XYLAN-PORT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for XYLAN-PORT-MIB.
107
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
107 total| Object Name |
|---|
virtualPort OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.3.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.800.2.3.1 |
vportTableA list of Virtual Port instances. SEQUENCE OF VportEntry .1.3.6.1.4.1.800.2.3.1.1 |
vportEntryA Virtual Port entry. VportEntry .1.3.6.1.4.1.800.2.3.1.1.1 |
vportNumberA unique number identifies this Virtual Port
instance within the physical OmniSwitch. This
number is NOT meant for user consumption.rw INTEGER .1.3.6.1.4.1.800.2.3.1.1.1.1 |
vportSlotThe physical slot number for this port instance (vport).rw INTEGER .1.3.6.1.4.1.800.2.3.1.1.1.2 |
vportIFThe on-board interface number.rw INTEGER .1.3.6.1.4.1.800.2.3.1.1.1.3 |
vportFuncTypeThe function for this vport. ie. local, remote, atm.rw XylanPortFuncCodes .1.3.6.1.4.1.800.2.3.1.1.1.4 |
vportFuncTypeInstanceThe specific instance of this slot/IF/type. For
'most' interface types this will always be 1. The
exception is an ATM connected port.rw INTEGER .1.3.6.1.4.1.800.2.3.1.1.1.5 |
vportVlanNumberThe VLAN that this virtual port belongs to. The
default for row creation is 1.rw INTEGER .1.3.6.1.4.1.800.2.3.1.1.1.6 |
vportMACaddressThe MAC address represented by this Virtual Port.
This value is returned upon row creation and attachment.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.800.2.3.1.1.1.7 |
vportBridgeProtocolThe type of bridge protocol supported for this
service. The default rfor row creation is transparent(3).rw Enumeration .1.3.6.1.4.1.800.2.3.1.1.1.8 |
vportEncapsulationThe frame encapsulation translation to be used for this
particular port. The value indicates the frame format
required for the output interface. The default for
row creation is default(2) the meaning of which is
dependent on the media type of the portrw XylanVportEncapsulationCodes .1.3.6.1.4.1.800.2.3.1.1.1.9 |
vportBrdgModeIf vportFuncType is either localBridge(1) or
localOpSwitch(2) type, setting this field to
autoSwitch(3), the default, will allow the port
to switch between the localBridge(1) or localOpSwitch(2)
mode. The forceBridge(4) mode will prevent the
localBridge(1) mode to switch to localOpSwitch(2) mode
even there is only one MAC address is detacted. The
forceSwitch(5) mode prevents the localOpSwitch(2)
mode to switch to localBridge(1) mode. The user
would have to make sure no loop is formed in the
network in this case. The default is autoSwitch(3).rw Enumeration .1.3.6.1.4.1.800.2.3.1.1.1.10 |
vportSwitchTimerThe time out period for a Bridged port to convert
to a switch optimized mode in seconds if vportBrdgMode
is set to autoSwitch(1). Setting it to zero will
cause automactic switching between the two modes
immediately. The default is 60 seconds.rw INTEGER .1.3.6.1.4.1.800.2.3.1.1.1.11 |
vportDescriptionA string to identify the instance of this port.rw DisplayString .1.3.6.1.4.1.800.2.3.1.1.1.12 |
vportAdmStatusThe administrative status of this port which
the user can attach or detach during configuration.
The attached port can also be switched to disable(1)
or enable(2), or delete(3). create(4) and modify(5) are used ONLY for traps.rw XylanVportAdminStatCodes .1.3.6.1.4.1.800.2.3.1.1.1.13 |
vportOperStatusThe operational status of this virtual port. This
is called slot/if/type/instance???. Note that if
the card is removed for this slot, the service will
be marked as portDown(1). The chassis MIB will maintain
the record of the card be absent....ro XylanPortOperStatCodes .1.3.6.1.4.1.800.2.3.1.1.1.14 |
vportFrameInsThe number of frames received from this port.ro Counter .1.3.6.1.4.1.800.2.3.1.1.1.15 |
vportInOctetsThe total number of octets received from this port.ro Counter .1.3.6.1.4.1.800.2.3.1.1.1.16 |
vportInUcastPktsThe total number of subnetwork-unicast packets received.ro Counter .1.3.6.1.4.1.800.2.3.1.1.1.17 |
vportInNUcastPktsThe total number of non-unicast packets received.ro Counter .1.3.6.1.4.1.800.2.3.1.1.1.18 |
vportInBufDiscsThe number of inbound frames discarded from this port due to
receive queue overrun.ro Counter .1.3.6.1.4.1.800.2.3.1.1.1.19 |
vportInErrDiscsThe number of inbound frames discarded from
this port due to error.ro Counter .1.3.6.1.4.1.800.2.3.1.1.1.20 |
vportFrameOutsThe number of frames transmitted from this port.ro Counter .1.3.6.1.4.1.800.2.3.1.1.1.21 |
vportOutOctetsThe total number of octets transmitted from this port.ro Counter .1.3.6.1.4.1.800.2.3.1.1.1.22 |
vportOutUcastPktsThe total number of subnetwork-unicast packets transmitted.ro Counter .1.3.6.1.4.1.800.2.3.1.1.1.23 |
vportOutNUcastPktsThe total number of non-unicast packets transmitted.ro Counter .1.3.6.1.4.1.800.2.3.1.1.1.24 |
vportOutBufDiscsThe number of outbound frames discarded from this
port due to transmit queue overrun.ro Counter .1.3.6.1.4.1.800.2.3.1.1.1.25 |
vportOutErrDiscsThe number of outbound frames discarded
from this port due to error.ro Counter .1.3.6.1.4.1.800.2.3.1.1.1.26 |
vportFloodLimitThe amount of flooded bandwidth in byte / second that may be
transmitted on this port.rw INTEGER .1.3.6.1.4.1.800.2.3.1.1.1.27 |
vportVLANMembershipThis object is a bit mask with each bit that is set indicating that
the VLAN given by the bit position is active on this port.ro INTEGER .1.3.6.1.4.1.800.2.3.1.1.1.28 |
vportManualModeThis setting permits the user to manually set the
spanning tree state of the given port. It is designed
primarily for those virtual ports that can not utilize
the IBM spanning tree algorithm. If set to the
manual mode (ether manual_override_forwarding or
manual_override_blockng), the IEEE or IBM spanning tree
algorithm is disabled for the given port.rw Enumeration .1.3.6.1.4.1.800.2.3.1.1.1.29 |
vportMVLANMembershipThis object is a bit mask with each bit that is set indicating that
the Multicast VLAN given by the bit position is active on this port.ro INTEGER .1.3.6.1.4.1.800.2.3.1.1.1.30 |
vportFloodLimitDiscsThe number of outbound frames discarded from this port due to the
flood limit being exceed.ro Counter .1.3.6.1.4.1.800.2.3.1.1.1.31 |
vportIfIndexThe MIB-2 interface table 'ifIndex' assigned to
this virtual port.ro INTEGER .1.3.6.1.4.1.800.2.3.1.1.1.32 |
vportSwitchTableA list of Virtual Port instances. SEQUENCE OF VportSwitchEntry .1.3.6.1.4.1.800.2.3.1.2 |
vportSwitchEntryA Virtual Port Switch Options entry. VportSwitchEntry .1.3.6.1.4.1.800.2.3.1.2.2 |
vportSwitchSlotThe physical slot number for this port instance (vport).rw INTEGER .1.3.6.1.4.1.800.2.3.1.2.2.1 |
vportSwitchIFThe on-board interface number.rw INTEGER .1.3.6.1.4.1.800.2.3.1.2.2.2 |
vportSwitchFuncTypeThe function for this vport. ie. local, remote, atm.rw XylanPortFuncCodes .1.3.6.1.4.1.800.2.3.1.2.2.3 |
vportSwitchFuncTypeInstanceThe specific instance of this slot/IF/type. For
'most' interface types this will always be 1. The
exception is an ATM connected port.rw INTEGER .1.3.6.1.4.1.800.2.3.1.2.2.4 |
vportSwitchipEthertypeA Virtual Port Switch translation option for IP Ethertype traffic.rw XylanVportTranslationCodes .1.3.6.1.4.1.800.2.3.1.2.2.5 |
vportSwitchipSnapA Virtual Port Switch translation option for IP SNAP traffic.rw XylanVportTranslationCodes .1.3.6.1.4.1.800.2.3.1.2.2.6 |
vportSwitchipxEthertypeA Virtual Port Switch translation option for IPX Ethertype traffic.rw XylanVportTranslationCodes .1.3.6.1.4.1.800.2.3.1.2.2.7 |
vportSwitchipxPropA Virtual Port Switch translation option for IPX 802.3 traffic.rw XylanVportTranslationCodes .1.3.6.1.4.1.800.2.3.1.2.2.8 |
vportSwitchipxLlcA Virtual Port Switch translation option for IPX 802.2 traffic.rw XylanVportTranslationCodes .1.3.6.1.4.1.800.2.3.1.2.2.9 |
vportSwitchipxSnapA Virtual Port Switch translation option for IPX SNAP traffic.rw XylanVportTranslationCodes .1.3.6.1.4.1.800.2.3.1.2.2.10 |
vportSwitchDefaultTableA list of Media instances. SEQUENCE OF VportSwitchDefaultEntry .1.3.6.1.4.1.800.2.3.1.3 |
vportSwitchDefaultEntryA Virtual Port Switch Options entry. VportSwitchDefaultEntry .1.3.6.1.4.1.800.2.3.1.3.2 |
vportSwitchDefaultIndexThe index selecting which media type default is to be configured/viewed.rw Enumeration .1.3.6.1.4.1.800.2.3.1.3.2.1 |
vportSwitchDefaultipEthertypeA Virtual Port Switch translation option for IP Ethertype traffic.rw XylanVportTranslationCodes .1.3.6.1.4.1.800.2.3.1.3.2.2 |
vportSwitchDefaultipSnapA Virtual Port Switch translation option for IP SNAP traffic.rw XylanVportTranslationCodes .1.3.6.1.4.1.800.2.3.1.3.2.3 |
vportSwitchDefaultipxEthertypeA Virtual Port Switch translation option for IPX Ethertype traffic.rw XylanVportTranslationCodes .1.3.6.1.4.1.800.2.3.1.3.2.4 |
vportSwitchDefaultipxPropA Virtual Port Switch translation option for IPX 802.3 traffic.rw XylanVportTranslationCodes .1.3.6.1.4.1.800.2.3.1.3.2.5 |
vportSwitchDefaultipxLlcA Virtual Port Switch translation option for IPX LLC traffic.rw XylanVportTranslationCodes .1.3.6.1.4.1.800.2.3.1.3.2.6 |
vportSwitchDefaultipxSnapA Virtual Port Switch translation option for IPX SNAP traffic.rw XylanVportTranslationCodes .1.3.6.1.4.1.800.2.3.1.3.2.7 |
logicalPort OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.3.2 |
physicalPort OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.3.3 |
phyPortTableA list of Physical Port instances. SEQUENCE OF PhyPortEntry .1.3.6.1.4.1.800.2.3.3.1 |
phyPortEntryA Physical Port entry. PhyPortEntry .1.3.6.1.4.1.800.2.3.3.1.1 |
phyPortSlotThe physical slot number for this port.ro INTEGER .1.3.6.1.4.1.800.2.3.3.1.1.1 |
phyPortIFThe on-board interface number.ro INTEGER .1.3.6.1.4.1.800.2.3.3.1.1.2 |
phyPortMediaTypeThe device type of this physical portro XylanPhyPortTypeCodes .1.3.6.1.4.1.800.2.3.3.1.1.3 |
phyPortDescriptionA string to identify the instance of this port.rw DisplayString .1.3.6.1.4.1.800.2.3.3.1.1.4 |
phyPortAdmStatusThe administrative status of this port. The user
can enable or disable this physical port.rw XylanPhyPortAdminStatCodes .1.3.6.1.4.1.800.2.3.3.1.1.5 |
phyPortOperStatusThe operational status of this port.ro XylanPortOperStatCodes .1.3.6.1.4.1.800.2.3.3.1.1.6 |
phyPortFrameInsThe number of frames received from this port.ro Counter .1.3.6.1.4.1.800.2.3.3.1.1.7 |
phyPortInOctetsThe total number of octets received from this port.ro Counter .1.3.6.1.4.1.800.2.3.3.1.1.8 |
phyPortInUcastPktsThe total number of subnetwork-unicast packets received.ro Counter .1.3.6.1.4.1.800.2.3.3.1.1.9 |
phyPortInNUcastPktsThe total number of non-unicast packets received.ro Counter .1.3.6.1.4.1.800.2.3.3.1.1.10 |
phyPortInBufDiscsThe number of inbound frames discarded from this port
due to receive queue overrun.ro Counter .1.3.6.1.4.1.800.2.3.3.1.1.11 |
phyPortInErrDiscsThe number of inbound frames discarded from this
port due to error.ro Counter .1.3.6.1.4.1.800.2.3.3.1.1.12 |
phyPortFrameOutsThe number of frames transmitted from this port.ro Counter .1.3.6.1.4.1.800.2.3.3.1.1.13 |
phyPortOutOctetsThe total number of octets transmitted from this port.ro Counter .1.3.6.1.4.1.800.2.3.3.1.1.14 |
phyPortOutUcastPktsThe total number of subnetwork-unicast packets transmitted.ro Counter .1.3.6.1.4.1.800.2.3.3.1.1.15 |
phyPortOutNUcastPktsThe total number of non-unicast packets transmitted.ro Counter .1.3.6.1.4.1.800.2.3.3.1.1.16 |
phyPortOutBufDiscsThe number of outbound frames discarded from this
port due to transmit queue overrun.ro Counter .1.3.6.1.4.1.800.2.3.3.1.1.17 |
phyPortOutErrDiscsThe number of outbound frames discarded from
this port due to error.ro Counter .1.3.6.1.4.1.800.2.3.3.1.1.18 |
phyPortToInterfaceThe interface number which instantiates the MIB-2 'ifTable'
for this physical port. It is calculated as 'phyPortSlot'
multipled by 100 plus 'phyPortIF' for this physical port.ro INTEGER .1.3.6.1.4.1.800.2.3.3.1.1.19 |
phyPortFddiAdmModeThe administrative mode of this FDDI port. The user can set this
port to either station(2) of concentrator(3) mode. NOTE: this does
not take effect until the SMT subsystem is restarted. Examine the
phyPortFddiOpMode to see the current operational mode. The
administrative mode will be invalid(1) for all but FDDI or CDDI
boards.rw Enumeration .1.3.6.1.4.1.800.2.3.3.1.1.20 |
phyPortFddiOpModeThe current station Operational Mode of this FDDI port. The
Operational Mode will be invalid(1) for all but FDDI or CDDI
boards.ro Enumeration .1.3.6.1.4.1.800.2.3.3.1.1.21 |
phyPortFddiMacFlushModeThe current MAC address flush mode (only valid for FDDI ports of
mode concentrator). This controls whether MAC addresses will be
flushed if any PHY port disconnects are detected. The MAC address
flush mode will be invalid(1) for all but FDDI or CDDI boards.rw Enumeration .1.3.6.1.4.1.800.2.3.3.1.1.22 |
mesmConfTableA list of MESM Physical Port instances. SEQUENCE OF MesmConfEntry .1.3.6.1.4.1.800.2.3.3.2 |
mesmConfEntryA MESM Physical Port entry. MesmConfEntry .1.3.6.1.4.1.800.2.3.3.2.1 |
mesmPortSlotThe physical slot number for this MESM port.ro INTEGER .1.3.6.1.4.1.800.2.3.3.2.1.1 |
mesmPortIFThe on-board interface number for this MESM port.ro INTEGER .1.3.6.1.4.1.800.2.3.3.2.1.2 |
mesmPortAutoNegotiateThe current autonegotiate mode of this MESM port.
This object decides if port line speed and duplex mode
are controlled by the user or negotiated automatically.rw Enumeration .1.3.6.1.4.1.800.2.3.3.2.1.3 |
mesmPortAutoSpeedThe automatically detected port line speed
of this MESM port.ro Enumeration .1.3.6.1.4.1.800.2.3.3.2.1.4 |
mesmPortAutoDuplexModeThe automatically detected port duplex mode
of this MESM port.ro Enumeration .1.3.6.1.4.1.800.2.3.3.2.1.5 |
mesmPortCfgSpeedThe configured port line speed of this
MESM port.rw Enumeration .1.3.6.1.4.1.800.2.3.3.2.1.6 |
mesmPortCfgDuplexModeThe configured port duplex mode of this
MESM port.rw Enumeration .1.3.6.1.4.1.800.2.3.3.2.1.7 |
phyPortPCauseThe cause for a port partitioning event.
This object is not intended to be accessed directly.
It is defined for use in port partitioning traps. Enumeration .1.3.6.1.4.1.800.2.3.3.3 |
mirrorPort OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.3.4 |
mirrorTableA list of Virtual Port instances. SEQUENCE OF MirrorEntry .1.3.6.1.4.1.800.2.3.4.1 |
mirrorEntryA Virtual Port entry. MirrorEntry .1.3.6.1.4.1.800.2.3.4.1.1 |
mirrorNumberA unique number identifies this Virtual Port
instance within the physical OmniSwitch. This
number is NOT meant for user consumption.ro INTEGER .1.3.6.1.4.1.800.2.3.4.1.1.1 |
mirrorSlotThe physical slot number for this port instance (mirror).ro INTEGER .1.3.6.1.4.1.800.2.3.4.1.1.2 |
mirrorIFThe on-board interface number.ro INTEGER .1.3.6.1.4.1.800.2.3.4.1.1.3 |
mirrorFuncTypeThe function for this Vport. ie. local, remote, atm.ro XylanPortFuncCodes .1.3.6.1.4.1.800.2.3.4.1.1.4 |
mirrorFuncTypeInstanceThe specific instance of this slot/IF/type. For
'most' interface types this will always be 1. The
exception is an ATM connected port.ro INTEGER .1.3.6.1.4.1.800.2.3.4.1.1.5 |
mirrorMirroringSlotThe physical slot number of the mirroring port.rw INTEGER .1.3.6.1.4.1.800.2.3.4.1.1.6 |
mirrorMirroringIFThe on-board interface number or the mirroring port.rw INTEGER .1.3.6.1.4.1.800.2.3.4.1.1.7 |
mirrorMirroringFuncTypeThe function for this Vport. ie. local, remote, atm.rw XylanPortFuncCodes .1.3.6.1.4.1.800.2.3.4.1.1.8 |
mirrorMirroringFuncTypeInstanceThe specific instance of this slot/IF/type. For
'most' interface types this will always be 1. The
exception is an ATM connected port.rw INTEGER .1.3.6.1.4.1.800.2.3.4.1.1.9 |
mirrorStatusWhether mirroring is enabled or disabled for this port.
prior to enabling mirroring, or at the same time all other
read write values in this table for the same row must
be set to appropriate values, or defaults will be assumed.rw XylanMirrorEnableCodes .1.3.6.1.4.1.800.2.3.4.1.1.10 |
echannelPort OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.3.5 |