XLDV20-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
893
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
893 total| Object Name |
|---|
xldv20 OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4 |
RFC1155-SMI Unknown .1.3.6.1.4.1.231.7.1.2.1.1.4 |
xldv20SnmpMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.1 |
xldv20SnmpControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1 |
xldv20SnmTmnTrapFlowControlTMN specific flag to suppress or not autonomous messages to TMN-OS.
Default is noTraps after reload or first time power up.rw Xldv20SuppressionType .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.1 |
xldv20SnmLctTrapFlowControlTMN specific flag to suppress or not autonomous messages to LCT.
Default is noTraps after reload or first time power up.rw Xldv20SuppressionType .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.2 |
xldv20SnmControlReqThe user command to start an update of
SNMP configuration file .rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.3 |
xldv20SnmControlStatusThe status of control request.
The start of an update of the configuration file will
only be started if the SnmControlStatus is not requestBusy.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.4 |
xldv20SnmLctConnectedIf a LCT is connected to the DSLAM the attribute will be set .rw Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.5 |
xldv20SnmTmnConnectedThe attribute is set by TMN-OS to indicate the receipt
of the trap 'startupEnd' .rw Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.6 |
xldv20SnmMaxResponseTimeTMN-OS maximum wait time in seconds for responses .ro Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.7 |
xldv20SnmTmnMaxNumberThe maximum number of TMNs which can be connected.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.8 |
xldv20SnmTmnSpecificIndexThe specific index of a TMN which can be connected.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.9 |
xldv20SnmCallpPollingFlagThe TMN can poll this global alarm flag to see whether for
any COH object an alarm is present.ro Xldv20PollingFlagType .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.10 |
xldv20SnmLctSessionPollingFlagThe TMN can poll this flag to see whether an LCT session
has been terminated within the last polling period (value set).
During the LCT session DSLAM configuration data may have been
changed and therefore the TMN database is inconsistent.
The TMN can perform a discovery to sychronize the data.
The TMN should set the value to notSet before the discovery.rw Xldv20PollingFlagType .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.11 |
xldv20SnmControlReqResultResult of the last user command.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.12 |
xldv20SnmStartupResultResult of the last startup .ro Xldv20StartupResult .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.13 |
xldv20SnmControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.1.1.14 |
xldv20TmnTableTable for TMN specific data.
Instances of this managed entity shall be automatically
SNMP configuration file has been read. SEQUENCE OF Xldv20TmnEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.1.2 |
xldv20TmnEntryAn entry in the xldv20TmnTable.
Notifications : none. Xldv20TmnEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.1.2.1 |
xldv20TmnIndexIndex of TmnTable.
Entries of the table with same index belong to the same TMN.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.1.2.1.1 |
xldv20TmnOrLctTerminalSpecifies a LCT or TMN terminal.ro Xldv20TerminalType .1.3.6.1.4.1.231.7.1.2.1.1.4.1.2.1.2 |
xldv20TmnInOrOutBandSpecifies whether communication is in or outband.ro Xldv20ChannelType .1.3.6.1.4.1.231.7.1.2.1.1.4.1.2.1.3 |
xldv20TmnConnectedThe attribute indicates whether this TMN/LCT is connected.ro Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.1.2.1.4 |
xldv20TmnTrapFlowControlTo suppress or not autonomous messages to TMN-OS.
Default : noTraps after reload or first time power up.ro Xldv20SuppressionType .1.3.6.1.4.1.231.7.1.2.1.1.4.1.2.1.5 |
xldv20TmnLctSessionPollingFlagTMN specific LCT session polling flag.ro Xldv20PollingFlagType .1.3.6.1.4.1.231.7.1.2.1.1.4.1.2.1.6 |
xldv20CallP OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.2 |
xldv20AtmCcControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1 |
xldv20ActOperationalStateUnused. Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.1 |
xldv20ActControlReqCOH (Connection Handling) user commands.
Notifications :
xldv20TrStateChangeOper.
xldv20TrActCcCreation.
xldv20TrActCcDeletion.
xldv20TrActCcReload .rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.2 |
xldv20ActControlStatusIndicates the status of a control request.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.3 |
xldv20ActVpiNniIdentifies the VPI value associated with
the Local Exchange.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.4 |
xldv20ActVpiUniThe VPI value associated with the Network Termination.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.5 |
xldv20ActVciNniThe VCI value associated with the Local Exchange.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.6 |
xldv20ActVciUniThe VCI value associated with the Network Termination.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.7 |
xldv20ActIfIndexThe relevant interface index of the connected PPTP .rw Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.8 |
xldv20ActPeakCellRateUpstreamThe upstream peak cell rate in bit/sec of the cross connect.
( Bit rate per ATM cell is 53*8 bit/sec ).rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.9 |
xldv20ActPeakCellRateDownstreamThe peak cell rate in downstream direction of the cross connect.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.10 |
xldv20ActCellDelayVariationToleranceUpstreamThe cell delay variation tolerance (in micro seconds)
in upstream direction of the cross connect.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.11 |
xldv20ActCellDelayVariationToleranceDownstreamThe cell delay variation tolerance (in micro seconds)
in downstream direction of the cross connect.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.12 |
xldv20ActTrafficTypeThe traffic type of the cross connect.
Supported traffic types are :
cbr : Constant bit rate.
ubr : Unspecified bit rate.
nrtVbr : Non real time variable bit rate.
rtVbr : Real time variable bit rate.rw Xldv20TrafficType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.13 |
xldv20ActTrafficDirectionThe traffic direction.rw Xldv20TrafficDirection .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.14 |
xldv20ActSustainableCellRateUpstreamThe upstream sustainable cell rate in bit/sec
for nrtVbr traffic.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.15 |
xldv20ActSustainableCellRateDownstreamThe downstream sustainable cell rate in bit/sec
for nrtVbr traffic.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.16 |
xldv20ActMaximumBurstSizeUpstreamThe upstream maximum burst size in cells
for nrtVbr traffic.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.17 |
xldv20ActMaximumBurstSizeDownstreamThe downstream maximum burst size in cells
for nrtVbr traffic.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.18 |
xldv20ActSegmentEndPointNniSpecifies whether the NNI VplTp/VclTp/VpcTp is
a segment endpoint (yes) or a connecting point (no)rw Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.19 |
xldv20ActSegmentEndPointUniSpecifies whether the UNI VplTp/VclTp/VpcTp is
a segment endpoint (yes) or a connecting point (no)rw Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.20 |
xldv20ActEthModeThe operational mode of the ethernet configuration:
Available modes: bridging, routing, currentCofiguration
(default) .
In version V20 the Ethernet configuration is performed
already when a NT is created.
The option currentConfiguration keeps the
current configuration data during cross connect creation.rw Xldv20EthNtMode .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.21 |
xldv20ActEthE164IspThe telephon number of the Internet Service Provider.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.22 |
xldv20ActEthIpAddressNtThe IP Address of the NT.rw IpAddress .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.23 |
xldv20ActEthIpAddressSubnetMaskNtThe subnet mask of the NT.rw IpAddress .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.24 |
xldv20ActEthIpAddressCoThe IP Address of the destination NT (office side).rw IpAddress .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.25 |
xldv20ActEthIpAddressSubnetMaskCoThe subnet mask of the CO.rw IpAddress .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.26 |
xldv20ActEthIpAddressRemoteRouterThe subnet mask of the ISP router.rw IpAddress .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.27 |
xldv20ActTestTypeNniThe type of continuity check on NNI side.
On F5 level (VC) segment only .rw Xldv20TestType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.28 |
xldv20ActContinuityCheckNniSpecifies whether or not the continuity check at NNI side
should be enabled for this instance of the
ATM Cross Connection managed entity .rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.29 |
xldv20ActEndpointTypeNniSpecifies whether the NNI termination point
VplTp/VclTp/VpcTp during countinuity check should be a
source or sink or both (bidirectional connection only).rw Xldv20EndpointType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.30 |
xldv20ActTestTypeUniThe type of continuity check on UNI side.
On F5 level (VC) only segment.rw Xldv20TestType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.31 |
xldv20ActContinuityCheckUniSpecifies whether or not the continuity check at UNI
should be enabled for this instance of
the ATM Cross Connection managed entity.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.32 |
xldv20ActEndpointTypeUniSpecifies whether the UNI termination point
VplTp/VclTp/VpcTp during countinuity check should be
source or sink or both (bidirectional connection only).rw Xldv20EndpointType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.33 |
xldv20ActControlReqResultThe result of the last user command.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.34 |
xldv20ActInbandVpiThe value of the configured inband Vpi.
The configured Vpi will be effective only after next reload.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.35 |
xldv20ActInbandVciThe value of the configured inband Vci.
The configured Vci will be effective only after next reload.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.36 |
xldv20ActCallpTableIndexAfter a successfull creation or deletion of a cross connect
COH provides the index of the created or deleted object.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.37 |
xldv20ActMaxVciValueConfigures the amount of VC's and their VCI values
which are created within a VpcTp.
Minimum VCI value is 32.
Maximum VCI value is 3500 (due to HW limits).rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.38 |
xldv20ActVbrCDVTUpstreamThe cell delay variation (in micro seconds)
for VBR traffic in upstream direction.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.39 |
xldv20ActVbrCDVTDownstreamThe cell delay variation (in micro seconds)
for VBR traffic in downstream direction.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.40 |
xldv20ActControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.41 |
xldv20ActSegmentEndPointNtSpecifies whether the VplTp/VpcTp at the
NT is a segment endpoint (yes) or a connecting point (no).rw Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.42 |
xldv20ActTestTypeNtThe type of continuity check at NT (segment or endToEnd) .rw Xldv20TestType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.43 |
xldv20ActContinuityCheckNtSpecifies whether or not the continuity check at NT
should be enabled .
NOTE : continuity check not supported at VccTp (F5 level) .rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.44 |
xldv20ActEndpointTypeNtSpecifies whether the endpoint VplTp/VpcTp at NT
should be a source or sink or both (bidirectional connection only)
for continuity check cells.rw Xldv20EndpointType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.45 |
xldv20ActCDVTAutoConfigIf yes is selected the policing parameter
CDVT (cell delay variation tolerance)
is determined automatically depending on
the configured cell rate.rw Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.2.1.46 |
xldv20AtmCrossConnectTableThe ATM VP cross connect table.
This managed entity is used to represent
the cross-connect relationship between two Vpl termination
points.
Instances of this managed entity shall be automatically
created and deleted during ATM Connect and ATM Disconnect
actions. SEQUENCE OF Xldv20AtmCrossConnectEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.2 |
xldv20AtmCrossConnectEntryAn entry in the ATM cross connect table. Xldv20AtmCrossConnectEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1 |
xldv20AccOperationalStateIdentifies whether or not this instance of
the ATM Cross Connection managed entity is capable of
performing its normal function ( i.e. switching cells ).
Altering this attribute is without reporting this state
change via the trap 'xldv20TrStateChangeOper'.ro Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.1 |
xldv20AccTerminationPointAThe instance of the VPL termination point within the DSLAM at the LE side.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.2 |
xldv20AccTerminationPointZThe instance of the VPL termination point within the DSLAM
at the NT side.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.3 |
xldv20AccLineIndexThe external line index. The TLM interfaces (see IFTable)
with same line index blong to the same line.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.4 |
xldv20AccEthVpcIndexFor cross connects at the LIETH a pointer to the
belonging VpcTp. The value is the entry number in the
xldv20VpcTpTable.
For all other cross connects the value is always 0.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.5 |
xldv20AccEthVccIndexFor cross connects at the LIETH a pointer to the
belonging VccTp. The value is the entry number in the
xldv20VccTpTable.
For all other cross connects the value is always 0.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.6 |
xldv20AccVpiNniIndexIndex of this table.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.7 |
xldv20AccAlarmStateIndicates whether for the cross connect
an alarm is present or not.ro Xldv20CallpAlarmState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.8 |
xldv20AccAdminStateThis attribute is used to activate (unlock) and deactivate
(lock) the VPL cross connection. The cross connect is
removed within the ATM ASIC, the configuration data of the
cross connect are still available within the DSLAM .rw Xldv20AdminState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.9 |
xldv20AccAtmfVplIndexFor cross connects at the ATMF port of NT this value
identifies the belonging VplTp . The value is the
entry number in the xldv20VplTpTable.
For all other cross connects the value is always 0.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.2.1.10 |
xldv20VplTpTableThis table contains the entries for Vpl termination
points (VplTp). SEQUENCE OF Xldv20VplTpEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3 |
xldv20VplTpEntryRepresent the VPL termination points on an ATM NE. Xldv20VplTpEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1 |
xldv20VplOperationalStateThis read-only attribute identifies whether or not the VPL
termination is capable of performing its normal functions
(in-service or out-of-service).ro Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.1 |
xldv20VplVpiValueThe VPI value associated with the VP link being terminated.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.2 |
xldv20VplHwUnitIndexThe HwUnitIndex of HWM sublayer:
LU for VplNNi or SU for VplUNI.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.3 |
xldv20VplIfIndexThe TLM interface index of the connected PPTP.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.4 |
xldv20VplPeakCellRateUpstreamThe upstream peak cell rate in bit/sec.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.5 |
xldv20VplPeakCellRateDownstreamThe downstream peak cell rate in bit/sec.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.6 |
xldv20VplCellDelayVariationToleranceUpstreamThe cell delay variation (in micro seconds).ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.7 |
xldv20VplCellDelayVariationToleranceDownstreamThe cell delay variation (in micro seconds).ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.8 |
xldv20VplTrafficTypeThe traffic type.ro Xldv20TrafficType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.9 |
xldv20VplTrafficDirectionThe traffic direction.ro Xldv20TrafficDirection .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.10 |
xldv20VplConnectivityPointerThis attribute serves as a pointer to the instance of the
VPL termination point managed entity instance (in the ATM
NE) it is cross connected to.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.11 |
xldv20VplLineIndexThis value identifies the belonging line.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.12 |
xldv20VplSegmentEndPointThis value specifies whether the VplTp is
a segment endpoint (yes) or a connecting point (no).ro Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.13 |
xldv20VplSustainableCellRateUpstreamThe sustainable upstream cell rate in bits/sec
for nrtVbr traffic.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.14 |
xldv20VplSustainableCellRateDownstreamThe sustainable downstream cell rate in bits/sec
for nrtVbr traffic.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.15 |
xldv20VplMaximumBurstSizeUpstreamThe maximum upstream burst size tolerance in cells
for nrtVbr traffic.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.16 |
xldv20VplMaximumBurstSizeDownstreamThe maximum downstream burst size tolerance in cells
for nrtVbr traffic.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.17 |
xldv20VplAlarmSeverityIndexIt is a pointer to the instance of the alarm severity
assignment profile managed entity that contains the severity
assignments for the alarms reported by this managed entity.rw Xldv20AlmSevProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.18 |
xldv20VplAlarmFilteringIndexIt is a pointer to the instance of the alarm filtering
assignment profile managed entity that contains the filtering
assignments for the alarms reported by this managed entity.
(Not implemented) Xldv20AlmFiltProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.19 |
xldv20VplCvpIndexSegmentThe index of of the related entry in the ContinuityCheckVpTable.
The entry is created when the COC is enabled (via command or
during cross connect creation).ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.20 |
xldv20VplIndexThe Index of this table.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.21 |
xldv20VplLOCAlarmIndicates an LOC alarm and its direction.ro Xldv20TpAlarmState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.22 |
xldv20VplVbrCDVTUpstreamThe cell delay variation (in micro seconds)
for VBR traffic in upstream direction of the VP cross connect.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.23 |
xldv20VplVbrCDVTDownstreamThe cell delay variation (in micro seconds)
for VBR traffic in downstream direction of the VP cross connect.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.3.1.24 |
xldv20VpcTpTableThis table contains the entries for VPC termination points. SEQUENCE OF Xldv20VpcTpEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4 |
xldv20VpcTpEntryEach entry represents the point in the switch
where the VPC and its associated overhead (F4 OAM cells) are
terminated or originated.
Instances of this managed entity may be created automatically
by the ATM NE when VP or VC cross connects are created at
at an Ethernet port. Or they are created by command.
Similarly instances of this managed entity may be deleted
automatically by the ATM NE or as a result of an ATM Cross
Connect release request.
Notifications :
xldv20TrRDI.
xldv20TrAIS alarms when fault is detected or cleared.
xldv20TrStateChangeOper. Xldv20VpcTpEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1 |
xldv20VpcOperationalStateThe operational state identifies whether or not the VpcTp
is capable of performing its normal functions.ro Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.1 |
xldv20VpcVpiValueIdentifies the VPI value associated with the
VP link being terminated.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.2 |
xldv20VpcHwUnitIndexThe unique identifier for hardware units,
here the HWM sublayer (LU* or or SU or LI*).ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.3 |
xldv20VpcIfIndexThe interface index of the connected PPTP.
For Vpc at LU the PPTP in the LU.
For Vpc at SU and LI the PPTP at the LI.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.4 |
xldv20VpcPeakCellRateUpstreamThe upstream peak cell rate
in bit/sec of the VP cross connect.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.5 |
xldv20VpcPeakCellRateDownstreamThe downstream peak cell rate
in bit/sec of the VP cross connect.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.6 |
xldv20VpcCellDelayVariationToleranceUpstreamThe upstream cell delay variation (in micro seconds)
of the VpcTp .ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.7 |
xldv20VpcCellDelayVariationToleranceDownstreamThe downstream cell delay variation (in micro seconds)
of the VpcTp.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.8 |
xldv20VpcTrafficTypeThe traffic type.ro Xldv20TrafficType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.9 |
xldv20VpcTrafficDirectionThe traffic direction.ro Xldv20TrafficDirection .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.10 |
xldv20VpcLineIndexThe belonging line.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.11 |
xldv20VpcSegmentEndPointThis value specifies whether the VpcTp is
a segment endpoint (yes) or a connecting point (no).ro Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.12 |
xldv20VpcSustainableCellRateUpstreamThe sustainable upstream cell rate in bits/sec
for nrtVbr traffic.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.13 |
xldv20VpcSustainableCellRateDownstreamThe sustainable downstream cell rate in cells/sec
for nrtVbr traffic.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.14 |
xldv20VpcMaximumBurstSizeUpstreamThe maximum upstream burst size tolerance in cells
for nrtVbr traffic.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.15 |
xldv20VpcMaximumBurstSizeDownstreamThe maximum downstream burst size tolerance in cells
for nrtVbr traffic.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.16 |
xldv20VpcAlarmSeverityIndexIt is a pointer to the instance of the alarm severity
assignment profile managed entity that contains the severity
assignments for the alarms reported by this managed entity.rw Xldv20AlmSevProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.17 |
xldv20VpcAlarmFilteringIndexIt is a pointer to the instance of the alarm filtering
assignment profile managed entity that contains the filtering
assignments for the alarms reported by this managed entity.
(Not implemented) Xldv20AlmFiltProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.18 |
xldv20VpcCvpIndexSegmentThe index of related entry in ContinuityCheckVpcTpTable
concerning an enabled continuity check on segment level.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.19 |
xldv20VpcCvpIndexEndToEndThe index of related entry in ContinuityCheckVpcTpTable
concerning a enabled endToEnd continuity check.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.20 |
xldv20VpcIndexThe Index of this table.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.21 |
xldv20VpcAISAlarmIndicates an AIS alarm and its direction.ro Xldv20TpAlarmState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.22 |
xldv20VpcRDIAlarmIndicates an RDI alarm and its direction.ro Xldv20TpAlarmState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.23 |
xldv20VpcLOCAlarmIndicates an LOC alarm and its direction.ro Xldv20TpAlarmState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.24 |
xldv20VpcNumberOfVcsThe number of VCs which are created within the VpcTp.
The range of VCI values : 32 plus this number - 1.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.25 |
xldv20VpcVbrCDVTUpstreamThe cell delay variation (in micro seconds)
for VBR traffic in upstream direction of the VpcTp.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.26 |
xldv20VpcVbrCDVTDownstreamThe cell delay variation (in micro seconds)
for VBR traffic in downstream direction of the VpcTp.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.27 |
xldv20VpcEmSpecificEM 45020 specific attribute.rw Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.28 |
xldv20VpcEthVpcIndexUsed to address the corresponding entry
in the VpcTpTable. Default is 0.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.29 |
xldv20VpcAtmfVplIndexUsed to address the corresponding entry
in the VplTpTable. Default is 0.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.4.1.30 |
xldv20VccTpTableVccTp table for VC termination points.
Entries are created for Ethernet NTs
when cross connects are created.
Entries are deleted with the cross connect. SEQUENCE OF Xldv20VccTpEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5 |
xldv20VccTpEntryEach entry represents the point in the switch
where the VCC and its associated overhead (F4 OAM cells) are
terminated or originated.
Instances of this managed entity may be created automatically
by the ATM NE or as a result of an Vpl and Vcl cross connect request
at an Ethernet port.
Similarly instances of this managed entity may be deleted
automatically by the ATM NE as a result of an cross
connect deletion request.
Notifications :
xldv20TrStateChangeOper.
xldv20TrObjCreate.
xldv20TrObjDelete.
xldv20TrRDI.
xldv20TrAIS.
xldv20TrLOC alarms when fault is detected or cleared. Xldv20VccTpEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1 |
xldv20VccOperationalStateThe operational state identifies whether or not the VPL
termination is capable of performing its normal functions
(in-service or out-of-service).ro Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.1 |
xldv20VccVciValueThis attribute identifies the VCI value associated with the
VC link being terminated.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.2 |
xldv20VccVpcIndexIndex of the related VpcTp.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.3 |
xldv20VccHwUnitIndexHwUnitIndex of the dependent PIU (LI).ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.4 |
xldv20VccAlarmSeverityIndexIt is a pointer to the instance of the alarm severity
assignment profile managed entity that contains the severity
assignments for the alarms reported by this managed entity.rw Xldv20AlmSevProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.5 |
xldv20VccAlarmFilteringIndexIt is a pointer to the instance of the alarm filtering
assignment profile managed entity that contains the filtering
assignments for the alarms reported by this managed entity.
(Not supported yet).ro Xldv20AlmFiltProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.6 |
xldv20VccLineIndexThis value identifies the belonging line .ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.7 |
xldv20VccIndexA unique value to identify an entry in the VCC TP table.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.8 |
xldv20VccAISAlarmIndicates an AIS alarm and its direction.ro Xldv20TpAlarmState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.9 |
xldv20VccRDIAlarmIndicates an RDI alarm and its direction.ro Xldv20TpAlarmState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.10 |
xldv20VccLOCAlarmIndicates an LOC alarm and its direction.ro Xldv20TpAlarmState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.11 |
xldv20VccCvcIndexSegmentThe index of the related entry in the xldv20ContinuityCheckVcTable
for an enabled continuity check on segment level.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.12 |
xldv20VccCvcIndexEndToEndThe index of the related entry in the xldv20ContinuityCheckVcTable
for an enabled endToEnd continuity check.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.5.1.13 |
xldv20VcCrossConnectTableThe VC cross connect table for Virtual Channel
point-to-point cross connections.
This managed entity is used to represent
the VC-cross-connect relationship between two termination
points.
Instances of this managed entity shall be automatically
created and deleted on VCX Connect and VCX Disconnect
actions . SEQUENCE OF Xldv20VcCrossConnectEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.6 |
xldv20VcCrossConnectEntryAn entry in the VC cross connect table.
Notifications : xldv20TrStateChangeOper. Xldv20VcCrossConnectEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1 |
xldv20VcxOperationalStateThe Operational State of Vc cross connect.ro Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.1 |
xldv20VcxTerminationPointAIdentifies the instance of the VCL termination point that represents
the VCL at the LE side.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.2 |
xldv20VcxTerminationPointZIdentifies the instance of the VCL termination point that represents
the VCL at the NT side.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.3 |
xldv20VcxLineIndexThe belonging line index.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.4 |
xldv20VcxEthVpcIndexUsed to address the corresponding entry
in the VpcTpTable. Default is 0.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.5 |
xldv20VcxEthVccIndexUsed to address the corresponding entry
in the VccTP Table. Default is 0.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.6 |
xldv20VcxVpcNniIndexUsed to address the corresponding entry at NNI
in the VpcTpTable. Default is 0.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.7 |
xldv20VcxVpcUniIndexUsed to address the corresponding entry at UNI
in the VpcTP Table. Default is 0.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.8 |
xldv20VcxIndexIndex of VcCrossConnectTable.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.9 |
xldv20VcxAlarmStateThis attribute indicates whether for the cross connect
an alarm is present or not.ro Xldv20CallpAlarmState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.10 |
xldv20VcxAdminStateThis attribute is used to activate (unlock) and deactivate
(lock) the VCL cross connection. The cross connect is
removed within the ATM ASIC, the configuration data of the
cross connect are still available within the DSLAM .rw Xldv20AdminState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.11 |
xldv20VcxAtmfVplIndexFor cross connects at the ATMF port of NT this value
identifies the belonging VplTp .
The value is the entry number in the xldv20VplTpTable.
For all other cross connects the value is always 0.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.6.1.12 |
xldv20VclTpTableThis table contains the entries for the VC links. SEQUENCE OF Xldv20VclTpEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7 |
xldv20VclTpEntryThe entries represent the termination of VCLs on an ATM NE.
An instance of the VC Cross Connection managed entity may be
used to relate two instances of the VCL Termination Point
managed entity (i.e. for point-to-point cross connection).
Instances of this managed entity may be created automatically
by the ATM NE or as a result of an VC cross connect request.
Similarly instances of this managed entity may be deleted
automatically by the ATM NE or as a result of an VC Cross
Connect release request.
Notifications: xldv20TrStateChangeOper. Xldv20VclTpEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1 |
xldv20VclOperationalStateThe operational state of VclTp.ro Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.1 |
xldv20VclVpiValueThe VPI value associated with the VC link being terminated.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.2 |
xldv20VclVciValueThe VCI value associated with the
VC link being terminated.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.3 |
xldv20VclHwUnitIndexThe HwUnitIndex of the dependent HW unit.
Here the HWM sublayer: the SU for VclUni or the LU for
VclNni .ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.4 |
xldv20VclIfIndexThe interface index of the connected PPTP.
It is the PPTP at the LU for VclUni.
The PPTP at the LI for VclNni.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.5 |
xldv20VclPeakCellRateUpstreamThe upstream peak cell rate
in bit/sec of the VC cross connect.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.6 |
xldv20VclPeakCellRateDownstreamThe downstream peak cell rate
in bit/sec of the VC cross connect.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.7 |
xldv20VclCellDelayVariationToleranceUpstreamThe upstream cell delay variation (in micro seconds)
of the VC cross connect.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.8 |
xldv20VclCellDelayVariationToleranceDownstreamThe downstream cell delay variation (in micro seconds)
of the VC cross connect.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.9 |
xldv20VclTrafficTypeThis attribute identifies the traffic type of the
VC cross connect.ro Xldv20TrafficType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.10 |
xldv20VclTrafficDirectionThe traffic direction.ro Xldv20TrafficDirection .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.11 |
xldv20VclConnectivityPointerA pointer to the instance of VclTp
it is cross connected to.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.12 |
xldv20VclLineIndexIdentifies the belonging line.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.13 |
xldv20VclSegmentEndPointSpecifies whether the VclTp is
a segment endpoint (yes) or a connecting point (no).ro Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.14 |
xldv20VclSustainableCellRateUpstreamThe sustainable upstream cell rate in bits/sec
for nrtVbr traffic.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.15 |
xldv20VclSustainableCellRateDownstreamThe sustainable downstream cell rate in bits/sec
for nrtVbr traffic.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.16 |
xldv20VclMaximumBurstSizeUpstreamThe maximum upstream burst size tolerance in cells
for nrtVbr traffic.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.17 |
xldv20VclMaximumBurstSizeDownstreamThe maximum downstream burst size tolerance in cells
for nrtVbr traffic.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.18 |
xldv20VclAlarmSeverityIndexIt is a pointer to the instance of the alarm severity
assignment profile managed entity that contains the severity
assignments for the alarms reported by this managed entity.rw Xldv20AlmSevProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.19 |
xldv20VclAlarmFilteringIndexIt is a pointer to the instance of the alarm filtering
assignment profile managed entity that contains the filtering
assignments for the alarms reported by this managed entity.
(Not implemented) Xldv20AlmFiltProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.20 |
xldv20VclCvcIndexSegmentThe index of iof the related entry in the
xldv20ContinuityCheckVclTpTable. The entry is created when
the continuity check is enabled on segment level.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.21 |
xldv20VclIndexIndex of this table.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.22 |
xldv20VclLOCAlarmIndicates an LOC alarm and its direction.ro Xldv20TpAlarmState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.23 |
xldv20VclVpcIndexA pointer to the belonging VpcTP in the VpcTp table.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.24 |
xldv20VclVbrCDVTUpstreamThe cell delay variation (in micro seconds)
for VBR traffic in upstream direction of the VclTp.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.25 |
xldv20VclVbrCDVTDownstreamThe cell delay variation (in micro seconds)
for VBR traffic in downstream direction of the VclTp.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.7.1.26 |
xldv20EthernetConfigTableThe Ethernet Configuration Table. SEQUENCE OF Xldv20EthernetConfigEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.10 |
xldv20EthernetConfigEntryThe entry of the Ethernet Configuration Table. Xldv20EthernetConfigEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1 |
xldv20EthModeThe operational mode of the ethernet configuration:
Available modes: bridging, routing.ro Xldv20EthNtMode .1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1.1 |
xldv20EthE164IspThe telephon number of the Internet Service Provider,
parameter for ipForwarding- modero OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1.2 |
xldv20EthIpAddressNtThe IP Address of the NT,
parameter for ipForwarding - mode.ro IpAddress .1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1.3 |
xldv20EthIpAddressSubnetMaskNtThe subnet mask of the NT ,
parameter for ipForwarding- mode.ro IpAddress .1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1.4 |
xldv20EthIpAddressCoThe IP Address of the destination NT (office side),
parameter for ipForwarding- mode.ro IpAddress .1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1.5 |
xldv20EthIpAddressSubnetMaskCoThe subnet mask of the CO ,
parameter for ipForwarding- mode.ro IpAddress .1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1.6 |
xldv20EthIpAddressRemoteRouterThe subnet mask of the ISP router ,
parameter for ipForwarding- mode.ro IpAddress .1.3.6.1.4.1.231.7.1.2.1.1.4.2.10.1.7 |
xldv20ContinuityCheckVpTableThe Continuity Check VP table.
Holds entries for enabled continuity checks at VP level.
Entries are created when Vpl cross connects
or VpcTps with enabled continuity check are created or
when continuity check is enabled via command.
Entries are deleted when the continuity check is disabled
(via xldv20ContinuityCheckControl) . SEQUENCE OF Xldv20ContinuityCheckVpEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.11 |
xldv20ContinuityCheckVpEntryThe entry represents the attributes of an enabled
continuity check at a VplTp or VpcTp.
Notifications : none. Xldv20ContinuityCheckVpEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.11.1 |
xldv20CvpIndexThe Index of this table.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.11.1.1 |
xldv20CvpEndpointTypeThe configured endpoint type (source or sink or
both) for countinuity check .ro Xldv20EndpointType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.11.1.2 |
xldv20CvpTestTypeThe configured type of continuity check (segment or endToEnd) .ro Xldv20TestType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.11.1.3 |
xldv20CvpOperationalStateIdentifies whether an enabled continuity check is
is working (value enabled) or not.ro Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.11.1.4 |
xldv20CvpVpTpIndexIndex of the related VplTp or VpcTp .ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.11.1.5 |
xldv20CvpObjectTypeSpecifies the type of related COH object
( VplTp or VpcTp ) .ro Xldv20RepSource .1.3.6.1.4.1.231.7.1.2.1.1.4.2.11.1.6 |
xldv20ContinuityCheckVcTableThe continuity check configuration table for
COC on VC level.
Entries in this table are created when Vcl cross connects with
enabled continuity check are created or
when the continuity check is enabled via command.
Entries are deleted when the continuity check is disabled
(via xldv20ContinuityCheckControl) . SEQUENCE OF Xldv20ContinuityCheckVcEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.12 |
xldv20ContinuityCheckVcEntryThe entry represents the attributes of an enabled
continuity check .
Notifications : none. Xldv20ContinuityCheckVcEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.2.12.1 |
xldv20CvcIndexIndex of table.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.12.1.1 |
xldv20CvcEndpointTypeThe configured endpoint type ( source or sink
or both) for countinuity check .ro Xldv20EndpointType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.12.1.2 |
xldv20CvcTestTypeThe type of continuity check segment or endToEnd .ro Xldv20TestType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.12.1.3 |
xldv20CvcOperationalStateThis read-only attribute identifies whether or not a
continuitycheck is enabled .ro Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.2.12.1.4 |
xldv20CvcVcTpIndexIndex of the related VC object (currently VclTp only) .ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.12.1.5 |
xldv20CvcObjectTypeSpecifies the type of related COH VC object ( VclTp ) .ro Xldv20RepSource .1.3.6.1.4.1.231.7.1.2.1.1.4.2.12.1.6 |
xldv20ContinuityCheckControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.13 |
xldv20CocControlReqControl group for activating/deactivating
the continuity check at the source/sink of
a VPL or VCL connection.
The user command attribute to activate a continuity check
(continuityCheckRequest) or to deactivate (noRequest).
Notifications : none .rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.1 |
xldv20CocControlStatusThe status of the control request. The value requestIdle will be
set after startup/recovery or after a running test was aborted by
the SNMP manager.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.2 |
xldv20CocEndpointTypeThis attribute specifies whether the source or sink of a
should be enabled/disabled for countinuity check .rw Xldv20EndpointType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.3 |
xldv20CocObjectTypeSelects the type of COH object.rw Xldv20RepSource .1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.4 |
xldv20CocTestTypeThe type of continuity check (segment or endToEnd) .rw Xldv20TestType .1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.5 |
xldv20CocIndexIf the continuity check should be enabled it is
the index of the selected COH object.
If the continuity check should be disabled it is
the index xldv20VplCvpIndexSegment or xldv20VpcCvpIndexSegment.
xldv20VpcCvpIndexEndToEnd or xldv20VclCvcIndexSegment.rw Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.6 |
xldv20CocControlReqResultThe result of the last user command.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.7 |
xldv20CocControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.2.13.8 |
xldv20InbandTmn OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.14 |
xldv20InbandVpiCurrentInband TMN configuration object.
Identifies the current VPI value of inband TMN channel.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.14.1 |
xldv20InbandVciCurrentIdentifies the current Vci value of inband TMN channel.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.14.2 |
xldv20InbandVpiConfigIdentifies the configured Vpi value of inband TMN channel
which becomes effective only after reload.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.14.3 |
xldv20InbandVciConfigIdentifies the configured Vci value of inband TMN channel
which becomes effective only after reload.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.2.14.4 |
xldv20Hwm OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.3 |
xldv20AtmNe OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.3.1 |
xldv20NeLocationDescribes the location of the NetElement, e.g. Hofmannstr. 51 .rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.1 |
xldv20NeVendorContains the vendor of the NetElement, Siemens AG .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.2 |
xldv20NeVersionContains the version of the NetElement, XLD V20ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.3 |
xldv20NeExternalTimeThe external Time of the NetElement in seconds from January 1st 1970.
The TMN-OS should set this time after firsttime power up, coldstart,
warmstart or reload and to refresh it once a day.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.4 |
xldv20NeTimeZoneSpecifies the time zone of the netelement
as time difference to Greenwich Mean Time (GMT),
e.g. GMT+1 or GMT-5.rw Xldv20TimeZone .1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.5 |
xldv20NeDescriptorFileNameThe name of the descriptor file. Initialized after
reload by SW upgrade .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.6 |
xldv20NeExternalTime45020The external Time of the NetElement in seconds.
The TMN-45020 sets this time after first time power up, coldstart,
warmstart or reload and refreshes the time in a
period of 24h . The basis is January 1st 1999, 0:00rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.7 |
xldv20NeSummerTimeSpecifies whether summer time (day light saving time DST)
or winter time is valid. Normally the clock is turned
1 hour ahead at begin of summer time and 1 hour back
at end. Default is winterTime.rw Xldv20DayLightSavingTime .1.3.6.1.4.1.231.7.1.2.1.1.4.3.1.8 |
xldv20HwUnitTableThe XLD hardware unit table. This table models the Equipment,
Equipment Holder and Plug-In Unit management entities . SEQUENCE OF Xldv20HwUnitEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.3.2 |
xldv20HwUnitEntryAn entry in the xldv20HwUnitTable.
Notifications : none. Xldv20HwUnitEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.3.2.1 |
xldv20HwUnitIndexA unique value to identify a hardware unit within
the ATM agent. It is used as index for the tables
xldv20HwEquipTable, xldv20HwEquipHolderTable and
xldv20HwPlugInUnitTable .ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.3.2.1.1 |
xldv20HwUnitTypeIdentifies the general type of this hardware unit.
The values are equipment, equipmentHolder and plugInUnit .ro Xldv20HwUnitType .1.3.6.1.4.1.231.7.1.2.1.1.4.3.2.1.2 |
xldv20HwContainmentTableThe hardware unit containment table. This table describes
the containment relationships that maintain between Equipment,
Equipment Holder and Plug-In Unit entities . SEQUENCE OF Xldv20HwContainmentEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.3.3 |
xldv20HwContainmentEntryAn entry in the hardware unit containment table. Each entry
of this type identifies two hardware units, one of which is
contained directly within the other .
Notifications : none. Xldv20HwContainmentEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.3.3.1 |
xldv20HwContainingUnitIndexThe HwUnitIndex (in the xldv20HwUnitTable), of the containing hardware
unit in this pair .ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.3.3.1.1 |
xldv20HwContainedUnitAddrA number uniquely identifying, within the containing hardware
unit, the contained unit.
Contained unit should be addressed starting at 1. If the
contained component is an Equipment Holder, this object
represents its physical location (e.g. slot number). If a
single piece of Equipment contains both Equipment Holder and
other Equipment objects, the Equipment Holders should have
the lowest-valued addresses, so this relationship can be
maintained. A Plug-In Unit always has an address of 1 .ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.3.3.1.2 |
xldv20HwContainedUnitIndexThe hwUnitIndex of the contained unit.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.3.3.1.3 |
xldv20HwEquipTableThe hardware equipment table. SEQUENCE OF Xldv20HwEquipEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.3.4 |
xldv20HwEquipEntryEntry of the HW equipment table.
The entries represent the various manageable physical
components of the ATM NE that are not modelled via the
Plug-In Unit managed entity.
An instance of this managed entity shall be automati-
cally created by the ATM NE immediately following the
initialization/installation of the externally
manageable physical component in the ATM NE.
Notifications :
xldv20TrObjCreate.
xldv20TrObjDelete . Xldv20HwEquipEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.3.4.1 |
xldv20EquTypeIndicates whether the equipment is a DSLAM,
ntAdsl, ntVdsl or a ntCpe ( customer premise equipment) .ro DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.3.4.1.1 |
xldv20EquLocationIdentifies the specific or general location of the
ATM NE component .rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.3.4.1.2 |
xldv20EquUserLabelAssignis user friendly name to the
associated managed entity .rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.3.4.1.3 |
xldv20EquConnectedPiuIndexThis attribute is used to show the PIU to which the NT is
connected (HwUnitIndex) . In case of DSLAM value is 0.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.3.4.1.4 |
xldv20EquConnectedPiuPortThe port ID of the connected PIU.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.3.4.1.5 |
xldv20HwEquipHolderTableThe equipment holder table . SEQUENCE OF Xldv20HwEquipHolderEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.3.5 |
xldv20HwEquipHolderEntryEntry of the equipment holder table.
The entries represent physical resources of the ATM NE
holding other physical resources. Examples of resources
represented by instances of this managed entity are
shelves and slots.
An instance of this managed entity shall exist for each
shelf and slot of the ATM NE. Instances shall be auto-
matically created and reported by the ATM NE once
system initialization is complete.
Notifications :
xldv20TrObjCreate .
xldv20TrObjDelete .
xldv20TrSwVersionSet when xldv20EqhSwVersion.
xldv20EqhMnemoCode,xldv20EqhFwItemNumber set. Xldv20HwEquipHolderEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1 |
xldv20EqhTypeType of the equipment holder.ro Xldv20EqhType .1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.1 |
xldv20EqhAccPiuTypesAccepted PIU Types of this slot.
This attribute identifies the types of Plug-In Units to be
supported by this slot. They are separated by newline
characters. That means 'CR LF'.
This attribute only supplies if the Equipment holder
instance represents a slot.ro DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.2 |
xldv20EqhSlotStatusIndicates whether a slot is empty or used.
This attribute only supplies if the Equipment holder
instance represents a slot.ro Xldv20SlotStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.3 |
xldv20EqhSwVersionIdentifies the software load of this PIU.
This attribute identifies the software load, if there
is any, which is currently designated as the one to
be loaded to the plug-in-unit whenever an automatic
reload of software is needed.
This attribute only applies if the equipment holder
instance represents a slot.
Default value for not loadable units is \0 .ro OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.4 |
xldv20EqhMnemoCodeThe mnemo code used to retrieve the SW
loadfile for the plug-in unit.
Default value for not loadable units is \0 .ro OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.5 |
xldv20EqhFwCodeThe FW code used to retrieve the SW
loadfile for the plug-in unit.
Default value for not loadable units is \0 .ro OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.6 |
xldv20EqhRiMnemoCodeThis attribute specifies the mnemo code of the currently plugged
PIU.ro DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.7 |
xldv20EqhRiFwItemNumberThis attribute specifies the FW item number of the currently
plugged PIU.ro DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.8 |
xldv20EqhRiFwIssueThis attribute specifies the FW item issue of the currently
plugged PIU.ro DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.9 |
xldv20EqhRiHwItemNumberThis attribute specifies the HW item number of the currently
plugged PIU.ro DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.10 |
xldv20EqhRiHwIssueThis attribute specifies the HW item issue of the currently
plugged PIU.ro DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.11 |
xldv20EqhRiSerialNumberThis attribute specifies the Serial Number of the currently
plugged PIU.ro DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.3.5.1.12 |
xldv20HwPlugInUnitTableTable containing the plug-in unit entries . SEQUENCE OF Xldv20HwPlugInUnitEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.3.6 |
xldv20HwPlugInUnitEntryEntry of plug in unit table.
Each entry is used to represent equipment that is inserted
(plugged into) and removed from slots of the ATM NE .
Notifications :
xldv20TrStateChangeOper.
xldv20TrStateChangeAdmin.
xldv20TrTrObjCreate.
xldv20TrObjDelete.
Alarm traps when a fault has been detected or cleared. Xldv20HwPlugInUnitEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1 |
xldv20PiuAdminStateThis attribute is used to activate (unlock) and deactivate
(lock) the functions performed by the plug-in unit.
Default is locked except for LU155:OM, LU155:OL, LUPON:O,
LUDSX3:C. For LU155:OM, LU155:OL, LUPON:O, LUDSX3:C locking
is only allowed from LCT.
In the transition from lock to unlock the Plug-In Unit is
diagnosed.rw Xldv20AdminState .1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1.1 |
xldv20PiuAvailStatusThe availability status of a plug-in unit is described with
this attribute.ro Xldv20AvailStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1.2 |
xldv20PiuOperStateThe operational state of plug in unit.ro Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1.3 |
xldv20PiuTypeIdentifier for the type of a plug-in unit.
See description of xldv20EqhAccPiuTypes for possible string values.ro DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1.4 |
xldv20PiuAlarmSeverityIndexIt is a pointer to the instance of the alarm severity
assignment profile managed entity that contains the severity
assignments for the alarms reported by this managed entity.
Default is 1.rw Xldv20AlmSevProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1.5 |
xldv20PiuAlarmFilteringIndexIt is a pointer to the instance of the alarm filtering
assignment profile managed entity that contains the filtering
assignments for the alarms reported by this managed entity.
(Not implemented yet) .ro Xldv20AlmFiltProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1.6 |
xldv20PiuUpgradeResultInforms about the status of the SW upgrade task during
loading and the result at the end of loading the current plug-in unit.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.3.6.1.7 |
xldv20HwuControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.3.7 |
xldv20HwuControlReqThis attribute identifies the control command for creating or
deleting a HW unit.
Notifications : xldv20TrHwuControl when command is finished.rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.1 |
xldv20HwuControlStatusThe status of a control request.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.2 |
xldv20HwuUnitTypeIdentifies the type of hardware unit which should be created.
The values are equipment, equipmentHolder and plugInUnit .
The following entities can not be created:
atmNe.
equipment (DSLAM).
equipmentHolder (basic shelf).
equipmentHolder (slot1-slot32 of basic shelf).rw Xldv20HwUnitType .1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.3 |
xldv20HwuEquTypeIndicates the equipment which should be created
(ntAdsl or ntVdsl or ntCpe). Default is \0.ro OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.4 |
xldv20HwuEqhTypeIndicates the equipmentHolder which should be created (extendedShelf or
ntAdslShelf or ntVdslShelf) .ro Xldv20EqhType .1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.5 |
xldv20HwuPiuTypeIdentifies the type of a plug-in unit which should be created.
The following entities cannot be created or deleted : LU*, and CI .
Default is \0.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.6 |
xldv20HwuContainingUnitIndexIdentifies the managed entity which contains the created unit .rw Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.7 |
xldv20HwuContainedUnitAddrIdentifies the index of the contained unit, which should be created,
within the containing unit .rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.8 |
xldv20HwuUnitIndexIdentifies the HW Unit which should be deleted .rw Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.9 |
xldv20HwuControlTimerThe maximum wait time for the manager when a create
or delete HW unit request cannot be executed
immediately ( value commExecStarted in GetResponse
for xldv20HwuControlReq ).ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.10 |
xldv20HwuControlReqResultThe result of the last user command.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.11 |
xldv20HwuControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.3.7.12 |
xldv20RemoteInventory OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.3.9 |
xldv20RiControlReqFeature not supported.
This attribute identifies the control commands to get
information about the boards currently plugged into the
XLD system. On a request from TMN-OS or LCT, the
Product Identification Data (PID) and location data
(rack, row, slot) of either a single board or of
all boards plugged are collected. These data are sent to
to a file at the FTP server.
Notifications : xldv20TrRemInvReady when the remote inventory data
have been collected and the resulting file has been sent to the
FTP server.rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.3.9.1 |
xldv20RiControlStatusThe status of a control request.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.3.9.2 |
xldv20RiControlTimerThe maximum wait time for the manager when remote
inventory data retrieve request cannot be executed
immediately (value commExecStarted in the result attribute
xldv20RiControlReqResult).
The manager reads this value from the DSLAM.
The end of request indicates the trap xldv20TrRemInvReady .ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.3.9.3 |
xldv20RiResultFilePathThe destination path where the file containing
the remote inventory data should be stored on the
FTP server. If this attribute does not contain a valid path
name no remote inventory data will be transmitted .rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.3.9.4 |
xldv20RiHwUnitIndexThe HwUnitIndex of the requested board.
if remote inventory data for a single board are requested.rw Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.3.9.5 |
xldv20RiControlReqResultThe result of the last user command.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.3.9.6 |
xldv20RiControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.3.9.7 |
xldv20HwUnitMappingTableThe table maps hardware units ('HwUnitIndex') to
TLM interfaces ('IfIndex') accociated to this hardware. SEQUENCE OF Xldv20HwUnitMappingEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.3.10 |
xldv20HwUnitMappingEntryAn entry of the xldv20HwUnitMappingTable. Xldv20HwUnitMappingEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.3.10.1 |
xldv20HwmHwUnitIndexThe 'HwUnitIndex' of the selected hardware unit.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.3.10.1.1 |
xldv20HwmIfIndexThe 'IfIndex' of a TLM interface
on the selected hardware unit.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.3.10.1.2 |
xldv20Tlm OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.4 |
xldv20IfTableThe TLM interface table. SEQUENCE OF Xldv20IfEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.1 |
xldv20IfEntryAn entry in the TLM interface table. Each entry represents
either a physical path termination point (PPTP) or a
TC adaptor (tcAdaptor).
Notifications :
alarm traps when a fault has been detected or cleared.
xldv20TrStateChangeOper.
xldv20TrStateChangeAdmin. Xldv20IfEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1 |
xldv20IfIndexIndex of the table. Identifier of a TLM interface .ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.1 |
xldv20IfTypeThe type of a TLM interface.
Supported interface types :
s1n, s1f.
adc, adr.
ibm, eth.
s3n, s3f.
d3n, d3f.
e3n, e3f.
e1nIma, e1fIma.
d1nIma, d1fIma.
sdc, sdr.
atmIma (IMA group).
tca.
In XLDV20 unused :
pon.
vdc.
vdr.
d1nIma.
d1fIma.ro Xldv20IfType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.2 |
xldv20IfLineIndexA unique value to identify interfaces belonging to the
same line.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.3 |
xldv20IfHwUnitIndexThe index to identify the hardware unit the physical
path/TC layer terminates on.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.4 |
xldv20IfHwPortIdFor PPTP it is the associated HW port ID. For TC adaptor
it is the IfIndex of the PPTP the TC adaptor is connected to.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.5 |
xldv20IfConnectivityIndexFor PPTP it is the associated HW port ID. For TC adaptor
it is the IfIndex of the PPTP the TC adaptor is connected to.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.6 |
xldv20IfOperStateThe operational state of this unit.ro Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.7 |
xldv20IfAdminStateActivates(unlock) or deactivates(lock) the functionality
of this managed entity. It must be locked before physical
looptest has been started. The attribute is not
configurable during looptest.
The PPTP of type s1f, s3f, e3f, d3f, e1nIma, e1fIma,
d1nIma, d1fIma and atmIma
and the associated tcAdaptors can only be locked from a
connected LCT.rw Xldv20AdminState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.8 |
xldv20IfAlarmStateThe nature of an alarm at a TLM interface.
Values correspond to alarm trap ID`s.
Default is noAlarm.ro Xldv20AlarmState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.9 |
xldv20IfAlarmSeverityIndexThe index of the associated entry in the alarm severity
profile table. These entries contain the severity
assigments for the alarms reported by this managed
entity.
The range of values is:
1,.., 10: for possible pre-configured alarm severity
profiles .
Default is profile 1.rw Xldv20AlmSevProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.10 |
xldv20IfAlarmFilteringIndexIt is a pointer to the instance of the alarm filtering
assignment profile managed entity that contains the filtering
assignments for the alarms reported by this managed entity.ro Xldv20AlmFiltProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.4.1.1.11 |
xldv20AdcControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2 |
xldv20AdcCtrlControlReqADSL control request object to activate a configured set of
data (command: activateData), which includes minimum and maximum
bandwidth in upstream and downstream direction, latency and
margin.rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.1 |
xldv20AdcCtrlControlStatusThe status of a control request.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.2 |
xldv20AdcCtrlIfIndexIt is the relevant interface index of the ADSL central PPTP.rw Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.3 |
xldv20AdcCtrlMinRateDnDesired lower limit of downstream data rate. The data rate
ranges from 32 to 8096 Kbit/sec and is splitted into units of 32 Kbit/sec.
This corresponds to a cell rate between 75 and 19094 cells/sec.
Default is 1 (32 kbps/75 cps).rw Xldv20AdslDataRateDown .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.4 |
xldv20AdcCtrlMinRateUpDesired lower limit of upstream data rate. The data rate
ranges from 32 to 768 Kbit/sec and is splitted into units of 32 Kbit/sec.
This corresponds to a cell rate between 75 and 1811 cells/sec.
Default is 1 (32 kbps/75 cps).rw Xldv20AdslDataRateUp .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.5 |
xldv20AdcCtrlMaxRateDnDesired upper limit of downstream data rate. The data
rate ranges from 32 and 8096 Kbit/sec and
is splitted into units of 32 Kbit/sec.
This corresponds to a cell rate between 75 and 19094 cells/sec.
Default is 253 (8096 kbps/19094 cps).rw Xldv20AdslDataRateDown .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.6 |
xldv20AdcCtrlMaxRateUpDesired upper limit of upstream data rate. The data rate ranges
from 32 and 768 Kbit/sec and is splitted into units of 32 Kbit/sec.
This corresponds to a cell rate between 75 and 1811 cells/sec.
Default is 24 (768 kbps/1811 cps).rw Xldv20AdslDataRateUp .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.7 |
xldv20AdcCtrlMarginDnDesired downstream margin in units of dB.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.8 |
xldv20AdcCtrlMarginUpDesired upstream margin in units of dB .rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.9 |
xldv20AdcCtrlLatencyDnSelects fast mode or interleaved mode downstream.
0 = interleavedLow (default).
1 = interleavedHigh .
256 = fast mode.rw Xldv20Latency .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.10 |
xldv20AdcCtrlLatencyUpSelects fast mode or interleaved mode upstream.
0 = interleavedLow (default).
1 = interleavedHigh .
256 = fast mode.rw Xldv20Latency .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.11 |
xldv20AdcCtrlMinMarginDnThreshold for downstream margin when an alarm
should be sent. In units of dB.
The value auto is the default value and means that
the threshold is calculated from the configured margin :
threshold margin down = configured margin down - 6 dB.rw Xldv20AdslMinMargin .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.12 |
xldv20AdcCtrlMinMarginUpThreshold for upstream margin when an alarm
should be sent. In units of dB.
The value auto is the default value and means that
the threshold is calculated from the configured margin :
threshold margin up = configured margin up - 6 dB.rw Xldv20AdslMinMargin .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.13 |
xldv20AdcCtrlControlReqResultThe result of the last user command.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.14 |
xldv20AdcCtrlXdslServiceTypeThe service mode for the DSL line according to ITU norm.
Supported modes are :
- gDotHsMode (handshake mode) for automatic link up either to ADSL equipment .
or to UDSL equipment (G9941).
- or ansiT1Dot413 for ADSL equipment (fullRateMode, ITU G9921).
- or gDotLiteMode for UDSL equipment (uawgMode, ITU G9922).
- or gDotAll to allow any NT/CPE service type (is determined by the
central modem) .rw Xldv20XdslServiceType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.15 |
xldv20AdcCtrlControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.16 |
xldv20AdcCtrlTrainingModeSelects between different training modes for ADSL modems.rw Xldv20AdcTrainingMode .1.3.6.1.4.1.231.7.1.2.1.1.4.4.2.17 |
xldv20VdcControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3 |
xldv20VdcCtrlControlReqFeature not supported.
This attribute marks the command to activate a configured set of
(command: activateData), which includes minimum and maximum
bandwidth in upstream and downstream direction, latency and some
additional modem parameters (power boost, warmstart, VDSL mode,
Sleep mode, PSD mask, power adaptation). Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.1 |
xldv20VdcCtrlControlStatusThis attribute indicates the status of a control request.
requestIdle,
requestBusy,
requestPassed,
requestFailed . Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.2 |
xldv20VdcCtrlIfIndexIt is the relevant interface index of the VDSL-C PPTP. Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.3 |
xldv20VdcCtrlMinRateDnThe desired lower limit of the downstream data rate.rw Xldv20VdcRateDn .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.4 |
xldv20VdcCtrlMinRateUpThe desired lower limit of the upstream data rate. Xldv20VdcRateUp .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.5 |
xldv20VdcCtrlMaxRateDnThe upper limit of the downstream data rate. Xldv20VdcRateDn .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.6 |
xldv20VdcCtrlMaxRateUpThe upper limit of the upstream data rate. Xldv20VdcRateUp .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.7 |
xldv20VdcCtrlLatencyDnSelects interleave depth (i.e. latency time) used for
error correction in downstream direction. Xldv20VdcLatencyDn .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.8 |
xldv20VdcCtrlLatencyUpSelects interleave depth (i.e. latency time) used for
error correction in upstream direction. Xldv20VdcLatencyUp .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.9 |
xldv20VdcCtrlPowerBoostConfigured power boost mode. Xldv20VdcPowerBoostAdaptationType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.10 |
xldv20VdcCtrlWarmStartConfigured warmstart option. Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.11 |
xldv20VdcCtrlVdslModeConfigured VDSL mode option. Xldv20VdcVdslMode .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.12 |
xldv20VdcCtrlSleepModeConfigured sleep mode option. Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.13 |
xldv20VdcCtrlPsdMaskConfigured PSD mask option (electro-magnetic interference
effects, M1 for strong and M2 for weak effects). Xldv20VdcPsdMask .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.14 |
xldv20VdcCtrlPowerAdaptationConfigured power adaptation option. Xldv20VdcPowerBoostAdaptationType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.15 |
xldv20VdcCtrlControlReqResultThis read-only attribute informs about the result of
the last user command. Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.16 |
xldv20VdcCtrlControlTimeStampThis read-only attribute informs about the time stamp
of the last command (end of command). TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.17 |
xldv20AdcPPTPTableThe physical path termination point table for ADSL Central
interface. SEQUENCE OF Xldv20AdcPPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4 |
xldv20AdcPPTPEntryAn entry describing a termination point in the PPTP table.
Notifications : see xldv20IfEntry. Xldv20AdcPPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1 |
xldv20AdcMinRateDnCfgThe desired lower value of the downstream data rate. The data
rate ranges from 32 to 8096 Kbit/sec and
is splitted into units of 32 Kbit/sec.
This corresponds to a cell rate between 75 and 19094 cells/sec.
Default is 1 (32 kbps/75 cps).ro Xldv20AdslDataRateDown .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.1 |
xldv20AdcMinRateUpCfgThe desired lower value of the upstream data rate. The data
rate ranges from 32 and 768 Kbit/sec and
is splitted into units of 32 Kbit/sec.
This corresponds to a cell rate between 75 and 1811 cells/sec.
Default is 1 (32 kbps/75 cps).ro Xldv20AdslDataRateUp .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.2 |
xldv20AdcMaxRateDnCfgThe desired upper value of the downstream data rate. The data
rate ranges from 32 and 8160 Kbit/sec and is splitted into units
of 32 Kbit/sec.
This corresponds to a cell rate between 75 and 1811 cells/sec.
Default is 253 (8096 kbps/19094 cps).ro Xldv20AdslDataRateDown .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.3 |
xldv20AdcMaxRateUpCfgThe desired upper value of the upstream data rate. The data
rate ranges from 32 and 768 Kbit/sec and
is splitted into units of 32 Kbit/sec.
This corresponds to a cell rate between 75 and 1811 cells/sec.
Default is 24 (768 kbps/1811 cps).ro Xldv20AdslDataRateUp .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.4 |
xldv20AdcMarginDnCfgDesired downstream margin. The unit of measurement
is dB.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.5 |
xldv20AdcMarginUpCfgDesired upstream margin. The unit of measurement
is dB.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.6 |
xldv20AdcMinMarginDnCfgDesired threshold for downstream margin in units of dB.
If the value auto is selected during configuration
the threshold is calculated from the configured margin :
threshold margin down = configured margin down - 6 dB.ro Xldv20AdslMinMargin .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.7 |
xldv20AdcMinMarginUpCfgDesired threshold for upstream margin in units of dB.
If the value auto is selected during configuration
the threshold is calculated from the configured margin :
threshold margin up = configured margin up - 6 dB.ro Xldv20AdslMinMargin .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.8 |
xldv20AdcLatencyDnCfgThe configured fast mode or interleaved mode downstream.
0 = interleavedLow (default).
1 = interleavedHigh .
256 = fast mode.ro Xldv20Latency .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.10 |
xldv20AdcLatencyUpCfgThe configured fast mode or interleaved mode upstream.
0 = interleavedLow (default).
1 = interleavedHigh .
256 = fast mode.ro Xldv20Latency .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.11 |
xldv20AdcRateDnThe current downstream data rate. The data rate
ranges from 32 and 8096 Kbit/sec and is splitted into units
of 32 Kbit/sec. This corresponds to a cell rate between
75 and 19094 cells/sec. Default is rateInvalid (32767).ro Xldv20AdslDataRateDownCurrent .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.12 |
xldv20AdcRateUpThe current upstream data rate. The data rate
ranges from 32 and 768 kbit/sec and is splitted into units
of 32 Kbit/sec. This corresponds to a cell rate between
75 and 1811 cells/sec. Default is rateInvalid (32767).ro Xldv20AdslDataRateUpCurrent .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.13 |
xldv20AdcMarginDnThe current downstream margin in units of dB.
Default is marginInvalid.ro Xldv20AdslMargin .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.14 |
xldv20AdcMarginUpThe current upstream margin in units of dB.
Default is marginInvalid.ro Xldv20AdslMargin .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.15 |
xldv20AdcAttenuationDnThe current downstream attenuation in steps of 0,5 dB.
Default is attenuationInvalid .ro Xldv20AdslAttenuation .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.16 |
xldv20AdcAttenuationUpThe current upstream attenuation in steps of 0,5 dB.
Default is attenuationInvalid .ro Xldv20AdslAttenuation .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.17 |
xldv20AdcLinkStateThe attribute reflects upon the internal states of the
Central Office Modem.ro Xldv20LinkState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.18 |
xldv20AdcAISOnLOSEnables or disables the VP-AIS generation
after defect LOS.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.19 |
xldv20AdcAISOnACTEnables or disables the VP-AIS generation
after link activation fault.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.20 |
xldv20AdcGuaranteedBandwidthUsageGaranteed bandwidth in percent.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.21 |
xldv20AdcXdslServiceTypeCfgThe configured service mode for XDSL line.ro Xldv20XdslServiceType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.22 |
xldv20AdcInitStatusThe initialization status field of an ADSL line.
Describes the initalization error in case of
an activation problem on an ADSL line .ro Xldv20XdslInitStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.23 |
xldv20AdcTransceiverOutputPowerThe ADSL tranceiver output power. Granularity 1.0 dBm.
Default value is outputPowerInvalid.ro Xldv20AdslOutputPower .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.24 |
xldv20AdcFirstUsedSubCarrierUpstreamThe first used sub carrier in upstream direction.
Default value is 64 (unknown).ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.25 |
xldv20AdcFirstUsedSubCarrierDownstreamThe first used sub carrier in downstream direction.
Default value is 256 (unknown).ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.26 |
xldv20AdcLastUsedSubCarrierUpstreamThe last used sub carrier in upstream direction.
Default value is 64 (unknown).ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.27 |
xldv20AdcLastUsedSubCarrierDownstreamThe last used sub carrier in downstream direction.
Default value is 256 (unknown).ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.28 |
xldv20AdcXdslServiceTypeThe current service type resulting from the configured service
type. It depends on the actual hardware.
Configuring gDotHsMode can result either in gDotLiteMode or gDotDmtMode.
gDotAll can result in gDotDmtMode, ansiT1dot413 or gDotLiteMode.
Default value is serviceTypeUnknown (10).ro Xldv20XdslServiceTypeCurrent .1.3.6.1.4.1.231.7.1.2.1.1.4.4.4.1.29 |
xldv20VdcPPTPTableFeature not supported.
The physical path termination point table for VDSL C. SEQUENCE OF Xldv20VdcPPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5 |
xldv20VdcPPTPEntryAn entry describing a termination point in the PPTP table.
Notifications : see xldv20IfEntry. Xldv20VdcPPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1 |
xldv20VdcMinRateDnCfgThe lower limit of the downstream data rate. Xldv20VdcRateDn .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.1 |
xldv20VdcMinRateUpCfgThe lower limit of the upstream data rate. Xldv20VdcRateUp .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.2 |
xldv20VdcMaxRateDnCfgThe upper limit of the downstream data rate. Xldv20VdcRateDn .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.3 |
xldv20VdcMaxRateUpCfgThe upper limit of the upstream data rate. Xldv20VdcRateUp .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.4 |
xldv20VdcLatencyDnCfgDesired interleave depth (i.e. latency time) used for
error correction in downstream direction. Xldv20VdcLatencyDn .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.5 |
xldv20VdcLatencyUpCfgDesired interleave depth (i.e. latency time) used for
error correction in upstream direction. Xldv20VdcLatencyUp .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.6 |
xldv20VdcPowerBoostCfgDesired power boost mode. Xldv20VdcPowerBoostAdaptationType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.7 |
xldv20VdcWarmStartCfgConfigured warmstart option. Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.8 |
xldv20VdcVdslModeCfgConfigured VDSL mode option. Xldv20VdcVdslMode .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.9 |
xldv20VdcSleepModeCfgDesired sleep mode option. Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.10 |
xldv20VdcPsdMaskCfgDesired PSD mask option (electro-magnetic interference
effects, M1 for strong and M2 for weak effects). Xldv20VdcPsdMask .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.11 |
xldv20VdcPowerAdaptationCfgDesired power adaptation option. Xldv20VdcPowerBoostAdaptationType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.12 |
xldv20VdcRateDnThe current downstream data rate. Xldv20VdcRateDn .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.13 |
xldv20VdcRateUpThe current upstream data rate. Xldv20VdcRateUp .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.14 |
xldv20VdcMarginDnThe current downstream margin in units of dB. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.15 |
xldv20VdcMarginUpThe current upstream margin in units of dB. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.16 |
xldv20VdcAttenuationDnThe current downstream attenuation in units of dB. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.17 |
xldv20VdcAttenuationUpThe current upstream attenuation in units of dB. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.18 |
xldv20VdcLinkStateCurrent internal states of the Central Office VDSL Modem. Xldv20LinkState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.19 |
xldv20VdcGuaranteedBandwidthUsageused bandwidth in percent. INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.5.1.20 |
xldv20IbmPPTPTableThe physical path termination point table for the IBM IF. SEQUENCE OF Xldv20IbmPPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.6 |
xldv20IbmPPTPEntryAn entry describing a termination point in the IbmPPTP table.
Notifications : see xldv20IfEntry. Xldv20IbmPPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.6.1 |
xldv20IbmAISOnLOSTo enable/disable (default) the VP-AIS generation on defect LOS.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.6.1.1 |
xldv20IbmVpAISFilteringTo enable or disable (default) the VP-AIS cell filtering function
in the NT. In case of enable no VP-AIS cells are passed
to the subscriber.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.6.1.2 |
xldv20Ds3NePPTPTableThe near end physical path termination point table
for the DS3 interface. SEQUENCE OF Xldv20Ds3NePPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.7 |
xldv20Ds3NePPTPEntryAn entry describing a termination point in the PPTP table.
Notifications : see xldv20IfEntry. Xldv20Ds3NePPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.7.1 |
xldv20D3nTypeThe interface type of the line used for transmission.ro Xldv20LineType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.7.1.1 |
xldv20D3nCodingTypeThe coding type of the line used for transmission.
Value: dsx3B3ZS .ro Xldv20CodingType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.7.1.2 |
xldv20D3nPayloadScramblingActivateEnables (default) / disables the payload scrambling .rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.7.1.3 |
xldv20D3nEmptyCellTypeThe type of empty cells.rw Xldv20EmptyCellType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.7.1.4 |
xldv20D3nBandwidthUsageUsed bandwidth in percent.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.7.1.5 |
xldv20E3NePPTPTableThe physical path termination point table for the E3 IF. SEQUENCE OF Xldv20E3NePPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.8 |
xldv20E3NePPTPEntryAn entry describing a termination point in the PPTP table.
Notifications : see xldv20IfEntry. Xldv20E3NePPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1 |
xldv20E3nTypeThe interface type of the line used for transmission.ro Xldv20LineType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.1 |
xldv20E3nCodingTypeThe coding type of the line used for transmission.ro Xldv20CodingType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.2 |
xldv20E3nTrailTraceSendThe pattern to be sent to LE for the trail
trace send functionality.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.3 |
xldv20E3nTrailTraceSendDefaultTo configure the trail trace send functionality.
A default trace value (enabled) or the pattern
defined in the xldv20E3nTrailTraceSend attribute (disabled) will
be sent.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.4 |
xldv20E3nTrailTraceExpectThe expected pattern.
It will be compared with the value of the
E3nTrailTraceReceive attribute provided that the attribute
E3nTrailTraceTIMDetection is enabled.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.5 |
xldv20E3nTrailTraceTIMDetectionActivateEnables / disables (default) signal comparison of the signals
E3nTrailTraceExpect and E3nTrailTraceReceive.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.6 |
xldv20E3nTrailTraceReceiveThe received trail trace value from the LE.ro OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.7 |
xldv20E3nEmptyCellTypeType of empty cells.rw Xldv20EmptyCellType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.8 |
xldv20E3nPayloadTypeThe received payload type.ro Xldv20E3nPayloadType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.9 |
xldv20E3nBandwidthUsageUsed bandwidth in percent.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.8.1.10 |
xldv20Stm1NePPTPTableThe physical path termination point table for the STM1 IF. SEQUENCE OF Xldv20Stm1NePPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9 |
xldv20Stm1NePPTPEntryAn entry describing a termination point in the PPTP table.
Notifications : see xldv20IfEntry. Xldv20Stm1NePPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1 |
xldv20S1nLineTypeThe physical medium of the line used for transmission.ro Xldv20LineType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.1 |
xldv20S1nPathTraceSendPattern to be sent to the LE (CRC + 15 bytes) used for the path
trace send functionality.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.2 |
xldv20S1nPathTraceSendDefaultTo configure the path trace send functionality.
A default path trace value (enabled) or the pattern
defined in the xldv20S1nPathTraceSend attribute (disabled) will
be sent.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.3 |
xldv20S1nPathTraceExpectThe expected result of a path trace operation.
This signal will be compared with the
S1nPathTraceReceive, when the Attribute
S1nPathTraceTIMDetectionActivate is enabled. If the comparison
detects unequality an alarm notification (TIM) is sent.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.4 |
xldv20S1nPathTraceTIMDetectionActivateEnables / disables (default) the comparison of xldv20S1nPathTraceExpect
and xldv20S1nPathTraceReceive attribute.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.5 |
xldv20S1nPathTraceReceiveReceived path trace value from the LE.ro OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.6 |
xldv20S1nHpEberThresholdThe threshold for the higher-order path excessive bit error check.rw Xldv20S1nS3nEberThreshold .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.7 |
xldv20S1nMsEberThresholdThe threshold for the multiplexer section excessive bit error check.rw Xldv20S1nS3nEberThreshold .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.8 |
xldv20S1nRsEberThresholdThe threshold for the repeater section excessive bit error check.rw Xldv20S1nS3nEberThreshold .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.9 |
xldv20S1nSDThresholdThe threshold for the signal degration check.rw Xldv20S1nS3nSDThreshold .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.10 |
xldv20S1nRDIAISOnEberEnables (default) / disables the RDI-and VP-AIS generation
on defect excessive bit ratio.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.11 |
xldv20S1nSignalLabelReceiveReceived signal label from the LE.ro Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.12 |
xldv20S1nEmptyCellTypeThe type of empty cells.rw Xldv20EmptyCellType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.13 |
xldv20S1nBandwidthUsageUsed bandwidth in percent.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.9.1.14 |
xldv20Sts3NePPTPTableThe physical path termination point table for the STS3c IF. SEQUENCE OF Xldv20Sts3NePPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10 |
xldv20Sts3NePPTPEntryAn entry describing a termination point in the PPTP table.
Notifications : see xldv20IfEntry. Xldv20Sts3NePPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1 |
xldv20S3nLineTypeThe physical medium of the line used for transmission.ro Xldv20LineType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.1 |
xldv20S3nPathTraceSendThe input signal used for the path trace send functionality.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.2 |
xldv20S3nPathTraceSendDefaultEnables/disables the path trace send functionality.
A default path trace value (enabled) or the pattern
defined in the xldv20S3nPathTraceSend attribute (disabled) will
be sent.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.3 |
xldv20S3nPathTraceExpectThe expected result of a path trace operation.
This signal will be compared with the
S3nPathTraceReceive, when the attribute
S3nPathTraceTIMDetectionActivate is enabled. If the comparison detects
unequality an alarm notification (TIM) is sent. When CRC is
activated, only the first 15 bytes are compared.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.4 |
xldv20S3nPathTraceTIMDetectionActivateEnables/disables the comparsion of the signals
S3nPathTraceExpect and S3nPathTraceReceive.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.5 |
xldv20S3nPathTraceReceiveReceived path trace value from the LE.ro OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.6 |
xldv20S3nPathTraceSyncEnables/disables the path trace synchronization
(the sync-bit generation for the path trace send attribute).rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.7 |
xldv20S3nPathTraceSendCRCActivateEnables/disbales the CRC generation
for the path trace send attribute.
First Trace Send byte ignored and used for CRC when CRC is enabled.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.8 |
xldv20S3nPathTraceReceiveCRCActivateEnables/disables the CRC generation
for the path trace reveive attribute.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.9 |
xldv20S3nHpEberThresholdThreshold for the higher-order path
excessive bit error check.rw Xldv20S1nS3nEberThreshold .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.10 |
xldv20S3nMsEberThresholdThreshold for the multiplexer
section excessive bit error check.rw Xldv20S1nS3nEberThreshold .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.11 |
xldv20S3nRsEberThresholdThreshold for the repeater section
excessive bit error check.rw Xldv20S1nS3nEberThreshold .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.12 |
xldv20S3nSDThresholdThreshold for the signal degration check.rw Xldv20S1nS3nSDThreshold .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.13 |
xldv20S3nSignalLabelReceiveReceived signal label value from the LE.ro Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.14 |
xldv20S3nEmptyCellTypeType of empty cells.rw Xldv20EmptyCellType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.15 |
xldv20S3nBandwidthUsageUsed bandwidth in percent.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.10.1.16 |
xldv20Dsx1ConfigTableThe DS1 Configuration table. SEQUENCE OF Xldv20Dsx1ConfigEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.11 |
xldv20Dsx1ConfigEntryAn entry in the DS1 Configuration table (RFC1406) .
Index is IfIndex of dsx1nePPTP (e1nIma). Xldv20Dsx1ConfigEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1 |
xldv20Dsx1LineTypeThis variable indicates the variety of DS1
Line implementing this circuit. The type of
circuit affects the number of bits per second
that the circuit can reasonably carry, as well
as the interpretation of the usage and error
statistics. The values, in sequence.
dsx1ESF Extended SuperFrame DS1.
dsx1D4 AT&T D4 format DS1.
dsx1E1 CCITT Recommendation G704
(Table 4a).
dsx1E1-CRC CCITT Recommendation G704
(Table 4b).
dsxE1-MF G704 (Table 4a) with TS16
multiframing enabled.
dsx1E1-CRC-MF G704 (Table 4b) with TS16.
multiframing enabled.ro Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.1 |
xldv20Dsx1LineCodingThis variable describes the variety of Zero
Code Suppression used on the link, which in
turn affects a number of its characteristics.
dsx1JBZS refers the Jammed Bit Zero Suppres-
sion, in which the AT&T specification of at
least one pulse every 8 bit periods is literal-
ly implemented by forcing a pulse in bit 8 of
each channel. Thus, only seven bits per chan-
nel, or 1.344 Mbps, is available for data.
dsx1B8ZS refers to the use of a specified pat-
tern of normal bits and bipolar violations
which are used to replace a sequence of eight
zero bits.
ANSI Clear Channels may use dsx1ZBTSI, or Zero
Byte Time Slot Interchange.
E1 links, with or without CRC, use dsx1HDB3 or
dsx1AMI.
dsx1AMI refers to a mode wherein no zero code
suppression is present and the line encoding
does not solve the problem directly. In this
application, the higher layer must provide data
which meets or exceeds the pulse density re-
quirements, such as inverting HDLC data.ro Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.2 |
xldv20Dsx1LoopbackConfigThis variable represents the loopback confi-
guration of the DS1 interface. Agents support-
ing read/write access should return badValue in
response to a requested loopback state that the
interface does not support. The values mean:.
dsx1NoLoop
Not in the loopback state. A device that
is not capable of performing a loopback on
the interface shall always return this as
it's value.
dsx1PayloadLoop
The received signal at this interface is
looped through the device. Typically the
received signal is looped back for re-
transmission after it has passed through
the device's framing function.
dsx1LineLoop
The received signal at this interface does
not go through the device (minimum pene-
tration) but is looped back out.
dsx1OtherLoop
Loopbacks that are not defined here.ro Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.3 |
xldv20Dsx1SignalModeThe signal mode.
'none' indicates that no bits are reserved for
signaling on this channel.
'robbedBit' indicates that T1 Robbed Bit Sig-
naling is in use.
'bitOriented' indicates that E1 Channel Asso-
ciated Signaling is in use.
'messageOriented' indicates that Common Chan-
nel Signaling is in use either on channel 16 of
an E1 link or channel 24 of a T1.ro Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.4 |
xldv20Dsx1TransmitClockSourceThe source of Transmit Clock.
'loopTiming' indicates that the recovered re-
ceive clock is used as the transmit clock.
'localTiming' indicates that a local clock
source is used.
'throughTiming' indicates that recovered re-
ceive clock from another interface is used as
the transmit clock.ro Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.5 |
xldv20Dsx1FdlThis bitmap describes the use of the facili-
ties data link, and is the sum of the capabili-
ties:
'other' indicates that a protocol other than
one following is used.
'dsx1Ansi-T1-403' refers to the FDL exchange
recommended by ANSI.
'dsx1Att-54016' refers to ESF FDL exchanges.
'dsx1Fdl-none' indicates that the device does
not use the FDL.ro Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.6 |
xldv20SdcControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.12 |
xldv20SdcCtrlControlReqTo activate a configured set of data (command: activateData).rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.1 |
xldv20SdcCtrlControlStatusIndicates the status of a control request.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.2 |
xldv20SdcCtrlIfIndexIndex to identify a sdc PPTP.rw Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.3 |
xldv20SdcCtrlRateDesired SDSL data rate. The supported line rates ranges from
160 and 2320 Kbit/sec.
The cell rate range is between 377 and 5471 cells/sec.
Default is 5 ( 160 kbps/377cps).rw Xldv20SdslDataRate .1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.4 |
xldv20SdcCtrlXdslServiceTypeThe service mode for the SDSL line.rw Xldv20SdslServiceType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.5 |
xldv20SdcCtrlControlReqResultThe result of the last user command.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.6 |
xldv20SdcCtrlControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.7 |
xldv20SdcCtrlMinMarginUpThe desired threshold for upstream margin when an alarm
should be sent (in units of dB).rw INTEGER (-127..128) .1.3.6.1.4.1.231.7.1.2.1.1.4.4.12.8 |
xldv20SdcPPTPTableThe physical path termination point table for SDSL C. SEQUENCE OF Xldv20SdcPPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13 |
xldv20SdcPPTPEntryAn entry describing a termination point in the PPTP table.
Notifications : see xldv20IfEntry. Xldv20SdcPPTPEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1 |
xldv20SdcRateCfgThe desired data rate.
The data rate ranges from 160 to 2320 Kbit/sec.
The cell rate ranges between 377 and 5471 cells/sec.
Default is 5 ( 160 kbps/377cps).ro Xldv20SdslDataRate .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.1 |
xldv20SdcXdslServiceTypeCfgThe configured service mode for SDSL line.ro Xldv20SdslServiceType .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.2 |
xldv20SdcRateThe current downstream data rate.
The data rate ranges from 160 to 2320 Kbit/sec.
The cell rate ranges between 377 and 5471 cells/sec.
Default is 5 ( 160 kbps/377cps).ro Xldv20SdslDataRateCurrent .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.3 |
xldv20SdcMarginDnNot applicable. GetRequest returns
marginNotApplicable .ro Xldv20AdslMargin .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.4 |
xldv20SdcMarginUpThe current upstream margin in units of dB.
Default is marginInvalid .ro Xldv20AdslMargin .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.5 |
xldv20SdcAttenuationDnNot applicable. GetRequest returns
attenuationNotApplicable.ro Xldv20AdslAttenuation .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.6 |
xldv20SdcAttenuationUpThe current upstream attenuation in steps of 0,5 dB.
Default is attenuationInvalid.ro Xldv20AdslAttenuation .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.7 |
xldv20SdcLinkStateThe link states of the SDSL Central Office Modem.ro Xldv20LinkState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.8 |
xldv20SdcAISOnLOSThe attribute enables or disables the VP-AIS generation
after defect LOS.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.9 |
xldv20SdcAISOnACTThe attribute enables or disables the VP-AIS generation
after link activation fault.rw Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.10 |
xldv20SdcGuaranteedBandwidthUsageThe guaranteed bandwidth in percent.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.11 |
xldv20SdcInitStatusThe initialization status field of an SDSL line.
Describes the initalization error in case of
an activation problem on an SDSL line .ro Xldv20XdslInitStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.12 |
xldv20SdcMinMarginUpCfgThe desired threshold for upstream margin when an alarm
should be sent (in units of dB).ro INTEGER (-127..128) .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.13 |
xldv20SdcTransceiverOutputPowerThe SDSL tranceiver output power. Granularity 1.0 dBm.
Default value is outputPowerInvalid.ro Xldv20AdslOutputPower .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.14 |
xldv20SdcXdslServiceTypeThe current service type resulting from the configured service
type. It depends on the actual hardware.
Configuring gDotHsMode can result either in gDotLiteMode or gDotDmtMode.
gDotAll can result in gDotDmtMode, ansiT1dot413 or gDotLiteMode.
Default value is serviceTypeUnknown (10).ro Xldv20XdslServiceTypeCurrent .1.3.6.1.4.1.231.7.1.2.1.1.4.4.13.1.15 |
xldv20TlmOam OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.5 |
xldv20LoopBackPointTableThe loop back point table SEQUENCE OF Xldv20LbpEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.5.1 |
xldv20LbpEntryAn entry in the loop back point table.
The entry holds parameters of loop back points
(as the loop location ID for loop back points or
the loop mode).
Loopback points are either the TCA at the LU* or SU
or the IMA group at the LUIMA (within the DSLAM),
or the TCA of adrPPTP at the NTAD.
Notifications : see xldv20IfEntry. Xldv20LbpEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.5.1.1 |
xldv20LbpLoopLocIdA unique number known by the crafts person specifying
the location where the OAM loopback cell shall be
looped back.
Loopback point is either the TCA at the LU* or SU (within the DSLAM)
or the TCA of adrPPTP at NTAD.
NOTE : Due to the functionality of ASPEN at SU the loop location ID
only of port 1 is configurable. The IDs for port2-16 are calculated
from this value by the ASPEN. TMN will store these values to the
corresponding table entries .rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.5.1.1.1 |
xldv20LbpLoopModeThis attribute selects for connecting points
whether the received loopback cell shall be
forwarded or forwarded and looped back .rw Xldv20LoopMode .1.3.6.1.4.1.231.7.1.2.1.1.4.5.1.1.2 |
xldv20PhyLoopTest OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.5.2 |
xldv20PltIfIndexThis attribute labels the location of the physical loopback. It
can be the ifIndex of a PPTP at LI25, LU, SU .rw Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.5.2.1 |
xldv20PltControlReqThe received command to start an OAM cell loopback test
(loopDiagRequest).
Notifications :
xldv20TrPltTestResult .rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.5.2.2 |
xldv20PltControlStatusThe status of the control request.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.5.2.3 |
xldv20PltControlTimerThis is the maximum duration of a physical loop diagnosis.
It is required by the SNMP manager to detect the end of a
physical loop diagnosis in case of the response
'xldv20TrPltTestResult' was not received in time.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.5.2.4 |
xldv20PltControlReqResultThe result of the last user command.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.5.2.5 |
xldv20PltControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.5.2.6 |
xldv20AtmLoopTest OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.5.3 |
xldv20AltIfIndexThe TLM interface where OAM cells are inserted.
It can be the 'IfIndex' of a PPTP at a LU or SU.rw Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.1 |
xldv20AltVpiIdentifies the VPI which shall be tested. It is VPINni
when test in LE direction or it is VPIUni when test in
NT direction.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.2 |
xldv20AltLoopLocIdTest cell loopback location. It is an identifier known
by the crafts person identifying a ATM node in the ATM
network. For EndToEnd loop test the default value is valid.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.3 |
xldv20AltControlReqThe received command to start an OAM cell loopback test
(loopTestRequest).
Reject reasons are faulty parameters from the agent
(response: paramFaulty, commExecStarted, loopTestReject,
commandFailed)
or a loop request during a running test (response: loopTestBusy).
Notifications : xldv20TrAltTestResult .rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.4 |
xldv20AltControlStatusThe status of the command handling.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.5 |
xldv20AltControlTimerThe maximum duration of loop- back test.
It is required by the SNMP manager to detect the end
of loopback test in case of the response'xldv20TrAltTestResult'
was not received in time.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.6 |
xldv20AltOamLevelThe OAM level for loop test on VP/VC level.
Valid: f4 (for VP ) f5 (for VC).rw Xldv20OamLevel .1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.7 |
xldv20AltLoopTestTypeThe type of loop test .
For EndToEnd loop test loop location ID is FF..FF.rw Xldv20TestType .1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.8 |
xldv20AltVciInsertion point for OAM cells for F5 levelrw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.9 |
xldv20AltControlReqResultThe result of the last user command.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.10 |
xldv20AltFlowDirectionLabels the flow direction of loop back cells.
'inwards' meanxing towards cellbus.
'outwards' meaning towards UTOPIA interface .rw Xldv20FlowDirection .1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.11 |
xldv20AltControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.5.3.12 |
xldv20MultipleLoopbackResultTableThe Multiple Loopback Result table.
Used for the multiple loopback functionality to collect
the IDs of connecting points which
looped back to the XLD.
When an ATM looptest is started the table is empty.
An entry is created when an OAM cell is received from a
connecting point. SEQUENCE OF Xldv20MlbEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.5.4 |
xldv20MlbEntryAn entry in the Multiple Loopback Result Table. Xldv20MlbEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.5.4.1 |
xldv20MlbIndexThe index of this table.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.5.4.1.1 |
xldv20MlbLoopLocIdA unique number known by the crafts person specifying
the ID of a connecting point which looped back an OAM cell
to the originating point (SU or LU) within the XLD.ro OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.5.4.1.2 |
xldv20Alarming OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.6 |
xldv20ExternalAlarmsTableThe entities of the table are used to control the
forwarding of external alarms to the TMN-OS and LCT. SEQUENCE OF Xldv20ExternalAlarmEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.6.1 |
xldv20ExternalAlarmEntryEntry of external alarm table.
Notifications : xldv20TrExternalAlarm. Xldv20ExternalAlarmEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1 |
xldv20ExtAlarmIndexA unique number identifying an entry of the
external alarm table.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1.1 |
xldv20ExtAlarmAdminStateThis attribute is used to activate (unlock) and deactivate
(lock) the forwarding of the external alarm towards the
manager.rw Xldv20AdminState .1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1.2 |
xldv20ExtAlarmOperStateIndicates whether or not the external alarm is
capable of performing its normal functions.ro Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1.3 |
xldv20ExtAlarmActivityStateThe status of the external alarm.
Only if the operational state is enabled
and the alarm state is on, an external alarm is generated
for this object.ro Xldv20ExtAlarmActivityState .1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1.4 |
xldv20ExtAlarmSeverityIndexThe index of the associated entry in the alarm severity
profile table. These entries contain the severity
assigments for the alarms reported by this managed
entity.rw Xldv20AlmSevProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1.5 |
xldv20ExtAlarmFilteringIndexIt is a pointer to the instance of the alarm filtering
assignment profile managed entity that contains the filtering
assignments for the alarms reported by this managed entity.ro Xldv20AlmFiltProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1.6 |
xldv20ExtAlarmNameDescribe the input line and the type of external alarm.
Default values on startup are :
index=1 : Fan 1 Fail
index=2 : Fan 2 Fail
index=3 : High Temperature.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.6.1.1.7 |
xldv20AlarmSeverityProfileTableThe table of alarm severity profiles.
Profiles can be created or deleted dynamically.
Creating or deleting an entry in this table automatically creates
or deletes the corresponding entries in the
xldv20AlarmSevTable. SEQUENCE OF Xldv20AlarmSeverityProfileEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.6.2 |
xldv20AlarmSeverityProfileEntryA group of severities, one for each alarm type in
the communications alarm group. Xldv20AlarmSeverityProfileEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.6.2.1 |
xldv20AlmSevProfileIndexA number identifying this alarm severity profile.ro Xldv20AlmSevProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.6.2.1.1 |
xldv20AlmSevProfileRowStatusUsed to create a new row or to delete
an existing row in the table.
Default value:
xldv20AlmSevProfileIndex = 1..10: created
xldv20AlmSevProfileIndex = 11..40: deleted .rw Xldv20RowStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.6.2.1.2 |
xldv20AlarmSeverityTableThe alarm severity table associates
profile index and trap ID pairs with severities to be
used for alarm traps that have occurred.
(Note that this table does not apply to cleared alarms). SEQUENCE OF Xldv20AlarmSeverityEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.6.3 |
xldv20AlarmSeverityEntryAn entry in this table associates an alarm severity
profile index/trap ID pair with a severity to be used
for alarm traps.
The alarm severity profile index is referenced by the
'Alarm Severity assignment Profile Pointer' attribute
in the alarm-reporting managed entity e.g. plug-in unit
and TLM interface (tcAdaptor, Physical Path Termination
Point etc.).
Notifications : none. Xldv20AlarmSeverityEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.6.3.1 |
xldv20AlmSevTrapIdThe trap ID of the alarm trap type this entry applies to.
NOTE : the severity of xldv20TrAtmLayerMultiAlarm
is not configurable.ro Xldv20TrapIds .1.3.6.1.4.1.231.7.1.2.1.1.4.6.3.1.1 |
xldv20AlmSeverityThe severity to be used for this trap type when the
entry is selected.rw Xldv20AlarmSeverity .1.3.6.1.4.1.231.7.1.2.1.1.4.6.3.1.2 |
xldv20AlarmFilteringProfileTableThe table of alarm filtering profiles.
Creating or deleting an entry in this table automatically creates
or deletes the corresponding entries in the
xldv20AlarmFilteringTable. SEQUENCE OF Xldv20AlarmFilteringProfileEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.6.4 |
xldv20AlarmFilteringProfileEntryAn entry of the alarm filtering profile table. Xldv20AlarmFilteringProfileEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.6.4.1 |
xldv20AlmFiltProfileIndexA number identifying this alarm filtering profile.ro Xldv20AlmFiltProfileIndex .1.3.6.1.4.1.231.7.1.2.1.1.4.6.4.1.1 |
xldv20AlmFiltProfileRowStatusThis object is used to create a new row or to delete
an existing row in the table.
Default value: xldv20AlmFiltProfileIndex = 1: created
xldv20AlmFiltProfileIndex = 2 .. 300: deleted .ro Xldv20RowStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.6.4.1.2 |
xldv20AlarmFilteringTableThe alarm filtering table is used for
temporairy filtering of alarms. SEQUENCE OF Xldv20AlarmFilteringEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.6.5 |
xldv20AlarmFilteringEntryAn entry in this table associates a trap id/ temporal
filter parameter with a xldv20AlmFiltProfileIndex. Xldv20AlarmFilteringEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.6.5.1 |
xldv20AlmFiltTrapIdThe ID of the trap type this entry applies to.ro Xldv20TrapIds .1.3.6.1.4.1.231.7.1.2.1.1.4.6.5.1.1 |
xldv20AlmTempFilterThe temporal filtering period in seconds.
The value 0 means no filtering.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.6.5.1.2 |
xldv20AlarmListTableThe alarm list table is used to store all reported alarms. SEQUENCE OF Xldv20AlarmListEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.6.6 |
xldv20AlarmListEntryEntry of the alarm list table.
Notifications : none. Xldv20AlarmListEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1 |
xldv20AlmIndexUnique value to identify an entry in the alarm list when the
entry is read or cleared, when the entry is created.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.1 |
xldv20AlmNatureOfAlarmGeneric trouble description of an alarm (the trap ID).ro Xldv20TrapIds .1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.2 |
xldv20AlmSpecProblemDescription of further information about an alarm.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.3 |
xldv20AlmSpecProblemTextDescription of further information about an alarm in text form.ro OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.4 |
xldv20AlmRepEntityIdThe managed entity that reported the alarm. In case of a HWM /
TLM / COH / GFH object it is the HW unit index / interface
index / vpcTP or vccTp index / External Alarm index.ro Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.5 |
xldv20AlmRepSourceSource reporting the alarm.ro Xldv20RepSource .1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.6 |
xldv20AlmFailedComponentThe managed entity which is defective.ro Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.7 |
xldv20AlmFailedComponentRepSourceThe SW application isolating the failed component.ro Xldv20RepSource .1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.8 |
xldv20AlmSeverityOfFailureThe severity of an alarm.ro Xldv20AlarmSeverity .1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.9 |
xldv20AlmPropRepairActionSuggestion of solutions to fix the problem.ro Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.10 |
xldv20AlmTimeAndDateEntry time of the report into the log.ro Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.6.6.1.11 |
xldv20AlmControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.6.7 |
xldv20AlmControlReqMarks the received command to update the alarm list
(updateAlmList) or the alarming filtering table
(updateFiltList) or the request of Atm layer multi
alarm traps (startSendingAlarms).rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.6.7.1 |
xldv20AlmControlStatusThe status of the control request. The value requestIdle
will be set after startup/recovery or after a running
test was aborted by the SNMP manager.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.6.7.2 |
xldv20AlmControlReqResultThe result of the last user command.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.6.7.3 |
xldv20AlmControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.6.7.4 |
xldv20Reset OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.6.8 |
xldv20RstControlReqRequest to perform a reset.
Notifications :
xldv20TrReplaceableUnitReset at beginning of reset PIU.
xldv20TrReplaceableUnitResetEnd at end of reset PIU.
xldv20TrRstResult for reset of CI in case of a failure occured
after the reset has been accepted.rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.6.8.1 |
xldv20RstControlStatusThe actual status of the reset procedure.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.6.8.2 |
xldv20RstLevelThe reset level.
With this attribute the TMN-OS can deside to make a reset for one
unit or the whole system.rw Xldv20ResetLevel .1.3.6.1.4.1.231.7.1.2.1.1.4.6.8.3 |
xldv20RstHwUnitIndexThe (HwUnitIndex) of the plugin unit which should get the
reset.rw Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.6.8.4 |
xldv20RstControlTimerTimer value for the trap response. Only valid if
xldv20RstControlStatus indicates requestBusy.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.6.8.5 |
xldv20RstControlReqResultThe result of the last user command.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.6.8.6 |
xldv20RstControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.6.8.7 |
xldv20Swm OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.7 |
xldv20SwmLogHandler OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.7.1 |
xldv20DbuControlReqThis attribute serves to launch a read request on either the
Software Errorlog, the Software Tracelog or the Hardware
Maintenancelog on the CI .
From XLDV2.0 error logs and trace logs of PIUs of type
SU,IL and LU are provided.
Notifications :
xldv20TrSweLogRead.
xldv20TrHwmLogRead.
xldv20TrTraceLogRead .rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.1 |
xldv20DbuControlStatusThe status of the current read request.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.2 |
xldv20DbuResultFilePathThe path (including the file name)
where the file resulting from the read request should be
stored. If this attribute does not contain a valid path
the results will be printed on screen.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.3 |
xldv20DbuLogTypeThe log to be read by the read request.rw Xldv20LogType .1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.4 |
xldv20DbuNumEntriesThe number of log entries to be read.
If it is 0 or if the passed number exceeds the
number of entries mandatoryly in the log, the entire log
will be read.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.5 |
xldv20DbuControlTimerThe timer value for trap response.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.6 |
xldv20DbuControlReqResultThe result of the last user command.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.7 |
xldv20DbuHwUnitIndexThe HwUnitIndex of the plug-in unit which log should be read.rw Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.8 |
xldv20DbuControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.7.1.9 |
xldv20SwmUpgradeControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2 |
xldv20SucUnitThe plug-in unit type to be upgraded.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.1 |
xldv20SucAllOfTypeIndicates that the loading for the dedicated
unit type may be started n-times ( sucUpgrAll ) regarding
to the number of boards of the same type within the DSLAM
or for a single unit (sucUpgrSingle ).rw Xldv20SucAllOfType .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.2 |
xldv20SucVersionNoString containing the APS version coded into the load for
the different board types (destination version).
Default value is \0. Then the default SW version should
be loaded.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.3 |
xldv20SucHwUnitIndexThe hardware unit index of the plug-in unit
to be loaded in case of an single upgrade.rw Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.4 |
xldv20SucPathNameThe pathname of SAPS content file.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.5 |
xldv20SucFileNameThe filename of SAPS content file.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.6 |
xldv20SucControlReqSW upgrade command requests from TMN.
Notifications :
xldv20TrCmuReadyForReset.
xldv20TrUnitReadyForReset.
xldv20TrActivateLoadResult.
xldv20TrPuUpgradeResult.
xldv20TrFTPError.
xldv20TrUpgradeCanceled.
xldv20TrSwVersionsSet.
xldv20TrReadSAPSContentFileReady.
xldv20TrUpgradeEndRequestResult.
xldv20TrUnitUpgradeNotRequested.rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.7 |
xldv20SucControlStatusThe status of the current request.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.8 |
xldv20SucControlTimerWait time in seconds after complete upgrade for a
unit type.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.9 |
xldv20SucNumberOfTrapsNumber of traps which have to be expected.ro Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.10 |
xldv20SucDefaultSwVersionThe default SW version.
Result of the command GetSwVersions.ro DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.11 |
xldv20SucPredecessorSwVersionThe predecessor Sw version.
Result of the command GetSwVersions.ro DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.12 |
xldv20SucPrePredecessorSwVersionThe pre predecessor Sw version.
Result of the command GetSwVersions.ro DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.13 |
xldv20SucControlReqResultThe result of the last user command.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.14 |
xldv20SucControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.7.2.15 |
xldv20SwUpgradeTaskTableTable of the current active or failed tasks of SW upgrade.
Entries for successfull loading tasks are removed
from the table.
This table is used to display the upgrade status for
single plugin units at the TMN. SEQUENCE OF Xldv20SutTaskTableEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.7.3 |
xldv20SutTaskTableEntryEntry of the SW upgrade task table.
Notifications : none. Xldv20SutTaskTableEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1 |
xldv20SutIndexUnique value to identify an entry of this table.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.1 |
xldv20SutPiuTypeIndicates the plug-in unit type to be upgraded.ro OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.2 |
xldv20SutHwUnitIndexThe HwUnitIndex of PIU to be loaded.
From this value the TMN calculates the location shelf/slot
of the plug-in unit and displays it at the GUI.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.3 |
xldv20SutSwVersionString containing the APS version which is loaded
into the plug-in unit .ro OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.4 |
xldv20SutRequesterIdentifies the requesting unit of
the current upgrade task.ro Xldv20Requester .1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.5 |
xldv20SutUpgradeStateIdentifies the current processing state of
the upgrade task.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.6 |
xldv20SutUpgradeResultThis read-only attribute informs about the result of
the performes upgrade (in case of failed upgrade
the error reason).ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.7 |
xldv20SutTimeStampThe time stamp of the task. It is updated anytime the
upgrade task state changes.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.7.3.1.8 |
xldv20StcSecureTelnetControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.7.4 |
xldv20StcTelnetAccessFeature not supported. The access mode of a telnet session.
The setting of values read, trace, write will enable
a secure telnet session with the corresponding access right.
The setting of value noAccess will disable a telnet session.rw Xldv20TelnetAccess .1.3.6.1.4.1.231.7.1.2.1.1.4.7.4.1 |
xldv20Dbm OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.8 |
xldv20DbmControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.8.1 |
xldv20DbmControlReqThe command to store the database
(backupDb) into the FEPROM of the DSLAM.
The return value commExecStarted indicates the beginning
of DB storage.
Notifications : xldv20TrDbBackup indicates the end and
the result of the database storage.rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.1 |
xldv20DbmControlStatusThe status of the control request.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.2 |
xldv20DbmControlTimerThe maximum wait time for the manager when a DB storage
request cannot be executed immediately (value commExecStarted
in the result attribute xldv20DbmControlReqResult).
The manager reads this value from the DSLAM.
The end of request indicates the trap xldv20TrDbBackup.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.3 |
xldv20DbmBackupPeriodInterval between two backup operations in hours.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.4 |
xldv20DbmBackupStartTimeStart time of next DB backup in seconds.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.5 |
xldv20DbmControlReqResultLocalThe result of the local backup request.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.6 |
xldv20DbmControlReqResultRemoteThe result of the last remote backup request.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.7 |
xldv20DbmPathAndFileNameThe path and filename (relative to the FTP root)
of the DB backup file needed for the remote backup feature.rw OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.8 |
xldv20DbmControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.8.1.9 |
xldv20TlmIma OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.9 |
xldv20ImaMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1 |
xldv20ImaGroupNumberThe number of IMA groups configured on this system.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.1 |
xldv20ImaControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2 |
xldv20ImaControlReqThe IMA control request object for IMA MIB objects.rw Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2.1 |
xldv20ImaControlMinNumLinksThe required minimum number of IMA links .rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2.2 |
xldv20ImaControlGroupIndexThe index of the IMA group.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2.3 |
xldv20ImaControlReqResultThe result of the last user command.ro Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2.4 |
xldv20ImaControlTimeStampThe time stamp of the last command (end of command).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2.5 |
xldv20ImaControlStatusThe status of the control request.ro Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2.6 |
xldv20ImaControlTimerThe maximum wait time for the manager when changing
the minimum number of active links. As the LUIMA
performs a restart the command cannot be processed
immediately ( value commExecStarted in GetResponse
for xldv20ImaControlReq ).ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.2.7 |
xldv20ImaGroupTableThe IMA Group configuration Table.
Index is ImaGroupIndex. SEQUENCE OF Xldv20ImaGroupEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3 |
xldv20ImaGroupEntryAn entry in the IMA Group table. Xldv20ImaGroupEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1 |
xldv20ImaGroupIndexThe index of the table identifying an IMA Group.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.1 |
xldv20ImaGroupRowStatusThe imaGroupRowStatus object allows create, change, and delete
operations on imaGroupTable entries.
In the first version only one IMA group for the LU-IMA will be
created during start-up.ro Xldv20RowStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.2 |
xldv20ImaGroupIfIndexThe IfIndex of the IMA group.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.3 |
xldv20ImaGroupNeStateThe current operational state of the near-end IMA Group State
Machine.ro Xldv20ImaGroupState .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.4 |
xldv20ImaGroupFeStateThe current operational state of the far-end IMA Group State
Machine.ro Xldv20ImaGroupState .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.5 |
xldv20ImaGroupFailureStatusThe current failure status of the IMA group (the reason why
the GTSM is in the down state).ro Xldv20ImaGroupFailureStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.6 |
xldv20ImaGroupSymmetrySymmetry of the IMA group.ro Xldv20ImaGroupSymmetry .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.7 |
xldv20ImaGroupMinNumTxLinksMinimum number of transmit links required to be Active for
the IMA group to be in the Operational state.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.8 |
xldv20ImaGroupMinNumRxLinksMinimum number of receive links required to be Active for
the IMA group to be in the Operational state.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.9 |
xldv20ImaGroupNeTxClkModeTransmit clocking mode used by the near-end IMA group.ro Xldv20ImaGroupTxClkMode .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.10 |
xldv20ImaGroupFeTxClkModeTransmit clocking mode used by the far-end IMA group.ro Xldv20ImaGroupTxClkMode .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.11 |
xldv20ImaGroupTxTimingRefLinkThe ifIndex of the transmit timing reference link to be
used by the near-end for IMA data cell clock recovery from
the ATM layer.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.12 |
xldv20ImaGroupRxTimingRefLinkThe ifIndex of the transmit timing reference link to be
used by the near-end for IMA data cell clock recovery toward
the ATM layer.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.13 |
xldv20ImaGroupLastChangeThe time stamp the IMA group last changed operational
state ( value of imaGroupNeState changed).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.14 |
xldv20ImaGroupTxImaIdThe IMA ID currently in use by the near-end IMA function.rw INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.15 |
xldv20ImaGroupRxImaIdThe IMA ID currently in use by the far-end IMA function.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.16 |
xldv20ImaGroupTxFrameLengthThe frame length to be used by the IMA group in the transmit
direction.ro Xldv20ImaFrameLength .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.17 |
xldv20ImaGroupRxFrameLengthValue of IMA frame length as received from remote IMA function.ro Xldv20ImaFrameLength .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.18 |
xldv20ImaGroupDiffDelayMaxThe maximum number of milliseconds of differential delay among
the links that will be tolerated on this interface.ro MilliSeconds .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.19 |
xldv20ImaGroupLeastDelayLinkThe ifIndex of the link configured in the IMA group which has
the smallest link propagation delay. This value has meaning only
if at least one link has been configured in the IMA group.ro Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.20 |
xldv20ImaGroupDiffDelayMaxObsThe latest maximum differential delay observed (in milliseconds)
between the links having the least and most link propagation delay,
among the receive links that are currently configured in the IMA
group.ro MilliSeconds .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.21 |
xldv20ImaGroupAlphaValueThis indicates the 'alpha' value used to specify the number
of consecutive invalid ICP cells to be detected before moving
to the IMA Hunt state from the IMA Sync state.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.22 |
xldv20ImaGroupBetaValueThis indicates the 'beta' value used to specify the number
of consecutive errored ICP cells to be detected before moving
to the IMA Hunt state from the IMA Sync state.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.23 |
xldv20ImaGroupGammaValueThis indicates the 'gamma' value used to specify the number
of consecutive valid ICP cells to be detected before moving
to the IMA Sync state from the IMA PreSync state.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.24 |
xldv20ImaGroupRunningSecsThe amount of time (in seconds) since this IMA group has
been in the operation (up or down).ro Gauge32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.25 |
xldv20ImaGroupUnavailSecsCount of one second intervals where the IMA Group Traffic
State Machine is Down.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.26 |
xldv20ImaGroupNeNumFailuresThe number of times a near-end group failure (Config-Aborted,
Insufficient-Links) has been reported since power-up or reboot.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.27 |
xldv20ImaGroupFeNumFailuresThe number of times a far-end group failure (Config-Aborted,
Insufficient-Links) has been reported since power-up or reboot.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.28 |
xldv20ImaGroupNumTxCfgLinksThe number of links that are configured to transmit in this IMA
group. This attribute overwrites the value of the
imaGroupNumRxActLinks attribute when the IMA group is configured
in the Symmetrical Configuration group symmetry mode.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.29 |
xldv20ImaGroupNumRxCfgLinksThe number of links that are configured to receive in this IMA
group. This attribute is overwritten by the value of the
imaGroupNumTxActLinks attribute when the IMA group is configured
in the Symmetrical Configuration group symmetry mode.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.30 |
xldv20ImaGroupNumTxActLinksThe number of links which are configured to transmit and are
currently Active in this IMA group.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.31 |
xldv20ImaGroupNumRxActLinksThe number of links which are configured to receive and are
currently Active in this IMA group.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.32 |
xldv20ImaGroupBandwidthUsageUsed bandwidth in percent.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.3.1.33 |
xldv20ImaGroupMappingTableA table mapping the 'ifIndex' values of 'imaGroupIfIndex'
to the 'imaGroupIndex' values of the corresponding IMA group.
Index is ifIndex of IMA group (atmIma). SEQUENCE OF Xldv20ImaGroupMappingEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.4 |
xldv20ImaGroupMappingEntryAn entry in the IMA Group Mapping table. Xldv20ImaGroupMappingEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.4.1 |
xldv20ImaGroupMappingIndexThe imaGroupIndex of the IMA Group which implements the
specified interface.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.4.1.1 |
xldv20ImaLinkTableThe IMA group Link Status and Configuration table. SEQUENCE OF Xldv20ImaLinkEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5 |
xldv20ImaLinkEntryAn entry in the IMA Group Link table.
Index is IfIndex of dsx1nePPTP (e1nIma). Xldv20ImaLinkEntry .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1 |
xldv20ImaLinkRowStatusThe imaLinkRowStatus object allows create, change, and delete
operations on imaLinkTable entries.
In the first version the IMA links for the LU-IMA will be
created during start-up.ro Xldv20RowStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.1 |
xldv20ImaLinkGroupIndexThe value which identifies the IMA group (imaGroupIndex)
of which this link is a member.ro Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.2 |
xldv20ImaLinkNeTxStateThe current state of the near-end transmit link.ro Xldv20ImaLinkState .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.3 |
xldv20ImaLinkNeRxStateThe current state of the near-end receive link.ro Xldv20ImaLinkState .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.4 |
xldv20ImaLinkFeTxStateThe current state of the far-end transmit link as reported
via ICP cells.ro Xldv20ImaLinkState .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.5 |
xldv20ImaLinkFeRxStateThe current state of the far-end receive link as reported
via ICP cells.ro Xldv20ImaLinkState .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.6 |
xldv20ImaLinkNeRxFailureStatusThe current link failure status of the near-end receive link as reported
via ICP cells.ro Xldv20ImaLinkFailureStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.7 |
xldv20ImaLinkFeRxFailureStatusThe current link failure status of the far-end receive link as reported
via ICP cells.ro Xldv20ImaLinkFailureStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.8 |
xldv20ImaLinkTxLidThe outgoing LID used currently on the link by the local end.
This value has meaning only if the link belongs to an IMA group.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.9 |
xldv20ImaLinkRxLidThe outgoing LID used currently on the link by the remote end.
This value has meaning only if the link belongs to an IMA group.ro INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.10 |
xldv20ImaLinkImaViolationsICP violations: count of errored, invalid or missing ICP cells,
except during SES-IMA or UAS-IMA conditions.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.11 |
xldv20ImaLinkOifAnomaliesThe number of OIF anomalies, except during SES-IMA or UAS-IMA
conditions, at the near-end. This is an optional attribute.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.12 |
xldv20ImaLinkNeSevErroredSecsCount of one second intervals containing >= 30% of the ICP cells
counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF,
AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA
condition.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.13 |
xldv20ImaLinkFeSevErroredSecsCount of one second intervals containing one or more RDI-IMA
defects, except during UAS-IMA-FE condition.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.14 |
xldv20ImaLinkNeUnavailSecsCount of unavailable seconds at near-end: unavailability begins
at the onset of 10 contiguous SES-IMA and ends at the onset
of 10 contiguous seconds with no SES-IMA.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.15 |
xldv20ImaLinkFeUnavailSecsCount of unavailable seconds at near-end: unavailability begins
at the onset of 10 contiguous SES-IMA-FE and ends at the onset
of 10 contiguous seconds with no SES-IMA-FE.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.16 |
xldv20ImaLinkNeTxUnusableSecsTx Unusable seconds: count of Tx Unusable seconds at the near-end
Tx LSM.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.17 |
xldv20ImaLinkNeRxUnusableSecsRx Unusable seconds: count of Rx Unusable seconds at the near-end
Rx LSM.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.18 |
xldv20ImaLinkFeTxUnusableSecsTx Unusable seconds: count of Tx Unusable seconds at the far-end
Tx LSM.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.19 |
xldv20ImaLinkFeRxUnusableSecsRx Unusable seconds: count of Rx Unusable seconds at the far-end
Rx LSM.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.20 |
xldv20ImaLinkNeTxNumFailuresThe number of times a near-end transmit failure alarm condition
has been entered on this link (i.e., some form of implementation
specific transmit fault).ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.21 |
xldv20ImaLinkNeRxNumFailuresThe number of times a near-end receive failure alarm condition
has been entered on this link (i.e., LIF, LODS,
RFI-IMA, Mis-Connected or some form of implementation specific receive
fault).ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.22 |
xldv20ImaLinkFeTxNumFailuresThe number of times a far-end transmit failure alarm condition
has been entered on this link (i.e., Tx-Unusable-FE). This is an
optional attribute.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.23 |
xldv20ImaLinkFeRxNumFailuresThe number of times a far-end receive failure alarm condition
has been entered on this link (i.e., Rx-Unusable-FE). This is an
optional attribute.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.24 |
xldv20ImaLinkTxStuffsCount of stuff events inserted in the transmit direction.
This is an optional attribute.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.25 |
xldv20ImaLinkRxStuffsCount of stuff events inserted in the receive direction.
This is an optional attribute.ro Counter32 .1.3.6.1.4.1.231.7.1.2.1.1.4.9.1.5.1.26 |
xldv20Traps OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.10 |
xldv20TrHpExcBERExcessive bit error rate at high order path. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.1 |
xldv20TrHpUNEQUnequipped at higher order path. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.2 |
xldv20TrLcdLoss of cell delineation. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.3 |
xldv20TrLofLos of frame. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.4 |
xldv20TrLopLoss of pointer. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.5 |
xldv20TrLosLoss of signal. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.6 |
xldv20TrMsAISAlarm indication signal at multiplexer section. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.7 |
xldv20TrMsExcBERExcessive bit error rate at multiplexer section. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.8 |
xldv20TrMsRDIRemote defect indication at multiplexer section. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.9 |
xldv20TrMsSDSignal degrade at multiplexer section. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.10 |
xldv20TrPAISAlarm indication signal at path. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.11 |
xldv20TrPRDIRemote defect indication at path. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.12 |
xldv20TrRsExcBERExcessive bit error rate at repeater section. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.13 |
xldv20TrSlmSignal label mismatch. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.14 |
xldv20TrTimTrace identification mismatch. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.15 |
xldv20TrActFaultThe ADSL C PPTP reports a link activation fault. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.16 |
xldv20TrReplaceableUnitTypeMismatchTrap to indicate that a wrong unit is plugged. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.17 |
xldv20TrReplaceableUnitFailureIndicates a unit Out Of Service. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.18 |
xldv20TrReplaceableUnitProblemIndicates a unit partly Out Of Service. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.19 |
xldv20TrReplaceableUnitNotInstalledIndicates that the unit is not plugged. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.20 |
xldv20TrReplaceableUnitSwMismatchThe SW version in the inventory data mismatches with the
configured version in the equipment holder. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.21 |
xldv20TrReplaceableUnitResetA replaceable unit is performing a reset. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.22 |
xldv20TrReplaceableUnitResetEndA replaceable unit finished a reset. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.23 |
xldv20TrStartupEndEnd of startup. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.24 |
xldv20TrLctSessionEvent concerning a LCT session . TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.25 |
xldv20TrSnmAgentRunningSNMP agent is active now. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.26 |
xldv20TrRstResultResult of reset. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.27 |
xldv20TrPltTestResultResult of loop test. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.28 |
xldv20TrStateChangeAdminThe administrative state of the reporting entity
has changed. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.29 |
xldv20TrStateChangeOperThe operational state of the reporting entity
has changed. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.30 |
xldv20TrChangeRateThis trap indicates the end of change rate request. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.31 |
xldv20TrCmuReadyForResetIndicates upgrade end. Unit is ready for reset. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.32 |
xldv20TrAltTestResultResult of ATM loop test. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.33 |
xldv20TrActivateLoadResultThis trap indicates that a replaceable unit is performing
a reset. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.34 |
xldv20TrPuUpgradeSuccUpgrade ended successfully. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.35 |
xldv20TrUpgradeCancelledThe upgrade request has been cancelled. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.36 |
xldv20TrFtpErrorSw upgrade reports a problem with FTP. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.38 |
xldv20TrSweLogReadEnd of SWE log reading. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.40 |
xldv20TrHwmLogReadEnd of HWM log reading. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.41 |
xldv20TrTraceLogReadEnd of trace log reading. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.42 |
xldv20TrVplCcCreationThe resulting indeces of a VPC creation command. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.45 |
xldv20TrVplCcDeletionThe resulting indeces of a VPC deletion command. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.46 |
xldv20TrObjCreateCreate object event.
The varBinds xldv20TvHwUnitType and xldv20TvHwContainingUnitIndex
only occure when xldv20TvRepSource = hwm. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.100 |
xldv20TrObjDeleteDelete object event.
The varBinds xldv20TvHwUnitType and xldv20TvHwContainingUnitIndex
only occure when xldv20TvRepSource = hwm. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.101 |
xldv20TrXmissionErrTransmission Error from LIETH:S. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.105 |
xldv20TrExternalAlarmExternal alarm. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.110 |
xldv20TrUnitReadyForResetIndicates upgrade end. Unit is ready for reset. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.111 |
xldv20TrHwuControlEnd of xldv20HwuControlReq. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.112 |
xldv20TrReplaceableUnitRemovedReplaceable unit removed. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.113 |
xldv20TrAISAlarm indication signal at E3/DS3. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.114 |
xldv20TrRDIRemote defect indication at E3/DS3/dsx1f. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.115 |
xldv20TrPlcpLofLoss of Plcp frame at E3/DS3. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.116 |
xldv20TrPlcpRDIPlcp Remote defect indication at E3/DS3. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.117 |
xldv20TrRemInvReadyRemote inventory ready. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.118 |
xldv20TrDbBackupResult of Storage of DB. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.119 |
xldv20TrSwVersionSetEquipment holder data updated. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.120 |
xldv20TrReadSAPSContentFileReadyEnd of SAPS content file reading. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.121 |
xldv20TrReplaceableUnitSwMissingNo SW load found in content file corresponding to mnemo code and
FW item number in equipHolder entry. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.122 |
xldv20TrInternalFaultInternal SW/HW fault. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.123 |
xldv20TrVclCcCreationThe resulting indeces of a VC CC creation command. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.127 |
xldv20TrVclCcDeletionThe resulting indeces of a VCL CC deletion command. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.128 |
xldv20TrImmMNRImmediate Margin Not Reached Fault TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.130 |
xldv20TrLprLoss of Power (dying gasp) TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.131 |
xldv20TrLolLoss of Link (ADC Los without preceding ADR Lpr) TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.132 |
xldv20TrAtmLayerMultiAlarmAtm Layer Multi Alarm TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.135 |
xldv20TrTelnetSessionSignalizes an established / stopped telnet session. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.136 |
xldv20TrVplCACProblemIndicates a warning for a resource problem
by creating a VplCC. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.137 |
xldv20TrVclCACProblemIndicates a warning for a resource problem
while creating a VclCC. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.139 |
xldv20TrWrongServiceConfigDataConfig Adc Rates out of Range for UDSL. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.141 |
xldv20TrReplaceableUnitPluggedNotification: A PIU has been plugged. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.142 |
xldv20TrReplaceableUnitUnpluggedNotification: A PIU has been unplugged. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.143 |
xldv20TrStateChangeOperExtThe operational state of the reporting external entity
has changed. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.144 |
xldv20TrLOCLoss of continuity. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.145 |
xldv20TrDbRestoreDB restoration result. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.150 |
xldv20TrUpgradeEndRequestResultResult of sucUpgrEndRequest command. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.151 |
xldv20TrUnitUpgradeNotRequestedResult of sucUpgrEndRequest command. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.152 |
xldv20TrVpcTpCreationVpcTp created TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.400 |
xldv20TrVpcTpDeletionVpcTp deleted TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.401 |
xldv20TrVpcTpCACProblemIndicates a warning for a resource problem
while creating a VpcTP TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.402 |
xldv20TrContinuityCheckVpEntryCreatedXldv20ContinuityCheckVpEntry created . TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.403 |
xldv20TrContinuityCheckVpEntryDeletedXldv20ContinuityCheckVpEntry deleted . TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.404 |
xldv20TrContinuityCheckVcEntryCreatedXldv20ContinuityCheckVcEntry created . TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.405 |
xldv20TrContinuityCheckVcEntryDeletedXldv20ContinuityCheckVcEntry deleted . TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.406 |
xldv20TrExcBERExcessive Bit Error Ratio at near-end dsx1 PPTP. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.407 |
xldv20TrLifLoss of IMA frame at near-end dsx1 PPTP. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.408 |
xldv20TrLodsLink out of Delay Sychronisation at near-end dsx1 PPTP. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.409 |
xldv20TrTxUnusableFeTx is unusable at far-end dsx1 PPTP. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.410 |
xldv20TrRxUnusableFeRx is unusable at far-end dsx1 PPTP. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.411 |
xldv20TrRfiImaRemote failure indication defect at far-end dsx1 PPTP. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.412 |
xldv20TrRAIFar-end ds1 IMA PPTP reports remote alarm indication. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.413 |
xldv20TrStartUpFeIMA group isn't able to finish startup at far-end. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.450 |
xldv20TrConfigAbortFar-end tries to use unacceptable
configuration parameter. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.451 |
xldv20TrConfigAbortFeFar-end reports unacceptable
configuration parameters. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.452 |
xldv20TrInsufficientLinksIMA group reports less than minimum number of links are active
(detected on far-end). TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.453 |
xldv20TrInsufficientLinksFeLess than minimum number of links are active for IMA group
(detected on far-end). TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.454 |
xldv20TrBlockedFeFar-end reports that it is blocked. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.455 |
xldv20TrImaMinNumOfLinksResult of imaSetMinNumTxLinks command . TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.456 |
xldv20TrStateChangeAvailThe availablity state of the reporting entity
has changed. TRAP-TYPE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.0.457 |
xldv20TrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1 |
xldv20TvStartupResultIndicates the result at end of startup. Xldv20StartupResult .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.1 |
xldv20TvStartupTypeIndicates the kind of performed restart. Xldv20StartupType .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.2 |
xldv20TvSnmLctSessionIndicates the state of a LCT session . Xldv20SnmLctSession .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.3 |
xldv20TvRepEntityThe hardware unit index (HWM) or interface index (TLM)
or index of COH reporting entities. Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.4 |
xldv20TvRepSourceIndicates the source of a reporting entity. Xldv20RepSource .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.5 |
xldv20TvTimeAndDateThe time stamp in seconds. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.6 |
xldv20TvActCcReloadResultThe result of the cross connection reload. Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.7 |
xldv20TvActCcStatusThe index (xldv20ActVpiNni) of faulty cross connect
in the table xldv20AtmCrossConnectTable. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.8 |
xldv20TvAlmNatureOfAlarmThe nature of an alarm. Corresponds to
xldv20AlarmSevTrapID. Xldv20TrapIds .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.9 |
xldv20TvAlmSpecProblemThe specific problem reported by alarming. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.10 |
xldv20TvAlmFailedComponentDescribes the failed component. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.11 |
xldv20TvAlmSeverityOfFailureThe severity of the repoprted failure. Xldv20AlarmSeverity .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.12 |
xldv20TvAlmStatusFlag indicating whether alarm appears or is cleared. Enumeration .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.13 |
xldv20TvAlmPropRepairActionIndicates proposed repair actions reported by the agent
for the problem identified by the alarm. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.14 |
xldv20TvAlmFailedComponentRepSourceIndicates the source of the reporting entity. Xldv20RepSource .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.15 |
xldv20TvStcOldAdminStatusThe old administrative status of the
entity changing its state. Xldv20AdminState .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.16 |
xldv20TvStcNewAdminStatusThe new administrative status of the
entity changing its state. Xldv20AdminState .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.17 |
xldv20TvStcOldOperStatusThe old operational state of the reporting entity. Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.18 |
xldv20TvStcNewOperStatusThe new operational state of the reporting entity. Xldv20OperState .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.19 |
xldv20TvTsrControlStatusThe control status of the test result. Xldv20ControlStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.20 |
xldv20TvRstResultThis value indicates the result of a reset request. Xldv20RstResult .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.21 |
xldv20TvRstHwUnitIndexThis value indicates the hardware unit of a reset request. Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.22 |
xldv20TvHweResetTypeThe reset type of a hardware event. Xldv20StartupType .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.23 |
xldv20TvAdcControlStatusThe result of the changeRate request. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.24 |
xldv20TvSucResultResult of software upgrade. Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.25 |
xldv20TvSucUnitcorresponds to the attribute xldSwmUpgradeControl. DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.26 |
xldv20TvSucHwUnitIndexThis attribute corresponds to the one in the group
xldSwmUpgradeControl. Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.27 |
xldv20TvSucVersionNoThis attribute corresponds to the one in the group
xldSwmUpgradeControl.
Default value: \0 DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.28 |
xldv20TvSucPathNameThis attribute corresponds to the one in the group
xldSwmUpgradeControl. DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.29 |
xldv20TvSucFileNameThis attribute corresponds to the one in the group
xldSwmUpgradeControl. DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.30 |
xldv20TvDbuSweLogReadResultThe value indicates the read result of the software
error log. Xldv20DbuReadStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.31 |
xldv20TvDbuHwmLogReadResultThe value indicates the read result of the hardware
maintenance log. Xldv20DbuReadStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.32 |
xldv20TvDbuSwTraceLogReadResultThe value indicates the read result of the software
trace log. Xldv20DbuReadStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.33 |
xldv20TvHwUnitTypeThe type of the created or deleted Hwm object. Xldv20HwUnitType .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.34 |
xldv20TvHwContainingUnitIndexHwUnitIndex of the created or deleted Hwm object. Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.35 |
xldv20TvHwContainedUnitAddrA number of the contained Unit INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.36 |
xldv20TvHwuControlResultThe result of the request xldv20HwuControlReq. Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.37 |
xldv20TvRiRemInvResultThe result of the Remote Inventory Data reading. Xldv20RiResultType .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.38 |
xldv20TvVersionNrCmuLoadThe version number of the current CI load. DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.39 |
xldv20TvBackupResultThe result of the request xldv20DbmControlReq. Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.40 |
xldv20TvVpiNniThe VpiNni value of the cross connect. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.41 |
xldv20TvVpiNniIndexThe index of the cross connect in the ATM
cross connect table. Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.42 |
xldv20TvVplTerminationPointAFor a point-to-point cross connect this attribute identifies
the instance of the VPL termination point that represents
the VPL at the LE side. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.43 |
xldv20TvVplTerminationPointZFor a point-to-point cross connect this attribute identifies
the instance of the VPL termination point that represents
the VPL at the NT side. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.44 |
xldv20TvSnmMibVersionThe version number of the current MIB . DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.47 |
xldv20TvSnmAgentVersionThe version number of the current Agent SW . DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.48 |
xldv20TvVciNniVciNni Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.49 |
xldv20TvVciNniIndexIndex of a VciNni Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.50 |
xldv20TvVclTerminationPointAIndex of a Vcl termination point at NNI side. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.51 |
xldv20TvVclTerminationPointZIndex of a Vcl termination point at UNI side. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.52 |
xldv20TvVpcTpIndexIndex of a VpcTp Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.53 |
xldv20TvVpcNniIndexIndex of a VpcTp at NNI side . Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.54 |
xldv20TvVpcUniIndexIndex of a VpcTp at UNI side . Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.55 |
xldv20TvEthVccTpIndexIndex of a VccTp . Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.56 |
xldv20TvVpiValueVPI value Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.57 |
xldv20TvVciValueVCI value Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.58 |
xldv20TvVplTpIndexIndex of a VplTp. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.59 |
xldv20TvVplIfIndexIfIndex of PPTP associated to a VplTp. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.60 |
xldv20TvAlmFailedComponentStringUp 50 times indeces of VpcTp's or VccTp's. OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.61 |
xldv20TvTelnetSessionSignalizes the status of a telnet session. Xldv20TvTelnetSessionStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.62 |
xldv20TvEthIfIndexIndex of configured Eth Entry. Integer32 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.63 |
xldv20TvCACProblemTypeproblem type when CAC problem . Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.64 |
xldv20TvCACBandwidthUsageUpused bandwidth in percent of guaranteed bandwidth (without UBR traffic). INTEGER (0..100 ) .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.65 |
xldv20TvEthVpcTpIndexIndex of VpcTp at Ethernet port. Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.66 |
xldv20TvEthEntryIndexused within TrVplCcDeletion. Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.68 |
xldv20TvRepEntityExtThe hardware unit index (HWM) or interface index (TLM)
or index of COH reporting ext. entities. Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.69 |
xldv20TvTelnetSessionUserThe Telnet user name currently logged. DisplayString .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.70 |
xldv20TvIndexSegmentIndex of entry in Xldv20ContinuityCheckVpTable
or Xldv20ContinuityCheckVcTable for
continuity check on segment level. Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.71 |
xldv20TvIndexEndToEndIndex of entry in Xldv20ContinuityCheckVpTable
or Xldv20ContinuityCheckVcTable for endToEnd continuity check. Unsigned16 .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.72 |
xldv20TvRestoreResultThe result of the DB restoration after reload. Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.75 |
xldv20TvCACBandwidthUsageDownused bandwidth downstream in percent of guaranteed bandwidth. INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.76 |
xldv20TvCallpObjectTypeSpecifies the type of COH Object . Xldv20RepSource .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.77 |
xldv20TvVpcTpIfIndexnew for V2.0 INTEGER .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.79 |
xldv20TvAlmSpecProblemTextTextual description of specific problem reported by alarming. OCTET STRING ( SIZE .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.80 |
xldv20TvImaSetNumResultResult of command imaSetMinNumTxLinks . Xldv20ControlReq .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.81 |
xldv20TvStcOldAvailStatusThe old availability state of the reporting entity. Xldv20AvailStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.82 |
xldv20TvStcNewAvailStatusThe new availability state of the reporting entity. Xldv20AvailStatus .1.3.6.1.4.1.231.7.1.2.1.1.4.10.1.83 |
xldv20TrapTypes OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.1.1.4.10.2 |