WLSX-POE-MIB
This MIB module defines MIB objects which provide information about the Power Sourcing Equipment(PSE) and Powered Device(PD). The following abbreviations are defined in [IEEE-802.3af] and will be used with the same significance in this document: PSE - Power Sourcing Equipment; PD - Powered Device;
Main OID:
wlsxPoEMIB.1.3.6.1.4.1.14823.2.2.1.18
34
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
34 total| Object Name |
|---|
wlsxPoEMIBThis MIB module defines MIB objects which provide information about the Power Sourcing Equipment(PSE) and Powered Device(PD). The following abbreviations are defined in [IEEE-802.3af] and will be used with the same significance in this document: PSE - Power Sourcing Equipment; PD - Powered Device; MODULE-IDENTITY .1.3.6.1.4.1.14823.2.2.1.18 |
wlsxPoEMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.18.0 |
wlsxTrapInterfacePoEStateWhen there is a PoE state transition i.e on or off then this trap is sent to the management entity NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.18.0.1 |
wlsxPoEMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.18.1 |
wlsxPsePortTableA table of objects that display the parameters configured for a power ethernet port. SEQUENCE OF WlsxPsePortEntry .1.3.6.1.4.1.14823.2.2.1.18.1.1 |
wlsxPsePortEntryA set of objects that display the configuration of a power ethernet port. WlsxPsePortEntry .1.3.6.1.4.1.14823.2.2.1.18.1.1.1 |
wlsxPsePortIndexThis variable uniquely identifies the power ethernet port for which this entry is populated. Integer32 .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.1 |
wlsxPsePortAdminStatusAdmin status of a power ethernet port. A value of enable(1) means that the port has PSE functions enabled on it. A value of disable(2) means that the port does not support or has disabled PSE functions.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.2 |
wlsxPsePortStateThis object indicates the status of the port. The reason for these states is indicated by wlsxPsePortStatus. on(1) - indicates that PSE is sourcing power. off(2) - indicates that PSE is not sourcing power.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.3 |
wlsxPsePortStatusThis object indicates the status of the port. unknown(1) - indicates either a state of off with the reason being not known or the state is on. offAdmin(2) - indicates the port is administratively disabled. offPowerManagement(3) - indicates the port is off due to power management. offIllegalClass(4) - indicates the port is off because the PD is of illegal class. offDetectionProgress(5)- indicates the port is off because the PD detection is in progress. offHardwareError(6) - indicates the port is off because of hardware error. offNonStandardPd(7) - indicates the port is off because the PD is a non standard one.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.4 |
wlsxPsePortDiscoveryModeThis object indicates the method of discovery used by the system for the detection of the Powered Device(PD). A value of unknown(0) means that the discovery method is unknown on this port. A value of off(1) means that the discovery method is turned off on this port. A value of ieee(2) indicates that the discovery method is IEEE based on this port. A value of cisco(3) indicates that the discovery method is Cisco based on this port.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.5 |
wlsxPsePortIsPdDetectedThis object indicates if a Powered Device(PD) is detected on this port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.6 |
wlsxPsePortIsIeeePdThis object indicates the IEEE compliance of a Powered Device(PD). A value of true(1) means the Powered Device(PD) is IEEE compliant. A value of false(2) means the Powered Device is not IEEE compliant.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.7 |
wlsxPsePortPdClassThis object indicates the Power classification of the Powered Device(PD) connected on the port. A value of 'class0(1)' indicates that the power classification of the powered device falls into class 0 in IEEE specifications. A value of 'class1(2)' indicates that the power classification of the powered devices falls into class 1 in IEEE specifications. A value of 'class2(3)' indicates that the power classification of the powered devices falls into class 2 in IEEE specifications. A value of 'class3(4)' indicates that the power classification of the powered devices falls into class 3 in IEEE specifications. A value of 'class4(5)' indicates that the power classification of the powered devices falls into class 4 in IEEE specifications.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.8 |
wlsxPsePortPriorityThis object indicates the configured priority for this port. low(1) - indicates the priority of the port is low. high(2) - indicates the priority of the port is high. critical(3) - indicates the priority of the port is critical.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.9 |
wlsxPsePortDefaultPowerMaxThis object indicates the default maximum power available on this port.ro Integer32 UNITS "milliwatts" .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.10 |
wlsxPsePortPowerAllocatedThis object indicates the configured power allocation on this port.ro Integer32 UNITS "milliwatts" .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.11 |
wlsxPsePortPowerConsumedThis object gives the power consumption by the PD on this port.ro Integer32 UNITS "milliwatts" .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.12 |
wlsxPsePortVoltageThis object indicates the voltage on this port.ro Integer32 UNITS "milliVolts" .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.13 |
wlsxPsePortCurrentThis object indicates the current on this port.ro Integer32 UNITS "milliAmps" .1.3.6.1.4.1.14823.2.2.1.18.1.1.1.14 |
wlsxPseSlotTableA table of objects that display all the details about the Power Sourcing Equipment(PSE). SEQUENCE OF WlsxPseSlotEntry .1.3.6.1.4.1.14823.2.2.1.18.1.2 |
wlsxPseSlotEntryA set of objects that displays all the information about the PSE on this device on a per slot basis. WlsxPseSlotEntry .1.3.6.1.4.1.14823.2.2.1.18.1.2.1 |
wlsxPseSlotIndexThis object uniquely identifies a PSE entry. Integer32 .1.3.6.1.4.1.14823.2.2.1.18.1.2.1.1 |
wlsxPseSlotPowerAvailableThis object indicates the total amount of power available from this PSE.ro Integer32 UNITS "watts" .1.3.6.1.4.1.14823.2.2.1.18.1.2.1.2 |
wlsxPseSlotPowerConsumptionThis object indicates the total amount of power consumed from this PSE.ro Integer32 UNITS "watts" .1.3.6.1.4.1.14823.2.2.1.18.1.2.1.3 |
wlsxPseSlotGuardBandThis object indicates the power left unused to be provided in case of spikes in the amount of power used.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.18.1.2.1.4 |
wlsxPseSlotPoEManagementModeThis object indicates the PSE management mode. A value of dynamic(1) indicates that it is dynamic power management. A value of static(2) indicates that it is static power management. A value of class(3) indicates that it is a Class based power management.ro Enumeration .1.3.6.1.4.1.14823.2.2.1.18.1.2.1.5 |
wlsxPoEMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.18.2 |
wlsxPoEMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.18.2.1 |
wlsxPoEMIBComplianceThis is the statement of compliance. Unknown .1.3.6.1.4.1.14823.2.2.1.18.2.1.1 |
wlsxPoEMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.18.2.2 |
wlsxPoEMIBPortGroupThis group provides the details of all the Power ethernet ports on the device. Unknown .1.3.6.1.4.1.14823.2.2.1.18.2.2.1 |
wlsxPoEMIBMainPseGroupThis group provides the details of the PSE entry. Unknown .1.3.6.1.4.1.14823.2.2.1.18.2.2.2 |
wlsxPoEMIBNotificationsGroupThis group gives the collection of Notifications related to power consumption on an port. Unknown .1.3.6.1.4.1.14823.2.2.1.18.2.2.3 |
More MIBs from Aruba
Browse all ArubaMIBs →WLSX-WLAN-MIB
The WLSX-WLAN-MIB enables SNMP monitoring of Wireless Management System (WMS) parameters and operational states on Aruba wireless controllers, specifically tracking WLAN configuration, client association metrics, and radio interface performance data.
433 objects→
AI-AP-MIB
The AI-AP-MIB module enables SNMP-based monitoring and management of Aruba Instant Access Points, specifically tracking wireless interface states, client association counts, radio utilization, and access point health metrics within an Aruba Instant virtual controller environment.
429 objects→
WLSX-TRAP-MIB
The WLSX-TRAP-MIB module defines the structure for network event notifications and asynchronous alerts generated by the switch, enabling monitoring systems to detect and process specific hardware or software state changes. It facilitates the transmission of critical operational data, such as link status transitions, authentication failures, and resource threshold breaches, to an SNMP management station for real-time fault analysis.
399 objects→
AP80-PRIVATE-MIB
Standard SNMP MIB module defining data structures for AP80-PRIVATE-MIB.
326 objects→
WLSR-AP-MIB
The WLSR-AP-MIB module facilitates SNMP-based monitoring and management of Wireless LAN Switch Router (WLSR) Access Points and Air Monitors, providing visibility into interface status, radio statistics, client association counts, and RF interference metrics.
283 objects→
LANtern-MIB
Standard SNMP MIB module defining data structures for LANtern-MIB.
255 objects→