all statistics for the selected interface.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5504.5.14.1.24.1.64
zhoneGponUpstreamOntStatisticsTablePer ONT Upstream Statistics provided by Broadlight.
SEQUENCE OF ZhoneGponUpstreamOntStatisticsEntry
.1.3.6.1.4.1.5504.5.14.1.25
zhoneGponUpstreamOntStatisticsEntryPer ONT Upstream Statistics provided by Broadlight.
ZhoneGponUpstreamOntStatisticsEntry
.1.3.6.1.4.1.5504.5.14.1.25.1
zhoneGponUpstreamOntStatisticsUpstreamBipErrorsUpstreamOntStatisticsUpstreamBipErrors counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.25.1.1
zhoneGponUpstreamOntStatisticsFecCorrectedBytesUpstreamOntStatisticsFecCorrectedBytes counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.25.1.2
zhoneGponUpstreamOntStatisticsFecCorrectedCodewordsUpstreamOntStatisticsFecCorrectedCodewords counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.25.1.3
zhoneGponUpstreamOntStatisticsFecUncorrectedCodewordsUpstreamOntStatisticsFecUncorrectedCodewords counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.25.1.4
zhoneGponUpstreamOntStatisticsTotalRxCodewordsUpstreamOntStatisticsTotalRxCodewords counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.25.1.5
zhoneGponUpstreamOntStatisticsUnreceivedBurstsUpstreamOntStatisticsUnreceivedBursts counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.25.1.6
zhoneGponUpstreamOntStatisticsBipErrorsUpstreamOntStatisticsBipErrors counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.25.1.7
zhoneGponUpstreamOntStatisticsRemoteBipErrorsUpstreamOntStatisticsRemoteBipErrors counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.25.1.8
zhoneGponUpstreamOntStatisticsDriftOfWindowIndicationsUpstreamOntStatisticsDriftOfWindowIndications counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.25.1.9
zhoneGponUpstreamOntStatisticsMessageErrorMessageUpstreamOntStatisticsMessageErrorMessage counter.ro
Counter64
.1.3.6.1.4.1.5504.5.14.1.25.1.10
zhoneGponUpstreamOntStatisticsClearStatsClear all statistics for the selected interface.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.5504.5.14.1.25.1.11
zhoneGponOltMIBThis is the Zhone GPON mib which contains SNMP objects for GPON ONU configuration, alarms, and status.It also includes the GPON OLT status information.
MODULE-IDENTITY
.1.3.6.1.4.1.5504.6.111
zhoneGponOltConfigGroupGPON OLT Config group
Unknown
.1.3.6.1.4.1.5504.9.1.10
zhoneGponOnuConfigGroupGPON ONU Config group
Unknown
.1.3.6.1.4.1.5504.9.1.11
zhoneGponPortConfigGroupGPON Port Config group
Unknown
.1.3.6.1.4.1.5504.9.1.12
zhoneGponAllocIdGroupGPON Allocation ID group
Unknown
.1.3.6.1.4.1.5504.9.1.13
zhoneGponSerialNoGroupGPON Serial Number group
Unknown
.1.3.6.1.4.1.5504.9.1.14
zhoneGponOnuStatusGroupGPON ONU Status group
Unknown
.1.3.6.1.4.1.5504.9.1.15
zhoneOnuOmciMeProfileGroupGPON OMCI ONU ME Profile group
Unknown
.1.3.6.1.4.1.5504.9.1.16
zhoneOnuOmciGenericProfileGroupGPON OMCI ONU Generic Profile group
Unknown
.1.3.6.1.4.1.5504.9.1.17
zhoneOnuOmciSpecificProfileGroupGPON OMCI ONU Specific Profile group
Unknown
.1.3.6.1.4.1.5504.9.1.18
zhoneGponOmciOnuAlarmsGroupGPON OMCI ONU Alarms group
Unknown
.1.3.6.1.4.1.5504.9.1.19
zhoneGponTrapGroupGpon Trap objects.
Unknown
.1.3.6.1.4.1.5504.9.1.20
zhoneGponTrafficProfileGroupGpon Traffic Profile objects.
Unknown
.1.3.6.1.4.1.5504.9.1.21
zhoneGponPortStatusGroupGpon Port Status objects.
Unknown
.1.3.6.1.4.1.5504.9.1.22
zhoneGponOmciStatusGroupGpon Omci Status objects.
Unknown
.1.3.6.1.4.1.5504.9.1.24
zhoneGponOmciOnuRebootGroupGpon Omci Reboot objects.
Unknown
.1.3.6.1.4.1.5504.9.1.25
zhoneGponOmciOnuPortAdminGroupGpon Port Admin objects.
Unknown
.1.3.6.1.4.1.5504.9.1.26
zhoneGponOmciOnuImageUpgradeGroupGroup of ONU Image Upgrade objects
Unknown
.1.3.6.1.4.1.5504.9.1.27
zhoneGponOltStatusGroupGPON OLT Status Group.
Unknown
.1.3.6.1.4.1.5504.9.1.28
zhoneGponeOltDbaStatusGroupGPON OLT Dba Status Group.
Unknown
.1.3.6.1.4.1.5504.9.1.29
zhoneGponCmdGroupGPON Command objects
Unknown
.1.3.6.1.4.1.5504.9.1.31
zhoneGponOltStatisticsGroupGpon OLT Statistics objects.
Unknown
.1.3.6.1.4.1.5504.9.1.32
zhoneGponUpstreamOntStatisticsGroupGpon Upstream ONT Statistics objects.
Unknown
.1.3.6.1.4.1.5504.9.1.33
zhoneGponDeprecatedGpon Deprecated objects.deprecated
Unknown
.1.3.6.1.4.1.5504.9.1.34
Zhone-GPON-MIB - SNMP MIB Reference | MIBs Explorer