WWP-LEOS-SYSTEM-CONTROL-MIB
The WWP-LEOS-SYSTEM-CONTROL-MIB provides SNMP management interfaces for the WWP LEOS switch platform to monitor and configure core system control parameters, including device status, operational state, and system-level configuration variables.
Imported Objects
Objects
14 total| Object Name |
|---|
wwpLeosSysCtrlMIBThe MIB module for the WWP SysCtrl specific information. MODULE-IDENTITY .1.3.6.1.4.1.6141.2.60.25 |
wwpLeosSysCtrlMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.25.1 |
wwpLeosSysCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.25.1.1 |
wwpLeosSysCtrlBridgeRstpEnablewhen this object is set to 'true' the rstp operation for the bridge is enabled. Setting this object to 'false' disable bridge rstp operations.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.25.1.1.1 |
wwpLeosSysCtrlLacpEnablewhen this object is set to 'true' the Lacp operation for the device is enabled. Setting this object to 'false' disable the Lacp operations.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.25.1.1.2 |
wwpLeosSysCtrlLldpStateSetting this object will enable or disable LLDP globally.rw Enumeration .1.3.6.1.4.1.6141.2.60.25.1.1.3 |
wwpLeosSysCtrlLldpExt OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.25.1.2 |
wwpLeosSysCtrlLldpDaMacSetting this object will set da mac for lldp.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.25.1.2.1 |
wwpLeosSysCtrlLldpEthTypeSetting this object will set frame type for for lldp.rw INTEGER .1.3.6.1.4.1.6141.2.60.25.1.2.2 |
wwpLeosSysCtrlMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.25.2 |
wwpLeosSysCtrlMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.25.2.0 |
wwpLeosSysCtrlMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.25.3 |
wwpLeosSysCtrlMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.25.3.1 |
wwpLeosSysCtrlMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.25.3.2 |
More MIBs from World Wide Packets
Browse all World Wide PacketsMIBs →SNMP MIB module
The WWP-LEOS-CFM-MIB enables configuration and monitoring of IEEE 802.1ag Connectivity Fault Management (CFM) entities, including Maintenance Domains, Maintenance Associations, and Maintenance End Points, on WWP-LEOS network devices. It facilitates the retrieval of critical fault detection metrics such as Continuity Check (CC) state, Last Link Status, and Maintenance Level (ML) to verify Layer 2 connectivity integrity.
SNMP MIB module
SNMP MIB module
The WWP-LEOS-PORT-STATS-MIB module monitors Layer 2 Ethernet port statistics on WWP (Wireless WAN Platform) devices running LEOS firmware, specifically tracking interface counters such as octets, packets, errors, and discards for operational visibility and fault detection.
The WWP-LEOS-CHASSIS-MIB facilitates the retrieval of the specific system part number and serial number for WWP LEOS chassis hardware via SNMP. These object identifiers enable precise asset inventory tracking and device identification within network management systems.