SHE-BRIDGE-MIB
This MIB contains all needed informations about bridgePorts and all supported she bridgeing features.
Main OID:
sheBridgeMib.1.3.6.1.4.1.231.7.1.2.2.1.4
1839
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
1839 total| Object Name |
|---|
sheBridgeMibThis MIB contains all needed informations about bridgePorts and all supported she bridgeing features. MODULE-IDENTITY .1.3.6.1.4.1.231.7.1.2.2.1.4 |
sheBridge OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1 |
sheBridgeBase OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1 |
sheBridgeBaseModeThe general operating mode of the bridge.ro SheBridgeModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.1 |
sheBridgeBaseTaggingModeThe general tagging mode of the bridge.ro SheBridgeTaggingModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.2 |
sheBridgeBaseMirrorPortThe Mirror port of the system. That is a sheBridgePortIndex and it could only be used on ports with bridgePortUsage = uplink. This value should be 0 if no mirror-port is configured in the systemro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.3 |
sheBridgeBaseOuterPVIDThe default PVID of the outer Vlan used by the switch fabric in case of doubleTag-Mode or if a frame with priority tag is received and no other rule to change the vlan tag will match.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.4 |
sheBridgeBaseOuterPriorityThe default .1p-Priority of the outer vlan in case of doubleTag-Mode.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.5 |
sheBridgeBaseCircuitIdFormatThe default value should be: '%N %t %S/%P:%p.%c' -> when ATM/DSL is used '%N %t %S/%P:%v' -> when Ethernet/DSL is used It is up to the customer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting circuitId is still 63 byte (overlaps will be cut off)!ro SheBridgeIdType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.6 |
sheBridgeBaseSharedVlanLearningEnable or disable the feature SharedVlanLearning in the NE.ro SheBridgeSharedVlanLearningType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.7 |
sheBridgeBaseRemoteIdFormatThe default value is: '%M' It is up to the custoumer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting remoteId is still 63 byte (overlaps will be cut off)!ro SheBridgeIdType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.8 |
sheBridgeBaseStagTPIDThe TPID of the service tag if doubleTag is enabled.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.9 |
sheBridgeBaseMacAntiSpoofingEnable or disable the feature MacAntiSpoofing in the NE.ro SheBridgeMacAntiSpoofingType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.10 |
sheBridgeBaseRoutingModeresidential or unrestricted the feature Routing Mode of BridgeBase in the NE.ro SheBridgeRoutingModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.11 |
sheBridgeBaseMaxHostNamethe maximum length of hostname for circuit-id or remote-id.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.12 |
sheBridgeBaseDlfFilterThe policy of DLF (destination lookup failur) unicast packets from uplink. Enable DLF filter -> destination-mac unknown unicast towards subscriber ports blocked Disable DLF filter -> destination-mac unknown unicast towards subscriber ports allowed default:enablero SheBridgeDlfFilterType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.13 |
sheBridgeBaseUnknownMuticastFilterThe policy of unknown multicast packets from uplink. It can be set to enable when routing mode is residential default: enable in R2.0, disable in R2.3 / R2.5.x Possible values: disable(0), enable(1) -> means enable both directions! enableDs(2) -> enable only downstream direction enableUs(3) -> enable only upstream directionro SheBridgeUnknownMulticastFilterType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.14 |
sheBridgeBaseIpoaArpReqIntervalThe interval of ARP resolution for IPoA Bridgeport Default: 0 If the value is 0, it means NE does not send any arp request to an ipoa provider edge router after the router ip address is resolved. Thus, if the ipoa provider edge router's MAC address is changed, packet uses wrong MAC address, unused one, for ipoa provider edge router.ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.15 |
sheBridgeBaseMaxIpUNIThis is the maximum number of possible IpAddresses (DHCP or fixed IP) per UNI Port. New parameter with SHE R2.8.ro SheBridgeMaxIpAddressType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.1.16 |
sheBridgeBaseControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2 |
sheBridgeBaseControlRequestsetBridgeMode: sheBridgeBaseControlMode setBridgeTaggingMode: sheBridgeBaseControlTaggingMode setBridgeMirrorPort: sheBridgeBaseControlMirrorPort setBridgeOuterVlanDefaults: sheBridgeBaseControlOuterPVID sheBridgeBaseControlOuterPriority setBridgeCircuitIdFormat: sheBridgeBaseControlCircuitIdFormat setBridgeSharedVlanLearning: sheBridgeBaseControlSharedVlanLearning setBridgeRemoteIdFormat: sheBridgeBaseControlRemoteIdFormat setBridgeStagTPID: sheBridgeBaseControlStagTPID setBridgeMacAntiSpoofing: sheBridgeBaseControlMacAntiSpoofing setBridgeRoutingMode: sheBridgeBaseControlRoutingMode setBridgeMaxHostName: sheBridgeBaseControlMaxHostName setBridgeDlfFilter: sheBridgeBaseControlDlfFilter setBridgeUnknownMulticastFilter: sheBridgeBaseControlUnknownMulticastFilter setBridgeIpoaArpReqInterval: sheBridgeBaseControlIpoaArpReqIntervalrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.1 |
sheBridgeBaseControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.2 |
sheBridgeBaseControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.3 |
sheBridgeBaseControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.4 |
sheBridgeBaseControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.5 |
sheBridgeBaseControlModeSet the basic bridge mode.rw SheBridgeModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.6 |
sheBridgeBaseControlTaggingModeSet the basic tagging mode.rw SheBridgeTaggingModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.7 |
sheBridgeBaseControlMirrorPortSet the mirror port.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.8 |
sheBridgeBaseControlOuterPVIDThe PVID of the outer Vlan in case of doubleTag-Mode.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.9 |
sheBridgeBaseControlOuterPriorityThe default .1p-Priority of the outer vlan in case of doubleTag-Mode.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.10 |
sheBridgeBaseControlCircuitIdFormatIt is up to the customer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting circuitId is still 63 byte (overlaps will be cut off)!rw SheBridgeIdType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.11 |
sheBridgeBaseControlSharedVlanLearningEnable or disable the feature SharedVlanLearning in the NE.rw SheBridgeSharedVlanLearningType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.12 |
sheBridgeBaseControlRemoteIdFormatIt is up to the customer, to select the needed informations from this list and use a meaningfull combination. Also a combination with free text is possible. The maximum total length of a resulting remoteId is still 63 byte (overlaps will be cut off)!rw SheBridgeIdType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.13 |
sheBridgeBaseControlStagTPIDThe TPID of the service tag if doubleTag is enabledrw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.14 |
sheBridgeBaseControlMacAntiSpoofingEnable or disable the feature MacAntiSpoofing in the NE.rw SheBridgeMacAntiSpoofingType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.15 |
sheBridgeBaseControlRoutingModeresidential or unrestricted the feature Routing Mode of BridgeBase in the NE.rw SheBridgeRoutingModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.16 |
sheBridgeBaseControlMaxHostNamethe maximum length of hostname for circuit-id or remote-id.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.17 |
sheBridgeBaseControlDlfFilterThe policy of DLF unicast packets from uplink.rw SheBridgeDlfFilterType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.18 |
sheBridgeBaseControlUnknownMulticastFilterThe policy of unknown multicast packets from uplink. It can be set to enable when routing mode is residential default: enable in R2.0, disable in R2.3 / R2.5.x Possible values: disable(0), enable(1) -> means enable both directions! enableDs(2) -> enable only downstream direction enableUs(3) -> enable only upstream directionrw SheBridgeUnknownMulticastFilterType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.19 |
sheBridgeBaseControlIpoaArpReqIntervalThe interval of ARP resolution for IPoA Bridgeport Default: 0 If the value is 0, it means NE does not send any arp request to an ipoa provider edge router after the router ip address is resolved. Thus, if the ipoa provider edge router's MAC address is changed, packet uses wrong MAC address, unused one, for ipoa provider edge router.rw Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.20 |
sheBridgeBaseControlMaxIpUNIThis is the maximum number of possible IpAddresses (DHCP or fixed IP) per UNI Port. New parameter with SHE R2.8. Not configurable with current release!rw SheBridgeMaxIpAddressType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.2.21 |
sheBridgePortTableThe bridgePort-Table. SEQUENCE OF SheBridgePortEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3 |
sheBridgePortEntryOne entry for every bridgePort of the system. SheBridgePortEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1 |
sheBridgePortIndexA bridgePort-identifier.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.1 |
sheSubLayerIndexIfIndex of the underlaying Interface in the interface-table, Also LAG-bridgePorts will be modeled in the interface table.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.2 |
sheSubLayerCircuitOnly used in case the bridgePort represents a PVC, otherwise equal 0. This value represent the the index for sheAdslVccTpTable, sheXdslVccTpTable or sheShdslVccTpTable depending on ifType of underlaying physical interface. This index was build by the following rule: index = (SubLayerIndex << 4) + Vcc-Number Lowest value for she is 0x0651 (ifIndex = 101 and Vcc-Number 1). Highest value for she is 0x6EC8 (ifIndex = 1772 and Vcc-Number 8).ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.3 |
sheBridgePortPVIDThe PVID of the port. Possible range is 1-4093 for subscriber ports. This value points to the corresponding vlanIndex of the sheVlanTable. The default value for subscriber bridgePorts is the ifIndex of the underlaying physical interface (sublayerindex). Uplink and LAG bridgePorts use PVID 1 as default.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.4 |
sheBridgePortPriorityDefault Priority of the bridgePort.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.5 |
sheBridgePortUsagedefaults: Dsl PVC : subscriber Adsl special: vccAggregatorNotUsed Uplink : upLink Lag : notUsed If upLink-Port is aggregated, the upLink state moves to aggregated and the Lag moves to uplink. If a physical bonding is used (Shdsl 4wire/6wire/8wire done over shdsl configuration, m-pair bonding), the master bridgeport changes his usage to physbondedSubscriber and all other members to notUsed. If a gbond bonding is used (via she-bonding-mib configuration), the master bridgeport-entry of the new bonding port changes his usage to bondingSubscriber and all other members of bonding port to bondingNotUsed. For the feature singleMacMultipleVcc, it is possible to aggregate two or more single VCC's of one physical adsl-link to the vccAggregator. The usage of the single PVC - bridgeports (subscriber) could be set to vccAggregated and the special bridgeport change his usage from vccAggregatorNotUsed to ..Used in that case. It is also possible to set this special bridgeport usage directly and in that case all bridgeports with identical sublayerindex will change her usage to vccAggregated. This configuration has additional restrictions for PVID and priority configuration. Check MSC for detailes.ro SheBridgePortUsageType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.6 |
sheBridgePortHostConfigurationProtocolUsed host configuration protocol. Valid values could none(0), useDHCP(1), usePPPoE(2). useDHCPandPPPoE(3).ro SheHostConfigurationProtocolType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.7 |
sheBridgePortCircuitIdNeeded for special Options in DHCP or PPPoE. If not configured the default format string from sheBridgeBaseCircuitIdFormat will be used.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.8 |
sheBridgePortMaxLearnPermitCountNumber of dynamic learned Mac addresses per port. The valid configuration range for dynamic MacAddress learning is 1..2147483647 (0x7fffffff). A value of -1 disable the MacAddress limitation (default for uplink) -> 'No Limit'. A value of 0 disable the dynamic MacAddress learning -> 'Disabled'. Static FdbTable entrys possible. Additional limitations depending on the used CXU or IU type are possible. The default setting for subscriber ports is 16. Note: Syntax modified with R2.8 BFR 2.0.ro Integer32 (-1 | 0 | 1..2147483647) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.9 |
sheBridgePortMcastGroupPackageListThat is a list of allowed corresponding indices of the sheIgmpMcastGroupPackageTable for this subscriber. Each index has 16 bit. If no packet is assigned, the string has 0 length.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.10 |
sheBridgePortModeMode of this bridgeport useIpoE, useIpoA, usePPPoA or useAuto. useIpoE is the default setting. This mode will also support PPPoE. useIPoA is only possible for IU_ADSL or IU_SHDSL boards. If no MacAddress is configured in the corresponding MacProfileTable-entry, the NE will autogenerate a own value. In case of usePPPoA, the IU will translate the PPPoA protocol to PPPoE. This configuration is only valid for bridgeports with SubLayerIndex placed on IU_ADSL72 with IFX chipset! A SrcMac-address in sheBridgeIUProfileTable has to be configured for the IU where these port is placed on. The configuration useAuto forces the IU to start a autodetection mode for supporting PPPoA or PPPoE.ro SheBridgePortModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.11 |
sheBridgePortTaggingModeTagging modes for bridgePort's. This modes are only valid for received frames. Tagging of transmitted frames depends on the bridgeBase-tagging mode and on the vlan-membership. off(0) Untagged frames are tagged with PVID and forwarded. Tagged frames are forwarded unchanged. That is the default value for uplink port's and should not be changed. tagged(1) Frames tagged with the configured VIDs are forwarded unchanged. Untagged frames and frames with unknown VIDs are dropped. Check sheBridgePortReplaceTag value if a received tag should be replaced by PVID. untagged(2) Untagged frames are tagged with PVID and forwarded. Tagged frames are dropped. That is the default value for subscriber port's. NOTE: SHE releases older then R2.5 will only support modes (0) and (1).ro SheBridgePortTaggingModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.12 |
sheBridgePortRemoteIdNeeded for special Options in DHCP or PPPoE. If not configured the default format string from sheBridgeBaseRemoteIdFormat will be used.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.13 |
sheBridgePortInnerPVIDThe Inner PVID of this bridgePort. Taken if no other rule given for VLAN association. The default Value is 1.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.14 |
sheBridgePortReplaceVlanTagIf configured unequal 0, the configured vlan-tag could be received and will be replaced by PVID before forwarding the frame. A zero will disable this feature. Only valid if the Bridgeport is running tagged(1) mode - otherwise must be zero. NOTE: Modified with R2.8. CG based IU's could only support one vlan tag per IU. This configuration is now used for enable/disable the feature on bridgeport-base. For enable, only the configured value from the IU global configuration will be accepted!ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.15 |
sheBridgePortInnerPriorityThe inner priority of this bridgePort. Taken if no other rule given for VLAN association. The default value is 0.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.16 |
sheBridgePortIpoaProviderRouterIpAddressThe IPoA provider edge router's ip address for this bridgePort. 0.0.0.0 is also a valid setting and force the NE together with a similar entry in sheArpFixedIpAddressTable to retrieve the needed information automatically.ro IpAddress .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.17 |
sheBridgePortPppoaSessionIdThe session id from a PPP server is for the PPPoA session.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.18 |
sheBridgePortMcastMaxJoinedGroupThe maximum number of multicast group's (channels) that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access. This configuration is only valid for bridgeports with usage 'subscriber'.ro Unsigned32 (0 | 1..32 | 255) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.19 |
sheBridgePortMcastLeaveModeIf normal leave is enabled and the client sends a leave message, the switch sends a query message to the client. When there is no response from the client, it is deleted from the multicast group. If fast leave is enabled, the client is deleted from the multicast group when the switch receives the leave message. New with R2.8: If ehtMode ('explicit host tracking') is enabled, the multicaststream will only be deleted from FDB if all members of this stream has send her leave.ro SheMcastLeaveMode .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.20 |
sheBridgePortMcastEHTModeEnables or disables the 'explicit host tracking' function. If enabled and fastleave-mode is also running, the multicaststream will only be deleted from FDB if all members of this stream has send her leave. Note: Functionality bundled in McastLeaveMode with SHE R2.8.roobsolete SheEnableType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.21 |
sheBridgePortIgmpSubscriberAccessModeWhen sheBridgePortIgmpSubscriberAccessMode is set to 0, it means the access mode is IPoE, when set to 1, it means the access mode is PPPoE. Note: Merged parameter for SHE R2.4. R2.8 will not use this configuration and ignore any modification.roobsolete SheBridgePortIgmpSubscriberAccessModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.22 |
sheBridgePortInnerPriorityOptionThis parameter configures the handling of the inner vlan tag in the doubleTagged scenario. In singleTagged Mode, this parameter definition is not used. If tagged frames are received set the .1p priority bits of this tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> no change of the received .1p priority force(3) -> per port configured .1p (sheBridgePortInnerPriority) If a tag is added to an upstream user frame, because untagged frames are received set the .1p priority bits of the added tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> per port configured .1p (sheBridgePortInnerPriority, same as force(3)) force(3) -> per port configured .1p (sheBridgePortInnerPriority) New parameters with SHE R2.7 Expanded with R2.8.ro SheBridgePortPriorityOptionType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.23 |
sheBridgePortOuterPriorityOptionThis parameter configures the handling of the outer vlan tag in the doubleTagged and singleTagged scenario. doubleTagged Scenario: If tagged frames are received set the .1p priority bits of the added outer tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> copy .1p priority from the assigned inner .1p priority (inner to outer) force(3) -> per port configured .1p (sheBridgePortPriority) If two tag's are added to an upstream user frame, because untagged frames are received set the .1p priority bits of the added outer tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> per port configured .1p (sheBridgePortPriority, same as force(3)) force(3) -> per port configured .1p (sheBridgePortPriority) singleTagged Scenario: If tagged frames are received set the .1p priority bits of the tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> no change of the received .1p priority force(3) -> per port configured .1p (sheBridgePortPriority) If untagged frames are received set the .1p priority bits of the added tag. dscp(1) -> according DSCP of IP header (use sheBridgePortPriorityMapIndex or sheBridgeIUDscpPriorityMapIndex) userTag(2) -> per port configured .1p (sheBridgePortPriority, same as force(3)) force(3) -> per port configured .1p (sheBridgePortPriority) New parameters with SHE R2.7 Expanded with R2.8.ro SheBridgePortPriorityOptionType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.24 |
sheBridgePortPriorityMapIndexThis is a pointer to a mapping entry DSCP to .1p. Value 0 (default) means there is no mapping in use or the IU specific assignment via sheBridgeIUDscpPriorityMapIndex will be used. One of these two pointer's (port specific or IU global) must be valid if sheBridgePortPriorityOption is dscp(1) and sheBridgePortUsage is subscriber(4). Used if a tag is added to an upstream user frame and sheBridgePortPriorityOption is dscp to set .1p bits. Used if an upstream user frame is tagged and sheBridgePortPriorityOption is dscp for .1p range check. NOTE: Convergate based IU's could only support ONE profile for all port's were these mapping should be used!! New parameter with SHE R2.8.ro Unsigned32 (0 | 1..16) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.25 |
sheBridgePortIpAddressPermitCountMaximum number of possible IpAddresses per BridgePort. The assignment could be done via DHCP or fixedIpAddress configuration. Note: There is an additional restriction of possible IpAddresses per UNI port which could never exceeded. Remark this if more then one bridgePort is used on a single UNI port. Additional restrictions could be possible in case of using IpAntispoofing feature. New parameter with SHE R2.8.ro SheBridgeMaxIpAddressType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.26 |
sheBridgePortMatEnabledEnable or disable the MAC address translation feature on bridgePort base. New parameter with SHE R2.8.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.27 |
sheBridgePortIpAsModeThis configuration enable/disable the feature IpAntispoofing on bridgePort base. Depending on the used mode, the IU could made the following checks: offIpAs(0) -> IpAs disabled onIpAsNoVlanCheck(1) -> IpAs enabled, Only frames with configured Ip will be forwarded. onIpAsInnerVlanCheck(2) -> IpAs enabled, Only frames with configured couple Ip-InnerTag will be forwarded. onIpAsOuterVlanCheck(3) -> IpAs enabled, Only frames with configured couple Ip-OuterTag will be forwarded. onIpAsBothVlanCheck(4) -> IpAs enabled, Only frames with configured triple Ip-InnerTag-OuterTag will be forwarded. All other frames will be discarded. Bridgeports on IU cards with wintegra chipset will not check any Vlan dependencies, don't care which onIpAsxxx - mode was selected. Only cards with convergate chipset will made the requested differentiation. There is an additional global switch for IpAs available (sheIpAntiSpoofingEnable), which will outvote this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration. New parameter with SHE R2.8.ro SheBridgePortIpAsModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.28 |
sheBridgePortEtypeVlanMapProfilePtrEthertype-VLAN mapping profile pointer to sheBridgePortEtypeVlanMapTable (sheBridgePortEtypeVlanMapProfIndex). This attribute is optional and the pointer is null when it is not assigned. Note: The bridgeport has to be untagged member of the mapped vlan, assigned via these profile. New parameter with SHE R2.8.ro Unsigned32 (0 | 1..100) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.3.1.29 |
sheBridgePortControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4 |
sheBridgePortControlRequestsetBridgePortVLANDefaults: sheBridgePortControlIndex sheBridgePortControlPVID sheBridgePortControlPriority setBridgePortUsage: sheBridgePortControlIndex sheBridgePortControlUsage setBridgePortHostConfigurationProtocol: sheBridgePortControlIndex sheBridgePortControlHostConfigurationProtocol sheBridgePortControlCircuitId setBridgePortMaxLearnPermitCount: sheBridgePortControlIndex sheBridgePortControlMaxLearnPermitCount setBridgePortMcastGroupPackageList: sheBridgePortControlIndex sheBridgePortControlMcastGroupPackageList setBridgePortFeature: sheBridgePortControlIndex sheBridgePortControlMode sheBridgePortControlTaggingMode sheBridgePortControlReplaceTag setBridgePortCircuitId: sheBridgePortControlIndex sheBridgePortControlCircuitId setBridgePortRemoteId: sheBridgePortControlIndex sheBridgePortControlRemoteId clearBridgePortCircuitId: sheBridgePortControlIndex clearBridgePortRemoteId: sheBridgePortControlIndex setBridgePortInnerPVID: sheBridgePortControlIndex sheBridgePortControlInnerPVID setBridgePortInnerPriority: sheBridgePortControlIndex sheBridgePortControlInnerPriority setBridgePortIpoaProviderRouterIpAddress: sheBridgePortControlIndex sheBridgePortControlIpoaProviderRouterIpAddress setBridgePortMcastParameter: sheBridgePortControlIndex sheBridgePortControlMcastMaxJoinedGroup sheBridgePortControlMcastLeaveMode sheBridgePortControlMcastEHTMode (obsolete with R2.8) setBridgePortIgmpSubscriberAccessMode sheBridgePortControlIndex sheBridgePortControlIgmpSubscriberAccessMode New with R2.7: setBridgePortPriorityOptions sheBridgePortControlIndex sheBridgePortControlInnerPriorityOption sheBridgePortControlOuterPriorityOption sheBridgePortControlPriorityMapIndex (new with R2.8) New with R2.8: setBridgePortMatEnabled sheBridgePortControlIndex sheBridgePortControlMatEnabled setBridgePortIpAddressPermitCount sheBridgePortControlIndex sheBridgePortControlIpAddressPermitCount setBridgePortIpAsMode (165) sheBridgePortControlIndex sheBridgePortControlIpAsMode ->sheBridgePortIpAsModeModified setBridgePortEtypeVlanMapping (166) sheBridgePortControlIndex sheBridgePortControlEtypeVlanMapProfilePtr ->sheBridgePortEtypeVlanMappingModifiedrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.1 |
sheBridgePortControlIndexThe index of the bridgePort to be configured.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.2 |
sheBridgePortControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.3 |
sheBridgePortControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.4 |
sheBridgePortControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.5 |
sheBridgePortControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.6 |
sheBridgePortControlPVIDThe PVID for that port.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.7 |
sheBridgePortControlPrioritySet the default port priority.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.8 |
sheBridgePortControlUsageOnly the values uplink, cascading, and subcascading could be interchanged. For the feature singleMacMultipleVcc, it is possible to aggregate two or more single VCC's of one physical adsl-link to the vccAggregator. The usage of the single PVC - bridgeports (subscriber) could be set to vccAggregated and the special bridgeport change his usage from vccAggregatorNotUsed to ..Used in that case. It is also possible to set this special bridgeport usage directly and in that case all bridgeports with identical sublayerindex will change her usage to vccAggregated. This configuration has additional restrictions for PVID and priority configuration. Check MSC for detailes. All other changes will be done by NE automatically based on other configurations.rw SheBridgePortUsageType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.9 |
sheBridgePortControlHostConfigurationProtocolUsed host configuration protocol. Valid values could none(0), useDHCP(1), usePPPoE(2).rw SheHostConfigurationProtocolType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.10 |
sheBridgePortControlMaxLearnPermitCountlook at table. Note: Syntax modified with R2.8 BFR 2.0.rw Integer32 (-1 | 0 | 1..2147483647) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.11 |
sheBridgePortControlMcastGroupPackageListThis bridgePort is user of this MCastGroup-Package.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.12 |
sheBridgePortControlCircuitIdLook at table.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.13 |
sheBridgePortControlModeLook at table.rw SheBridgePortModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.14 |
sheBridgePortControlTaggingModeLook at table.rw SheBridgePortTaggingModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.15 |
sheBridgePortControlRemoteIdLook at table.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.16 |
sheBridgePortControlInnerPVIDThe Inner PVID of this bridgePort. Taken if no other rule given for VLAN association. The default Value is the bridgePortIndex +1.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.17 |
sheBridgePortControlReplaceVlanTagConfigure a Vlan-Tag which should be replaced by PVID. Check table entry for details. NOTE: Modified with R2.8. CG based IU's could only support one vlan tag per IU. This configuration is now used for enable/disable the feature on bridgeport-base. For enable, only the configured value from the IU global configuration will be accepted!rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.18 |
sheBridgePortControlInnerPriorityThe inner priority of this bridgePort. Taken if no other rule given for VLAN association. The default value is the '0'.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.19 |
sheBridgePortControlIpoaProviderRouterIpAddresslook at tablerw IpAddress .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.20 |
sheBridgePortControlMcastMaxJoinedGroupThe maximum number of multicast group's that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access.rw Unsigned32 (0 | 1..32 | 255) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.21 |
sheBridgePortControlMcastLeaveModeModify subscriber leave mode.rw SheMcastLeaveMode .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.22 |
sheBridgePortControlMcastEHTModeEnables or disables the 'explicit host tracking' function. NOTE: Functionality bundled in McastLeaveMode with SHE R2.8. Will not longer used by R2.8.rw SheEnableType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.23 |
sheBridgePortControlIgmpSubscriberAccessModeWhen sheBridgePortIgmpSubscriberAccessMode is set to 0, it means the access mode is IPoE, when set to 1, it means the access mode is PPPoE. Note: Merged parameter for SHE R2.4. R2.8 will not use this configuration and ignore any modification.rwobsolete SheBridgePortIgmpSubscriberAccessModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.24 |
sheBridgePortControlInnerPriorityOptionlook at table.rw SheBridgePortPriorityOptionType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.25 |
sheBridgePortControlOuterPriorityOptionlook at table.rw SheBridgePortPriorityOptionType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.26 |
sheBridgePortControlPriorityMapIndexlook at tablerw Unsigned32 (0 | 1..16) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.27 |
sheBridgePortControlIpAddressPermitCountlook at table description.rw SheBridgeMaxIpAddressType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.28 |
sheBridgePortControlMatEnabledEnable or disable the MAC address translation feature on bridgePort base.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.29 |
sheBridgePortControlIpAsModeThis configuration enable/disable the feature IpAntispoofing on bridgePort base. Depending on the used mode, the IU could made the following checks: offIpAs(0) -> IpAs disabled onIpAsNoVlanCheck(1) -> IpAs enabled, Only frames with configured Ip will be forwarded. onIpAsInnerVlanCheck(2) -> IpAs enabled, Only frames with configured couple Ip-InnerTag will be forwarded. onIpAsOuterVlanCheck(3) -> IpAs enabled, Only frames with configured couple Ip-OuterTag will be forwarded. onIpAsBothVlanCheck(4) -> IpAs enabled, Only frames with configured triple Ip-InnerTag-OuterTag will be forwarded. All other frames will be discarded. Bridgeports on IU cards with wintegra chipset will not check any Vlan dependencies, don't care which onIpAsxxx - mode was selected. Only cards with convergate chipset will made the requested differentiation. There is an additional global switch for IpAs available (sheIpAntiSpoofingEnable), which will outvote this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration. New parameter with SHE R2.8.rw SheBridgePortIpAsModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.30 |
sheBridgePortControlEtypeVlanMapProfilePtrEthertype-VLAN mapping profile pointer to sheBridgePortEtypeVlanMapTable (sheBridgePortEtypeVlanMapProfIndex). This attribute is optional and the pointer is null when it is not assigned. New parameter with SHE R2.8.rw Unsigned32 (0 | 1..100) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.4.31 |
sheBridgePortNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5 |
sheBridgeBaseParamModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.1 |
sheBridgePortCreatedA new bridgePort was created. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.2 |
sheBridgePortDeletedA bridgePort was deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.3 |
sheBridgePortVlanDefaultsModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.4 |
sheBridgePortUsageModifiedBridgePort usage modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.5 |
sheBridgePortHostConfigurationProtocolModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.6 |
sheBridgePortMaxLearnPermitCountModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.7 |
sheBridgePortMcastGroupPackageListModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.8 |
sheBridgePortFeatureModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.9 |
sheBridgeMacProfileSrcMacAddressModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.10 |
sheBridgePortCircuitIdModifiedsend trap when bridgeport circuitid is set. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.11 |
sheBridgePortRemoteIdModifiedsend trap when bridgeport remoteid is set. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.12 |
sheBridgePortCircuitIdClearedsend trap when bridgeport circuitid is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.13 |
sheBridgePortRemoteIdClearedsend trap when bridgeport remoteid is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.14 |
sheBridgePortInnerPVIDModifiedsend trap when bridgeport inner PVID is set. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.15 |
sheBridgePortInnerPriorityModifiedsend trap when bridgeport inner priority is set. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.16 |
sheBridgePortIpoaProviderRouterIpAddressModifiedsend trap when bridgeport IPoA provider edge router's ip address is set. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.17 |
sheBridgePortMcastParameterModifiedsend trap when bridgeport mcast parameter is set. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.18 |
sheBridgePortIgmpSubscriberAccessModeModifiedsend trap when bridgeport igmp subscriber Access mode is set.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.19 |
setBridgePortPriorityOptionsModifiedsend trap when configuration of PriorityOptions parameters was modified NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.20 |
sheBridgePortMatEnabledModifiedsend trap when configuration of MatEnabled on BridgePort base was modified NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.21 |
sheBridgePortIpAddressPermitCountModifiedsend trap when configuration of permit count for DHCP was modified NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.22 |
sheBridgePortPrioMapEntryCreateda complete entry (64 dscp entries) with a default mapping is created NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.23 |
sheBridgePortPrioMapEntryDeleteda complete entry (64 dscp entries) is deleted NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.24 |
sheBridgePortPrioMapEntryModifieda single dscp entry is modified NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.25 |
sheBridgePortExtMCastParameterModifiedsend trap when bridgeport R2.8 mcast parameter are set. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.28 |
sheEtypeVlanMapProfEntryCreatedA new sheBridgePortEtypeVlanMapProfile was created in the NE. New with SHE R2.8. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.29 |
sheEtypeVlanMapProfEntryModifiedA sheBridgePortEtypeVlanMapProfile was modified in the NE. New with SHE R2.8. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.30 |
sheEtypeVlanMapProfEntryDeletedA sheBridgePortEtypeVlanMapProfile was deleted in the NE. New with SHE R2.8. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.31 |
sheBridgePortIpAsModeModifiedThe bridgePort specific IpAs mode was modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.32 |
sheBridgePortEtypeVlanMappingModifiedThe bridgePort specific EthertypeVlanMapping profile assignment was modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.33 |
sheBridgeExtResidentialModeModifiedThe port specific ext-residential mode was modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.5.40 |
sheBridgeMacProfileTableDescription. SEQUENCE OF SheBridgeMacProfileEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.1.6 |
sheBridgeMacProfileEntryNeeded for feature IpoA. Configure the used Mac-Address if this bridgeport is running in IpoA-Mode. SheBridgeMacProfileEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.1.6.1 |
sheBridgeMacProfileSrcMacAddressThe used Src-MacAddress if this port is running in IpoA - mode. If address 000000 is set, the NE will autogenerate a valid mac-address.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.1.6.1.1 |
sheBridgeMacProfileControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.7 |
sheBridgeMacProfileControlRequestsetBridgeMacProfileSrcMacAddress: sheBridgeMacProfileControlIndex sheBridgeMacProfileControlSrcMacAddressrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.1 |
sheBridgeMacProfileControlIndexThe index of the bridgePort to be configured.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.2 |
sheBridgeMacProfileControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.3 |
sheBridgeMacProfileControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.4 |
sheBridgeMacProfileControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.5 |
sheBridgeMacProfileControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.6 |
sheBridgeMacProfileControlSrcMacAddresslook at table.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.1.7.7 |
sheBridgeIUConfig OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8 |
sheBridgeIUProfileTableDescription. SEQUENCE OF SheBridgeIUProfileEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.1 |
sheBridgeIUProfileEntryNeeded to configure some IU specific settings. Index should be the entPhysicalIndex of the IU. SheBridgeIUProfileEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.1.1 |
sheBridgeIUPPPoASrcMacAddressThe used Src-MacAddress for this IU if one of her port's is running in PPPoA - mode. The PPPoA session is translated to PPPoE. This configuration should be made before a port could be switched to PPPoA - mode.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.1.1.1 |
sheBridgeIUProfileUsedMATBasisThis parameter select the basis for MAT on these IU. This will NOT enable the MAT feature himself, but select the valid configuration for this IU. If useMATperVlan (default) is selected, the settings of sheBridgePortMatEnabled will be ignored. Only settings of sheVlanMatEnable are valid, if the VLAN is used on this IU. If useMATperBridgeport is selected, the handling will be done in an opposite way. If the used basis should be changed, a reboot of the corresponding IU may be needed to come operational. New parameter with R2.8.ro SheBridgeIUProfileUsedMATBasisType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.1.1.2 |
sheBridgeIUReplaceVlanTagIf configured unequal 0, the configured vlan-tag could be received and will be replaced by PVID before forwarding the frame. A zero will disable this feature for this IU. Only valid for IU Bridgeport's which are running tagged(1) mode and only if the NE global tagging mode is singleTag. NOTE: New with R2.8. Configuration was moved from sheBridgePortTable. The corresponding entry in the bridgeport table enable/disable the feature per bridgeport.ro Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.1.1.3 |
sheBridgeIUDscpPriorityMapIndexThis is a pointer to a mapping entry DSCP to .1p. Value 0 (default) means there is no mapping in use or the port specific assignment via sheBridgePortPriorityMapIndex will be used. One of these two pointer's (port specific or IU global) must be valid if sheBridgePortPriorityOption is dscp(1) and sheBridgePortUsage is subscriber(4). Used if a tag is added to an upstream user frame and sheBridgePortPriorityOption is dscp to set .1p bits. Used if an upstream user frame is tagged and sheBridgePortPriorityOption is dscp for .1p range check. NOTE: Convergate based IU's could only support ONE profile for all port's were these mapping should be used!! New parameter with SHE R2.8.ro Unsigned32 (0 | 1..16) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.1.1.4 |
sheBridgeIUProfileControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2 |
sheBridgeIUProfileControlRequestsetBridgeIUProfilePPPoASrcMacAddress (131): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlPPPoASrcMacAddress New with R2.8: setBridgeIUProfileUsedMATBasis (132): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlUsedMATBasis setBridgeIUProfileReplaceVlanTag (133): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlReplaceVlanTag setBridgeIUProfileDscpPriorityMapProfileIndex (134): sheBridgeIUProfileControlIndex sheBridgeIUProfileControlDscpPriorityMapIndexrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.1 |
sheBridgeIUProfileControlIndexThe index of the IU to be configured.rw PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.2 |
sheBridgeIUProfileControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.3 |
sheBridgeIUProfileControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.4 |
sheBridgeIUProfileControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.5 |
sheBridgeIUProfileControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.6 |
sheBridgeIUProfileControlPPPoASrcMacAddresslook at table.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.7 |
sheBridgeIUProfileControlUsedMATBasisThis parameter select the basis for MAT on these IU. This will NOT enable the MAT feature himself, but select the valid configuration for this IU. If useMATperVlan (default) is selected, the settings of sheBridgePortMatEnabled will be ignored. Only settings of sheVlanMatEnable are valid, if the VLAN is used on this IU. If useMATperBridgeport is selected, the handling will be done in an opposite way. If the used basis should be changed, a reboot of the corresponding IU may be needed to come operational. New parameter with R2.8.rw SheBridgeIUProfileUsedMATBasisType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.8 |
sheBridgeIUProfileControlReplaceVlanTagIf configured unequal 0, the configured vlan-tag could be received and will be replaced by PVID before forwarding the frame. A zero will disable this feature for this IU. Only valid for IU Bridgeport's which are running tagged(1) mode and only if the NE global tagging mode is singleTag. NOTE: New with R2.8. Configuration was moved from sheBridgePortTable. The corresponding entry in the bridgeport table enable/disable the feature per bridgeport.rw Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.9 |
sheBridgeIUProfileControlDscpPriorityMapIndexlook at tablerw Unsigned32 (0 | 1..16) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.2.10 |
sheBridgeIUNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.3 |
sheBridgeIUProfilePPPoASrcMacAddressModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.3.1 |
sheBridgeIUProfileUsedMATBasisModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.3.2 |
sheBridgeIUProfileReplaceVlanTagModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.3.3 |
sheBridgeIUProfileDscpPriorityMapProfileIndexModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.1.8.3.4 |
sheBridgePortPriorityMapConfig OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9 |
sheBridgePortPriorityMapTableA mapping profile DSCP to .1p. Used if a tag is added to an upstream user frame (when sheBridgePortTaggingMode is untagged or tagged) and sheBridgePortPriorityOption is dscp. The first table index is the profile number. The second table index and the mapping key is the DSCP field. One default profile with index 1 always exist and can't be deleted but modified. SEQUENCE OF SheBridgePortPriorityMapEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.1 |
sheBridgePortPriorityMapEntryA mapping entry DSCP to .1p. Used if a tag is added to an upstream user frame (when sheBridgePortTaggingMode is untagged or tagged) and sheBridgePortPriorityOption is dscp. The first table index is the entry index. The second table index and the mapping key is the DSCP field. One default mapping entry with index 1 always exist and can't be deleted but modified. SheBridgePortPriorityMapEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.1.1 |
sheBridgePortPriorityMapEntryIndexThe number of the mapping profile is the first table index.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.1.1.1 |
sheBridgePortPriorityMapDscpBits 2-7 of TOS field of IP header are called DSCP. DSCP 000000 is the lowest priority (best effort). This is the second table index and the mapping key. Since zero is not allowed as table index, this value is increased by 1 (range is 1..64).ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.1.1.2 |
sheBridgePortPriorityMapPrioThe .1p priority bits in the VLAN tag is the mapping value.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.1.1.3 |
sheBridgePortPriorityMapControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2 |
sheBridgePortPrioMapControlRequestOne default mapping entry with index 1 always exist and can't be deleted but modified. createBridgePortPrioMapEntry - a complete profile (64 entries) with a default mapping is created deleteBridgePortPrioMapEntry sheBridgePortPrioMapControlIndex - a complete profile (64 entries) is deleted modifyBridgePortPrioMapEntry sheBridgePortPrioMapControlIndex sheBridgePortPrioMapControlDscp sheBridgePortPrioMapControlPrio - a single entry of a profile is modifiedrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.1 |
sheBridgePortPrioMapControlIndexThe number of the mapping entry is the first table index.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.2 |
sheBridgePortPrioMapControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.3 |
sheBridgePortPrioMapControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.4 |
sheBridgePortPrioMapControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.5 |
sheBridgePortPrioMapControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.6 |
sheBridgePortPrioMapControlDscpBits 2-7 of TOS field of IP header are called DSCP. DSCP 000000 is the lowest priority (best effort). This is the second table index and the mapping key. Since zero is not allowed as table index, this value is increased by 1 (range is 1..64).rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.7 |
sheBridgePortPrioMapControlPrioThe .1p priority bits in the VLAN tag is the mapping value.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.9.2.8 |
sheBridgePortMCastConfig OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10 |
sheBridgePortMCastConfigTableThis table contain all new defined bridgePort specific multicast configurations. New supported with SHE R2.8! SEQUENCE OF SheBridgePortMCastConfigEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.1 |
sheBridgePortMCastConfigEntryThe MCast configuration settiongs per BridgePort. SheBridgePortMCastConfigEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.1.1 |
sheBridgePortMCastBandwithLimitThis is the configured multicast bandwith limitation per bridgePort. 0 kbps indicates that no multicast traffic is allowed for the bport. The value 65535 (0xFFFF) is a special value and means unlimited access for this bridgeport (switch off feature AC - admission control - default). New parameter with SHE R2.8.ro Unsigned32 (0..500 | 65535) UNITS "100 kbps" .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.1.1.1 |
sheBridgePortMCastMinUCBandwithLimitThis is the minimum bandwidth of sustainable unicast traffic for a bridge port. M/C admission control shall include this minimum bandwidth of sustainable unicast traffic within the calculation to reserve a minimum bandwidth for VoD services. New parameter with SHE R2.8.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.1.1.2 |
sheBridgePortMCastMaxJoinedNonPremiumGroupThe maximum number of non-premium multicast group's (channels) that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access. New parameter with SHE R2.8.ro Unsigned32 (0 | 1..32 | 255) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.1.1.3 |
sheBridgePortMCastRemainBandwithIt is the remaining multicast bandwidth of a bridge port. New parameter with SHE R2.8.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.1.1.4 |
sheBridgePortMCastACStatusIt indicates the AC (admission control) status of a bridgeport, It can be accept or deny. When it is accepted, it indicates the bridgeport still has enough bandwidth for multicast access. When it is denied, it indicates the bridgeport is short of bandwidth for multicast access. 1 means accept, 0 means deny. New parameter with SHE R2.8.ro SheBridgePortACStatus .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.1.1.5 |
sheBridgePortMCastControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2 |
sheBridgePortMCastControlRequestsetBridgePortExtMCastParameter(162): sheBridgePortMCastControlIndex sheBridgePortMCastControlBandwithLimit sheBridgePortMCastControlMinUCBandwithLimit sheBridgePortMCastControlMaxJoinedNonPremiumGrouprw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.1 |
sheBridgePortMCastControlIndexThe index of the bridgePort to be configured.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.2 |
sheBridgePortMCastControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.3 |
sheBridgePortMCastControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.4 |
sheBridgePortMCastControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.5 |
sheBridgePortMCastControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.6 |
sheBridgePortMCastControlBandwithLimitThis is the configured multicast bandwith limitation per bridgePort. 0 kbps indicates that no multicast traffic is allowed for the bport. The value 655353 (0xFFFF) is a special value and means unlimited access for this bridgeport (switch off feature AC - admission control). New parameter with SHE R2.8.rw Unsigned32 (0..500 | 65535) UNITS "100 kbps" .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.11 |
sheBridgePortMCastControlMinUCBandwithLimitThis is the minimum bandwidth of sustainable unicast traffic for a bridge port. M/C admission control shall include this minimum bandwidth of sustainable unicast traffic within the calculation to reserve a minimum bandwidth for VoD services. New parameter with SHE R2.8.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.12 |
sheBridgePortMCastControlMaxJoinedNonPremiumGroupThe maximum number of non-premium multicast group's that this subscriber can join. 0 is a special value and means 'no' access. 255 is a special value and means 'unlimited' access. New parameter with SHE R2.8.rw Unsigned32 (0 | 1..32 | 255) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.10.2.13 |
sheBridgePortEtherTypeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11 |
sheBridgePortEtypeVlanMapTableThis table is used with SHE R2.8. Ethertype-VLAN mapping profiles. Index is the profile index. SEQUENCE OF SheBridgePortEtypeVlanMapEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.1 |
sheBridgePortEtypeVlanMapEntryThis table is used with SHE R2.8. Ethertype-VLAN mapping profiles. Index is the profile index. SheBridgePortEtypeVlanMapEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.1.1 |
sheBridgePortEtypeVlanMapProfIndexThe Ethertype-VLAN mapping profile index.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.1.1.1 |
sheBridgePortEtypeVlanMapEthertypeThat is a list of possible 16bit protocol type field's of the ethernet frames. The octet string is a list of two octet entries each identifying an ethertyp value The least significant byte is the second octet. The octet string has a variable length of up to 16 octets (max. 8 ethertypes in the list). examples: 0x0800 IP Internet Protocol (IPv4) 0x0806 Address Resolution Protocol (ARP) 0x8100 VLAN Tag (VLAN) 0x8863 PPPoE Discovery 0x8864 PPPoE Session The VlanMapping is applied to upstream frames matching this Ethertype's. Other frames are forwarded unchanged.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.1.1.2 |
sheBridgePortEtypeVlanMapVlanIdA VLAN identifier mapped to the Ethertype's.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.1.1.3 |
sheBridgePortEtypeVlanMapPriorityThe priority part of the VLAN tag mapped to the Ethertype's.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.1.1.4 |
sheBridgePortEtypeVlanMapControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2 |
sheBridgePortEtypeVlanMapControlRequestthe command to be executed createEtypeVlanMapProfEntry (171) sheBridgePortEtypeVlanMapCtrlEthertype sheBridgePortEtypeVlanMapCtrlVlanId sheBridgePortEtypeVlanMapCtrlPriority ->sheEtypeVlanMapProfEntryCreated modifyEtypeVlanMapProfEntry (172) sheBridgePortEtypeVlanMapCtrlProfIndex sheBridgePortEtypeVlanMapCtrlEthertype sheBridgePortEtypeVlanMapCtrlVlanId sheBridgePortEtypeVlanMapCtrlPriority ->sheEtypeVlanMapProfEntryModified deleteEtypeVlanMapProfEnty (173) sheBridgePortEtypeVlanMapCtrlProfIndex ->sheEtypeVlanMapProfEntryDeletedrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.1 |
sheBridgePortEtypeVlanMapControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.2 |
sheBridgePortEtypeVlanMapControlTimerThe maximum wait time for the manager for a long running user command.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.3 |
sheBridgePortEtypeVlanMapControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.4 |
sheBridgePortEtypeVlanMapControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.5 |
sheBridgePortEtypeVlanMapCtrlProfIndexThe Ethertype-VLAN mapping profile index (first index).rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.6 |
sheBridgePortEtypeVlanMapCtrlEthertypeThat is a list of possible 16bit protocol type field's of the ethernet frames. The octet string is a list of two octet entries each identifying an ethertyp value. The least significant byte is the second octet. The octet string has a variable length of up to 16 octets (max. 8 ethertypes in the list). examples: 0x0800 IP Internet Protocol (IPv4) 0x0806 Address Resolution Protocol (ARP) 0x8100 VLAN Tag (VLAN) 0x8863 PPPoE Discovery 0x8864 PPPoE Session The VlanMapping is applied to upstream frames matching this Ethertype's. Other frames are forwarded unchanged.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.7 |
sheBridgePortEtypeVlanMapCtrlVlanIdA VLAN identifier mapped to the Ethertype's.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.8 |
sheBridgePortEtypeVlanMapCtrlPriorityThe priority part of the VLAN tag mapped to the Ethertype's.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.11.2.9 |
sheBridgeExtResidentialConfig OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.99 |
sheBridgeExtResidentialTableOnly supported by SHE hiX5608 !! Table index is the ifIndex of uplink or trunk interfaces. SEQUENCE OF SheBridgeExtResidentialEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.1 |
sheBridgeExtResidentialEntryDescription. SheBridgeExtResidentialEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.1.1 |
sheBridgeExtResidentialModeA ext-residential mode: enable/disablero SheEnableType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.1.1.1 |
sheBridgeExtResidentialStateOperative role of the port. (uplink,cascading,aggregated,notUsed, ...)ro SheBridgePortUsageType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.1.1.2 |
sheBridgeExtResidentialControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2 |
sheBridgeExtResidentialControlRequestNew with R2.8 - Only supported by SHE hiX5608 !!: setExtResidentialMode (990): sheBridgeExtResidentialControlPortIndex sheBridgeExtResidentialControlMode ->sheBridgeExtResidentialModeModifiedrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.1 |
sheBridgeExtResidentialControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.2 |
sheBridgeExtResidentialControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.3 |
sheBridgeExtResidentialControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.4 |
sheBridgeExtResidentialControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.5 |
sheBridgeExtResidentialControlPortIndexSet the port index.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.6 |
sheBridgeExtResidentialControlModeSet the ext-residential mode.rw SheEnableType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.1.99.2.7 |
sheBridgeConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100 |
sheBridgeCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.1 |
sheBridgeComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.1.1 |
sheBridgeGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2 |
sheBridgeBaseGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.1 |
sheBridgeBaseControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.2 |
sheBridgePortGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.3 |
sheBridgePortControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.4 |
sheBridgeNotificationsGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.5 |
sheBridgeMacProfileGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.6 |
sheBridgeIUProfileGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.7 |
sheBridgeIUNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.8 |
sheBridgePortPriorityMapGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.9 |
sheBridgePortMCastGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.10 |
sheBridgePortMCastNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.11 |
sheBridgePortObsoleteGroupDescription.obsolete Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.12 |
sheBridgePortEtypeGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.14 |
sheBridgeObsoleteNotificationsGroupDescription.obsolete Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.15 |
sheBridgeExtResidentialGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.1.100.2.16 |
sheVlan OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.2 |
sheVlanTableThe vlanTable. SEQUENCE OF SheVlanEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1 |
sheVlanEntryOne entry for every existing vlan in the system. SheVlanEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1 |
sheVlanIndexA vlan-identifier.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.1 |
sheVlanNameA descriptional name for that vlan. Spaces and other special characters (: o) are not allowed!!ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.2 |
sheVlanStatusstatic, in future gvrp values: static(1), dynamic(2)ro SheVlanStatusType .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.3 |
sheVlanEgressPortsPortlist for all member of this VLAN, they will send tagged or untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.4 |
sheVlanUnTaggedPortsPortlist for members of this Vlan they will send only untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.5 |
sheVlanFdbIdFirst index of the used Filtering Table. The value would be in current implementation identical to the VlanIndex.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.6 |
sheVlanCreationTimeOnly useful in case of gvrp.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.7 |
sheVlanMulticastPermissionPermission to transmit multicast-traffic. If a vlan has this permission, it could transmit multicast-traffic or igmp-request's. Transmission of non MC traffic is always possible. NOTE: SHE R2.6 will not longer support this configuration. A McastPermission per Vlan is not needed anymore and each existing Vlan is able to transport mcast traffic.ro ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.8 |
sheVlanDhcpProviderIndexPoints to the Vlan associated Dhcp-Provider entry in the DhcpProvider-Table. Default 0 -> DHCP Relay for this Vlan is deactivated. This value should also be 0 if this vlan will be used as a DHCP or PPPoE provider vlan (sheDhcpVlanId).ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.9 |
sheVlanDefaultGatewayOnly needed if this VLAN is used as subscriber Vlan (PVID for a bridgeport) and the corresponding bridgeport use IpoA mode. Otherwise don't care. NOTE: Configuration not longer needed with R2.8. Funcionality replaced by bridgePort configuration of sheBridgePortIpoaProviderRouterIpAddress.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.10 |
sheVlanPPPoEProviderIndexPoints to the Vlan associated PPPoE-Provider entry in the DhcpProvider-Table. Default 0 -> PPPoE Relay for this Vlan is deactivated. This value should also be 0 if this vlan will be used as a PPPoE or DHCP provider vlan (sheDhcpVlanId).ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.11 |
sheVlanMgmtVlanSpecify the VLAN that doesn't allows for subscriber ports to be joined.ro Enumeration .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.12 |
sheVlanServiceTagOnlyA customer tag is not expected for the VLAN in the double tagging mode. Note: This configuration is not longer supported with SHE R2.6.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.13 |
sheVlanAgeingTimeMAC aging time for the VLAN. If the value is '0', it means that aging time for the VLAN follows global agiang time which is defined as 'sheFdbBaseAgeingTime'.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.14 |
sheVlanRoutingModeGenerally, the default routing mode is residential; all packets cannot be forwarded between subscribers on the same VLAN. But if this mode is true, the communication between subscribers becomes available. (Default: false).ro SheBridgeRoutingModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.15 |
sheVlanTunnelingL2ProtocolIf L2VPN is supported, all L2 protocol packets should be set as flood or drop. The value of this attribute is true, all L2 protocol packets is flooded to customers networks. (Default: false). Note: This configuration is not longer supported with SHE R2.8.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.16 |
sheVlanServiceTypeDefine a tagging/stripping method in NE DT mode. 1 - It is a DoubleTagging mode for a VLAN. It strips both C-tag and S-tag in DSLAM. 2 - It is a VlanStacking mode for a VLAN. It strips an S-tag in DSLAM.ro SheVlanServiceType .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.17 |
sheVlanDlfFloodIf it is enabled, DLF packets should be flooded to the line card which is set to sheVlanDlfFloodCard regardless of BridgeBase DLF state. In case it is disabled, handling of DLF packets comply with BridgeBase DLF state. The maxium number of vlan which is set to enable is 50. (Default:false)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.18 |
sheVlanDlfFloodCardThe entPhysicalIndex of the line card where to flood DLF packets from uplinkro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.19 |
sheVlanCCModeThis parameter describes the handling of broadcast (bc), unknown multicast (umc) and unknown unicast (uuc) traffic for this vlan. If cross connect mode is True all these packets are flooded in the VLAN otherwise they are droped. Supported by R2.5.1 and higher.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.21 |
sheVlanRoutedConfigure the handling of ARP request's in the NE for this vlan. Valid values: switching - A ARP request from Network side will be answered with CPE mac address. routing - A ARP request from Network side will be answered with DSLAM mac address. Supported by R2.5.1 and higher.ro SheVlanRoutedType .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.22 |
sheVlanMcastFloodIf it is enabled, all mcast packets should be flooded in this vlan.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.23 |
sheVlanMatEnableEnable or disable the MAC address translation feature on Vlan base. The feature will use the ingress vlan to decide if the mac address of a member bridgePort should be translated. For bridgePorts they receive only untagged frames, the feature could be enabled via the PVID vlan.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.24 |
sheVlanSubportServiceNameThe format identifier %R in sheBridgeBaseCircuitIdFormat, sheBridgePortCircuitId, sheBridgeBaseRemoteIdFormat and sheBridgePortRemoteId is replaced by this string. If the string is empty, %R is replaced by the VLAN ID. New parameter with SHE R2.8.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.26 |
sheVlanUplinkTranslationVlanThis parameter enable a bidirectional vlanTranslation on Uplink side. The Vlan, identified by sheVlanIndex of this table-entry (subscriber side) will be translated to the vlan configured with this parameter. 0 - disabled -> is the default value and will disable the vlan translation. 65535 - usedAsTranslationVlan -> this vlan is already in use as an Translation-Vlan and could not be translated This configuration will only be valid for protocolframes, which are routed via hostprocessor. SharedVlanLearning has to be enabled (bridgeBase parameter)! For translation of usertraffic, additional rules has to be configured!ro Integer32 (0 | 1..4093 | 65535) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.1.1.27 |
sheVlanControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2 |
sheVlanControlRequestcreateVlan: sheVlanControlIndex sheVlanControlName sheVlanControlEgressPorts sheVlanControlUntaggedPorts sheVlanControlMulticastPermision (obsolete) sheVlanControlDhcpProviderIndex sheVlanControlPPPoEProviderIndex deleteVlan: sheVlanControlIndex setVlanName: sheVlanControlIndex sheVlanControlName setVlanPorts: - change complete Portlist sheVlanControlIndex sheVlanControlEgressPorts sheVlanControlUnTaggedPorts setVlanMulticastPermission (will not longer supported with R2.6) sheVlanControlIndex sheVlanControlMulticastPermission setVlanDhcpProviderIndex: sheVlanControlIndex sheVlanControlDhcpProviderIndex setVlanDefaultGateway: sheVlanControlIndex sheVlanControlDefaultGateway setVlanPppoeProviderIndex: sheVlanControlIndex sheVlanControlPPPoEProviderIndex setVlanMgmtVlan: sheVlanControlIndex sheVlanControlMgmtVlan setVlanServiceTagOnly:(not longer supported with R2.6) sheVlanControlIndex sheVlanControlServiceTagOnly setVlanAgeingTime: sheVlanControlIndex sheVlanControlAgeingTime setVlanRoutingMode: sheVlanControlIndex sheVlanControlRoutingMode setVlanTunnelingL2Protocol: sheVlanControlIndex sheVlanControlTunnelingL2Protocol setVlanServiceType: sheVlanControlIndex sheVlanControlServiceType addVlanPorts: - add Ports to Portlist sheVlanControlIndex sheVlanControlEgressPorts sheVlanControlUnTaggedPorts deleteVlanPorts: - delete Ports from Portlist sheVlanControlIndex sheVlanControlEgressPorts setVlanDlfFlood: sheVlanControlIndex sheVlanControlDlfFlood sheVlanControlDlfFloodCard setVlanCCMode(230), sheVlanControlIndex sheVlanControlCCMode setVlanRouted(231), sheVlanControlIndex sheVlanControlRouted setVlanMcastFlood(232), sheVlanControlIndex sheVlanControlMcastFlood setVlanMatEnable(233), sheVlanControlIndex sheVlanControlMatEnable setVlanTranslation(235) sheVlanControlIndex sheVlanControlUplinkTranslationVlan modifySubportServiceName (242) sheVlanControlIndex sheVlanControlSubportServiceNamerw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.1 |
sheVlanControlIndexIndex of the table entry to be configured.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.2 |
sheVlanControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.3 |
sheVlanControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.4 |
sheVlanControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.5 |
sheVlanControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.6 |
sheVlanControlNameA descriptional name for that vlan. Spaces and other special characters (: o) are not allowed!!rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.7 |
sheVlanControlEgressPortsPortlist for all member of this VLAN, they will send tagged or untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.8 |
sheVlanControlUnTaggedPortsPortlist for members of this Vlan they will send only untagged frames. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.9 |
sheVlanControlMulticastPermissionPermission to transmit multicast-traffic. If a vlan has this permission, it could transmit multicast-traffic or igmp-request's. Transmission of non MC traffic is always possible. NOTE: SHE R2.6 will not longer support this configuration. A McastPermission per Vlan is not needed anymore and each existing Vlan is able to transport mcast traffic.rw ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.10 |
sheVlanControlDhcpProviderIndexPoints to the Vlan associated Dhcp-Provider entry in the DhcpProvider-Table. Default 0 -> DHCP Relay for this Vlan is deactivated.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.11 |
sheVlanControlDefaultGatewayLook at table.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.12 |
sheVlanControlPPPoEProviderIndexPoints to the Vlan associated PPPoE-Provider entry in the DhcpProvider-Table. Default 0 -> PPPoE Relay for this Vlan is deactivated.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.13 |
sheVlanControlMgmtVlanSpecify the VLAN that doesn't allow subscribers to join.rw Enumeration .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.14 |
sheVlanControlServiceTagOnlyA customer tag is not expected for the VLAN in the double tagging mode. Note: This configuration is not longer supported with SHE R2.6.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.15 |
sheVlanControlAgeingTimeMAC aging time for the VLAN. If the value is '0', it means that aging time for the VLAN follows global agiang time which is defined as 'sheFdbBaseAgeingTime'.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.16 |
sheVlanControlRoutingModeGenerally, the default routing mode is residential; all packets cannot be forwarded between subscribers on the same VLAN. But if this mode is true, the communication between subscribers becomes available. (Default: false).rw SheBridgeRoutingModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.17 |
sheVlanControlTunnelingL2Protocollook at table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.18 |
sheVlanControlServiceTypeSet a tagging/stripping method in NE DT mode.rw SheVlanServiceType .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.19 |
sheVlanControlDlfFloodIf it is enabled, DLF packets should be flooded to the line card which is set to sheVlanDlfFloodCard regardless of BridgeBase DLF state. In case it is disabled, handling of DLF packets comply with BridgeBase DLF state. The maxium number of vlan which is set to enable is 50. (Default:false)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.20 |
sheVlanControlDlfFloodCardThe entPhysicalIndex of the line card where to flood DLF packets from uplinkrw PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.21 |
sheVlanControlCCModelook at tablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.22 |
sheVlanControlRoutedlook at tablerw SheVlanRoutedType .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.23 |
sheVlanControlMcastFloodIf it is enabled, all mcast packets should be flooded in this vlan.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.24 |
sheVlanControlMatEnableEnable or disable the MAC address translation feature on Vlan base. The feature will use the ingress vlan to decide if the mac address of a member bridgePort should be translated. For bridgePorts they receive only untagged frames, the feature could be enabled via the PVID vlan.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.25 |
sheVlanControlSubportServiceNameThe format identifier %R in sheBridgeBaseCircuitIdFormat, sheBridgePortCircuitId, sheBridgeBaseRemoteIdFormat and sheBridgePortRemoteId is replaced by this string. If the string is empty, %R is replaced by the VLAN ID.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.27 |
sheVlanControlUplinkTranslationVlanlook at tablerw Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.2.2.28 |
sheVlanNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3 |
sheVlanCreatedA new vlan was created. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.1 |
sheVlanModifiedA vlan was modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.2 |
sheVlanDeletedA vlan was deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.3 |
sheVlanPortsModifiedA vlan portlist was modified by command setVlanPorts. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.4 |
sheVlanMgmtVlanChangedA vlan is assigned as Mgmt-Vlan. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.5 |
sheVlanServiceTagOnlyChangedA customer tagging policy for a VLAN has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.6 |
sheVlanAgeingTimeChangedMAC ageing time for a VLAN has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.7 |
sheVlanRoutingModeChangedLocal switching for a VLAN has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.8 |
sheVlanTunnelingL2ProtocolChangedL2 protocol for a VLAN has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.9 |
sheVlanServiceTypeChangedVlan service type for a VLAN has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.10 |
sheVlanDlfFloodChangedA policy for handling Dlf packets has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.11 |
sheVlanPortslistModifiedConfiguration trap after changing the current vlan portlist's by using the commands addVlanPorts or deleteVlanPorts. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.12 |
sheVlanCCModeChangedconfiguration trap NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.13 |
sheVlanRoutedChangedconfiguration trap NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.14 |
sheVlanMcastFloodChangedconfiguration trap NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.15 |
sheVlanMatEnableChangedMAC address translation feature on Vlan base changed. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.16 |
sheVlanSubportServiceNameModifiedconfiguration trap NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.18 |
sheVlanUplinkTranslationChangedConfiguration modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.2.3.19 |
sheVlanConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.2.100 |
sheVlanCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.2.100.1 |
sheVlanComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.2.100.1.1 |
sheVlanGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.2.100.2 |
sheVlanGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.2.100.2.1 |
sheVlanControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.2.100.2.2 |
sheVlanNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.2.100.2.3 |
sheRulesAndMetering OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.3 |
sheRuleTableThe she rule table. SEQUENCE OF SheRuleEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1 |
sheRuleEntryDefine pattern, matches and action's for Rule Controls. SheRuleEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1 |
sheRuleIndexA userflow-identifier.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.1 |
sheRuleTypeThis type defines the set of used pattern and actions for a rule of type. Inside one rule all used match-values have to be exact or exclude. Ignore is don't care. globalSrcMacDeny(1) Type = 1 Name = SourceMacPattern = SourceMacMatch = exact Action = Deny portFlowControl(2) Type = 2 Name = BridgePortPattern = BridgePortMatch = exact SourceMacPattern = SourceMacMatch = exact Action = Allow meteringBridgePort(3) Type = 3 Name = Priority = BridgePortPattern = BridgePortMatch = exact Action = Meter ActionParameter01 = Profile qosVlan(4) Type = 4 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = ChangeInnerPriority ActionParameter01 = newPriority qosDscp(5) Type = 5 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeInnerPriority ActionParameter01 = newPriority qosBridgePort(6) Type = 6 Name = Priority = BridgePortPattern = BridgePortMatch = exact Action = ChangeInnerPriority ActionParameter01 = newPriority providerDoubleTagVlan01(7) Type = 7 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = ChangeOuterVlan ActionParameter01 = newVlanId qosDoubleTagPriority01(8) type = 8 Name = Priority = PriorityPattern = PriorityMatch = exact Action = ChangeOuterVlan ActionParameter01 = newVlanId qosDoubleTagDscp01(9) type = 9 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeOuterVlan ActionParameter01 = newVlanId providerDoubleTagVlan02(10) Type = 10 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = ChangeOuterVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority qosDoubleTagPriority02(11) type = 11 Name = Priority = PriorityPattern = PriorityMatch = exact Action = ChangeOuterVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority qosDoubleTagDscp(12) type = 12 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeOuterVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority mirrorBridgePort(13) Type = 13 Name = Priority = VlanIdPattern = VlanIdMatch = exact Action = mirror qosDscp02(14) type = 14 Name = Priority = DscpPattern = DscpMatch = exact Action = ChangeInnerVlanTag ActionParameter01 = newVlanId ActionParameter02 = new Priority portFlowControl02(15) Type = 15 Name = Priority = DscpPattern = DscpMatch = exact BridgePortPattern = BridgePortMatch = exact Action = deny providerSingleTagVlan01(16) sheRuleControlType= 16 sheRuleControlName = sheRuleControlPriority = sheRuleControlVlanIdPattern = sheRuleControlVlanIdMatch = exact sheRuleControlAction = changeInnerVlan sheRuleControlActionParameter01 = new VlanId providerSingleTagVlan02(17) sheRuleControlType= 17 sheRuleControlName = sheRuleControlPriority = sheRuleControlVlanIdPattern = sheRuleControlVlanIdMatch = exact sheRuleControlAction = changeInnerVlanTag sheRuleControlActionParameter01 = newVlanId sheRuleControlActionParameter02 = new Priority portFlowControl03(18) sheRuleControlType= 18 sheRuleControlName = portEtherTypVlan sheRuleControlPriority = sheRuleControlEtherTypPattern = xx sheRuleControlEtherTypMatch = exact sheRuleControlBridgePortPattern = yy sheRuleControlBridgePortMatch = exact sheRuleControlAction = changeInnerVlan sheRuleControlActionParameter01 = new PVID cosTranslation(19) sheRuleControlType= 19 sheRuleControlName = cosTranslation sheRuleControlPriority = sheRuleControlPriorityPattern = xx sheRuleControlPriorityMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty etherTypTranslation(20) sheRuleControlType= 20 sheRuleControlName = etherTypTranslation sheRuleControlPriority = sheRuleControlEtherTypPattern = xx sheRuleControlEtherTypMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty vlanTranslation(21) sheRuleControlType= 21 sheRuleControlName = vlanTranslation sheRuleControlPriority = sheRuleControlVlanIdPattern = xx sheRuleControlVlanIdMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty dscpTranslation(22) sheRuleControlType= 22 sheRuleControlName = dscpTranslation sheRuleControlPriority = sheRuleControlDscpPattern = xx sheRuleControlDscpMatch = exact sheRuleControlFlowPattern = yy sheRuleControlFlowMatch = exact sheRuleControlAction = changeOuterVlan | changeOuterPriority | changeOuterTag sheRuleControlActionParameter01 = new VlanID | new Priority sheRuleControlActionParameter02 = new Priority | empty New with SHE R2.7: meteringDot1P(25) Type = 25 Name = Priority = BridgePortPattern = BridgePortMatch = exact PriorityPattern = PriorityMatch = exact Action = Meter ActionParameter01 = MeterProfile New with SHE R2.8: meteringVlan(26) (currently support only by WIN/CNX IU) Type = 26 Name = Priority = VlanIdPattern = VlanIdMatch = exact IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringDhcpOnIU(27) (currently support only by WIN/CNX IU's) Type = 27 Name = Priority = IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringDhcpOnPort(28) (currently support only by CG IU's) Type = 28 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringArpOnIU(29) (currently support only by WIN/CNX IU's) Type = 29 Name = Priority = IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringArpOnPort(30) (currently support only by CG IU's) Type = 30 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringIgmpOnIU(31) (currently support only by WIN/CNX IU's) Type = 31 Name = Priority = IUPhysIndexPattern = IUPhysIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringIgmpOnPort(32) (currently support only by CG IU's) Type = 32 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile meteringDslPort(33) (currently support only by CG IU's) Type = 33 Name = Priority = PortIfIndexPattern = PortIfIndexMatch = exact Action = Meter ActionParameter01 = MeterProfile ######## genericRule(50) sheRuleControlType= 50 In case of using the genericRule-Type the set of used pattern matches and action are not fixed. The NE has to parse the complete control-group and the managment system must send the complete control-group, but only pattern with a match-value unequal ignore will be evaluated. Be careful!! genericAdminRule(51) sheRuleControlType= 51 In case of using the genericAdminRule-Type the set of used pattern matches and action are not fixed. The NE has to parse the complete control-group and the managment system must send the complete control-group, but only pattern with a match-value unequal ignore will be evaluated. Be careful!! The only difference to rule-type 50, genericRule, is, that the AdminRule will complete handled by CXU-Software, without support of switching fabric!!ro SheRuleType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.2 |
sheRuleNameA descriptional userflow-name. The name should be unique. Spaces and other special characters (: o) are not allowed!!ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.3 |
sheRulePriorityThe priority of the rule. Usefull in case of multiple matches.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.4 |
sheRuleBridgePortPatternA sheBridgePortIndex.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.5 |
sheRuleBridgePortMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.6 |
sheRuleSourceMacPatternA single source mac-address.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.7 |
sheRuleSourceMacMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.8 |
sheRuleSourceMacStartPatternA source mac-address to define the start point of a address range.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.9 |
sheRuleSourceMacStopPatternA source mac-address to define the end point of a address range.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.10 |
sheRuleSourceMacRangeMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.11 |
sheRuleDestinationMacPatternA single destination mac-address.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.12 |
sheRuleDestinationMacMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.13 |
sheRuleDestinationMacStartPatternA destination mac-address to define the start point of a address range.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.14 |
sheRuleDestinationMacStopPatternA destination mac-address to define the end point of a address range.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.15 |
sheRuleDestinationMacRangeMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.16 |
sheRuleVlanIdPatternA sheVlanIndex.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.17 |
sheRuleVlanIdMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.18 |
sheRulePriorityPatternA .1p priority value. Range is 0-7.ro INTEGER .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.19 |
sheRulePriorityMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.20 |
sheRuleTosPatternA tos value. Range is 0..255. Inside one rule only one of three could be used: Tos or Dscp or IpPrecedence.ro INTEGER .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.21 |
sheRuleTosMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.22 |
sheRuleDscpPatternA dscp value. Range is 0-63. Inside one rule only one of three could be used: Tos or Dscp or IpPrecedence.ro INTEGER .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.23 |
sheRuleDscpMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.24 |
sheRuleEtherTypePatternA ethertype pattern match.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.25 |
sheRuleEtherTypeMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.26 |
sheRuleSourceIpAddressPatternA single source ip-address.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.27 |
sheRuleSourceIpAddressMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.28 |
sheRuleSourceIpSubnetMaskPatternA source ip-address subnet mask.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.29 |
sheRuleSourceIpSubnetMaskMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.30 |
sheRuleDestinationIpAddressPatternA single destination ip-address.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.31 |
sheRuleDestinationIpAddressMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.32 |
sheRuleDestinationIpSubnetMaskPatternA destination ip-address subnet mask.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.33 |
sheRuleDestinationIpSubnetMaskMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.34 |
sheRuleSourcePortPatternTCP/UDP Port. Source- or DestinationPort will only be evaluated if a IpProtocolPattern equal Udp or Tcp is given.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.35 |
sheRuleSourcePortMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.36 |
sheRuleDestinationPortPatternTCP/UDP Port. Source- or DestinationPort will only be evaluated if a IpProtocolPattern equal Udp or Tcp is given.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.37 |
sheRuleDestinationPortMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.38 |
sheRuleActionGives the action for the defined userflow. deny(1), allow(2), meter(3), changeInnerVlan(4), changeOuterVlan(5), changeInnerPriority(6), changeOuterPriority(7), changeTos(8), changeDscp(9), changeInnerVlanTag(10), changeOuterVlanTag(11), assignTC(12) mirror(13),ro SheRuleActionType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.39 |
sheRuleActionParameter01Define an additional parameter depence on the used action. deny,allow,mirror: not used changeTos: new Tos value changeDscp: new Dscp value changeInnerVlan: new Vlan Id changeOuterVlan: new Vlan Id meter: meterProfileIndex changeInnerPriority: new Priority (1p) changeOuterPriority: new Priority (1p) assignTC: Traffic class values 0-7 changeInnerVlanTag: new Vlan Id changeOuterVlanTag: new Vlan Idro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.40 |
sheRuleActionParameter02Define an additional parameter depence on the used action. deny,allow,mirror,changeTos, changeDscp, changeInnerVlan, changeOuterVlan, meter, changeInnerPriority, changeOuterPriority, assignTC, mirror: not used changeInnerVlanTag: new Priority (1p) changeOuterVlanTag: new Priority (1p)ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.41 |
sheRuleFlowPatternThe flow-direction for which this rule should work. 1 - upstream 2 - downstream 3 - bidirectionalro SheRuleFlowType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.42 |
sheRuleFlowMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.43 |
sheRuleIpProtocolPatternUsed L4-ProtocolType. Needed to evaluate the correct Ip-PortPattern (look at RFC791).ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.44 |
sheRuleIpProtocolMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.45 |
sheRuleIpPrecedencePatternA Ip precedence value 0-7. Inside one rule only one of three could be used: Tos or Dscp or IpPrecedence.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.46 |
sheRuleIpPrecedenceMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.47 |
sheRuleSourceMacMaskPatternBit mask for sheRuleSourceMacPattern. Will be evaluated by NE only if sheRuleSourceMacPattern is given. The NE assumes #ffffffffffff as default if no mask is present.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.48 |
sheRuleSourceMacMaskMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.49 |
sheRuleDestinationMacMaskPatternBit mask for sheRuleDestinationMacPattern. Will be evaluated by NE only if sheRuleDestinationMacPattern is given. The NE assumes #ffffffffffff as default if no mask is present.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.50 |
sheRuleDestinationMacMaskMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.51 |
sheRuleMessageTypePatternMessage Type. Currently used only if IP Protocol pattern is set to ICMP (RFC950). Otherwise ignored.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.52 |
sheRuleMessageTypeMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.53 |
sheRuleMessageCodePatternCodeType. Currently used only if IP Protocol pattern is set to ICMP and a MessageType Pattern is given (RFC950). Otherwise ignored.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.54 |
sheRuleMessageCodeMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.55 |
sheRuleGenericMatchActionHandle packet as follows if rule match. - deny(0) Drops matching packets. Action parameter: none - allow(1) Permits matching packets. Action parameter: none - meter(2) Maps an rate limiting profile. Action parameter: sheRuleGenericMatchActionMeterIndex - redirect(3) Redirects matching packets to given bridge port (uplink interface). Action parameter: sheRuleGenericMatchActionRedirPort - mirror(4) Copies matching packets to mirror monitor port. Action parameter: none - setDscp(5) Sets DSCP value in matching packets. Action parameter: sheRuleGenericMatchActionDscp - setPriority(6) Schedules matching frames (queue mapping) according given priority value. Action parameter: sheRuleGenericMatchActionSetPrio - changeTagPriority(7) Changes .1p priority value in VLAN tag. Action parameter: sheRuleGenericMatchActionSetTagPrio - changeTagPriorityWithTos(8) Copies IP Precedence Bits of TOS field into .1p priority of VLAN tag. Action parameter: none - setIpPrecedence(9) Sets IP Precedence bits in TOS field. Action parameter: sheRuleGenericMatchActionIpPrecedence - changeTosWithTagPrio(10) Action parameter: none - rateLimit(11) Applies rate limiting for matching packets. Action parameter: sheRuleGenericMatchActionRate - changeVlanId(12) Changes Vlan-ID in VLAN-Tag of matching frames. Action parameter: sheRuleActionVlan - copyToCpu(13) Copies matching frames to CPU port. Action parameter: none - count(14) Initiates counting of matching packets. The NE supports only a limited number of counters at the same time and may reject this rule if the number of timers is exceeded. - untag (15) untag the framero SheRuleGenericActionType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.56 |
sheRuleGenericNoMatchActionHandle packet as follows if rule not match. - deny(0) Drops matching packets. Action parameter: none - allow(1) Permits matching packets. Action parameter: none - meter(2) Maps an rate limiting profile. Action parameter: sheRuleGenericNoMatchActionMeterIndex - redirect(3) Redirects matching packets to given bridge port (uplink interface). Action parameter: sheRuleGenericNoMatchActionRedirPort - mirror(4) Copies matching packets to mirror monitor port. Action parameter: none - setDscp(5) Sets DSCP value in matching packets. Action parameter: sheRuleGenericNoMatchActionDscp - setPriority(6) Schedules matching frames (queue mapping) according given priority value. Action parameter: sheRuleActionSetPrio - changeTagPriority(7) Changes .1p priority value in VLAN tag. Action parameter: sheRuleGenericNoMatchActionSetTagPrio - changeTagPriorityWithTos(8) Copies IP Precedence Bits of TOS field into .1p priority of VLAN tag. Action parameter: none - setIpPrecedence(9) Sets IP Precedence bits in TOS field. Action parameter: sheRuleGenericNoMatchActionIpPrecedence - changeTosWithTagPrio(10) Action parameter: none - rateLimit(11) Applies rate limiting for matching packets. Action parameter: sheRuleGenericNoMatchActionRate - changeVlanId(12) Changes Vlan-ID in VLAN-Tag of matching frames. Action parameter: sheRuleGenericNoMatchActionVlan - copyToCpu(13) Copies matching frames to CPU port. Action parameter: none - count(14) Initiates counting of matching packets. The NE supports only a limited number of counters at the same time and may reject this rule if the number of timers is exceeded. - untag (15) untag the framero SheRuleGenericActionType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.57 |
sheRuleGenericMatchActionParameterMeterIndexMetering Profile Index used by genericrule action: meter(2)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.58 |
sheRuleGenericMatchActionParameterRedirPortBridgePort Index used by rule action: redirect(3)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.59 |
sheRuleGenericMatchActionParameterDscpDSCP value used by rule action: setDscp(5)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.60 |
sheRuleGenericMatchActionParameterPriorityPriority value used by rule action: setPriority(6)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.61 |
sheRuleGenericMatchActionParameterTagPriorityPriority value used by rule action: changeTagPriority(7)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.62 |
sheRuleGenericMatchActionParameterIpPrecedenceIP Precedence value used by rule action: setIpPrecedence(9)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.63 |
sheRuleGenericMatchActionParameterRateRate limit value (MBit per second) used by rule action: rateLimit(11)ro Unsigned32 UNITS "MBit/s" .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.64 |
sheRuleGenericMatchActionParameterVlanIdVlan ID used by rule action: changeVlanId(12)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.65 |
sheRuleGenericNoMatchActionParameterMeterIndexMetering Profile Index used by rule action: ---ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.66 |
sheRuleGenericNoMatchActionParameterRedirPortBridgePort Index used by rule action: redirect(3)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.67 |
sheRuleGenericNoMatchActionParameterDscpDSCP value used by rule action: setDscp(5)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.68 |
sheRuleGenericNoMatchActionParameterPriorityPriority value used by rule action: setPriority(6)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.69 |
sheRuleGenericNoMatchActionParameterTagPriorityPriority value used by rule action: changeTagPriority(7)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.70 |
sheRuleGenericNoMatchActionParameterIpPrecedenceIP Precedence value used by rule action: setIpPrecedence(9)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.71 |
sheRuleGenericNoMatchActionParameterRateRate limit value (MBit per second) used by rule action: rateLimit(11)ro Unsigned32 UNITS "MBit/s" .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.72 |
sheRuleGenericNoMatchActionParameterVlanIdVlan ID used by rule action: changeVlanId(12)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.73 |
sheRuleMatchCounterNumber of matches (how often the rule has been matched). Note: Not all rules types support counters. The NE responds the value -1 if there is no counter available.ro Integer32 (-1..2147483647) .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.74 |
sheRuleActivationStateShow the activation state of a rule. A change of this value will not be notified by trap.ro SheRuleActivationStateType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.75 |
sheRuleInnerVlanIdPatternMatch the inner vlanid under double-tag mode.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.76 |
sheRuleInnerVlanIdMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.77 |
sheRuleInnerPriorityPatternMatch the inner .1p priority under double-tag mode.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.78 |
sheRuleInnerPriorityMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.79 |
sheRuleIUPhysIndexPatternMatch the IU entPhysIndex from entPhysicalTable.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.82 |
sheRuleIUPhysIndexMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.83 |
sheRulePortIfIndexPatternMatch the DSL port ifIndex from ifTable.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.84 |
sheRulePortIfIndexMatchDefines the usage of the corresponding pattern-value. ignore(1), exact(2), exclude(3)ro SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.1.1.85 |
sheRuleControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2 |
sheRuleControlRequestcreateRule: sheRuleControlName ... minimum of one pair of pattern-match-combination with a match-value unequal to ignore ... sheRuleControlAction sheRuleControlActionParameter01 ... deleteRule: sheRuleControlIndex clearRuleMatchCounter: sheRuleControlIndexrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.1 |
sheRuleControlIndexThe index of the deleted rule.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.2 |
sheRuleControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.3 |
sheRuleControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.4 |
sheRuleControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.5 |
sheRuleControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.6 |
sheRuleControlTypeThis type defines the set of used pattern and actions for this rule: look at rule-table.rw SheRuleType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.7 |
sheRuleControlNameA descriptional userflow-name. The name should be unique, but there is a exception: In case of using a expand-Ruletype, the name of the expanding rule must be equal to the original rule, which should be expanded. Spaces and other special characters (: o) are not allowed!!rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.8 |
sheRuleControlPriorityThe priority of the rule. Usefull in case of multiple matches.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.9 |
sheRuleControlBridgePortPatternlook at rule table...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.10 |
sheRuleControlBridgePortMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.11 |
sheRuleControlSourceMacPatternlook at rule table...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.12 |
sheRuleControlSourceMacMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.13 |
sheRuleControlSourceMacStartPatternlook at rule table...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.14 |
sheRuleControlSourceMacStopPatternlook at rule table...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.15 |
sheRuleControlSourceMacRangeMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.16 |
sheRuleControlDestinationMacPatternlook at rule table...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.17 |
sheRuleControlDestinationMacMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.18 |
sheRuleControlDestinationMacStartPatternlook at rule table...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.19 |
sheRuleControlDestinationMacStopPatternlook at rule table...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.20 |
sheRuleControlDestinationMacRangeMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.21 |
sheRuleControlVlanIdPatternlook at rule table...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.22 |
sheRuleControlVlanIdMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.23 |
sheRuleControlPriorityPatternlook at rule table...rw INTEGER .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.24 |
sheRuleControlPriorityMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.25 |
sheRuleControlTosPatternlook at rule table...rw INTEGER .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.26 |
sheRuleControlTosMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.27 |
sheRuleControlDscpPatternlook at rule table...rw INTEGER .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.28 |
sheRuleControlDscpMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.29 |
sheRuleControlEtherTypePatternlook at rule table...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.30 |
sheRuleControlEtherTypeMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.31 |
sheRuleControlSourceIpAddressPatternlook at rule table...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.32 |
sheRuleControlSourceIpAddressMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.33 |
sheRuleControlSourceIpSubnetMaskPatternlook at rule table...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.34 |
sheRuleControlSourceIpSubnetMaskMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.35 |
sheRuleControlDestinationIpAddressPatternlook at rule table...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.36 |
sheRuleControlDestinationIpAddressMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.37 |
sheRuleControlDestinationIpSubnetMaskPatternlook at rule table...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.38 |
sheRuleControlDestinationIpSubnetMaskMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.39 |
sheRuleControlSourcePortPatternlook at rule table...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.40 |
sheRuleControlSourcePortMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.41 |
sheRuleControlDestinationPortPatternlook at rule table...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.42 |
sheRuleControlDestinationPortMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.43 |
sheRuleControlActionlook at rule table...rw SheRuleActionType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.44 |
sheRuleControlActionParameter01look at rule table...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.45 |
sheRuleControlActionParameter02look at rule table...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.46 |
sheRuleControlFlowPatternlook at rule table...rw SheRuleFlowType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.47 |
sheRuleControlFlowMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.48 |
sheRuleControlIpProtocolPatternlook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.49 |
sheRuleControlIpProtocolMatchlook at tablerw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.50 |
sheRuleControlIpPrecedencePatternlook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.51 |
sheRuleControlIpPrecedenceMatchlook at tablerw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.52 |
sheRuleControlSourceMacMaskPatternlook at tablerw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.53 |
sheRuleControlSourceMacMaskMatchlook at tablerw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.54 |
sheRuleControlDestinationMacMaskPatternlook at tablerw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.55 |
sheRuleControlDestinationMacMaskMatchlook at tablerw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.56 |
sheRuleControlMessageTypePatternlook at tablerw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.57 |
sheRuleControlMessageTypeMatchlook at tablerw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.58 |
sheRuleControlMessageCodePatternlook at tablerw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.59 |
sheRuleControlMessageCodeMatchlook at tablerw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.60 |
sheRuleControlGenericMatchActionlook at rule table...rw SheRuleGenericActionType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.61 |
sheRuleControlGenericNoMatchActionlook at rule table...rw SheRuleGenericActionType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.62 |
sheRuleControlGenericMatchActionParameterMeterIndexlook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.63 |
sheRuleControlGenericMatchActionParameterRedirPortlook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.64 |
sheRuleControlGenericMatchActionParameterDscplook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.65 |
sheRuleControlGenericMatchActionParameterPrioritylook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.66 |
sheRuleControlGenericMatchActionParameterTagPrioritylook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.67 |
sheRuleControlGenericMatchActionParameterIpPrecedencelook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.68 |
sheRuleControlGenericMatchActionParameterRatelook at tablerw Unsigned32 UNITS "MBit/s" .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.69 |
sheRuleControlGenericMatchActionParameterVlanIdlook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.70 |
sheRuleControlGenericNoMatchActionParameterMeterIndexlook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.71 |
sheRuleControlGenericNoMatchActionParameterRedirPortlook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.72 |
sheRuleControlGenericNoMatchActionParameterDscplook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.73 |
sheRuleControlGenericNoMatchActionParameterPrioritylook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.74 |
sheRuleControlGenericNoMatchActionParameterTagPrioritylook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.75 |
sheRuleControlGenericNoMatchActionParameterIpPrecedencelook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.76 |
sheRuleControlGenericNoMatchActionParameterRatelook at tablerw Unsigned32 UNITS "MBit/s" .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.77 |
sheRuleControlGenericNoMatchActionParameterVlanIdlook at tablerw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.78 |
sheRuleControlInnerVlanIdPatternMatch the inner vlanid under double-tag mode.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.79 |
sheRuleControlInnerVlanIdMatchlook at tablerw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.80 |
sheRuleControlInnerPriorityPatternlook at tablerw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.81 |
sheRuleControlInnerPriorityMatchlook at tablerw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.82 |
sheRuleControlIUPhysIndexPatternlook at rule table...rw PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.85 |
sheRuleControlIUPhysIndexMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.86 |
sheRuleControlPortIfIndexPatternlook at rule table...rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.87 |
sheRuleControlPortIfIndexMatchlook at rule table...rw SheRuleMatchType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.2.88 |
sheRuleNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.3.3 |
sheRuleCreatedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.3.3.1 |
sheRuleDeletedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.3.3.2 |
sheRuleModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.3.3.3 |
sheMeterProfileTableThe meter profile table. SEQUENCE OF SheMeterProfileEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.3.4 |
sheMeterProfileEntryOne entry for each metering profile. Selection of the used profile will be done via rule-configuration. Note: DS policing will currently not supported by the NE (information stand R2.8)! SheMeterProfileEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1 |
sheMeterProfileIndexA profile-table index.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.1 |
sheMeterProfileNameA descriptional name for this metering profile. Spaces and other special characters (: o) are not allowed!!ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.2 |
sheMeterProfileCirThe Committed Information Rate for upstream policing. ATTENTION: CIR smaller or equal PIRro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.3 |
sheMeterProfileCbsThe Committed Burst Size for upstream policing. ATTENTION: CBS smaller or equal PBS (MBS)ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.4 |
sheMeterProfilePirThe peak information rate for upstream policing. ATTENTION: CIR smaller or equal PIRro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.5 |
sheMeterProfilePbsThe peak burst size (or maximum burst size MBS) for upstream policing. ATTENTION: CBS smaller or equal PBS (MBS)ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.6 |
sheMeterProfileDsCirThe Committed Information Rate for downstream policing. ATTENTION: DsCIR smaller or equal DsPIRro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.7 |
sheMeterProfileDsCbsThe Committed Burst Size for downstream policing. ATTENTION: DsCBS smaller or equal DsPBS (MBS)ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.8 |
sheMeterProfileDsPirThe peak information rate for downstream policing. ATTENTION: DsCIR smaller or equal DsPIRro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.9 |
sheMeterProfileDsPbsThe peak burst size (or maximum burst size MBS) for downstream policing. ATTENTION: DsCBS smaller or equal DsPBS (MBS)ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.10 |
sheMeterProfileUseParametersThis defines a bit-map for using the meterprofile parameter settings. If the corresponding bit is set to one the parameters should be used. - policingUS(0) - policingDS(1) Note: DS policing will currently not supported by the NE (information stand R2.8)!ro SheMeterProfileUseParametersType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.4.1.13 |
sheMeterControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5 |
sheMeterControlRequestcreateMeterProfile: sheMeterControlProfileName sheMeterControlProfileCir sheMeterControlProfileCbs sheMeterControlProfilePir sheMeterControlProfilePbs sheMeterControlProfileDsCir sheMeterControlProfileDsCbs sheMeterControlProfileDsPir sheMeterControlProfileDsPbs sheMeterControlProfileDsShapingCir sheMeterControlProfileDsShapingCbs sheMeterControlProfileUseParameters deleteMeterProfile: sheMeterControlIndex modifyMeterProfile: sheMeterControlIndex sheMeterControlProfileName sheMeterControlProfileCir sheMeterControlProfileCbs sheMeterControlProfilePir sheMeterControlProfilePbs sheMeterControlProfileDsCir sheMeterControlProfileDsCbs sheMeterControlProfileDsPir sheMeterControlProfileDsPbs sheMeterControlProfileDsShapingCir sheMeterControlProfileDsShapingCbs sheMeterControlProfileUseParametersrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.1 |
sheMeterControlIndexIndex of the configured table entry. Needed for modify or delete.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.2 |
sheMeterControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.3 |
sheMeterControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.4 |
sheMeterControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.5 |
sheMeterControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.6 |
sheMeterControlProfileNamelook at meterProfileTable... Spaces and other special characters (: o) are not allowed!!rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.7 |
sheMeterControlProfileCirlook at meterProfileTable...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.8 |
sheMeterControlProfileCbslook at meterProfileTable...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.9 |
sheMeterControlProfilePirlook at meterProfileTable...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.10 |
sheMeterControlProfilePbslook at meterProfileTable...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.11 |
sheMeterControlProfileDsCirlook at meterProfileTable...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.12 |
sheMeterControlProfileDsCbslook at meterProfileTable...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.13 |
sheMeterControlProfileDsPirlook at meterProfileTable...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.14 |
sheMeterControlProfileDsPbslook at meterProfileTable...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.15 |
sheMeterControlProfileUseParameterslook at tablerw SheMeterProfileUseParametersType .1.3.6.1.4.1.231.7.1.2.2.1.4.3.5.18 |
sheMeteringNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.3.6 |
sheMeteringProfileCreatedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.3.6.1 |
sheMeteringProfileModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.3.6.2 |
sheMeteringProfileDeletedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.3.6.3 |
sheRuleAndMeteringConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.3.100 |
sheUserFlowAndMeteringCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.1 |
sheUserFlowAndMeteringComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.1.1 |
sheUserFlowAndMeteringGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.2 |
sheRuleGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.2.1 |
sheMeteringGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.2.2 |
sheRuleControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.2.3 |
sheMeteringControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.2.4 |
sheRuleAndMeteringNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.3.100.2.5 |
sheFdb OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.4 |
sheFdbBase OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.4.1 |
sheFdbBaseAgeingTimeThe general ageing time for learned Mac-addresses.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.4.1.1 |
sheFdbBaseLearningUplinkThe global value that indicates whether to use a mac learning function for uplink.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.4.1.2 |
sheFdbTableThe forwarding data base table. New with R2.8 maintenance: This release introduces a new ControlRequest command for refresh of this table. Without calling this command, the table content will be static and not longer automatically updated. The refresh command could be used together with the vlanIndex, which is the first table index here. If a valid vlanIndex value was used, only the tableEntries with this vlanIndex as first key will be refreshed. If the vlanIndex is 0 or unknown the full table will be refreshed. SEQUENCE OF SheFdbEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.4.2 |
sheFdbEntryOne entry per learned mac-address per vlan. First key is the VlanIndex. SheFdbEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1 |
sheFdbIndexSecond key for fdb-table. Number of valid entrys is equal to number of current learned Mac-Addresses for vlan indeced by key 1.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.1 |
sheFdbMacAddressThe learned mac-address.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.2 |
sheFdbPortThat is the sheBridgePortIndex of the destination port.ro INTEGER .1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.3 |
sheFdbAgeTime this mac-address was learned.ro Unsigned32 UNITS "second" .1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.4 |
sheFdbStatusThe status of this entry. The meanings of the values are: other(1) : none of the following. invalid(2) : this entry is not longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed from the table. learned(3) : the value was learned, and is being used. self(4) : the value of the corresponding instance of FdbAclAddress represents one of the bridge's addresses. mgmt(5) : static(6) : the value was not learned but fixed configured by operatorro SheFdbStatusType .1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.5 |
sheFdbCpuPermitFrames have the permission to be send to control plane.ro ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.6 |
sheFdbPortPermitFrames have the permission to be send to data plane.ro ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.4.2.1.7 |
sheFdbControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.4.3 |
sheFdbControlRequestsetFdbBaseAgeingTime (401): sheFdbControlBaseAgeingTime setFdbBaseLearningUplink (402): sheFdbControlBaseLearningUplink New with R2.8 maintenance: refreshFdbTable (403): sheFdbControlIndex -> define the vlan for which the Fdb should be updated, Only supported by hiX5608 R1.3!! createFdbStaticEntry(404): sheFdbControlIndex -> define the vlan for which the FdbEntry should be created sheFdbControlPort -> define the bridgePort-Index for which the FdbEntry should be created sheFdbControlMacAddress -> define the used MacAddressrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.1 |
sheFdbControlIndexValue depends on the used ControlRequest.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.2 |
sheFdbControlStatusThe status of a user command. .ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.3 |
sheFdbControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.4 |
sheFdbControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.5 |
sheFdbControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.6 |
sheFdbControlBaseAgeingTimeThe values to be configured.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.7 |
sheFdbControlBaseLearningUplinkThe values to be configured. True : enable mac learning for uplink False : disable mac learning for uplinkrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.8 |
sheFdbControlPortDefine the bridgePort-Index for which the FdbEntry should be created/deleted. Value depends on the used ControlRequest. 0 used as wildcard for 'ALL' NOTE: No support by BFR2.0 of R2.8 56xx!! Only supported by 5608 R1.3!!rw Integer32 (0 | 1..65535) .1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.9 |
sheFdbControlMacAddressDefine the MacAddress for configuration or delete. Value depends on the used ControlRequest. NOTE: No support by BFR2.0 of R2.8 56xx!! Only supported by 5608 R1.3!!rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.4.3.10 |
sheFdbNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.4.4 |
sheFdbBaseAgeingTimeChangedConfiguration Notification NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.4.4.1 |
sheFdbBaseLearningUplinkChangedConfiguration Notification NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.4.4.2 |
sheFdbTableUpdatedFDB table update finished. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.4.4.3 |
sheFdbStaticMacCreatedstatic FDB table entry created NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.4.4.4 |
sheFdbConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.4.100 |
sheFdbCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.4.100.1 |
sheFdbComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.4.100.1.1 |
sheFdbGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.4.100.2 |
sheFdbBaseGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.4.100.2.1 |
sheFdbGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.4.100.2.2 |
sheFdbControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.4.100.2.3 |
sheFdbNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.4.100.2.4 |
sheLag OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.5 |
sheLagGroupTableContain allways two entrys for possible available Lag-Groups. SEQUENCE OF SheLagGroupEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1 |
sheLagGroupEntryOne entry for each possible lag-group. SheLagGroupEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1 |
sheLagGroupMacAddressA 6-octet read-only value carrying the individual MAC address assigned to the Aggregator.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.1 |
sheLagGroupActorSystemPriorityA 2-octet value indicating the priority value associated with the Actor's System ID.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.2 |
sheLagGroupActorSystemIdA 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.3 |
sheLagGroupAggregateOrIndividualA read-only Boolean value indicating whether the Aggregator represents an Aggregate ('TRUE') or an Individual link ('FALSE').ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.4 |
sheLagGroupActorAdminKeyThe current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. The meaning of particular Key values is of local significance.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.5 |
sheLagGroupActorOperKeyThe current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit, read-only value. The meaning of particular Key values is of local significance.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.6 |
sheLagGroupPartnerSystemIdA 6-octet read-only MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that there is no known Partner. If the aggregation is manually configured, this System ID value will be a value assigned by the local System.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.7 |
sheLagGroupPartnerSystemPriorityA 2-octet read-only value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.8 |
sheLagGroupPartnerOperKeyThe current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit, read-only value. If the aggregation is manually configured, this Key value will be a value assigned by the local System.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.9 |
sheLagGroupCollectorMaxDelayThe value of this 16-bit attribute defines the maximum delay, in tens of microseconds, that may be imposed by the Frame Collector between receiving a frame from an Aggregator Parser and either delivering the frame to its MAC Client or discarding the frame (see 43.2.3.1.1). Note: R2.8 will not longer accept any modification of this parameter and use always NE internal value.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.10 |
sheLagGroupLacpActivityThis attribute will enable or disable LACP-Activity for this Lag-Group.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.11 |
sheLagGroupMethodPossible values: srcmac(1), dstmac(2), xormac(3), srcip(4), dstip(5), xorip(6)ro SheLagMethodType .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.12 |
sheLagGroupPortListPortlist for all member's of this LAG. The octet string is a list of pairs of octets each identify an sheBridgePortIndex. The least significant byte is the second octet.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.13 |
sheLagGroupEntPhysicalIndexThis attribute describes the entPhysicalIndex of the card, where this LAG group is placed. Only LagPorts with identical entPhysicalIndex for the card could be added to a group. This information is given via: sheLagGroupPortList -> sheLagPortEntry -> sheBridgePortIndex -> sheSublayerIndex -> ifIndex -> shePhysPortEntPhysicalIndexro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.5.1.1.14 |
sheLagPortTableA table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port. For she, this table will contain allways 4 entrys. SEQUENCE OF SheLagPortEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2 |
sheLagPortEntryA list of Link Aggregation Control configuration parameters for each Aggregation Port on this device. SheLagPortEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1 |
sheLagPortActorSystemPriorityA 2-octet value used to define the priority value associated with the Actor's System ID.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.1 |
sheLagPortActorSystemIdA 6-octet read-only MAC address value that defines the value of the System ID for the System that contains this Aggregation Port.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.2 |
sheLagPortActorAdminKeyThe current administrative value of the Key for the Aggregation Port. This is a 16-bit, read-write value. The meaning of particular Key values is of local significance.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.3 |
sheLagPortActorOperKeyThe current operational value of the Key for the Aggregation Port. This is a 16-bit, read-only value. The meaning of particular Key values is of local significance.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.4 |
sheLagPortPartnerAdminSystemPriorityA 2-octet value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of PortPartnerAdminSystemID, PortPartnerAdminKey, PortPartnerAdminPort, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.5 |
sheLagPortPartnerOperSystemPriorityA 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in PortPartnerAdminSystemPriority if there is no protocol Partner.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.6 |
sheLagPortPartnerAdminSystemIdA 6-octet MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used, along with the value of PortPartnerAdminSystemPriority, PortPartnerAdminKey, PortPartnerAdminPort, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.7 |
sheLagPortPartnerOperSystemIdA 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in PortPartnerAdminSystemID if there is no protocol Partner.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.8 |
sheLagPortPartnerAdminKeyThe current administrative value of the Key for the protocol Partner. This is a 16-bit, read-write value. The assigned value is used, along with the value of PortPartnerAdminSystemPriority, PortPartnerAdminSystemID, PortPartnerAdminPort, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.9 |
sheLagPortPartnerOperKeyThe current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in PortPartnerAdminKey if there is no protocol Partner. This is a 16-bit, read-only value.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.10 |
sheLagPortSelectedAggIdThe identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregator, either because it is in the process of detaching from an Aggregator or because there is no suitable Aggregator available for it to select. This value is read-only.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.11 |
sheLagPortAttachedAggIdThe identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached to an Aggregator. This value is read-only.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.12 |
sheLagPortActorPortThe port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.13 |
sheLagPortActorPortPriorityThe priority value assigned to this Aggregation Port. This is a 2-octet value.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.14 |
sheLagPortPartnerAdminPortThe current administrative value of the port number for the protocol Partner. This is a 16-bit value. The assigned value is used, along with the value of PortPartnerAdminSystemPriority,PortPartnerAdminSystemID, PartnerAdminKey, and PortPartnerAdminPortPriority, in order to achieve manually configured aggregation.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.15 |
sheLagPortPartnerOperPortThe operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPort if there is no protocol Partner. This 16-bit value is read-only.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.16 |
sheLagPortPartnerAdminPortPriorityThe current administrative value of the port priority for the protocol Partner. This is a 16-bit value. The assigned value is used, along with the value of PortPartnerAdminSystemPriority, PortPartnerAdminSystemID, PortPartnerAdminKey, and PortPartnerAdminPort, in order to achieve manually configured aggregation.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.17 |
sheLagPortPartnerOperPortPriorityThe priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in PortPartnerAdminPortPriority if there is no.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.18 |
sheLagPortActorAdminStateA string of 8 bits, corresponding to the administrative values of Actor_State (43.4.2) as transmitted by the Actor in LACPDUs. The first bit of string corresponds to bit 7 (Expired). If TRUE (encoded as a 1), this flag indicates that the Actor's receive machine is in the EXPIRED state The second of string bit corresponds to bit 6 (Defaulted). If TRUE (encoded as a 1), this flag indicates that the Actor's receive machine is using Defaulted operational Partner information, administratively configured for the Partner. The third of string bit corresponds to bit 5 (Distributing). FALSE (encoded as a 0) means distribution of outgoing frames on this link is definitely disabled. The fourth of string bit corresponds to bit 4(Collecting). TRUE (encoded as a 1) means collection of incoming frames on this link is definitely enabled. The fifth of string bit corresponds to bit 3 (Synchronization). If FALSE (encoded as a 0), then this link is currently OUT_OF_SYNC, i.e., it is not in the right Aggregation. The sixth of string bit corresponds to bit 2 (Aggregation). If FALSE (encoded as a 0), the link is considered to be Individual, i.e., this link can be operated only as an individual link. The seventh of string bit corresponds to bit 1 (LACP_Timeout). Short Timeout is encoded as a 1; Long Timeout is encoded as a 0. The eighth of string bit corresponds to bit 0 of Actor_State (LACP_Activity). Active LACP is encoded as a 1; Passive LACP is encoded as a 0. The values of LACP_Activity,LACP_Timeout and Aggregation allow administrative control and could be set by controlgroup.ro SheLagStateType .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.19 |
sheLagPortActorOperStateA string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs.ro SheLagStateType .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.20 |
sheLagPortPartnerAdminStateA string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The assigned value is used in order to achieve manually configured aggregation.ro SheLagStateType .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.21 |
sheLagPortPartnerOperStateA string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. In the absence of an active protocol Partner, this value may reflect the manually configured value PortPartnerAdminState. This attribute value is read-only.ro SheLagStateType .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.22 |
sheLagPortAggregateOrIndividualA read-only Boolean value indicating whether the Aggregation Port is able to Aggregate ('TRUE') or is only able to operate as an Individual link ('FALSE').ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.23 |
sheLagPortLacpAvailabilityThis attribute indicates, if this port is available for lacp or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.5.2.1.24 |
sheLagControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3 |
sheLagControlRequestmodifyLagGroupEntry: sheLagControlIndex sheLagControlGroupActorSystemPriority sheLagControlGroupActorAdminKey sheLagControlGroupCollectorMaxDelay sheLagControlGroupLacpActivity sheLagControlGroupMethod modifyLagPortEntry: sheLagControlIndex sheLagControlPortActorAdminKey sheLagControlPortActorPortPriority sheLagControlPortActorAdminState sheLagControlPortLacpAvailability assignBridgePortToLag: sheLagControlIndex sheLagControlGroupPortList unassignBridgePortFromLag: sheLagControlIndex sheLagControlGroupPortListrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.1 |
sheLagControlIndexThe index of the table entry to be configured.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.2 |
sheLagControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.3 |
sheLagControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.4 |
sheLagControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.5 |
sheLagControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.6 |
sheLagControlGroupActorSystemPriorityLook at group-table description...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.7 |
sheLagControlGroupActorAdminKeyLook at group-table description...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.8 |
sheLagControlGroupCollectorMaxDelayLook at group-table description... Note: R2.8 will not longer use any modification of this parameter and use always NE internal value. A modification will be ignored.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.9 |
sheLagControlGroupPortListLook at group-table description...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.10 |
sheLagControlGroupLacpActivityLook at group-table description...rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.11 |
sheLagControlGroupMethodLook at group-table description...rw SheLagMethodType .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.12 |
sheLagControlPortActorAdminKeyLook at port-table description...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.13 |
sheLagControlPortActorPortPriorityLook at port-table description...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.14 |
sheLagControlPortActorAdminStateLook at port-table description...Only bit 0, 1 and 2 could be configured.rw SheLagStateType .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.15 |
sheLagControlPortLacpAvailabilityLook at port-table description...rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.5.3.16 |
sheLagNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.5.4 |
sheLagGroupEntryModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.5.4.1 |
sheLagPortEntryModifiedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.5.4.2 |
sheLagBridgePortAssignedLagGroup-Portlist changed notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.5.4.3 |
sheLagBridgePortUnassignedLagGroup-Portlist changed notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.5.4.4 |
sheLagConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.5.100 |
sheLagCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.5.100.1 |
sheLagComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.5.100.1.1 |
sheLagGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.5.100.2 |
sheLagGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.5.100.2.1 |
sheLagPortGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.5.100.2.2 |
sheLagControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.5.100.2.3 |
sheLagNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.5.100.2.4 |
sheDhcpRelay OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.6 |
sheDhcpBase OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.6.1 |
sheDhcpRelayAdminStateGlobaly enable/disable of Dhcp/PPPoE agent. Telegram handling for DHCP and PPPoE relay: valid telegrams are handled, invalid telegrams are dropped snoop: valid telegrams are forwarded, invalid telegrams are dropped bridge: valid telegrams are forwarded, invalid telegrams are forwarded (currently NO support) handling explanation: dhcpPppoeRelayRelay -> dhcp and Pppoe use mode relay dhcpPppoeRelaySnoop -> dhcp use mode relay and Pppoe use mode snoop valid values: up(1), -> releases >= R2.5 run now dhcpPppoeRelayRelay mode down(2), -> releases >= R2.5 run now dhcpPppoeSnoopSnoop mode dhcpPppoeRelayRelay(4), dhcpPppoeRelaySnoop(5), dhcpPppoeRelayBridge(6), (currently NO support) dhcpPppoeSnoopRelay(7), dhcpPppoeSnoopSnoop(8), dhcpPppoeSnoopBridge(9), (currently NO support) dhcpPppoeBridgeRelay(10),(currently NO support) dhcpPppoeBridgeSnoop(11),(currently NO support) dhcpPppoeBridgeBridge(12)(currently NO support) NOTE: Only release R2.5 and higher can accept new value's 4..12 depending on the state of implementation in NE.ro SheDhcpRelayAdminStateType .1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.1 |
sheDhcpRelayRemoteIdPer default it is the Mac-Address of the DSLAM (length is 6) to be identified for Option 82. Could be set by operator. Moved to sheBridgePortTable and sheBridgeBase. (obsolete)roobsolete OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.2 |
sheDhcpUseInnerTagForProtocolsThis configuration is only valid in double tagged mode. If enabled (true), the protocol machines for all DHCP providers will use the informations from inner tag of a received frame for evaluation, handling and forwarding. Per default always the outer tag will used. New with SHE R.8.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.3 |
shePppoeUseInnerTagForProtocolsThis configuration is only valid in double tagged mode. If enabled (true), the protocol machines for all PPPoE providers will use the informations from inner tag of a received frame for evaluation, handling and forwarding. Per default always the outer tag will used. New with SHE R.8.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.4 |
sheDhcpStationMoveEnabledThis parameter configure the feature 'station move' for service issues. If enabled, the NE will instantly release all DHCP session informations and possibly learned mac addresses for a certain subscriber line if a 'link down' event for this line was detected. If disabled, all release actions will be done according to FDB aging time and DHCP lease time configuration. New with R2.8.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.1.8 |
sheDhcpProviderTableThe dhcp/pppoe provider table. SEQUENCE OF SheDhcpProviderEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2 |
sheDhcpProviderEntryOne entry for each known dhcp or pppoe provider (depends on the option settings). SheDhcpProviderEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1 |
sheDhcpProviderIndexA table index.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.1 |
sheDhcpProviderNameDescriptional name. Spaces and other special characters (: o) are not allowed!!ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.2 |
sheDhcpServerIpAddress1There are three entrys and all three backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. NOTE: Four possible server ip's with R2.8 maintenance!!ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.3 |
sheDhcpServerIpAddress2There are three entrys and all three backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. NOTE: Four possible server ip's with R2.8 maintenance!!ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.4 |
sheDhcpServerIpAddress3There are three entrys and all three backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. NOTE: Four possible server ip's with R2.8 maintenance!!ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.5 |
sheDhcpServerGatewayThe gateway address of this dhcp provider. Not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent. Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable.roobsolete OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.6 |
sheDhcpVlanIdThat points to the VLAN, where the request should be send. A configuration is only in case of simplified DHCP agent possible. For PPPoE and normal DHCP providers the value of sheDhcpVlanId should be 0. That means, no provider vlan for received request's will be used! Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId.roobsolete Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.7 |
sheDhcpRelayAgentIpAddressThe relay agent IP address is used to set the GIADDR in DHCP messages. With R2.6, it can either be configured to an address that denotes a subscriber's subnet. If not set, the NE will automatically set to the IP of the interface which is used for sending DHCP message to DHCP server. In all cases, a configuration is not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.8 |
sheDhcpRelayAgentNetmaskThe RelayAgent Netmask. Not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent. Note: This parameter is not longer valid starting with release SHE R2.6. The IP interface configuration was moved to sheSystemIpHostTable.roobsolete OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.9 |
sheDhcpRelayAgentOptionOption 82, depends on the Dhcp - Server functionality. If PPPoE is configured also special Options could be implemented. With R2.7 additional options for LineProperty are possible (value 12..23).ro SheDhcpRelayAgentOptionType .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.10 |
sheDhcpCebsMacTranslationConfiguration whether CHADDR in a DHCP packet should be changed or not in CEBS environment. Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.11 |
sheDhcpRelayAgentMgmtConfiguration whether a dhcp provider should be used for mgmt-port relay or not. There can be only one dhcp-provider for mgmt-relay.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.12 |
sheDhcpInnerVlanIdThe index of inner-vlan when to forward Requests to the uplink. This vlan tag is used for the inner tag on double tagging mode. A configuration is only in case of simplified DHCP agent possible. For PPPoE and normal DHCP providers the value of sheDhcpVlanId should be 0. That means, no provider vlan for received request's will be used! Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId.roobsolete Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.13 |
sheDhcpBcastTranslationDsConfiguration whether destination address in a DHCP downstream packet should be changed or not. True - use always unicast address False - check broadcast flag from server and use unicast or broadcast address accordingly Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.14 |
sheDhcpLinePropertyNodeIdentifierThis parameter defines the name of the access node the DSLAM uses to identifies itself by the provider. New with R2.7.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.16 |
sheDhcpServerIpAddress4Now there are four entrys and all of them backup each other. Not necessary for all PPPoE relay agent options and in case of simplified Relay Agent. New with R2.8 maintenance.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.2.1.17 |
sheDhcpControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3 |
sheDhcpControlRequestsetDhcpAdminState: sheDhcpControlRelayAdminState Depending on the used RelayAgentOption value, not all values are needed. If a PPPoE or simplified option is used, only the values Name and AgentOption are mandatory. createDhcpProviderEntry: sheDhcpControlProfileName sheDhcpControlServerIpAddress1 sheDhcpControlServerIpAddress2 sheDhcpControlServerIpAddress3 sheDhcpControlServerGateway(obsolete) sheDhcpControlVlanId sheDhcpControlRelayAgentOption sheDhcpControlRelayAgentNetmask(obsolete) sheDhcpControlRelayAgentIpAddress sheDhcpControlCebsMacTranslation sheDhcpControlRelayAgentMgmt sheDhcpControlInnerVlanId sheDhcpControlBcastTranslationDs sheDhcpControlLinePropertyNodeIdentifier (new with R2.7) sheDhcpControlServerIpAddress4 (new with R2.8 maintenance) modifyDhcpProviderEntry: sheDhcpControlIndex sheDhcpControlServerIpAddress1 sheDhcpControlServerIpAddress2 sheDhcpControlServerIpAddress3 sheDhcpControlServerGateway(obsolete) sheDhcpControlVlanId sheDhcpControlRelayAgentNetmask(obsolete) sheDhcpControlRelayAgentIpAddress sheDhcpControlRelayAgentOption sheDhcpControlCebsMacTranslation sheDhcpControlRelayAgentMgmt sheDhcpControlInnerVlanId sheDhcpControlBcastTranslationDs sheDhcpControlLinePropertyNodeIdentifier (new with R2.7) sheDhcpControlServerIpAddress4 (new with R2.8 maintenance) deleteDhcpProviderEntry: sheDhcpControlIndex New with R2.8: setDhcpTagForProtocol: sheDhcpControlUseInnerTagForProtocols setDhcpStationMove: sheDhcpControlStationMoveEnabledrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.1 |
sheDhcpControlIndexThe table index to be configured.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.2 |
sheDhcpControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.3 |
sheDhcpControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.4 |
sheDhcpControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.5 |
sheDhcpControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.6 |
sheDhcpControlRelayAdminStateLook at base parameter description...rw SheDhcpRelayAdminStateType .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.7 |
sheDhcpControlRelayRemoteIdPer default it is the Mac-Address of the DSLAM (length is 6) to be identified for Option 82. Could be set by operator. (obsoleted in V135)rwobsolete OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.8 |
sheDhcpControlProviderNameLook at table description... Spaces and other special characters (: o) are not allowed!!rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.9 |
sheDhcpControlServerIpAddress1Look at table description...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.10 |
sheDhcpControlServerIpAddress2Look at table description...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.11 |
sheDhcpControlServerIpAddress3Look at table description...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.12 |
sheDhcpControlServerGatewayLook at table description... Note: A configuration of this parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.13 |
sheDhcpControlVlanIdLook at table description... Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId.rw Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.14 |
sheDhcpControlRelayAgentIpAddressThe relay agent IP address is used to set the GIADDR in DHCP messages. With R2.6, it can either be configured to an address that denotes a subscriber's subnet. If not set, the NE will automatically set to the IP of the interface which is used for sending DHCP message to DHCP server. In all cases, a configuration is not necessary for all PPPoE relay agent options and in case of simplified DHCP Relay Agent.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.15 |
sheDhcpControlRelayAgentNetmaskThe RelayAgent Netmask. Note: A configuration of this parameter is not longer supported starting with release SHE R2.6. The IP interface configuration was moved to sheSystemIpHostTable.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.16 |
sheDhcpControlRelayAgentOptionLook at table description... With R2.7 additional options for LineProperty are possible (value 12..23).rw SheDhcpRelayAgentOptionType .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.17 |
sheDhcpControlCebsMacTranslationconfiguration whether CHADDR in a DHCP packet should be changed or not in CEBS environment. Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.18 |
sheDhcpControlRelayAgentMgmtConfiguration whether a dhcp provider should be used for mgmt-port relay or not. There can be only one dhcp-provider for mgmt-relay.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.19 |
sheDhcpControlInnerVlanIdThe index of inner-vlan when to forward Dhcp Requests to the uplink. This vlan tag is used for the inner tag on double tagging mode. Only valid for simplified DHCP agent configuration. Look at table description. Note: This parameter is not longer supported starting with release SHE R2.6. The IP route configuration was moved to sheSystemIpRouteTable including a possible assignment of vlanId.rw Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.20 |
sheDhcpControlBcastTranslationDsConfiguration whether destination address in a DHCP downstream packet should be changed or not. True - use always unicast address False - check broadcast flag from server and use unicast or broadcast address accordingly Note: Only valid for DHCP provider configuration (check options) and should always false for PPPoE providers.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.21 |
sheDhcpControlUseInnerTagForProtocolsUsed for configuration of global DHCP and PPPoE useTag settings. BITS { dhcpUseInnerTagTrue(0), pppoeUseInnerTagTrue(1) } If bit is set to 1 the corresponding global parameter is set to true. Support with R2.8.rw SheDhcpUseTagForProtocolsType .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.22 |
sheDhcpControlLinePropertyNodeIdentifierThis parameter defines the name of the access node the DSLAM uses to identifies itself by the provider. New with R2.7.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.23 |
sheDhcpControlStationMoveEnabledThis parameter configure the feature 'station move' for service issues. If enabled, the NE will instantly release all DHCP session informations and possibly learned mac addresses for a certain subscriber line if a 'link down' event for this line was detected. If disabled, all release actions will be done according to FDB aging time and DHCP lease time configuration. New with R2.8.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.25 |
sheDhcpControlServerIpAddress4Look at table description...rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.6.3.26 |
sheDhcpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.6.5 |
sheDhcpProviderEntryCreatedA new dhcp provider table entry was created. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.1 |
sheDhcpProviderEntryModifiedA dhcp provider table entry was modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.2 |
sheDhcpProviderEntryDeletedA dhcp provider table entry was deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.3 |
sheDhcpRelayAdminStateModifiedThe dhcp relay admin state was modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.4 |
sheDhcpRelayOptionModifiedThe dhcp relay option was modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.5 |
sheDhcpRelayRemoteIdModifiedThe dhcp relay remote id was modified.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.6 |
sheDhcpFloodVlanIdAddedThe dhcp flood vlanid was added. It becomes obsolete. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.7 |
sheDhcpFloodVlanIdDeletedThe dhcp flood vlanid was deleted. It becomes obsolete. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.8 |
sheDhcpFloodVlanIdModifiedThe dhcp flood vlanid was modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.9 |
sheDhcpTagForProtocolsModifiedThe dhcp and pppoe global useTag options were modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.10 |
sheDhcpStationMoveEnableModifiedThe dhcp station move enable switch was modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.6.5.11 |
sheDhcpFloodVlanIdTableThe dhcp flood vlanid table. SEQUENCE OF SheDhcpFloodVlanIdEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.6.7 |
sheDhcpFloodVlanIdEntryOne entry for each dhcp flood vlanid. SheDhcpFloodVlanIdEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.6.7.1 |
sheDhcpFloodVlanIdIndex of that table. Will be identical to the used sheVlanIndex.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.6.7.1.1 |
sheDhcpFloodVlanEnabledEnable or disable a flooding vlan for DHCP packets. The default is false. New with R2.8: Flooding of DHCP or PPPoE packets could now be separatly enabled. The former command switch always both protocol types.ro SheDhcpFloodingType .1.3.6.1.4.1.231.7.1.2.2.1.4.6.7.1.2 |
sheDhcpFloodVlanIdControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.6.8 |
sheDhcpFloodVlanIdControlRequestsetDhcpFloodVlanId: sheDhcpFloodVlanIdControlVlanId sheDhcpFloodVlanIdControlVlanEnabledrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.1 |
sheDhcpFloodVlanIdControlStatusThe status of a control requestro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.2 |
sheDhcpFloodVlanIdControlTimerThe maximum wait time for the manager for a long running user command. The manager reads this value from the SHE.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.3 |
sheDhcpFloodVlanIdControlReqResultThe result of the last user commandro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.4 |
sheDhcpFloodVlanIdControlTimeStampThe time stamp of the last command (end of command)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.5 |
sheDhcpFloodVlanIdControlVlanIdVLAN ID which is controlled for Dhcp floodingrw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.6 |
sheDhcpFloodVlanIdControlVlanEnabledlook at table. Expanded with R2.8 maintenance.rw SheDhcpFloodingType .1.3.6.1.4.1.231.7.1.2.2.1.4.6.8.7 |
sheDhcpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.6.100 |
sheDhcpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.1 |
sheDhcpComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.1.1 |
sheDhcpRelayGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2 |
sheDhcpBaseGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.1 |
sheDhcpProviderGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.2 |
sheDhcpControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.3 |
sheDhcpNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.4 |
sheDhcpFloodVlanIdGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.5 |
sheDhcpFloodVlanIdControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.6 |
sheDhcpObsoleteGroupDescription.obsolete Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.7 |
sheDhcpObsoleteNotificationGroupDescription.obsolete Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.6.100.2.8 |
sheIgmp OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7 |
sheIgmpBase OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2 |
sheIgmpModeIGMP operation mode can be off proxy That is the general NE igmp on/off switch.ro SheIgmpModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.2 |
sheIgmpVersionThe version of IGMP which is running on this interface (detected by the NE). The NE uses version 2 as default. If version 1 members are detected on the IP subnet attached to this interface, the NE falls back to version 1. Note: This parameter is not longer supported starting with release SHE R2.8 The used version should be configured per IGMP profileVlan entry.roobsolete OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.3 |
sheIgmpMaxJoinedSubscriberThe maximum number of subscribers who can join a multicast group in the system. Note: This parameter is not longer supported starting with release SHE R2.6.roobsolete Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.4 |
sheIgmpMaxJoinedGroupThe maximum number of multicast groups that could be joined in the system.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.5 |
sheIgmpVlanTranslationModeConfigure VLAN translation mode for the system. 1 is inner tagged, 2 is outer tagged, default configuration is inner. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8.ro SheIgmpVlanMode .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.6 |
sheIgmpVlanDoubleTaggingModeConfigure provider VLAN tagging mode for the system, 1 is inner, 2 is outer, default configuration is outer. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8.ro SheIgmpVlanMode .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.7 |
sheIgmpDoubleTaggingControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9 |
sheIgmpDoubleTaggingControlRequestNew with SHE R.8. setIgmpTagMode: sheIgmpControlVlanTranslationMode sheIgmpControlVlanDoubleTaggingModerw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.1 |
sheIgmpDoubleTaggingControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.2 |
sheIgmpDoubleTaggingControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.3 |
sheIgmpDoubleTaggingControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.4 |
sheIgmpDoubleTaggingControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.5 |
sheIgmpControlVlanTranslationModeConfigure VLAN translation mode for the system, 1 is inner tagged, 2 is outer tagged, default configuration is inner. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8.rw SheIgmpVlanMode .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.6 |
sheIgmpControlVlanDoubleTaggingModeConfigure provider VLAN tagging mode for the system, 1 is inner, 2 is outer, default configuration is outer. This configuration is only functions when system is configured in double tagging mode. New with SHE R.8.rw SheIgmpVlanMode .1.3.6.1.4.1.231.7.1.2.2.1.4.7.2.9.7 |
sheIgmpProfileTableThe table has one provider entry. It contains the provider VLAN and the host and querier settings. SEQUENCE OF SheIgmpProfileEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5 |
sheIgmpProfileEntryIn first release we will only support one table entry. SheIgmpProfileEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1 |
sheIgmpProviderIndexA table Index.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.1 |
sheIgmpProviderProfileNameName for easy profile handling. Spaces and other special characters (: o) are not allowed!!ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.2 |
sheIgmpProviderProxyIpAddressThe source IP address used by the IGMP proxy for join and leave messages in upstream direction and for queries in downstream direction.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.3 |
sheIgmpProviderRobustnessThe Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. The Robustness Variable MUST NOT be zero, and SHOULD NOT be one.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.4 |
sheIgmpProviderQueryIntervalThe frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.5 |
sheIgmpProviderQueryResponseIntervalThe Max Response Time inserted into the periodic General Queries. When the subscriber host doesn't respond to IGMP query messages, it is unsubscribed from the multicast group. It must be less than the Query Interval.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.6 |
sheIgmpProviderStartupQueryIntervalThe startup frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.7 |
sheIgmpProviderStartupQueryCountThe Startup Query Count is the number of Queries sent out on startup, separated by the Startup Query Interval.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.8 |
sheIgmpProviderLastMemberQueryIntervalThe Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if igmpInterfaceVersion is 1.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.9 |
sheIgmpProviderLastMemberQueryCountThe Last Member Query Count is the number of Group-Specific Queries sent before the router assumes there are no local members.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.10 |
sheIgmpProviderImmediateLeaveIf immediate leave is disabled and the client sends a leave message, the switch sends a query message to the client. When there is no response from the client, it is deleted from the multicast group. If immediate leave is enabled, the client is deleted from the multicast group when the switch receives the leave message. Note: Not longer configurable with R2.8.ro ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.11 |
sheIgmpProviderUnsolicitedReportIntervalThe Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group (upstream).ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.12 |
sheIgmpProviderVersion1RouterTimeoutThe Version 1 Router Present Timeout is how long a host must wait after hearing a Version 1 Query before it may send any IGMPv2 messages. The time until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is loaded to a timer. While the timer is running, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface. With R2.8 and support of IGMPv3 these attribute means OlderVersionRouterTimeout.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.13 |
sheIgmpProviderVersion1RouterPresentTimeoutThe time remaining until a host will assume that there are no longer any IGMP version 1 routers on the IP subnet attached to this interface. Upon hearing any Version 1 Query, this value is reset to the group membership timer. While this time remaining is non-zero, it may not send any IGMPv2 messages. The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is reset to the group membership timer. While this time remaining is non-zero, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface. With R2.8 and support of IGMPv3 these attribute means OlderVersionRouterPresentTimeout.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.14 |
sheIgmpProviderVlanMulticastLimitationConfigures all possible multicast addresses for IGMP on a per VLAN basis. This parameter indicates whether this IGMP provider have the limitation on the multicast group/packages or not. Value can be true(1) or false(2). False means all subscriber can join all multicast streams through to this whole VLAN if they are member of this vlan (unlimited access). True is the default state and means only configured groups/packages could be joined (limited access).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.15 |
sheIgmpProviderMcastBandwithLimitThis is the configured multicast bandwith limitation per provider. The value 65535 (0xFFFF) is a special value and means unlimited access for this provider (switch off feature AC - admission control - default). New parameter with SHE R2.8.ro Unsigned32 (0..10000 | 65535) UNITS "100 kbps" .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.16 |
sheIgmpProviderDefaultChannelBandwithThis parameter has a range of 0..500 representing the default channel bandwith with a granularity of 100kBits. When a non-premium channel is registered, its channel bandwidth will adopt the default bandwith. New parameter with SHE R2.8ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.5.1.17 |
sheIgmpProfileControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6 |
sheIgmpProviderControlRequestsetIgmpMode: sheIgmpProviderControlMode setIgmpMaxJoinedSubscribers: (Note: Not longer supported starting with release SHE R2.6.) sheIgmpProviderControlMaxJoinedSubscribers setIgmpMaxJoinedGroup: sheIgmpProviderControlMaxJoinedGroup createIgmpProviderEntry: sheIgmpProviderControlProfileName sheIgmpProviderControlProxyIpAddress sheIgmpProviderControlRoboustness sheIgmpProviderControlQueryInterval sheIgmpProviderControlQueryResponseInterval sheIgmpProviderControlStartupQueryInterval sheIgmpProviderControlStartupQueryCount sheIgmpProviderControlLastMemberQueryInterval sheIgmpProviderControlLastMemberQueryCount sheIgmpProviderControlImmediateLeave sheIgmpProviderControlUnsolicitedReportInterval sheIgmpProviderControlVersion1RouterTimeout sheIgmpProviderControlVlanMulticastLimitation modifyIgmpProviderEntry: sheIgmpProviderControlIndex sheIgmpProviderControlProfileName sheIgmpProviderControlProxyIpAddress sheIgmpProviderControlRoboustness sheIgmpProviderControlQueryInterval sheIgmpProviderControlQueryResponseInterval sheIgmpProviderControlStartupQueryInterval sheIgmpProviderControlStartupQueryCount sheIgmpProviderControlLastMemberQueryInterval sheIgmpProviderControlLastMemberQueryCount sheIgmpProviderControlImmediateLeave sheIgmpProviderControlUnsolicitedReportInterval sheIgmpProviderControlVersion1RouterTimeout sheIgmpProviderControlVlanMulticastLimitation deleteIgmpProviderEntry: sheIgmpProviderControlIndex New with SHE R2.8: setIgmpProviderChannelAdmission (743): sheIgmpProviderControlIndex sheIgmpProviderControlMcastBandwithLimit sheIgmpProviderControlDefaultChannelBandwithrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.1 |
sheIgmpProviderControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.2 |
sheIgmpProviderControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.3 |
sheIgmpProviderControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.4 |
sheIgmpProviderControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.5 |
sheIgmpProviderControlIndexindex of sheIgmpProviderTable parameter for - modifyIgmpProviderEntry - deleteIgmpProviderEntry - setIgmpProviderEntrySourceListrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.6 |
sheIgmpProviderControlModeIGMP operation mode can be off proxy parameter for - setIgmpMode That is the general NE igmp on/off switch.rw SheIgmpModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.7 |
sheIgmpProviderControlProfileNameName for easy profile handling. Spaces and other special characters (: o) are not allowed!! parameter for - createIgmpProviderEntry - modifyIgmpProviderEntryrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.8 |
sheIgmpProviderControlProxyIpAddressThe source IP address used by the IGMP proxy for join and leave messages in upstream direction and for queries in downstream direction. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntryrw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.9 |
sheIgmpProviderControlRobustnessThe Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. The Robustness Variable MUST NOT be zero, and SHOULD NOT be one. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.10 |
sheIgmpProviderControlQueryIntervalThe frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.11 |
sheIgmpProviderControlQueryResponseIntervalThe Max Response Time inserted into the periodic General Queries. When the subscriber host doesn't respond to IGMP query messages, it is unsubscribed from the multicast group. It must be less than the Query Interval. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.12 |
sheIgmpProviderControlStartupQueryIntervalThe startup frequency at which IGMP Host-Query packets (downstream) are transmitted on this interface. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.13 |
sheIgmpProviderControlStartupQueryCountThe Startup Query Count is the number of Queries sent out on startup, separated by the Startup Query Interval. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.14 |
sheIgmpProviderControlLastMemberQueryIntervalThe Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if igmpInterfaceVersion is 1. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.15 |
sheIgmpProviderControlLastMemberQueryCountThe Last Member Query Count is the number of Group-Specific Queries sent before the router assumes there are no local members. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.16 |
sheIgmpProviderControlImmediateLeaveIf immediate leave is disabled and the client sends a leave message, the switch sends a query message to the client. When there is no response from the client, it is deleted from the multicast group. If immediate leave is enabled, the client is deleted from the multicast group when the switch receives the leave message. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry Note: Not longer configurable with R2.8.rw ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.17 |
sheIgmpProviderControlUnsolicitedReportIntervalThe Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group (upstream). parameter for - createIgmpProviderEntry - modifyIgmpProviderEntryrw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.18 |
sheIgmpProviderControlVersion1RouterTimeoutThe Version 1 Router Present Timeout is how long a host must wait after hearing a Version 1 Query before it may send any IGMPv2 messages. The time until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is loaded to a timer. While the timer is running, the local router ignores any IGMPv2 Leave messages for this group that it receives on this interface. parameter for - createIgmpProviderEntry - modifyIgmpProviderEntry With R2.8 and support of IGMPv3 these attribute means OlderVersionRouterTimeout.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.19 |
sheIgmpProviderControlMaxJoinedSubscriberThe maximum number of joined subscribers in the system. Note: This parameter is not longer supported starting with release SHE R2.6.rwobsolete Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.20 |
sheIgmpProviderControlMaxJoinedGroupThe maximum number of multicast groups that could be joined in the system.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.21 |
sheIgmpProviderControlVlanMulticastLimitationtrue(1),false(2) look at tablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.22 |
sheIgmpProviderControlMcastBandwithLimitThis is the configured multicast bandwith limitation per provider. The value 655353 (0xFFFF) is a special value and means unlimited access for this provider (switch off feature AC - admission control). New parameter with SHE R2.8.rw Unsigned32 (0..10000 | 65535) UNITS "100 kbps" .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.23 |
sheIgmpProviderControlDefaultChannelBandwithThis parameter has a range of 0..500 representing the default channel bandwith with a granularity of 100kBits. When a non-premium channel is registered, its channel bandwidth will adopt the default bandwith. New parameter with SHE R2.8rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.6.24 |
sheIgmpProfileVlanTableThe table assigns a VLANs for multicast traffic to multicast provider profiles. Both a Vlan and a profile can be assigned only once. SEQUENCE OF SheIgmpProfileVlanEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7 |
sheIgmpProfileVlanEntryA table entry assigns a VLAN for multicast traffic to a multicast provider profile. Both a Vlan and a profile can be assigned only once. SheIgmpProfileVlanEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1 |
sheIgmpProfileVlanVlanIdThe provider specific Vlan for multicast traffic. The sheVlanIndex for that Vlan.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.2 |
sheIgmpProfileVlanMcastEgressPortsList of all fully configured subscriber ports of this multicast VLAN. The list is updated whenever any part of the chain bridgePort->MCastPackage->IgmpGroup changes. The octet string is a list of pairs of octets each identifying an sheBridgePortIndex. The least significant byte is the second octet.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.3 |
sheIgmpProfileVlanInnerVlanIdAn inner vlanid for this igmp provider vlan. It is used in double tagging mode when sending IGMP packets to uplink. It is useless besides double tagging mode and could be 0 in that case.ro Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.4 |
sheIgmpProfileVlanDot1pPriorityThe priority of an IGMP query that is inserted in vlan tag when a querier sends it to subscribers.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.5 |
sheIgmpProfileVlanDot1pReportPriorityThe priority of an IGMP report that is inserted in vlan tag when a host sends it to router.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.6 |
sheIgmpProfileVlanDot1pInnerPriorityThe inner priority of an IGMP query that is inserted in inner vlan tag when a querier sends a query to subscribers. This attribute is used only for double tagging mode.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.7 |
sheIgmpProfileVlanDot1pInnerReportPriorityThe priority of an IGMP report that is inserted in inner vlan tag when a host sends a report to router. This attribute is used only for double tagging mode.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.8 |
sheIgmpProfileVlanForkingModeIGMP forking function enabled will send the original IGMP messages with actual MAC address of the clients (e.g. STB) and the corresponding/preserved customer VLAN ID towards the BRAS/Edge Router regardless of IGMP proxy configuration/operation. Possible values: noForking(0), ipoeForking(1), pppoeForking(2)ro SheIgmpProfileVlanForkingModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.9 |
sheIgmpProfileVlanOuterVlanIdAn outer vlanid for this igmp provider vlan. It is used in double tagging mode when sending IGMP packets to uplink. It is useless besides double tagging mode and could be 0 in that case. New with R2.8.ro Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.10 |
sheIgmpProfileVlanVersionConfigure the supported IGMP version for that provider specific vlan. IGMP frames of wrong version should be silently discarded. New parameter with SHE R2.8ro SheIgmpVersionType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.11 |
sheIgmpProfileVlanASMStatusIgmp provider ASM (any source multicast)status. When enabled, any source multicast is allowed for the provider, when disabled, any source multicast is not permitted for the provider. Default value is Enable. New parameter with SHE R2.8ro SheIgmpProviderASM .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.12 |
sheIgmpProfileVlanCxUSnoopingStateIt indicates whether IGMP CXU snooping mode is enabled on provider. Value 0 is disable; value 1 is enable. Default value is disable. New parameter with SHE R2.8ro SheIgmpProviderVlanCxuSnoopingState .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.13 |
sheIgmpProfileVlanDefaultSourceIdListThis parameter contains a list of indeces which points to valid entries of the sheIgmpSourceIpAddressTable. Each octet represents one index value. The list could be empty (default). If the configured sheIgmpMcastChannelSourceId of related group's points to index with IP address 0.0.0.0 (wildcard configuration, ASM), any IGMP report message in network direction is sent as IGMv3 ASM report. If the defaultList contains entries pointing to other non-zero IP-addresses, those (all of them) are used to generate an IGMPv3 SSM report packet in network direction. In case of IGMP provider mode IGMPv3 or IGMPv3Compatible the default IP list is checked with channel as key for any received ASM packet to determine the transmission mode (ASM,SSM) and source address for packets sent in network direction. This configuration is not valid for IGMPv2 provider mode. This configuration here will be outvoted by a similar configuration for the related IgmpGroup. New parameter with SHE R2.8 maintenance.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.7.1.14 |
sheIgmpProfileVlanControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8 |
sheIgmpProfileVlanControlRequestcreateIgmpProfileVlanEntry: - sheIgmpProfileVlanControlIndex - sheIgmpProfileVlanControlVlanId - sheIgmpProfileVlanControlDot1pPriority - sheIgmpProfileVlanControlDot1pReportPriority - sheIgmpProfileVlanControlDot1pInnerPriority - sheIgmpProfileVlanControlDot1pReportInnerPriority - sheIgmpProfileVlanControlInnerVlanId - sheIgmpProfileVlanControlOuterVlanId (new with R2.8) - sheIgmpProfileVlanControlVersion (new with R2.8) - sheIgmpProfileVlanControlASMStatus (new with R2.8) - sheIgmpProfileVlanControlCxuSnoopingState (new with R2.8) - sheIgmpProfileVlanControlDefaultSourceIdList (new with R2.8 maintenance) deleteIgmpProfileVlanEntry: - sheIgmpProfileVlanControlIndex modifyIgmpProfileVlanDot1p: - sheIgmpProfileVlanControlIndex - sheIgmpProfileVlanControlDot1pPriority - sheIgmpProfileVlanControlDot1pReportPriority - sheIgmpProfileVlanControlDot1pInnerPriority - sheIgmpProfileVlanControlDot1pReportInnerPriority - sheIgmpProfileVlanControlInnerVlanId - sheIgmpProfileVlanControlOuterVlanId (new with R2.8) - sheIgmpProfileVlanControlVersion (new with R2.8) - sheIgmpProfileVlanControlASMStatus (new with R2.8) - sheIgmpProfileVlanControlCxuSnoopingState (new with R2.8) - sheIgmpProfileVlanControlDefaultSourceIdList (new with R2.8 maintenance) R2.4 only modifyIgmpProfileVlanForkingMode: - sheIgmpProfileVlanControlIndex - sheIgmpProfileVlanControlForkingModerw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.1 |
sheIgmpProfileVlanControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.2 |
sheIgmpProfileVlanControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.3 |
sheIgmpProfileVlanControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.4 |
sheIgmpProfileVlanControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.5 |
sheIgmpProfileVlanControlIndexThe index sheIgmpProviderIndex of the provider specific multicast profile. parameter for - createIgmpProfileVlanEntry - deleteIgmpProfileVlanEntryrw Unsigned32 (1) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.6 |
sheIgmpProfileVlanControlVlanIdThe provider specific Vlan for multicast traffic. The sheVlanIndex for that Vlan. parameter for - deleteIgmpProfileVlanEntryrw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.7 |
sheIgmpProfileVlanControlInnerVlanIdAn inner vlanid for this igmp provider vlan or 0 if not used.rw Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.8 |
sheIgmpProfileVlanControlDot1pPriorityThe priority of an IGMP query that is inserted in vlan tag when a querier sends it to subscribers.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.9 |
sheIgmpProfileVlanControlDot1pReportPriorityThe priority of an IGMP report that is inserted in vlan tag when a host sends it to router.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.10 |
sheIgmpProfileVlanControlDot1pInnerPriorityThe inner priority of an IGMP query that is inserted in inner vlan tag when a querier sends a query to subscribers. This attribute is used only for double tagging mode.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.11 |
sheIgmpProfileVlanControlDot1pInnerReportPriorityThe priority of an IGMP report that is inserted in inner vlan tag when a host sends a report to router. This attribute is used only for double tagging mode.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.12 |
sheIgmpProfileVlanControlForkingModeWhen it's set to 0, it means no forking, when set to 1 it means forking mode is IPoE forking, when set to 2, PPPoE forking is used for the providerrw SheIgmpProfileVlanForkingModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.13 |
sheIgmpProfileVlanControlOuterVlanIdAn outer vlanid for this igmp provider vlan or 0 if not used.rw Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.14 |
sheIgmpProviderControlVersionConfigure the supported IGMP version for that provider specific vlan. IGMP frames of wrong version should be silently discarded. New parameter with SHE R2.8.rw SheIgmpVersionType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.15 |
sheIgmpProviderControlASMStatusIgmp provider ASM (any source multicast)status. When enabled, any source multicast is allowed for the provider, when disabled, any source multicast is not permitted for the provider. Default value is Enable. parameter for - createIgmpProfileVlanEntry: - modifyIgmpProfileVlanDot1p: New parameter with SHE R2.8.rw SheIgmpProviderASM .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.16 |
sheIgmpProfileVlanControlCxUSnoopingStateIt indicates whether IGMP CXU snooping mode is enabled on provider. Value 0 is disable; value 1 is enable. parameter for - createIgmpProfileVlanEntry: - modifyIgmpProfileVlanDot1p: New parameter with SHE R2.8.rw SheIgmpProviderVlanCxuSnoopingState .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.17 |
sheIgmpProfileVlanControlDefaultSourceIdListlook at table New parameter with SHE R2.8 maintenance.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.8.18 |
sheIgmpGroupTableThe table contains entries for multicast groups. A group has a specific multicast address, belongs to a provider and to a multicast group package. SEQUENCE OF SheIgmpGroupEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9 |
sheIgmpGroupEntryOne entry for each Igmp-Group. If IGMPv3 is running, each table entry represent a single channel configuration. SheIgmpGroupEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1 |
sheIgmpGroupIndexA table Index.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.1 |
sheIgmpGroupIpAddressThe used Multicast IP-Address. If these Address is set to 00000000, it should work as a * wildcard configuration, it means an any group (S,*) channel.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.2 |
sheIgmpGroupNameA unique name for this multicast group. Spaces and other special characters (: o) are not allowed!!ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.3 |
sheIgmpGroupProviderIdThat is the index of the corresponding sheIgmpProviderTable entry.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.4 |
sheIgmpGroupMcastGroupPackageListThat is a list of available corresponding indices of the sheIgmpMcastGroupPackageTable where this group is a member. Each index has 16 bit. The least significant byte is the second octet.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.5 |
sheIgmpGroupJoinedPortsListList of subscribers currently subscribing this multicast group. The octet string is a list of pairs of octets each identifying an sheBridgePortIndex. The least significant byte is the second octet. A change in this list will not be reported by a trap.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.6 |
sheIgmpGroupLastMembershipReportTime since the last membership report has been sent upstream by the proxy for this multicast group.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.7 |
sheIgmpGroupLastLeaveMessageTime since the last leave group message has been sent upstream by the proxy for this multicast group.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.8 |
sheIgmpGroupSuppliedCardListList of entPhysIndices currently receiving data of this multicast group. The octet string is a list of pairs of octets each identifying an entPhysIndex for that card. The least significant byte is the second octet. A change in this list will not be reported by a trap.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.9 |
sheIgmpGroupIsStaticEnable or disable static multicast group configuration.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.10 |
sheIgmpMcastChannelSourceIdThis is a index which points to valid entry of the sheIgmpSourceIpAddressTable. If the source IP of the index is 0.0.0.0 (default), it should work as a '*' wildcard configuration and no restriction of possible source ip addresses are made (*,G). In case of IGMP mode iGMPv3 or iGMPv3Compatible ASM will be used. This setting is also valid for mode iGMPv2 usage. The configuration of other source IP's is only valid if iGMPv3 or iGMPv3Compatible mode is running. New parameter with SHE R2.8.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.11 |
sheIgmpMcastChannelBandwithThe bandwith of this channel, with a range of 0..500 representing the bandwith with a granularity of 100kBits. New parameter with SHE R2.8.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.12 |
sheIgmpMcastChannelDefaultSourceIdListThis parameter contains a list of indeces which points to valid entries of the sheIgmpSourceIpAddressTable. Each octet represents one index value. The list could be empty (default). If the configured sheIgmpMcastChannelSourceId of these group points to index with IP address 0.0.0.0 (wildcard configuration, ASM), any IGMP report message in network direction is sent as IGMv3 ASM report. If the defaultList contains entries pointing to other non-zero IP-addresses, those (all of them) are used to generate an IGMPv3 SSM report packet in network direction. In case of IGMP provider mode IGMPv3 or IGMPv3Compatible the default IP list is checked with channel as key for any received ASM packet to determine the transmission mode (ASM,SSM) and source address for packets sent in network direction. This configuration is not valid for IGMPv2 provider mode. This configuration here will outvote a similar configuration for the corresponding IgmpProvider. New parameter with SHE R2.8 maintenance.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.9.1.13 |
sheIgmpGroupControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10 |
sheIgmpGroupControlRequestcreateIgmpGroupEntry: sheIgmpGroupControlIpAddress sheIgmpGroupControlName sheIgmpGroupControlProviderId sheIgmpGroupControlMcastGroupPackageList sheIgmpGroupControlIsStatic sheIgmpMcastChannelControlSourceId (new with R2.8) sheIgmpMcastChannelControlDefaultSourceIdList (new with R2.8 maintenance) modifyIgmpGroupEntry: sheIgmpGroupControlIndex sheIgmpGroupControlIpAddress sheIgmpGroupControlName sheIgmpGroupControlMcastGroupPackageList sheIgmpGroupControlIsStatic sheIgmpMcastChannelControlSourceId (new with R2.8) sheIgmpMcastChannelControlDefaultSourceIdList (new with R2.8 maintenance) deleteIgmpGroupEntry: sheIgmpGroupControlIndex New with SHE R2.8: setIgmpMcastChannelParameter: sheIgmpGroupControlIndex sheIgmpMcastChannelControlBandwithrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.1 |
sheIgmpGroupControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.2 |
sheIgmpGroupControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.3 |
sheIgmpGroupControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.4 |
sheIgmpGroupControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.5 |
sheIgmpGroupControlIndexThe index of the sheIgmpGroupEntry to be modified. parameter for - modifyIgmpGroupEntry - deleteIgmpGroupEntryrw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.6 |
sheIgmpGroupControlIpAddressThe used Multicast IP-Address. parameter for - createIgmpGroupEntry - modifyIgmpGroupEntry If these Address is set to 00000000, it should work as a * wildcard configuration.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.7 |
sheIgmpGroupControlNameA unique name for this multicast group. Spaces and other special characters (: o) are not allowed!! parameter for - createIgmpGroupEntry - modifyIgmpGroupEntryrw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.8 |
sheIgmpGroupControlProviderIdThat is the index of the corresponding sheIgmpProviderTable entry. parameter for - createIgmpGroupEntryrw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.9 |
sheIgmpGroupControlMcastGroupPackageListThat is a list of available corresponding indices of the sheIgmpMcastGroupPackageTable where this group is a member. Each index has 16 bit. parameter for - createIgmpGroupEntry - modifyIgmpGroupEntryrw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.10 |
sheIgmpGroupControlIsStaticEnable or disable static multicast group configuration.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.11 |
sheIgmpMcastChannelControlSourceIdlook at table. New parameter with SHE R2.8.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.12 |
sheIgmpMcastChannelControlBandwithlook at table. parameter for: -setIgmpMcastChannelParameter: New parameter with SHE R2.8.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.13 |
sheIgmpMcastChannelControlDefaultSourceIdListlook at table New parameter with SHE R2.8 maintenance.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.10.14 |
sheIgmpMcastGroupPackageTableThe table contains entry's they combines multicast groups to a multicast group package. SEQUENCE OF SheIgmpMcastGroupPackageEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.11 |
sheIgmpMcastGroupPackageEntryOne entry for each multicast group package. SheIgmpMcastGroupPackageEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.11.1 |
sheIgmpMcastGroupPackageIndexIndex of the package-table.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.11.1.1 |
sheIgmpMcastGroupPackageNameThat should be a descriptional name. Spaces and other special characters (: o) are not allowed!!ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.11.1.2 |
sheIgmpMcastGroupPackageGroupListThat is a list of pairs of octets each identifying a corresponding index of the sheIgmpGroupTable. It shows the groups that are members of the package. The list is updated by the NE when the package list of a group is modified. The least significant byte is the second octet.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.11.1.3 |
sheIgmpMcastGroupPackageControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.12 |
sheIgmpMcastGroupPackageControlRequestcreateIgmpMcastGroupPackage: sheIgmpMcastGroupPackageControlName deleteIgmpMcastGroupPackage: sheIgmpMcastGroupPackageControlIndexrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.1 |
sheIgmpMcastGroupPackageControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.2 |
sheIgmpMcastGroupPackageControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.3 |
sheIgmpMcastGroupPackageControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.4 |
sheIgmpMcastGroupPackageControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.5 |
sheIgmpMcastGroupPackageControlIndexA table index.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.6 |
sheIgmpMcastGroupPackageControlNameThat should be a descriptional name. Spaces and other special characters (: o) are not allowed!! parameter for - createIgmpMcastGroupPackagerw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.12.7 |
sheIgmpPortGroupsTableFor the subscriber bridge ports (first table index is sheBridgePortIndex) the table has entries for all multicast groups a port has currently joined. Because IgmpV3 allow the configuration of wildcard's for used multicast and/or source IP address, R2.8 maintenance modify the second table index to a free running index and add parameter to show the used multicast IP address. SEQUENCE OF SheIgmpPortGroupsEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.13 |
sheIgmpPortGroupsEntryIf IGMPv3 is running, it represent a joined channel! SheIgmpPortGroupsEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1 |
sheIgmpPortGroupsStpIpAddressThe IP address of the subsribers host (set top box) that has joined the multicast group. Each Ip address is a set of 4 octets. Expanded with R2.8: If Igmpv3 is running up to five boxes could be listed here.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.1 |
sheIgmpPortGroupsTimeFirstMembRepThe time when the first membership report for the joined multicast group has been received from the subscriber. Note: Set to obsolete with R2.8 - no valid information could be returned!roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.2 |
sheIgmpPortGroupsTimeLastMembRepThe time when the last membership report for the joined multicast group has been received from the subscriber.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.3 |
sheIgmpPortGroupsFiltermodeThis parameter may be either INCLUDE or EXCLUDE. In INCLUDE mode, reception of packets sent to the specified multicast address is requested *only* from those IP source address listed in the source-id parameter. In EXCLUDE mode, reception of packets sent to the given multicast address is requested from all IP source addresses *except* those listed in the source-id parameter. New parameter with SHE R2.8 and only valid for IGMPv3.ro SheIgmpPortGroupsFiltermodeType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.4 |
sheIgmpPortGroupsSourceIdThis is an IP unicast addresses from which multicast reception is desired or not desired, depending on the filter mode. IP address entry consist of 4 Octets and should be a subset or identical to the corresponding sheIgmpMcastChannelSourceId of the joined group. New parameter with SHE R2.8 and only valid for IGMPv3.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.5 |
sheIgmpPortGroupsIpAddressThe used Multicast IP-Address of the joined group. New parameter with SHE R2.8 maintenance.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.6 |
sheIgmpPortGroupsIndexThe new second tableIndex starting with R2.8 maintenance. It is a free running Index which show the amount of actual joined groups by this subscriber.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.13.1.7 |
sheIgmpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14 |
sheIgmpModeModifiedThe general IGMP operation mode has been modified by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.1 |
sheIgmpProfileEntryCreatedA new entry in the sheIgmpProfileTable has been created by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.2 |
sheIgmpProfileEntryModifiedAn entry in the sheIgmpProfileTable has been modified by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.3 |
sheIgmpProfileEntryDeletedAn entry in the sheIgmpProfileTable has been deleted by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.4 |
sheIgmpProfileControlResultNotification of port command ending and result in case of long running command. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.5 |
sheIgmpProfileVlanEntryCreatedA new entry in the sheIgmpProfileVlanTable has been created by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.6 |
sheIgmpProfileVlanEntryModifiedAn entry in the sheIgmpProfileVlanTable has been modified by the NE. The sheIgmpProfileVlanMcastEgressPorts has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.7 |
sheIgmpProfileVlanEntryDeletedAn entry in the sheIgmpProfileVlanTable has been deleted by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.8 |
sheIgmpProfileVlanControlResultNotification of port command ending and result in case of long running command. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.9 |
sheIgmpGroupEntryCreatedA new entry in the sheIgmpGroupTable has been created by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.10 |
sheIgmpGroupEntryModifiedAn entry in the sheIgmpGroupTable has been modified by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.11 |
sheIgmpGroupEntryDeletedAn entry in the sheIgmpGroupTable has been deleted by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.12 |
sheIgmpGroupControlResultNotification of port command ending and result in case of long running command. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.13 |
sheIgmpMcastGroupPackageEntryCreatedAn entry in the sheIgmpMcastGroupPackageTable has been created by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.14 |
sheIgmpMcastGroupPackageEntryModifiedAn entry in the sheIgmpMcastGroupPackageTable has been modified by the NE. The sheIgmpMcastGroupPackageGroupList has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.15 |
sheIgmpMcastGroupPackageEntryDeletedAn entry in the sheIgmpMcastGroupPackageTable has been deleted by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.16 |
sheIgmpMcastGroupPackageControlResultNotification of port command ending and result in case of long running command. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.17 |
sheIgmpMaxJoinedSubscriberModifiedThe general IGMP MaxJoinedSubscriber-Value has been modified by the operator. Note: This parameter is not longer supported starting with release SHE R2.6.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.18 |
sheIgmpFloodVlanCreatedAn entry in the sheIgmpFloodVlanTable was created by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.19 |
sheIgmpFloodVlanDeletedAn entry in the sheIgmpFloodVlanTable was deleted by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.20 |
sheIgmpProfileVlanDot1pModifiedAn entry of Dot1p in the sheIgmpProfileVlanTable has been modified by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.21 |
sheIgmpMaxJoinedGroupModifiedThe maximum number of multicast group that a subscriber can join has been modified by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.22 |
sheIgmpProfileChannelAdmissionModifiedIGMP Mcast admission control feature configuration done. New with R2.8. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.24 |
sheIgmpChannelParameterModifiedIGMPv3 group channel releated parameters modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.25 |
sheIgmpSourceIpEntryCreatedIgmpv3 SourceIpAddress entry created. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.26 |
sheIgmpSourceIpEntryDeletedIgmpv3 SourceIpAddress entry deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.27 |
sheIgmpTagModeModifiedThe general IGMP Tag parameterS has been modified by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.14.34 |
sheIgmpPerformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16 |
sheIgmpPerformanceMonitoring OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1 |
sheIgmpPmObjectTableThe table holds all IGMP PM objects existing in the NE. SEQUENCE OF SheIgmpPmObjectEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.1 |
sheIgmpPmObjectEntryA table entry shows the multicast group a PM object is related to. SheIgmpPmObjectEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.1.1 |
sheIgmpPmObjectIndexUnique index for IGMP PM objects existing in the NE. One multicast group can have one PM object, including both interval types.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.1.1.1 |
sheIgmpPmObjectGroupIndexIndex sheIgmpGroupIndex of the sheIgmpGroupTable selects the multicast group a PM object is related to.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.1.1.2 |
sheIgmpPmCurrentTableThis table contains the entries for Performance Monitoring for multicast groups of the current 15 minute interval and the current day. SEQUENCE OF SheIgmpPmCurrentEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2 |
sheIgmpPmCurrentEntryAn entry describing the current PM data of a multicast group for a certain interval type. Indices are sheIgmpPmObjectIndex and sheIgmpPmCurrentIntervalType. SheIgmpPmCurrentEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1 |
sheIgmpPmCurrentIntervalTypeThis attribute is used to select between the 15 min or the day accumulation types.ro ShePmIntervalType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.1 |
sheIgmpPmCurrentAdminStateThis read-write attribute is used to activate (up) and deactivate (down) performance monitoring for the multicast group and interval type.rw SheAdminStateType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.2 |
sheIgmpPmCurrentSuspectFlagThis read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.ro ShePmSuspectFlagType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.3 |
sheIgmpPmCurrentHistEntrySizeThe number of history entries configured for the multicast group and interval type. This attribute is used for history data collection. The default value is 1 and means at least one history entry is desired.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.4 |
sheIgmpPmCurrentHistEntriesAvailableThis read-only attribute indicates how many HistEntries are already available. The range of values is between 0 and sheIgmpPmCurrentHistEntrySize. Thereby 0 means that this entry is not valid.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.5 |
sheIgmpPmCurrentElapsedTimeThis read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute interval is selected or minutes for day interval. (Note: accurate to the sample time interval).ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.6 |
sheIgmpPmCurrentMembershipReportsFromHostSuccessful join requests for the multicast group received from the subscriber ports.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.7 |
sheIgmpPmCurrentPeakMembershipReportsFromHostPeak of successful join requests per second for the multicast group received from the subscriber ports.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.8 |
sheIgmpPmCurrentTimeOfPeakMembershipReportsTime and date of the peak of successful join requests per second for the multicast group received from the subscriber ports.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.9 |
sheIgmpPmCurrentGroupLeavesFromHostIGMP group leave messages for the multicast group received from the subscriber ports.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.10 |
sheIgmpPmCurrentPeakGroupLeavesFromHostPeak of IGMP group leave messages per second for the multicast group received from the subscriber ports.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.11 |
sheIgmpPmCurrentTimeOfPeakGroupLeavesTime and date of the peak of IGMP group leave messages per second for the multicast group received from the subscriber ports.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.12 |
sheIgmpPmCurrentMembershipReportsToRouterSuccessful join requests for the multicast group sent to the router.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.13 |
sheIgmpPmCurrentGroupLeavesToRouterIGMP group leave messages for the multicast group sent to the router.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.14 |
sheIgmpPmCurrentPeakMulticastLeavesThe peak number of the multicast tree leaves (branches) for the multicast group shows the peak number of joined subscriber ports.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.2.1.15 |
sheIgmpPmHistoryTableTableA table containing all IGMP PM history data. Indices of the table are the PM object, the interval type and the record number. SEQUENCE OF SheIgmpPmHistoryTableEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3 |
sheIgmpPmHistoryTableEntryAn entry describing the history PM data of a multicast group for a certain interval type and record number. SheIgmpPmHistoryTableEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1 |
sheIgmpPmHistoryIntervalTypeThis attribute is used to select between the 15 min or the day accumulation types.ro ShePmIntervalType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.1 |
sheIgmpPmHistoryEntryNumberThis attribute is an index used to address the PM history entry. Entry 1 is the most recent. The range of values is between 1 and sheIgmpPmCurrentHistEntrySize.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.2 |
sheIgmpPmHistorySuspectFlagThis read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.ro ShePmSuspectFlagType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.3 |
sheIgmpPmHistoryPeriodEndTimeDate/time at the end of the selected interval.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.4 |
sheIgmpPmHistoryMembershipReportsFromHostSuccessful join requests for the multicast group received from the subscriber ports.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.5 |
sheIgmpPmHistoryPeakMembershipReportsFromHostPeak of successful join requests per second for the multicast group received from the subscriber ports.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.6 |
sheIgmpPmHistoryTimeOfPeakMembershipReportsTime and date of the peak of successful join requests per second for the multicast group received from the subscriber ports.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.7 |
sheIgmpPmHistoryGroupLeavesFromHostIGMP group leave messages for the multicast group received from the subscriber ports.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.8 |
sheIgmpPmHistoryPeakGroupLeavesFromHostPeak of IGMP group leave messages per second for the multicast group received from the subscriber ports.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.9 |
sheIgmpPmHistoryTimeOfPeakGroupLeavesTime and date of the peak of IGMP group leave messages per second for the multicast group received from the subscriber ports.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.10 |
sheIgmpPmHistoryMembershipReportsToRouterSuccessful join requests for the multicast group sent to the router.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.11 |
sheIgmpPmHistoryGroupLeavesToRouterIGMP group leave messages for the multicast group sent to the router.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.12 |
sheIgmpPmHistoryPeakMulticastLeavesThe peak number of the multicast tree leaves (branches) for the multicast group shows the peak number of joined subscriber ports.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.1.3.1.13 |
sheIgmpPerformanceControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2 |
sheIgmpPmControlRequestcreatePmObject sheIgmpPmControlGroupIndex sheIgmpPmControlHistEntrySize modifyPmObject sheIgmpPmControlObjectIndex sheIgmpPmControlIntervalType sheIgmpPmControlHistEntrySize deletePmObject sheIgmpPmControlObjectIndexrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.1 |
sheIgmpPmControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.2 |
sheIgmpPmControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.3 |
sheIgmpPmControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.4 |
sheIgmpPmControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.5 |
sheIgmpPmControlObjectIndexIndex sheIgmpPmObjectIndex of the PM object in the sheIgmpPmObjectTable to be modified or deleted. parameter for modifyPmObject deletePmObjectrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.6 |
sheIgmpPmControlObjectGroupIndexIndex sheIgmpGroupIndex of the sheIgmpGroupTable selects the multicast group a PM object is created for. parameter for createPmObjectrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.7 |
sheIgmpPmControlIntervalTypeThis attribute is used to select between the 15 min or the day accumulation types. parameter for modifyPmObjectrw ShePmIntervalType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.8 |
sheIgmpPmControlHistEntrySizeThe number of history entries configured for the multicast group and interval type. This attribute is used for history data collection. The default value is 1 and means at least one history entry is desired. In case of PM object creation the number of 15 min entries is set and the number of 24 h entries is always 1. parameter for createPmObject modifyPmObjectrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.9 |
sheIgmpPmControlRemainingHistoryEntriesThe number of history entries which are still available for the PM data collection within the NE. The memory for PM data is limited. The manager can read this attribute before/after the execution of PM object commands to inform himself about the remaining history size.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.2.10 |
sheIgmpPerformanceNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.3 |
sheIgmpPmObjectCreatedIGMP PM object has been created. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.3.1 |
sheIgmpPmObjectModifiedIGMP PM object has been modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.3.2 |
sheIgmpPmObjectDeletedIGMP PM object has been deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.3.3 |
sheIgmpPerformanceConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4 |
sheIgmpPerformanceCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.1 |
sheIgmpPerformanceComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.1.1 |
sheIgmpPerformanceGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2 |
sheIgmpPmObjectGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.1 |
sheIgmpPmCurrentGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.2 |
sheIgmpPmHistoryGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.3 |
sheIgmpPmControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.4 |
sheIgmpPmNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.16.4.2.5 |
sheIgmpStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17 |
sheIgmpStatsGroupTableThe table holds IGMP statistics group table in the NE. SEQUENCE OF SheIgmpStatsGroupEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.1 |
sheIgmpStatsGroupEntryThe table entry shows the IGMP group statistics. SheIgmpStatsGroupEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.1.1 |
sheIgmpStatsGroupIndexIdentifier of sheIgmpGroupTablero Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.1.1.1 |
sheIgmpStatsGroupTimeSinceLastMembershipReportTime since last Membership Report was received for acticve dynamic multicast cross-connection.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.1.1.2 |
sheIgmpStatsBase OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2 |
sheIgmpStatsNumberOfGroupsToRouterThe Number of active multicast connections cross-connected by the DSLAMro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.1 |
sheIgmpStatsNumberOfGroupsToHostThe Number of different ip multicast groups currently connected to end usersro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.2 |
sheIgmpStatsNumberOfQueryReceivedThe Number of Igmp query message received by DSLAMro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.3 |
sheIgmpStatsNumberOfReportReceivedThe Number of Igmp report message received by DSLAMro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.4 |
sheIgmpStatsNumberOfLeaveReceivedThe Number of Igmp leave message received by DSLAMro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.5 |
sheIgmpStatsNumberOfInvalidReceivedThe Number of invalid message received by DSLAMro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.6 |
sheIgmpStatsPeakNumberOfActiveGroupToRouterThe number of active multicast connections cross-connected by the DSLAM per second when the peakro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.7 |
sheIgmpStatsTimeOfPeakNumberOfActiveGroupToRouterTime and date of the peak of active multicast connections cross-connected by the DSLAMro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.8 |
sheIgmpStatsPeakNumberOfActiveGroupFromHostThe number of different ip multicast groups currently connected to end users per second when the peakro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.9 |
sheIgmpStatsTimeOfPeakNumberOfActiveGroupFromHostTime and date of the peak of different ip multicast groups currently connected to end usersro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.10 |
sheIgmpStatsNumberOfMsgPerSecIGMP-messages-rate. The number of IGMP messages received by the DSLAM in one second.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.11 |
sheIgmpStatsPeakNumberOfMsgPerSecPeak-IGMP-messages-rate. The maximum value of IGMP-messages-rate.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.12 |
sheIgmpStatsTimeOfPeakNumberOfMsgPerSecTime and date of the peak of IGMP-messages-rate.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.2.13 |
sheIgmpStatsBaseControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3 |
sheIgmpStatsBaseControlRequestControlrequest for configuration. 741 - clearIgmpStatsBaserw SheIgmpStatsBaseControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3.1 |
sheIgmpStatsBaseControlStatusDescribes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at end of commandro SheIgmpStatsBaseControlStatusType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3.2 |
sheIgmpStatsBaseControlTimestampThe time stamp of the last command (end of command)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3.3 |
sheIgmpStatsBaseControlReqResultResult of the last commandro SheIgmpStatsBaseControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.3.4 |
sheIgmpStatsPortTableThe table holds IGMP statistics port table in the NE. SEQUENCE OF SheIgmpStatsPortEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4 |
sheIgmpStatsPortEntryThe table entry shows the IGMP port statistics. SheIgmpStatsPortEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1 |
sheIgmpStatsPortNumberOfGroupsThe Number of different ip multicast groups currently connected to end userro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.1 |
sheIgmpStatsPortNumberOfQueryReceivedThe Number of Igmp query message received from a subscriber portro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.2 |
sheIgmpStatsPortNumberOfReportReceivedThe Number of Igmp report message received from a subscriber portro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.3 |
sheIgmpStatsPortNumberOfLeaveReceivedThe Number of Igmp leave message received from a subscriber portro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.4 |
sheIgmpStatsPortNumberOfInvalidReceivedThe Number of invalid message received from a subscriber portro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.5 |
sheIgmpStatsPortPeakNumberOfActiveGroupNumber of active multicast group when the peakro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.6 |
sheIgmpStatsPortTimeOfPeakNumberOfActiveGroupTime and date of the peak of active multicast groupro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.7 |
sheIgmpStatsPortNumberOfDroppedByCANumber of IGMP msg dropped by conditional access (if CPV failed or if max number of active m/c channels is exceeded). New parameter with SHE R2.8.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.8 |
sheIgmpStatsPortNumberOfDroppedByACNumber of IGMP msg dropped by admission control (if max m/c bandwidth on a bport is exceeded or if max number of non-premium channels is exceeded). New parameter with SHE R2.8.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.4.1.9 |
sheIgmpStatsPortControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5 |
sheIgmpStatsPortControlRequestControlrequest for configuration. 742 - clearIgmpStatsPortrw SheIgmpStatsPortControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.1 |
sheIgmpStatsPortControlStatusDescribes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at end of commandro SheIgmpStatsPortControlStatusType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.2 |
sheIgmpStatsPortControlTimestampThe time stamp of the last command (end of command)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.3 |
sheIgmpStatsPortControlReqResultResult of the last commandro SheIgmpStatsPortControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.4 |
sheIgmpStatsPortControlBridgePortIndexTable index (A bridgePort-identifier)rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.5.5 |
sheIgmpStatsProviderTableThe table contains entries for statistics of igmp providers of DSLAM SEQUENCE OF SheIgmpStatsProviderEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6 |
sheIgmpStatsProviderEntryThe table entry shows the IGMP provider statistics. SheIgmpStatsProviderEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1 |
sheIgmpStatsProviderNumberOfChannelsToRouterThe Number of active multicast channels connections cross-connected by a providerro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.1 |
sheIgmpStatsProviderNumberOfChannelsToHostThe Number of different ip multicast channels currently connected to end usersro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.2 |
sheIgmpStatsProviderNumberOfQueryReceivedThe Number of Igmp query message received by provider.ro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.3 |
sheIgmpStatsProviderNumberOfReportReceivedThe Number of Igmp report message received by provider.ro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.4 |
sheIgmpStatsProviderNumberOfLeaveReceivedThe Number of Igmp leave message received by provider.ro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.5 |
sheIgmpStatsProviderNumberOfInvalidReceivedThe Number of invalid message received by provider.ro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.6 |
sheIgmpStatsProviderPeakNumberOfActiveChannelToRouterThe number of active multicast connections cross-connected by the provider per second when the peak.ro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.7 |
sheIgmpStatsProviderTimeOfPeakNumberOfActiveChannelToRouterTime and date of the peak of active multicast connections cross-connected by the provider.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.8 |
sheIgmpStatsProviderPeakNumberOfActiveChannelFromHostThe number of different ip multicast channels currently connected to end users per second when the peakro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.9 |
sheIgmpStatsProviderTimeOfPeakNumberOfActiveChannelFromHostTime and date of the peak of different ip multicast channels currently connected to end usersro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.10 |
sheIgmpStatsProviderNumberOfMsgPerSecIGMP-messages-rate. The number of IGMP messages received by the provider in one second.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.11 |
sheIgmpStatsProviderPeakNumberOfMsgPerSecPeak-IGMP-messages-rate. The maximum value of IGMP-messages-rate.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.12 |
sheIgmpStatsProviderTimeOfPeakNumberOfMsgPerSecTime and date of the peak of IGMP-messages-rate.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.6.1.13 |
sheIgmpStatsProviderControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7 |
sheIgmpStatsProviderControlRequestControlrequest for configuration. 743 - clearIgmpStatsProvider: sheIgmpStatsProviderIndexrw SheIgmpStatsProviderControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.1 |
sheIgmpStatsProviderControlStatusDescribes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at end of commandro SheIgmpStatsBaseControlStatusType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.2 |
sheIgmpStatsProviderControlTimestampThe time stamp of the last command (end of command)ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.3 |
sheIgmpStatsProviderControlReqResultResult of the last commandro SheIgmpStatsBaseControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.4 |
sheIgmpStatsProviderControlProviderIndexA provider index.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.17.7.5 |
sheIgmpFloodVlanTableThe table has one provider entry. It contains the provider VLAN and the host and querier settings. SEQUENCE OF SheIgmpFloodVlanEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.18 |
sheIgmpFloodVlanEntryIn first release we will only support one table entry. SheIgmpFloodVlanEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.18.1 |
sheIgmpFloodVlanIdA vlanid of which a packet has a destination address as reserved multicast should be flooded without processing. It is for igmp under L2VPN.ro INTEGER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.18.1.1 |
sheIgmpFloodVlanControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.19 |
sheIgmpFloodVlanControlRequestcreateIgmpFloodVlan(743) sheIgmpFloodVlanControlVlanId deleteIgmpFloodVlan(744) sheIgmpFloodVlanControlVlanIdrw SheIgmpFloodVlanControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.1 |
sheIgmpFloodVlanControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.2 |
sheIgmpFloodVlanControlTimestampThe time stamp of the last command (end of command).ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.3 |
sheIgmpFloodVlanControlTimerMaximum command execution time (timeout) in seconds in case of a long running command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.4 |
sheIgmpFloodVlanControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.5 |
sheIgmpFloodVlanControlVlanIdTable indexrw INTEGER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.19.6 |
sheIgmpSourceIpAddressTableNew IGMPv3 configuration with SHE R2.8. SEQUENCE OF SheIgmpSourceIpAddressEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.20 |
sheIgmpSourceIpAddressEntryThis is an unordered list of zero or more IP unicast addresses from which multicast reception is possible. An implementation MAY impose a limit on the size of source lists, but that limit MUST NOT be less than 64 addresses per list. When an operation causes the source list size limit to be exceeded, the service interface MUST return an error. SheIgmpSourceIpAddressEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.20.1 |
sheIgmpSourceIpIndexTable Index. A maximum number of 100 different addresses could be configured inside the NE. These index will be configured in sheIgmpGroupSourceList to select the valid source ip address per group (channel). A default configuration with IP 0.0.0.0 is always available and could not be changed or removed. Only valid for IGMPv3 configuration. New parameter with SHE R2.8.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.20.1.1 |
sheIgmpSourceIpAddressThis is IP unicast addresses from which multicast reception is possible. If the source IP is 0.0.0.0, it should work as a '*' wildcard configuration (per default available). The configuration is only valid if IGMPv3 is running. New parameter with SHE R2.8.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.20.1.2 |
sheIgmpSourceIpAddressControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.21 |
sheIgmpSourceIpControlRequestcreateIgmpSourceIpAddressEntry: sheIgmpSourceIpControlAddress deleteIgmpSourceIpAddressEntry: sheIgmpSourceIpControlIndexrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.21.1 |
sheIgmpSourceIpControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.21.2 |
sheIgmpSourceIpControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.7.21.3 |
sheIgmpSourceIpControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.21.4 |
sheIgmpSourceIpControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.21.5 |
sheIgmpSourceIpControlIndexA table index used for delete an entry.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.21.6 |
sheIgmpSourceIpControlAddressThis is IP unicast addresses from which multicast reception is possible. The configuration is only valid if IGMPv3 is running. New parameter with SHE R2.8.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.21.7 |
sheIgmpBridgePortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22 |
sheIgmpBridgePortProviderConfigTableFor the subscriber bridge ports (first table index is sheBridgePortIndex) the table has entries for all multicast provider Vlan a port has currently joined (second table index is sheIgmpProfileVlanVlanId). New supported with SHE R2.8! SEQUENCE OF SheIgmpBridgePortProviderConfigEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.1 |
sheIgmpBridgePortProviderConfigEntryThe MCast configuration settiongs per BridgePort. SheIgmpBridgePortProviderConfigEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.1.1 |
sheIgmpBridgePortProviderVlanIdMCast Provider VLAN id for the bridge port (second tableindex). New parameter with SHE R2.8.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.1.1.1 |
sheIgmpBridgePortProviderTranslationVlanIdTranslation VLAN id for the bridge port. New parameter with SHE R2.8.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.1.1.2 |
sheIgmpBridgePortProviderAllowedVlanIdListThe octet string is a list of two octet entries each identifying a sheVlanIndex which is allowed on these bridgeport. The least significant byte is the second octet. The octet string has a variable length of up to 32 octets (max 16 vlan entrys). A entry with 0xffff is a wildCard to indicate that each vlan is allowed. New parameter with SHE R2.8.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.1.1.3 |
sheIgmpBridgePortProviderMcastRemainBandwithIt is the bridge port remaining multicast bandwidth per provider. New parameter with SHE R2.8.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.1.1.4 |
sheIgmpBridgePortProviderMcastACStatusIt indicate the bridge port AC (admission control )status per provider. It can be accept or deny. When it is accepted, it indicates the provider still has enough bandwidth for multicast access. When it is denied, it indicates the provider is short of bandwidth for multicast access. 1 means accept, 0 means deny New parameter with SHE R2.8.ro SheIgmpProviderACStatus .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.1.1.5 |
sheIgmpBridgePortProviderControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2 |
sheIgmpBridgePortProviderControlRequestcreateIgmpBridgePortProviderEntry(763): sheIgmpBridgePortProviderControlIndex sheIgmpBridgePortProviderControlProviderVlanId sheIgmpBridgePortProviderControlTranslationVlanId sheIgmpBridgePortProviderControlAllowedVlanIdList modifyIgmpBridgePortProviderEntry(764): sheIgmpBridgePortProviderControlIndex sheIgmpBridgePortProviderControlProviderVlanId sheIgmpBridgePortProviderControlTranslationVlanId sheIgmpBridgePortProviderControlAllowedVlanIdList deleteIgmpBridgePortProviderEntry(765): sheIgmpBridgePortProviderControlIndex sheIgmpBridgePortProviderControlProviderVlanIdrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.1 |
sheIgmpBridgePortProviderControlIndexThe index of the bridgePort to be configured.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.2 |
sheIgmpBridgePortProviderControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.3 |
sheIgmpBridgePortProviderControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.4 |
sheIgmpBridgePortProviderControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.5 |
sheIgmpBridgePortProviderControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.6 |
sheIgmpBridgePortProviderControlProviderVlanIdMCast Provider VLAN id for the bridge port (second tableindex). New parameter with SHE R2.8.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.7 |
sheIgmpBridgePortProviderControlTranslationVlanIdTranslation VLAN id for the bridge port. New parameter with SHE R2.8.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.8 |
sheIgmpBridgePortProviderControlAllowedVlanIdListThe octet string is a list of two octet entries each identifying a sheVlanIndex which is allowed on these bridgeport. The least significant byte is the second octet. The octet string has a variable length of up to 32 octets (max 16 vlan entrys). A entry with 0xffff is a wildCard to indicate that each vlan is allowed. New parameter with SHE R2.8.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.2.9 |
sheIgmpBridgePortNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.5 |
sheIgmpBridgePortProviderParameterCreatedsend trap when bridgeport R2.8 igmp provider parameter was created. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.5.1 |
sheIgmpBridgePortProviderParameterModifiedsend trap when bridgeport R2.8 igmp provider parameter was modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.5.2 |
sheIgmpBridgePortProviderParameterDeletedsend trap when bridgeport R2.8 igmp provider parameter was deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.7.22.5.3 |
sheIgmpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100 |
sheIgmpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.1 |
sheIgmpComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.1.1 |
sheIgmpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2 |
sheIgmpBaseGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.1 |
sheIgmpProfileGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.2 |
sheIgmpProfileControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.3 |
sheIgmpProfileVlanGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.4 |
sheIgmpProfileVlanControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.5 |
sheIgmpGroupGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.6 |
sheIgmpGroupControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.7 |
sheIgmpMcastGroupPackageGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.8 |
sheIgmpMcastGroupPackageControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.9 |
sheIgmpPortGroupsGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.10 |
sheIgmpNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.11 |
sheIgmpStatisticsGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.12 |
sheIgmpFloodVlanTableGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.13 |
sheIgmpFloodVlanControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.14 |
sheIgmpObsoleteGroupDescription.obsolete Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.15 |
sheIgmpObsoleteNotificationGroupDescription.obsolete Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.16 |
sheIgmpBridgePortGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.17 |
sheIgmpBridgePortControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.18 |
sheIgmpBridgePortNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.7.100.2.19 |
sheQueueConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.8 |
sheQueuePriorityTableConfigure the .1p prioritys of each queue for upstream and downstream direction. SEQUENCE OF SheQueuePriorityEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.8.1 |
sheQueuePriorityEntryOne entry for each priority. SheQueuePriorityEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.8.1.1 |
sheQueuePriorityThe index of that table. It represents the .1p Priority + 1,because priority values will have a range from 0-7 but index has to start always with 1.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.1.1.1 |
sheQueueNumberThat represents the Queue-Number. Only applicable for ingress queues on iu, because cxu_b will always use only one queue for traffic.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.1.1.2 |
sheReducedQueuePriorityTableThere could a shrinking of queues on the iu in downstream direction (depending on the used IU type). So the available .1p-prioritys has to be mapped on a set of only four available queue-numbers. SEQUENCE OF SheReducedQueuePriorityEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.8.2 |
sheReducedQueuePriorityEntryOne entry for each priority. SheReducedQueuePriorityEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.8.2.1 |
sheReducedQueuePriorityThe index of that table. It represents the .1p Priority + 1,because priority values will have a range from 0-7 but index has to start always with 1.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.2.1.1 |
sheReducedQueueNumberNumber of the outgoing queue, where this priority is mapped on.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.2.1.2 |
sheQueueControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.8.3 |
sheQueueControlRequestmodifyQueuePriorityMapping: sheQueueControlIndex sheQueueControlQueueNumber modifyReducedQueuePriorityMapping: sheQueueControlIndex sheQueueControlQueueNumberrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.1 |
sheQueueControlIndexThe table-index to be modified.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.2 |
sheQueueControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.3 |
sheQueueControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.4 |
sheQueueControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.5 |
sheQueueControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.6 |
sheQueueControlQueueNumberThe range for this value depends on the used ControlRequest. In case of the Controlrequest is modifyReducedQueuePriorityMapping, the range is only 1..4!rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.3.7 |
sheQueueModeTableConfigure queue mode depending on the interfacetype. SEQUENCE OF SheQueueModeEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.8.4 |
sheQueueModeEntryOne entry for each interface type. SheQueueModeEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.8.4.1 |
sheQueueModeInterfaceTypeIndexDescribes the interface type, were this queue configuration should be used. uplink downlink cascading subcascadingro SheBridgeInterfaceType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.4.1.1 |
sheQueueConfigurationModeDescribes the queue mode, for this interface type. strict weighted Note: Mode 'weighted' could mean 'weighted round robin' (wrr) or 'weighted fair queueing' (wfq) and depends on the individual HW restrictions of the used board's.ro SheQueueModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.4.1.2 |
sheQueueModeControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.8.5 |
sheQueueModeControlRequestmodifyQueueModeEntry: sheQueueModeControlIndex sheQueueModeControlModerw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.1 |
sheQueueModeControlIndexThe table index to be modified.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.2 |
sheQueueModeControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.3 |
sheQueueModeControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.4 |
sheQueueModeControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.5 |
sheQueueModeControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.6 |
sheQueueModeControlModeSet the queue mode.rw SheQueueModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.5.7 |
sheQueueWeightTableConfigure weight's of queues for upstream direction. SEQUENCE OF SheQueueWeightEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.8.6 |
sheQueueWeightEntryOne entry for each queue. SheQueueWeightEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1 |
sheQueueIndexA table index. This index represents the Queue-Number.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1.1 |
sheQueueWeightA weight value for queue if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1.2 |
sheQueueWeightWatermarkLowA low watermark value for a NE internal color aware queue handling. This value represents a % - Value of usage of the total Queue-Size. Default values: ------------------- Queue | Low | ------------------- 1 | 20 % | 2 | 20 % | 3 | 20 % | 4 | 20 % | 5 | 30 % | 6 | 30 % | 7 | 15 % | 8 | 15 % |ro Integer32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1.3 |
sheQueueWeightWatermarkHighA high watermark value for a NE internal color aware queue handling. High watermark defines additional the total used queue size as %-value of the theoretical possible queue size. Default Values: ------------ Queue | High ------------ 1 | 30 % 2 | 30 % 3 | 30 % 4 | 30 % 5 | 40 % 6 | 40 % 7 | 20 % 8 | 20 %ro Integer32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.6.1.4 |
sheQueueWeightControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.8.7 |
sheQueueWeightControlRequestmodifyQueueWeightEntry: sheQueueWeightControlIndex sheQueueWeightControlWeight sheQueueWeightControlWatermarkLow sheQueueWeightControlWatermarkHighrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.1 |
sheQueueWeightControlIndexThe table-entry to be modified.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.2 |
sheQueueWeightControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.3 |
sheQueueWeightControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.4 |
sheQueueWeightControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.5 |
sheQueueWeightControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.6 |
sheQueueWeightControlWeightLook at weight-table description.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.7 |
sheQueueWeightControlWatermarkLowNot needed for configuration in current scenario. This value represents a % - Value of usage of the total Queue-Size.rw Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.8 |
sheQueueWeightControlWatermarkHighNot needed for configuration in current scenario.This value represents a % - Value of usage of the total Queue-Size.rw Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.7.9 |
sheQueueNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.8.9 |
sheQueuePriorityMappingModifiedConfiguration notification for priority mapping table. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.1 |
sheReducedQueuePriorityMappingModifiedConfiguration notification for shrink mapping table. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.2 |
sheQueueModeEntryModifiedConfiguration notification for queue mode table. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.3 |
sheQueueWeightEntryModifiedConfiguration notification for queue weight table. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.4 |
sheCardQueueEntryConfiguredConfigure the queue handling for a card. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.5 |
sheCardQueueEntryDeletedDelete the queue handling for a card. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.6 |
sheCardQueueEntryConfigResultResult trap for long running command to configure the queue handling for a card. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.8.9.7 |
sheCardQueueConfigurationTableConfigure the queue handling individuell per configured card. This will replace the general queue configuration settings. Per default, no indivudell settings are made and this table is empty (could be change during development). NEW supported with R2.8! SEQUENCE OF SheCardQueueConfigurationEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10 |
sheCardQueueConfigurationEntryOne entry for each card, if these card should not use the global NE queue configuration parameters. If a card type will never uses the global NE parameters, a entry for this card will be automatically created during card creation process. This table uses two indices: First index is the entPhysicalIndex from entPhysicalTable for the card. Second index is sheCardQueueInterfaceTypeIndex from this table. SheCardQueueConfigurationEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1 |
sheCardQueueInterfaceTypeIndexDescribes the interface type, were this queue configuration should be used. Valid values for this configuration's are: uplink(1) -> for central board means uplink, for IU means interlink to cxu downlink(2) -> for central board means interlink to IU's, for IU means subcriberro SheBridgeInterfaceType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.1 |
sheCardQueueSchedulingModeDescribes the queue scheduling mode. strict weighted Note: Mode 'weighted' could mean 'weighted round robin' (wrr) or 'weighted fair queueing' (wfq) and depends on the individual HW restrictions of the used board's.ro SheQueueModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.10 |
sheCardQueue1WeightA weight value for queue 1 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.11 |
sheCardQueue1WatermarksA watermark configuration for a NE internal colour aware queue handling for queue number 1. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.ro Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.12 |
sheCardQueue2WeightA weight value for queue 2 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.13 |
sheCardQueue2WatermarksA watermark configuration for a NE internal colour aware queue handling for queue number 2. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.ro Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.14 |
sheCardQueue3WeightA weight value for queue 3 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.15 |
sheCardQueue3WatermarksA watermark configuration for a NE internal colour aware queue handling for queue number 3. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.ro Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.16 |
sheCardQueue4WeightA weight value for queue 4 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.17 |
sheCardQueue4WatermarksA watermark configuration for a NE internal colour aware queue handling for queue number 4. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.ro Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.18 |
sheCardQueue5WeightA weight value for queue 5 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.19 |
sheCardQueue5WatermarksA watermark configuration for a NE internal colour aware queue handling for queue number 5. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.ro Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.20 |
sheCardQueue6WeightA weight value for queue 6 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.21 |
sheCardQueue6WatermarksA watermark configuration for a NE internal colour aware queue handling for queue number 6. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.ro Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.22 |
sheCardQueue7WeightA weight value for queue 7 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.23 |
sheCardQueue7WatermarksA watermark configuration for a NE internal colour aware queue handling for queue number 7. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.ro Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.24 |
sheCardQueue8WeightA weight value for queue 8 if mode is not strict. Depending on used HW (CXU types, IU types) works not on all interface types. Weights are interpreted not as absolute values but only in relation to the sum of the weights of all queues. If a weight of a queue is set to 100, this queue will work in 'strict' mode against lower prio queues again.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.25 |
sheCardQueue8WatermarksA watermark configuration for a NE internal colour aware queue handling for queue number 8. The lower two octets representing the low watermark and the higher two octets the high watermark value. This value's represents a % - value of usage of the total Queue-Size. Depending on the card type,these configuration could have no effect!! Example: 0x00500032 -> high watermark = 0x0050 = 80% -> low watermark = 0x0032 = 50% The maximum value for a single watermark is 0x0064 = 100 %. The high watermark defines additional the total used queue size as %-value of the theoretical possible queue size.ro Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.26 |
sheCardQueueColourAwareTCSourceConfigure, how the current traffic class of a frame should detected. Valid values: none(0), dscp(2), providerBridge(4) Configuration will be currently ignored! Starting support planed for R3.5!ro SheQueueColourAwareType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.27 |
sheCardQueueColourMarkingConfigure, if and how the current colour should be marked. Colour marking will only work in upstream direction. Valid values: none(0), dscp(2), providerBridge(4) Configuration will be currently ignored! Starting support planed for 3.5!ro SheQueueColourAwareType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.28 |
sheCardQueueDiscardPolicyDescribes the policy in case of frame discards. Possible values: tailDrop(1), wRed(2) Configuration will be currently ignored! Starting support planed for R3.5!ro SheQueueDiscardPolicyType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.29 |
sheCardQueueModeThis parameter describe the general queue mode for this card. Depending on the used card type not all modes are available. modeHQS will only be supported by DSL cards with Convergate chipset and only in downstream direction. mode8QueueFlat will only be supported by VDSL2 and Shdsl2 cards and only in downstream direction. mode4QueueFlat(1) -> 4 queues per port mode8QueueFlat(2) -> 8 queues per port modeHQS(3) -> 8 queues with hierarchical queuing and scheduling. New parameter with R2.8.ro SheCardQueueModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.30 |
sheCardQueueHqsSecondStageInputQueueThis parameter is only valid for queuemode 'modeHQS' and is don't care for the others. The queue of the second level scheduler (queuenumbers 5-8) in which the frames of the first level scheduler will be enqueued could be selected here. New parameter with R2.8.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.31 |
sheCardQueueHqsFirstStagePirThis parameter configures the peek information rate of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. Note: The PIR of the first level queuing block should not be higher than the emission rate of the respective second level queue into which the first level queues are enqueued. The given value could be adapted (rounded) in the NE to fullfill different HW dependencies. That will not shown here. For example, IU's with Convergate chipset will round the configured value to multiples of 1 kByte/s. New parameter with R2.8.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.32 |
sheCardQueueHqsFirstStagePbsThis parameter configures the peek burst size of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. New parameter with R2.8.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.10.1.33 |
sheCardQueueConfigurationControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11 |
sheCardQueueControlRequestconfigureCardQueueConfigurationEntry: sheCardQueueConfigurationControlIndex sheCardQueueControlInterfaceTypeIndex ... deleteCardQueueConfigurationEntry: sheCardQueueConfigurationControlIndex sheCardQueueControlInterfaceTypeIndexrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.1 |
sheCardQueueControlIndexThe first index (entPhysicalIndex of card) to identify the table-entry to be configured.rw PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.2 |
sheCardQueueControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.3 |
sheCardQueueControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.4 |
sheCardQueueControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.5 |
sheCardQueueControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.6 |
sheCardQueueControlInterfaceTypeIndexThe second index to identify the table-entry to be configured.rw SheBridgeInterfaceType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.7 |
sheCardQueueControlSchedulingModeSet the queue scheduling mode.rw SheQueueModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.16 |
sheCardQueueControlQueue1WeightLook at table description.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.17 |
sheCardQueueControlQueue1WatermarksLook at table description.rw Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.18 |
sheCardQueueControlQueue2WeightLook at table description.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.19 |
sheCardQueueControlQueue2WatermarksLook at table description.rw Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.20 |
sheCardQueueControlQueue3WeightLook at table description.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.21 |
sheCardQueueControlQueue3WatermarksLook at table description.rw Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.22 |
sheCardQueueControlQueue4WeightLook at table description.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.23 |
sheCardQueueControlQueue4WatermarksLook at table description.rw Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.24 |
sheCardQueueControlQueue5WeightLook at table description.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.25 |
sheCardQueueControlQueue5WatermarksLook at table description.rw Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.26 |
sheCardQueueControlQueue6WeightLook at table description.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.27 |
sheCardQueueControlQueue6WatermarksLook at table description.rw Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.28 |
sheCardQueueControlQueue7WeightLook at table description.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.29 |
sheCardQueueControlQueue7WatermarksLook at table description.rw Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.30 |
sheCardQueueControlQueue8WeightLook at table description.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.31 |
sheCardQueueControlQueue8WatermarksLook at table description.rw Unsigned32 UNITS "%" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.32 |
sheCardQueueControlColourAwareTCSourceLook at table description.rw SheQueueColourAwareType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.33 |
sheCardQueueControlColourMarkingLook at table description.rw SheQueueColourAwareType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.34 |
sheCardQueueControlDiscardPolicyLook at table description.rw SheQueueDiscardPolicyType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.35 |
sheCardQueueControlModeThis parameter set the general queue mode for this card. Depending on the used card type not all modes are available. modeHQS will only be supported by DSL cards with Convergate chipset and only in downstream direction. mode8QueueFlat will only be supported by VDSL2 and Shdsl2 cards and only in downstream direction. mode4QueueFlat(1) -> 4 queues per port mode8QueueFlat(2) -> 8 queues per port modeHQS(3) -> 8 queues with hierarchical queuing and scheduling. New parameter with R2.8.rw SheCardQueueModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.36 |
sheCardQueueControlHqsSecondStageInputQueueThis parameter is only valid for queuemode 'modeHQS' and is don't care for the others. The queue of the second level scheduler (queuenumbers 1-4) in which the frames of the first level scheduler will be enqueued could be selected here. New parameter with R2.8.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.37 |
sheCardQueueControlHqsFirstStagePirThis parameter configures the peek information rate of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. Note: The PIR of the first level queuing block should not be higher than the emission rate of the respective second level queue into which the first level queues are enqueued. The given value could be adapted (rounded) in the NE to fullfill different HW dependencies. That will not shown here. For example, IU's with Convergate chipset will round the configured value to multiples of 1 kByte/s. New parameter with R2.8.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.38 |
sheCardQueueControlHqsFirstStagePbsThis parameter configures the peek burst size of the first stage scheduler if queuemode modeHQS is running. Otherwise don't care. New parameter with R2.8.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.11.39 |
sheShapingProfileTableThe shaping profile table. SEQUENCE OF SheShapingProfileEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.8.12 |
sheShapingProfileEntryOne entry for each shaping profile. Selection of the used profile will be done via ShapingProfileAssignmentTable. SheShapingProfileEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1 |
sheShapingProfileIndexA profile-table index.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1.1 |
sheShapingProfileNameA descriptional name for this Shaping profile. Spaces and other special characters (: o) are not allowed!!ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1.2 |
sheShapingProfileCirThe Committed Information Rate for downstream shaping.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1.3 |
sheShapingProfileCbsThe Committed Burst Size for downstream shaping.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.12.1.4 |
sheShapingProfileControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.8.13 |
sheShapingProfileControlRequestcreateShapingProfile: sheShapingProfileControlName sheShapingProfileControlCir sheShapingProfileControlCbs deleteShapingProfile: sheShapingProfileControlIndex modifyShapingProfile: sheShapingProfileControlIndex sheShapingProfileControlName sheShapingProfileControlCir sheShapingProfileControlCbsrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.1 |
sheShapingProfileControlIndexIndex of the configured table entry. Needed for modify or delete.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.2 |
sheShapingProfileControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.3 |
sheShapingProfileControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.4 |
sheShapingProfileControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.5 |
sheShapingProfileControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.6 |
sheShapingProfileControlProfileNamelook at ShapingProfileTable... Spaces and other special characters (: o) are not allowed!!rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.7 |
sheShapingProfileControlProfileCirlook at ShapingProfileTable...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.8 |
sheShapingProfileControlProfileCbslook at ShapingProfileTable...rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.13.9 |
sheShapingProfileAssignmentTableThe shaping profile assignment table. SEQUENCE OF SheShapingProfileAssignmentEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.8.14 |
sheShapingProfileAssignmentEntryOne entry for each assigned shaping profile. The assignment will use two indeces. First index is the ifIndex of the used subscriber port. Second index is the queue number. New with R2.8: There are two special values for queuenumber are supported, which allow to assign such a shaping profile to the lower (1..4) or upper (5..8) queue-group. If mode4QueueFlat is running, only the lower group is available. One shaping profile for all queues in queuemode mode8QueueFlat or modeHqs is not supported. SheShapingProfileAssignmentEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.8.14.1 |
sheShapingProfileAssignmentQueueNumberThe second index of this table. That represents the used Queue-Number for this ShapingProfile assignment. Note: Depending on the used card type, the number of available queues could be restricted to 4. An assignment to 8 queues will always be possible and the IU will then ignore the upper 4 queue configurations. New with R2.8: Two special values allow the assignment of a shapingProfile to a group of queues for this DSL-port and not only to a single queue of this port. '0' will assign this to the DSL port. For IU_CG boards, this is not fully supported in queue mode 'mode8QueueFlat'. Here this setting will only apply to the higher prio queue group (queue 5..8). Additionally a specific shaper should be configured for the lower prio queue group (queue 1..4) with value '255'.ro Unsigned32 (0 | 1..8 | 255) .1.3.6.1.4.1.231.7.1.2.2.1.4.8.14.1.1 |
sheShapingProfileAssignmentProfileIndexThis value represents a valid index from sheShapingProfileTable which should be used for this DSL-Port and Queue-Number.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.14.1.2 |
sheShapingProfileAssignmentControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.8.15 |
sheShapingProfileAssignmentControlRequestassignShapingProfile: sheShapingProfileAssignmentControlIndex sheShapingProfileAssignmentControlQueueNumber sheShapingProfileAssignmentControlProfileIndex deleteShapingProfileAssignment: sheShapingProfileAssignmentControlIndex sheShapingProfileAssignmentControlQueueNumberrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.1 |
sheShapingProfileAssignmentControlIndexifIndex of the DSL-Interface where a shaping profile should be assigned. First index value for assignment.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.2 |
sheShapingProfileAssignmentControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.3 |
sheShapingProfileAssignmentControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.4 |
sheShapingProfileAssignmentControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.5 |
sheShapingProfileAssignmentControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.6 |
sheShapingProfileAssignmentControlQueueNumberQueueNumber of the DSL-Interface where a shaping profile should be assigned. Second index value for assignment. New with R2.8: Two special values allow the assignment of a shapingProfile to a group of queues for this DSL-port and not only to a single queue of this port. '0' will assign this to the DSL port. For IU_CG boards, this is not fully supported in queue mode 'mode8QueueFlat'. Here this setting will only apply to the higher prio queue group (queue 5..8). Additionally a specific shaper should be configured for the lower prio queue group (queue 1..4) with value '255'.rw Unsigned32 (0 | 1..8 | 255) .1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.7 |
sheShapingProfileAssignmentControlProfileIndexThis value represents a valid index from sheShapingProfileTable which should be used for this DSL-Port and Queue-Number.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.8.15.8 |
sheShapingNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.8.16 |
sheShapingProfileCreatedConfiguration notification. A new shaping profile was created in sheShapingProfileTable. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.8.16.2 |
sheShapingProfileModifiedConfiguration notification. A shaping profile was modified in sheShapingProfileTable. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.8.16.3 |
sheShapingProfileDeletedConfiguration notification. A shaping profile was deleted from sheShapingProfileTable. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.8.16.4 |
sheShapingProfileAssignedConfiguration notification. A shaping profile from sheShapingProfileTable was assigned to port.queuenumber. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.8.16.5 |
sheShapingProfileAssignmentDeletedConfiguration notification. An existing shaping profile assignment was deleted from sheShapingProfileAssignmentTable. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.8.16.6 |
sheQueueConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100 |
sheQueueCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.1 |
sheQueueComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.1.1 |
sheQueueGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2 |
sheQueuePriorityGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.1 |
sheQueuePriorityControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.3 |
sheQueueModeGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.4 |
sheQueueModeControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.5 |
sheQueueWeightGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.6 |
sheQueueWeightControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.7 |
sheQueueCardGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.8 |
sheQueueCardControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.9 |
sheQueueNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.10 |
sheShapingGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.11 |
sheShapingControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.12 |
sheShapingNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.8.100.2.13 |
sheErp OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.9 |
sheErpBase OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.9.1 |
sheErpBaseParam OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.1 |
sheErpDomainTrafficVlanThis octet string with 4096 octets maps payload VLANs to ERP domains: one octet containing the sheErpDomainIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one ERP domain at a time. In this way the ERP domains of the sheErpDomainTable can be used on a per-VLAN basis. The value 0 indicates that no ERP domain is assigned to that VLAN.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.1.1 |
sheErpBaseControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2 |
sheErpBaseControlRequestA SetRequest on this attribute starts a command execution process in the NetElement. - modifyErpDomainTrafficVlan parameters: sheErpBaseControlDomainTrafficVlanrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.1 |
sheErpBaseControlStatusDescribes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of commandro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.2 |
sheErpBaseControlTimestampTime stamp attribute set at the end of a command.ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.3 |
sheErpBaseControlReqResultCommand result (error code) attribute.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.4 |
sheErpBaseControlTimerMaximum command execution time (timeout) in seconds in case of a long running command.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.5 |
sheErpBaseControlDomainTrafficVlanThis octet string with 4096 octets maps payload VLANs to ERP domains: one octet containing the sheErpDomainIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one ERP domain at a time. In this way the ERP domains of the sheErpDomainTable can be used on a per-VLAN basis. The value 0 indicates that no ERP domain is assigned to that VLAN. parameter for - modifyErpDomainTrafficVlanrw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.9.1.2.6 |
sheErpDomain OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2 |
sheErpDomainTableERP domains configuration table with static entries. SEQUENCE OF SheErpDomainEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1 |
sheErpDomainEntryERP Domain entry. SheErpDomainEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1 |
sheErpDomainIndexAn index value that uniquely identifies an ERP domain.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.1 |
sheErpDomainNameThe associated name of the ERP Domain. Spaces and other special characters (: o) are not allowed!!ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.2 |
sheErpDomainPrimaryPortThe sheBridgePortIndex of the sheBridgePortTable that represents the primary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid).ro SheBridgePortIndexOrInvalid .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.3 |
sheErpDomainSecondaryPortThe sheBridgePortIndex of the sheBridgePortTable that represents the secondary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid).ro SheBridgePortIndexOrInvalid .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.4 |
sheErpDomainWaitToRestoreTimeTime in seconds taken to verify that ring integrity is maintained before switch to Idle state after all links have recovered from Link Failure, Link Degrade or Loss of Test Packet. Range 2..720.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.5 |
sheErpDomainTestPacketIntervalTime interval , in milliseconds, between consecutive transmission of test packets. The Test Packet Interval is used to define the time to initiate protection due to Loss of Test Packets, The value of Test Packet Interval is between 10 ms and 500 ms in 10 ms steps.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.6 |
sheErpDomainLearningDisabledTimeConfigures the time during which learning is disabled after a FDB flush. The learning is only disabled for the protected VLAN of the domain on the ERP ports. The value of the Learning Disabled Time is between 0 and 500 ms in steps of 10 ms.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.7 |
sheErpDomainProtectionActivationRepresents if ERP Protection activation is activated or deactivated (admin state). When the ERP domain is activated the ERP process will start running. All alarms/traps are cleared and the ERP protection state is reported as unknown. The domain will enter deactivated state. The ERP protection activation default value is deactivated. deny(0) - protection inactive permit(1) - protection activero ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.8 |
sheErpDomainOperatorRequestTwo operators requests are possible for one ERP domain. For Normal nodes operator requests are ignored. manualToSecondary(1) - Manual Switch to Secondary port - This command enables to swap the roles of primary and secondary port on the RM Node. clear(2) - Clear - This command disables a previous Manual Switch to Secondary port.ro SheErpDomainOperatorRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.9 |
sheErpDomainNodeModeAn ERP domain may operate in two modes. RM Node or Normal Node. The description of these two modes is included in ERP concept specification. Only one node per domain could be a rm node. normalNode(1) rmNode(2)ro SheErpNodeType .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.10 |
sheErpDomainControlVlanRepresents the VLAN ID sheVlanIndex of the control VLAN of the domain. The control VLAN may not be used in other domains as control VLAN or as protected VLAN. The control VLAN must be a VLAN with a high priority QoS profile.ro SheVlanIdOrInvalid .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.11 |
sheErpDomainNodeStatusReflects the domain node status. rmIdle(1) primaryProtecting(2) protecting(3) idle(4) failed-S(5) failed-P(6) preForward(7) isolated(8) deactivated(9) backoff(10)ro SheErpDomainNodeStatusType .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.12 |
sheErpDomainRingStatusActual protection state of the ERP domain on the ring. The following three states are defined: Normal - All ring nodes are available and used. Protecting - At least one Link on the ring is failed. Unknown - This state is used when the ERP protection is not activated, or when the Multiple Failures are detected in a Normal Node.ro SheErpDomainRingStatusType .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.13 |
sheErpDomainLotpErp domain Loss of Test Packet alarm status. Only meaningful for RM nodes. true(1) - alarm active false(2) - alarm inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.14 |
sheErpDomainUlotpErp domain Unidirectional Detection of Loss of Test Packet alarm status. Only meaningful for RM nodes. true(1) - alarm active false(2) - alarm inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.15 |
sheErpDomainMultipleRmErp domain Multiple Redundancy Manager alarm status. Only meaningful for RM nodes. true(1) - alarm active false(2) - alarm inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.16 |
sheErpDomainRmReachRM Node reacheability alarm status. Erp domain detection of mutiple failures in the ring cause the RM Node to become unreacheable to this normal node (only meaningful for normal nodes). true(1) - RM Node is unreacheable, alarm active false(2) - RM Node is reacheable, alarm inactivero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.17 |
sheErpDomainLotpTrapEnableErp domain Loss of Test Packet Trap. Configures sending OF LOTP traps when detected by the RM node. deny(0) permit(1)ro ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.18 |
sheErpDomainUlotpTrapEnableErp domain Unidirectional Loss of Test Packet Trap. Configures sending of ULOTP traps when detected by the RM node. deny(0) permit(1)ro ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.19 |
sheErpDomainMultipleRmTrapEnableErp domain multiple RM nodes Trap. Configures sending of MultipleRM traps when detected by the RM node. deny(0) permit(1)ro ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.20 |
sheErpDomainRmReachTrapEnableErp domain multiple failures trap. Configures sending of RMNodeReacheablility traps when detected by the normal node. deny(0) permit(1)ro ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.21 |
sheErpDomainAlarmSeverityIndexIndex to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per ERP domain.ro SheAlarmSevProfileIndex (SHE-ALARMING-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.1.1.22 |
sheErpDomainControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2 |
sheErpDomainControlRequestA SetRequest on this attribute starts a command execution process in the NetElement. modifyErpDomainEntry(826) parameters: - sheErpDomainControlDomainIndex - sheErpDomainControlDomainName - sheErpDomainControlDomainPrimaryPort - sheErpDomainControlDomainSecondaryPort - sheErpDomainControlWaitToRestoreTime - sheErpDomainControlTestPacketInterval - sheErpDomainControlLearningDisabledTime - sheErpDomainControlDomainNodeMode - sheErpDomainControlDomainControlVlan - sheErpDomainControlLotpTrapEnable - sheErpDomainControlUlotpTrapEnable - sheErpDomainControlMultipleRmTrapEnable - sheErpDomainControlRmReachTrapEnable - sheErpDomainControlAlarmSeverityIndex activateErpDomain(827) - sheErpDomainControlDomainIndex - sheErpDomainControlProtectionActivation operatorRequestErpDomain(828) - sheErpDomainControlDomainIndex - sheErpDomainControlOperatorRequestrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.1 |
sheErpDomainControlStatusDescribes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of commandro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.2 |
sheErpDomainControlTimestampTime stamp attribute set at the end of a command.ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.3 |
sheErpDomainControlReqResultCommand result (error code) attribute.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.4 |
sheErpDomainControlTimerMaximum command execution time (timeout) in seconds in case of a long running command.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.5 |
sheErpDomainControlDomainIndexAn index value that uniquely identifies an ERP domain. parameter for - modifyErpDomainEntry - modifyErpDomainTraps - activateErpDomain - operatorRequestErpDomainrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.6 |
sheErpDomainControlDomainNameThe associated name of the ERP Domain. Spaces and other special characters (: o) are not allowed!! parameter for - modifyErpDomainEntryrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.7 |
sheErpDomainControlDomainPrimaryPortThe sheBridgePortIndex of the sheBridgePortTable that represents the primary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid). parameter for - modifyErpDomainEntryrw SheBridgePortIndexOrInvalid .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.8 |
sheErpDomainControlDomainSecondaryPortThe sheBridgePortIndex of the sheBridgePortTable that represents the secondary port of the ERP domain. The allowed range is 1-65535. Only Ethernet interfaces possible. The value -1 is used to indicate that it is unassigned (Invalid). parameter for - modifyErpDomainEntryrw SheBridgePortIndexOrInvalid .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.9 |
sheErpDomainControlWaitToRestoreTimeTime in seconds taken to verify that ring integrity is maintained before switch to Idle state after all links have recovered from Link Failure, Link Degrade or Loss of Test Packet. parameter for - modifyErpDomainEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.10 |
sheErpDomainControlTestPacketIntervalTime interval , in milliseconds, between consecutive transmission of test packets. The Test Packet Interval is used to define the time to initiate protection due to Loss of Test Packets, The value of Test Packet Interval is between 10 ms and 500 ms in 10 ms steps. parameter for - modifyErpDomainEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.11 |
sheErpDomainControlLearningDisabledTimeConfigures the time during which learning is disabled after a FDB flush. The learning is only disabled for the protected VLAN of the domain on the ERP ports. The value of the Learning Disabled Time is between 0 and 500 ms in steps of 10 ms. parameter for - modifyErpDomainEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.12 |
sheErpDomainControlProtectionActivationRepresents if ERP Protection activation is activated or deactivated. When the ERP domain is activated the ERP process will start running. All alarms/traps are cleared and the ERP protection state is reported as unknown. The domain will enter deactivated state. The ERP protection activation default value is deactivated. deny(0) - protection inactive permit(1) - protection active parameter for - activateErpDomainrw ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.13 |
sheErpDomainControlOperatorRequestTwo operators requests are possible for one ERP domain. For Normal nodes operator requests are ignored. manualToSecondary(1) - Manual Switch to Secondary port - This command enables to swap the roles of primary and secondary port on the RM Node. clear(2) - Clear - This command disables a previous Manual Switch to Secondary port. parameter for - operatorRequestErpDomainrw SheErpDomainOperatorRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.14 |
sheErpDomainControlDomainNodeModeAn ERP domain may operate in two modes. RM Node or Normal Node. The description of these two modes is included in ERP concept specification. Only one node per domain could be a rm node. normalNode(1) rmNode(2) parameter for - modifyErpDomainEntryrw SheErpNodeType .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.15 |
sheErpDomainControlDomainControlVlanRepresents the VLAN ID sheVlanIndex of the control VLAN of the domain. The control VLAN may not be used in other domains as control VLAN or as protected VLAN. The control VLAN must be a VLAN with a high priority QoS profile. parameter for - modifyErpDomainEntryrw SheVlanIdOrInvalid .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.16 |
sheErpDomainControlLotpTrapEnableErp domain Loss of Test Packet Trap. Configures sending OF LOTP traps when detected by the RM node. deny(0) permit(1) parameter for - modifyErpDomainEntryrw ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.17 |
sheErpDomainControlUlotpTrapEnableErp domain Unidirectional Loss of Test Packet Trap. Configures sending of ULOTP traps when detected by the RM node. deny(0) permit(1) parameter for - modifyErpDomainEntryrw ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.18 |
sheErpDomainControlMultipleRmTrapEnableErp domain multiple RM nodes Trap. Configures sending of MultipleRM traps when detected by the RM node. deny(0) permit(1) parameter for - modifyErpDomainEntryrw ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.19 |
sheErpDomainControlRmReachTrapEnableErp domain multiple failures trap. Configures sending of RMNodeReacheablility traps when detected by the normal node. deny(0) permit(1) parameter for - modifyErpDomainEntryrw ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.20 |
sheErpDomainControlAlarmSeverityIndexIndex to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per ERP domain. parameter for - modifyErpDomainEntryrw SheAlarmSevProfileIndex (SHE-ALARMING-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.2.21 |
sheErpDomainGlobalGroup OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.3 |
sheErpDomainGlobalMacLearningDelayEnable / disable the MAC learning delay globaly. Default: disable When this parameter is set to enable, ERP enhancement solution will be actived. ERP module will apply hardware MAC learning after FDB flush. if this parameter is set to disable, ERP module will work the same as before.ro SheEnableType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.3.1 |
sheErpDomainGlobalMacLearningDelayTimerConfigure the MAC learning delay time. Value range: 10~to be defined, the increasement granularity is 10 ms default: to be defined. This parameter specify how long the hardware MAC learning will last in condition that sheErpDomainMacLearningDelay is enabled.ro Unsigned32 UNITS "10 msec" .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.3.2 |
sheErpDomainGlobalControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4 |
sheErpDomainGlobalControlRequestA SetRequest on this attribute starts a command execution process in the NetElement. modifyErpDomainGlobalGroup(829) parameters: sheErpDomainGlobalMacLearningDelay sheErpDomainGolobalMacLearningDelayTimerrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4.1 |
sheErpDomainGlobalControlStatusDescribes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of commandro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4.2 |
sheErpDomainGlobalControlTimestampTime stamp attribute set at the end of a command.ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4.3 |
sheErpDomainGlobalControlReqResultCommand result (error code) attribute.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4.4 |
sheErpDomainGlobalControlTimerMaximum command execution time (timeout) in seconds in case of a long running command.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4.5 |
sheErpDomainGlobalControlMacLearningDelayEnable / disable the MAC learning delay globaly.rw SheEnableType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4.6 |
sheErpDomainGlobalControlMacLearningDelayTimerConfigure the MAC learning delay time.rw Unsigned32 UNITS "10 msec" .1.3.6.1.4.1.231.7.1.2.2.1.4.9.2.4.7 |
sheErpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.9.3 |
sheErpEvents OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1 |
sheErpDomainRingStatusChangeThis trap is set whenever there is a change in the erpDomainRingStatus. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.1 |
sheErpDomainNodeStatusChangeThis trap is set whenever there is a change in the erpDomainNodeStatus. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.2 |
sheErpDomainTrafficVlanModifiedMapping of ERP domains to traffic VLANs modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.3 |
sheErpDomainEntryModifiedERP domain entry modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.4 |
sheErpDomainProtectionModifiedThe ERP domain activation has been modified by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.5 |
sheErpDomainManualSwitchThe ERP domain RM node port swap has been modified by the operator. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.6 |
sheErpDomainGlobalGroupModifiedModify global parameters of ERP domain. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.1.7 |
sheErpAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2 |
sheErpDomainLotpAlmTrapLoss of TestPackets state change trap. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2.1 |
sheErpDomainUlotpAlmTrapUnidirectional Loss of TestPackets state change trap. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2.2 |
sheErpDomainMultipleRmAlmTrapMultiple RM state change trap. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2.3 |
sheErpDomainRmReachAlmTrapRm Node Unreacheable state change trap. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.9.3.2.4 |
sheErpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.9.100 |
sheErpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.1 |
sheErpComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.1.1 |
sheErpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.2 |
sheErpBaseGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.2.1 |
sheErpBaseControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.2.2 |
sheErpDomainGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.2.3 |
sheErpDomainControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.2.4 |
sheErpNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.9.100.2.5 |
sheBcsc OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.10 |
sheBcscTableThis table has one entry for each combination of port or vlan and traffic type where broadcast storm control has to be performed. SEQUENCE OF SheBcscEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.10.1 |
sheBcscEntrySpecifies per port or vlan and per traffic type the broadcast storm control parameters, i.e. how many packets/bits per second can be received. SheBcscEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1 |
sheBcscIndexPrimary key for the table.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.1 |
sheBcscTypeBroadcast storm control traffic type. 1 - Broadcast 2 - Multicast 3 - Destination Lookup Failure (unicast)ro SheBcscTrafficType .1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.2 |
sheBcscConfigScopeType of the controlled entity, defines the meaning of sheBcscConfigIndex. 1 - port 2 - vlanro SheBcscScopeType .1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.3 |
sheBcscConfigIndexIndex of the controlled entity. In case of port scope, it should be sheBridgePortIndex of the sheBridgePortTable and the allowed range is 1-65535. In case of vlan scope, it should be sheVlanIndex of the sheVlanTable and the allowed range is 1-4093.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.4 |
sheBcscThresholdTypeDefines the counter type, i.e. the meaning of the sheBcscThresholdValue. 1 - packets per second 2 - bytes per secondro SheBcscThresholdType .1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.5 |
sheBcscThresholdValueMaximum traffic amount of type sheBcscThresholdType. If the threshold of a traffic type is reached within the 1 second measuring interval, further traffic of that type is dropped during the next time period. The switch continues to monitor traffic on the port, and when the utilization level is below the threshold level, the type of traffic that was dropped is forwarded again during the next time period.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.6 |
sheBcscVendorSpecificFor some vendors, multicast address can be specified.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.7 |
sheBcscAlarmDebounceTimerThe minimum time between two alarm traps sent by the BSCS instance.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.8 |
sheBcscAlarmSeverityIndexIndex to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per BSCS instance.ro SheAlarmSevProfileIndex (SHE-ALARMING-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.10.1.1.9 |
sheBcscControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2 |
sheBcscControlRequestA SetRequest on this attribute starts a command execution process in the NetElement. 501 - createBcscEntry parameters: sheBcscControlType sheBcscControlConfigScope sheBcscControlConfigIndex sheBcscControlThresholdType sheBcscControlThresholdValue sheBcscControlVendorSpecific sheBcscControlAlarmDebounceTimer sheBcscControlAlarmSeverityIndex 502 - modifyBcscEntry parameters: sheBcscControlIndex sheBcscControlType sheBcscControlThresholdType sheBcscControlThresholdValue sheBcscControlVendorSpecific sheBcscControlAlarmDebounceTimer sheBcscControlAlarmSeverityIndex 503 - deleteBcscEntry parameters: sheBcscControlIndexrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.1 |
sheBcscControlStatusDescribes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of commandro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.2 |
sheBcscControlTimestampTime stamp attribute set at the end of a command.ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.3 |
sheBcscControlReqResultCommand result (error code) attribute.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.4 |
sheBcscControlTimerMaximum command execution time (timeout) in seconds in case of a long running command.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.5 |
sheBcscControlIndexPrimary key for the table, created by the NE. Parameter for 502 - modifyBcscEntry 503 - deleteBcscEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.6 |
sheBcscControlTypeBroadcast storm control traffic type. 1 - Broadcast 2 - Multicast 3 - Destination Lookup Failure (unicast) Parameter for 501 - createBcscEntry 502 - modifyBcscEntryrw SheBcscTrafficType .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.7 |
sheBcscControlConfigScopeType of the controlled entity, defines the meaning of sheBcscConfigIndex. 1 - port 2 - vlan Parameter for 501 - createBcscEntryrw SheBcscScopeType .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.8 |
sheBcscControlConfigIndexIndex of the controlled entity. In case of port scope, it should be sheBridgePortIndex of the sheBridgePortTable and the allowed range is 1-65535. In case of vlan scope, it should be sheVlanIndex of the sheVlanTable and the allowed range is 1-4093. Parameter for 501 - createBcscEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.9 |
sheBcscControlThresholdTypeDefines the counter type, i.e. the meaning of the sheBcscThresholdValue. 1 - packets per second 2 - bytes per second Parameter for 501 - createBcscEntry 502 - modifyBcscEntryrw SheBcscThresholdType .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.10 |
sheBcscControlThresholdValueMaximum traffic amount of type sheBcscThresholdType. If the threshold of a traffic type is reached within the 1 second measuring interval, further traffic of that type is dropped during the next time period. The switch continues to monitor traffic on the port, and when the utilization level is below the threshold level, the type of traffic that was dropped is forwarded again during the next time period. Parameter for 501 - createBcscEntry 502 - modifyBcscEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.11 |
sheBcscControlVendorSpecificFor some vendors, multicast address can be specified. Parameter for 501 - createBcscEntry 502 - modifyBcscEntryrw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.12 |
sheBcscControlAlarmDebounceTimerThe minimum time between two alarm traps sent by the BSCS instance. Parameter for 501 - createBcscEntry 502 - modifyBcscEntryrw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.13 |
sheBcscControlAlarmSeverityIndexIndex to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per BSCS instance. Parameter for 501 - createBcscEntry 502 - modifyBcscEntryrw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.10.2.14 |
sheBcscNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.10.3 |
sheBcscEvents OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.1 |
sheBcscEntryCreatedNew entry in the sheBcscTable has been created. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.1.1 |
sheBcscEntryModifiedExisting entry in the sheBcscTable has been modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.1.2 |
sheBcscEntryDeletedEntry in the sheBcscTable has been deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.1.3 |
sheBcscAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.2 |
sheBcscThresholdExceededMaximum traffic amount has reached threshold within the 1 second measuring interval, further traffic of that type is dropped during the next time period. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.10.3.2.1 |
sheBcscConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.10.100 |
sheBcscCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.10.100.1 |
sheBcscComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.10.100.1.1 |
sheBcscGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.10.100.2 |
sheBcscGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.10.100.2.1 |
sheBcscControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.10.100.2.2 |
sheBcscNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.10.100.2.3 |
sheMstpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11 |
sheMstpBase OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1 |
sheMstpBaseParam OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1 |
sheMstpBaseStatusEnable or disable spanning tree.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1.1 |
sheMstpBaseConfNameThe MST configuration determines to which MST region Spaces and other special characters (: o) are not allowed!! each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1.2 |
sheMstpBaseRevisionLevelThe MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The range of the revision number is 0 to 65535.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1.3 |
sheMstpBaseConfIdVlanIdListThe MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The sheMstpBridgeProtoParamTable holds 32 static profile entries of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. This octet String with 4096 octets maps VLANs to spanning tree protocol profiles: one octet containing the sheMstpBridgeProtoParamIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one spanning-tree instance at a time.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.1.4 |
sheMstpBaseControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2 |
sheMstpBaseControlRequestA SetRequest on this attribute starts a command execution process in the NetElement. - modifyMstpBaseStatus parameters: sheMstpBaseControlBaseStatus - modifyMstpBaseConfig parameters: sheMstpBaseControlConfName sheMstpBaseControlRevisionLevel - modifyMstpBaseConfIdVlanIdList parameters: sheMstpBaseControlConfIdVlanIdListrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.1 |
sheMstpBaseControlStatusDescribes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of commandro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.2 |
sheMstpBaseControlTimestampTime stamp attribute set at the end of a command.ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.3 |
sheMstpBaseControlReqResultCommand result (error code) attribute.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.4 |
sheMstpBaseControlTimerMaximum command execution time (timeout) in seconds in case of a long running command.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.5 |
sheMstpBaseControlBaseStatusEnable or disable spanning tree. parameter of - modifyMstpBaseStatusrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.6 |
sheMstpBaseControlConfNameThe MST configuration determines to which MST region Spaces and other special characters (: o) are not allowed!! each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. parameter of - modifyMstpBaseConfigrw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.7 |
sheMstpBaseControlRevisionLevelThe MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The range of the revision number is 0 to 65535. parameter of - modifyMstpBaseConfigrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.8 |
sheMstpBaseControlConfIdVlanIdListThe MST configuration determines to which MST region each switch belongs. The configuration includes the name of the region, the revision number, and the MST instance-to-VLAN assignment map. For two or more switches to be in the same MST region, they must have the same VLAN-to-instance mapping, the same configuration revision number, and the same name. The sheMstpBridgeProtoParamTable holds 32 static profile entries of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. This octet String with 4096 octets maps VLANs to spanning tree protocol profiles: one octet containing the sheMstpBridgeProtoParamIndex per VLAN. The octet number is the sheVlanIndex. You can assign a VLAN to only one spanning-tree instance at a time. parameter of - modifyMstpBaseConfIdVlanIdListrw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.1.2.9 |
sheMstp OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2 |
sheMstpBridgeProtoParamTableOne table entry holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. The table has 32 static entries. SEQUENCE OF SheMstpBridgeProtoParamEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1 |
sheMstpBridgeProtoParamEntryOne table entry holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. The table has 32 static entries. Note that each MST region can only support up to 16 spanning-tree instances. SheMstpBridgeProtoParamEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1 |
sheMstpBridgeProtoParamIndexThe primary key for the table. One table entry holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. The table has 32 static entries.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.1 |
sheMstpBridgeProtoParamBridgeIdEach switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.2 |
sheMstpBridgeProtoParamBridgePriorityEach switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability. The configured value for the MstpBridgeProtoParamPriority should be completed by a fixed offsett, depending on the Mstp-Instance ID. That means, a configured priority-value of 4097 is valid for Mstp instance 1. Instance 2 will use 4098 in that case and instance 32 will have a MstpBridgeProtoParamPriority of 4128. Default value should be 32769 for MSTP-Instance 1 and 32800 for instance 32.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.3 |
sheMstpBridgeProtoParamTcTimeThe time since the last topology change.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.4 |
sheMstpBridgeProtoParamTcCountThe total number of topology changes detected by this bridge since the management entity was last reset or initialized.ro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.5 |
sheMstpBridgeProtoParamTcA topology change has been detected.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.6 |
sheMstpBridgeProtoParamDesignatedRootOne switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.7 |
sheMstpBridgeProtoParamRootPortA root port is selected for each switch (except the root switch). This port provides the best path (lowest cost) when the switch forwards packets to the root switch. The designated port to the root bridge, identified by the sheBridgePortIndex.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.8 |
sheMstpBridgeProtoParamRootPathCostThe shortest distance to the root switch is calculated for each switch based on the path cost. Costs for the designated path to the root switch as seen from this switch.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.1.1.9 |
sheMstpPortParamTableThe table holds the MSTP parameters on a per-port basis. The first key is a pointer to the MSTP profile equal to sheMstpBridgeProtoParamIndex (32 static entries). The second key is a pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports. SEQUENCE OF SheMstpPortParamEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2 |
sheMstpPortParamEntryThe table holds the MSTP parameters on a per-port basis. A free running index is used as key. There is a pointer to the MSTP profile equal to sheMstpBridgeProtoParamIndex (32 static entries). There is a seconde pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports. SheMstpPortParamEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1 |
sheMstpPortParamTableIndexA free running simple table index.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.1 |
sheMstpPortParamProtoIndexThe MSTP profile, the table entry is related to, is the first key of the table. This object points to the sheMstpBridgeProtoParamTable (same as sheMstpBridgeProtoParamIndex).ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.2 |
sheMstpPortParamPortIndexThe port, the table entry is related to, is the second key of the table. This object points to the sheBridgePortTable (same as sheBridgePortIndex).ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.3 |
sheMstpPortParamUpTimeThe total time the port was in the forwarding state since the management entity was last reset or initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.4 |
sheMstpPortParamStateEach Layer 2 interface on a switch using spanning tree exists in one of these states: Blocking: The interface does not participate in frame forwarding. Listening: The first transitional state after the blocking state when the spanning tree determines that the interface should participate in frame forwarding. Learning: The interface prepares to participate in frame forwarding. Forwarding: The interface forwards frames. Disabled: The interface is not participating in spanning tree because of a shutdown port, no link on the port, or no spanning-tree instance running on the port.ro SheMstpPortParamStateType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.5 |
sheMstpPortParamPortIdThe parameter consists of two parts. One part bears a fixed relationship to the physical or logical support of the Port by real-world equipment; this part assures the uniqueness of the Port Identifier among the Ports of a single Bridge, and is a small integer assigned by the NE in the range from one upwards. The other part of the parameter allows adjustment of the priority of the Port and is taken as the more significant part in priority comparisons. The priority part of this parameter can be updated by management.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.6 |
sheMstpPortParamPortPriorityWhen two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.7 |
sheMstpPortParamAdminPathCostWhen two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 0 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.8 |
sheMstpPortParamDesignatedRootOne switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.9 |
sheMstpPortParamDesignatedBridgeA designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.10 |
sheMstpPortParamDesignatedPortThe port identifier of the port that transmitted a BPDU to me.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.11 |
sheMstpPortParamDesignatedCostA designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Costs for the designated path to the designated switch.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.12 |
sheMstpPortParamPortRoleThe RSTP provides rapid convergence of the spanning tree by assigning one of these port roles to individual ports and by determining the active topology. Root port Provides the best path (lowest cost) when the switch forwards packets to the root switch. Designated port Connects to the designated switch, which incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Alternate port Offers an alternate path toward the root switch to that provided by the current root port. Backup port Acts as a backup for the path provided by a designated port toward the leaves of the spanning tree. A backup port can exist only when two ports are connected together in a loopback by a point-to-point link or when a switch has two or more connections to a shared LAN segment. Disabled port Has no role within the operation of the spanning tree. A port with the root or a designated port role is included in the active topology. A port with the alternate or backup port role is excluded from the active topology.ro SheMstpPortParamPortRoleType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.13 |
sheMstpPortParamCurrentPathCostThese value represent the current pathcost value for this port.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.2.1.14 |
sheMstpControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3 |
sheMstpControlRequestA SetRequest on this attribute starts a command execution process in the NetElement. sheMstpBridgeProtoParamTable - resetMstpTc parameters: sheMstpControlBridgeProtoParamIndex - modifyMstpBridgeParamEntry parameters: sheMstpControlBridgeProtoParamIndex sheMstpControlBridgeProtoParamBridgePriority sheMstpPortParamTable - modifyMstpPortParamEntry parameters: sheMstpControlPortParamTableIndex sheMstpControlPortParamPortPriority sheMstpControlPortParamAdminPathCostrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.1 |
sheMstpControlStatusDescribes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of commandro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.2 |
sheMstpControlTimestampTime stamp attribute set at the end of a command.ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.3 |
sheMstpControlReqResultCommand result (error code) attribute.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.4 |
sheMstpControlTimerMaximum command execution time (timeout) in seconds in case of a long running command.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.5 |
sheMstpControlBridgeProtoParamIndexSelects a table entry that holds a profile of spanning tree protocol parameters. A profile can be used on a per-VLAN basis. Parameter for - resetMstpTc - modifyMstpBridgeParamEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.6 |
sheMstpControlBridgeProtoParamBridgePriorityEach switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability. Parameter for - modifyMstpBridgeParamEntryrw Unsigned32 UNITS "multiple of 4096 + Mstp-Instance ID" .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.7 |
sheMstpControlPortParamTableIndexA free running simple table index.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.8 |
sheMstpControlPortParamPortPriorityWhen two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority. parameter for - modifyMstpPortParamEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.9 |
sheMstpControlPortParamAdminPathCostWhen two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 0 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system. parameter for - modifyMstpPortParamEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.2.3.10 |
sheCist OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3 |
sheCistBridgeProtoParam OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1 |
sheCistBridgeProtoParamBridgeIdEach switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.1 |
sheCistBridgeProtoParamBridgePriorityEach switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.2 |
sheCistBridgeProtoParamTcTimeThe time since the last topology change.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.3 |
sheCistBridgeProtoParamTcCountThe total number of topology changes detected by this bridge since the management entity was last reset or initialized.ro Counter32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.4 |
sheCistBridgeProtoParamTcA topology change has been detected.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.5 |
sheCistBridgeProtoParamDesignatedRootOne switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.6 |
sheCistBridgeProtoParamRootPortA root port is selected for each switch (except the root switch). This port provides the best path (lowest cost) when the switch forwards packets to the root switch. The designated port to the root bridge, identified by the sheBridgePortIndex.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.7 |
sheCistBridgeProtoParamRootPathCostThe shortest distance to the root switch is calculated for each switch based on the path cost. Costs for the designated path to the root switch as seen from this switch.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.8 |
sheCistBridgeProtoParamMaxAgeThe maximum age of spanning tree protocol information learned from the network on any port before it is discarded (time a bridge port saves its configuration BPDU information), in units of hundredths of a second. This is the actual value that this bridge is currently using. This is 20 seconds by default and can be tuned to be between six and 40 seconds.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.9 |
sheCistBridgeProtoParamHoldTimeThis time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.ro Unsigned32 UNITS "10 ms" .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.10 |
sheCistBridgeProtoParamForwardDelayThis time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] This is by default equal to 15 seconds, but can be tuned to be between four and 30 seconds.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.11 |
sheCistBridgeProtoParamBridgeMaxAgeThe value that all bridges use for MaxAge when this bridge is acting as the root in units of hundredths of a second. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.12 |
sheCistBridgeProtoParamBridgeHelloTimeThe value that all bridges use for HelloTime when this bridge is acting as the root in units of hundredths of a second. The hello time is the time between each Bridge Protocol Data Unit (BPDU) that is sent on a port. This is equal to two seconds by default, but can be tuned to be between one and ten seconds. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.13 |
sheCistBridgeProtoParamBridgeForwardDelayThe value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of BridgeMaxAge. This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. This is by default equal to 15 seconds, but can be tuned to be between four and 30 seconds.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.14 |
sheCistBridgeProtoParamForceVerWhen RSTP is configuring or reconfiguring the network, there is an increased and implementation dependent probability that frames that are in transit will be misordered or duplicated as network paths change, since a Bridge can buffer frames awaiting transmission through its Ports. Some LAN protocols, for example, LLC Type 2, are particularly sensitive to frame misordering and duplication; to support these the Force Protocol Version parameter can be used to delay the transition of ports to a Forwarding state and further reduce the probability of such events. The Force Protocol Version parameter for the Bridge can take the value 0 (STP Compatibility mode),2 (the default, normal operation) or 3 (MSTP Compatibility).ro SheCistBridgeProtoParamForceVerType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.15 |
sheCistBridgeProtoParamRegionalRootIdOne switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.16 |
sheCistBridgeProtoParamRegionalRootPathCostThe shortest distance to the root switch is calculated for each switch based on the path cost. Costs for the designated path to the root switch as seen from this switch.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.17 |
sheCistBridgeProtoParamMaxHopsNumber of possible hops in the region. Only used if forcedVersion = mstp(3).ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.18 |
sheCistBridgeProtoParamSelfLoopDetectEnable/Disable the stp self loop detection.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.1.19 |
sheCistPortParamTableThe table holds the CIST parameters on a per-port basis. The key is a pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports. SEQUENCE OF SheCistPortParamEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3 |
sheCistPortParamEntryThe table holds the CIST parameters on a per-port basis. The key is a pointer to the port equal to sheBridgePortIndex. There is a static entry for every possible MSTP port. That means 8 Ethernet uplink interfaces with redundundancy or 4 Ethernet uplink interfaces without redundundancy + 2 LAG ports. SheCistPortParamEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1 |
sheCistPortParamIndexThat is the sheBridgePortIndex of the corresponding BridgePort.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.1 |
sheCistPortParamUpTimeThe total time the port was in the forwarding state since the management entity was last reset or initialized.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.2 |
sheCistPortParamStateEach Layer 2 interface on a switch using spanning tree exists in one of these states: Blocking: The interface does not participate in frame forwarding. Listening: The first transitional state after the blocking state when the spanning tree determines that the interface should participate in frame forwarding. Learning: The interface prepares to participate in frame forwarding. Forwarding: The interface forwards frames. Disabled: The interface is not participating in spanning tree because of a shutdown port, no link on the port, or no spanning-tree instance running on the port.ro SheMstpPortParamStateType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.3 |
sheCistPortParamPortIdThe parameter consists of two parts. One part bears a fixed relationship to the physical or logical support of the Port by real-world equipment; this part assures the uniqueness of the Port Identifier among the Ports of a single Bridge, and is a small integer assigned by the NE in the range from one upwards. The other part of the parameter allows adjustment of the priority of the Port and is taken as the more significant part in priority comparisons. The priority part of this parameter can be updated by management.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.4 |
sheCistPortParamPortPriorityWhen two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.5 |
sheCistPortParamAdminPathCostWhen two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 1 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.6 |
sheCistPortParamDesignatedRootOne switch in the network is elected as the root switch of the spanning tree by the Spanning Tree Protocol. The unique 8-byte bridge identifier (bridge ID) of the designated root switch as executed by this node. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.7 |
sheCistPortParamDesignatedCostA designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Costs for the designated path to the designated switch.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.8 |
sheCistPortParamDesignatedBridgeA designated switch for each LAN segment is selected. The designated switch incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.9 |
sheCistPortParamDesignatedPortThe port identifier of the port that transmitted a BPDU to me.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.10 |
sheCistPortParamTcAckA boolean. Set if a Configuration Message with a topology change acknowledge flag set is to be transmitted.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.11 |
sheCistPortParamAdminEdgePortPort can be configured to be an edge port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.12 |
sheCistPortParamOperEdgePortIf port is configured to be an edge port, in the absence of a received BPDU, this port is identified as an operEdgePort.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.13 |
sheCistPortParamMacEnabledThe value of this parameter is TRUE if use of the MAC entity is permitted; and is otherwise FALSE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.14 |
sheCistPortParamMacOperationalThe value of this parameter is TRUE if the MAC entity is in a functioning state; i.e., the MAC entity can be used to transmit and/or receive frames, and its use is permitted by management. Its value is otherwise FALSE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.15 |
sheCistPortParamAdminPointToPointMacThis parameter can take three values: a) ForceTrue. The administrator requires the MAC to be treated as if it is connected to a point-to-point LAN. b) ForceFalse. The administrator requires the MAC to be treated as connected to a non-point-to-point LAN. c) Auto. The administrator requires the point-to-point status of the MAC to be determined by specific MAC procedures.ro SheCistAdminPTPMacType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.16 |
sheCistPortParamOperPointToPointMacTRUE, if the MAC is connected to a point-to-point LAN, otherwise FALSE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.17 |
sheCistPortParamRegionalRootIdThe CIST Regional Root is the bridge of this region that has the lowest External Root Path Cost through a Boundary Port.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.18 |
sheCistPortParamRegionalRootPathCostPath cost to the CIST Regional Root, the bridge of this region that has the lowest External Root Path Cost through a Boundary Port.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.19 |
sheCistPortParamPortHelloTimeThe hello time actual used by that port.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.20 |
sheCistPortParamHelloTimeThe time interval between the generation of Configuration BPDUs by the Root.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.21 |
sheCistPortParamPortRoleThe RSTP provides rapid convergence of the spanning tree by assigning one of these port roles to individual ports and by determining the active topology. Root port Provides the best path (lowest cost) when the switch forwards packets to the root switch. Designated port Connects to the designated switch, which incurs the lowest path cost when forwarding packets from that LAN to the root switch. The port through which the designated switch is attached to the LAN is called the designated port. Alternate port Offers an alternate path toward the root switch to that provided by the current root port. Backup port Acts as a backup for the path provided by a designated port toward the leaves of the spanning tree. A backup port can exist only when two ports are connected together in a loopback by a point-to-point link or when a switch has two or more connections to a shared LAN segment. Disabled port Has no role within the operation of the spanning tree. A port with the root or a designated port role is included in the active topology. A port with the alternate or backup port role is excluded from the active topology.ro SheMstpPortParamPortRoleType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.22 |
sheCistPortParamCurrentPathCostThe current path costro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.23 |
sheCistPortParamLoopDetectThe current loop detect state. Note: Only supported by hix5608 R1.3!!ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.3.1.24 |
sheCistControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4 |
sheCistControlRequestA SetRequest on this attribute starts a command execution process in the NetElement. sheCistBridgeProtoParam - resetCistTc parameters: 'no' - modifyCistBridgeParameters parameters: sheCistControlBridgeProtoParamBridgePriority sheCistControlBridgeProtoParamBridgeMaxAge sheCistControlBridgeProtoParamBridgeHelloTime sheCistControlBridgeProtoParamBridgeForwardDelay sheCistControlBridgeProtoParamForceVer sheCistControlBridgeProtoParamMaxHops sheCistControlBridgeProtoParamSelfLoopDetect sheCistPortParamTable - modifyCistPortParamEntry parameters: sheCistControlPortParamIndex sheCistControlPortParamPortPriority sheCistControlPortParamAdminPathCost sheCistControlPortParamAdminEdgePort sheCistControlPortParamMacEnabled sheCistControlPortParamAdminPointToPointMacrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.1 |
sheCistControlStatusDescribes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of commandro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.2 |
sheCistControlTimestampTime stamp attribute set at the end of a command.ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.3 |
sheCistControlReqResultCommand result (error code) attribute.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.4 |
sheCistControlTimerMaximum command execution time (timeout) in seconds in case of a long running command.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.5 |
sheCistControlBridgeProtoParamBridgePriorityEach switch has an unique 8-byte bridge identifier (bridge ID), which determines the selection of the root switch. The two most-significant bytes are used for the switch priority, and the remaining six bytes are derived from the switch base MAC address. When you change the switch priority value, you change the probability that the switch will be elected as the root switch. Configuring a higher value decreases the probability; a lower value increases the probability. parameter for - modifyCistBridgeParametersrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.6 |
sheCistControlBridgeProtoParamBridgeMaxAgeThe value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. parameter for - modifyCistBridgeParametersrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.7 |
sheCistControlBridgeProtoParamBridgeHelloTimeThe value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. parameter for - modifyCistBridgeParametersrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.8 |
sheCistControlBridgeProtoParamBridgeForwardDelayThe value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. parameter for - modifyCistBridgeParametersrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.9 |
sheCistControlBridgeProtoParamForceVerWhen RSTP is configuring or reconfiguring the network, there is an increased and implementation dependent probability that frames that are in transit will be misordered or duplicated as network paths change, since a Bridge can buffer frames awaiting transmission through its Ports. Some LAN protocols, for example, LLC Type 2, are particularly sensitive to frame misordering and duplication; to support these the Force Protocol Version parameter can be used to delay the transition of ports to a Forwarding state and further reduce the probability of such events. The Force Protocol Version parameter for the Bridge can take the value 0 (STP Compatibility mode),2 (the default, normal operation). Third version is Mstp compatibility.rw SheCistBridgeProtoParamForceVerType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.10 |
sheCistControlBridgeProtoParamMaxHopsNumber of possible hops in the region. Only used if forcedVersion = mstp(3).rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.11 |
sheCistControlBridgeProtoParamSelfLoopDetectEnable/Disable the stp self loop detection.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.12 |
sheCistControlPortParamIndexIndex of the sheCistPortParamTable entry to be modified. parameter for - modifyCistPortParamEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.13 |
sheCistControlPortParamPortPriorityWhen two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The port priority value represents the location of an interface in the network topology and how well it is located to pass traffic. For priority, the range is 0 to 240. The default is 128. The lower the number, the higher the priority. parameter for - modifyCistPortParamEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.14 |
sheCistControlPortParamAdminPathCostWhen two interfaces on a switch are part of a loop, the spanning-tree port priority and path cost settings determine which interface is put in the forwarding state and which is put in the blocking state. The path cost value represents media speed. A lower path cost represents higher-speed transmission. For cost, the range is 1 to 200000000; the default value is derived from the media speed of the interface. 1000 Mbps: 4. 100 Mbps: 19. 10 Mbps: 100. 0 means auto selection by the system. parameter for - modifyCistPortParamEntryrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.15 |
sheCistControlPortParamAdminEdgePortPort can be configured to be an edge port. parameter for - modifyCistPortParamEntryrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.16 |
sheCistControlPortParamMacEnabledThe value of this parameter is TRUE if use of the MAC entity is permitted; and is otherwise FALSE. parameter for - modifyCistPortParamEntryrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.17 |
sheCistControlPortParamAdminPointToPointMacThis parameter can take three values: a) ForceTrue. The administrator requires the MAC to be treated as if it is connected to a point-to-point LAN. b) ForceFalse. The administrator requires the MAC to be treated as connected to a non-point-to-point LAN. c) Auto. The administrator requires the point-to-point status of the MAC to be determined by specific MAC procedures. parameter for - modifyCistPortParamEntryrw SheCistAdminPTPMacType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.3.4.18 |
sheMstpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11.4 |
sheMstpBaseConfigModifiedMSTP base parameters has been modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.1 |
sheMstpBaseConfIdVlanIdListModifiedMSTP instance to VLAN ID mapping has been modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.2 |
sheMstpBridgeTcResetMstp topology change detection flag has been reset. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.3 |
sheMstpBridgeParamEntryModifiedMstp bridge parameter entry has been modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.4 |
sheMstpPortParamEntryModifiedMstp port parameter entry has been modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.5 |
sheCistBridgeTcResetCist topology change detection flag has been reset. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.6 |
sheCistBridgeParamModifiedCist bridge parameters have been modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.7 |
sheCistPortParamEntryModifiedCist port parameter entry has been modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.8 |
sheMstpPortBridgeGroupAddressChangedMSTP's bridge group address has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.9 |
sheMstpBaseConfigReqResultTrapConfiguration end trap for long running commands. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.10 |
sheMstpControlReqResultTrapConfiguration end trap for long running commands. Index parameters are used according controlrequest value - otherwise don't care. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.11 |
sheCistControlReqResultTrapConfiguration end trap for long running commands. Index parameters are used according controlrequest value - otherwise don't care. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.11.4.12 |
sheMstpPort OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11.6 |
sheMstpPortTableThe sheMstpPortTable holds a parameter related to overall MSTP protocol such as Bridge Group Address per port. The key is a pointer to the port equal to sheBridgePortIndex. SEQUENCE OF SheMstpPortEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.1 |
sheMstpPortEntryEntry of the sheMstpPortTable. SheMstpPortEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.1.1 |
sheMstpPortBridgeGroupAddressMSTP bridge group Address to be used for the port.ro SheMstpPortControlBridgeGroupAddress .1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.1.1.1 |
sheMstpPortControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2 |
sheMstpPortControlRequestsetMstpPortBridgeGroupAddress : sheMstpPortControlPortIndex sheMstpPortControlBridgeGroupAddressrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.1 |
sheMstpPortControlStatusThe status of a control requestro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.2 |
sheMstpPortControlTimerThe maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.3 |
sheMstpPortControlReqResultThe result of the last user command.ro SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.4 |
sheMstpPortControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.5 |
sheMstpPortControlPortIndexThis object points to the sheBridgePortTable (same as sheBridgePortIndex).rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.6 |
sheMstpPortControlBridgeGroupAddressMSTP bridge group address to be used for the port.rw SheMstpPortControlBridgeGroupAddress .1.3.6.1.4.1.231.7.1.2.2.1.4.11.6.2.7 |
sheMstpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11.100 |
sheMstpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.1 |
sheMstpComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.1.1 |
sheMstpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2 |
sheMstpBaseParamGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.1 |
sheMstpBaseControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.2 |
sheMstpBridgeParamGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.3 |
sheMstpPortParamGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.4 |
sheMstpControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.5 |
sheCistBridgeParamGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.6 |
sheCistPortParamGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.7 |
sheCistControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.8 |
sheMstpNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.11.100.2.9 |
sheArp OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12 |
sheArpBase OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.1 |
sheArpBroadcastFloodPermissionThat is the so called China-Bit. ARP request broadcast messages received at the network interface (downstream) are either sent to each subscriber (flooding) or instead are dropped and answered by the NE itself through an ARP reply agent. Default is flooding permitted. deny (0) permit (1)ro ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.12.1.1 |
sheArpControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.2 |
sheArpControlRequestA SetRequest on this attribute starts a command execution process in the NetElement. 801 - changeArpHandling parameters: sheArpControlBroadcastFloodPermissionrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.1 |
sheArpControlStatusDescribes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of commandro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.2 |
sheArpControlTimestampTime stamp attribute set at the end of a command.ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.3 |
sheArpControlReqResultCommand result (error code) attribute.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.4 |
sheArpControlTimerMaximum command execution time (timeout) in seconds in case of a long running command.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.5 |
sheArpControlBroadcastFloodPermissionThat is the so called China-Bit. ARP request broadcast messages received at the network interface (downstream) are either sent to each subscriber (flooding) or instead are dropped and answered by the NE itself through an ARP reply agent. Default is flooding permitted. deny (0) permit (1) Parameter for 801 - changeArpHandlingrw ShePermissionType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.12.2.6 |
sheArpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.3 |
sheArpBroadcastFloodPermissionModifiedsheArpControlFloodPermission has been modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.12.3.2 |
sheArpFixedIpAddressTableEntryCreatedsheArpFixedIpAddressTableEntry created. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.12.3.3 |
sheArpFixedIpAddressTableEntryModifiedsheArpFixedIpAddressTableEntry modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.12.3.4 |
sheArpFixedIpAddressTableEntryDeletedsheArpFixedIpAddressTableEntry deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.12.3.5 |
sheArpFixedIpAddressTableA set of fixed IP-Addresses for the ARP-Replay-Agent. There are two restrictions for the amount of possible IpAddresses on subscriber ports. One per bridgePort via sheBridgePortIpAddressPermitCount and one per UNI port via sheBridgeBaseMaxIpUNI parameter (global for NE), which could never exceeded. Remark this if more then one bridgePort is used on a single UNI port. Note: Currently, the SHE system support only 1 fixed IP address configuration per Bridgeport. For that reason, the NE will always use the configured Bridgeport index also as selected value for the tableindex sheArpFixedIpAddressIndex. The number of fixed addresses could be expanded in future releases, but such changes maybe force an index change for this table. SEQUENCE OF SheArpFixedIpAddressEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.12.5 |
sheArpFixedIpAddressEntryOn entry consist of an Index ,one configured IP-Address, the bridgePortIndex of the configured port and the assoiated learned mac-address. Index for the Entry are the sheArpFixedIpAddressIndex. SheArpFixedIpAddressEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1 |
sheArpFixedIpAddressIndexA free running index for this table.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.1 |
sheArpFixedIpAddressBridgePortIndexThe index of the bridgePort were this Ip-Address is configured for.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.2 |
sheArpFixedIpAddressA configured fixed ip-address. Note: There is an additional restriction of possible IpAddresses per UNI port which could never exceeded. Remark this if more then one bridgePort is used on a single UNI port.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.3 |
sheArpFixedIpAddressLearnedMacThe learned mac-address for this ipAddress-entry.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.4 |
sheArpFixedIpAntiSpoofingStatus0-inactive: IP Anti-spoofing Disabled. Or in case that an IP Anti-spoofing is enabled but the setting to the line card is failed. 1- active: IP Anti-spoofing is enabled and the setting to the line card is successful.ro SheArpFixedIpAntiSpoofingStatusType .1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.5 |
sheArpFixedIpAddressInnerVlanTagThe inner vlan tag, where this configured fixed ip address should be valid on the bridgeport. This configuration is needed for IpAs feature and the ARP relay agent. 0 could be used as wildcard configuration but the feature of use the same IP in different Vlan's is not available in that case. New parameter with R2.8.ro Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.6 |
sheArpFixedIpAddressOuterVlanTagThe outer vlan tag, where this configured fixed ip address should be valid on the bridgeport. This configuration is needed for IpAs feature and the ARP relay agent. 0 could be used as wildcard configuration but the feature of use the same IP in different Vlan's is not available in that case. New parameter with R2.8.ro Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.12.5.1.7 |
sheArpFixedIpAddressControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.6 |
sheArpFixedIpAddressControlRequestA SetRequest on this attribute starts a command execution process in the NetElement. 802 - createArpFixedIpAddressEntry parameters: sheArpFixedIpAddressControlBridgePortIndex sheArpFixedIpAddressControlAddress sheArpFixedIpAddressControlInnerVlanTag (new with R2.8) sheArpFixedIpAddressControlOuterVlanTag (new with R2.8) 803 - modifyArpFixedIpAddressEntry parameters: sheArpFixedIpAddressControlIndex sheArpFixedIpAddressControlBridgePortIndex sheArpFixedIpAddressControlAddress sheArpFixedIpAddressControlInnerVlanTag (new with R2.8) sheArpFixedIpAddressControlOuterVlanTag (new with R2.8) 804 - deleteArpFixedIpAddressEntry parameters: sheArpFixedIpAddressControlIndexrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.1 |
sheArpFixedIpAddressControlIndexThe index of the table-entry to be configured.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.2 |
sheArpFixedIpAddressControlStatusDescribes the status of a user command group, used for block commands while a command execution is in process. Values : idle, busy, passed, failed. idle: default, no command in process busy: command execution in process, attempts to start another user command on this control block are rejected passed/failed: status at end of commandro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.3 |
sheArpFixedIpAddressControlTimestampTime stamp attribute set at the end of a command.ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.4 |
sheArpFixedIpAddressControlReqResultCommand result (error code) attribute.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.5 |
sheArpFixedIpAddressControlTimerMaximum command execution time (timeout) in seconds in case of a long running command.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.6 |
sheArpFixedIpAddressControlBridgePortIndexLook at table.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.7 |
sheArpFixedIpAddressControlAddresslook at table.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.8 |
sheArpFixedIpAddressControlInnerVlanTaglook at table. New parameter with R2.8.rw Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.9 |
sheArpFixedIpAddressControlOuterVlanTaglook at table. New parameter with R2.8.rw Integer32 (0 | 1..4093) .1.3.6.1.4.1.231.7.1.2.2.1.4.12.6.10 |
sheDhcpSnoop OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7 |
sheDhcpSnoopingTablelook at table. SEQUENCE OF SheDhcpSnoopingEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1 |
sheDhcpSnoopingEntryOne entry for every existing client for a bridgePort. SheDhcpSnoopingEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1 |
sheDhcpSnoopingBridgePortIndexBridgePortIndex from bridgePortTable.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1.1 |
sheDhcpSnoopingIpAddressA client-assigned IP address from Dhcp serverro IpAddress .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1.2 |
sheDhcpSnoopingMacAddressA client's Mac addressro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1.3 |
sheDhcpSnoopingRemainingTimeRemaining time until the lease time to the IP address is overro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1.4 |
sheIpAntiSpoofingStatus0-inactive: IP Anti-spoofing Diabled. Or in case that an IP Anti-spoofing is enabled but the setting to the line card is failed. 1- active: IP Anti-spoofing is enabled and the setting to the line card is successful.ro SheIpAntiSpoofingStatusType .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1.5 |
sheDhcpSnoopingVlanIdVlanIndex from VlanTable. This show which VLAN the client uses.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.1.1.6 |
sheDhcpSnoopControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2 |
sheDhcpSnoopControlRequestdeleteSnoopEntry(706), - it deletes a DHCP Snoop Entry as an ADMIN account. parameters: sheDhcpSnoopControlRequest sheDhcpSnoopControlBridgePortIndex sheDhcpSnoopControlIpAddress sheDhcpSnoopControlVlanId ipAntiSpoofingSet(707), - it enables or diables an IP Anti-spoofing at NE. parameters: sheDhcpSnoopControlRequest sheIpAntiSpoofingControlEnable ipAntiSpoofingGracePeriodSet(708) - it sets a grace period when enabling an IP Anti-Spoofing. parameters: sheDhcpSnoopControlRequest sheIpAntiSpoofingControlGracePeriodrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.1 |
sheDhcpSnoopControlStatusro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.2 |
sheDhcpSnoopControlTimerWait time for the manager on long lasting commandsro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.3 |
sheDhcpSnoopControlTimeStampTime stamp attribute set at the end of a commandro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.4 |
sheDhcpSnoopControlReqResultResult of the last commandro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.5 |
sheDhcpSnoopControlBridgePortIndexA BridgePort Index to delete from table.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.6 |
sheDhcpSnoopControlIpAddressThe IP address of the snoop entry to deleterw IpAddress .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.7 |
sheIpAntiSpoofingControlEnableTrue : Enable False : Disable Note for R2.8: There is an additional per bridgeport configuration for IpAs with R2.8 available (sheBridgePortIpAsMode), which will be outvoted by this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.8 |
sheIpAntiSpoofingControlGracePeriodIt is a wait time for retrieving an IP address from DHCP Server. It prevents clients from not being set from DHCP and finally being dropped when setting an IP Anti-Spoofing Enable.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.9 |
sheDhcpSnoopControlVlanIdVlanIndex from VlanTable. This show which VLAN the client uses.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.2.10 |
sheIpAntiSpoofingInfo OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.3 |
sheIpAntiSpoofingEnableThis configuration enable/disable the IpAs feature for all subscriber ports of the NE. True : Enable False : Disable Bridgeports on IU cards with wintegra chipset will not check any Vlan dependencies. If this switch was enabled', only cards with convergate chipset will made check for the triple Ip-innerTag-OuterTag. Note for R2.8: There is an additional per bridgeport configuration for IpAs with R2.8 available (sheBridgePortIpAsMode), which will be outvoted by this configuration if set to 'enable'. The configuration of the valid triple Ip-InnerTag-OuterTag will be done via DHCP or StaticIpAddress configuration.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.3.1 |
sheIpAntiSpoofingGracePeriodIt is a wait time for retrieving an IP address from DHCP Server. It prevents clients from not being set from DHCP and finally being dropped when setting an IP Anti-Spoofing Enable.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.3.2 |
sheIpAntiSpoofingRemainingTimeAfter user sets up an IP Anti-Spoofing, there is some interval until this function is actually adjusted to a LineCard. It is called GracePeriod. This attruibute indicates the remaining time of real adjustment.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.3.3 |
sheIpAntiSpoofingNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4 |
sheIpAntiSpoofingEvents OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4.1 |
sheIpAntiSpoofingChangedIt notifies that the Ip Anti-Spoofing setting is changed. If sheIpAntiSpoofingEnableis True, it indicates IP Anti-Spoofing Enable. If sheIpAntiSpoofingEnable is False, it means IP Anti-Spoofing Disable. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4.1.1 |
sheIpAntiSpoofingGracePeriodChangedIt notifies that GracePeriod of IpAnti-Spoofing is modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4.1.2 |
sheDhcpSnoopingEntryDeletedIt notifies that the requested DhcpSnooping Entry was deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.12.7.4.1.3 |
sheArpVlanTableEach entry in this table describe an arp flood policy based on vlan. SEQUENCE OF SheArpVlanEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.12.8 |
sheArpVlanEntryentry of the table SheArpVlanEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.12.8.1 |
sheArpVlanFloodFlagarp forward policy flag.ro SheArpVlanFloodType .1.3.6.1.4.1.231.7.1.2.2.1.4.12.8.1.1 |
sheArpVlanControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.9 |
sheArpVlanControlRequestcommand to control the sheArpVlanTable. the valid command should be: modifyArpVlanFlood(901): sheArpVlanControlVlanId sheArpVlanControlFloodFlagrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.1 |
sheArpVlanControlStatusThe status of a control request.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.2 |
sheArpVlanControlTimerThe maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the SHE.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.3 |
sheArpVlanControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.4 |
sheArpVlanControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.5 |
sheArpVlanControlVlanIdVLAN ID which is controlled for ARP flooding.rw INTEGER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.6 |
sheArpVlanControlFloodFlagArp foward policy. enable: flood ARP packets, disable: do not flood ARP packetsrw SheArpVlanFloodType .1.3.6.1.4.1.231.7.1.2.2.1.4.12.9.7 |
sheArpVlanNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.10 |
sheArpVlanFloodModifiedARP flooding policy for a VLAN has been modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.12.10.1 |
sheArpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.100 |
sheArpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.1 |
sheArpComplianceThe compliance statement for the ARP MIB. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.1.1 |
sheArpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2 |
sheArpBaseGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.1 |
sheArpControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.2 |
sheArpNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.3 |
sheArpFixedIpAddressGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.4 |
sheArpFixedIpAddressControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.5 |
sheDhcpSnoopingGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.6 |
sheDhcpSnoopingControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.7 |
sheDhcpSnoopingNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.12.100.2.8 |
sheQoSPm OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.13 |
sheQoSPmCounterTableThe QoS Performance counter table. SEQUENCE OF SheQoSPmCounterEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.13.1 |
sheQoSPmCounterEntryThe table provides set of hw-packet counters for egrees direction. The given values represent the current queue fill levels. These table will be indeced by the ifIndex of the GE uplink. To get usefull results, the NE should support a reasonable priority to queue mapping. SheQoSPmCounterEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1 |
sheQoSPacketCounterQueue1Current number of packets in the Queue.ro Counter64 .1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.1 |
sheQoSPacketCounterQueue2Current number of packets in the Queue.ro Counter64 .1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.2 |
sheQoSPacketCounterQueue3Current number of packets in the Queue.ro Counter64 .1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.3 |
sheQoSPacketCounterQueue4Current number of packets in the Queue.ro Counter64 .1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.4 |
sheQoSPacketCounterQueue5Current number of packets in the Queue.ro Counter64 .1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.5 |
sheQoSPacketCounterQueue6Current number of packets in the Queue.ro Counter64 .1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.6 |
sheQoSPacketCounterQueue7Current number of packets in the Queue.ro Counter64 .1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.7 |
sheQoSPacketCounterQueue8Current number of packets in the Queue.ro Counter64 .1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.8 |
sheQoSDroppedPacketCounterDropped packets per Interface.ro Counter64 .1.3.6.1.4.1.231.7.1.2.2.1.4.13.1.1.9 |
sheQoSPmControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.13.2 |
sheQoSPmControlRequestclearQosPmCounters: sheQoSPmControlIndexrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.1 |
sheQoSPmControlIndexValue depends on the used ControlRequest.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.2 |
sheQoSPmControlStatusThe status of a user command. .ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.3 |
sheQoSPmControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.4 |
sheQoSPmControlReqResultThe result of the last user command.ro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.5 |
sheQoSPmControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.13.2.6 |
sheQoSPmNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.13.3 |
sheQoSPmCountersClearedCounters cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.13.3.1 |
sheQoSPmConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.13.100 |
sheQoSPmCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.13.100.1 |
sheQoSPmComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.13.100.1.1 |
sheQoSPmGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.13.100.2 |
sheQoSPmGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.13.100.2.1 |
sheQoSPmControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.13.100.2.2 |
sheQoSPmNotificationsGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.13.100.2.3 |
sheUmas OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.14 |
sheUmasBase OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.14.1 |
sheUmasUseDhcpNextHopUsing the nexthop address of DHCP packet as a protected MAC address.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.14.1.1 |
sheUmasBaseUsePppoeNextHopIndicates if umas keeps the uplink mac address through PADR (PPPoE Active Discovery Request).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.14.1.2 |
sheUmasBasePppoeAgingTimeIndicates time until the next-hop address of pppoe is deleted from umas table.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.14.1.3 |
sheUmasTableThe Uplink MAC antispoofing table. SEQUENCE OF SheUmasEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.14.2 |
sheUmasEntryUmas is an abbreviation for Uplink mac anti spoofing. This table contains a few entries for Uplink (Gateway, DHCP server, etc) Mac anti-spoofing function. 2 ways for that: specifying a static Mac address and automatically collecting Mac addresses to be protected. SheUmasEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1 |
sheUmasIndexThe index of Umas table.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.1 |
sheUmasAddressThe mac address which is proctected.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.2 |
sheUmasIsStaticIndicates if this entry is static or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.3 |
sheUmasIsDhcpNextHopIndicates if this address is the next hop address of DHCP packet.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.4 |
sheUmasIsPppoeNextHopIndicates if this address is the next hop address of PPPoE packet.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.14.2.1.5 |
sheUmasControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.14.3 |
sheUmasControlRequestsetUmasUseDhcpNextHop: sheUmasControlUseDhcpNextHop addUmasStaticAddr: sheUmasControlIndex sheUmasControlStaticAddr delUmasStaticAddr: sheUmasControlIndex sheUmasControlStaticAddr setUmasUsePppoeNextHop: sheUmasControlUsePppoeNextHop setUmasPppoeAgingTime: sheUmasControlPppoeAgingTimerw SheUmasControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.1 |
sheUmasControlStatusStatus of command. If requestBusy a command is still ongoing and another command will be rejected.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.2 |
sheUmasControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.3 |
sheUmasControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.4 |
sheUmasControlReqResultThe result of the last user command.ro SheUmasControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.5 |
sheUmasControlStaticAddrThe static MAC address which should be protected.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.6 |
sheUmasControlUseDhcpNextHopUsing the nexthop address of DHCP packet as a protected MAC address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.7 |
sheUmasControlIndexIndex for controlrequest to identify the table entry.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.8 |
sheUmasControlUsePppoeNextHopIndicates if umas keeps the uplink mac address through PADR (PPPoE Active Discovery Request).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.9 |
sheUmasControlPppoeAgingTimeIndicates time until the next-hop address of pppoe is deleted from umas table.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.14.3.10 |
sheUmasNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.14.4 |
sheUmasStaticAddrChangedCalled after addUmasStaticAddr(102), delUmasStaticAddr(103) is requested for notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.1 |
sheUmasUseDhcpNextHopChangedCalled after setUmasUseDhcpNextHop (101) is requested for notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.2 |
sheUmasUsePppoeNextHopChangedCalled after setUmasUsePppoeNextHop (104) is requested for notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.3 |
sheUmasPppoeAgingTimeChangedCalled after setUmasPppoeAgingTime (105) is requested for notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.4 |
sheUmasVlanEntryCreatedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.5 |
sheUmasVlanEntryDeletedConfiguration notification. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.6 |
sheUmasAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.10 |
sheUmasIUBlacklistOverflowUMAS blacklist overflow per card alarm. AlarmReportingSource -> entPhysicalIndex of card AlarmReportingSourceType -> physicalEntity New with R2.8 maintenance. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.14.4.10.1 |
sheUmasVlanTableCR#003659 - UMAS extension with R2.8 New with R2.8 maintenance. SEQUENCE OF SheUmasVlanEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.14.5 |
sheUmasVlanEntryThe table contain all VLAN's for which dynamic UMAS should be supported. SheUmasVlanEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.14.5.1 |
sheUmasVlanIdA vlanid of which dynamic UMAS should be supported.ro INTEGER .1.3.6.1.4.1.231.7.1.2.2.1.4.14.5.1.1 |
sheUmasVlanControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.14.6 |
sheUmasVlanControlRequestcreateUmasVlanEntry (110): sheUmasVlanControlVlanId deleteUmasVlanEntry (111): sheUmasVlanControlVlanIdrw SheUmasControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.14.6.1 |
sheUmasVlanControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.14.6.2 |
sheUmasVlanControlTimestampThe time stamp of the last command (end of command).ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.14.6.3 |
sheUmasVlanControlTimerMaximum command execution time (timeout) in seconds in case of a long running command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.14.6.4 |
sheUmasVlanControlReqResultThe result of the last user command.ro SheUmasControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.14.6.5 |
sheUmasVlanControlVlanIdTable index to create or delete.rw INTEGER .1.3.6.1.4.1.231.7.1.2.2.1.4.14.6.6 |
sheUmasConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.14.100 |
sheUmasCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.14.100.1 |
sheUmasComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.14.100.1.1 |
sheUmasGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.14.100.2 |
sheUmasGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.14.100.2.1 |
sheUmasControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.14.100.2.2 |
sheUmasNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.14.100.2.3 |
sheCebs OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.15 |
sheCebsPortTableThe CEBS port table SEQUENCE OF SheCebsPortEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.15.1 |
sheCebsPortEntrytable entry SheCebsPortEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.15.1.1 |
sheCebsPortBridgePortIndexIndex to the sheBridgePortTable. Points to the Bridgeport this configuration is made for. If created, the CEBS state of this Bridgeport is enabled.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.1.1.1 |
sheCebsPortControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.15.2 |
sheCebsPortControlRequest950 - createCebsPortTableEntry Parameters : sheCebsControlBridgePortIndex 951 - deleteCebsPotyTableEntry Parameters : sheCebsControlBridgePortIndexrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.1 |
sheCebsPortControlStatusconfiguration control statusro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.2 |
sheCebsPortControlTimestampTime stamp attribute set at the end of a command.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.3 |
sheCebsPortControlReqResultResult of the last commandro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.4 |
sheCebsPortControlTimerMaximum command execution time (timeout) in seconds in case of a long running commandro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.5 |
sheCebsPortControlBridgePortIndexIndex to the sheBridgePortTable. Points to the Bridgeport were this configuration is made for. If configured, the cebs state of this Bridgeport is enabled.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.2.6 |
sheCebsSubscriberTableThe CEBS subscriber table SEQUENCE OF SheCebsSubscriberEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.15.3 |
sheCebsSubscriberEntrytable entry SheCebsSubscriberEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1 |
sheCebsSubscriberIpAddressThe subscriber IP address configured by DHCP or operator.ro IpAddress .1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.1 |
sheCebsSubscriberBridePortIndexIndex to the sheBridgePortTable. Points to the Bridgeport this configuration is made for.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.2 |
sheCebsSubscriberVlanThe vlan that subscriber uses.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.3 |
sheCebsSubscriberIsStaticIndicates if this subscriber is created by operator command, sheArpFixedIpAddressControlRequest.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.4 |
sheCebsSubscriberIsDynamicIndicates if this subscriber is created by DHCP.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.5 |
sheCebsSubscriberOperStateThe operating state specifying whether the subscriber is able to get CEBS service. 1 : Down 2 : Upro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.3.1.6 |
sheCebsDhcpGatewayTableThe CEBS Dhcp gateway table. SEQUENCE OF SheCebsDhcpGatewayEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.15.4 |
sheCebsDhcpGatewayEntrytable entry SheCebsDhcpGatewayEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.15.4.1 |
sheCebsDhcpGatewayUserVlanSubscriver vlanro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.4.1.1 |
sheCebsDhcpGatewayIpAddressThe dymamic IP address that a DHCP automatically sets as a gateway.ro IpAddress .1.3.6.1.4.1.231.7.1.2.2.1.4.15.4.1.2 |
sheCebsStaticGatewayTableThe CEBS static gateway table SEQUENCE OF SheCebsStaticGatewayEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.15.5 |
sheCebsStaticGatewayEntrytable entry SheCebsStaticGatewayEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.15.5.1 |
sheCebsStaticGatewayUserVlanSubscriver vlanro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.5.1.1 |
sheCebsStaticGatewayIpAddressThe static IP address that a user vlan uses as a gateway. If this value is not configured, follow the the value that DHCP sets automatically.ro IpAddress .1.3.6.1.4.1.231.7.1.2.2.1.4.15.5.1.2 |
sheCebsStaticGatewayControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.15.6 |
sheCebsStaticGatewayControlRequest952 - createCebsStaticGatewayTableEntry Parameters : sheCebsStaticGatewayControlUserVlan sheCebsStaticGatewayControlIpAddress 953 - modifyCebsStaticGatewayTableEntry Parameters : sheCebsStaticGatewayControlUserVlan sheCebsStaticGatewayControlIpAddress 954 - deleteCebsStaticGatewayTableEntry Parameters : sheCebsStaticGatewayControlUserVlanrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.1 |
sheCebsStaticGatewayControlStatusconfiguration control statusro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.2 |
sheCebsStaticGatewayControlTimestampTime stamp attribute set at the end of a commandro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.3 |
sheCebsStaticGatewayControlReqResultResult of the last commandro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.4 |
sheCebsStaticGatewayControlTimerMaximum command execution time (timeout) in seconds in case of a long running commandro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.5 |
sheCebsStaticGatewayControlUserVlanSubscriver vlanrw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.6 |
sheCebsStaticGatewayControlIpAddressThe static IP address that a user vlan uses as a gateway. If this value is not configured, follow the the value that DHCP sets automatically.rw IpAddress .1.3.6.1.4.1.231.7.1.2.2.1.4.15.6.7 |
sheCebsVirtualMacTablecebs virtual mac table SEQUENCE OF SheCebsVirtualMacEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.15.7 |
sheCebsVirtualMacEntrytable entry SheCebsVirtualMacEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.15.7.1 |
sheCebsVirtualMacAddressMac addressro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.15.7.1.1 |
sheCebsVirtualMacTypeThe flag specifying what this mac address is used for. 1 : IP(Internet Protocol), This is a global mac address for IP. The number of mac is only one for the IP. In this case sheCebsVirtualMacEntPhysicalIndex indicates rack index. 2 : PPPoE(Point to Point Protocol over Ethernet) This mac is assigned to a slot for PPPoE. The number of mac is one per slot. In this case sheCebsVirtualMacEntPhysicalIndex indicates the index of a slot.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.7.1.2 |
sheCebsVirtualMacEntPhysicalIndexThe entPhysical index of the card/rack that this virtual mac will be used. This is table index also!!ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.15.7.1.3 |
sheCebsVirtualMacControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.15.8 |
sheCebsVirtualMacControlRequest955 - createCebsVirtualMacTableEntry Parameters : sheCebsVirtualMacControlAddress sheCebsVirtualMacControlType SheCebsVirtualMacControlEntPhysicalIndex 956 - deleteCebsVirtualMacTableEntry Parameters : sheCebsVirtualMacControlAddressrw SheBridgeControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.1 |
sheCebsVirtualMacControlStatusconfiguration control statusro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.2 |
sheCebsVirtualMacControlTimestampTime stamp attribute set at the end of a command.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.3 |
sheCebsVirtualMacControlReqResultResult of the last commandro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.4 |
sheCebsVirtualMacControlTimerMaximum command execution time (timeout) in seconds in case of a long running commandro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.5 |
sheCebsVirtualMacControlAddressVirtual mac address used during CEBS servicerw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.6 |
sheCebsVirtualMacControlTypeThe flag specifying what this mac address is used for. 1 : IP(Internet Protocol), This is global mac address for IP. The number of mac is only one for the IP. In this case sheCebsVirtualMacEntPhysicalIndex indicates rack index 2 : PPPoE(Point to Point Protocol over Ethernet) This mac is assigned to a slot for PPPoE. The number of mac is one per slot. In this case sheCebsVirtualMacEntPhysicalIndex indicates the index of a slot.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.7 |
sheCebsVirtualMacControlEntPhysicalIndexThe entPhysical index of the card/rack that this virtual mac will be used. Index of the table entry which should be modified.rw PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.15.8.8 |
sheCebsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.15.9 |
sheCebsPortTableEntryCreatedsheCebsPortTableEntry has been created. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.1 |
sheCebsPortTableEntryDeletedsheCebsPortTableEntry has been deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.2 |
sheCebsStaticGatewayTableEntryCreatedsheCebsStaticGatewayTableEntry has been created. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.3 |
sheCebsStaticGatewayTableEntryModifiedsheCebsStaticGatewayTableEntry has been modified. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.4 |
sheCebsStaticGatewayTableEntryDeletedsheCebsStaticGatewayTableEntry has been deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.5 |
sheCebsVirtualMacTableEntryCreatedsheCebsPortTableEntry has been created. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.6 |
sheCebsVirtualMacTableEntryDeletedsheCebsVirtualMacTableEntry has been deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.15.9.7 |
sheCebsConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.15.100 |
sheCebsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.15.100.1 |
sheCebsComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.15.100.1.1 |
sheCebsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.15.100.2 |
sheCebsGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.15.100.2.1 |
sheCebsControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.15.100.2.2 |
sheCebsNotificationsGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.15.100.2.3 |
sheMat OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.16 |
sheMatBase OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.16.1 |
sheMatDslamIdA DSLAM ID used for IU's MAC address translation. MAT is performed based on this DSLAM ID. The DSLAM ID should be interpreted as a hex value. Depending on the used MatTranslationMode, the following restrictions should be made: TranslationMode: world - The DSLAM ID should be a value between 0..4095 (0..FFF, 12 bits are valid)! The not needed upper bits will be ignored. ths - The DSLAM ID should be a value between 0..524287 (0..7FFFF, 19 bits are valid)! The not needed upper bits will be ignored. Default value is -1, that means a DSLAM ID is not assigned. NOTE: A modified DSLAM ID need an IU reset for activation!ro Integer32 (-1..524287) .1.3.6.1.4.1.231.7.1.2.2.1.4.16.1.1 |
sheMatTranslationModeThe attribute describes, which format for MAC address translation will be used. general structure: byte5-byte4-byte3-byte2-byte1-byte0 bit47 .........................bit0 world(1) - byte 5 - DSLAM ID (bit 47-44, 4 bit) and identifier (0110) byte 4 - DSLAM ID byte 3 - slot number byte 2 - port number byte 1 - VCC number byte 0 - MAC address index ths(2) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will use an fix offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe. thsNoIndexOffset(3) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will not use an offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe.ro SheMatTranslationModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.16.1.2 |
sheMatPortTableThe MAT port table for enable/disable this feature on bridgePort base. NOTE: This table will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!! With R2.8 the functionality is available in the NE again, but the configuration should directly be done via sheBridgePortTable.obsolete SEQUENCE OF SheMatPortEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.16.2 |
sheMatPortEntrytable entryobsolete SheMatPortEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.16.2.1 |
sheMatPortEnableEnable or disable the MAC address translation feature on bridgePort base. NOTE: This parameter will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!! With R2.8 the functionality is available in the NE again, but the configuration should directly be done via sheBridgePortTable.roobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.16.2.1.1 |
sheMatTableThe MAT table contain the translated MAT addresses and her original laerned value. New with R2.8 maintenance: This release introduces a new ControlRequest command for refresh of this table. Without calling this command, the table content will be static and not longer automatically updated. The refresh command could be used together with the BridgePortIndex, which is the first table index here. If a valid BridgePortIndex value was used, only the tableEntries with this BridgePortIndex as first key will be refreshed. If the BridgePortIndex is 0 or unknown the full table will be refreshed. SEQUENCE OF SheMatEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.16.3 |
sheMatEntrytable entry SheMatEntry .1.3.6.1.4.1.231.7.1.2.2.1.4.16.3.1 |
sheMatTranslatedMacAddressTranslated MAC addressro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.16.3.1.1 |
sheMatOriginalMacAddressOriginal MAC addressro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.4.16.3.1.2 |
sheMatIndexThis index is the new third index value for this table.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.16.3.1.3 |
sheMatControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.16.4 |
sheMatControlRequestsetDslamId(100): sheMatControlDslamId setPortEnable(101): sheMatControlBridgePortIndex sheMatControlPortEnable setMatTranslationMode(102): sheMatControlTranslationMode NOTE: SheMatPortTable will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!! Usecase setPortEnable(101) is not longer supported!! Release R2.8 will support a new port specific enable command via sheBridgePortTable! New with R2.8 maintenance: refreshMatTable (105): sheMatControlBridgePortIndexrw SheMatControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.1 |
sheMatControlStatusDescribes the status of a user command group, used for block commands while a command execution is in process. - Values : idle, busy, passed, failed - idle: default, no command in process - busy: command execution in process, attempts to start another user command on this control block are rejected - passed/failed: status at the end of a commandro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.2 |
sheMatControlTimestampTime stamp attribute set at the end of a command.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.3 |
sheMatControlReqResultResult of the last commandro SheBridgeControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.4 |
sheMatControlTimerMaximum command execution time (timeout) in seconds in case of a long running commandro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.5 |
sheMatControlDslamIdA DSLAM ID used for IU's MAC address translation. MAT is performed based on this DSLAM ID. The DSLAM ID should be interpreted as a hex value. Depending on the used MatTranslationMode, the following restrictions should be made: TranslationMode: world - The DSLAM ID should be a value between 0..4095 (0..FFF, 12 bits are valid)! The not needed upper bits will be ignored. ths - The DSLAM ID should be a value between 0..524287 (0..7FFFF, 19 bits are valid)! The not needed upper bits will be ignored. Default value is -1, that means a DSLAM ID is not assigned.rw Integer32 (-1..524287) .1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.6 |
sheMatControlBridgePortIndexA bridge port index identifierrw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.7 |
sheMatControlPortEnableSets MAC address translation enable/disable. NOTE: This value will not longer supported with SHE R2.6. The enable/disable of this feature will be done on VLAN base starting with this release. Use new parameters in sheVlanTable therefor!!rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.8 |
sheMatControlTranslationModeThe attribute descripes, which format for MAC address translation will be used. world(1) - byte 5 - DSLAM ID (bit 47-44, 4 bit) and identifier (0110) byte 4 - DSLAM ID byte 3 - slot number byte 2 - port number byte 1 - VCC number byte 0 - MAC address index ths(2) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will use an fix offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe. thsNoIndexOffset(3) - byte 5 - control (bit 47 = 0, bit 46 always 1, bit 45-40 no change) byte 4,3,2 - DSLAM ID (bit 39-21, 19 bit) byte 2,1 - slot number (bit 20-15, 6 bit) byte 1,0 - port number (bit 14-6, 9 bits) byte 0 - MAC address index (bit 5-0, 6 bits) This translation mode will not use an offset for selected MAC address indeces depending on the fact, if the orginal MAc address was learned from a tagged or an untagged userframe.rw SheMatTranslationModeType .1.3.6.1.4.1.231.7.1.2.2.1.4.16.4.9 |
sheMatNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.16.5 |
sheMatDslamIdChangedsheMatDslamId has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.16.5.1 |
sheMatPortEnableChangedsheMatPortEnable has been changed.obsolete NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.16.5.2 |
sheMatTranslationModeChangedsheMatTranslationMode has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.16.5.3 |
sheMatTableUpdatedMAT table update finished. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.4.16.5.4 |
sheMatConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.16.100 |
sheMatCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.1 |
sheMatComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.1.1 |
sheMatGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.2 |
sheMatGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.2.1 |
sheMatControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.2.2 |
sheMatNotificationsGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.2.3 |
sheMatObsoleteGroupDescription.obsolete Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.2.4 |
sheMatObsoleteNotificationGroupDescription.obsolete Unknown .1.3.6.1.4.1.231.7.1.2.2.1.4.16.100.2.5 |