X733GROUP-MIB
This MIB module implements X733 Alarms which are extracted from MML alarms (EWSD classic), from SNMP alarms (EWSD InterNode and other SNMP managed devices) and from Q3 alarms (EWSD PowerNode). According to this distinction, different traps for spontaneous alarms are defined. This MIB module is compatible to previous versions which did not support SNMP and Q3 alarms, and countAlarms with the number of major, critical and minor alarms of the relevant Network Element.
Main OID:
ewsdAlarms.1.3.6.1.4.1.231.7.1.3.1.1
73
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
73 total| Object Name |
|---|
sni OBJECT IDENTIFIER .1.3.6.1.4.1.231 |
siemensUnits OBJECT IDENTIFIER .1.3.6.1.4.1.231.7 |
oenProductMibs OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1 |
nms OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3 |
ncProxy OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.1 |
ewsdAlarmsThis MIB module implements X733 Alarms which are extracted from MML alarms (EWSD classic), from SNMP alarms (EWSD InterNode and other SNMP managed devices) and from Q3 alarms (EWSD PowerNode). According to this distinction, different traps for spontaneous alarms are defined. This MIB module is compatible to previous versions which did not support SNMP and Q3 alarms, and countAlarms with the number of major, critical and minor alarms of the relevant Network Element. MODULE-IDENTITY .1.3.6.1.4.1.231.7.1.3.1.1 |
commonGroup OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.1.1.1 |
neNamename of the EWSD DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.1.1 |
managedObjectClassnaming attribute of the class of alarm Object (only EWSD classic); possible values: DLU, SAL, MAL, LTG, SN, MB ... DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.1.2 |
notificationIdcorresponds to X.721/X.733:NotificationIdentifier - an ascii string uniquely identifying an alarm within all EWSDs. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.1.3 |
globalAlarmIdsan ascii string containing 0..64 commaseparated strings uniquely identifying an alarm within all EWSDs. OCTET STRING .1.3.6.1.4.1.231.7.1.3.1.1.1.4 |
controlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.1.1.2 |
setPerioddefines the time period for the periodical alarm summaries unit of measurement: 8 minutes, initially set to 1 (i.e. 8 minutes).rw INTEGER ( 0..60 ) .1.3.6.1.4.1.231.7.1.3.1.1.2.1 |
sendSummaryThe value must be a neName. Setting a value causes an immediate alarm status summary with respect to the chosen EWSD( forced alarm status summary). Possible EWSD names can be learned from the periodical status summary alarms.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.2.2 |
resendAlarmThe value must be a notificationID. Setting a value causes an immediate alarm notification. Possible notificationIDs can be learned from the status summary alarms.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.2.3 |
sendAllAlarmsWhenever this object is set to any (!) integer value all open Alarms will be sent.rw INTEGER .1.3.6.1.4.1.231.7.1.3.1.1.2.4 |
alarmSpontanSetting to no(2) disables sending of spontaneousAlarms, default: yes(1).rw Enumeration .1.3.6.1.4.1.231.7.1.3.1.1.2.5 |
countAlarmPerioddefines the time period for the periodic count alarms unit of measurement: 8 minutes; initially set to 0 (which means no periodic count alarms.rw INTEGER ( 0..60 ) .1.3.6.1.4.1.231.7.1.3.1.1.2.6 |
countAlarmSpontanSetting to yes(1) enables sending of spontaneous count alarms default: no(2).rw Enumeration .1.3.6.1.4.1.231.7.1.3.1.1.2.7 |
summaryGroup OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.1.1.3 |
numberOfAlarmsTotal number of open alarms of the relevant EWSD. Integer32 .1.3.6.1.4.1.231.7.1.3.1.1.3.1 |
connectionReliableThe connection to the relevant EWSD is reliable if the last information exchange with ADS is not longer than 8 minutes ago (valid for MML alarms). Enumeration .1.3.6.1.4.1.231.7.1.3.1.1.3.2 |
criticalTotal number of critical alarms of the relevant EWSD. Integer32 .1.3.6.1.4.1.231.7.1.3.1.1.3.3 |
majorTotal number of major alarms of the relevant EWSD. Integer32 .1.3.6.1.4.1.231.7.1.3.1.1.3.4 |
minorTotal number of minor alarms of the relevant EWSD. Integer32 .1.3.6.1.4.1.231.7.1.3.1.1.3.5 |
miscGroup OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.1.1.4 |
timePeriodactual value of time period for alarm summaries - unit of measurement: 8 minutes - initially set to 1 (i.e. 8 minutes) INTEGER ( 0..60 ) .1.3.6.1.4.1.231.7.1.3.1.1.4.3 |
q3AlarmNumbernumber of q3Alarm traps in which a Q3 alarm is divided (with CONTINUE_FLAG). Started from value 0, if it's not the last trap for this alarm value is incremented with 9000. A complete Q3 alarm consists of one q3Alarm trap, plus 'q3AlarmNumber' q3contAlarm traps. INTEGER ( 0..9999 ) .1.3.6.1.4.1.231.7.1.3.1.1.4.4 |
x733Group OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.1.1.5 |
eventTypelast component of the respective OID defined in X.721. Enumeration .1.3.6.1.4.1.231.7.1.3.1.1.5.1 |
severitycorresponds to X.721/X.733:PerceivedSeverity. Enumeration .1.3.6.1.4.1.231.7.1.3.1.1.5.2 |
probableCausecorresponds to X.721/X.733:ProbableCause. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.5.3 |
originalAlarmcorresponds to X.721/X.733:AdditionalText: The original EWSD alarm (max. 8 kByte) for EWSD classic, formatted output for SNMP traps and Q3 alarms OCTET STRING .1.3.6.1.4.1.231.7.1.3.1.1.5.4 |
processingStatusAn element of X.721:SpecificProblem Enumeration .1.3.6.1.4.1.231.7.1.3.1.1.5.5 |
alarmClassAn element of X.721:AdditionalInformation; can be seen as a CMIS-ManagedObjectClass-field if an object model with a finer granularity would be defined; example: SLM (subscriber line module) identifies a line card DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.5.6 |
managedObjectInstanceAn element of X.721:AdditionalInformation; can be seen as a part of the CMIS-ManagedObjectInstance-field if an object model with a finer granularity would be defined DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.5.7 |
rackAn element of X.721:AdditionalInformation INTEGER .1.3.6.1.4.1.231.7.1.3.1.1.5.8 |
shelfAn element of X.721:AdditionalInformation INTEGER .1.3.6.1.4.1.231.7.1.3.1.1.5.9 |
fromCardAn element of X.721:AdditionalInformation INTEGER .1.3.6.1.4.1.231.7.1.3.1.1.5.10 |
toCardAn element of X.721:AdditionalInformation; - same value as fromCard: a single card is affected by the alarm - otherweise cards from fromCard to toCard are affected INTEGER .1.3.6.1.4.1.231.7.1.3.1.1.5.11 |
fromPortAn element of X.721:AdditionalInformation INTEGER .1.3.6.1.4.1.231.7.1.3.1.1.5.12 |
toPortAn element of X.721:AdditionalInformation; - same value as fromPort: a single port is affected by the alarm - otherweise ports from fromPort to toPort are affected INTEGER .1.3.6.1.4.1.231.7.1.3.1.1.5.13 |
eventTimeAn element of X.710: Parameter contains the time of generation of the event, if event time is sent from network element, otherwise it is the time of reception of the alarm by NetM The EventTime is a GeneralizedTime (defined in X.208), format is YYYYMMDDhhmmss.f+hhmm where Y year M month in year D day in month h hour in day (0-23) m minute in hour s second in minute f tenth part of second +hhmm local time offset(+-) to UTC time. Time represents the local time (t1), and the time differential (t2) enables UTC time to be determined as follows: UTC time = t1 - t2 DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.5.14 |
ipAddressAn element of X.721:AdditionalInformation; indicates the source of the original SNMP trap. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.5.15 |
trapNameAn element of X.721:AdditionalInformation; the name/OID of the original SNMP trap. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.5.16 |
specificProblemscorresponds to X.733:SpecificProblems; further refinements to the ProbableCause; example: the value of 'slmiAlarmStateReason' for an 'slmiAlarmStateTrap'. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.5.17 |
additionalTextThis parameter allows the inclusion of a set of additional information in the event report. OCTET STRING .1.3.6.1.4.1.231.7.1.3.1.1.5.18 |
additionalInformationThis parameter allows the inclusion of a set of additional information in the event report. OCTET STRING .1.3.6.1.4.1.231.7.1.3.1.1.5.19 |
summaryAlarmsThis trap will be sent periodically or after an explicit request via SNMP set. It is useful for these reasons: - to notice that the connection to NetM is reliable - to notice that the connection from NetM to an EWSD is reliable - to learn the names of EWSDs under control of NetM - to notice that traps got lost. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.3.1.1.5.201 |
spontaneousAlarmsSpontaneous Alarm from EWSD classic (MML). This trap will notify management systems after notifications from the EWSD classic. This trap type will be sent also in case of a 'resend' request. Each spontaneous alarm contains the variable binding 'originalAlarm' representing the original EWSD alarm. This information can be very large ( about 8 Kbyte). NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.3.1.1.5.202 |
snmpAlarmSpontaneous Alarm from EWSD InterNode or other SNMP managed devices. This trap will notify management systems after an SNMP alarm trap has been received by NetM. This trap type will be sent also in case of a 'resend' request. Each snmpAlarm trap contains the formatted output of the original SNMP trap in 'originalAlarm'. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.3.1.1.5.203 |
q3AlarmSpontaneous Alarm from EWSD PowerNode. This trap will notify management systems after a Q3 alarm has been received from EWSD PowerNode. This trap type will be sent also in case of a 'resend' request. Each q3Alarm trap contains the formatted output of the original PowerNode trap in 'originalAlarm'. If the size of q3alarm exceeds 10KB, or one of the variables exceeds 8KB, 'q3alarm' is followed by 'q3contAlarm'. 'q3AlarmNumber' is 0 if the whole Q3 alarm is contained, or 9000 if it is continued with a 'q3contAlarm' sequence. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.3.1.1.5.204 |
q3contAlarmContinuation of a Q3 Alarm. If the size of the trap exceeds 10KB, or one of the variables exceeds 8KB, the next 'q3contAlarm' is generated. In 'q3AlarmNumber' there is the sequence number and a flag (9000) if it continues with a new 'q3contAlarm'. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.3.1.1.5.205 |
timeAckAlarmsA 'timeAckAlarms' trap is sent as acknowledgement for a 'setPeriod' set request. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.3.1.1.5.206 |
proxyStartUpA 'proxyStartUp' trap is sent if the proxy comes up. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.3.1.1.5.207 |
countAlarmSpontaneous or periodical trap, which contains the number of critical, major and minor alarms for a Network Element. Spontaneous: if the number of critical, major or minor alarms for a Network Element has changed. Periodical: depending on the setting of 'countAlarmPeriod'. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.3.1.1.5.208 |
osAlarmSpontaneous OS Alarm from NetManager. This trap will notify management systems after a OS alarm has been generated from the NetManager. This trap type will be sent also in case of a 'resend' request. NeName is filled up with OS Name. Notification ID has form: OS_<AlarmID> NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.3.1.1.5.209 |
q3Group OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.1.1.6 |
backupStatusThis parameter specifies whether or not the object emitting the alarm has been backed-up. Enumeration .1.3.6.1.4.1.231.7.1.3.1.1.6.1 |
backupObjectThis parameter specifies the managed object instance that is providing backup services for the managed object about which the notification pertains. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.6.2 |
trendIndicationThis parameter, when present, specifies the current severity trend of the managed object. Enumeration .1.3.6.1.4.1.231.7.1.3.1.1.6.3 |
thresholdInformationThis parameter shall be present when the alarm is a result of crossing a threshold. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.6.4 |
correlatedEventsan ascii string containing comma-separated notifications, considered to be correlated. OCTET STRING .1.3.6.1.4.1.231.7.1.3.1.1.6.5 |
stateChangesThis parameter is used to indicate a state transition associated with the alarm. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.6.6 |
monitoredAttributesan ascii string containing comma-separated List of Monitored Attributes( attribute:value ). OCTET STRING .1.3.6.1.4.1.231.7.1.3.1.1.6.7 |
securityAlarmDetectorThis attribute identifies the entity that detected the security alarm. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.6.8 |
serviceUserThis attribute contains information about the service user associated with the service request that caused the security alarm. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.6.9 |
serviceProviderThis attribute contains information about the service provider associated with the service request that caused the security alarm. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.6.10 |
listOfFaultyBoardsPowerNode equipment alarms contain a list of faulty boards. This information exactly defines the boards, which must be considered for repair/replacement. An ascii string containing comma-separated items. Each item contains: Module_name:LocationName:RackID:ShelfID:PitchID OCTET STRING .1.3.6.1.4.1.231.7.1.3.1.1.6.11 |
osGroup OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.3.1.1.7 |
mmnKeyThis identifies the Help Topic for the OS Alarm in the OS Alarm Help file. The format of the MMN key for the Basic Components: BASE_<Component Code>_<Alarm number> DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.3.1.1.7.1 |
thresholdValueThis attribute is relevant only for OS Threshold Alarms. - specifies the threshold value for any counter/monitored object, which is allowed and can be tolerated INTEGER .1.3.6.1.4.1.231.7.1.3.1.1.7.2 |
currentValueThis attribute is relevant only for OS Threshold Alarms. - specifies the current value for the measurements, which has violated th threhold value of monitored measurements INTEGER .1.3.6.1.4.1.231.7.1.3.1.1.7.3 |