XYLAN-M013-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for XYLAN-M013-MIB.
200
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
200 total| Object Name |
|---|
m013ProvisioningGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.25.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.800.2.25.1 |
m013ProvisioningTableA table of provisioning configuration data used to
configure an HDLC interface on a DS3 connection. SEQUENCE OF M013ProvisioningEntry .1.3.6.1.4.1.800.2.25.1.1 |
m013ProvisioningEntryAn entry in the table, containing information about
provisioning an HDLC channel on a DS3 connection. M013ProvisioningEntry .1.3.6.1.4.1.800.2.25.1.1.1 |
m013SlotIndexSlot for channel being provisioned.ro INTEGER .1.3.6.1.4.1.800.2.25.1.1.1.1 |
m013LogicalPortIndexA per-slot unique HDLC channel number.ro INTEGER .1.3.6.1.4.1.800.2.25.1.1.1.2 |
m013DescriptionA user description of this channel.rw DisplayString .1.3.6.1.4.1.800.2.25.1.1.1.3 |
m013Ds3PortIndexPhysical DS3 port for channel being provisioned.rw INTEGER .1.3.6.1.4.1.800.2.25.1.1.1.4 |
m013Ds1FractionThe DS1 channel within the DS3 circuit that
is used to create this HDLC channel. An
entry of 0 indicates this is a clear
channel (full DS3 bandwidth) connection.rw INTEGER .1.3.6.1.4.1.800.2.25.1.1.1.5 |
m013Ds0MaskThis is a bit mask of the DS0 channels within
the selected DS1 fraction that make up the
desired HDLC channel. If m013Ds1Fraction is
0 this value has no meaningrw INTEGER (1..'ffffff'h) .1.3.6.1.4.1.800.2.25.1.1.1.6 |
m013IfIndexA per-switch unique number for this HDLC channel.
This number is a combination of Slot and Logical
Port numbers.ro INTEGER .1.3.6.1.4.1.800.2.25.1.1.1.7 |
m013ProtocolThe L2 protocol that is used on this HDLC channel.rw Enumeration .1.3.6.1.4.1.800.2.25.1.1.1.8 |
m013EntryStatusValue used for the control of the creation of
this interface.rw Enumeration .1.3.6.1.4.1.800.2.25.1.1.1.9 |
m013ServiceGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.25.2 |
m013ServiceTableA table of M013 services status and
parameter information. SEQUENCE OF M013ServiceEntry .1.3.6.1.4.1.800.2.25.2.1 |
m013ServiceEntryAn entry in the table, containing information about
the M013 services. M013ServiceEntry .1.3.6.1.4.1.800.2.25.2.1.1 |
m013ServiceSlotIndexA unique value which identifies this HSM board slot.rw INTEGER .1.3.6.1.4.1.800.2.25.2.1.1.1 |
m013ServiceLogicalPortIndexA per-slot unique value which identifies this HDLC logical port.rw INTEGER .1.3.6.1.4.1.800.2.25.2.1.1.2 |
m013ServiceNumberThe unique service number for this particular slot/logical port.ro INTEGER .1.3.6.1.4.1.800.2.25.2.1.1.3 |
m013ServiceTableEntryTypeThe type of table entry for this M013 Serivce.
A static entry is one that is stored in non-volatile
memory.
A dynamic entry is one that is automatically created
for an unconfigured virtual circuit based on the
the type of service (bridging or trunking) and whether
a default VLAN is defined for the type of service.
Changing the value via a write command from dynamic
to static will cause the table entry to be stored
into non-volatile memory. Setting a value of dynamic
is not allowed.rw Enumeration .1.3.6.1.4.1.800.2.25.2.1.1.4 |
m013ServiceDescriptionA description for this M013 service.rw DisplayString .1.3.6.1.4.1.800.2.25.2.1.1.5 |
m013ServiceTypeThe service type.rw Enumeration .1.3.6.1.4.1.800.2.25.2.1.1.6 |
m013ServiceOperStatusThe service operational status.ro Enumeration .1.3.6.1.4.1.800.2.25.2.1.1.7 |
m013ServiceAdminStatusThe service adminstration status.rw Enumeration .1.3.6.1.4.1.800.2.25.2.1.1.8 |
m013ServiceVirtualCircuitThe virtual circuit for this service. In case of PPP
it should be set to zero, in case of Frame Relay - to the
appropriate DLCI value.rw INTEGER .1.3.6.1.4.1.800.2.25.2.1.1.9 |
m013ServiceVlansThe Vlans for this service. Interpret this as a 16 bit field
per vlan: Trunking 1-32, Bridging 1, IP 1rw OCTET STRING .1.3.6.1.4.1.800.2.25.2.1.1.10 |
m013ServiceBridgingModeThe default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLYrw INTEGER .1.3.6.1.4.1.800.2.25.2.1.1.11 |
m013FrxPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.25.3 |
m013FrxPortTableA table of port layer status and parameter information
for the UNI's logical interface. SEQUENCE OF M013FrxPortEntry .1.3.6.1.4.1.800.2.25.3.1 |
m013FrxPortEntryAn entry in the table, containing information about
the logical layer of a UNI interface. M013FrxPortEntry .1.3.6.1.4.1.800.2.25.3.1.1 |
m013FrxPortSlotIndexA unique value which identifies this HSM board slot.ro INTEGER .1.3.6.1.4.1.800.2.25.3.1.1.1 |
m013FrxPortPortIndexA per-slot unique value which identifies this HDLC logical port.ro INTEGER .1.3.6.1.4.1.800.2.25.3.1.1.2 |
m013FrxPortDescriptionA description for this Frame Relay port.rw DisplayString .1.3.6.1.4.1.800.2.25.3.1.1.3 |
m013FrxPortAdminStatusIf set to enabled, enables Frame Relay Interface.
If set to disabled, disables Frame Relay Interfacerw Enumeration .1.3.6.1.4.1.800.2.25.3.1.1.4 |
m013FrxPortDefaultIpRoutingAdminStatusIf set to enabled, enables Default IP Routing.
If set to disabled, disables Default IP Routingrw Enumeration .1.3.6.1.4.1.800.2.25.3.1.1.5 |
m013FrxPortDefaultBridgingAdminStatusIf set to enabled, enables Default Bridging.
If set to disabled, disables Default Bridging.rw Enumeration .1.3.6.1.4.1.800.2.25.3.1.1.6 |
m013FrxPortDefaultBridgingVLANThe default VLAN for new PVCs that have not been
configured for the Bridging Service.
A value of zero(0) indicates that unconfigured VCs will not
perform a bridging service and will discard all
bridged format frames received or transmitted.
A non-zero value indicates the bridging VLAN to be used if
the network informs the port of a new VC.rw INTEGER .1.3.6.1.4.1.800.2.25.3.1.1.7 |
m013FrxPortDefaultBridgingModeThe default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLYrw INTEGER .1.3.6.1.4.1.800.2.25.3.1.1.8 |
m013FrxPortDynamicVCCreationIf set to enabled, enables Dynamic VC creation.
If set to disabled, disables Dynamic VC creation.rw Enumeration .1.3.6.1.4.1.800.2.25.3.1.1.9 |
m013FrxVcControlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.25.4 |
m013FrxVcControlTableA table of Frame Relay virtual circuit
configuration and control information. SEQUENCE OF M013FrxVcControlEntry .1.3.6.1.4.1.800.2.25.4.1 |
m013FrxVcControlEntryAn entry in the table, containing information about
the Frame Relay virtual circuit statistics. M013FrxVcControlEntry .1.3.6.1.4.1.800.2.25.4.1.1 |
m013FrxVcControlSlotIndexA unique value which identifies this HSM board slot.ro INTEGER .1.3.6.1.4.1.800.2.25.4.1.1.1 |
m013FrxVcControlPortIndexA per-slot unique value which identifies this HDLC logical port.ro INTEGER .1.3.6.1.4.1.800.2.25.4.1.1.2 |
m013FrxVcControlDlciA unique value which identifies this Data Link Connection
Identifier (DLCI) for this Frame Relay Virtual Circuit.ro INTEGER .1.3.6.1.4.1.800.2.25.4.1.1.3 |
m013FrxVcControlIpRoutingAdminStatusIf set to enabled, enables IP Routing.
If set to disabled, disables IP Routingrw Enumeration .1.3.6.1.4.1.800.2.25.4.1.1.4 |
m013FrxVcStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.25.5 |
m013FrxVcStatsTableA table of Frame Relay virtual circuit
statistics information. SEQUENCE OF M013FrxVcStatsEntry .1.3.6.1.4.1.800.2.25.5.1 |
m013FrxVcStatsEntryAn entry in the table, containing information about
the Frame Relay virtual circuit statistics. M013FrxVcStatsEntry .1.3.6.1.4.1.800.2.25.5.1.1 |
m013FrxVcStatsSlotIndexA unique value which identifies this HSM board slot.ro INTEGER .1.3.6.1.4.1.800.2.25.5.1.1.1 |
m013FrxVcStatsPortIndexA per-slot unique value which identifies this HDLC logical port.ro INTEGER .1.3.6.1.4.1.800.2.25.5.1.1.2 |
m013FrxVcStatsDlciA unique value which identifies this Data Link Connection
Identifier (DLCI) for this Frame Relay Virtual Circuit.ro INTEGER .1.3.6.1.4.1.800.2.25.5.1.1.3 |
m013FrxVcStatsTxIPOctetsThe total number of transmitted octets (including
the Frame Relay Header field) within routed IP format frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.4 |
m013FrxVcStatsTxIPFramesThe total number of transmitted routed IP format frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.5 |
m013FrxVcStatsRxIPOctetsThe total number of received octets (including
the Frame Relay Header field) within routed IP format frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.6 |
m013FrxVcStatsRxIPFramesThe total number of received routed IP format frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.7 |
m013FrxVcStatsTxIPXOctetsThe total number of transmitted octets (including
the Frame Relay Header field) within routed IPX format frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.8 |
m013FrxVcStatsTxIPXFramesThe total number of transmitted routed IPX format frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.9 |
m013FrxVcStatsRxIPXOctetsThe total number of received octets (including
the Frame Relay Header field) within routed IPX format frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.10 |
m013FrxVcStatsRxIPXFramesThe total number of received routed IPX format frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.11 |
m013FrxVcStatsTxBPDUOctetsThe total number of transmitted octets (including
the Frame Relay Header field) within BPDU frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.12 |
m013FrxVcStatsTxBPDUFramesThe total number of transmitted BPDU frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.13 |
m013FrxVcStatsRxBPDUOctetsThe total number of received octets (including
the Frame Relay Header field) within BPDU frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.14 |
m013FrxVcStatsRxBPDUFramesThe total number of received BPDU frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.15 |
m013FrxVcStatsTxEthernetOctetsThe total number of transmitted octets (including
the Frame Relay Header field) within bridged 802.3 format
frames on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.16 |
m013FrxVcStatsTxEthernetFramesThe total number of transmitted bridged 802.3 format frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.17 |
m013FrxVcStatsRxEthernetOctetsThe total number of received octets (including
the Frame Relay Header field) within bridged 802.3 format
frames on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.18 |
m013FrxVcStatsRxEthernetFramesThe total number of received bridged 802.3 format frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.19 |
m013FrxVcStatsTx8025OctetsThe total number of transmitted octets (including
the Frame Relay Header field) within 8025 frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.20 |
m013FrxVcStatsTx8025FramesThe total number of transmitted 8025 frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.21 |
m013FrxVcStatsRx8025OctetsThe total number of received octets (including
the Frame Relay Header field) within 8025 frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.22 |
m013FrxVcStatsRx8025FramesThe total number of received 8025 frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.23 |
m013FrxVcStatsTxFDDIOctetsThe total number of transmitted octets (including
the Frame Relay Header field) within FDDI frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.24 |
m013FrxVcStatsTxFDDIFramesThe total number of transmitted FDDI frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.25 |
m013FrxVcStatsRxFDDIOctetsThe total number of received octets (including
the Frame Relay Header field) within FDDI frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.26 |
m013FrxVcStatsRxFDDIFramesThe total number of received FDDI frames
on this virtual circuit.ro Counter .1.3.6.1.4.1.800.2.25.5.1.1.27 |
m013PppxConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.25.6 |
m013PppxConfigTableA table of PPP protocol entity configuration information. SEQUENCE OF M013PppxConfigEntry .1.3.6.1.4.1.800.2.25.6.1 |
m013PppxConfigEntryAn entry in the PPP Entity Configuration table,
containing information about PPP protocol configuration. M013PppxConfigEntry .1.3.6.1.4.1.800.2.25.6.1.1 |
m013PppxConfigSlotIndexA unique value which identifies this HSM board slot.ro INTEGER .1.3.6.1.4.1.800.2.25.6.1.1.1 |
m013PppxConfigPortIndexA per-slot unique value which identifies this HDLC logical port.ro INTEGER .1.3.6.1.4.1.800.2.25.6.1.1.2 |
m013PppxConfigDescriptionA description for this PPP port.rw DisplayString .1.3.6.1.4.1.800.2.25.6.1.1.3 |
m013PppxConfigAdminStatusThis object controls the Administrative Status
of this PPP Entity. Enabled will allow the
PPP Entity to operate. Disabled will
disable the PPP Entity without deleting it.
Delete will disable the PPP entity and delete
the PPP configuration record.rw Enumeration .1.3.6.1.4.1.800.2.25.6.1.1.4 |
m013PppxConfigModeThis object controls whether or not Multilink PPP will
be used.rw Enumeration .1.3.6.1.4.1.800.2.25.6.1.1.5 |
m013PppxConfigIpConfigAdminStatusThe immediate desired status of the IP network
protocol. Setting this object to open will
inject an administrative open event into the IP
network protocol's finite state machine.
Setting this object to close will inject an
administrative close event into the IP network
protocol's finite state machine.rw Enumeration .1.3.6.1.4.1.800.2.25.6.1.1.6 |
m013PppxConfigBcpConfigAdminStatusThe immediate desired status of the BCP network
protocol. Setting this object to open will
inject an administrative open event into the BCP
network protocol's finite state machine.
Setting this object to close will inject an
administrative close event into the IP network
protocol's finite state machine.rw Enumeration .1.3.6.1.4.1.800.2.25.6.1.1.7 |
m013PppxConfigIpxConfigAdminStatusThe immediate desired status of the IPX network
protocol. Setting this object to open will
inject an administrative open event into the IPX
network protocol's finite state machine.
Setting this object to close will inject an
administrative close event into the IP network
protocol's finite state machine.rw Enumeration .1.3.6.1.4.1.800.2.25.6.1.1.8 |
m013PppxConfigRemoteIpAddressThe Remote IP address of the PPP connection.
If set to 0.0.0.0 and IP routing is enabled
then the IP address will be learned during
the IP LCP negotiation. If set to a value
then no IP address negotiation will occur.rw IpAddress .1.3.6.1.4.1.800.2.25.6.1.1.9 |
m013PppxConfigAuthenticationTypeThe desired Authentication protocol to use for
this PPP connection.rw Enumeration .1.3.6.1.4.1.800.2.25.6.1.1.10 |
m013PppxConfigUserIdToRemoteUser ID sent to remote during PAP or
CHAP Authentication. If this string
is empty, then no local to remote authentication
will occur.rw DisplayString .1.3.6.1.4.1.800.2.25.6.1.1.11 |
m013PppxConfigPasswordToRemotePassword sent to remote during PAP or
CHAP Authentication. If this string
is empty, then no local to remote authentication
will occur.rw DisplayString .1.3.6.1.4.1.800.2.25.6.1.1.12 |
m013PppxConfigUserIdFromRemoteUser ID expected to be received remote during PAP or
CHAP Authentication. If this string
is empty, then no remote to local authentication
will be required.rw DisplayString .1.3.6.1.4.1.800.2.25.6.1.1.13 |
m013PppxConfigPasswordFromRemotePassword expected to be received remote during PAP or
CHAP Authentication. If this string
is empty, then no remote to local authentication
will be required.rw DisplayString .1.3.6.1.4.1.800.2.25.6.1.1.14 |
m013PppxConfigMaxFailureCountPPP LCP and NCP Negotiation Maximum Failure Countrw INTEGER .1.3.6.1.4.1.800.2.25.6.1.1.15 |
m013PppxConfigMaxConfigureCountPPP LCP Negotiation Maximum Configure Countrw INTEGER .1.3.6.1.4.1.800.2.25.6.1.1.16 |
m013PppxConfigMaxTerminateCountPPP LCP Negotiation Maximum Terminate Countrw INTEGER .1.3.6.1.4.1.800.2.25.6.1.1.17 |
m013PppxConfigRetryTimeoutPPP LCP Negotiation Retry Timeoutrw INTEGER .1.3.6.1.4.1.800.2.25.6.1.1.18 |
m013PppxCpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.25.7 |
m013PppxCpTableA table of PPP connection Link Control and Network Control
Protocol status and statistics information. SEQUENCE OF M013PppxCpEntry .1.3.6.1.4.1.800.2.25.7.1 |
m013PppxCpEntryAn entry in the table, containing information about
the PPP LCP and NCP status and statistics. M013PppxCpEntry .1.3.6.1.4.1.800.2.25.7.1.1 |
m013PppxCpSlotIndexA unique value which identifies this WSM board slot
that the PPP Control Protocol Entity is running on.ro INTEGER .1.3.6.1.4.1.800.2.25.7.1.1.1 |
m013PppxCpPortIndexA per-slot unique value which identifies this HDLC logical port.ro INTEGER .1.3.6.1.4.1.800.2.25.7.1.1.2 |
m013PppxCpIpOperStatusThe operational status of the IP network
protocol. If the value of this object is up
then the finite state machine for the IP
network protocol has reached the Opened state.ro Enumeration .1.3.6.1.4.1.800.2.25.7.1.1.3 |
m013PppxCpIpxOperStatusThe operational status of the IPX network
protocol. If the value of this object is up
then the finite state machine for the IP
network protocol has reached the Opened state.ro Enumeration .1.3.6.1.4.1.800.2.25.7.1.1.4 |
m013PppxCpBcpOperStatusThe operational status of the BCP network
protocol. If the value of this object is up
then the finite state machine for the IP
network protocol has reached the Opened state.ro Enumeration .1.3.6.1.4.1.800.2.25.7.1.1.5 |
m013PppxCpTxLcpPacketsThe total number of transmitted Link Control Protocol packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.7.1.1.6 |
m013PppxCpRxLcpPacketsThe total number of received Link Control Protocol packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.7.1.1.7 |
m013PppxCpTxIpcpPacketsThe total number of transmitted IP Control Protocol packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.7.1.1.8 |
m013PppxCpRxIpcpPacketsThe total number of received IP Control Protocol packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.7.1.1.9 |
m013PppxCpTxIpxcpPacketsThe total number of transmitted IPX Control Protocol packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.7.1.1.10 |
m013PppxCpRxIpxcpPacketsThe total number of received IPX Control Protocol packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.7.1.1.11 |
m013PppxCpTxBcpPacketsThe total number of transmitted Bridge Control Protocol packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.7.1.1.12 |
m013PppxCpRxBcpPacketsThe total number of received Bridge Control Protocol packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.7.1.1.13 |
m013PppxStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.25.8 |
m013PppxStatsTableA table of PPP connection
statistics information. SEQUENCE OF M013PppxStatsEntry .1.3.6.1.4.1.800.2.25.8.1 |
m013PppxStatsEntryAn entry in the table, containing information about
the PPP PPP connection statistics. M013PppxStatsEntry .1.3.6.1.4.1.800.2.25.8.1.1 |
m013PppxStatsSlotIndexA unique value which identifies this HSM board slot
that this PPP link is running on.ro INTEGER .1.3.6.1.4.1.800.2.25.8.1.1.1 |
m013PppxStatsPortIndexA per-slot unique value which identifies HDLC channel
that this PPP link is running on.ro INTEGER .1.3.6.1.4.1.800.2.25.8.1.1.2 |
m013PppxStatsTxIPOctetsThe total number of transmitted octets (including
the PPP Header field) within routed IP format packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.3 |
m013PppxStatsTxIPPacketsThe total number of transmitted routed IP format packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.4 |
m013PppxStatsRxIPOctetsThe total number of received octets (including
the PPP Header field) within routed IP format packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.5 |
m013PppxStatsRxIPPacketsThe total number of received routed IP format packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.6 |
m013PppxStatsTxIPXOctetsThe total number of transmitted octets (including
the PPP Header field) within routed IPX format packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.7 |
m013PppxStatsTxIPXPacketsThe total number of transmitted routed IPX format packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.8 |
m013PppxStatsRxIPXOctetsThe total number of received octets (including
the PPP Header field) within routed IPX format packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.9 |
m013PppxStatsRxIPXPacketsThe total number of received routed IPX format packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.10 |
m013PppxStatsTxBPDUOctetsThe total number of transmitted octets (including
the PPP Header field) within BPDU packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.11 |
m013PppxStatsTxBPDUPacketsThe total number of transmitted BPDU packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.12 |
m013PppxStatsRxBPDUOctetsThe total number of received octets (including
the PPP Header field) within BPDU packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.13 |
m013PppxStatsRxBPDUPacketsThe total number of received BPDU packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.14 |
m013PppxStatsTxEthernetOctetsThe total number of transmitted octets (including
the PPP Header field) within bridged 802.3 format
packets on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.15 |
m013PppxStatsTxEthernetPacketsThe total number of transmitted bridged 802.3 format packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.16 |
m013PppxStatsRxEthernetOctetsThe total number of received octets (including
the PPP Header field) within bridged 802.3 format
packets on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.17 |
m013PppxStatsRxEthernetPacketsThe total number of received bridged 802.3 format packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.18 |
m013PppxStatsTx8025OctetsThe total number of transmitted octets (including
the PPP Header field) within 8025 packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.19 |
m013PppxStatsTx8025PacketsThe total number of transmitted 8025 packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.20 |
m013PppxStatsRx8025OctetsThe total number of received octets (including
the PPP Header field) within 8025 packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.21 |
m013PppxStatsRx8025PacketsThe total number of received 8025 packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.22 |
m013PppxStatsTxFDDIOctetsThe total number of transmitted octets (including
the PPP Header field) within FDDI packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.23 |
m013PppxStatsTxFDDIPacketsThe total number of transmitted FDDI packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.24 |
m013PppxStatsRxFDDIOctetsThe total number of received octets (including
the PPP Header field) within FDDI packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.25 |
m013PppxStatsRxFDDIPacketsThe total number of received FDDI packets
on this PPP connection.ro Counter .1.3.6.1.4.1.800.2.25.8.1.1.26 |
m013IPRouterGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.25.9 |
m013IPRouterIfTableA list of M013 Router instances in this
physical OmniSwitch. SEQUENCE OF M013IPRouterIfEntry .1.3.6.1.4.1.800.2.25.9.1 |
m013IPRouterIfEntryA VLAN entry. M013IPRouterIfEntry .1.3.6.1.4.1.800.2.25.9.1.1 |
m013IPRouterIfSlotIndexSlot for channel being provisioned.ro INTEGER .1.3.6.1.4.1.800.2.25.9.1.1.1 |
m013IPRouterIfLogicalPortIndexA per-slot unique HDLC channel number.ro INTEGER .1.3.6.1.4.1.800.2.25.9.1.1.2 |
m013IPRouterIfAddressThe IP address for this IP interfacero IpAddress .1.3.6.1.4.1.800.2.25.9.1.1.3 |
m013IPRouterIfSubNetMaskThe IP network subnet mask for this IP interfacerw IpAddress .1.3.6.1.4.1.800.2.25.9.1.1.4 |
m013IPRouterIfBcastAddressThe IP broadcast address for this IP interfacerw IpAddress .1.3.6.1.4.1.800.2.25.9.1.1.5 |
m013IPRouterIfDescriptionTextual description of the router instance.rw DisplayString .1.3.6.1.4.1.800.2.25.9.1.1.6 |
m013IPRouterIfAdmStatusThe particular routing environment can be
enable(1) or disable(2) (or delete (3))
upon user's request.rw Enumeration .1.3.6.1.4.1.800.2.25.9.1.1.7 |
m013IPRouterIfOperStatusProvide operating status of a particular
router envirnment.ro Enumeration .1.3.6.1.4.1.800.2.25.9.1.1.8 |
m013IPRouterIfFramingTypeProvides the ability to set the outbound frame type for IP
traffic. The default frame type is Ethernet. If the
frame type is incompatible with the transmitting media,
appropriate translation will be performed at egress.rw Enumeration .1.3.6.1.4.1.800.2.25.9.1.1.9 |
m013IPRouterIfMtuProvides the ability to set the MTU size for this IP interface.
The default size is 1500rw INTEGER .1.3.6.1.4.1.800.2.25.9.1.1.10 |
m013IPRouterIfProtocolThe routing protocol(s) for this m013 router port.
Which are:
ipOther(1),
ipRip(2),
ipOspf(4),
ipBgp(8),
ipHello(16),
ipIs-is(32)rw OCTET STRING .1.3.6.1.4.1.800.2.25.9.1.1.11 |
m013Dsx3Group OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.25.10 |
m013Dsx3ConfigTableThe DS3 Configuration table. SEQUENCE OF M013Dsx3ConfigEntry .1.3.6.1.4.1.800.2.25.10.1 |
m013Dsx3ConfigEntryAn entry in the DS3 Configuration table. M013Dsx3ConfigEntry .1.3.6.1.4.1.800.2.25.10.1.1 |
m013Dsx3LineIndexThis object is the identifier of a DS3
port on a managed device.ro INTEGER .1.3.6.1.4.1.800.2.25.10.1.1.1 |
m013Dsx3ChannelizedModeThis object controls whether or not DS3 port is
channelized. The default mode is enabled which means
that this port is channelized to 28 T1s.rw Enumeration .1.3.6.1.4.1.800.2.25.10.1.1.2 |
m013Dsx3MdlEICMDL Equipment Identification Code (EIC).rw OCTET STRING .1.3.6.1.4.1.800.2.25.10.1.1.3 |
m013Dsx3MdlLICMDL Location Identification Code (LIC).rw OCTET STRING .1.3.6.1.4.1.800.2.25.10.1.1.4 |
m013Dsx3MdlFICMDL Frame Identification Code (FIC).rw OCTET STRING .1.3.6.1.4.1.800.2.25.10.1.1.5 |
m013Dsx3MdlUNITMDL Unit Identification Code (UNIT).rw OCTET STRING .1.3.6.1.4.1.800.2.25.10.1.1.6 |
m013Dsx3MdlPFIMDL Path Facility Identification Code (PFI).rw OCTET STRING .1.3.6.1.4.1.800.2.25.10.1.1.7 |
m013Dsx3MdlPortIdleSignalCodeMDL Port Idle Signal Coderw OCTET STRING .1.3.6.1.4.1.800.2.25.10.1.1.8 |
m013Dsx3MdlGeneratorMDL Generator.rw OCTET STRING .1.3.6.1.4.1.800.2.25.10.1.1.9 |
m013Dsx3MdlTransmitPathEnables the MDL path message transmission.rw Enumeration .1.3.6.1.4.1.800.2.25.10.1.1.10 |
m013Dsx3MdlTransmitIdleSignalEnables the MDL idle signal message
transmission.rw Enumeration .1.3.6.1.4.1.800.2.25.10.1.1.11 |
m013Dsx3MdlTransmitTestSignalEnables the MDL test signal message
transmission.rw Enumeration .1.3.6.1.4.1.800.2.25.10.1.1.12 |
m013Dsx3FEACEnableAllows the DS3 to send the following alarms
on the FEAC channel when detected locally:
- DS3 Equipment Failure
- LOS
- OOF
- AIS Received
.rw Enumeration .1.3.6.1.4.1.800.2.25.10.1.1.13 |
m013Dsx3REIEnableAllows the DS3 to send Remote Error Indications.rw Enumeration .1.3.6.1.4.1.800.2.25.10.1.1.14 |
m013Dsx3RxMdlEnableAllows the DS3 to receive MDL messages.rw Enumeration .1.3.6.1.4.1.800.2.25.10.1.1.15 |
m013Dsx3RxMdlEICReceived MDL Equipment Identification Code (EIC).rw OCTET STRING .1.3.6.1.4.1.800.2.25.10.1.1.16 |
m013Dsx3RxMdlLICReceived MDL Location Identification Code (LIC).rw OCTET STRING .1.3.6.1.4.1.800.2.25.10.1.1.17 |
m013Dsx3RxMdlFICReceived MDL Frame Identification Code (FIC).rw OCTET STRING .1.3.6.1.4.1.800.2.25.10.1.1.18 |
m013Dsx3RxMdlUNITReceived MDL Unit Identification Code (UNIT).rw OCTET STRING .1.3.6.1.4.1.800.2.25.10.1.1.19 |
m013Dsx3RxMdlPFIReceived MDL Path Facility Identification Code (PFI).rw OCTET STRING .1.3.6.1.4.1.800.2.25.10.1.1.20 |
m013Dsx3RxMdlPortIdleSignalCodeReceived MDL Port Idle Signal Coderw OCTET STRING .1.3.6.1.4.1.800.2.25.10.1.1.21 |
m013Dsx3RxMdlGeneratorReceived MDL Generator.rw OCTET STRING .1.3.6.1.4.1.800.2.25.10.1.1.22 |
m013Dsx3RemoteStatusThis variable indicates the
Remote Line Status of the interface.ro INTEGER .1.3.6.1.4.1.800.2.25.10.1.1.23 |
m013Dsx3RemoteStatusLastChangeThe value of MIB II's sysUpTime object at the
time the Remote DS3/E3 entered its current line status
state. If the current state was entered prior to
the last re-initialization of the proxy-agent,
then this object contains a zero value.ro INTEGER .1.3.6.1.4.1.800.2.25.10.1.1.24 |
m013Dsx3LedStatusThe LED state for this M013 Port.
M013 module has 5 LEDs per port. The current bit
definitions for the DS3 Port are:
T3EN 0 - GRN OFF (0 off, 1 on)
LOS 1 - RED OFF (0 off, 1 on)
OOF 2 - RED OFF (0 off, 1 on)
AIS 3 - RED OFF (0 off, 1 on)
RAI 4 - YEL OFF (0 off, 1 on)ro INTEGER .1.3.6.1.4.1.800.2.25.10.1.1.25 |
m013Dsx3Ds1StatsEnableMaskThis is a 28 bit mask which allows selectively
enable/disable stats collection on a particular
DS1 within DS3 port. Each bit corresponds to one
of the 28 DS1 within DS3 port.rw INTEGER .1.3.6.1.4.1.800.2.25.10.1.1.26 |
m013Dsx3StatsTableThe DS3 Statistics table. SEQUENCE OF M013Dsx3StatsEntry .1.3.6.1.4.1.800.2.25.10.2 |
m013Dsx3StatsEntryAn entry in the DS3 Statistics table. M013Dsx3StatsEntry .1.3.6.1.4.1.800.2.25.10.2.1 |
m013Dsx3StatsLineIndexThis object is the identifier of a DS3
port on a managed device.ro INTEGER .1.3.6.1.4.1.800.2.25.10.2.1.1 |
m013Dsx3StatsRxREIThe number of Remote Error Indications received.ro Counter .1.3.6.1.4.1.800.2.25.10.2.1.2 |
m013Dsx3StatsRxFEACThis object indicates the presence FEAC being received by
this port. This object only applies to DS3 interface with
framing format configured to C-bit parity. A value of
dsx3NoFEAC(1) is returned for other cases.ro Enumeration .1.3.6.1.4.1.800.2.25.10.2.1.3 |
m013Dsx1Group OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.25.11 |
m013Dsx1ConfigTableThe DS1 Configuration table. SEQUENCE OF M013Dsx1ConfigEntry .1.3.6.1.4.1.800.2.25.11.1 |
m013Dsx1ConfigEntryAn entry in the DS3 Configuration table. M013Dsx1ConfigEntry .1.3.6.1.4.1.800.2.25.11.1.1 |
m013Dsx1LineIndexThis object is the identifier of a DS1
port on a managed device.ro INTEGER .1.3.6.1.4.1.800.2.25.11.1.1.1 |
m013Dsx1T1BertPatternThis variable represents T1 BERT Pattern configuration.
The values mean:
1 - 2^15-1, pseudo-random O.151 test pattern (32767-bit long)
2 - 2^20-1, pseudo-random O.151 test pattern (1048575-bit long)
3 - 2^20-QRSS, pseudo-random QRSS O.151 test pattern (1048575-bit long)
4 - 2^23-1, pseudo-random O.151 test pattern (8388607-bit long)
5 - 0s, respective test pattern of all zeros
6 - 1s, respective test pattern of all onesrw INTEGER .1.3.6.1.4.1.800.2.25.11.1.1.2 |
m013Dsx1T1BertIntervalT1 BERT Intervalrw INTEGER .1.3.6.1.4.1.800.2.25.11.1.1.3 |
m013Dsx1T1BertFramingT1 BERT Framingrw Enumeration .1.3.6.1.4.1.800.2.25.11.1.1.4 |
m013Dsx1T1BertTestEnableT1 BERT Start/Stoprw Enumeration .1.3.6.1.4.1.800.2.25.11.1.1.5 |
m013Dsx1RemoteStatusThis variable indicates the
Remote Line Status of the interface.ro INTEGER .1.3.6.1.4.1.800.2.25.11.1.1.6 |
m013Dsx1RemoteStatusLastChangeThe value of MIB II's sysUpTime object at the
time the Remote DS1 entered its current line status
state. If the current state was entered prior to
the last re-initialization of the proxy-agent,
then this object contains a zero value.ro INTEGER .1.3.6.1.4.1.800.2.25.11.1.1.7 |