WLSX-MESH-MIB
Imported Objects
Objects
23 total| Object Name |
|---|
wlsxMeshMIBThis MIB module defines MIB objects which provides
information about Mesh portal and topology
in the Aruba controller. MODULE-IDENTITY .1.3.6.1.4.1.14823.2.2.1.13 |
wlsxMeshInfoGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.13.1 |
wlsxMeshNodeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.13.1.1 |
wlsxMeshNodeTotalTotal Number of mesh nodes in the controller.ro Unsigned32 .1.3.6.1.4.1.14823.2.2.1.13.1.1.1 |
wlsxMeshNodeTableThis table lists Mesh Node Info. SEQUENCE OF MeshEntry .1.3.6.1.4.1.14823.2.2.1.13.1.1.2 |
wlsxMeshNodeEntry MeshEntry .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1 |
wlsxMeshRoleMesh rolerw ArubaMeshRole (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.1 |
wlsxMeshNodeParentWired MAC address of mesh node's parentro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.2 |
wlsxMeshNodeChildrenCountMesh node children countro Unsigned32 .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.3 |
wlsxMeshNodeClusterMesh cluster name.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.4 |
wlsxMeshNodeRfBandMesh node rf bandro ArubaPhyType (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.5 |
wlsxMeshNodePathCostMesh topology path costro Integer32 .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.6 |
wlsxMeshNodeNodeCostMesh topology node costro Integer32 .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.7 |
wlsxMeshNodeLinkCostMesh topology link costro Integer32 .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.8 |
wlsxMeshNodeHopCountMesh topology hop count.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.9 |
wlsxMeshSNRSignal-to-noise ratio mesh point sees its parent at.ro Unsigned32 .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.10 |
wlsxMeshTxRateTransmit rate for mesh-uplink [mbps].ro Unsigned32 .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.11 |
wlsxMeshRxRateReceive rate for mesh-uplink [mbps].ro Unsigned32 .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.12 |
wlsxMeshUplinkAgeTime elapsed since the mesh-uplink was formed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.13 |
wlsxMeshNumRecoveryChildrenThe number of children in recovery this mesh node has.ro Unsigned32 .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.14 |
wlsxMeshTopologyUpdateAgeTime elapsed since the last mesh topology update was received from this node.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.15 |
wlsxMeshIsRecoveryTrue if this mesh point is in recovery.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.16 |
wlsxMeshIs11nTrue if this mesh node is 11n-enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.17 |
More MIBs from Aruba
Browse all ArubaMIBs →The WLSX-WLAN-MIB enables SNMP monitoring of Wireless Management System (WMS) parameters and operational states on Aruba wireless controllers, specifically tracking WLAN configuration, client association metrics, and radio interface performance data.
The AI-AP-MIB module enables SNMP-based monitoring and management of Aruba Instant Access Points, specifically tracking wireless interface states, client association counts, radio utilization, and access point health metrics within an Aruba Instant virtual controller environment.
The WLSX-TRAP-MIB module defines the structure for network event notifications and asynchronous alerts generated by the switch, enabling monitoring systems to detect and process specific hardware or software state changes. It facilitates the transmission of critical operational data, such as link status transitions, authentication failures, and resource threshold breaches, to an SNMP management station for real-time fault analysis.
Standard SNMP MIB module defining data structures for AP80-PRIVATE-MIB.
The WLSR-AP-MIB module facilitates SNMP-based monitoring and management of Wireless LAN Switch Router (WLSR) Access Points and Air Monitors, providing visibility into interface status, radio statistics, client association counts, and RF interference metrics.
Standard SNMP MIB module defining data structures for LANtern-MIB.