XYLAN-ATM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for XYLAN-ATM-MIB.
361
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
361 total| Object Name |
|---|
atmxPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.4.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.800.2.4.1 |
atmxPortTableA table of port layer status and parameter information
for the UNI's physical interface. SEQUENCE OF AtmxPortEntry .1.3.6.1.4.1.800.2.4.1.1 |
atmxPortEntryAn entry in the table, containing information about
the physical layer of a UNI interface. AtmxPortEntry .1.3.6.1.4.1.800.2.4.1.1.1 |
atmxPortSlotIndexA unique value which identifies this hsm board slot.ro INTEGER .1.3.6.1.4.1.800.2.4.1.1.1.1 |
atmxPortPortIndexA unique value which identifies this atm submodule port.ro INTEGER .1.3.6.1.4.1.800.2.4.1.1.1.2 |
atmxPortDescriptionA description for this atm port.rw DisplayString .1.3.6.1.4.1.800.2.4.1.1.1.3 |
atmxPortConnectionTypeThe connection type of this board.rw Enumeration .1.3.6.1.4.1.800.2.4.1.1.1.4 |
atmxPortTransmissionTypeThe transmission type of this port. For example, for a port using
the Sonet STS-3c physical layer at 155.52 Mbs, this object would
have the Object Identifier value: atmxSonetSTS3c.ro AtmTransmissionTypes .1.3.6.1.4.1.800.2.4.1.1.1.5 |
atmxPortMediaTypeThe type of media being used on this port. For example for a port
using coaxial cable, the object would have the Object Identifier
value: atmxMediaCoaxCable.ro AtmMediaTypes .1.3.6.1.4.1.800.2.4.1.1.1.6 |
atmxPortOperStatusThe operational state (i.e., actual) of this port.
The ILMI should not alarm on a physical interface for when the
value of this object is outOfService(3). This capability is useful
if the equipment is to be disconnected, or for troubleshooting
purposes.
A value of loopBack(4) indicates that a local loopback is in place.ro AtmOperStatCodes .1.3.6.1.4.1.800.2.4.1.1.1.7 |
atmxPortUniTypeThe type of the ATM UNI, either public or private.rw Enumeration .1.3.6.1.4.1.800.2.4.1.1.1.8 |
atmxPortMaxVCCsThe maximum number of VCCs supported on this UNI.ro INTEGER .1.3.6.1.4.1.800.2.4.1.1.1.9 |
atmxPortMaxVciBitsThe number of active VCI bits on this interface.ro INTEGER .1.3.6.1.4.1.800.2.4.1.1.1.10 |
atmxPortTxSegmentSizeThe transmit segment size on this UNI. The nearest power of two
less than or equal to this value will be used internally.
The max memory is 512K, therefore the maximum number of
channels will be 512K/internal tx seg size.rw INTEGER .1.3.6.1.4.1.800.2.4.1.1.1.11 |
atmxPortRxSegmentSizeThe receive segment size on this UNI. The nearest power of two
less than or equal to this value will be used internally.
The max memory is 512K, therefore the maximum number of
channels will be 512K/internal rx seg size.rw INTEGER .1.3.6.1.4.1.800.2.4.1.1.1.12 |
atmxPortTxBufferSizeThe transmit buffer size on this UNI. The buffer size must be less
than or equal to the segment size and should be greater than or
equal to the maximum frame size.rw INTEGER .1.3.6.1.4.1.800.2.4.1.1.1.13 |
atmxPortRxBufferSizeThe receive buffer size on this UNI. The buffer size must be less
than or equal to the segment size and should be greater than or
equal to the maximum frame size.rw INTEGER .1.3.6.1.4.1.800.2.4.1.1.1.14 |
atmxPortUniPortIndexThis object should not be implemented except as required for
backward compatibility with version 2.0 of the UNI specification.
This object provide a port index link to the UNI MIBrodeprecated INTEGER .1.3.6.1.4.1.800.2.4.1.1.1.15 |
atmxPortAddressThis object should not be implemented except as required for
backward compatibility with version 2.0 of the UNI specification.
The Address Group, as defined as part of the separate Address
Registration MIB should be used instead.rw DisplayString .1.3.6.1.4.1.800.2.4.1.1.1.16 |
atmxPortSignalingVersionVersion of the ATM forum UNI Signaling.rw Enumeration .1.3.6.1.4.1.800.2.4.1.1.1.17 |
atmxPortSignalingVciSignaling Vci.rw INTEGER .1.3.6.1.4.1.800.2.4.1.1.1.18 |
atmxPortILMIVciILMI Vci.rw INTEGER .1.3.6.1.4.1.800.2.4.1.1.1.19 |
atmxPortEnableILMIILMI Enable.rw Enumeration .1.3.6.1.4.1.800.2.4.1.1.1.20 |
atmxPortPlScramblePayload Scrambling Enable.rw Enumeration .1.3.6.1.4.1.800.2.4.1.1.1.21 |
atmxPortTimingModeTiming mode to use. Use local timing or
loop timing.rw Enumeration .1.3.6.1.4.1.800.2.4.1.1.1.22 |
atmxPortProtocolTypePhysical layer protocol type.rw Enumeration .1.3.6.1.4.1.800.2.4.1.1.1.23 |
atmxPortLoopbackConfigLoopback config. for this physical layer.
1 = NoLoop,
2 = DiagLoop,
3 = LineLoop,
4 = CellLoop,
5 = PayloadLooprw INTEGER .1.3.6.1.4.1.800.2.4.1.1.1.24 |
atmxPortSSCOPstatusSSCOP status of this physical layer.ro Enumeration .1.3.6.1.4.1.800.2.4.1.1.1.25 |
atmxPortILMIstatusILMI status of this physical layer.ro Enumeration .1.3.6.1.4.1.800.2.4.1.1.1.26 |
atmxServiceGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.4.2 |
atmxServiceTableA table of ATM services status and parameter information. SEQUENCE OF AtmxServiceEntry .1.3.6.1.4.1.800.2.4.2.1 |
atmxServiceEntryAn entry in the table, containing information about
the ATM services. AtmxServiceEntry .1.3.6.1.4.1.800.2.4.2.1.1 |
atmxServiceSlotIndexA unique value which identifies this hsm board slot.rw INTEGER .1.3.6.1.4.1.800.2.4.2.1.1.1 |
atmxServicePortIndexA unique value which identifies this atm submodule port.rw INTEGER .1.3.6.1.4.1.800.2.4.2.1.1.2 |
atmxServiceNumberThe unique service number for this particular slot/port.rw INTEGER .1.3.6.1.4.1.800.2.4.2.1.1.3 |
atmxServiceDescriptionA description for this atm service.rw DisplayString .1.3.6.1.4.1.800.2.4.2.1.1.4 |
atmxServiceTypeThe service type.
For 1483 Scaling Service, create it only with 1 group
and 1 vc thru this atmxServiceGroup. Adding Other group-to-vc
mapping should utilize the atmx1483ScaleGroup.rw Enumeration .1.3.6.1.4.1.800.2.4.2.1.1.5 |
atmxServiceConnectionTypeThe connection type of this board.rw Enumeration .1.3.6.1.4.1.800.2.4.2.1.1.6 |
atmxServiceOperStatusThe service operational status.ro AtmServiceOperStatCodes .1.3.6.1.4.1.800.2.4.2.1.1.7 |
atmxServiceAdmStatusThe service adminstration status.rw AtmAdminStatCodes .1.3.6.1.4.1.800.2.4.2.1.1.8 |
atmxServiceEncapsTypeThe service encapsulation type. This object is
applicable only to PTOP service.rw Enumeration .1.3.6.1.4.1.800.2.4.2.1.1.9 |
atmxServiceArpRequestServerThe Arp request server.
0 = not applicable,
1 = Non arp server,
2 = arp server.rw INTEGER .1.3.6.1.4.1.800.2.4.2.1.1.10 |
atmxServiceConnectionsThe connections for this service. Interpret this as a 16 bit
field per connection: Trunking 1, PTOP Bridging 1,
Classical IP 1..255.
For Vlan cluster, this object is interpreted as a 32 bit field
where each 32 bit represent the vci value of the Data Direct vcc
and the Multicast In vcc. Each vcc take up 16 bits. There can
be up to 32 pairs of Data Direct vcc and Mulitcast In vcc.
For 1483 Scaling Service, create it only with 1 group
and 1 vc thru this atmxServiceGroup. Adding Other group-to-vc
mapping should utilize the atmx1483ScaleGroup.rw OCTET STRING .1.3.6.1.4.1.800.2.4.2.1.1.11 |
atmxServiceAddressThe unique service address.rw DisplayString .1.3.6.1.4.1.800.2.4.2.1.1.12 |
atmxServiceAddressesThe addresses for this service. Interpret this as a 16 bit
field per address: Trunking 1, PTOP Bridging 1, Classical IP 1..255.rw OCTET STRING .1.3.6.1.4.1.800.2.4.2.1.1.13 |
atmxServiceVlanThe Vlans for this service. Interpret this as a 16 bit field
per vlan: Trunking 1-32, PTOP Bridging 1, Classical IP 1.
For Vlan Cluster, it will depend on the encapsulation type
selected. If RFC 1483, only 1 vlan while Xylan ATM trunking
up to 32 vlans are allowed.
For 1483 Scaling Service, create it only with 1 group
and 1 vc thru this atmxServiceGroup. Adding Other group-to-vc
mapping should utilize the atmx1483ScaleGroup.rw OCTET STRING .1.3.6.1.4.1.800.2.4.2.1.1.14 |
atmxServiceSELThe SEL for the ATM address of this service.rw INTEGER .1.3.6.1.4.1.800.2.4.2.1.1.15 |
atmxServiceLaneCfgTblIdxIndex to the LAN Emulation Configuration Table.
This index is only used when the Service type is
ATM LAN Emulation. For other service type this
should be set to zero (0).rw INTEGER .1.3.6.1.4.1.800.2.4.2.1.1.16 |
atmxServiceMulticastOutVccThe Multicast Out VCC for this Vlan Cluster (X-LANE)
service. This is only applicable to service type
Vlan Cluster. For other ATM services, this object
will return a zero (0). For Vlan Cluster service
if a zero (0) is returned means no Multicast out
is specified.rw INTEGER .1.3.6.1.4.1.800.2.4.2.1.1.17 |
atmxServiceNumVclMembersThe number of other Vlan cluster members defined
and have a data direct VCC associated with the
connection. This object is valid only for Vlan
cluster services. Zero (0) will be returned for
other ATM services.rw INTEGER .1.3.6.1.4.1.800.2.4.2.1.1.18 |
atmxServiceVclEncapTypeThe Encapsulation type for the Vlan Cluster
service.
1 = RFC 1483 encapsulation.
2 = Xylan ATM trunking.
3 = not applicable.
This object is only valid for Vlan cluster
services. All other ATM services will return
a value of 3.
If the encapsulation type is RFC 1483, only
one (1) vlan as defined in atmxServiceVlan
can be associated with this service. If
encapsulation type is Xylan ATM trunking more
than 1 vlan can be assocated with this service.rw INTEGER .1.3.6.1.4.1.800.2.4.2.1.1.19 |
atmxServiceSahiBwgNumThe bwg num for sahi based hsm's. The user can set the
pcr, scr, mbs using the bwg table and chose the desired
bwg num for this service ensuring that this service obtains
the desired bandwidthrw INTEGER .1.3.6.1.4.1.800.2.4.2.1.1.20 |
atmxLayerStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.4.3 |
atmxLayerStatsTableA table of ATM layer statistics information. SEQUENCE OF AtmxLayerStatsEntry .1.3.6.1.4.1.800.2.4.3.1 |
atmxLayerStatsEntryAn entry in the table, containing information about
the ATM layer statistics. AtmxLayerStatsEntry .1.3.6.1.4.1.800.2.4.3.1.1 |
atmxLayerStatsSlotIndexA unique value which identifies this hsm board slot.ro INTEGER .1.3.6.1.4.1.800.2.4.3.1.1.1 |
atmxLayerStatsPortIndexA unique value which identifies this atm submodule port.ro INTEGER .1.3.6.1.4.1.800.2.4.3.1.1.2 |
atmxLayerStatsTxSDUsThe total number of successfully transmitted SDU's on the physical port.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.3 |
atmxLayerStatsTxCellsThe total number of successfully transmitted cells.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.4 |
atmxLayerStatsTxOctetsThe total number of successfully transmitted octets.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.5 |
atmxLayerStatsRxSDUsThe total number of successfully received SDU's.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.6 |
atmxLayerStatsRxCellsThe total number of successfully received cells.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.7 |
atmxLayerStatsRxOctetsThe total number of successfully received octets.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.8 |
atmxLayerStatsTxSDUDiscardsThe total number of transmit SDUs that are discarded.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.9 |
atmxLayerStatsTxSDUErrorsThe total number of transmit SDU with errors.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.10 |
atmxLayerStatsTxSDUNoBuffersThe number of transmitted SDU's with no buffers available
on the physical port.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.11 |
atmxLayerStatsTxCellDiscardsThe total number of transmit cells that are dicscarded.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.12 |
atmxLayerStatsTxCellErrorsThe total number of transmit cell with errors.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.13 |
atmxLayerStatsTxCellNoBuffersThe total number of transmit cell with no buffers available.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.14 |
atmxLayerStatsRxSDUDiscardsThe total number of receive SDU's that are discarded.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.15 |
atmxLayerStatsRxSDUErrorsThe total number of receive SDU's with errors.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.16 |
atmxLayerStatsRxSDUInvalidSzThe total number of receive SDU's with invalid sizero Counter .1.3.6.1.4.1.800.2.4.3.1.1.17 |
atmxLayerStatsRxSDUNoBuffersThe total number of receive SDU's with no buffersro Counter .1.3.6.1.4.1.800.2.4.3.1.1.18 |
atmxLayerStatsRxSDUTrashThe total number of receive trash SDU'sro Counter .1.3.6.1.4.1.800.2.4.3.1.1.19 |
atmxLayerStatsRxSDUCrcErrorsThe total number of receive SDU's with crc errorsro Counter .1.3.6.1.4.1.800.2.4.3.1.1.20 |
atmxLayerStatsRxCellDiscardsThe total number of receive cells that are discarded.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.21 |
atmxLayerStatsRxCellErrorsThe total number of recieve cell with errorsro Counter .1.3.6.1.4.1.800.2.4.3.1.1.22 |
atmxLayerStatsRxCellNoBuffersThe total number of receive cell with no buffersro Counter .1.3.6.1.4.1.800.2.4.3.1.1.23 |
atmxLayerStatsRxCellTrashThe total number of recieve trash cells.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.24 |
atmxLayerStatsRxCellCrcErrorsThe total number of receive cells with crc errors.ro Counter .1.3.6.1.4.1.800.2.4.3.1.1.25 |
atmxVccStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.4.4 |
atmxVccStatsTableA table of ATM virtual channel connection statistics information. SEQUENCE OF AtmxVccStatsEntry .1.3.6.1.4.1.800.2.4.4.1 |
atmxVccStatsEntryAn entry in the table, containing information about
the ATM virtual channel connection statistics. AtmxVccStatsEntry .1.3.6.1.4.1.800.2.4.4.1.1 |
atmxVccStatsSlotIndexA unique value which identifies this hsm board slot.ro INTEGER .1.3.6.1.4.1.800.2.4.4.1.1.1 |
atmxVccStatsPortIndexA unique value which identifies this atm submodule port.ro INTEGER .1.3.6.1.4.1.800.2.4.4.1.1.2 |
atmxVccStatsVciA unique value which identifies this atm port.ro INTEGER .1.3.6.1.4.1.800.2.4.4.1.1.3 |
atmxVccStatsTxSDUsThe total number of transmitted SDU's on this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.4 |
atmxVccStatsTxCellsThe total number of transmitted cells on this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.5 |
atmxVccStatsTxOctetsThe total number of transmitted octets on this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.6 |
atmxVccStatsRxSDUsThe total number of received SDU's on this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.7 |
atmxVccStatsRxCellsThe total number of received cells on this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.8 |
atmxVccStatsRxOctetsThe total number of received octets on this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.9 |
atmxVccStatsTxSDUDiscardsThe total number of transmit SDU discards on
this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.10 |
atmxVccStatsTxSDUErrorsThe total number of transmit SDU errors on
this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.11 |
atmxVccStatsTxSDUNoBuffersThe number of transmit SDU's with no buffers on
this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.12 |
atmxVccStatsTxCellDiscardsThe total number of transmit cells that are dicscarded on
this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.13 |
atmxVccStatsTxCellErrorsThe total number of transmit cell with errors on
this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.14 |
atmxVccStatsTxCellNoBuffersThe total number of transmit cell with no buffers on
this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.15 |
atmxVccStatsRxSDUDiscardsThe total number of receive SDU's discarded on
this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.16 |
atmxVccStatsRxSDUErrorsThe total number of receive SDU's with errors on
this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.17 |
atmxVccStatsRxSDUInvalidSzThe total number of received SDU's with invalid size
on this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.18 |
atmxVccStatsRxSDUNoBuffersThe total number of receive SDU's with no buffers
on this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.19 |
atmxVccStatsRxSDUTrashThe total number of receive trash SDU's on
this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.20 |
atmxVccStatsRxSDUCrcErrorsThe total number of receive SDU's crc errors on
this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.21 |
atmxVccStatsRxCellDiscardsThe total number of receive cells discarded
on this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.22 |
atmxVccStatsRxCellErrorsThe total number of recieve cell with errors on
this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.23 |
atmxVccStatsRxCellNoBuffersThe total number of receive cells with no buffers
on this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.24 |
atmxVccStatsRxCellTrashThe total number of recieve trash cells on
this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.25 |
atmxVccStatsRxCellCrcErrorsThe total number of receive cells with crc errors
on this virtual channel.ro Counter .1.3.6.1.4.1.800.2.4.4.1.1.26 |
atmxVccGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.4.5 |
atmxVccTableA table of ATM virtual channel connections status and
parameter information. SEQUENCE OF AtmxVccEntry .1.3.6.1.4.1.800.2.4.5.1 |
atmxVccEntryAn entry in the table, containing information about
the ATM virtual channel connections. AtmxVccEntry .1.3.6.1.4.1.800.2.4.5.1.1 |
atmxVccSlotIndexA unique value which identifies this hsm board slot.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.1 |
atmxVccPortIndexA unique value which identifies this atm submodule port.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.2 |
atmxVccVpiThe virtual path identifier associated with this
virtual connection.ro INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.3 |
atmxVccVciThe virtual channel identifier associated with the
virtual connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.4 |
atmxVccDescriptionA description for this virtual connection.rw DisplayString .1.3.6.1.4.1.800.2.4.5.1.1.5 |
atmxVccConnTypeThe virtual connection type.rw Enumeration .1.3.6.1.4.1.800.2.4.5.1.1.6 |
atmxVccCircuitTypeThe virtual connection circuit type.rw Enumeration .1.3.6.1.4.1.800.2.4.5.1.1.7 |
atmxVccOperStatusThe actual operational status of the VCC
A value of end2endUp(2) or end2endDown(3) would be used if end-to-end
status is known. If only local status information is available, a value
of localUpEnd2endUnknown(4) or localDown(5) would be used.ro AtmConnectionOperStatCodes .1.3.6.1.4.1.800.2.4.5.1.1.8 |
atmxVccUpTimeThe virtual channel connection up time for this connection.ro DisplayString .1.3.6.1.4.1.800.2.4.5.1.1.9 |
atmxVccDownTimeThe virtual channel connection down time for this connection.ro DisplayString .1.3.6.1.4.1.800.2.4.5.1.1.10 |
atmxVccTransmitMaxFrameSizeThe virtual channel connection maximum transmit frame size
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.11 |
atmxVccReceiveMaxFrameSizeThe virtual channel connection maximum receive frame size
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.12 |
atmxVccRequestedTransmitTrafficDescriptorThe virtual channel connection traffic descriptor
for this connection.rw AtmTrafficDescrTypes .1.3.6.1.4.1.800.2.4.5.1.1.13 |
atmxVccRequestedTransmitTrafficDescriptorParam1The virtual channel connection traffic parameter 1
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.14 |
atmxVccRequestedTransmitTrafficDescriptorParam2The virtual channel connection traffic parameter 2
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.15 |
atmxVccRequestedTransmitTrafficDescriptorParam3The virtual channel connection traffic parameter 3
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.16 |
atmxVccRequestedTransmitTrafficQoSClassThe virtual channel connection QOS Class for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.17 |
atmxVccRequestedTransmitTrafficBestEffortThe virtual channel connection best effort value
for this connection.rw Enumeration .1.3.6.1.4.1.800.2.4.5.1.1.18 |
atmxVccRequestedReceiveTrafficDescriptorThe virtual channel connection traffic descriptor
for this connection.rw AtmTrafficDescrTypes .1.3.6.1.4.1.800.2.4.5.1.1.19 |
atmxVccRequestedReceiveTrafficDescriptorParam1The virtual channel connection traffic parameter 1
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.20 |
atmxVccRequestedReceiveTrafficDescriptorParam2The virtual channel connection traffic parameter 2
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.21 |
atmxVccRequestedReceiveTrafficDescriptorParam3The virtual channel connection traffic parameter 3
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.22 |
atmxVccRequestedReceiveTrafficQoSClassThe virtual channel connection traffic QOS Class
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.23 |
atmxVccRequestedReceiveTrafficBestEffortThe virtual channel connection best effort value
for this connection.rw Enumeration .1.3.6.1.4.1.800.2.4.5.1.1.24 |
atmxVccAcceptableTransmitTrafficDescriptorThe virtual channel connection traffic descriptor
for this connection.rw AtmTrafficDescrTypes .1.3.6.1.4.1.800.2.4.5.1.1.25 |
atmxVccAcceptableTransmitTrafficDescriptorParam1The virtual channel connection traffic parameter 1
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.26 |
atmxVccAcceptableTransmitTrafficDescriptorParam2The virtual channel connection traffic parameter 2
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.27 |
atmxVccAcceptableTransmitTrafficDescriptorParam3The virtual channel connection traffic parameter 3
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.28 |
atmxVccAcceptableTransmitTrafficQoSClassThe virtual channel connection QOS Class for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.29 |
atmxVccAcceptableTransmitTrafficBestEffortThe virtual channel connection best effort value
for this connection.rw Enumeration .1.3.6.1.4.1.800.2.4.5.1.1.30 |
atmxVccAcceptableReceiveTrafficDescriptorThe virtual channel connection traffic descriptor
for this connection.rw AtmTrafficDescrTypes .1.3.6.1.4.1.800.2.4.5.1.1.31 |
atmxVccAcceptableReceiveTrafficDescriptorParam1The virtual channel connection traffic parameter 1
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.32 |
atmxVccAcceptableReceiveTrafficDescriptorParam2The virtual channel connection traffic parameter 2
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.33 |
atmxVccAcceptableReceiveTrafficDescriptorParam3The virtual channel connection traffic parameter 3
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.34 |
atmxVccAcceptableReceiveTrafficQoSClassThe virtual channel connection traffic QOS Class
for this connection.rw INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.35 |
atmxVccAcceptableReceiveTrafficBestEffortThe virtual channel connection best effort value
for this connection.rw Enumeration .1.3.6.1.4.1.800.2.4.5.1.1.36 |
atmxVccActualTransmitTrafficDescriptorThe virtual channel connection traffic descriptor
for this connection.ro AtmTrafficDescrTypes .1.3.6.1.4.1.800.2.4.5.1.1.37 |
atmxVccActualTransmitTrafficDescriptorParam1The virtual channel connection traffic parameter 1
for this connection.ro INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.38 |
atmxVccActualTransmitTrafficDescriptorParam2The virtual channel connection traffic parameter 2
for this connection.ro INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.39 |
atmxVccActualTransmitTrafficDescriptorParam3The virtual channel connection traffic parameter 3
for this connection.ro INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.40 |
atmxVccActualTransmitTrafficQoSClassThe virtual channel connection QOS Class for this connection.ro INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.41 |
atmxVccActualTransmitTrafficBestEffortThe virtual channel connection best effort value
for this connection.ro Enumeration .1.3.6.1.4.1.800.2.4.5.1.1.42 |
atmxVccActualReceiveTrafficDescriptorThe virtual channel connection traffic descriptor
for this connection.ro AtmTrafficDescrTypes .1.3.6.1.4.1.800.2.4.5.1.1.43 |
atmxVccActualReceiveTrafficDescriptorParam1The virtual channel connection traffic parameter 1
for this connection.ro INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.44 |
atmxVccActualReceiveTrafficDescriptorParam2The virtual channel connection traffic parameter 2
for this connection.ro INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.45 |
atmxVccActualReceiveTrafficDescriptorParam3The virtual channel connection traffic parameter 3
for this connection.ro INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.46 |
atmxVccActualReceiveTrafficQoSClassThe virtual channel connection traffic QOS Class
for this connection.ro INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.47 |
atmxVccActualReceiveTrafficBestEffortThe virtual channel connection best effort value
for this connection.ro Enumeration .1.3.6.1.4.1.800.2.4.5.1.1.48 |
atmxVccAdmStatusThe vcc adminstration status - used to delete a vcc.rw AtmAdminStatCodes .1.3.6.1.4.1.800.2.4.5.1.1.49 |
atmxVccServiceUsedThe service number in which this vcc connection is used.ro INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.50 |
atmxVccConnectionUsedConnection being used or not being used, currently not implemented.ro INTEGER .1.3.6.1.4.1.800.2.4.5.1.1.51 |
atmxAddressGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.4.6 |
atmxAddressTableA table of ATM virtual address status and parameter information. SEQUENCE OF AtmxAddressEntry .1.3.6.1.4.1.800.2.4.6.1 |
atmxAddressEntryAn entry in the table, containing information about
the ATM virtual address. AtmxAddressEntry .1.3.6.1.4.1.800.2.4.6.1.1 |
atmxAddressIndexA unique value which identifies this address index.ro INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.1 |
atmxAddressAtmAddressA unique value which identifies this address.rw DisplayString .1.3.6.1.4.1.800.2.4.6.1.1.2 |
atmxAddressTypeThe address type.rw Enumeration .1.3.6.1.4.1.800.2.4.6.1.1.3 |
atmxAddressVpiThe virtual path identifier associated with this address.ro INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.4 |
atmxAddressVciThe virtual channel identifier associated with this address.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.5 |
atmxAddressDescriptionA description for this address.rw DisplayString .1.3.6.1.4.1.800.2.4.6.1.1.6 |
atmxAddressTransmitMaxSDUThe address maximum transmit SDU size in bytes for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.7 |
atmxAddressReceiveMaxSDUThe address maximun receive SDU size in bytes for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.8 |
atmxAddressRequestedTransmitTrafficDescriptorThe address traffic descriptor for this SVC.rw AtmTrafficDescrTypes .1.3.6.1.4.1.800.2.4.6.1.1.9 |
atmxAddressRequestedTransmitTrafficDescriptorParam1The address transmit parameter 1 cell rate in cells/second for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.10 |
atmxAddressRequestedTransmitTrafficDescriptorParam2The address transmit parameter 2 cell rate in cells/second for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.11 |
atmxAddressRequestedTransmitTrafficDescriptorParam3The address transmit parameter 3 cell rate in cells for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.12 |
atmxAddressRequestedTransmitTrafficQoSClassThe address transmit traffic QOS Class for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.13 |
atmxAddressRequestedTransmitTrafficBestEffortThe address transmit traffic best effort value for this SVC.rw Enumeration .1.3.6.1.4.1.800.2.4.6.1.1.14 |
atmxAddressRequestedReceiveTrafficDescriptorThe address receive traffic descriptor for this SVC.rw AtmTrafficDescrTypes .1.3.6.1.4.1.800.2.4.6.1.1.15 |
atmxAddressRequestedReceiveTrafficDescriptorParam1The address receive parameter 1 cell rate in cells/second for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.16 |
atmxAddressRequestedReceiveTrafficDescriptorParam2The address receive parameter 2 cell rate in cells/second for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.17 |
atmxAddressRequestedReceiveTrafficDescriptorParam3The address receive parameter 2 cell rate in cells for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.18 |
atmxAddressRequestedReceiveTrafficQoSClassThe address receive traffic QOS Class for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.19 |
atmxAddressRequestedReceiveTrafficBestEffortThe address receive traffic best effort value for this SVC.rw Enumeration .1.3.6.1.4.1.800.2.4.6.1.1.20 |
atmxAddressAcceptableTransmitTrafficDescriptorThe address traffic descriptor for this SVC.rw AtmTrafficDescrTypes .1.3.6.1.4.1.800.2.4.6.1.1.21 |
atmxAddressAcceptableTransmitTrafficDescriptorParam1The address transmit parameter 1 cell rate in cells/second for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.22 |
atmxAddressAcceptableTransmitTrafficDescriptorParam2The address transmit parameter 2 cell rate in cells/second for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.23 |
atmxAddressAcceptableTransmitTrafficDescriptorParam3The address transmit parameter 3 cell rate in cells for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.24 |
atmxAddressAcceptableTransmitTrafficQoSClassThe address transmit traffic QOS Class for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.25 |
atmxAddressAcceptableTransmitTrafficBestEffortThe address transmit traffic best effort value for this SVC.rw Enumeration .1.3.6.1.4.1.800.2.4.6.1.1.26 |
atmxAddressAcceptableReceiveTrafficDescriptorThe address receive traffic descriptor for this SVC.rw AtmTrafficDescrTypes .1.3.6.1.4.1.800.2.4.6.1.1.27 |
atmxAddressAcceptableReceiveTrafficDescriptorParam1The address receive parameter 1 cell rate in cells/second for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.28 |
atmxAddressAcceptableReceiveTrafficDescriptorParam2The address receive parameter 2 cell rate in cells/second for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.29 |
atmxAddressAcceptableReceiveTrafficDescriptorParam3The address receive parameter 2 cell rate in cells for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.30 |
atmxAddressAcceptableReceiveTrafficQoSClassThe address receive traffic QOS Class for this SVC.rw INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.31 |
atmxAddressAcceptableReceiveTrafficBestEffortThe address receive traffic best effort value for this SVC.rw Enumeration .1.3.6.1.4.1.800.2.4.6.1.1.32 |
atmxAddressAdmStatusThe address adminstration status - used to delete an address.rw AtmAdminStatCodes .1.3.6.1.4.1.800.2.4.6.1.1.33 |
atmxAddressServiceUsedThe service number in which this address is used.ro INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.34 |
atmxAddressAddrUsedAddress being used or not being used, currently not implemented.ro INTEGER .1.3.6.1.4.1.800.2.4.6.1.1.35 |
atmxArpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.4.7 |
atmxArpTableA table of ATM address to IP address information. SEQUENCE OF AtmxArpEntry .1.3.6.1.4.1.800.2.4.7.1 |
atmxArpEntryAn entry in the table, containing information about
the ATM address. AtmxArpEntry .1.3.6.1.4.1.800.2.4.7.1.1 |
atmxArpIndexA unique value which identifies this arp entry.ro INTEGER .1.3.6.1.4.1.800.2.4.7.1.1.1 |
atmxArpIPAddressThe IP address for this atm address.ro IpAddress .1.3.6.1.4.1.800.2.4.7.1.1.2 |
atmxArpAtmAddressA unique value which identifies this address.ro DisplayString .1.3.6.1.4.1.800.2.4.7.1.1.3 |
atmxArpVciThe virtual channel identifier associated with this address.ro INTEGER .1.3.6.1.4.1.800.2.4.7.1.1.4 |
atmxArpTimeToLiveThe address time to live.ro INTEGER .1.3.6.1.4.1.800.2.4.7.1.1.5 |
atmxArpTypeThe address type, statically or dynamically created.ro Enumeration .1.3.6.1.4.1.800.2.4.7.1.1.6 |
atmxLaneGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.4.8 |
atmLecConfigTableThis table contains all the configuration
parameters for a LAN Emulation client. SEQUENCE OF AtmLecConfigEntry .1.3.6.1.4.1.800.2.4.8.1 |
atmLecConfigEntryEach table entry contains configuration information
for one LAN Emulation Client.
Most of the objects are derived from Initial State
Parameters in the LAN Emulation specification. AtmLecConfigEntry .1.3.6.1.4.1.800.2.4.8.1.1 |
atmxLecConfigIndexIndex to identify an instance of this table.ro INTEGER .1.3.6.1.4.1.800.2.4.8.1.1.1 |
atmLecConfigLecsAtmAddressThe LAN Emulation Configuration Server which this client
can use if the Well Known LECS address is not used.rw XylanAtmLaneAddress .1.3.6.1.4.1.800.2.4.8.1.1.2 |
atmLecConfigUseDefaultLecsAddrThis is to specify if this client is to use the
Well Know LECS address or user supplied address.
This object alone with atmLecConfigLecsAtmAddress
is meaningless if the atmLecConfigMode is setted to
manual(2) mode.
1 = TRUE
2 = FALSErw INTEGER .1.3.6.1.4.1.800.2.4.8.1.1.3 |
atmLecRowStatusThis object lets network managers create and delete
an instance for this table.
1 = Create,
2 = Delete,
3 = Modify.rw INTEGER .1.3.6.1.4.1.800.2.4.8.1.1.4 |
atmLecRowInUseThis object returns a value to indicate if this
instance is used by an ATM service.
1 = In use
2 = Free.ro INTEGER .1.3.6.1.4.1.800.2.4.8.1.1.5 |
atmLecConfigModeIndicates whether this LAN Emulation Client should
auto-configure the next time it is (re)started.
In automatic(1) mode, a client uses a LAN Emulation
Configuration Server to learn the ATM address of its
LAN Emulation Server, and to obtain other parameters.
atmLecConfig{ LanType, MaxDataFrameSize, LanName } are
used in the Configure request.
atmLecConfigLesAtmAddress is ignored.
In manual(2) mode, management tells the client the
ATM address of its LAN Emulation Server and the
values of other parameters.
atmLecConfig{ LanType, MaxDataFrameSize, LanName } are
used in the Join request. atmLecConfigLesAtmAddress
tells the client which LES to call.rw Enumeration .1.3.6.1.4.1.800.2.4.8.1.1.6 |
atmLecConfigLanTypeC2 LAN Type.
The data frame format which this client will use the
next time it returns to the Initial State.
Auto-configuring clients use this parameter in their
Configure requests. Manually-configured clients use
it in their Join requests.
This MIB object will not be overwritten with the new
value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead,
atmLecActualLanType will be.rw LecDataFrameFormat .1.3.6.1.4.1.800.2.4.8.1.1.7 |
atmLecConfigMaxDataFrameSizeC3 Maximum Data Frame Size.
The maximum data frame size which this client will
use the next time it returns to the Initial State.
Auto-configuring clients use this parameter in their
Configure requests. Manually-configured clients use
it in their Join requests.
This MIB object will not be overwritten with the new
value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead,
atmLecActualMaxDataFrameSize will be.rw LecDataFrameSize .1.3.6.1.4.1.800.2.4.8.1.1.8 |
atmLecConfigLanNameC5 ELAN Name.
The ELAN Name this client will use the next time it
returns to the Initial State.
Auto-configuring clients use this parameter in their
Configure requests. Manually-configured clients use
it in their Join requests.
This MIB object will not be overwritten with the new
value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead,
atmLecActualLanName will be.rw DisplayString .1.3.6.1.4.1.800.2.4.8.1.1.9 |
atmLecConfigLesAtmAddressC9 LE Server ATM Address.
The LAN Emulation Server which this client will use
the next time it is started in manual configuration
mode.
When atmLecConfigMode is 'automatic', there is no need
to set this address, and no advantage to doing so.
The client will use the LECS to find a LES, putting
the auto-configured address in atmLecActualLesAtmAddress
while leaving atmLecConfigLesAtmAddress alone.rw XylanAtmLaneAddress .1.3.6.1.4.1.800.2.4.8.1.1.10 |
atmLecControlTimeoutC7 Control Time-out. Time out period used for
timing out most request/response control frame
interactions, as specified elsewhere [in the
LAN Emulation specification].
This time value is expressed in seconds.rw INTEGER ( 10..300 ) .1.3.6.1.4.1.800.2.4.8.1.1.11 |
atmLecMaxUnknownFrameCountC10 Maximum Unknown Frame Count. See the description
of atmLecMaxUnknownFrameTime below.rw INTEGER ( 0..10 ) .1.3.6.1.4.1.800.2.4.8.1.1.12 |
atmLecMaxUnknownFrameTimeC11 Maximum Unknown Frame Time. Within the period of
time defined by the Maximum Unknown Frame Time, a
LE Client will send no more than Maximum Unknown
Frame Count frames to the BUS for a given unicast
LAN Destination, and it must also initiate the
address resolution protocol to resolve that LAN
Destination.
This time value is expressed in seconds.rw INTEGER ( 1..60 ) .1.3.6.1.4.1.800.2.4.8.1.1.13 |
atmLecVccTimeoutPeriodC12 VCC Time-out Period. A LE Client SHOULD release
any Data Direct VCC that it has not used to
transmit or receive any data frames for the
length of the VCC Time-out Period. This parameter
is only meaningful for SVC Data Direct VCCs.
This time value is expressed in seconds. The default
value is 20 minutes. A value of 0 seconds means that
the timeout period is infinite. Negative values will
be rejected by the agent.rw INTEGER .1.3.6.1.4.1.800.2.4.8.1.1.14 |
atmLecMaxRetryCountC13 Maximum Retry Count. A LE CLient MUST not retry
a LE_ARP_REQUEST for a given frame's LAN
destination more than Maximum Retry Count times,
after the first LE_ARP_REQUEST for that same
frame's LAN destination.rw INTEGER( 0..2 ) .1.3.6.1.4.1.800.2.4.8.1.1.15 |
atmLecAgingTimeC17 Aging Time. The maximum time that a LE Client
will maintain an entry in its LE_ARP cache in
the absence of a verification of that
relationship.
This time value is expressed in seconds.rw INTEGER ( 10..300 ) .1.3.6.1.4.1.800.2.4.8.1.1.16 |
atmLecForwardDelayTimeC18 Forward Delay Time. The maximum time that a LE
Client will maintain an entry for a non-local MAC
address in its LE_ARP cache in the absence of a
verification of that relationship, as long as the
Topology Change flag C19 is true.
atmLecForwardDelayTime SHOULD BE less than atmLecAgingTime.
When it is not, atmLecAgingTime governs LE_ARP aging.
This time value is expressed in seconds.rw INTEGER ( 4..30 ) .1.3.6.1.4.1.800.2.4.8.1.1.17 |
atmLecExpectedArpResponseTimeC20 Expected LE_ARP Reponse Time. The maximum time
that the LEC expects an LE_ARP_REQUEST/
LE_ARP_RESPONSE cycle to take. Used for retries
and verifies.
This time value is expressed in seconds.rw INTEGER ( 1..30 ) .1.3.6.1.4.1.800.2.4.8.1.1.18 |
atmLecFlushTimeOutC21 Flush Time-out. Time limit to wait to receive a
LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has
been sent before taking recovery action.
This time value is expressed in seconds.rw INTEGER ( 1..4 ) .1.3.6.1.4.1.800.2.4.8.1.1.19 |
atmLecPathSwitchingDelayC22 Path Switching Delay. The time since sending a
frame to the BUS after which the LE Client may
assume that the frame has been either discarded
or delivered to the recipient. May be used to
bypass the Flush protocol.
This time value is expressed in seconds.rw INTEGER ( 1..8 ) .1.3.6.1.4.1.800.2.4.8.1.1.20 |
atmLecUseForwardDelayThis is specify whether to use Forward delay or arp cache
aging time
1 = No,
2 = Yes.rw INTEGER ( 1..2 ) .1.3.6.1.4.1.800.2.4.8.1.1.21 |
atmLecUseTranslationUse translation option or not.
If set to yes, user must set the
translation options by the swch
command in UI or the vportSwitchTable
to set the translation option other
than the default defined for LANE.
1 = no,
2 = yes.rw INTEGER ( 1..2 ) .1.3.6.1.4.1.800.2.4.8.1.1.23 |
atmLecSrBridgeNumSR bridge number for the LECrw INTEGER ( 1..15 ) .1.3.6.1.4.1.800.2.4.8.1.1.24 |
atmLecSrRingNumSR Ring number for the LECrw INTEGER ( 1..4095 ) .1.3.6.1.4.1.800.2.4.8.1.1.25 |
atmLecStatusTableA read-only table containing identification, status,
and operational information about the LAN Emulation
Clients this agent manages. SEQUENCE OF AtmLecStatusEntry .1.3.6.1.4.1.800.2.4.8.2 |
atmLecStatusEntryEach table entry contains information about one LAN
Emulation Client. AtmLecStatusEntry .1.3.6.1.4.1.800.2.4.8.2.1 |
atmxLecStatusSlotIndexSlot index to identify an instance of this table.ro INTEGER .1.3.6.1.4.1.800.2.4.8.2.1.1 |
atmxLecStatusPortIndexPort index to identify an instance of this table.ro INTEGER .1.3.6.1.4.1.800.2.4.8.2.1.2 |
atmxLecStatusServiceNumService number index to identify an instance of this
table.ro INTEGER .1.3.6.1.4.1.800.2.4.8.2.1.3 |
atmLecPrimaryAtmAddressC1 LE Client's ATM Addresses.
The primary ATM address of this LAN Emulation Client.
This address is used to establish the Control Direct
and Multicast Send VCCs, and may also be used to set
up Data Direct VCCs.
A client may have additional ATM addresses for use
with Data Direct VCCs. These addresses are readable
via the atmLecAtmAddressTable.ro XylanAtmLaneAddress .1.3.6.1.4.1.800.2.4.8.2.1.4 |
atmLecIDC14 LE Client Identifier. Each LE Client requires a
LE Client Identifier (LECID) assigned by the LE
Server during the Join phase. The LECID is placed
in control requests by the LE Client and MAY be
used for echo suppression on multicast data frames
sent by that LE Client. This value MUST NOT
change without terminating the LE Client and
returning to the Initial state. A valid LECID
MUST be in the range X'0001' through X'FEFF'.
The value of this object is only meaningful for a LEC
that is connected to a LES. For a LEC which does not
belong to an emulated LAN, the value of this object
is defined to be 0.ro INTEGER( 0..65279 ) .1.3.6.1.4.1.800.2.4.8.2.1.5 |
atmLecInterfaceStateThe mandatory state of the LAN Emulation Client.
Note that 'ifOperStatus' is defined to be 'up' when,
and only when, 'atmLecInterfaceState' is 'operational'.ro LecState .1.3.6.1.4.1.800.2.4.8.2.1.6 |
atmLecLastFailureRespCodeStatus code from the last failed Configure response
or Join response. Failed responses are those for
which the LE_CONFIGURE_RESPONSE / LE_JOIN_RESPONSE
frame contains a non-zero code, or fails to arrive
within a timeout period.
If none of this client's requests have failed, this
object has the value 'none'.
If the failed response contained a STATUS code that
is not defined in the LAN Emulation specification,
this object has the value 'undefinedError'.
The value 'timeout' is self-explanatory.
Other failure codes correspond to those defined in
the specification, although they may have different
numeric values.ro Enumeration .1.3.6.1.4.1.800.2.4.8.2.1.7 |
atmLecLastFailureStateThe state this client was in when it updated the
'atmLecLastFailureRespCode'.
If 'atmLecLastFailureRespCode' is 'none', this object
has the value initialState(1).ro LecState .1.3.6.1.4.1.800.2.4.8.2.1.8 |
atmLecProtocolThe LAN Emulation protocol which this client supports,
and specifies in its LE_JOIN_REQUESTs.ro INTEGER ( 1..255 ) .1.3.6.1.4.1.800.2.4.8.2.1.9 |
atmLecVersionThe LAN Emulation protocol version which this client
supports, and specifies in its LE_JOIN_REQUESTs.ro INTEGER ( 1..255 ) .1.3.6.1.4.1.800.2.4.8.2.1.10 |
atmLecTopologyChangeC19 Topology Change. Boolean indication that the LE
Client is using the Forward Delay Time C18,
instead of the Aging Time C17, to age non-local
entries in its LE_ARP cache C16.
For a client which is not connected to the LES, this
object is defined to have the value 'false'.ro INTEGER .1.3.6.1.4.1.800.2.4.8.2.1.11 |
atmLecConfigServerAtmAddressThe ATM address of the LAN Emulation Configuration
Server (if known) or the empty string (otherwise).ro XylanAtmLaneAddress .1.3.6.1.4.1.800.2.4.8.2.1.12 |
atmLecConfigSourceIndicates whether this LAN Emulation Client used the
LAN Emulation Configuration Server, and, if so, what
method it used to establish the Configuration Direct
VCC.ro Enumeration .1.3.6.1.4.1.800.2.4.8.2.1.13 |
atmLecActualLanTypeC2 LAN Type.
The data frame format that this LAN Emulation Client
is using right now. This may come from
* atmLecConfigLanType,
* the LAN Emulation Configuration Server, or
* the LAN Emulation Server
This value is related to 'ifMtu' and 'ifType'. See
the LEC management specification for more details.ro LecDataFrameFormat .1.3.6.1.4.1.800.2.4.8.2.1.14 |
atmLecActualMaxDataFrameSizeC3 Maximum Data Frame Size.
The maximum data frame size that this LAN Emulation
client is using right now. This may come from
* atmLecConfigMaxDataFrameSize,
* the LAN Emulation Configuration Server, or
* the LAN Emulation Serverro LecDataFrameSize .1.3.6.1.4.1.800.2.4.8.2.1.15 |
atmLecActualLanNameC5 ELAN Name.
The identity of the emulated LAN which this client
last joined, or wishes to join. This may come from
* atmLecConfigLanName,
* the LAN Emulation Configuration Server, or
* the LAN Emulation Serverro DisplayString .1.3.6.1.4.1.800.2.4.8.2.1.16 |
atmLecActualLesAtmAddressC9 LE Server ATM Address.
The LAN Emulation Server address currently in use or
most recently attempted.
If no LAN Emulation Server attachment has been tried,
this object's value is the zero-length string.ro XylanAtmLaneAddress .1.3.6.1.4.1.800.2.4.8.2.1.17 |
atmLecProxyClientC4 Proxy.
Indicates whether this client is acting as a proxy.
Proxy clients are allowed to represent unregistered
MAC addresses, and receive copies of LE_ARP_REQUEST
frames for such addresses.ro INTEGER .1.3.6.1.4.1.800.2.4.8.2.1.18 |
atmLecStatisticsTableAn extension table containing traffic statistics for
all the LAN Emulation Clients this host implements. SEQUENCE OF AtmLecStatisticsEntry .1.3.6.1.4.1.800.2.4.8.3 |
atmLecStatisticsEntryEach row in this table contains traffic statistics
for one LAN Emulation client. AtmLecStatisticsEntry .1.3.6.1.4.1.800.2.4.8.3.1 |
atmxLecStatsSlotIndexSlot index to identify an instance of this table.ro INTEGER .1.3.6.1.4.1.800.2.4.8.3.1.1 |
atmxLecStatsPortIndexPort index to identify an instance of this table.ro INTEGER .1.3.6.1.4.1.800.2.4.8.3.1.2 |
atmxLecStatsServiceNumService number index to identify an instance of this
table.ro INTEGER .1.3.6.1.4.1.800.2.4.8.3.1.3 |
atmLecArpRequestsOutThe number of LE_ARP_REQUESTs sent over the LUNI by
this LAN Emulation Client.ro Counter .1.3.6.1.4.1.800.2.4.8.3.1.4 |
atmLecArpRequestsInThe number of LE_ARP_REQUESTs received over the LUNI
by this LAN Emulation Client.
Requests may arrive on the Control Direct VCC or on
the Control Distribute VCC, depending upon how the
LES is implemented and the chances it has had for
learning. This counter covers both VCCs.ro Counter .1.3.6.1.4.1.800.2.4.8.3.1.5 |
atmLecArpRepliesOutThe number of LE_ARP_RESPONSEs sent over the LUNI by
this LAN Emulation Client.ro Counter .1.3.6.1.4.1.800.2.4.8.3.1.6 |
atmLecArpRepliesInThe number of LE_ARP_RESPONSEs received over the LUNI
by this LAN Emulation Client. This count includes
all such replies, whether solicited or not.
Replies may arrive on the Control Direct VCC or on
the Control Distribute VCC, depending upon how the
LES is implemented. This counter covers both VCCs.ro Counter .1.3.6.1.4.1.800.2.4.8.3.1.7 |
atmLecControlFramesOutThe total number of control packets sent by this
LAN Emulation Client over the LUNI.ro Counter .1.3.6.1.4.1.800.2.4.8.3.1.8 |
atmLecControlFramesInThe total number of control packets received by this
LAN Emulation Client over the LUNI.ro Counter .1.3.6.1.4.1.800.2.4.8.3.1.9 |
atmLecSvcFailuresThe total number of
* outgoing LAN Emulation SVCs which this client
tried, but failed, to open;
* incoming LAN Emulation SVCs which this client
tried, but failed to establish; and
* incoming LAN Emulation SVCs which this client
rejected for protocol or security reasons.ro Counter .1.3.6.1.4.1.800.2.4.8.3.1.10 |
atmLecServerVccTableA table identifying the Control and Multicast VCCs
for each LAN Emulation Client this host implements. SEQUENCE OF AtmLecServerVccEntry .1.3.6.1.4.1.800.2.4.8.4 |
atmLecServerVccEntryEach row in this table describes the Control VCCs
and Multicast VCCs for one LAN Emulation client. AtmLecServerVccEntry .1.3.6.1.4.1.800.2.4.8.4.1 |
atmxLecSlotIndexindex that uniquely identify an instance of
the atmLecServerVccTable.ro INTEGER .1.3.6.1.4.1.800.2.4.8.4.1.1 |
atmxLecPortIndexindex that uniquely identify an instance of
the atmLecServerVccTable.ro INTEGER .1.3.6.1.4.1.800.2.4.8.4.1.2 |
atmxLecServiceNumIndex that uniquely identify an instance of
the atmLecServerVccTable.ro INTEGER .1.3.6.1.4.1.800.2.4.8.4.1.3 |
atmLecConfigDirectVpiIf the Configuration Direct VCC exists, this object
contains the VPI which identifies that VCC at
the point where it connects to this LE client.
Otherwise, this object has the value 0.ro VpiInteger .1.3.6.1.4.1.800.2.4.8.4.1.4 |
atmLecConfigDirectVciIf the Configuration Direct VCC exists, this object
contains the VCI which identifies that VCC at
the point where it connects to this LE client.
Otherwise, this object has the value 0.ro VciInteger .1.3.6.1.4.1.800.2.4.8.4.1.5 |
atmLecControlDirectVpiIf the Control Direct VCC exists, this object
contains the VPI which identifies that VCC at
the point where it connects to this LE client.
Otherwise, this object has the value 0.ro VpiInteger .1.3.6.1.4.1.800.2.4.8.4.1.6 |
atmLecControlDirectVciIf the Control Direct VCC exists, this object
contains the VCI which identifies that VCC at
the point where it connects to this LE client.
Otherwise, this object has the value 0.ro VciInteger .1.3.6.1.4.1.800.2.4.8.4.1.7 |
atmLecControlDistributeVpiIf the Control Distribute VCC exists, this object
contains the VPI which identifies that VCC at the
point where it connects to this LE client.
Otherwise, this object has the value 0.ro VpiInteger .1.3.6.1.4.1.800.2.4.8.4.1.8 |
atmLecControlDistributeVciIf the Control Distribute VCC exists, this object
contains the VCI which identifies that VCC at the
point where it connects to this LE client.
Otherwise, this object contains the value 0.ro VciInteger .1.3.6.1.4.1.800.2.4.8.4.1.9 |
atmLecMulticastSendVpiIf the Multicast Send VCC exists, this object
contains the VPI which identifies that VCC at
the point where it connects to this LE client.
Otherwise, this object has the value 0.ro VpiInteger .1.3.6.1.4.1.800.2.4.8.4.1.10 |
atmLecMulticastSendVciIf the Multicast Send VCC exists, this object
contains the VCI which identifies that VCC at
the point where it connects to this LE client.
Otherwise, this object has the value 0.ro VciInteger .1.3.6.1.4.1.800.2.4.8.4.1.11 |
atmLecMulticastForwardVpiIf the Multicast Forward VCC exists, this object
contains the VPI which identifies that VCC at the
point where it connects to this LE client.
Otherwise, this object has the value 0.ro VpiInteger .1.3.6.1.4.1.800.2.4.8.4.1.12 |
atmLecMulticastForwardVciIf the Multicast Forward VCC exists, this object
contains the VCI which identifies that VCC at the
point where it connects to this LE client.
Otherwise, this object has the value 0.ro VciInteger .1.3.6.1.4.1.800.2.4.8.4.1.13 |
atmLeArpTableThis table provides access to an ATM LAN Emulation
Client's MAC-to-ATM ARP cache. It contains entries
for unicast addresses and for the broadcast address,
but not for multicast MAC addresses.
C16 LE_ARP Cache. A table of entries, each of which
establishes a relationship between a LAN
Destination external to the LE Client and the
ATM address to which data frames for that LAN
Destination will be sent. SEQUENCE OF AtmLeArpEntry .1.3.6.1.4.1.800.2.4.8.5 |
atmLeArpEntryAn ATM LAN Emulation ARP cache entry containing
information about the binding of one MAC address
to one ATM address. AtmLeArpEntry .1.3.6.1.4.1.800.2.4.8.5.1 |
atmxLeArpSlotIndexSlot index that uniquely identify an instance of
the LeArp Table.ro INTEGER .1.3.6.1.4.1.800.2.4.8.5.1.1 |
atmxLeArpPortIndexPort index that uniquely identify an instance of
the LeArp Table.ro INTEGER .1.3.6.1.4.1.800.2.4.8.5.1.2 |
atmxLeArpServiceNumService number index that uniquely identify an instance of
the LeArp Table.ro INTEGER .1.3.6.1.4.1.800.2.4.8.5.1.3 |
atmLeArpIndexIndex that uniquely identify an instance of
the LeArp Table.ro INTEGER .1.3.6.1.4.1.800.2.4.8.5.1.4 |
atmLeArpMacAddressThe MAC address for which this cache entry provides
a translation. Since ATM LAN Emulation uses an ARP
protocol to locate the Broadcast and Unknown Server,
the value of this object could be the broadcast MAC
address.
MAC addresses should be unique within any given ATM
Emulated LAN. However, there's no requirement that
they be unique across disjoint emulated LANs.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.800.2.4.8.5.1.5 |
atmLeArpAtmAddressThe ATM address of the Broadcast & Unknown Server
or LAN Emulation Client whose MAC address is stored
in 'atmLeArpMacAddress'.
This value may be determined through the use of the
LE_ARP procedure, through source address learning,
or through other mechanisms.
Some agents may provide write access to this object,
as part of their support for 'static' LE_ARP entries.
The effect of attempting to write an ATM address to
a 'learned' row is explicitly undefined. Agents may
disallow the write, accept the write and change the
row's type, or even accept the write as-is.ro XylanAtmLaneAddress .1.3.6.1.4.1.800.2.4.8.5.1.6 |
atmLeArpIsRemoteAddressIndicates whether this entry is for a local or remote
MAC address.
In this context, 'local' means 'a MAC address that is
local to the remote client', as opposed to 'one of my
addresses'.
true(1)
The address is believed to be remote - or its
local/remote status is unknown.
For an entry created via the LE_ARP mechanism,
this corresponds to the 'Remote address' flag
being set in the LE_ARP_RESPONSE.
During Topology Change periods, remote LE_ARP
entries generally age out faster than others.
Specifically, they are subject to the Forward
Delay Time as well as to the Aging Time.
false(2)
The address is believed to be local - that is
to say, registered with the LES by the client
whose ATM address is atmLeArpAtmAddress.
For an entry created via the LE_ARP mechanism,
this corresponds to the 'Remote address' flag
being cleared in the LE_ARP_RESPONSE.ro INTEGER .1.3.6.1.4.1.800.2.4.8.5.1.7 |
atmLeArpEntryTypeIndicates how this LE_ARP table entry was created and
whether it is aged.ro LeArpTableEntryType .1.3.6.1.4.1.800.2.4.8.5.1.8 |
atmLeArpVpiIndicates the vpi that this MAC is used to
for it Data Direct VCC.ro VpiInteger .1.3.6.1.4.1.800.2.4.8.5.1.9 |
atmLeArpVciIndicates the vci that this MAC is used to
for it Data Direct VCC.ro VciInteger .1.3.6.1.4.1.800.2.4.8.5.1.10 |
atmLeArpAgeIndicates the time in second that this entry
is being verified.ro INTEGER .1.3.6.1.4.1.800.2.4.8.5.1.11 |
atmLeArpTypeIndicates if this entry represents a SR RD
or a ESI.ro LeArpType .1.3.6.1.4.1.800.2.4.8.5.1.12 |
xylanLecConfigTableA supplementary table of the lecConfigTable in
ATM Forum MIB providing additional information
for creating and starting LEC service.
This table is indexed by the lecIndex. Each row
corresponding to the row with the same lecIndex
in the lecConfigTable. SEQUENCE OF XylanLecConfigEntry .1.3.6.1.4.1.800.2.4.8.6 |
xylanLecConfigEntryEach row contains a slot number, a port number,
a service number and a group number for the LEC
service. XylanLecConfigEntry .1.3.6.1.4.1.800.2.4.8.6.1 |
xylanLecSlotNumberThe slot on which the ASM/FCSM module is located.
The LEC service is to be created on that module.
When a row has just been created, the first slot
which has the ASM/FCSM module is assigned to this
instance. If this number is not changed. The
service will be created based on this assigned slot
number.rw INTEGER .1.3.6.1.4.1.800.2.4.8.6.1.1 |
xylanLecPortNumberThe port of the ASM/FCSM module on which The LEC
service is to be created. When a row has just
been created, the first available port of the ASM/FCSM
module is assigned to this instance. If this number
is not changed. The service will be created based on
this assigned port number.rw INTEGER .1.3.6.1.4.1.800.2.4.8.6.1.2 |
xylanLecServiceNumberThe service number which is assigned by the system.ro INTEGER .1.3.6.1.4.1.800.2.4.8.6.1.3 |
xylanLecGroupNumberThe group to which the LEC service belong. When a
row has just been created, the default group number
is assigned to this instance. If this number is not
changed. The service will be created based on this
assigned group number.rw INTEGER .1.3.6.1.4.1.800.2.4.8.6.1.4 |
atmxCIPstatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.4.9 |
atmCIPStatisticsTableAn extension table containing traffic statistics for
all the Classical IP this host implements. SEQUENCE OF AtmCIPStatisticsEntry .1.3.6.1.4.1.800.2.4.9.1 |
atmCIPStatisticsEntryEach row in this table contains traffic statistics
for one Classical IP Service. AtmCIPStatisticsEntry .1.3.6.1.4.1.800.2.4.9.1.1 |
atmxCIPSlotIndexSlot index to identify an instance of this table.ro INTEGER .1.3.6.1.4.1.800.2.4.9.1.1.1 |
atmxCIPPortIndexPort index to identify an instance of this table.ro INTEGER .1.3.6.1.4.1.800.2.4.9.1.1.2 |
atmxCIPServiceNumService number index to identify an instance of this
table.ro INTEGER .1.3.6.1.4.1.800.2.4.9.1.1.3 |
atmCIPpktsFromIPThe number of packets received form IP.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.4 |
atmCIPBroadcastPktFromIPThe number of Broadcast packets received form IP.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.5 |
atmCIPPktsFromIPDiscardThe number of packets received form IP discarded.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.6 |
atmCIPPktsToIPThe number of packets sent to IP.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.7 |
atmCIPPktsFromNetThe number of packets received from the Network.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.8 |
atmCIPPktsFromNetDiscardThe number of packets sent to IP discarded.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.9 |
atmCIPArpRespFromNetThe number of Arp response packet received form the
network.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.10 |
atmCIPArpReqFromNetThe number of Arp request packet received form the
network.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.11 |
atmCIPInvArpRespFromNetThe number of Inverse Arp response packet received
form the network.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.12 |
atmCIPInvArpReqFromNetThe number of Inverse Arp request packet received
form the network.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.13 |
atmCIPInvArpNakFromNetThe number of Inverse Arp negative acknowledgement
packet received form the network.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.14 |
atmCIPPktsToNetThe number of packets sent to the network.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.15 |
atmCIPPktsToNetDiscardThe number of packets sent to the network.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.16 |
atmCIPArpRespToNetThe number of Arp response packet sent to the
network.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.17 |
atmCIPArpReqToNetThe number of Arp request packet sent to the
network.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.18 |
atmCIPInvArpRespToNetThe number of Inverse Arp response packet sent to the
network.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.19 |
atmCIPInvArpReqToNetThe number of Inverse Arp request packet sent to the
network.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.20 |
atmCIPInvArpNakToNetThe number of Inverse Arp negative acknowledge
packet sent to the network.ro Counter .1.3.6.1.4.1.800.2.4.9.1.1.21 |
atmxSahiBWGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.4.11 |
atmxBwgTableA table of Bandwidth group parameters for Traffic Shaping SEQUENCE OF AtmxBwgEntry .1.3.6.1.4.1.800.2.4.11.1 |
atmxBwgEntryAn entry in the table, containing information about
the Traffic parameters for each of the 8 bandwidth groups AtmxBwgEntry .1.3.6.1.4.1.800.2.4.11.1.1 |
atmxBwgSlotIndexA unique value which identifies this hsm board slot.ro INTEGER .1.3.6.1.4.1.800.2.4.11.1.1.1 |
atmxBwgPortIndexA unique value which identifies this atm submodule port.ro INTEGER .1.3.6.1.4.1.800.2.4.11.1.1.2 |
atmxBwgNumA unique value that identifies the bwgro INTEGER .1.3.6.1.4.1.800.2.4.11.1.1.3 |
atmxBwgBEWhether to use Best Effort for tx data.rw Enumeration .1.3.6.1.4.1.800.2.4.11.1.1.4 |
atmxBwgPcrThe value of the Peak Cell Rate(Kbps) as defined in the Traffic
Management Specification Version 4.0.
atmxBwgPcr has no meaning when atmxBwgBE is equal to true.rw INTEGER .1.3.6.1.4.1.800.2.4.11.1.1.5 |
atmxBwgScrThe value of the Sustained Cell Rate(Kbps) as defined in the
Traffic Management Specification Version 4.0.
atmxBwgScr must be less or equal to atmxBwgPcr.
atmxBwgScr has no meaning when atmxBwgBE is equal to true.rw INTEGER .1.3.6.1.4.1.800.2.4.11.1.1.6 |
atmxBwgMbsThe value of the max burst size when interleaving traffic
from multiple sources as defined in the 4.0 Traffic Management specification.
atmxBwgMbs has no meaning when atmxBwgBE is equal to true.rw INTEGER .1.3.6.1.4.1.800.2.4.11.1.1.7 |
atmxBwgOperStatusIf the bwg is being used by any service we return inService(2)
, or we return outOfService(3).ro AtmOperStatCodes .1.3.6.1.4.1.800.2.4.11.1.1.8 |
atmxBwgServiceTableA table of Service group parameters for Traffic Shaping SEQUENCE OF AtmxBwgServiceEntry .1.3.6.1.4.1.800.2.4.11.2 |
atmxBwgServiceEntryEach entry represents an BandWidthGroup to Service mapping. AtmxBwgServiceEntry .1.3.6.1.4.1.800.2.4.11.2.1 |
atmxBwgServiceNumA unique value which identifies a service.ro INTEGER .1.3.6.1.4.1.800.2.4.11.2.1.1 |
atmx1483ScaleGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.4.12 |
atmGpToVcMappingTableAn extension table containing mapping info for all
group to VCI (and VPI) mapping for 1 Scaling service.
This table is for create, delete 1 mapping entry.
Utilize atmxServiceGroup to create or delete a
1483 Scaling Service. Create 1483 Scaling Service
only with 1 group and 1 vc thru the atmxServiceGroup.
Adding or removing other group-to-vc mapping should
then use this atmx1483ScaleGroup. SEQUENCE OF AtmGpToVcMappingEntry .1.3.6.1.4.1.800.2.4.12.1 |
atmGpToVcMappingEntryEach row in this table contains mapping info
for 1 group to 1 VCI (and 1 VPI) entry.
The value for VPI must be zero (0). AtmGpToVcMappingEntry .1.3.6.1.4.1.800.2.4.12.1.1 |
atmxGpToVcSlotIndexSlot index to identify an instance of this table.ro INTEGER .1.3.6.1.4.1.800.2.4.12.1.1.1 |
atmxGpToVcPortIndexPort index to identify an instance of this table.ro INTEGER .1.3.6.1.4.1.800.2.4.12.1.1.2 |
atmxGpToVcServiceNumService number index to identify an instance of this table.ro INTEGER .1.3.6.1.4.1.800.2.4.12.1.1.3 |
atmxGpToVcGroupIdGroup number index to identify an instance of this table.ro INTEGER .1.3.6.1.4.1.800.2.4.12.1.1.4 |
atmxGpToVcVpiThe VPI for 1 Scaling Service. VPI can only be zero .rw INTEGER .1.3.6.1.4.1.800.2.4.12.1.1.5 |
atmxGpToVcVciThe VCI for 1 Scaling Service. The range for VCI is
from 1 to 1000.rw INTEGER .1.3.6.1.4.1.800.2.4.12.1.1.6 |
atmxGpToVcRowStatusRow Status indicates the state of a entry of this
mapping table.
For a Get-operation, the value to be returned
values can be ACTIVE or INACTIVE. This RowStatus will
return ACTIVE, if the atmxServiceAdminStatus (an object
in atmxSerivceGroup) is set to ENABLE. RowStatus
will be INACTIVE if atmxServiceAdminStatus is set to a
value other than ENABLE.
RowStatus can only set to CREATE or DELETE. The values
ACTIVE and INACTIVE are read only.
For a Set-operation, values to be set can be CREATE
or DELETE.
Utilize atmxServiceGroup to create or delete a
1483 Scaling Service. Create 1483 Scaling Service
only with 1 group and 1 vc thru the atmxServiceGroup.
Adding or removing other group-to-vc mapping should
then use this atmx1483ScaleGroup.rw Enumeration .1.3.6.1.4.1.800.2.4.12.1.1.7 |
atmGpToVcBulkMappingTableAn extension table containing mapping (bulk) info for
all group to VCI (and VPI) mapping for 1 Scaling
service. This table can only have 1 row.
This table is for updating the whole mapping list
(ie. all mapping entries ) at one time. SEQUENCE OF AtmGpToVcBulkMappingEntry .1.3.6.1.4.1.800.2.4.12.2 |
atmGpToVcBulkMappingEntryThere is only 1 row in this table. This row contains all
group to VCI (and VPI) mapping for 1 Scaling service.
There are 3 indices for this table.
The value for VPI must be zero (0). AtmGpToVcBulkMappingEntry .1.3.6.1.4.1.800.2.4.12.2.1 |
atmxGpToVcBulkSlotIndexSlot index to identify a Scaling service.ro INTEGER .1.3.6.1.4.1.800.2.4.12.2.1.1 |
atmxGpToVcBulkPortIndexPort index to identify a Scaling service.ro INTEGER .1.3.6.1.4.1.800.2.4.12.2.1.2 |
atmxGpToVcBulkServiceNumService number index to identify a Scaling service.ro INTEGER .1.3.6.1.4.1.800.2.4.12.2.1.3 |
atmxGpToVcBulkNumOfNodesNumber of group to VCI (and VPI) mapping inside
the bulk mapping list.ro INTEGER .1.3.6.1.4.1.800.2.4.12.2.1.4 |
atmxGpToVcBulkMappingListA list containing all group to VCI (and VPI) mapping
entries. Each mapping entry has the following fields
having the exact order :
a) Group Number (4 bytes)
b) VPI (2 bytes)
c) VCI (2 bytes)
A total of 8 bytes for each mapping structure. There is
no separator in between matching structures, nor is a
end-of-string in this whole matching list. The size
of this whole mapping list must be a multiple of 8 bytes.
For Set-Operations, if a user wants to update the mapping
list, he must send the whole mapping list buffer.rw OCTET STRING .1.3.6.1.4.1.800.2.4.12.2.1.5 |
atmxLsmGroup OBJECT IDENTIFIER .1.3.6.1.4.1.800.2.4.13 |