WWP-LEOS-PORT-MIB
This MIB defines the managed objects for Ethernet ports.
Main OID:
wwpLeosPortMIB.1.3.6.1.4.1.6141.2.60.2
101
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
101 total| Object Name |
|---|
wwpLeosPortMIBThis MIB defines the managed objects for Ethernet ports. MODULE-IDENTITY .1.3.6.1.4.1.6141.2.60.2 |
wwpLeosPortMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.2.1 |
wwpLeosEtherPort OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.2.1.1 |
wwpLeosEtherPortTableTable of Ethernet Ports. SEQUENCE OF WwpLeosEtherPortEntry .1.3.6.1.4.1.6141.2.60.2.1.1.1 |
wwpLeosEtherPortEntryPort Entry in the Ethernet Port Table. WwpLeosEtherPortEntry .1.3.6.1.4.1.6141.2.60.2.1.1.1.1 |
wwpLeosEtherPortIdPort ID for the instance. Port ID's start at 1,
and may not be consecutive for each additional port.
This port Id should refer to the dot1dBasePort in the
Dot1dBasePortEntry.ro INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.1 |
wwpLeosEtherPortNameA textual string containing information about the
port. This string should indicate about the physical
location of the port as well.ro DisplayString .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.2 |
wwpLeosEtherPortDescA textual string containing port description.rw DisplayString .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.3 |
wwpLeosEtherPortTypeThe port type for the port.ro Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.4 |
wwpLeosEtherPortPhysAddrThe ethernet MAC address for the port. This information can also
be achieved via dot1dTpFdbTablero MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.5 |
wwpLeosEtherPortAutoNegThe object sets the port to AUTO NEG MOde and vice versa.
Specific platforms may have requirements of configuring
speed before moving the port to out of AUTO-NEG mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.6 |
wwpLeosEtherPortAdminStatusThe desired state of the port.rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.7 |
wwpLeosEtherPortOperStatusThe current operational state of Port.ro Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.8 |
wwpLeosEtherPortAdminSpeedDesired speed of the port.
Set the port speed to be either 10MB, 100MB, or gig. Set the
port speed to auto to enable automatic port speed detection.
The default value for this object depends upon the platform.rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.9 |
wwpLeosEtherPortOperSpeedThe current operational speed of the port.rodeprecated Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.10 |
wwpLeosEtherPortAdminDuplexThe desired mode for the port. It can be set to either half or
full duplex operation. The default value for this object
depends upon the platform.rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.11 |
wwpLeosEtherPortOperDuplexThe current duplex mode of the port.ro Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.12 |
wwpLeosEtherPortAdminFlowCtrlConfigures the ports flow control operation.rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.13 |
wwpLeosEtherPortOperFlowCtrlShows ports flow control configuration.ro Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.14 |
wwpLeosEtherIngressPvidThe Ingress PVID, the VLAN ID associated with untagged frames ingressing
the port or if tunnel is enabled on this port. The max value for this
object is platform dependent. Refer to architecture document for details
of platform dependency.rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.15 |
wwpLeosEtherUntagEgressVlanIdAll the egress frames whose VLAN id matches the wwpLeosEtherUntagEgressVlanId, will
egress the port as untagged. To egress the frames tagged set
wwpLeosEtherUntagEgressVlanId to 0. The max value for this object is
platform dependent. Refer to architecture document for
details of platform dependency.rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.16 |
wwpLeosEtherPortAcceptableFrameTypesWhen this is admitOnlyVlanTagged(2) the device will
discard untagged frames or Priority-Tagged frames
received on this port. When admitOnlyUntagged(3) is set,
the device will discard VLAN tagged frames received on
this port. With admitOnlyUntagged(3) and admitAll(1),
untagged frames or Priority-Tagged frames received on this
port will be accepted and assigned to the PVID for this port.
This control does not affect VLAN independent BPDU
frames, such as GVRP and STP. It does affect VLAN
dependent BPDU frames, such as GMRP.rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.17 |
wwpLeosEtherPortUntaggedPriorityThe 802.1p packet priority to be assigned to packets ingressing
this port that do not have an 802.1Q VLAN header. This priority
is also assigned to ingress frame if tunnel is enabled on this port.rwdeprecated Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.18 |
wwpLeosEtherPortMaxFrameSizeSetting this object will set the max frame size allowed on a
port. The max frame size can vary from 1522 bytes to 9216 bytes.
Default value is 1526 bytes.rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.19 |
wwpLeosEtherPortVlanIngressFilteringWhen this is true(1) the device will discard incoming
frames for VLANs which do not include this Port in its
Member set. When false(2), the port will accept all
incoming frames.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.20 |
wwpLeosEtherPortAdminAdvertisedFlowCtrlThis object specifies the advertised flow control
for given port.rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.21 |
wwpLeosEtherPortVplsPortTypeThis object specifies whether port is in subscriber type,
network facing side or both.ro Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.22 |
wwpLeosEtherPortIngressCosPolicyThis object specifies the ingress cos policy to be applied to all
frames coming in on the given port.rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.23 |
wwpLeosEtherPortIngressFixedDot1dPriThe 802.1p packet priority to be assigned to packets ingressing
this port that do not have an 802.1Q VLAN header. This priority
is also assigned to ingress untagged frame if the virtual switch
cos policy is set to 'fix' for a given port.rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.24 |
wwpLeosEtherPortUntagDataVsiThis object specifies the virtual switch to be used for this
port if data frame is untagged. If this object is set to 0 then
device will unset this object.
When setting this object to Mpls Vsi Index then wwpLeosEtherPortUntagDataVsiType must also
be set to mpls (Use multiple set operation)rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.25 |
wwpLeosEtherPortOperationalSpeedAn estimate of the port's current bandwidth in k-bits per second
for given port.ro Gauge32 UNITS "kbps" .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.26 |
wwpLeosEtherPortUntagCtrlVsiThis object specifies the virtual switch to be used for this
port if control frame is untagged. If this object is set to 0 then
device will unset this object.
When setting this object to Mpls Vsi Index then wwpLeosEtherPortUntagCtrlVsiType must also
be set to mpls (Use multiple set operation)rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.27 |
wwpLeosEtherPortMirrorPortThis object defines whether the port will allow traffic from other ports to
be mirrored to this port.
To allow traffic from other ports to be sent to this port, set this object to
True(1). This port is known as a mirror port.
If set to true, then other ports may set the values of their
wwpLeosEtherPortMirrorIngress or wwpLeosEtherPortMirrorEgress
objects to the port index of this port.
Setting this object to false(2) disables this port as a mirror port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.28 |
wwpLeosEtherPortMirrorIngressThe value of this object is the port index of a mirror port. The ingress traffic
of this port can be mirrored by setting the destination port's wwpLeosEtherPortMirrorPort
object to true.
If the value of this object is set to zero this port's ingress traffic will not be mirrored.rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.29 |
wwpLeosEtherPortMirrorEgressThe value of this object is the port index of a mirror port. The egress traffic
of this port can be mirrored by setting the destination port's wwpLeosEtherPortMirrorPort
object to true.
If the value of this object is set to zero this port's egress traffic will not be mirrored.rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.30 |
wwpLeosEtherPortUntagDataVsiTypeThis object specifies the virtual switch instance type associated with this
port. This object defaults to ethernet and specifies if
wwpLeosEtherPortUntagDataVsi belongs to ethernet virtual switch table
(wwpLeosVplsVirtualSwitchEthTable in WWP-LEOS-VPLS-MIB)
or mpls virtual switch table (wwpLeosVplsVirtualSwitchMplsTable in
WWP-LEOS-VPLS-MIB).
When setting wwpLeosEtherPortUntagDataVsi to MPLS Vsi Index then this object must also be set to
mpls (Use mutliple set operation).rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.31 |
wwpLeosEtherPortUntagCtrlVsiTypeThis object specifies the virtual switch instance type associated with this
port. This object defaults to ethernet and specifies if
wwpLeosEtherPortUntagCtrlVsi belongs to ethernet virtual switch table
(wwpLeosVplsVirtualSwitchEthTable) or mpls virtual switch table
(wwpLeosVplsVirtualSwitchMplsTable).
When setting wwpLeosEtherPortUntagCtrlVsi to MPLS Vsi Index then this object must also be set to
mpls (Use mutliple set operation)rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.32 |
wwpLeosEtherPortVsIngressFilteringThis item is applicable to this port when the port is
added as a per-port member to a virtual switch. If true(1) the device
will discard incoming tagged frames. If false(2) the device will
forwared incoming tagged frames so long as those customer tagged
frames do not match another virtual switch with this port included as
a per-port-per-vlan member.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.33 |
wwpLeosEtherPortOperAutoNegThe object specifies the operational auto neg state.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.34 |
wwpLeosEtherPortUpTimeThe object specifies the port up time in hundredths of a second.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.35 |
wwpLeosEtherPortUntagDataVidThe Ingress Untagged Data Vid, the VLAN ID stamped on untagged frames
ingressing the port or if tunnel is enabled on this port. To disable
tagging of untagged data on ingress write a value of 0. The max value
for this object is platform dependent. Refer to architecture document
for details of platform dependency.rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.36 |
wwpLeosEtherPortPhyLoopbackThis object defines whether the phy has been placed in loopback mode,
which causes frames egressing the port to be looped back to the port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.37 |
wwpLeosEtherPortVlanIngressFilterStrictThis item is applicable to this port when the port is
added as a to a virtual switch. If true(1) the legacy ingress filter behavior
will be enforced at member addition (drop bit will be set to drop untagged
traffic). If false, the splat bit will not be changed. Note that external
VLAN associations are also maintained when strict is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.38 |
wwpLeosEtherPortMacSaDaSwapThis object defines whether the MAC SA and DA will be swapped on
frames egressing the port. This only works on a 311V.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.39 |
wwpLeosEtherPortMacSaDaSwapVlanThis object defines whether the MAC SA and DA will be swapped on
specific VLAN frames egressing the port. This only works on a 311V.rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.40 |
wwpLeosEtherPortResolvedCosPolicyThe Resolved Cost Policy.
Setting this attribute is not supported in leos version 4rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.41 |
wwpLeosEtherPortModeThe mode of the port
Setting this attribute is not supported in leos version 4rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.42 |
wwpLeosEtherFixedRcosThe fixed Resolve Cost value.
Setting this attribute is not supported in leos version 4rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.43 |
wwpLeosEtherPortEgressPortQueueMapIdThe Egress-port-Queue associated with this port.
Setting this attribute is not supported in leos version 4rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.44 |
wwpLeosEtherPortResolvedCosMapIdRCOS map id for the port.
Setting this attribute is not supported in leos version 4rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.45 |
wwpLeosEtherPortResolvedCosRemarkL2The object specifies whether to remark L2 based on L3. This applies when the
resolved cos policy is either l3-dscp-cos or dot1d-tag1-cos but not when it is
fixed-cos policy. Setting this attribute is not supported in leos version 4rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.46 |
wwpLeosEtherPortL2TransformModeL2 transform action for port.
Setting this attribute is not supported in leos version 4rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.47 |
wwpLeosEtherPortLinkFlapDetectionThis object defines whether link flap detection will be
enabled on the port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.48 |
wwpLeosEtherPortLinkFlapCountThis object defines how many link down events are required
to trigger a link flap event.rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.49 |
wwpLeosEtherPortLinkFlapDetectTimeThis object defines the time in seconds during which link
down events are accumlated to trigger a link flap event.rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.50 |
wwpLeosEtherPortLinkFlapHoldTimeThis object defines the time in seconds that a port will
be operationally disabled after a link flap event, before
it is re-enabled. A value of zero causes the port to
remain disabled until manually enabled.rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.51 |
wwpLeosEtherFixedRColorThis sets the fixed color to green (default) or yellow.
Setting this attribute is not supported in saos version 4rw PortIngressFixedColor .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.52 |
wwpLeosEtherPortFrameCosMapIdFrame COS map id for the port.
Setting this attribute is not supported in leos version 4rw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.53 |
wwpLeosEtherPortEgressCosPolicySets the egress frame cos policy
Setting this attribute is not supported in leos version 4rw PortEgressFrameCosPolicy .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.54 |
wwpLeosEtherPortEgressSpeedAn estimate of the port's current egress bandwidth restriction
in k-bits per second for given port. A value of 0 means there
is no active restriction. This attribute not supported in leos
version 6ro Gauge32 UNITS "kbps" .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.55 |
wwpLeosEtherPortAdaptiveRateSpeedAn estimate of the port's current adaptive-rate bandwidth restriction
in k-bits per second for given port. A value of 0 means there is no
active restriction. This attribute not supported in leos version 6ro Gauge32 UNITS "kbps" .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.56 |
wwpLeosEtherPortMirrorEncapThis object defines whether the port will encapsulate mirrored
frames by adding a vlan-tag. (Or, in the case where a mirrored
frame is already tagged, by adding a further vlan-tag to the frame)
To allow mirrored traffic to be encapsulated, set this object to
vlan-tag(1).
If set to vlan-tag, then the values of
wwpLeosEtherPortMirrorEncapVid and wwpLeosEtherPortMirrorEncapTpid
will be used to populate tag added to each mirrored frame.
Setting this object to none(0) indicates no tag is to be added
to the mirrored frames.rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.57 |
wwpLeosEtherPortMirrorEncapVidThis object defines the VID that will be added to mirrored frames
when the mirroring encapsulation mode is vlan-tagrw INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.58 |
wwpLeosEtherPortMirrorEncapTpidThis object defines the tpid used in the tag that is added to
mirrored frames, when the mirroring encapsulation mode is vlan-tagrw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.59 |
wwpLeosEtherPortIfgDecreaseThis object defines the number of bytes that will be subtracted
from the minimum standard IFG of 12 bytes as defined in IEEE 802.3.
SAOS 6.x only supports a value of 0 or 4.rw Integer32 .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.60 |
wwpLeosEtherPortAdvertSpeedThis object defines the speed capabilities that will be advertised during the auto-negotiation process.rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.61 |
wwpLeosEtherPortAdvertDuplexThis object defines the duplex capabilities that will be advertised during the auto-negotiation process.rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.1.1.62 |
wwpLeosEtherPortFlushTableTable of port flush entries. SEQUENCE OF WwpLeosEtherPortFlushEntry .1.3.6.1.4.1.6141.2.60.2.1.1.2 |
wwpLeosEtherPortFlushEntryBroadcast containment port entry in the Ethernet Port Table. WwpLeosEtherPortFlushEntry .1.3.6.1.4.1.6141.2.60.2.1.1.2.1 |
wwpLeosEtherPortFlushActivateSetting this object to 'true' will cause
the Macs to be flushed for the port
specified by wwpLeosEtherPortId.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.1.2.1.1 |
wwpLeosEtherPortTrapsTableTable of Ethernet Ports Traps. SEQUENCE OF WwpLeosEtherPortTrapsEntry .1.3.6.1.4.1.6141.2.60.2.1.1.3 |
wwpLeosEtherPortTrapsEntryPort Traps Entry in the Ethernet Port Trap Table. WwpLeosEtherPortTrapsEntry .1.3.6.1.4.1.6141.2.60.2.1.1.3.1 |
wwpLeosEtherPortTrapsStateSetting this object will enable or disable all traps on given port.rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.3.1.1 |
wwpLeosEtherPortStateMirrorGroupTableThis table can be used to keep track of all the port state mirror
groups.
To create entry in this table along with indexes following mib
objects must be set using multiple set operation
wwpLeosEtherPortStateMirrorGroupName must be valid string.
wwpLeosEtherPortStateMirrorGroupStatus must be set. SEQUENCE OF WwpLeosEtherPortStateMirrorGroupEntry .1.3.6.1.4.1.6141.2.60.2.1.1.4 |
wwpLeosEtherPortStateMirrorGroupEntryEach entry in this table will define the port state mirror group. WwpLeosEtherPortStateMirrorGroupEntry .1.3.6.1.4.1.6141.2.60.2.1.1.4.1 |
wwpLeosEtherPortStateMirrorGroupIdThis mib object is used as index in the table and is used
to identify the unique group id.ro INTEGER .1.3.6.1.4.1.6141.2.60.2.1.1.4.1.1 |
wwpLeosEtherPortStateMirrorGroupNameThis mib object is used to specify the name of the group.rw DisplayString .1.3.6.1.4.1.6141.2.60.2.1.1.4.1.2 |
wwpLeosEtherPortStateMirrorGroupOperStatusThis mib object is used to specify the operational status of the group.ro Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.4.1.3 |
wwpLeosEtherPortStateMirrorGroupNumSrcPortsThis mib object is used to specify the total number of source ports
that exists in the group.ro Counter32 .1.3.6.1.4.1.6141.2.60.2.1.1.4.1.4 |
wwpLeosEtherPortStateMirrorGroupNumDstPortsThis mib object is used to specify the total number of destination ports
that exists in the group.ro Counter32 .1.3.6.1.4.1.6141.2.60.2.1.1.4.1.5 |
wwpLeosEtherPortStateMirrorGroupStatusUsed to manage the creation and deletion of the
conceptual rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.1.4.1.6 |
wwpLeosEtherPortStateMirrorGroupTypeThis mib object is used to specify the directional mode type for the
port state mirror group. A uni-directional(1) mirror group type will only
mirror the port state of the source port(s) to the destination port(s).
The bi-directional(2) mirror group type will mirror state of either the
source port(s) to the destination port(s) or the state of the destination
port(s) will be mirrored to the source port(s). Where there are more than
one source or destination ports the combined state of the source or destination
group will be the combined 'OR'ed status of all the ports in either the source
or destination groups. In other words, if one or more source ports is 'UP'
then the source group is 'UP' and the mirrored destination state may be 'UP'.
The default for this object type is uni-directional.rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.4.1.7 |
wwpLeosEtherPortStateMirrorGroupMemTableThis table is used to keep track of port group membership. SEQUENCE OF WwpLeosEtherPortStateMirrorGroupMemEntry .1.3.6.1.4.1.6141.2.60.2.1.1.5 |
wwpLeosEtherPortStateMirrorGroupMemEntryEach entry in this table is used to represent the membership of port
to a given group and group type. WwpLeosEtherPortStateMirrorGroupMemEntry .1.3.6.1.4.1.6141.2.60.2.1.1.5.1 |
wwpLeosEtherPortStateMirrorGroupMemTypeSetting this object will specify the type of group this port is member of for a given port state mirror
group. This object can only be set while creating the entry. This object cannot be modified once entry
is created.rw Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.5.1.1 |
wwpLeosEtherPortStateMirrorGroupMemOperStateThis mib object is used to specify the operational status of the port.ro Enumeration .1.3.6.1.4.1.6141.2.60.2.1.1.5.1.2 |
wwpLeosEtherPortStateMirrorGroupMemStatusUsed to manage the creation and deletion of the
conceptual rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.1.5.1.3 |
wwpLeosEtherPortNotif OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.2.1.2 |
wwpLeosEtherStndLinkUpDownTrapsEnableSetting this object to 'false(2)' will cause
standard Link Up Down Traps to be suppressed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.2.1 |
wwpLeosEtherPortLinkUpDownTrapsEnableSetting this object to 'true(1)' will cause
wwp specific port up down trap to be generated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.2.2 |
wwpLeosEtherAggPortLinkUpDownTrapsEnableSetting this object to 'true(1)' will cause wwp
specific agg port up down trap to be generated
for a link state change on a physical port that
is a member of a agg.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6141.2.60.2.1.2.3 |
wwpLeosPortMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.2.2 |
wwpLeosPortMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.2.2.0 |
wwpLeosEthLinkUpA wwpLeosEthLinkUp trap signifies that the SNMP entity, acting in
an agent role, has detected that the ifOperStatus object for
one of its communication links has entered the up state. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.2.2.0.3 |
wwpLeosEthLinkDownA wwpLeosEthLinkDown trap signifies that the SNMP entity, acting in
an agent role, has detected that the ifOperStatus object for
one of its communication links has entered the down state. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.2.2.0.4 |
wwpLeosEthAdminSpeedIncompatibleA wwpLeosEthAdminSpeedIncompatible trap is generated when the port
administrative speed doesn't match the speed of the SFP transceiver
installed. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.2.2.0.5 |
wwpLeosEthLinkFlapA wwpLeosEthLinkFlap trap signifies that the SNMP entity,
acting in an agent role, has detected that the ifOperStatus
object for one of its communication links has been changed
due to link flap detection. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.2.2.0.6 |
wwpLeosAggLinkUpDownA wwpLeosAggLinkUpDown trap signifies that the SNMP entity,
acting in an agent role, has detected that the ifOperStatus
object for one of its communication links has changed state. NOTIFICATION-TYPE .1.3.6.1.4.1.6141.2.60.2.2.0.7 |
wwpLeosPortMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.2.3 |
wwpLeosPortMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.2.3.1 |
wwpLeosPortMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6141.2.60.2.3.2 |