Home/Catalog/VM-MIB

VM-MIB

This MIB module is for use in managing a hypervisor and virtual machines controlled by the hypervisor. Copyright (c) 2015 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
165
Objects
Active
Status
5
Dependencies

Imported Objects

RFC1155-SMI
RFC-1155-SMI
RFC-1212
RFC-1213
RFC-1215

Objects

165 total
Object Name
dell
OBJECT IDENTIFIER
.1.3.6.1.4.1.674
RFC-1155-SMI
Unknown
.1.3.6.1.4.1.674
server
OBJECT IDENTIFIER
.1.3.6.1.4.1.674.10890
drac2
OBJECT IDENTIFIER
.1.3.6.1.4.1.674.10890.5
identification
OBJECT IDENTIFIER
.1.3.6.1.4.1.674.10890.5.1
idManufacturerThe name of the manufacturer that produces this module.ro
DisplayString
.1.3.6.1.4.1.674.10890.5.1.1
idProductThe name of the product that produces this module.ro
DisplayString
.1.3.6.1.4.1.674.10890.5.1.2
idAgentRevMajorThe major revision level of the agent that implements this MIB.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.1.3
idAgentRevMinorThe minor revision level of the agent that implements this MIB.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.1.4
idMibRevMajorThe major revision level of this MIB. A change in the major revision level could mean a possible compatibility problem with older versions of the MIB.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.1.5
idMibRevMinorThe minor revision level of this MIB. A change in the minor revision level may represent some minor additional support, changes to documenta- tion or fixes to errors in a previous revision. Backward compatibility is maintained as long as the major revision level is the same.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.1.6
module
OBJECT IDENTIFIER
.1.3.6.1.4.1.674.10890.5.2
modNumberThe present number of rows in the module table.ro
Gauge
.1.3.6.1.4.1.674.10890.5.2.1
modTableEach row describes a module in the system that is supplying environmental data or supporting management via the SNMP agent. There may be only one row in this table, but there must be at least one row.
SEQUENCE OF ModEntry
.1.3.6.1.4.1.674.10890.5.2.2
modEntry
ModEntry
.1.3.6.1.4.1.674.10890.5.2.2.1
modIndexIndex of the module entry.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.2.2.1.1
modFwRevMajorThis is the firmware major version.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.2.2.1.2
modFwRevMinorThis is the firmware minor version.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.2.2.1.3
modTypeThe type of this module.ro
Enumeration
.1.3.6.1.4.1.674.10890.5.2.2.1.4
modFwRelDateThe release date of the firmware.ro
DisplayString
.1.3.6.1.4.1.674.10890.5.2.2.1.5
modPciBridgePCI bridge description.ro
DisplayString
.1.3.6.1.4.1.674.10890.5.2.2.1.6
modNetworkCtrlNetwork Controller informationro
DisplayString
.1.3.6.1.4.1.674.10890.5.2.2.1.7
modPcmciaHostDescribes the PCMCIA host controller.ro
DisplayString
.1.3.6.1.4.1.674.10890.5.2.2.1.8
modPcCardMfgrDescribes the manufacturer of the PC Card.ro
DisplayString
.1.3.6.1.4.1.674.10890.5.2.2.1.9
modPcCardNameThe name of the PC Card.ro
DisplayString
.1.3.6.1.4.1.674.10890.5.2.2.1.10
modBatteryThe battery description.ro
DisplayString
.1.3.6.1.4.1.674.10890.5.2.2.1.11
modVoltCountTotal number of volatges to monitor.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.2.2.1.12
modTempCountTotal number of temparature zone to monitor.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.2.2.1.13
modFanCountTotal number of fans to monitor.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.2.2.1.14
modSwitchCountTotal number of switch inputs associated with this module.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.2.2.1.15
modFaultCountTotal number of fault inputs associated with this module.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.2.2.1.16
modUpTimeLength of time since last system power-up or last time the system was reset (whichever is most recent). This up-time is relative only to the module itself.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.674.10890.5.2.2.1.17
modStartDelayDelay in minutes to look for auto reset.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.2.2.1.18
modRecoveryTimeoutTimeout for auto server recovery.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.2.2.1.19
modAutoRecoveryEnableAutoRecovery enable / disable.rw
Enumeration
.1.3.6.1.4.1.674.10890.5.2.2.1.20
modHeartBeatEnableHeartbeat enable / disable.rw
Enumeration
.1.3.6.1.4.1.674.10890.5.2.2.1.21
modAccessControlThe access control of the card.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.2.2.1.22
modEthernetAddressThis is the Ethernet address of the DRAC.ro
DisplayString
.1.3.6.1.4.1.674.10890.5.2.2.1.23
configAdmin
OBJECT IDENTIFIER
.1.3.6.1.4.1.674.10890.5.3
cfgAdminNumberThe present number of rows in the configuration table.ro
Gauge
.1.3.6.1.4.1.674.10890.5.3.1
cfgAdminTableThis table contains configuration parameter information.
SEQUENCE OF CfgAdminEntry
.1.3.6.1.4.1.674.10890.5.3.2
cfgAdminEntryEach row contains parameters related to a configuration set.
CfgAdminEntry
.1.3.6.1.4.1.674.10890.5.3.2.1
cfgAdminModIndexA link into the module table (modTable). This identifies which device this configuration set is associated with.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.3.2.1.1
cfgAdminIndexThis column is used to identify a particular configuration set.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.3.2.1.2
cfgAdminAliasThe log on alias of an administrator.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.3.2.1.3
cfgAdminPasswordThe log on password of an administrator.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.3.2.1.4
cfgAdminSessionCallbackThe number to call back for a session request.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.3.2.1.5
cfgAdminPagerNumberThe pager number to call for alert condition notification.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.3.2.1.6
cfgAdminPagerSubscriberThe pager subscriber string for alpha-numeric paging.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.3.2.1.7
cfgAdminPagerTypeThe paging mechanism, numeric or alpha-numeric .rw
Enumeration
.1.3.6.1.4.1.674.10890.5.3.2.1.8
cfgAdminPagerMaskThe pager mask. This describes the alert notification enable/disable for diffrent level of severity.rw
INTEGER
.1.3.6.1.4.1.674.10890.5.3.2.1.9
cfgAdminCustomPagerCodeThe numeric/alpha-numeric code to be sent out in case of alert notification using pager.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.3.2.1.10
cfgAdminTestPagerThis variable is to test the pager.rw
INTEGER
.1.3.6.1.4.1.674.10890.5.3.2.1.11
configAlert
OBJECT IDENTIFIER
.1.3.6.1.4.1.674.10890.5.4
cfgAlertNumberThe present number of rows in the configuration table.ro
Gauge
.1.3.6.1.4.1.674.10890.5.4.1
cfgAlertTableThis table contains configuration parameter information.
SEQUENCE OF CfgAlertEntry
.1.3.6.1.4.1.674.10890.5.4.2
cfgAlertEntryEach row contains parameters related to a configuration set.
CfgAlertEntry
.1.3.6.1.4.1.674.10890.5.4.2.1
cfgAlertModIndexA link into the module table (modTable). This identifies which device this configuration set is associated with.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.4.2.1.1
cfgAlertIndexThis column is used to identify a particular configuration set.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.4.2.1.2
cfgAlertTrapSendIPAddressThe IP address of trap destination.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.4.2.1.3
cfgAlertTrapSendCommunityThe community name for sending trap.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.4.2.1.4
cfgAlertTrapCallBackNumberThe callback number in case of alert.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.4.2.1.5
configNetwork
OBJECT IDENTIFIER
.1.3.6.1.4.1.674.10890.5.5
cfgNetNumberThe present number of rows in the configuration table.ro
Gauge
.1.3.6.1.4.1.674.10890.5.5.1
cfgNetTableThis table contains configuration parameter information.
SEQUENCE OF CfgNetEntry
.1.3.6.1.4.1.674.10890.5.5.2
cfgNetEntryEach row contains parameters related to a configuration set.
CfgNetEntry
.1.3.6.1.4.1.674.10890.5.5.2.1
cfgNetModIndexA link into the module table (modTable). This identifies which device this configuration set is associated with.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.5.2.1.1
cfgNetIndexThis column is used to identify a particular configuration set.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.5.2.1.2
cfgNetIPAddressThe Internet Protocol address of this network port.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.5.2.1.3
cfgNetSubnetMaskThe Internet Protocol subnet mask of this network port.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.5.2.1.4
cfgNetGatewayThe Internet Protocol address of the LAN gateway.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.5.2.1.5
configModem
OBJECT IDENTIFIER
.1.3.6.1.4.1.674.10890.5.6
cfgModemNumberThe present number of rows in the configuration table.ro
Gauge
.1.3.6.1.4.1.674.10890.5.6.1
cfgModemTableThis table contains configuration parameter information.
SEQUENCE OF CfgModemEntry
.1.3.6.1.4.1.674.10890.5.6.2
cfgModemEntryEach row contains parameters related to a configuration set.
CfgModemEntry
.1.3.6.1.4.1.674.10890.5.6.2.1
cfgModemModIndexA link into the module table (modTable). This identifies which device this configuration set is associated with.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.6.2.1.1
cfgModemIndexThis column is used to identify a particular configuration set.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.6.2.1.2
cfgModemBaudRateBaud rate.rw
INTEGER
.1.3.6.1.4.1.674.10890.5.6.2.1.3
cfgModemDialModeDial mode.rw
INTEGER
.1.3.6.1.4.1.674.10890.5.6.2.1.4
cfgModemExtraInitStringExtra initialization string.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.6.2.1.5
cfgModemPwrOnDelayPower-on delay.rw
INTEGER
.1.3.6.1.4.1.674.10890.5.6.2.1.6
cfgModemSignalDelaySignal delay.rw
INTEGER
.1.3.6.1.4.1.674.10890.5.6.2.1.7
cfgModemRingDelayRing delay.rw
INTEGER
.1.3.6.1.4.1.674.10890.5.6.2.1.8
cfgModemCDDelayCD delay.rw
INTEGER
.1.3.6.1.4.1.674.10890.5.6.2.1.9
cfgModemResponseDelayResponse delay.rw
INTEGER
.1.3.6.1.4.1.674.10890.5.6.2.1.10
cfgModemHangUpDelayHang up delay.rw
INTEGER
.1.3.6.1.4.1.674.10890.5.6.2.1.11
cfgModemConnectTimeoutConnect timeout.rw
INTEGER
.1.3.6.1.4.1.674.10890.5.6.2.1.12
cfgModemDetectTimeoutDetectTimeout.rw
INTEGER
.1.3.6.1.4.1.674.10890.5.6.2.1.13
control
OBJECT IDENTIFIER
.1.3.6.1.4.1.674.10890.5.7
ctlNumberThe present number of rows in the control table.ro
Gauge
.1.3.6.1.4.1.674.10890.5.7.1
ctlTableThis table contains control parameter information.
SEQUENCE OF CtlEntry
.1.3.6.1.4.1.674.10890.5.7.2
ctlEntryEach row contains parameters related to a control set.
CtlEntry
.1.3.6.1.4.1.674.10890.5.7.2.1
ctlModIndexA link into the module table (modTable). This identifies which device this control set is associated with.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.7.2.1.1
ctlIndexThis column is used to identify a particular control set.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.7.2.1.2
ctlSystemResetSetting this variable causes software or hardware to reset to the state it has immediately after a power-on boot. Applications are either reset or shutdown, depending on what is normal for the module.rw
INTEGER -- {normal(0), reset(1) }
.1.3.6.1.4.1.674.10890.5.7.2.1.3
ctlSystemShutdownSetting this variable causes the OS for a graceful shutdown.rw
INTEGER -- { normal(0), shutdown(1) }
.1.3.6.1.4.1.674.10890.5.7.2.1.4
ctlSystemPwrCycleSetting this variable causes the software or hardware to go to the state it has before an operating system boots (if possible), turns the power to the hardware off, turns the power to the hardware back on, and then boots to the normal running state.rw
INTEGER -- { normal(0), cycle(1) }
.1.3.6.1.4.1.674.10890.5.7.2.1.5
ctlCardShutdownThis variable is to shutdown the card.rw
INTEGER -- { normal(0), shutdown(1) }
.1.3.6.1.4.1.674.10890.5.7.2.1.6
ctlCardSoftResetThis variable is to generate a software reset to the card.rw
INTEGER -- { normal(0), shutdown(1) }
.1.3.6.1.4.1.674.10890.5.7.2.1.7
ctlCardHardResetThis variable is to generate a hardware reset to the card.rw
INTEGER -- { normal(0), shutdown(1) }
.1.3.6.1.4.1.674.10890.5.7.2.1.8
ctlCardFlushGPNVThis variable is to flush the content of the General Purpose Non Volatile (GPNV) memory of DRAC2.rw
INTEGER -- { normal(0), flush(1) }
.1.3.6.1.4.1.674.10890.5.7.2.1.9
voltage
OBJECT IDENTIFIER
.1.3.6.1.4.1.674.10890.5.20
voltNumberThe present number of rows in the voltage table.ro
Gauge
.1.3.6.1.4.1.674.10890.5.20.1
voltTableThis table contains voltage measurement information.
SEQUENCE OF VoltEntry
.1.3.6.1.4.1.674.10890.5.20.2
voltEntryEach row contains parameters related to a voltage measurement channel.
VoltEntry
.1.3.6.1.4.1.674.10890.5.20.2.1
voltModIndexA link into the module table (modTable). This identifies which environmental device is associated with this voltage.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.20.2.1.1
voltIndexThis column is used to identify a particular voltage measurement channel.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.20.2.1.2
voltTypeThe type of the voltage measurement channel.ro
Enumeration
.1.3.6.1.4.1.674.10890.5.20.2.1.3
voltDescrA description of the voltage measurement channel.ro
DisplayString
.1.3.6.1.4.1.674.10890.5.20.2.1.4
voltReadingThe measured voltage.ro
DisplayString
.1.3.6.1.4.1.674.10890.5.20.2.1.5
voltLimitLowCriticalThe low limit for the measured voltage. If the measured value falls below this limit a trap is sent.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.20.2.1.6
voltLimitHighCriticalThe high limit for the measured voltage. If the measured value rises above this limit a trap is sent.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.20.2.1.7
voltLimitLowWarningThe low limit for the measured voltage. If the measured value falls below this limit a trap is sent.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.20.2.1.8
voltLimitHighWarningThe high limit for the measured voltage. If the measured value rises above this limit a trap is sent.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.20.2.1.9
voltItemStatusThis is the status of the particular voltage itemro
Enumeration
.1.3.6.1.4.1.674.10890.5.20.2.1.10
voltLastAlarmThe time of the last alarm condition.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.674.10890.5.20.2.1.11
voltTrapSystemName of the system generating the alertro
OCTET STRING
.1.3.6.1.4.1.674.10890.5.20.2.1.12
voltTrapGroupDMI group generating the alertro
OCTET STRING
.1.3.6.1.4.1.674.10890.5.20.2.1.13
voltTrapMessageAlert messagero
OCTET STRING
.1.3.6.1.4.1.674.10890.5.20.2.1.14
temperature
OBJECT IDENTIFIER
.1.3.6.1.4.1.674.10890.5.21
tempNumberThe present number of rows in the temperature table.ro
Gauge
.1.3.6.1.4.1.674.10890.5.21.1
tempTableThis table contains temperature measurement information.
SEQUENCE OF TempEntry
.1.3.6.1.4.1.674.10890.5.21.2
tempEntryEach row contains parameters related to a temperature measurement channel.
TempEntry
.1.3.6.1.4.1.674.10890.5.21.2.1
tempModIndexA link into the module table (modTable). This identifies which environmental device this temperature is associated with.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.21.2.1.1
tempIndexThis column is used to identify a particular temperature measurement channel.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.21.2.1.2
tempTypeThe type of the voltage measurement channel.ro
Enumeration
.1.3.6.1.4.1.674.10890.5.21.2.1.3
tempDescrA description of the temperature measurement channel.ro
DisplayString
.1.3.6.1.4.1.674.10890.5.21.2.1.4
tempReadingThe measured temperature.ro
DisplayString
.1.3.6.1.4.1.674.10890.5.21.2.1.5
tempLowCriticalThe high limit for the measured temperature. If the measured value rises above this limit a trap is sent.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.21.2.1.6
tempHighCriticalThe high limit for the measured temperature. If the measured value rises above this limit a trap is sent.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.21.2.1.7
tempLowWarningThe high limit for the measured temperature. If the measured value rises above this limit a trap is sent.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.21.2.1.8
tempHighWarningThe high limit for the measured temperature. If the measured value rises above this limit a trap is sent.rw
DisplayString
.1.3.6.1.4.1.674.10890.5.21.2.1.9
tempItemStatusThis is the status of the particular temperature itemro
Enumeration
.1.3.6.1.4.1.674.10890.5.21.2.1.10
tempLastAlarmThe time of the last alarm condition.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.674.10890.5.21.2.1.11
tempTrapSystemName of the system generating the alertro
OCTET STRING
.1.3.6.1.4.1.674.10890.5.21.2.1.12
tempTrapGroupDMI group generating the alertro
OCTET STRING
.1.3.6.1.4.1.674.10890.5.21.2.1.13
tempTrapMessageAlert messagero
OCTET STRING
.1.3.6.1.4.1.674.10890.5.21.2.1.14
battery
OBJECT IDENTIFIER
.1.3.6.1.4.1.674.10890.5.25
batteryNumberThe present number of rows in the battery table.ro
Gauge
.1.3.6.1.4.1.674.10890.5.25.1
batteryTableThis table contains battery information.
SEQUENCE OF BatteryEntry
.1.3.6.1.4.1.674.10890.5.25.2
batteryEntryEach row contains parameters related to a battery.
BatteryEntry
.1.3.6.1.4.1.674.10890.5.25.2.1
batteryModIndexA link into the module table (modTable). This identifies which device this battery is associated with.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.25.2.1.1
batteryIndexThis column is used to identify a particular battery.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.25.2.1.2
batteryTypeThe type of the battery input.ro
Enumeration
.1.3.6.1.4.1.674.10890.5.25.2.1.3
batteryDescrA description of the battery.ro
DisplayString
.1.3.6.1.4.1.674.10890.5.25.2.1.4
batteryChargeStatusCharging status of the battery.ro
Enumeration
.1.3.6.1.4.1.674.10890.5.25.2.1.5
batteryFastChargeCountFast charge counts of the battery.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.25.2.1.6
batteryChargePercentThe percentage of charge remaining in the battery.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.25.2.1.7
batteryStatusThe status of the battery.ro
Enumeration
.1.3.6.1.4.1.674.10890.5.25.2.1.8
batteryLastAlarmThe time of the last alarm condition.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.674.10890.5.25.2.1.9
batteryTrapSystemName of the system generating the alertro
OCTET STRING
.1.3.6.1.4.1.674.10890.5.25.2.1.10
batteryTrapGroupDMI group generating the alertro
OCTET STRING
.1.3.6.1.4.1.674.10890.5.25.2.1.11
batteryTrapMessageAlert messagero
OCTET STRING
.1.3.6.1.4.1.674.10890.5.25.2.1.12
healthStatus
OBJECT IDENTIFIER
.1.3.6.1.4.1.674.10890.5.26
healthStatusNumberThe present number of rows in the battery table.ro
Gauge
.1.3.6.1.4.1.674.10890.5.26.1
healthTableThis table contains card's health information.
SEQUENCE OF HealthEntry
.1.3.6.1.4.1.674.10890.5.26.2
healthEntryEach row contains parameters related to a health status.
HealthEntry
.1.3.6.1.4.1.674.10890.5.26.2.1
healthModIndexA link into the module table (healthTable). This identifies which health status is associated with.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.26.2.1.1
healthIndexThis column is used to identify a particular haelth information.ro
INTEGER
.1.3.6.1.4.1.674.10890.5.26.2.1.2
healthTypeThe particular health status type.ro
Enumeration
.1.3.6.1.4.1.674.10890.5.26.2.1.3
overallHealthStatusAn overall report of the health of the card.ro
Enumeration
.1.3.6.1.4.1.674.10890.5.26.2.1.4
overallVoltageStatusAn ovearall report of the monitored voltages.ro
Enumeration
.1.3.6.1.4.1.674.10890.5.26.2.1.5
overallTemperatureStatusAn overall report of the monitored temperatures.ro
Enumeration
.1.3.6.1.4.1.674.10890.5.26.2.1.6
overallBatteryStatusAn overall report from the battery management.ro
Enumeration
.1.3.6.1.4.1.674.10890.5.26.2.1.7
traps
OBJECT IDENTIFIER
.1.3.6.1.4.1.674.10890.5.100
VM-MIB - SNMP MIB Reference | MIBs Explorer