WSA-TRAP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for WSA-TRAP-MIB.
104
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
104 total| Object Name |
|---|
sni OBJECT IDENTIFIER .1.3.6.1.4.1.231 |
IMPORTS Unknown .1.3.6.1.4.1.231 |
sniProductMibs OBJECT IDENTIFIER .1.3.6.1.4.1.231.2 |
sniExtensions OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10 |
sniServerMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2 |
testTrapTest trap to verify trap connection. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.600 |
sniCommon OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2 |
sniServerControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2.5 |
diagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2.5.13 |
sendTestTrapSend a trap to the manager application(s) to test connection and
trap configuration; trap cannot be disabled. Reading this object
just returns the value 0.rw Enumeration .1.3.6.1.4.1.231.2.10.2.2.5.13.1 |
trapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2.5.20 |
trapServerNameName of server the trap occurred DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.2.5.20.1 |
trapTimeTime the trap occurred (in seconds since 01/01/1970 00:00h) INTEGER .1.3.6.1.4.1.231.2.10.2.2.5.20.2 |
wsaObjects OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.41 |
wsaLarHardwareDefectSetIs sent if Hardware Defect Flag is set TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.1 |
wsaLarHardwareDefectUnsetIs sent if Hardware Defect Flag is deleted TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.2 |
wsaLarHardwareErrorSetIs sent if Hardware Error Flag is set TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.3 |
wsaLarHardwareErrorUnsetIs sent if Hardware Error Flag is deleted TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.4 |
wsaAgentStartIs sent when PRIMEPOWER ServerView suite agent starts TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.5 |
wsaErrorRepairIs sent when some error condition is repaired TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.6 |
wsaDefectRepairIs sent when some defect condition is repaired TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.7 |
wsaNodeStatusIntegratedNode is present or not TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.24 |
wsaNodeStatusNotavailNode is not available TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.25 |
wsaNodeStatusNotrunningNode is not running TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.26 |
wsaLUNStateChangedIs sent if state of a LUN changed TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.101 |
wsaRAIDControllerDefectIs sent if RAID controller defect TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.102 |
wsaRAIDDiskDefectIs sent if RAID disk defect TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.103 |
wsaEnvironmentHardwareDefectSetIs sent if Hardware Defect Flag is set for FANs or power supplies TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.301 |
wsaEnvironmentHardwareErrorSetIs sent if Hardware Error Flag is set for FANs or power supplies TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.302 |
wsaEnvironmentRepairIs sent when some environment defect / error condition is repaired TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.303 |
wsaStorageHardwareDefectSetIs sent if Hardware Defect Flag is set for Storage Devices TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.304 |
wsaStorageHardwareErrorSetIs sent if Hardware Error Flag is set for Storage Devices TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.305 |
wsaStorageRepairIs sent when some storage defect / error condition is repaired TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.306 |
wsaControllerHardwareDefectSetIs sent if Hardware Defect Flag is set for boards, controllers, cpu or memory components TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.307 |
wsaControllerHardwareErrorSetIs sent if Hardware Error Flag is set for boards, controllers, cpu or memory components TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.308 |
wsaControllerRepairIs sent when some defect / error condition is repaired boards, controllers, cpu or memory components TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.309 |
wsaMonitoringRuleMatchedIs sent when a performance rule of EventAdmin matches the first time for a special resource TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.310 |
wsaMonitoringRuleInitializedIs sent when performance monitoring indication is reset by the operator TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.311 |
wsaDROperationStartedIs sent when a DR operation is started on a partition TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.312 |
wsaDROperationFinishedIs sent when a DR operation has finished on a partition TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.313 |
wsaHardwareDeactiveSetIs sent if Hardware Deactive Flag is set for FANs or Powersupplies TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.314 |
wsaHardwareActiveSetIs sent if Hardware Deactive Flag is reset for FANs or Powersupplies TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.315 |
wsaHWComponentAttachedIs sent when a hardware component is attached TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.316 |
wsaHWComponentDetachedIs sent when a hardware component has been detached TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.317 |
wsaSMCDeactivatedIs sent when the SMC function of a console has been deactivated TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.318 |
wsaSMCActivatedIs sent when the SMC function of a console has been activated TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.319 |
wsaSystemRestartAfterPanicIs sent when a system restarts after it has been stopped by a PANIC TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.320 |
wsaPerformanceMonitoringInfoIs sent when a performance monitoring rule matches TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.321 |
wsaPerformanceMonitoringMinorIs sent when a performance monitoring rule matches TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.322 |
wsaPerformanceMonitoringMajorIs sent when a performance monitoring rule matches TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.323 |
wsaPerformanceMonitoringCriticalIs sent when a performance monitoring rule matches TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.324 |
wsaFileMonitoringInfoIs sent when a file monitoring rule pattern matched to a new text in an observed file TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.325 |
wsaFileMonitoringMinorIs sent when a file monitoring rule pattern matched to a new text in an observed file TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.326 |
wsaFileMonitoringMajorIIs sent when a file monitoring rule pattern matched to a new text in an observed file TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.327 |
wsaFileMonitoringCriticalIs sent when a file monitoring rule pattern matched to a new text in an observed file TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.328 |
wsaPartitionPanicSent if a partition panics TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.329 |
wsaGenLogMessageIs sent to display a log message TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.900 |
wsaGenLogMessageInfoIs sent to display an informational log message TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.910 |
wsaGenLogMessageMinorIs sent to display a log message with severity NOTICE TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.911 |
wsaGenLogMessageMajorIs sent to display a log message with severity WARNING or ERR TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.912 |
wsaGenLogMessageCriticalIs sent to display a log message with severity CRITICAL, ALERT or EMERG TRAP-TYPE .1.3.6.1.4.1.231.2.41.0.913 |
wsaInfo OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.41.1 |
wsaMachineTypeModel Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.1.1 |
wsaNumberOfCpuNumber of CPUsro INTEGER .1.3.6.1.4.1.231.2.41.1.2 |
wsaMemorySize of Memory in Megabytero INTEGER .1.3.6.1.4.1.231.2.41.1.3 |
wsaCpuTypeArchitecture of CPUro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.1.4 |
wsaCpuFrequencyFrequency of CPUro INTEGER .1.3.6.1.4.1.231.2.41.1.5 |
wsaServerUptimeUptime of Server Systemro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.1.6 |
wsaServerTypeReturns Type of Server: Console, partition, standalonero ServerType .1.3.6.1.4.1.231.2.41.1.7 |
wsaSMCNameIf this node is a Partition, then SMC name, empty String elsero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.1.8 |
wsaMachineNameIf this node is a Partition, then Machine name, empty String elsero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.1.9 |
wsaIsManagementServerIf this node is used by WSA as a Management Server: true, else falsero Boolean .1.3.6.1.4.1.231.2.41.1.10 |
wsaAgentVersionVersion string of the wsaagt: n.nAnn nnro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.1.11 |
wsaAgentModeMode of Agent: 1: oldmode, 2: newmodero ModeType .1.3.6.1.4.1.231.2.41.1.12 |
wsaHostIdHostid of nodero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.1.13 |
wsaProductNameProduct name of this node (e.g. PRIMEPOWER PW450)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.1.14 |
wsaOSDetailsDetails about the operating systemro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.1.15 |
wsaManagementServerContains the name of the management server for this nodero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.1.16 |
wsaState OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.41.2 |
wsaLarStatusStatus of LAR events:
NoFlagSet : all components working properly, no failure
ErrorSet : at least one component has a problem, but it can still work
DefectSet : at least one component is defect - it can't work any morero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.2.1 |
wsaNodeStatusNode is in the cluster or notro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.2.2 |
wsaRunningWSA is running/not runningro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.2.3 |
wsaHwStateEnvironmentIndicates if Defect, Error or OK for power supplies and FANsro StateType .1.3.6.1.4.1.231.2.41.2.4 |
wsaHwStateControllerIndicates if Defect, Error or OK for controllers, cpu and memory dimmsro StateType .1.3.6.1.4.1.231.2.41.2.5 |
wsaHwStateStorageIndicates if a disk or tape device is defectro StateType .1.3.6.1.4.1.231.2.41.2.6 |
wsaHwStateGlobalIndicates if a hardware component is defectro StateType .1.3.6.1.4.1.231.2.41.2.7 |
wsaTrapParams OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.41.3 |
wsaServerNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.1 |
wsaTrapTimero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.2 |
wsaLarCommentComment item provided by internal HW monitoring (LAR)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.3 |
wsaHWConfAddrInternal unique HW address of the componentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.4 |
wsaModule DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.5 |
wsaSeverityContains the severity of the related log messages (INFO, NOTICE, ...) DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.6 |
wsaHwMessageContains the driver message for HW events DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.7 |
wsaEventType DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.8 |
wsaHw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.9 |
wsaHwState DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.10 |
wsaRaidDriver DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.11 |
wsaFileMonComment DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.12 |
wsaFileMonValue DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.13 |
wsaRuleName DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.14 |
wsaResourceName DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.15 |
wsaPerfValue DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.16 |
wsaRuleSetName DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.41.3.17 |
More MIBs from Sni
Browse all SniMIBs →SHE-BRIDGE-MIB
SNMP MIB module
1862 objects→
FSC-RAID-MIB
Standard SNMP MIB module defining data structures for FSC-RAID-MIB.
1229 objects→
XLDV20-MIB
SNMP MIB module
894 objects→
SHE-ADSL-MIB
The SHE-ADSL-MIB extends the standard ADSL-LINE-MIB to monitor proprietary ADSL line, physical layer, and channel performance metrics, including signal attenuation, noise margins, error counts, and configuration profiles for ATUC and ATUR interfaces. It facilitates granular management of ADSL line configurations, alarm thresholds, and traffic profiles via specific tables for physical parameters, performance data intervals, and virtual circuit types.
870 objects→
SHE-XDSL-MIB
SNMP MIB module
841 objects→
FSC-HPI-MIB
Standard SNMP MIB module defining data structures for FSC-HPI-MIB.
606 objects→