WLSX-HA-MIB
AI MIB Summary
The WLSX-HA-MIB module enables SNMP monitoring of High Availability cluster states, failover status, and synchronization metrics on Aruba Wireless LAN Controllers. It provides specific visibility into HA node roles, redundancy health, and failover event counters to ensure controller cluster resilience.
This MIB module defines MIB objects which provide information about High Availability on Aruba controller.
Main OID:
wlsxHaMIB.1.3.6.1.4.1.14823.2.2.1.20
63
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
63 total| Object Name |
|---|
wlsxHaMIBThis MIB module defines MIB objects which provide information about High Availability on Aruba controller. MODULE-IDENTITY .1.3.6.1.4.1.14823.2.2.1.20 |
wlsxHighAvalabilityInfoGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.20.1 |
wlsxHighAvalabilityConfigTableThis Table lists High Avalability configuration on the Aruba controller. SEQUENCE OF WlsxHighAvalabilityConfigEntry .1.3.6.1.4.1.14823.2.2.1.20.1.1 |
wlsxHighAvalabilityConfigEntryHA profile config entry WlsxHighAvalabilityConfigEntry .1.3.6.1.4.1.14823.2.2.1.20.1.1.1 |
haProfileNameThe name of the HA profile. DisplayString .1.3.6.1.4.1.14823.2.2.1.20.1.1.1.1 |
haMembershipThe name of the HA profile enabled.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.20.1.1.1.2 |
haStateThe HA state.ro ArubaEnableValue (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.20.1.1.1.3 |
haRoleThe HA role of the controller.ro ArubaHaRole (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.20.1.1.1.4 |
haPreemptionHA preemption.ro ArubaEnableValue (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.20.1.1.1.5 |
haOversubscriptionStandby capacity extension.ro ArubaEnableValue (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.20.1.1.1.6 |
haStateSyncThe HA state sync.ro ArubaEnableValue (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.20.1.1.1.7 |
haPresharedKeyThe IPSec key for statesync.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.20.1.1.1.8 |
haIntercontrollerHbtThe state of intercontroller heart beat.ro ArubaEnableValue (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.20.1.1.1.9 |
haHbtThresholdIntercontroller hbt threshold above which it can trigger HA failover.ro Unsigned32 .1.3.6.1.4.1.14823.2.2.1.20.1.1.1.10 |
haHbtIntervalThe frequency of inter controller heart beat.ro Unsigned32 .1.3.6.1.4.1.14823.2.2.1.20.1.1.1.11 |
wlsxHighAvalabilityApTableThis Table lists High Avalability AP counts on the Aruba controller. SEQUENCE OF WlsxHighAvalabilityApEntry .1.3.6.1.4.1.14823.2.2.1.20.1.2 |
wlsxHighAvalabilityApEntryHA AP entry WlsxHighAvalabilityApEntry .1.3.6.1.4.1.14823.2.2.1.20.1.2.1 |
haActiveAPsThe number of active APs.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.2.1.1 |
haStandbyAPsThe number of standby APs.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.2.1.2 |
haTotalAPsThe total number of APs.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.2.1.3 |
wlsxIntercontrollerHbtTableThis Table lists inter controller heart beat status. SEQUENCE OF WlsxIntercontrollerHbtEntry .1.3.6.1.4.1.14823.2.2.1.20.1.3 |
wlsxIntercontrollerHbtEntryHA hbt entry WlsxIntercontrollerHbtEntry .1.3.6.1.4.1.14823.2.2.1.20.1.3.1 |
haActiveCtrlThe IP address of the actve controller(Key). DisplayString .1.3.6.1.4.1.14823.2.2.1.20.1.3.1.1 |
haActiveCtrlIpThe IP address of the actve controller.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.20.1.3.1.2 |
haReferenceCntThe number of standby APs.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.3.1.3 |
haTotalHbtRequestsSentThe total number of hbt requests sent.ro Counter32 .1.3.6.1.4.1.14823.2.2.1.20.1.3.1.4 |
haTotalHbtResponsesRcvdThe total number of heart beat responses received.ro Counter32 .1.3.6.1.4.1.14823.2.2.1.20.1.3.1.5 |
haLastMissedHbtCntThe number of heart beat last missed.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.3.1.6 |
haLastHbtMissedTimeThe timestamp of last missed hbt.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.20.1.3.1.7 |
wlsxStateSyncTableThis Table lists the counts of active/replicated pmk-cache and key-cache entries related to HA state sync. SEQUENCE OF WlsxStateSyncEntry .1.3.6.1.4.1.14823.2.2.1.20.1.4 |
wlsxStateSyncEntryHA state sync entry WlsxStateSyncEntry .1.3.6.1.4.1.14823.2.2.1.20.1.4.1 |
haActivePmkCacheEntriesThe number of active pmk cache entries.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.4.1.1 |
haReplicatedPmkCacheEntriesThe number of replicated pmk cache entries.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.4.1.2 |
haTotalPmkCacheEntriesThe total number of pmk cache entries.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.4.1.3 |
haActiveKeyCacheEntriesThe number of active key cache entries.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.4.1.4 |
haReplicatedKeyCacheEntriesThe nuber of replicated key cache entries.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.4.1.5 |
haTotalKeyCacheEntriesThe total number of key cache entries.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.4.1.6 |
wlsxHighAvalabilityTunnelTableThis table lists the total number of High Availability acitve/standby tunnels and AP heart beat tunnels on the Aruba controller. SEQUENCE OF WlsxHighAvalabilityTunnelEntry .1.3.6.1.4.1.14823.2.2.1.20.1.5 |
wlsxHighAvalabilityTunnelEntryHA tunnel entry WlsxHighAvalabilityTunnelEntry .1.3.6.1.4.1.14823.2.2.1.20.1.5.1 |
haActiveVapTunnelsThe number of active per VAP GRE tunnels.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.5.1.1 |
haStandbyVapTunnelsThe number of standby per VAP GRE tunnels.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.5.1.2 |
haTotalVapTunnelsThe total number of per VAP GRE tunnels.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.5.1.3 |
haAPHbtTunnelsThe number of AP hbt GRE tunnels.ro Gauge32 .1.3.6.1.4.1.14823.2.2.1.20.1.5.1.4 |
wlsxHighAvalabilityTraps OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.20.2 |
wlsxHaTrapObjectsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.20.2.1 |
wlsxHaV4StatusThis object is used in the traps to indicate the IPv4 status of High Availability.ro ArubaEnableValue (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.20.2.1.1 |
wlsxHaV4RoleThis object is used in the traps to indicate the IPv4 HA role of the controller.ro ArubaHaRole (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.20.2.1.2 |
wlsxHaV6StatusThis object is used in the traps to indicate the IPv6 status of High Availability.ro ArubaEnableValue (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.20.2.1.3 |
wlsxHaV6RoleThis object is used in the traps to indicate the IPv6 HA role of the controller.ro ArubaHaRole (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.20.2.1.4 |
wlsxHaAPNameThis object is used in the traps to indicate name of an AP.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.20.2.1.5 |
wlsxHaActiveControllerIpThis object is used in the traps to indicate the active controller IP address.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.20.2.1.6 |
wlsxHaStandbyControllerIpThis object is used in the traps to indicate the standby controller IP address.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.20.2.1.7 |
wlsxTrapHaConnectivityStatusThis object is used in the traps to indicate standby controller connectivity status of an AP.ro ArubaHaConnectivityStatus (ARUBA-TC) .1.3.6.1.4.1.14823.2.2.1.20.2.1.8 |
wlsxTrapHaIntercontrollerHbtMissCntThis object is used in the traps to indicate the number of intercontroller heart beat miss.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.20.2.1.9 |
wlsxTrapHaHbtMissTimeStampThis object is used in the traps to indicate the time stamp of intercontroller heart beat miss.ro DisplayString .1.3.6.1.4.1.14823.2.2.1.20.2.1.10 |
wlsxTrapHaStandbyApCntThis object is used in the traps to indicate the number of standby APs on standby controller.ro Integer32 .1.3.6.1.4.1.14823.2.2.1.20.2.1.11 |
wlsxHaTrapDefinitionGroup OBJECT IDENTIFIER .1.3.6.1.4.1.14823.2.2.1.20.2.2 |
wlsxHaStateThis trap indicates that HA state has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.20.2.2.1 |
wlsxHaStandbyIpSentFailedThis trap indicates that standby IP is sent to an AP failed NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.20.2.2.2 |
wlsxHaStandbyConnectivityStateThis trap indicates the standby connectivity status for an AP. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.20.2.2.3 |
wlsxHaIntercontrollerHbtMissThis trap indicates around half of the threshold intercontroller hearbeat missed with serving controller. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.20.2.2.4 |
wlsxHaFailoverTriggerThis trap indicates that standby controller has triggered HA failover to aps belonging to a particular serving controller with which intercontroller heart beat missed above threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.20.2.2.5 |
wlsxHaFailoverRequestFromApThis trap indicates that an ap sent failover request to the controller. This could be because of AP missing hbt with serving controller, on receiving failover request from standby controller or AP trying to preempt back to active controller NOTIFICATION-TYPE .1.3.6.1.4.1.14823.2.2.1.20.2.2.6 |
More MIBs from Aruba
Browse all ArubaMIBs →WLSX-WLAN-MIB
The WLSX-WLAN-MIB enables SNMP monitoring of Wireless Management System (WMS) parameters and operational states on Aruba wireless controllers, specifically tracking WLAN configuration, client association metrics, and radio interface performance data.
433 objects→
AI-AP-MIB
The AI-AP-MIB module enables SNMP-based monitoring and management of Aruba Instant Access Points, specifically tracking wireless interface states, client association counts, radio utilization, and access point health metrics within an Aruba Instant virtual controller environment.
429 objects→
WLSX-TRAP-MIB
The WLSX-TRAP-MIB module defines the structure for network event notifications and asynchronous alerts generated by the switch, enabling monitoring systems to detect and process specific hardware or software state changes. It facilitates the transmission of critical operational data, such as link status transitions, authentication failures, and resource threshold breaches, to an SNMP management station for real-time fault analysis.
399 objects→
AP80-PRIVATE-MIB
Standard SNMP MIB module defining data structures for AP80-PRIVATE-MIB.
326 objects→
WLSR-AP-MIB
The WLSR-AP-MIB module facilitates SNMP-based monitoring and management of Wireless LAN Switch Router (WLSR) Access Points and Air Monitors, providing visibility into interface status, radio statistics, client association counts, and RF interference metrics.
283 objects→
LANtern-MIB
Standard SNMP MIB module defining data structures for LANtern-MIB.
255 objects→