DNOS-SWITCHING-MIB
The Dell Networking Private MIB for Switching
Main OID:
fastPathSwitching.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1
912
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
912 total| Object Name |
|---|
fastPathSwitchingThe Dell Networking Private MIB for Switching MODULE-IDENTITY .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1 |
fastPathSwitchingTraps OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0 |
multipleUsersTrapThis trap is sent when more than one user is logged in with
administrative access. Only applies to CLI interface. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.1 |
broadcastStormStartTrapThis trap is sent when a broadcast storm is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.2 |
broadcastStormEndTrapThis trap is sent when a broadcast storm is no longer
detected. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.3 |
linkFailureTrap NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.4 |
vlanRequestFailureTrap NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.5 |
vlanDeleteLastTrapTrap is sent when attempting to delete the last configured VLAN
or the Default VLAN. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.6 |
vlanDefaultCfgFailureTrapTrap is sent if there are failures in resetting VLAN
configuration to defaults. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.7 |
vlanRestoreFailureTrap NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.8 |
fanFailureTrap NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.9 |
stpInstanceNewRootTrapTrap is sent when this machine is a new STP Root when there is more
than one STP instance. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.10 |
stpInstanceTopologyChangeTrapTrap is sent when there is a STP topology change when there is more
than one STP instance. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.11 |
powerSupplyStatusChangeTrap NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.12 |
failedUserLoginTrapTrap is sent when a user fails to authenticate via the CLI or Web
interfaces. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.13 |
userLockoutTrapTrap is sent when a user account is locked due to consecutive failed login attempts via the CLI or Web
interfaces beyond the allowed limit. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.15 |
daiIntfErrorDisabledTrapTrap is sent once an interface is error disabled by DAI when the
incoming packet rate exceeded configured rate limit during a
burst-interval. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.16 |
stpInstanceLoopInconsistentStartTrapTrap is sent when this port in this STP instance enters
loop inconsistent state upon failure to receive a BPDU. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.17 |
stpInstanceLoopInconsistentEndTrapTrap is sent when this port in this STP instance exits
loop inconsistent state upon reception of a BPDU. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.18 |
dhcpSnoopingIntfErrorDisabledTrapTrap is sent once an interface is error disabled by DHCP Snooping when the
incoming packet rate exceeded configured rate limit during a
burst-interval. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.19 |
agentSwitchIpAddressConflictTrapIP address conflict trap signifies the reception of an ARP from
another host in the LAN that has conflicting IP address. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.20 |
agentSwitchCpuRisingThresholdTrapTrap is sent when the total CPU utilization exceeds CPU Rising
utilization threshold over the configured Rising threshold interval. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.22 |
agentSwitchCpuFallingThresholdTrapTrap is sent when the total CPU utilization falls below CPU Falling
utilization threshold over the configured falling threshold interval. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.23 |
agentSwitchCpuFreeMemBelowThresholdTrapTrap is sent when CPU Free Memory falls below the configured threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.24 |
agentSwitchCpuFreeMemAboveThresholdTrapTrap is sent when CPU Free Memory rises to 10% above the configured threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.25 |
agentSwitchStormControlTrapTrap is sent when storm control rate limit is reached. NOTIFICATION-TYPE .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.0.26 |
agentInfoGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1 |
agentInventoryGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1 |
agentInventorySysDescriptionThe switch's Inventory system description.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.1 |
agentInventoryMachineTypeType of the Machine used in the Switchro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.2 |
agentInventoryMachineModelThe switch's Machine Model.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.3 |
agentInventorySerialNumberSerial number of the switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.4 |
agentInventoryFRUNumberFRU Number of the switchro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.5 |
agentInventoryMaintenanceLevelThe switch's Inventory Maintenance Levelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.6 |
agentInventoryPartNumberThe switch's Inventory Part Numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.7 |
agentInventoryManufacturerName of the Manufacturer of this unitro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.8 |
agentInventoryBurnedInMacAddressBurned-In MAC Addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.9 |
agentInventoryOperatingSystemOperating System running on this unitro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.10 |
agentInventoryNetworkProcessingDeviceNetwork Processing Device for this unitro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.11 |
agentInventoryAdditionalPackagesLists additional functional packages available on this unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.12 |
agentInventorySoftwareVersionLists the version of software loaded on this unit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.1.13 |
agentTrapLogGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2 |
agentTrapLogTotalThe total number of traps sent since last reset.ro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.1 |
agentTrapLogTotalSinceLastViewedThe number of traps sent since last viewed.ro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.3 |
agentTrapLogTableAgent Trap Log SEQUENCE OF AgentTrapLogEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.4 |
agentTrapLogEntryAgent trap log entry AgentTrapLogEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.4.1 |
agentTrapLogIndexUnique index of trap entryro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.4.1.1 |
agentTrapLogSystemTimeSystem uptime when trap was sent.
This entry shows how long the system has been up when the trap occurred.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.4.1.2 |
agentTrapLogTrapDescription of the trap sent.ro DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.2.4.1.3 |
agentSupportedMibTableSupported MIB table SEQUENCE OF AgentSupportedMibEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.3 |
agentSupportedMibEntrySupported MIB entry AgentSupportedMibEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.3.1 |
agentSupportedMibIndexUnique index of the Supported MIB entryro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.3.1.1 |
agentSupportedMibNameThe name of the MIB (RFC or IEEE) that is supported.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.3.1.2 |
agentSupportedMibDescriptionDescription of the MIB (RFC or IEEE) that is supported.ro DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.3.1.3 |
agentSwitchCpuProcessGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4 |
agentSwitchCpuProcessMemFreeThe total memory free for utilization in KBytes.ro Integer32 UNITS "KBytes" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1 |
agentSwitchCpuProcessMemAvailableThe total memory available in KBytes.ro Integer32 UNITS "KBytes" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2 |
agentSwitchCpuProcessRisingThresholdThe CPU Rising utilization threshold in percentage. A zero percent
threshold indicates CPU Utilization Notification feature is disabled.
A notification is triggered when the total CPU utilization exceeds this
threshold over the configured Rising threshold interval.
If the Rising threshold is configured to be less than the Falling threshold,
the Falling threshold is set equal to the Rising threshold.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3 |
agentSwitchCpuProcessRisingThresholdIntervalThe CPU Rising threshold interval in seconds.
The time interval is configured in multiples of 5 seconds.
A zero Rising interval indicates CPU Utilization Notification feature is disabled.rw Unsigned32(0|5..86400) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.4 |
agentSwitchCpuProcessFallingThresholdThe CPU Falling utilization threshold in percentage. Configuration of this
object value is optional. Value '0' is not allowed for configuration,
if the Rising threshold is non-zero. If the Falling threshold is configured
to be greater than the Rising threshold, the Rising threshold is set equal
to the Falling threshold. If the Falling threshold is not configured,
it takes the same value as the Rising threshold.
A notification is triggered when the total CPU utilization
falls below this threshold over the configured Falling threshold interval.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.5 |
agentSwitchCpuProcessFallingThresholdIntervalThe CPU Falling threshold interval in seconds. Configuration of this object
value is optional. Value '0' is not allowed for configuration,
if the Rising interval is non-zero. If the Falling interval
is not configured, it takes the same value as the Rising interval.
The time interval is configured in multiples of 5 seconds.rw Unsigned32(0|5..86400) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.6 |
agentSwitchCpuProcessFreeMemoryThresholdThe CPU Free Memory threshold in kilobytes. A zero threshold value
indicates the CPU Free Memory Notification feature is disabled.
Notifications are triggered when the CPU Free Memory falls below the
configured threshold and when it rises to 10% above the configured threshold.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.7 |
agentSwitchCpuProcessTableA table of Task and cpu utilization. SEQUENCE OF AgentSwitchCpuProcessEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8 |
agentSwitchCpuProcessEntryRepresents entry for a Task Table. AgentSwitchCpuProcessEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1 |
agentSwitchCpuProcessIndexUnique index of process table Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.1 |
agentSwitchCpuProcessNameName of the processro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.2 |
agentSwitchCpuProcessPercentageUtilizationCPU utilization per task in Percentage over a period of 5, 60, 300 seconds,
and the Rising threshold period also in seconds, if configured.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.3 |
agentSwitchCpuProcessIdProcess IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.8.1.4 |
agentSwitchCpuProcessTotalUtilizationTotal CPU utilization over a period of 5, 60, 300 seconds,
and the Rising threshold period also in seconds, if configured.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.9 |
agentSwitchCpuCosQDropGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.6 |
agentSwitchCpuCosQDropTableTable lists the number of packets dropped at each CoS queue for the CPU. SEQUENCE OF AgentSwitchCpuCosQDropEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.6.1 |
agentSwitchCpuCosQDropEntryPacket drop statistics for a CPU CoS queue. AgentSwitchCpuCosQDropEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.6.1.1 |
agentSwitchCpuCosQIndexUnique index of a CPU CoS queue. Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.6.1.1.1 |
agentSwitchCpuCosQDropsNumber of packets dropped at this CPU CoS queue because
the queue was full.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.6.1.1.2 |
agentSwitchMbufGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7 |
agentSwitchMbufsFreeNumber of message buffers currently available.ro Gauge32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.1 |
agentSwitchMbufTableTable lists information about message buffer allocation for packets arriving at the CPU. SEQUENCE OF AgentSwitchMbufEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2 |
agentSwitchMbufEntryInformation on a specific class of message buffers. AgentSwitchMbufEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1 |
agentSwitchMbufPrioMessage buffer priority. Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1.1 |
agentSwitchMbufClassNameName of this class of message buffer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1.2 |
agentSwitchMbufAllocAttemptsNumber of times the system tried to allocate a message
buffer allocation of this class.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1.3 |
agentSwitchMbufAllocFailsNumber of message buffer allocation failures for this
class of message buffer.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.7.2.1.4 |
agentPortStatsRateGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8 |
agentPortStatsRateTable SEQUENCE OF AgentPortStatsRateEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1 |
agentPortStatsRateEntry AgentPortStatsRateEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1 |
agentPortStatsRateBitsPerSecondRxThe number of bits per second received.
This value is an exponentially weighted average and is affected by the
configured agentPortLoadStatsInterval.ro Counter32 UNITS "bits" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.1 |
agentPortStatsRateBitsPerSecondTxThe number of bits per second transmitted.
This value is an exponentially weighted average and is affected by the
configured agentPortLoadStatsInterval.ro Counter32 UNITS "bits" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.2 |
agentPortStatsRatePacketsPerSecondRxThe number of packets per second received.
This value is an exponentially weighted average and is affected by the
configured agentPortLoadStatsInterval.ro Counter32 UNITS "packets" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.3 |
agentPortStatsRatePacketsPerSecondTxThe number of packets per second transmitted.
This value is an exponentially weighted average and is affected by the
configured agentPortLoadStatsInterval.ro Counter32 UNITS "packets" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.4 |
agentPortStatsRateOverflowBitsPerSecondRxThe counter in which stored the number of times
the associated agentPortStatsRateBitsPerSecondRx counter
has overflowed.ro Counter32 UNITS "bits" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.5 |
agentPortStatsRateOverflowBitsPerSecondTxThe counter in which stored the number of times
the associated agentPortStatsRateBitsPerSecondTx counter
has overflowed.ro Counter32 UNITS "bits" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.6 |
agentPortStatsRateOverflowPacketsPerSecondRxThe counter in which stored the number of times
the associated agentPortStatsRatePacketsPerSecondRx counter
has overflowed.ro Counter32 UNITS "packets" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.7 |
agentPortStatsRateOverflowPacketsPerSecondTxThe counter in which stored the number of times
the associated agentPortStatsRatePacketsPerSecondTx counter
has overflowed.ro Counter32 UNITS "packets" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.8 |
agentPortStatsRateHCBitsPerSecondRxThe number of bits per second received.
This value is an exponentially weighted average and is affected by the
configured agentPortLoadStatsInterval.ro Counter64 UNITS "bits" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.9 |
agentPortStatsRateHCBitsPerSecondTxThe number of bits per second transmitted.
This value is an exponentially weighted average and is affected by the
configured agentPortLoadStatsInterval.ro Counter64 UNITS "bits" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.10 |
agentPortStatsRateHCPacketsPerSecondRxThe number of packets per second received.
This value is an exponentially weighted average and is affected by the
configured agentPortLoadStatsInterval.ro Counter64 UNITS "packets" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.11 |
agentPortStatsRateHCPacketsPerSecondTxThe number of packets per second transmitted.
This value is an exponentially weighted average and is affected by the
configured agentPortLoadStatsInterval.ro Counter64 UNITS "packets" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.8.1.1.12 |
agentConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2 |
agentCLIConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1 |
agentLoginSessionTableA table of the switch's login session SEQUENCE OF AgentLoginSessionEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1 |
agentLoginSessionEntryLogin Session Entry AgentLoginSessionEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1 |
agentLoginSessionIndexAgent Login Session Index of the switchro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.1 |
agentLoginSessionUserNameAgent Login Session UserName of the switchro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.2 |
agentLoginSessionIPAddressAgent Login Session IP Address of the switchroobsolete IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.3 |
agentLoginSessionConnectionTypeAgent Login Session Connection Type of the switchro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.4 |
agentLoginSessionIdleTimeAgent Login Session Idle Time of the switchro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.5 |
agentLoginSessionSessionTimeAgent Login Session Time of the switchro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.6 |
agentLoginSessionStatusStatus of the user.
active(1) - This connection is active.
destroy(6) - Set to this value to disconnect this user.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.7 |
agentLoginSessionInetAddressTypeType of address agentLoginSessionInetAddress is returning.
Can be either unknown(0), ipv4(1), or ipv6 (2). Will return
unknown(0) in the case of a serial login.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.8 |
agentLoginSessionInetAddressInet Address of the connecting the user is logging in with.
Will return a zero-length string in the case of a serial login.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.1.1.9 |
agentTelnetConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2 |
agentTelnetLoginTimeoutTelnet login timeout (seconds)
Config telnet timeout will set the telnet session timeout value.
A session is active as long as the session has not remained idle for
the value set. Specify a value from 0 to 3932159.
Note: Changing the timeout value for active
sessions does not become effective until the session is reaccessed.
Any keystroke will also activate the new timeout duration.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2.1 |
agentTelnetMaxSessionsMaximum number of Telnet Sessions
Config telnet maxsessions is an integer value from 0 to 4 that specifies the
maximum number of telnet sessions that can be established.
If the value is 0, no Telnet session can be established.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2.2 |
agentTelnetAllowNewModeAllow new telnet sessions (enable or disable)
Config telnet disable means that no new Telnet sessions are to be
established. Any already established session remains active until
the session is ended or an abnormal network error ends it.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2.3 |
agentTelnetMgmtPortNumGet/Set the port no which should be used to open telnet sessions on switch.
Port No is an integer value from 1 to 65535 and the given port should not
be in use by any other service.
The default value is 23.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2.4 |
agentTelnetExecBannerStateShows/Changes EXEC banner state on Telnet session.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2.5 |
agentTelnetLoginBannerStateShows/Changes login banner state on Telnet session.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2.6 |
agentTelnetMotdBannerStateShows/Changes MOTD banner state on Telnet session.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.2.7 |
agentUserConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3 |
agentUserConfigCreateCreate a new user.
When set with a non-empty string, a new user with that name will be created.
This object will only return an empty string.
This string is limited to alpha-numeric strings (uncluding the '-' and '_' characters).rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.1 |
agentUserConfigTableUser Config Table SEQUENCE OF AgentUserConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2 |
agentUserConfigEntryUser Config Entry AgentUserConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1 |
agentUserIndexAgent User Config Index Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.1 |
agentUserNameAgent User Name.
This string is limited to alpha-numeric strings (including the '-' and '_' characters).rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.2 |
agentUserPasswordAgent User Password
This object will return an empty string even if a password is set.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.3 |
agentUserAccessModeAgent User Access Moderw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.4 |
agentUserStatusAgent User Status.
active(1) - This user account is active.
destroy(6) - Set to this value to remove this user account.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.5 |
agentUserLockoutStatusDisplays whether the user account is locked due to excessive failed login attempts.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.9 |
agentUserPasswordExpireTimeDate and time when the user's password expires (past or present). Only valid when
password aging is enabled.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.3.2.1.10 |
agentSerialGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5 |
agentSerialTimeoutagentSerialTimeout specifies the maximum connect time(in seconds)
without console activity. A value of 0 indicates that a console can
be connected indefinitely. The time range is 0 to 3932159.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.1 |
agentSerialBaudrateagentSerialBaudrate specifies the current baud rate at which
the serial port will try to connect. The available values
are 1200, 2400, 4800, 9600, 19200, 38400,57600, and 115200 baud.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.2 |
agentSerialCharacterSizeagentSerialCharacterSize specifies the number of bits in
a character. The number of bits is always 8.ro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.3 |
agentSerialHWFlowControlModeagentSerialHardwareFlowControl specifies whether hardware
flow-control is enabled or disabled. Hardware Flow Control is
always disabled.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.4 |
agentSerialStopBitsagentSerialStopBits specifies the number of Stop bits per
character. The number of Stop bits is always 1.ro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.5 |
agentSerialParityTypeagentSerialParityType specifies the Parity Method used on
the Serial Port. The Parity Method is always None.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.6 |
agentSerialExecBannerStateShows/Changes EXEC banner state on console session.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.7 |
agentSerialLoginBannerStateShows/Changes login banner state on console session.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.8 |
agentSerialMotdBannerStateShows/Changes MOTD banner state on console session.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.5.9 |
agentPasswordManagementConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6 |
agentPasswordManagementMinLengthMinimum length for user passwords
All new local user passwords must be at least this many characters in length.rw Integer32 (0 | 8..64) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.1 |
agentPasswordManagementHistoryThe number of previous passwords to store for prevention of password reuse.
This ensures that each user does not reuse passwords often. A value of 0
indicates that no previous passwords will be stored.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.2 |
agentPasswordManagementAgingThe maximum time that user passwords are valid, in days, from the time the
password is set. Once a password expires, the user will be required to enter
a new password following the first login after password expiration.
A value of 0 indicates that passwords never expire.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.3 |
agentPasswordManagementLockAttemptsThe number of allowable failed local authentication attempts before the user's
account is locked. A value of 0 indicates that user accounts will never be locked.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.4 |
agentPasswordManagementPasswordStrengthCheckConfigures Password Strength Check feature.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.5 |
agentPasswordManagementStrengthMinUpperCaseThe number of minimum allowable uppercase letters in a
password. Minimum of 0 means no restriction on that set
of characters.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.6 |
agentPasswordManagementStrengthMinLowerCaseThe number of minimum allowable lowercase letters in a
password. Minimum of 0 means no restriction on that set
of characters.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.7 |
agentPasswordManagementStrengthMinNumericNumbersThe number of minimum allowable numeric numbers in a
password. Minimum of 0 means no restriction on that set
of characters.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.8 |
agentPasswordManagementStrengthMinSpecialCharactersThe number of minimum allowable special characters in a
password. Minimum of 0 means no restriction on that set
of characters.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.9 |
agentPasswordManagementStrengthMaxConsecutiveCharactersThe number of maximum consecutive characters can be
present in a password. Maximum of 0 means disabling the
restriction.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.10 |
agentPasswordManagementStrengthMaxRepeatedCharactersThe number of maximum repeated characters can be present
in a password. Maximum of 0 means disabling the
restriction.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.11 |
agentPasswordManagementStrengthMinCharacterClassesThe number of minimum allowable character classes in a
password. Minimum of 0 means no restriction on that set
of characters.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.12 |
agentPasswordMgmtLastPasswordSetResultRetrieves the last password set Result.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.14 |
agentPasswordManagementStrengthExcludeKeywordTableRepresents Password strength restricted keywords from the configurable password. SEQUENCE OF AgentPasswordManagementStrengthExcludeKeywordEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.15 |
agentPasswordManagementStrengthExcludeKeywordEntryRepresents Password strength restricted keywords from the configurable password. AgentPasswordManagementStrengthExcludeKeywordEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.15.1 |
agentPasswordMgmtStrengthExcludeKeywordSpecifies the given keyword string restricted from the configurable password.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.15.1.1 |
agentPasswordMgmtStrengthExcludeKeywordStatusCreate the Exclude Keyword Index and configure (Create or Destroy) the keyword to it.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.6.15.1.2 |
agentCLIBannerConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.7 |
agentCLIBannerExecExec banner message string.rw OCTET STRING .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.7.1 |
agentCLIBannerLoginLogin banner message string.rw OCTET STRING .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.7.2 |
agentCLIBannerMOTDMOTD banner message string.rw OCTET STRING .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.7.3 |
agentIASUserConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8 |
agentIASUserConfigCreateCreate a new user.
When set with a non-empty string, a new user with that name will be created.
This object will only return an empty string.
This string is limited to alpha-numeric strings (including the '-' and '_' characters).rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.1 |
agentIASUserConfigTableA table for dot1x Client details and associated functionality. SEQUENCE OF AgentIASUserConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2 |
agentIASUserConfigEntryRepresents entry for port config table. AgentIASUserConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1 |
agentIASUserIndexIAS user config index. Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1.1 |
agentIASUserNameIAS user name.
This string is limited to alpha-numeric strings (including '-' and '_'
characters).rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1.2 |
agentIASUserPasswordIAS user password.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1.3 |
agentIASUserStatusIAS User Status.
active(1) - This user account is active.
destroy(6) - Set to this value to remove this user account.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.1.8.2.1.4 |
agentLagConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2 |
agentLagConfigCreateAgent LAG Create.
When this object is set with a non-empty string, a new LAG will be created
if possible with the entered string as its name. DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.1 |
agentLagSummaryConfigTableA summary table of the switch's LAG config entries SEQUENCE OF AgentLagSummaryConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2 |
agentLagSummaryConfigEntrySwitch's LAG config entry AgentLagSummaryConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1 |
agentLagSummaryLagIndexAgent LAG IfIndex.
This value corresponds with the LAG interface in the ifTable.ro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.1 |
agentLagSummaryNameAgent LAG Name.
The associated name of the LAG used during creation.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.2 |
agentLagSummaryFlushTimerAgent LAG FlushTimer.rwobsolete Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.3 |
agentLagSummaryLinkTrapAgent LAG LinkTrap.
Configures sending Link Up/Down traps when the LAG interface goes Up or Down.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.4 |
agentLagSummaryAdminModeAgent LAG AdminMode.
Administratively enables or disables this LAG interface.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.5 |
agentLagSummaryStpModeAgent LAG StpMode
Administratively enables or disables STP on this interface.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.6 |
agentLagSummaryAddPortAgent LAG AddPort.
Set to a non 0 value to add a port to the LAG. Values correspond to
ifIndex values in the ifTable.
Note: agentPortType for the port to be added must be full duplex
and the same speed as previously added port(s), if any.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.7 |
agentLagSummaryDeletePortAgent LAG DeletePort.
Set to a non 0 value to remove a port from the LAG. Values correspond to
ifIndex values in the ifTable.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.8 |
agentLagSummaryStatusAgent LAG Status.
active(1) - This LAG is enabled.
destroy(6) - Set to this value to remove the LAG.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.9 |
agentLagSummaryTypeAgent LAG Type.
static(1) - This LAG is staticly maintained.
dynamic(2) - This LAG is dynamicly maintained.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.10 |
agentLagSummaryStaticCapabilityAgent LAG Static Capability
enable(1) - Static capability is enabled for this LAG interface
disable(2) - Static capability is disabled for this LAG interfacerw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.11 |
agentLagSummaryHashModeAgent LAG Hash Mode.
This configures the hashing-mode for trunk port computation. The
following are the possible values for hashing-mode.
1 - Source MAC, VLAN, EtherType, SourceModule and Port Id.
2 - Destination MAC, VLAN, EtherType, SourceModule and Port Id.
3 - Source IP and Source TCP/UDP Port.
4 - Destination IP and Destination TCP/UDP Port.
5 - Source/Destination MAC, VLAN, EtherType, source MODID/port.
6 - Source/Destination IP and source/destination TCP/UDP Port.
7 - Enhanced hashing mode.rw INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.12 |
agentLagSummarySwitchportModerw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.13 |
agentLagSummaryMinimumActiveLinksAgent LAG Threshold.
This configures the threshold(i.e minimum number of active ports)
value for trunk port .rw INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.14 |
agentLagSummaryAccessVlanIDDescribes and Configures the VLAN ID of access switch port.
A value of 0 indicates that the switch port is not configured as
access port.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.15 |
agentLagSummaryNativeVlanIDDescribes and Configures the VLAN ID of access switch port.
Configures the Native VLAN ID of the port.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.16 |
agentLagSummaryLocalPreferenceModeAgent LAG Local Preference Mode.
Enables or disables the LAG interface's Local Preference Mode.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.17 |
agentVpcIdTo configure the port-channel (LAG) as VPC.
0 - To unconfigure the VPC on the port-channel
(or) port-channel is not configured as VPC.rw Unsigned32 (0|1..63) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.18 |
agentLagSummaryPortCounterLAG port flap counter.ro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.19 |
agentLagSummaryRateLoadIntervalThe length of time for which data is used to compute load statistics.
The value is given in seconds, and must be a multiple of 30. The allowable
range is 30 to 600 seconds.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.2.1.20 |
agentLagDetailedConfigTableA detailed table of the switch's LAG config entries SEQUENCE OF AgentLagDetailedConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3 |
agentLagDetailedConfigEntrySwitch's LAG config entry AgentLagDetailedConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1 |
agentLagDetailedLagIndexLAG indexro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.1 |
agentLagDetailedIfIndexLAG port indexro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.2 |
agentLagDetailedPortSpeedLAG port speed. See agentPortType for a description and list
of valid values.ro OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.3 |
agentLagDetailedPortStatusLAG port status.
active(1) - Actively participating in the LAG.
inactive(2) - Not participating in the LAG.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.4 |
agentLagDetailedPortCounterLAG port flap counter.ro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.3.1.5 |
agentLagConfigStaticCapabilityAgent LAG Static Capability.
Configures whether Static LAGs are supported on this device.rwobsolete Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.4 |
agentLagClearCountersClear LAG stats. Will always return 0 when read.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.2.5 |
agentServicePortConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4 |
agentServicePortIPAddressThe switch's ServicePort ip addressrw IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.1 |
agentServicePortSubnetMaskThe switch's ServicePort subnet maskrw IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.2 |
agentServicePortDefaultGatewayThe switch's ServicePort default gatewayrw IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.3 |
agentServicePortBurnedInMacAddressThe switch's ServicePort Burned-In MAC addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.4 |
agentServicePortConfigProtocolThe switch's ServicePort config protocolrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.5 |
agentServicePortProtocolDhcpRenewThe switch's ServicePort protocol dhcp is renewed. Will always return 0 when read.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.6 |
agentServicePortIpv6AdminModeThe service port IPv6 administrative staterw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.7 |
agentServicePortIpv6GatewayThe IPv6 Gateway Address configured on the Servie port.rw Ipv6AddressPrefix .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.8 |
agentServicePortIpv6AddrTableThe list of IPv6 address prefixes
configured on the Service port. SEQUENCE OF AgentServicePortIpv6AddrEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9 |
agentServicePortIpv6AddrEntryAn interface entry containing objects of
a particular IPv6 address prefix AgentServicePortIpv6AddrEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1 |
agentServicePortIpv6AddrPrefixThe IPv6 Address Prefix configured on the
Servie port.rw Ipv6AddressPrefix .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1.1 |
agentServicePortIpv6AddrPrefixLengthThe IPv6 Address Prefix Length of the
address configured on the Service port.rw INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1.2 |
agentServicePortIpv6AddrEuiFlagThe service port IPv6 Eui Flagrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1.3 |
agentServicePortIpv6AddrStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.9.1.4 |
agentServicePortIpv6AddressAutoConfigThe ipv6 address autoconfig allows the device to perform IPv6
stateless address auto-configuration to discover prefixes on the
link and then to add the eui-64 based addresses to the serviceport interface.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.10 |
agentServicePortIpv6ConfigProtocolThe Service Port.s IPv6 protocol configured on the switch.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.11 |
agentServicePortDhcp6ClientDuidThe DHCPv6 Client unique DUID. This value cannot be modifiedro DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.12 |
agentServicePortStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13 |
agentServicePortDhcp6ADVERTISEMessagesReceivedThe no. of DHCPv6 messages of type ADVERTISE that have been received by the DHCPv6 client on the service port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.1 |
agentServicePortDhcp6REPLYMessagesReceivedThe no. of DHCPv6 messages of type REPLY that have been received by the DHCPv6 client on the service port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.2 |
agentServicePortDhcp6ADVERTISEMessagesDiscardedThe no. of DHCPv6 messages of type ADVERTISE that have been discarded by the DHCPv6 client on the service port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.3 |
agentServicePortDhcp6REPLYMessagesDiscardedThe no. of DHCPv6 messages of type REPLY that have been discarded by the DHCPv6 client on the service port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.4 |
agentServicePortDhcp6MalformedMessagesReceivedThe no. of DHCPv6 messages received malformed by the DHCPv6 client on the service port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.5 |
agentServicePortDhcp6SOLICITMessagesSentThe no. of DHCPv6 messages of type SOLICIT that have been sent by the DHCPv6 client on the service port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.6 |
agentServicePortDhcp6REQUESTMessagesSentThe no. of DHCPv6 messages of type REQUEST that have been sent by the DHCPv6 client on the service port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.7 |
agentServicePortDhcp6RENEWMessagesSentThe no. of DHCPv6 messages of type RENEW that have been sent by the DHCPv6
client on the service port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.8 |
agentServicePortDhcp6REBINDMessagesSentThe no. of DHCPv6 messages of type REBIND that have been sent by the DHCPv6 client on the service port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.9 |
agentServicePortDhcp6RELEASEMessagesSentThe no. of DHCPv6 messages of type RELEASE that have been sent by the DHCPv6 client on the service port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.10 |
agentServicePortDhcp6StatsResetClear the DHCPv6 Client statistics on the service port. A value of reset(1)
is used to reset the statistics. A read on this object will
always return the value none(0). The value none(0) cannot
be forcibly set by the administrator.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.4.13.11 |
agentSnmpConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6 |
agentSnmpTrapFlagsConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6.5 |
agentSnmpAuthenticationTrapFlagAuthentication Flag - Enable/Disable authentication Flag.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6.5.1 |
agentSnmpLinkUpDownTrapFlagLink Up/Down Flag - Enable/Disable Link Up/Link Down traps for the
entire switch. When set to Enable, the Link Up/Down traps will be
sent only if the Link Trap flag setting associated with the port
(Port Configuration Menu) is set to Enable.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6.5.2 |
agentSnmpMultipleUsersTrapFlagMultiple Users Flag - Enable/Disable Multiple User traps. When the value
is set to Enable, a Multiple User Trap is sent whenever someone logs in
to the terminal interface (EIA 232 or Telnet) and there is already an
existing terminal interface session.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6.5.3 |
agentSnmpSpanningTreeTrapFlagSpanning Tree Flag - This flag enables the sending of new root traps and
topology change notification traps.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6.5.4 |
agentSnmpBroadcastStormTrapFlagBroadcast Storm Flag - This flag enables or disables the broadcast
storm trap. You must also enable Broadcast Storm Recovery Mode
(see the Switch Configuration Menu). When this
value is set to Enable and Broadcast Storm Recovery mode is set to Enable,
the Broadcast Storm Start/End traps are sent when the switch enters and
leaves Broadcast Storm Recovery.rwobsolete Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.6.5.5 |
agentSpanningTreeConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.7 |
agentSpanningTreeModeThe switch's Spanning Tree Switch Status. This functionality is now
handled by agentStpAdminModerwobsolete Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.7.1 |
agentBpduGuardModeThe spanning tree BPDU Guard Mode.
enable(1) - enables BPDU Guard Mode on the switch.
disable(2) - disables BPDU Guard Mode on the switch.
The default status is disabled.
This functionality is now handled by agentStpBpduGuardModerwobsolete Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.7.2 |
agentBPDUFilteringModeThe spanning tree BPDU Filter Mode, it enables BPDU Filter on all
edge ports.
enable(1) - enables BPDU Filter Mode on the switch.
disable(2) - disables BPDU Filter Mode on the switch.
The default status is disabled.
This functionality is now handled by agentStpBpduFilterDefaultrwobsolete Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.7.3 |
agentSwitchConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8 |
agentSwitchFdbAddressAgingTimeoutThe address aging timeout.
Specifies aging time in seconds (10 - 1000000) before a dynamic MAC address
is erased from the Filtering Database. The default value is 300 seconds.
Use '0' to disable aging time for the MAC address Table.rw Integer32 (0|10..1000000) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.3 |
agentSwitchAddressAgingTimeoutTableThe switch's address aging timeout table SEQUENCE OF AgentSwitchAddressAgingTimeoutEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.4 |
agentSwitchAddressAgingTimeoutEntryAging information about a specific Filtering Database. AgentSwitchAddressAgingTimeoutEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.4.1 |
agentSwitchAddressAgingTimeoutThe FDB entry's address aging timeout (in seconds).value '0' to disable Aging Timeout feature.rw Integer32 (0|10..1000000) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.4.1.1 |
agentSwitchStaticMacFilteringTableThe switch's static Mac filtering table SEQUENCE OF AgentSwitchStaticMacFilteringEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5 |
agentSwitchStaticMacFilteringEntryPer-port ingress/egress filter configuration based on VLAN Id and MAC address. AgentSwitchStaticMacFilteringEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1 |
agentSwitchStaticMacFilteringVlanIdThe Static MAC Filter Vlan Idro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.1 |
agentSwitchStaticMacFilteringAddressThe Static MAC Filter MAC addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.2 |
agentSwitchStaticMacFilteringSourcePortMaskThe Static MAC Filter source port mask.
When setting this value, the system will ignore configuration for ports not
between the first and last valid ports. Configuration of any port numbers
between this range that are not valid ports return a failure message, but will
still apply configuration for valid ports.
To obtain port numbers from interface numbers, use the objects
agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable
table.rw AgentPortMask (DELL-REF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.3 |
agentSwitchStaticMacFilteringDestPortMaskThe Static MAC Filter destination port mask.
When setting this value, the system will ignore configuration for ports not
between the first and last valid ports. Configuration of any port numbers
between this range that are not valid ports return a failure message, but will
still apply configuration for valid ports.
To obtain port numbers from interface numbers, use the objects
agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable
table.
Configuring destination port mask for a unicast MAC filter is not supported on some platforms.rw AgentPortMask (DELL-REF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.4 |
agentSwitchStaticMacFilteringStatusThe Static MAC Filter status.
Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.5.1.5 |
agentSwitchSnoopingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6 |
agentSwitchSnoopingCfgTableA table of the IGMP/MLD Snooping Global configuration entries. SEQUENCE OF AgentSwitchSnoopingCfgEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1 |
agentSwitchSnoopingCfgEntryRepresents entry for Snooping switch Configuration. AgentSwitchSnoopingCfgEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1 |
agentSwitchSnoopingProtocolThe protocol type of network protocol in use.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1.1 |
agentSwitchSnoopingAdminModeThis enables or disables Snooping on the system.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1.2 |
agentSwitchSnoopingPortMaskIGMP/MLD Snooping Port Mask.
This allows configuration of IGMP/MLD Snooping on selected ports.
IGMP Snooping cannot be enabled on an interface that has routing
enabled, or is a member of a LAG. If a port which has IGMP/MLD Snooping
enabled becomes enabled for routing, or is enlisted as a member of a
LAG, IGMP/MLD Snooping functionality will be disabled on that port. IGMP/MLD
Snooping functionality will be subsequently be reenabled if routing is
disabled or LAG membership is removed from an interface that had previously
had IGMP Snooping enabled.
To obtain port numbers from interface numbers, use the objects
agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable
table.rw AgentPortMask (DELL-REF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1.3 |
agentSwitchSnoopingMulticastControlFramesProcessedMulticast Control Frames Processed by CPU.
The number of multicast control frames that have been processed by the CPU.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.6.1.1.4 |
agentSwitchSnoopingVlanGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8 |
agentSwitchSnoopingVlanTableA table of the IGMP/MLD Snooping Vlan configuration entries. SEQUENCE OF AgentSwitchSnoopingVlanEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1 |
agentSwitchSnoopingVlanEntryRepresents entry for a IGMP/MLD Snooping Vlan. AgentSwitchSnoopingVlanEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1 |
agentSwitchSnoopingVlanAdminModeThis enables or disables IGMP/MLD Snooping on a selected Vlan interface.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.1 |
agentSwitchSnoopingVlanGroupMembershipIntervalThe amount of time in seconds that a switch will wait for a report
from a particular group on the selected vlan before deleting the
interface participating in the vlan from the entry. This value must
be greater than agentSwitchIGMPSnoopingIntfMaxResponseTime.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.2 |
agentSwitchSnoopingVlanMaxResponseTimeThe amount of time in seconds a switch will wait after sending
a query on the selected vlan because it did not receive a report for
a particular group in the interface participating in the vlan.
This value must be less than
agentSwitchSnoopingIntfGroupMembershipInterval.
The default value is 10.
For IGMP & MLD Snooping this value ranges from 1 to 25.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.3 |
agentSwitchSnoopingVlanFastLeaveAdminModeThis enables or disables IGMP/MLD Snooping on the selected vlan.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.4 |
agentSwitchSnoopingVlanMRPExpirationTimeThe amount of time in seconds that a switch will wait for a query to be
received on the selected interface participating in the vlan before the
interface is removed from the list of interfaces with multicast routers
attached. This parameter is configurable only for exisiting Vlans.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.5 |
agentSwitchSnoopingVlanReportSuppModeThis enables or disables IGMP/MLD Snooping Report Suppression feature on the selected vlan.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.8.1.1.6 |
agentSwitchVlanStaticMrouterGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.9 |
agentSwitchVlanStaticMrouterTableA table of the IGMP/MLD Static Mrouter Configuration parameters. SEQUENCE OF AgentSwitchVlanStaticMrouterEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.9.1 |
agentSwitchVlanStaticMrouterEntryRepresents entry for a IGMP/MLD Static Mrouter. AgentSwitchVlanStaticMrouterEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.9.1.1 |
agentSwitchVlanStaticMrouterAdminModeThis enables or disables IGMP/MLD Mrouter on a per-interface per-vlan basis.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.9.1.1.1 |
agentSwitchMFDBGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10 |
agentSwitchMFDBTableThe Multicast Forwarding Database table SEQUENCE OF AgentSwitchMFDBEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1 |
agentSwitchMFDBEntryContains Forwarding and Filtering information per Vlan Index, MAC Address, and
Component User. AgentSwitchMFDBEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1 |
agentSwitchMFDBVlanIdVlan Index for which this entry is associated with.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.1 |
agentSwitchMFDBMacAddressA multicast MAC address for which the switch has forwarding and or
filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.2 |
agentSwitchMFDBProtocolTypeThe component that is responsible for this entry in the Multicast
Forwarding Database.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.3 |
agentSwitchMFDBTypeThis displays the type of the entry.
static(1) - Entries configured by the end user
dynamic(2) - Entries added as a result of a learning process or protocolro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.4 |
agentSwitchMFDBDescriptionText description of this multicast table entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.5 |
agentSwitchMFDBForwardingPortMaskBitMask indicating which ports this entry indicates should be forwarded.
To obtain port numbers from interface numbers, use the objects
agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable
table.ro AgentPortMask (DELL-REF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.6 |
agentSwitchMFDBFilteringPortMaskBitMask indicating which ports this entry indicates should be filtered.
To obtain port numbers from interface numbers, use the objects
agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable
table.ro AgentPortMask (DELL-REF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.1.1.7 |
agentSwitchMFDBSummaryTableThe Multicast Forwarding Database Summary table SEQUENCE OF AgentSwitchMFDBSummaryEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.2 |
agentSwitchMFDBSummaryEntrySummarizes the forwarding ports for all components registered for all
MFDB table entries with the same Vlan Index and MAC Address. AgentSwitchMFDBSummaryEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.2.1 |
agentSwitchMFDBSummaryVlanIdVlan Index for which this entry is associated with.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.2.1.1 |
agentSwitchMFDBSummaryMacAddressA multicast MAC address for which the switch has forwarding and or
filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.2.1.2 |
agentSwitchMFDBSummaryForwardingPortMaskPort Mask indicating which ports this entry indicates should be forwarded.
To obtain port numbers from interface numbers, use the objects
agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable
table.ro AgentPortMask (DELL-REF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.2.1.3 |
agentSwitchMFDBMaxTableEntriesThis displays the maximum number of entries that can possibly be in
the Multicast Forwarding Database table.ro Gauge32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.3 |
agentSwitchMFDBMostEntriesUsedThis displays the largest number of entries that have been present
in the Multicast Forwarding Database table. This value is also known
as the MFDB high-water mark.ro Gauge32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.4 |
agentSwitchMFDBCurrentEntriesThis displays the current number of entries in the Multicast
Forwarding Database table.ro Gauge32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.10.5 |
agentSwitchDVlanTagGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11 |
agentSwitchDVlanTagEthertypeConfigures the Double Vlan Tag Ethertype for the switch.
If this object is supported, ethertype cannot be
configured per port.
Commonly used are the Ethertypes for vman tags (34984, or 0x88A8)
and dot1q tags (33024, or 0x8100).rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.1 |
agentSwitchDVlanTagTableA table of entries specifying the ethertype (TPID) values.
This will let the user specify multiple ethertypes globally. SEQUENCE OF AgentSwitchDVlanTagEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.2 |
agentSwitchDVlanTagEntryA table entry specifying the ethertype (TPID) values.
Commonly used are the Ethertypes for vman tags (34984, or 0x88A8)
and dot1q tags (33024, or 0x8100). AgentSwitchDVlanTagEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.2.1 |
agentSwitchDVlanTagTPidEthertype value to identify incoming double tagged frames Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.2.1.1 |
agentSwitchDVlanTagPrimaryTPidSpecifies if this TPID is primary TPID for the switch or notrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.2.1.2 |
agentSwitchDVlanTagRowStatusRow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.2.1.3 |
agentSwitchPortDVlanTagTableA table entries specifying the ethertype (TPID) values per port. SEQUENCE OF AgentSwitchPortDVlanTagEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3 |
agentSwitchPortDVlanTagEntryA table entry specifying the ethertype (TPID) value for a port. AgentSwitchPortDVlanTagEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1 |
agentSwitchPortDVlanTagInterfaceIfIndexPort Id on to which the Ethertype value is mapped Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.1 |
agentSwitchPortDVlanTagTPidEthertype value to identify incoming double tagged frames Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.2 |
agentSwitchPortDVlanTagModeControls the Double Vlan Tag mode on this port.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.3 |
agentSwitchPortDVlanTagCustomerIdConfigures the Customer ID for the Double Vlan Tag for this port.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.4 |
agentSwitchPortDVlanTagRowStatusRow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.11.3.1.5 |
agentSwitchStormControlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12 |
agentSwitchDot3FlowControlModeConfig switchconfig flowcontrol allows you to enable or disable
802.3x flow control for the switch. This value applies to only
full-duplex mode ports. Enabling asymmetric flow control allows
the switch to receive pause frames but it will not transmit
pause frames.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.1 |
agentSwitchBroadcastControlModeThe switch config broadcast allows you to enable or disable
broadcast storm recovery mode. When you specify Enable for Broadcast
Storm Recovery and the broadcast traffic on any Ethernet port exceeds
the configured threshold, the switch blocks (discards) the broadcast
traffic.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.4 |
agentSwitchBroadcastControlThresholdConfigures the broadcast storm recovery threshold for this port
as a percentage of port speed.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.5 |
agentSwitchMulticastControlModeThe switch config multicast allows you to enable or disable
multicast storm recovery mode. When you specify Enable for multicast
Storm Recovery and the multicast traffic on any Ethernet port exceeds
the configured threshold, the switch blocks (discards) the multicast
traffic.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.6 |
agentSwitchMulticastControlThresholdConfigures the multicast storm recovery threshold for this port
as a percentage of port speed.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.7 |
agentSwitchUnicastControlModeThe switch config unicast allows you to enable or disable
unicast storm recovery mode. When you specify Enable for unicast
Storm Recovery and the unknown unicast traffic on any Ethernet port exceeds
the configured threshold, the switch blocks (discards) the unknown unicast
traffic.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.8 |
agentSwitchUnicastControlThresholdConfigures the unicast storm recovery threshold for this port
as a percentage of port speed.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.9 |
agentSwitchBroadcastControlThresholdUnitConfigures the units of the threshold value to percentage of
port speed or absolute packets per second.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.10 |
agentSwitchMulticastControlThresholdUnitConfigures the units of the threshold value to percentage of
port speed or absolute packets per second.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.11 |
agentSwitchUnicastControlThresholdUnitConfigures the units of the threshold value to percentage of
port speed or absolute packets per second.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.12 |
agentSwitchStormControlTypeType of storm control.
broadcast(1) - Broadcast storm control traffic.
multicast(2) - Multicast storm control traffic.
broadcast(3) - Unicast traffic resulted in destination lookup failure.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.13 |
agentSwitchStormControlActionAction to be taken when storm control rate limit is reached.
shutdown(1) - Diag disable the interface on storm control.
trap(2) - Generate trap on storm control.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.12.14 |
agentSwitchVlanMacAssociationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17 |
agentSwitchVlanMacAssociationTableThe switch's MAC To VLAN association table SEQUENCE OF AgentSwitchVlanMacAssociationEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17.1 |
agentSwitchVlanMacAssociationEntryVLAN to be assigned to untagged or priority tagged
packets based on MAC address. AgentSwitchVlanMacAssociationEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17.1.1 |
agentSwitchVlanMacAssociationMacAddressThe Mac address MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17.1.1.1 |
agentSwitchVlanMacAssociationVlanIdThe VLAN the Mac address assigned to VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17.1.1.2 |
agentSwitchVlanMacAssociationRowStatusThe Mac to VLAN association row status.
Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.17.1.1.3 |
agentSwitchProtectedPortConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18 |
agentSwitchProtectedPortTableThe switch's protected port mapping table SEQUENCE OF AgentSwitchProtectedPortEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18.1 |
agentSwitchProtectedPortEntryProtected ports assigned to groups. AgentSwitchProtectedPortEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18.1.1 |
agentSwitchProtectedPortGroupIdThe group that this port belongs to Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18.1.1.1 |
agentSwitchProtectedPortGroupNameThe name of the grouprw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18.1.1.2 |
agentSwitchProtectedPortPortListThe set of ports that are protected in this grouprw ProtectedPortList .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.18.1.1.3 |
agentSwitchVlanSubnetAssociationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19 |
agentSwitchVlanSubnetAssociationTableThe switch's Subnet To VLAN association table SEQUENCE OF AgentSwitchVlanSubnetAssociationEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1 |
agentSwitchVlanSubnetAssociationEntryVLAN to be assigned to untagged or priority tagged
packets based on IP address and Subnet Mask. AgentSwitchVlanSubnetAssociationEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1 |
agentSwitchVlanSubnetAssociationIPAddressThe ip address IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1.1 |
agentSwitchVlanSubnetAssociationSubnetMaskThe subnet mask IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1.2 |
agentSwitchVlanSubnetAssociationVlanIdThe VLAN that the IP address and subnet mask assigned to VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1.3 |
agentSwitchVlanSubnetAssociationRowStatusThe Subnet to VLAN association row status.
Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.19.1.1.4 |
agentSwitchSnoopingQuerierGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20 |
agentSwitchSnoopingQuerierCfgTableA table of the IGMP/MLD Snooping Querier Global configuration entries. SEQUENCE OF AgentSwitchSnoopingQuerierCfgEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1 |
agentSwitchSnoopingQuerierCfgEntryRepresents entry for Snooping Querier Configuration. AgentSwitchSnoopingQuerierCfgEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1 |
agentSwitchSnoopingQuerierAdminModeThis enables or disables Snooping Querier on the system.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.1 |
agentSwitchSnoopingQuerierVersionThis specifies the multicast protocol versions that are
supported by the system.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.2 |
agentSwitchSnoopingQuerierAddressThis specifies the default source ip address to be used
while generating general queries.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.3 |
agentSwitchSnoopingQuerierQueryIntervalThis specified the timer interval after which the system
generates general queries.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.4 |
agentSwitchSnoopingQuerierExpiryIntervalThis specified the timer interval after which the detected
other querier information is no longer valid.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.1.1.5 |
agentSwitchSnoopingQuerierVlanTableA table of the Snooping Querier Vlan configuration entries. SEQUENCE OF AgentSwitchSnoopingQuerierVlanEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2 |
agentSwitchSnoopingQuerierVlanEntryRepresents entry for a Snooping Querier configurable Vlan. AgentSwitchSnoopingQuerierVlanEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1 |
agentSwitchSnoopingQuerierVlanAdminModeThis enables or disables Snooping Querier on a selected Vlan interface.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.1 |
agentSwitchSnoopingQuerierVlanOperModeThis specifies the current state of the Snooping Querier on a selected vlan interfacero Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.2 |
agentSwitchSnoopingQuerierElectionParticipateModeThis enables or disables the Snooping Querier Election Participation mode. When enabled
snooping querier switch will participate in querier election up on discovering another
querier in the specified vlan. When disabled, up on discovering another querier, snooping
querier moves to non-querier state.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.3 |
agentSwitchSnoopingQuerierVlanAddressThis specifies the default source ip address to be used while generating general queries on
the specified vlan.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.4 |
agentSwitchSnoopingQuerierOperVersionThis specifies the multicast protocol version that is currently being used by the snooping
switch for the specified vlan while generating query messages.ro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.5 |
agentSwitchSnoopingQuerierOperMaxResponseTimeThe amount of time in seconds a switch will wait after sending
a query on the selected vlan because it did not receive a report for
a particular group in the interface participating in the vlan. This
object is valid only when agentSwitchSnoopingQuerierOperVersion object
is valid.
(-1) - indicates that parameter is not available;
( 0) - indicates that response time is less then 1 second.ro Integer32(-1|0..2147483647) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.6 |
agentSwitchSnoopingQuerierLastQuerierAddressThis specifies the last querier's ip address for the specified vlan.
It represents the detected other multicast querier in the vlan.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.7 |
agentSwitchSnoopingQuerierLastQuerierVersionThis specifies the multicast protocol version that is currently being used
by the detected other multicast querier for the specified vlan.
(-1) - indicates that parameter is not available.ro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.20.2.1.8 |
agentSwitchVoiceVLANGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21 |
agentSwitchVoiceVLANAdminModeThis enables or disables Voice VLAN on the system.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21.1 |
agentSwitchVoiceVlanDeviceTableA table of the Voice Vlan device entries. SEQUENCE OF AgentSwitchVoiceVlanDeviceEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21.2 |
agentSwitchVoiceVlanDeviceEntryRepresents entry for a Voice Device on the interface. AgentSwitchVoiceVlanDeviceEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21.2.1 |
agentSwitchVoiceVlanInterfaceNumThe interface number of this interface.ro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21.2.1.1 |
agentSwitchVoiceVlanDeviceMacAddressThe Voice Device Mac addressro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.21.2.1.2 |
agentDaiConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22 |
agentDaiSrcMacValidateThis object indicates whether Sender MAC validation in the ARP
packets is enabled.
If this object is set to 'true', validation
is enabled.
If this object is set to 'false', validation
is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.1 |
agentDaiDstMacValidateThis object indicates whether Target MAC validation in the ARP
Response packets is enabled.
If this object is set to 'true', validation
is enabled.
If this object is set to 'false', validation
is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.2 |
agentDaiIPValidateThis object indicates whether IP address validation in the ARP
packets is enabled.
If this object is set to 'true', validation
is enabled.
If this object is set to 'false', validation
is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.3 |
agentDaiVlanConfigTableA table provides the mechanism to control Dynamic ARP
Inspection per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added. SEQUENCE OF AgentDaiVlanConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4 |
agentDaiVlanConfigEntryA row instance contains the configuration for Dynamic
ARP Inspection at each existing VLAN. AgentDaiVlanConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1 |
agentDaiVlanIndexThis object indicates the VLAN number on which Dynamic ARP
Inspection feature is configured. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.1 |
agentDaiVlanDynArpInspEnableThis object indicates whether Dynamic ARP Inspection is
enabled in this VLAN.
If this object is set to 'true', Dynamic ARP Inspection
is enabled.
If this object is set to 'false', Dynamic ARP Inspection
is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.2 |
agentDaiVlanLoggingEnableThis object indicates whether the Dynamic ARP Inspection
logging is enabled on this VlAN.
If this object is set to 'true', Dynamic ARP Inspection
logging is enabled.
If this object is set to 'false', Dynamic ARP Inspection
loging is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.3 |
agentDaiVlanArpAclNameThis object indicates the ARP ACL name set for this VLAN.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.4 |
agentDaiVlanArpAclStaticFlagThis object indicates whether the ARP ACL set for this
VLAN has static flag set.
If this object is set to 'true', static flag is enabled.
If this object is set to 'false', static flag is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.4.1.5 |
agentDaiStatsResetClear the DAI statistics on all vlans. A value of reset(1)
is used to reset the statistics. A read on this object will
always return the value none(0). The value none(0) cannot
be forcibly set by the administrator.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.5 |
agentDaiVlanStatsTableA table containing Dynamic ARP Inspection statistics per VLAN.
When a VLAN is created in a device supporting this table,
and Dynamic ARP Inspection is enabled on that VLAN
a corresponding entry of this table will be added. SEQUENCE OF AgentDaiVlanStatsEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6 |
agentDaiVlanStatsEntryA row instance contains the Dynamic ARP Inspection
statistics per VLAN. AgentDaiVlanStatsEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1 |
agentDaiVlanStatsIndexThis object indicates the VLAN number on which Dynamic ARP
Inspection statistics are retrieved. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.1 |
agentDaiVlanPktsForwardedNumber of valid ARP packets forwarded by DAI.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.2 |
agentDaiVlanPktsDroppedNumber of invalid ARP packets dropped by DAI.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.3 |
agentDaiVlanDhcpDropsNumber of ARP packets that were dropped by DAI as
there is no matching DHCP Snooping binding entry found.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.4 |
agentDaiVlanDhcpPermitsNumber of ARP packets that were forwarded by DAI as
there is a matching DHCP Snooping binding entry found.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.5 |
agentDaiVlanAclDropsNumber of ARP packets that were dropped by DAI as
there is no matching ARP ACL rule found for this Vlan and
the static flag is set on this vlan.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.6 |
agentDaiVlanAclPermitsNumber of ARP packets that were permitted by DAI as
there is a matching ARP ACL rule found for this Vlan.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.7 |
agentDaiVlanSrcMacFailuresNumber of ARP packets that were dropped by DAI as the
sender mac address in ARP packet didn't match the source
mac in ethernet header.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.8 |
agentDaiVlanDstMacFailuresNumber of ARP packets that were dropped by DAI as the
target mac address in ARP reply packet didn't match the
destination mac in ethernet header.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.9 |
agentDaiVlanIpValidFailuresNumber of ARP packets that were dropped by DAI as the
sender IP address in ARP packet or target IP address in
ARP reply packet is invalid. Invalid addresses include
0.0.0.0, 255.255.255.255, IP multicast addresses,
class E addresses (240.0.0.0/4), loopback addresses (127.0.0.0/8).ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.6.1.10 |
agentDaiIfConfigTableA table provides the mechanism to configure the trust
state for Dynamic ARP Inspection purpose at each physical
interface capable of this feature. SEQUENCE OF AgentDaiIfConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.7 |
agentDaiIfConfigEntryA row instance contains the configuration for
Dynamic ARP Inspection at each physical
interface capable of this feature. AgentDaiIfConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.7.1 |
agentDaiIfTrustEnableThis object indicates whether the interface is trusted for
Dynamic ARP Inspection purpose.
If this object is set to 'true', the interface is trusted.
ARP packets coming to this interface will be forwarded
without checking.
If this object is set to 'false', the interface is not
trusted. ARP packets coming to this interface will be
subjected to ARP inspection.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.7.1.1 |
agentDaiIfRateLimitThis object indicates rate limit value for Dynamic ARP
Inspection purpose. If the incoming rate of ARP packets
exceeds the value of this object for consecutively
burst interval seconds, ARP packets will be
dropped. Value of -1 indicates that there is no rate limit.rw Integer32 (-1|0..300) UNITS "packets per second" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.7.1.2 |
agentDaiIfBurstIntervalThis object indicates the burst interval value
for rate limiting purpose on this interface.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.22.7.1.3 |
agentArpAclGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23 |
agentArpAclTableA table of the ARP ACL entries SEQUENCE OF AgentArpAclEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.1 |
agentArpAclEntryRepresents entry for an ARP ACL AgentArpAclEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.1.1 |
agentArpAclNameName of the ARP ACL, which must consist of 1 to 31 alphanumeric
characters and uniquely identify this ARP ACL. This object must
be set to complete a new ARP ACL row instance.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.1.1.1 |
agentArpAclRowStatusThe status of this conceptual row. Entries can not be deleted until all rows in
arpAclRuleTable with corresponding values of arpAclIndex have been deleted.
active(1) - this ACL instance is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.1.1.2 |
agentArpAclRuleTableA table of the ARP ACL Rule entries SEQUENCE OF AgentArpAclRuleEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.2 |
agentArpAclRuleEntryRepresents entry for a set of ARP ACL-match rules AgentArpAclRuleEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.2.1 |
agentArpAclRuleMatchSenderIpAddrSender IP address match value for the ARP ACL.rw IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.2.1.1 |
agentArpAclRuleMatchSenderMacAddrSender MAC address match value for the ARP ACL.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.2.1.2 |
agentArpAclRuleRowStatusThe status of this conceptual row.
active(1) - this ACL Rule is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.23.2.1.3 |
agentDhcpSnoopingConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24 |
agentDhcpSnoopingAdminModeThis object indicates whether DHCP Snooping
is enabled globally.
If this object is set to 'true',admin mode
is enabled globally.
If this object is set to 'false',admin mode
is disabled globally.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.1 |
agentDhcpSnoopingVerifyMacThis object indicates whether source Mac address
in the received DHCP Message needs to be verified or not.
If this object is set to 'true',verifyMac
is enabled globally.
If this object is set to 'false',verifyMac
is disabled globally.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.2 |
agentDhcpSnoopingVlanConfigTableA table provides the mechanism to control DHCP SNOOPING
per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added. SEQUENCE OF AgentDhcpSnoopingVlanConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.3 |
agentDhcpSnoopingVlanConfigEntryA row instance contains the configuration for DHCP
SNOOPING at each existing VLAN. AgentDhcpSnoopingVlanConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.3.1 |
agentDhcpSnoopingVlanIndexThis object indicates the VLAN number on which DHCP SNOOPING
Inspection feature is configured. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.3.1.1 |
agentDhcpSnoopingVlanEnableThis object indicates whether DHCP SNOOPING is
enabled in this VLAN.
If this object is set to 'true', DHCP SNOOPING
is enabled.
If this object is set to 'false', DHCP SNOOPING
is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.3.1.2 |
agentDhcpSnoopingIfConfigTableA table provides the mechanism to configure the trust
state for DHCP snooping purpose at each physical
interface capable of this feature. SEQUENCE OF AgentDhcpSnoopingIfConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4 |
agentDhcpSnoopingIfConfigEntryA row instance contains the configuration for
DHCP snooping at each physical interface capable of this feature. AgentDhcpSnoopingIfConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1 |
agentDhcpSnoopingIfTrustEnableThis object indicates whether the interface is trusted for
DHCP snooping purpose.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1.1 |
agentDhcpSnoopingIfLogEnableThis object indicates whether the Logging needs on DHCP snooping validations
or notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1.2 |
agentDhcpSnoopingIfRateLimitThis object indicates rate limit value for DHCP
Snooping purpose. If the incoming rate of DHCP packets
exceeds the value of this object for consecutively
burst interval seconds, DHCP packets will be
dropped. Value of -1 indicates that there is no rate limit.rw Integer32 (-1|0..300) UNITS "packets per second" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1.3 |
agentDhcpSnoopingIfBurstIntervalThis object indicates the burst interval value
for rate limiting purpose on this interface. Value
of -1 indicates that there is no burst interval.rw Integer32 (-1|1..15) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.4.1.4 |
agentIpsgIfConfigTableA table provides the mechanism to configure the IPSG
at each physical interface capable of this feature. SEQUENCE OF AgentIpsgIfConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.5 |
agentIpsgIfConfigEntryA row instance contains the configuration for
IPSG at each physical interface capable of this feature. AgentIpsgIfConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.5.1 |
agentIpsgIfVerifySourceThis object indicates whether IP packets received on this interface
are filtered based on whether IP Source Guard considers the source IP address
to be a valid client address. Setting this variable to false automatically
sets agentIpsgIfPortSecurity to false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.5.1.1 |
agentIpsgIfPortSecurityThis object indicates whether IP packets received on this interface
are filtered based on whether IP Source Guard considers the source MAC address
to be a valid client address. The port security option cannot be enabled
unless agentIpsgIfVerifySource is also enabled. That is, MAC address filtering
cannot be done without also doing IP address filtering. But IP address filtering
can be done without MAC address filtering. Once the port security
option is enabled, it can only be disabled by disabling agentIpsgIfVerifySource.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.5.1.2 |
agentDhcpSnoopingStatsResetClear the DHCP snooping statistics on all ports. A value of reset(1)
is used to reset the statistics. A read on this object will
always return the value none(0). The value none(0) cannot
be forcibly set by the administrator.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.6 |
agentDhcpSnoopingStatsTableA table provides the mechanism for statics of DHCP snooping. SEQUENCE OF AgentDhcpSnoopingStatsEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.7 |
agentDhcpSnoopingStatsEntryA row instance contains the DHCP snooping statistics per VLAN. AgentDhcpSnoopingStatsEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.7.1 |
agentDhcpSnoopingMacVerifyFailuresThis object indicates the number of failure verifications of client mac address with
source mac addressro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.7.1.1 |
agentDhcpSnoopingInvalidClientMessagesThis object indicates the number of invalid DHCP releases and denay messagesro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.7.1.2 |
agentDhcpSnoopingInvalidServerMessagesThis object indicates the number of invalid DHCP server mesaagesro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.7.1.3 |
agentStaticIpsgBindingTableA table of the IPSG static entries SEQUENCE OF AgentStaticIpsgBindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8 |
agentStaticIpsgBindingEntryRepresents a binding in IPSG table AgentStaticIpsgBindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1 |
agentStaticIpsgBindingIfIndexInterface on which this IPSG binding is going to be added.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.1 |
agentStaticIpsgBindingVlanIdVLAN to whcig this IPSG binding is going to be added.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.2 |
agentStaticIpsgBindingIpAddrIP address match value for the IPSG Binding.rw IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.3 |
agentStaticIpsgBindingMacAddrMAC address match value for the IPSG Binding.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.4 |
agentStaticIpsgBindingRowStatusThe status of this conceptual row.
active(1) - this IPSG Binding is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.8.1.5 |
agentDynamicIpsgBindingTableA table of the IPSG dynamic entries SEQUENCE OF AgentDynamicIpsgBindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9 |
agentDynamicIpsgBindingEntryRepresents a binding in IPSG table AgentDynamicIpsgBindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1 |
agentDynamicIpsgBindingIfIndexInterface on which this IPSG binding is added.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1.1 |
agentDynamicIpsgBindingVlanIdVLAN to whcig this IPSG binding is going to be added.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1.2 |
agentDynamicIpsgBindingIpAddrSender IP address match value for the IPSG Binding.ro IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1.3 |
agentDynamicIpsgBindingMacAddrMAC address match value for the IPSG Binding.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.9.1.4 |
agentStaticDsBindingTableA table of the DHCP SNOOPING static entries SEQUENCE OF AgentStaticDsBindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10 |
agentStaticDsBindingEntryRepresents a binding in DHCP SNOOPING table AgentStaticDsBindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1 |
agentStaticDsBindingIfIndexInterface on which this DHCP SNOOPING binding is going to be added.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.1 |
agentStaticDsBindingVlanIdVLAN to which this DHCP SNOOPING binding is going to be added.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.2 |
agentStaticDsBindingMacAddrMAC address match value for the DHCP SNOOPING Binding.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.3 |
agentStaticDsBindingIpAddrIP address match value for the DHCP SNOOPING Binding.rw IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.4 |
agentStaticDsBindingRowStatusThe status of this conceptual row.
active(1) - this DHCP SNOOPING Binding is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.10.1.5 |
agentDynamicDsBindingTableA table of the DHCP SNOOPING Dynamic entries SEQUENCE OF AgentDynamicDsBindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11 |
agentDynamicDsBindingEntryRepresents a binding in DHCP SNOOPING table AgentDynamicDsBindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1 |
agentDynamicDsBindingIfIndexInterface on which this DHCP SNOOPING binding is going to be added.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.1 |
agentDynamicDsBindingVlanIdVLAN to whcig this DHCP SNOOPING binding is going to be added.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.2 |
agentDynamicDsBindingMacAddrMAC address match value for the DHCP SNOOPING Binding.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.3 |
agentDynamicDsBindingIpAddrIP address match value for the DHCP SNOOPING Binding.ro IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.4 |
agentDynamicDsBindingLeaseRemainingTimeThis specifies the period for which the DHCP SNOOPING Binding is valid.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.11.1.5 |
agentDhcpSnoopingRemoteFileNameThis object indicates the file name on the remote machine
to save the DHCP Snooping bindings. This will be set only
when we have a valid remote IP.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.12 |
agentDhcpSnoopingRemoteIpAddrThis object indicates the IP address of the remote machine
to save the DHCP Snooping bindings. This will be set only
when we have a valid file name.rw IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.13 |
agentDhcpSnoopingStoreIntervalThis object indicates the perodic time interval
to save the DHCP Snooping bindings.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.24.14 |
agentSwitchAddressConflictGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26 |
agentSwitchAddressConflictDetectionStatusDisplays if an address conflict was detected on the switch
since the last reset of the status. Set to 'true'
if detected, 'false' otherwise.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.1 |
agentSwitchAddressConflictDetectionStatusResetClear the last address conflict detection status in the switch.
A value of reset(1) is used to reset the status. A read on this
object always returns the value none (0). The value none (0) cannot
be forcibly set by the administrator.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.2 |
agentSwitchLastConflictingIPAddrThe reported conflicting IP address on the switch since the last
reset of the conflict detection status.ro IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.3 |
agentSwitchLastConflictingMacAddrThe MAC address of the host corresponding to the reported
conflicting IP address on the switch since the last reset of
the conflict detection status.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.4 |
agentSwitchLastConflictReportedTimeTime since the last address conflict was detected. It is displayed
in days, hours, minutes and seconds. It is set to a valid value only
when the conflict detection status is 'true'.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.5 |
agentSwitchConflictIPAddrThe IP address on the switch reported to have a conflict with
another host's IP address.ro IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.6 |
agentSwitchConflictMacAddrThe MAC address of the host that has an IP address conflicting
with the IP address on the switch.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.7 |
agentSwitchAddressConflictDetectionRunTrigger the action to run the active address conflict detection.
A value of run(1) is used to issue the action command. A read on
this object always returns the value none(0). The value none (0)
cannot be forcibly set by the administrator.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.26.8 |
agentSdmPreferConfigEntry OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.27 |
agentSdmPreferCurrentTemplateDisplays the current active SDM Template.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.27.1 |
agentSdmPreferNextTemplateConfigures the next active template. It will be active only after the next reboot.
To revert to the default template after the next reboot, use the option default(0).rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.27.2 |
agentSdmTemplateSummaryTable OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28 |
agentSdmTemplateTableDisplays Switch Database Management Template Information. SEQUENCE OF AgentSdmTemplateEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1 |
agentSdmTemplateEntryInformation about a SDM Template table entry. AgentSdmTemplateEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1 |
agentSdmTemplateIdThe SDM Template type this instance is associated with. Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.1 |
agentArpEntriesThe maximum number of entries in the IPv4 Address Resolution Protocol (ARP) cache for routing interfaces.ro INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.2 |
agentIPv4UnicastRoutesThe maximum number of IPv4 unicast forwarding table entries.ro INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.3 |
agentIPv6NdpEntriesThe maximum number of IPv6 Neighbor Discovery Protocol (NDP) cache entries.ro INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.4 |
agentIPv6UnicastRoutesThe maximum number of IPv6 unicast forwarding table entries.ro INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.5 |
agentEcmpNextHopsThe maximum number of Equal cost next hops that can be installed in the IPv4 and IPv6 unicast forwarding tables.ro INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.6 |
agentIPv4MulticastRoutesThe maximum number of IPv4 multicast forwarding table entries.ro INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.7 |
agentIPv6MulticastRoutesThe maximum number of IPv6 multicast forwarding table entries.ro INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.28.1.1.8 |
agentSwitchCutThroughGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.29 |
agentSwitchCutThroughConfigModeMode changes are effective from the next reload of the Switch.
The cut-through feature may not be present on all switches. Use
- agentSwitchCutThroughRunningModeStatus - MIB to check if the feature is
present on your switch.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.29.1 |
agentSwitchCutThroughRunningModeStatusThis gives the current running mode of the cut-through feature on switch.
Note that Mode changes are effective from the next reload of the Switch.
so running mode may be different than the configured mode.
A value of not-supported(3) means that the feature is not present on the
switch.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.29.2 |
agentSwitchCutThroughConfiguredModeStatusThis gives the configured mode of cut-through feature on switch.
Note that Mode changes are effective from the next reload of the Switch.
so running mode may be different than the configured mode.
A value of not-supported(3) means that the feature is not present on the
switch.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.29.3 |
agentPortTypeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.30 |
agentPortType40GigBaseXX PCS/PMA, unknown PMD. MAU MIB augmentation OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.30.1 |
agentPrivateVlanGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31 |
agentPrivateVlanTable SEQUENCE OF AgentPrivateVlanEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.1 |
agentPrivateVlanEntry AgentPrivateVlanEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.1.1 |
agentPrivateVlanTypeEnables vlan for Private Vlan and configures private vlan type.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.1.1.1 |
agentPrivateVlanAssociateThis field lists all the VlanIDs which are associated with the selected vlan.
If the selected vlan type is not primary(1), a zero-length bitmask is returned.rw VlanList .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.1.1.2 |
agentPrivateVlanIntfAssocTable SEQUENCE OF AgentPrivateVlanIntfAssocEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2 |
agentPrivateVlanIntfAssocEntry AgentPrivateVlanIntfAssocEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1 |
agentPrivateVlanIntfAssocHostPrimaryConfigures the primary host vlan association with the interface.
This must be configured along with agentPrivateVlanIntfAssocHostSecondary before
the association will be operational.
NOTE: Both agentPrivateVlanIntfAssocHostPrimary and agentPrivateVlanIntfAssocHostSecondary
objects must be specified at the same time.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.1 |
agentPrivateVlanIntfAssocHostSecondaryConfigures the secondary host vlan association with the interface.
This must be configured along with agentPrivateVlanIntfAssocHostPrimary before
the association will be operational.
NOTE: Both agentPrivateVlanIntfAssocHostPrimary and agentPrivateVlanIntfAssocHostSecondary
objects must be specified at the same time.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.2 |
agentPrivateVlanIntfAssocPromiscuousPrimaryConfigures the primary promiscuous vlan association with the interface.
This must be configured along with agentPrivateVlanIntfAssocPromiscuousSecondary before
the association will be operational.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.3 |
agentPrivateVlanIntfAssocPromiscuousSecondaryConfigures the secondary promiscuous vlan association with the interface.
This must be configured along with agentPrivateVlanIntfAssocPromiscuousPrimary before
the association will be operational.rw VlanList .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.4 |
agentPrivateVlanIntfAssocOperationalShows the operational private vlans associated with the interface.ro VlanList .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.31.2.1.5 |
agentDhcpL2RelayConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32 |
agentDhcpL2RelayAdminModeThis object indicates whether DHCP L2 Relay
is enabled globally.
If this object is set to 'true',admin mode
is enabled globally.
If this object is set to 'false',admin mode
is disabled globally.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.1 |
agentDhcpL2RelayIfConfigTableA table provides the mechanism to enable/disable and configure
the trust state for DHCP L2Relay purpose at each physical
interface capable of this feature. SEQUENCE OF AgentDhcpL2RelayIfConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.2 |
agentDhcpL2RelayIfConfigEntryA row instance contains the configuration for
DHCP L2 Relay at each physical interface capable of this feature. AgentDhcpL2RelayIfConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.2.1 |
agentDhcpL2RelayIfEnableThis object indicates whether the DHCP L2Relay is enabled
or notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.2.1.1 |
agentDhcpL2RelayIfTrustEnableThis object indicates whether the interface is trusted for
DHCP L2 Relay purpose.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.2.1.2 |
agentDhcpL2RelayVlanConfigTableA table provides the mechanism to control DHCP L2 Relay
per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added. SEQUENCE OF AgentDhcpL2RelayVlanConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.3 |
agentDhcpL2RelayVlanConfigEntryA row instance contains the configuration for DHCP
L2 Relay at each existing VLAN. AgentDhcpL2RelayVlanConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.3.1 |
agentDhcpL2RelayVlanIndexThis object indicates the VLAN number on which DHCP L2 Relay
feature is configured. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.3.1.1 |
agentDhcpL2RelayVlanEnableThis object indicates whether DHCP L2 Relay is
enabled in this VLAN.
If this object is set to 'true', DHCP L2 Relay
is enabled.
If this object is set to 'false', DHCP L2 Relay
is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.3.1.2 |
agentDhcpL2RelayCircuitIdVlanEnableThis object indicates whether DHCP CircuitId is
enabled for L2 relaying in this VLAN.
If this object is set to 'true', DHCP CircuitId
is enabled.
If this object is set to 'false', DHCP CircuitId
is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.3.1.3 |
agentDhcpL2RelayRemoteIdVlanEnableWhen this object is set with a non-empty string, DHCP RemoteId is
enabled for L2 relaying in this VLAN.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.3.1.4 |
agentDhcpL2RelayStatsResetClear the DHCP L2Relay statistics on all ports. A value of reset(1)
is used to reset the statistics. A read on this object will
always return the value none(0). The value none(0) cannot
be forcibly set by the administrator.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.6 |
agentDhcpL2RelayStatsTableA table provides the mechanism for statics of DHCP L2 Relay. SEQUENCE OF AgentDhcpL2RelayStatsEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.7 |
agentDhcpL2RelayStatsEntryA row instance contains the DHCP L2Relay statistics per interface. AgentDhcpL2RelayStatsEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.7.1 |
agentDhcpL2RelayUntrustedSrvrMsgsWithOptn82This object indicates the number of DHCP server messages received with Option-82 field
on the untrusted interface.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.7.1.1 |
agentDhcpL2RelayUntrustedClntMsgsWithOptn82This object indicates the number of DHCP client messages received with Option-82 field
on the untrusted interface.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.7.1.2 |
agentDhcpL2RelayTrustedSrvrMsgsWithoutOptn82This object indicates the number of DHCP server messages received without Option-82 field
on the trusted interface.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.7.1.3 |
agentDhcpL2RelayTrustedClntMsgsWithoutOptn82This object indicates the number of DHCP client messages received without Option-82 field
on the trusted interface.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.32.7.1.4 |
agentDhcpv6SnoopingConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33 |
agentDhcpv6SnoopingAdminModeThis object indicates whether DHCPv6 snooping
is enabled globally.
If this object is set to 'true', admin mode
is enabled globally.
If this object is set to 'false', admin mode
is disabled globally.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.1 |
agentDhcpv6SnoopingVerifyMacThis object indicates whether source MAC address
in the received DHCPv6 message needs to be verified or not.
If this object is set to 'true', verifyMac
is enabled globally.
If this object is set to 'false', verifyMac
is disabled globally.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.2 |
agentDhcpv6SnoopingVlanConfigTableA table provides the mechanism to control DHCPv6 cnooping
per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added. SEQUENCE OF AgentDhcpv6SnoopingVlanConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.3 |
agentDhcpv6SnoopingVlanConfigEntryA row instance contains the configuration for DHCPv6
snooping at each existing VLAN. AgentDhcpv6SnoopingVlanConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.3.1 |
agentDhcpv6SnoopingVlanIndexThis object indicates the VLAN number on which DHCPv6 snooping
inspection feature is configured. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.3.1.1 |
agentDhcpv6SnoopingVlanEnableThis object indicates whether DHCPv6 snooping is
enabled in this VLAN.
If this object is set to 'true', DHCPv6 snooping
is enabled.
If this object is set to 'false', DHCPv6 snooping
is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.3.1.2 |
agentDhcpv6SnoopingIfConfigTableA table provides the mechanism to configure the trust
state for DHCPv6 snooping purpose at each
interface capable of this feature. SEQUENCE OF AgentDhcpv6SnoopingIfConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.4 |
agentDhcpv6SnoopingIfConfigEntryA row instance contains the configuration for
DHCPv6 snooping at each interface capable of this feature. AgentDhcpv6SnoopingIfConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.4.1 |
agentDhcpv6SnoopingIfTrustEnableThis object indicates whether the interface is trusted for
DHCPv6 snooping purpose.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.4.1.1 |
agentDhcpv6SnoopingIfLogEnableThis object indicates whether the logging needs on DHCPv6 snooping validations
or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.4.1.2 |
agentDhcpv6SnoopingIfRateLimitThis object indicates rate limit value for DHCPv6
snooping purpose. If the incoming rate of DHCPv6 packets
exceeds the value of this object for consecutively
burst interval seconds, DHCPv6 packets will be
dropped. Value of -1 indicates that there is no rate limit.rw Integer32 (-1|0..300) UNITS "packets per second" .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.4.1.3 |
agentDhcpv6SnoopingIfBurstIntervalThis object indicates the burst interval value
for rate limiting purpose on this interface. Value
of -1 indicates that there is no burst interval.rw Integer32 (-1|1..15) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.4.1.4 |
agentIpv6sgIfConfigTableA table provides the mechanism to configure the IPv6SG
at each physical interface capable of this feature. SEQUENCE OF AgentIpv6sgIfConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.5 |
agentIpv6sgIfConfigEntryA row instance contains the configuration for
IPv6SG at each physical interface capable of this feature. AgentIpv6sgIfConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.5.1 |
agentIpv6sgIfVerifySourceThis object indicates whether the interface is enabled for IPv6SG
to forward the data based up on source IP address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.5.1.1 |
agentIpv6sgIfPortSecurityThis object indicates whether the interface is enabled for IPv6SG
to forward the data based up on source mac address in snooping table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.5.1.2 |
agentDhcpv6SnoopingStatsResetClear the DHCPv6 snooping statistics on all ports. A value of reset(1)
is used to reset the statistics. A read on this object will
always return the value none(0). The value none(0) cannot
be forcibly set by the administrator.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.6 |
agentDhcpv6SnoopingStatsTableA table provides the mechanism for statics of DHCPv6 snooping. SEQUENCE OF AgentDhcpv6SnoopingStatsEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.7 |
agentDhcpv6SnoopingStatsEntryA row instance contains the DHCPv6 snooping statistics per interface. AgentDhcpv6SnoopingStatsEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.7.1 |
agentDhcpv6SnoopingMacVerifyFailuresThis object indicates the number of failure verifications of client MAC address with
source MAC address.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.7.1.1 |
agentDhcpv6SnoopingInvalidClientMessagesThis object indicates the number of invalid DHCPv6 release, request and decline messages.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.7.1.2 |
agentDhcpv6SnoopingInvalidServerMessagesThis object indicates the number of invalid DHCPv6 server mesaages.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.7.1.3 |
agentStaticIpv6sgBindingTableA table of the IPv6SG static entries. SEQUENCE OF AgentStaticIpv6sgBindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.8 |
agentStaticIpv6sgBindingEntryRepresents a binding in IPv6SG table. AgentStaticIpv6sgBindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.8.1 |
agentStaticIpv6sgBindingIfIndexInterface on which this IPv6SG binding is going to be added.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.8.1.1 |
agentStaticIpv6sgBindingVlanIdVLAN to which this IPv6SG binding is going to be added.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.8.1.2 |
agentStaticIpv6sgBindingIpAddrIPv6 address match value for the IPv6SG binding.rw Ipv6Address .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.8.1.3 |
agentStaticIpv6sgBindingMacAddrMAC address match value for the IPv6SG binding.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.8.1.4 |
agentStaticIpv6sgBindingRowStatusThe status of this conceptual row.
active(1) - this IPv6SG Binding is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.8.1.5 |
agentDynamicIpv6sgBindingTableA table of the IPv6SG dynamic entries. SEQUENCE OF AgentDynamicIpv6sgBindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.9 |
agentDynamicIpv6sgBindingEntryRepresents a binding in IPSG table. AgentDynamicIpv6sgBindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.9.1 |
agentDynamicIpv6sgBindingIfIndexInterface on which this IPv6SG binding is added.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.9.1.1 |
agentDynamicIpv6sgBindingVlanIdVLAN to which this IPv6SG binding is going to be added.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.9.1.2 |
agentDynamicIpv6sgBindingIpAddrSender IPv6 address match value for the IPv6SG binding.ro Ipv6Address .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.9.1.3 |
agentDynamicIpv6sgBindingMacAddrMAC address match value for the IPv6SG binding.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.9.1.4 |
agentStaticDsv6BindingTableA table of the DHCPv6 snooping static entries. SEQUENCE OF AgentStaticDsv6BindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.10 |
agentStaticDsv6BindingEntryRepresents a static binding in DHCPv6 snooping table. AgentStaticDsv6BindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.10.1 |
agentStaticDsv6BindingIfIndexInterface on which this static DHCPv6 snooping binding is going to be added.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.10.1.1 |
agentStaticDsv6BindingVlanIdVLAN to which this static DHCPv6 snooping binding is going to be added.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.10.1.2 |
agentStaticDsv6BindingMacAddrMAC address match value for the static DHCPv6 snooping binding.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.10.1.3 |
agentStaticDsv6BindingIpAddrIPv6 address match value for the static DHCPv6 snopoing binding.rw Ipv6Address .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.10.1.4 |
agentStaticDsv6BindingRowStatusThe status of this conceptual row.
active(1) - this static DHCPv6 snooping binding is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.10.1.5 |
agentDynamicDsv6BindingTableA table of the DHCPv6 snooping dynamic entries. SEQUENCE OF AgentDynamicDsv6BindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.11 |
agentDynamicDsv6BindingEntryRepresents a dynamic binding in DHCPv6 snooping table. AgentDynamicDsv6BindingEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.11.1 |
agentDynamicDsv6BindingIfIndexInterface on which this dynamic DHCPv6 snooping binding is added.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.11.1.1 |
agentDynamicDsv6BindingVlanIdVLAN to which this dynamic DHCPv6 snooping binding is added.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.11.1.2 |
agentDynamicDsv6BindingMacAddrMAC address match value for the dynamic DHCPv6 snooping binding.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.11.1.3 |
agentDynamicDsv6BindingIpAddrIPv6 address match value for the dynamic DHCPv6 snooping binding.ro Ipv6Address .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.11.1.4 |
agentDynamicDsv6BindingLeaseRemainingTimeThis specifies the period for which the dynamic DHCPv6 snooping binding is valid.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.11.1.5 |
agentDhcpv6SnoopingRemoteFileNameThis object indicates the file name on the remote machine
to save the DHCPv6 snooping bindings. This will be set only
when we have a valid remote IP.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.12 |
agentDhcpv6SnoopingRemoteIpAddrThis object indicates the IP address of the remote machine
to save the DHCPv6 snooping bindings. This will be set only
when we have a valid file name.rw IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.13 |
agentDhcpv6SnoopingStoreIntervalThis object indicates the perodic time interval
to save the DHCPv6 snooping bindings.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.33.14 |
agentSwitchSnoopSSMGroupTableThe (conceptual) table listing the IP multicast Source Specific Multicast
Groups for which there are members on a particular interface and VLAN. SEQUENCE OF AgentSwitchSnoopSSMGroupEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34 |
agentSwitchSnoopSSMGroupEntryAn entry (conceptual row) in the agentSwitchSnoopSSMGroupTable. AgentSwitchSnoopSSMGroupEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34.1 |
agentSwitchSnoopSSMGroupAddressTypeThe address type of the agentSwitchSnoopSSMGroupTable entry. This
value applies to both the agentSwitchSnoopSSMGroupAddress and the
agentSwitchSnoopSSMGroupLastReporter entries. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34.1.1 |
agentSwitchSnoopSSMGroupAddressThe IP multicast group address for which this entry
contains information. The InetAddressType, e.g.
IPv4 or IPv6, is identified by the
agentSwitchSnoopSSMGroupAddressType variable in the agentSwitchSnoopSSMGroup
table. InetAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34.1.2 |
agentSwitchSnoopSSMGroupIfIndexThe interface for which this entry contains information
for an IP multicast group address. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34.1.3 |
agentSwitchSnoopSSMGroupVlanIdThe VLAN for which this entry contains information
for an IP multicast group address. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34.1.4 |
agentSwitchSnoopSSMGroupLastReporterThe IP address of the source of the last membership report
received for this IP Multicast group address on this
interface and VLAN. The InetAddressType, e.g.
IPv4 or IPv6, is identified by the
agentSwitchSnoopSSMGroupAddressType variable in the agentSwitchSnoopSSMGroup
table.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34.1.5 |
agentSwitchSnoopSSMGroupSourceFilterModeThe state in which the interface is currently set. The
value indicates the relevance of the corresponding source
list entries in the SrcList Table (agentSwitchSnoopSSMSrcListTable).ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.34.1.6 |
agentSwitchSnoopSSMSrcListTableThe (conceptual) table listing the Source List entries
corresponding to each VLAN, interface and SSM multicast group pair on
a MGMD Snooping switch. SEQUENCE OF AgentSwitchSnoopSSMSrcListEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.35 |
agentSwitchSnoopSSMSrcListEntryAn entry (conceptual row) in the agentSwitchSnoopSSMSrcListTable. AgentSwitchSnoopSSMSrcListEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.35.1 |
agentSwitchSnoopSSMSrcListAddressTypeThe address type of the InetAddress variables in this
table. This value applies to the agentSwitchSnoopSSMSrcListHostAddress
and agentSwitchSnoopSSMSrcListAddress entries. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.35.1.1 |
agentSwitchSnoopSSMSrcListAddressThe IP multicast group address for which this entry
contains information. InetAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.35.1.2 |
agentSwitchSnoopSSMSrcListIfIndexThe interface for which this entry contains information
for an IP multicast group address. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.35.1.3 |
agentSwitchSnoopSSMSrcListVlanIdThe VLAN for which this entry contains information
for an IP multicast group address. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.35.1.4 |
agentSwitchSnoopSSMSrcListHostAddressThe host address to which this entry
corresponds. The agentSwitchSnoopSSMGroupSourceFilterMode value for
this Group address, interface and VLAN indicates whether this
Host address is included or excluded.ro InetAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.35.1.5 |
agentSwitchSnoopSSMFDBTableMGMD Snooping Source Specific Multicast
Forwarding database Table. SEQUENCE OF AgentSwitchSnoopSSMFDBEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36 |
agentSwitchSnoopSSMFDBEntryAn entry is created by IGMP Snooping for each group learned in the VLAN. AgentSwitchSnoopSSMFDBEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36.1 |
agentSwitchSnoopSSMFDBVlanIndexThis object indicates the VLAN in which the group is learned. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36.1.1 |
agentSwitchSnoopSSMFDBGroupAddressTypeThis object indicates IP multicast address type learned by MGMD Snooping. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36.1.2 |
agentSwitchSnoopSSMFDBGroupAddressThis object indicates IP multicast address learned by MGMD Snooping. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36.1.3 |
agentSwitchSnoopSSMFDBSourceAddressThis object indicates IP Source address learned by MGMD Snooping. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36.1.4 |
agentSwitchSnoopSSMFDBIncludePortListThis object indicates the set of ports on which MGMD
Membership Reports are received for the group indicating
interest to receive traffic sent to the group.ro AgentPortMask (DELL-REF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36.1.5 |
agentSwitchSnoopSSMFDBExcludePortListThis object indicates the set of ports on which MGMD
Membership Reports are received for the group indicating
interest to not to receive traffic sent to the group.ro AgentPortMask (DELL-REF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.8.36.1.6 |
agentTransferConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9 |
agentTransferUploadGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1 |
agentTransferUploadModeTransfer upload mode configures the mode to use when uploading from the
switch. The mode is either X/Y/ZMODEM, TFTP, SFTP or SCP. X/Y/ZMODEM is
valid only when the file transfer is initiated by the serial EIA 232 port.
on the Linux platform.
SFTP and SCP are only allowed if the SSH feature is present.
Upload to USB is actual only if the USB feature is present.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.1 |
agentTransferUploadServerIPTransfer upload server ip configures the IP address of the server
where the file is located. It is valid only when the Transfer Mode is
TFTP, SFTP, or SCP. The address is 4 integer bytes ranging from 0 to 255.
This object is deprecated in favour of agentTransferUploadServerAddress
and agentTransferUploadServerAddressType.rwdeprecated IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.2 |
agentTransferUploadPathTransfer upload tftppath configures the directory path where the file
is to be uploaded to. The switch remembers the last file path used.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.3 |
agentTransferUploadFilenameTransfer upload tftpfilename configures the file name for the file being
uploaded from the switch. It can be up to 32 alphanumeric characters.
The switch remembers the last file name used.
File path can be appended to the file name if the string is less than 17
characters. Otherwise, the File Path field will need to be used and the
File Name will be appended to the File Path as is. An example would be
File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr.
Note: File Name, File Path, and TFTP Server IP Address are applicable
only if the Transfer Mode is TFTP.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.4 |
agentTransferUploadDataTypeTransfer upload datatype configures the type of file to upload from the
switch.
The types for upload are:
- Code File
- Configuration File
- Operational log
- Startup logrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.5 |
agentTransferUploadStartTransfer upload start will start an upload transfer.
The agentTransferUploadMode object must not be set to xmodem(2),
ymodem(3), or zmodem(4) to initiate a transfer via SNMP.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.6 |
agentTransferUploadStatusIndicates the current status of an upload transfer.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.7 |
agentTransferUploadServerAddressTypeThe type of the tftpserverip address, as defined in the InetAddress MIB.
The agentTransferUploadServerAddress object is intepreted within the
context of agentTransferUploadServerAddressType. Only ipv4(1) and
ipv6(2) is supported at present.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.8 |
agentTransferUploadServerAddressTransfer upload tftpserverip configures the IP address of the server
where the file is to be uploaded to.It is valid only when the
Transfer Mode is TFTP, SFTP or SCP.
The type of this address is determined by the value of the
agentTransferUploadServerAddressType object.
The values for agentTransferUploadServerAddressType and
agentTransferUploadServerAddress must be consistent.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.9 |
agentTransferUploadImagenameTransfer upload image name. Sets the image to be uploaded as the specified
name. Imagename cannot be set to unknown(1) option. When no name is set
this object returns unknown(1) by default.
Note: Imagename, File Name, File Path, and Server IP Address are applicable
only if the Transfer Mode is TFTP, SFTP or SCP.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.10 |
agentTransferUploadUsernameUsername applicable only to secure upload types, i.e., SFTP or SCP.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.11 |
agentTransferUploadPasswordPassword applicable only to secure upload types, i.e. SFTP or SCP.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.12 |
agentTransferUploadRemoteFilenameTransfer upload remote filename configures the file name for the file being
created remotely. It can be up to 32 alphanumeric characters.
Note: File Name, File Path, and Server IP Address are applicable
only if the Transfer Mode is TFTP, SFTP or SCP.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.1.13 |
agentTransferDownloadGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2 |
agentTransferDownloadModeTransfer download mode configures the mode to use when downloading
to the switch. The mode is either X/Y/ZMODEM, TFTP, SFTP or SCP. X/Y/ZMODEM is valid only
when the file transfer is initiated by the serial EIA 232 port. Y/ZMODEM is
valid only on the Linux platform.
SFTP and SCP are only allowed if the SSH feature is present.
Download to USB is only allowed if the USB feature is present.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.1 |
agentTransferDownloadServerIPTransfer download tftpserverip configures the IP address of the server
where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP or
SCP.
The address is 4 integer bytes ranging from 0 to 255.
This object is deprecated in favour of agentTransferDownloadServerAddress
and agentTransferDownloadServerAddressType.rwdeprecated IpAddress .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.2 |
agentTransferDownloadPathTransfer download tftppath configures the directory path where the
file is located. The switch remembers the last file path used.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.3 |
agentTransferDownloadFilenameTransfer download tftpfilename configures the file name for the file
being downloaded to the switch. It can be up to 32 alphanumeric characters.
The switch remembers the last file name used.
File path can be appended to the file name if the string is less than 33
characters. Otherwise, the File Path field will need to be used and the
File Name will be appended to the File Path as is. An example would be
File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr.
Note: Imagename, File Name, File Path, and TFTP Server IP Address are applicable
only if the Transfer Mode is TFTP, SFTP or SCP and the object agentTransferDownloadDataType
download type is not set to code.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.4 |
agentTransferDownloadDataTypeTransfer download datatype configures the type of file to download to
the switch.
The types for download are:
code - Code File
config - Configuration File
sshkey-rsa1 - SSH-1 RSA Key File
sshkey-rsa2 - SSH-2 RSA Key PEM File
sshkey-dsa - SSH-2 DSA Key PEM File
sslpem-root - SSL Trusted Root Certificate PEM File
sslpem-server - SSL Server Certificate PEM File
sslpem-dhweak - SSL DH Weak Encryption Parameter PEM File
sslpem-dhstrong - SSL DH Strong Encryption Parameter PEM File
cli-banner - CLI Banner File
kernel - Kernel File
Note: SSH Key files can only be downloaded if SSH Server is administratively
disabled, and there are no active SSH sessions.
Kernel file can be downloaded only on raptor platform and linux operating system.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.5 |
agentTransferDownloadStartTransfer download start will start an download transfer.
The agentTransferDownloadMode object must not be set to xmodem(2),
ymodem(3), or zmodem(4) to initiate a transfer via SNMP.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.6 |
agentTransferDownloadStatusIndicates the current status of an download transfer.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.7 |
agentTransferDownloadServerAddressTypeThe type of the tftpserverip address, as defined in the InetAddress MIB.
The agentTransferDownloadServerAddress object is intepreted within the
context of agentTransferDownloadServerAddressType. Only ipv4(1) and
ipv6(2) is supported at present.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.8 |
agentTransferDownloadServerAddressTransfer download tftpserverip configures the IP address of the server
where the file is to be downloaded from.It is valid only when the
Transfer Mode is TFTP, SFTP, or SCP.
The type of this address is determined by the value of the
agentTransferDownloadServerAddressType object.
The values for agentTransferDownloadServerAddressType and
agentTransferDownloadServerAddress must be consistent.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.9 |
agentTransferDownloadImagenameTransfer download image name. Sets the downloaded image as the specified
name. Imagename cannot be set to unknown(1) option. When no name is set
this object returns unknown(1) by default.
Note: Imagename, File Name, File Path, and Server IP Address are applicable
only if the Transfer Mode is TFTP, SFTP or SCP.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.10 |
agentTransferDownloadUsernameUsername applicable only to secure download types, i.e., SFTP or SCP.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.11 |
agentTransferDownloadPasswordPassword applicable only to secure download types, i.e. SFTP or SCP.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.12 |
agentTransferDownloadRemoteFilenameTransfer download remote filename configures the file name for the file being
transferred from remote system. It can be up to 31 alphanumeric characters.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.2.13 |
agentImageConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3 |
agentImage1The image1 software version .roobsolete DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3.1 |
agentImage2The image2 software version.roobsolete DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3.2 |
agentActiveImageThe active image name. image1 or image2.roobsolete DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3.3 |
agentNextActiveImageThe next active image name.
user assigns either image1 or image2.rwobsolete DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3.4 |
agentActiveImageVersionThe software version of the active image.ro DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3.5 |
agentBackupImageVersionThe software version of the backup image if present.ro DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3.6 |
agentNextSelectedImageThe image selected for loading on next boot.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.9.3.7 |
agentPortMirroringGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10 |
agentMirroredPortIfIndexIfIndex of the mirrored portrwobsolete Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.1 |
agentProbePortIfIndexIfIndex of the probe portrwobsolete Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.2 |
agentPortMirroringModePort mirroring mode:
enable - enable mirroring mode
disable - disable mirroring mode
delete - clear MirroredPort and Probe Port configurationrwobsolete Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.3 |
agentPortMirrorTableThis table includes entries for each Port Mirroring session. SEQUENCE OF AgentPortMirrorEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4 |
agentPortMirrorEntryProvides configuration of a Port Mirroring session specifying the
destination port, and the source Port Mask, providing a many-to-one
mapping. AgentPortMirrorEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1 |
agentPortMirrorSessionNumThe Session number of this mirroring entry. The number of sessions is
fixed, and is platform dependant. Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.1 |
agentPortMirrorDestinationPortThe port which traffic from the mirrored ports will be sent to.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.2 |
agentPortMirrorSourcePortMaskThe ports from which traffic will be sent to the destination port.
The destination port can not be included in this list of ports.rw AgentPortMask (DELL-REF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.3 |
agentPortMirrorAdminModeThe status of this port mirroring session.
enable(1) - This session is active and all traffic from the source ports
will be mirrored to the destination port.
disable(2) - This session is not active.
delete(3) - Remove the configuration for this Sessionrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.4 |
agentPortMirrorSourceVlanThe vlan from which traffic will be sent to the destination port.rw Unsigned32(0|2..4093) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.5 |
agentPortMirrorRemoteSourceVlanThe remote vlan from which traffic will be sent to the destination port.rw Unsigned32(0|2..4093) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.6 |
agentPortMirrorRemoteDestinationVlanThe VLAN that forwards the network traffic to the destination switch.rw Unsigned32(0|2..4093) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.7 |
agentPortMirrorReflectorPortThe port to which traffic from the mirrored ports will be sent in case of destination being remote VLAN.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.8 |
agentPortMirrorIpAccessListNumberThe IP access-list number attached to the port mirroring session.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.10 |
agentPortMirrorMacAccessListNumberThe MAC access-list number attached to the port mirroring session.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.4.1.11 |
agentPortMirrorTypeTableThis table includes entries for each source port's direction of port mirroring. SEQUENCE OF AgentPortMirrorTypeEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.5 |
agentPortMirrorTypeEntryProvides configuration of a Port Mirroring direction specifying the
session of the port mirroring and source port AgentPortMirrorTypeEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.5.1 |
agentPortMirrorTypeSourcePortThe port from which traffic will be sent to the destination port.
This port should be a source port in the corresponding session Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.5.1.1 |
agentPortMirrorTypeTypeThe direction of the data to be mirrored on this source port.
tx(1) - The data that is transmitted from the source port.
rx(2) - The data that is received on the source port.
txrx(3) - The data that is transmitted/received from/on the source portrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.5.1.2 |
agentPortMirrorRemoteVlanThe VLAN configured as RSPAN VLAN.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.10.6 |
agentDot3adAggPortTableThis table provides 802.3ad link aggregation information for each
physical port that is not available through the standard MIB. SEQUENCE OF AgentDot3adAggPortEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.12 |
agentDot3adAggPortEntryInformation about a table entry. The agentDot3adAggPort identifies
the external interface number of the port. AgentDot3adAggPortEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.12.1 |
agentDot3adAggPortifIndex of this physical portro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.12.1.1 |
agentDot3adAggPortLACPModeEnable/disable 802.3ad LACP on this portrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.12.1.2 |
agentPortConfigTableA table of the switch's physical port config entries SEQUENCE OF AgentPortConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13 |
agentPortConfigEntrySwitch's physical port config entry AgentPortConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1 |
agentPortDot1dBasePortThe port number of this port.ro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.1 |
agentPortIfIndexThe switch's Port IfIndexro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.2 |
agentPortIanaTypeThe switch's Port Typero IANAifType (IANAifType-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.3 |
agentPortSTPModeThe switch's Port Spanning Tree Protocol Mode
STP mode values are:
dot1d (the default)
fast, indicates you want to use the fast spanning tree mode
off, indicates the STP mode is turned off for a particular port
This object is only supported when the Dot1d Protocol is enabled.rwobsolete Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.4 |
agentPortSTPStateThe switch's Port Spanning Tree Protocol State.
This object is only supported when the Dot1d Protocol is enabled.roobsolete Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.5 |
agentPortAdminModeThe switch's Port Admin Moderw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.6 |
agentPortPhysicalModeThe switch's Port Speed Mode. This is the configured physical mode.
This object is read-only for gigabit portsrwobsolete Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.7 |
agentPortPhysicalStatusThe switch's Port Physical Speed Status. This is the current actual speed.roobsolete Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.8 |
agentPortLinkTrapModeIf enabled, link up and link down traps will be sent for this port.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.9 |
agentPortClearStatsclear stats for this port onlyrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.10 |
agentPortDefaultTypeThis object identifies the default administrative port type,
to be used in conjunction with the operational port type
denoted by agentPortType.
The set of possible values for this object is
the same as the set defined for the agentPortType
object.
This object represents the administratively-configured type of
the MAU. If auto-negotiation is not enabled or is not
implemented for this MAU, the value of this object determines
the operational type of the MAU. In this case, a set to this
object will force the MAU into the specified operating mode.
If auto-negotiation is implemented and enabled for this MAU,
the operational type of the MAU is determined by auto-negotiation,
and the value of this object denotes the type to which the MAU
will automatically revert if/when auto-negotiation is later disabled.
The valid values for this object are:
dot3MauType10BaseTHD
dot3MauType10BaseTFD
dot3MauType100BaseTXHD
dot3MauType100BaseTXFD
dot3MauType100BaseFXFD
dot3MauType10GBaseSXrwobsolete OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.11 |
agentPortTypeThis object identifies the port type. An initial set of MAU types
are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to
new types of MAUs is managed by the IANA. If the MAU type is
unknown, the object identifier
unknownMauType OBJECT IDENTIFIER ::= { 0 0 }
is returned. Note that unknownMauType is a syntactically valid
object identifier, and any conformant implementation of ASN.1 and
the BER must be able to generate and recognize this value.
This object represents the operational type of the MAU, as determined
by either (1) the result of the auto-negotiation function or (2) if
auto-negotiation is not enabled or is not implemented for this MAU,
by the value of the object agentPortDefaultType, or (3) for the GigE card
a value determined by the GBIC connected to the card. In case (2), a
set to the object agentPortDefaultType will force the MAU into the
new operating mode.
The valid values for this object are:
dot3MauType10BaseTHD
dot3MauType10BaseTFD
dot3MauType100BaseTXHD
dot3MauType100BaseTXFD
dot3MauType100BaseFXFD
dot3MauType1000BaseSXFD
dot3MauType10GBaseSXro OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.12 |
agentPortAutoNegAdminStatusThis object identifies the administration status of auto negotiation
for this port.rwobsolete Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.13 |
agentPortDot3FlowControlModeConfig flowcontrol allows you to enable or disable
802.3x flow control for this port. This value
applies to only full-duplex mode ports. Enabling
asymmetric flow control allows the port to receive
pause frames but it will not transmit pause frames.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.14 |
agentPortDVlanTagModeControls the Double Vlan Tag mode on this port.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.15 |
agentPortDVlanTagEthertypeConfigures the Double Vlan Tag Ethertype for this port.
If this object is supported, ethertype cannot be configured
globally for the switch.
Commonly used are the Ethertypes for vman tags (34984, or 0x88A8)
and dot1q tags (33024, or 0x8100).rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.16 |
agentPortDVlanTagCustomerIdConfigures the Customer ID for the Double Vlan Tag for this port.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.17 |
agentPortMaxFrameSizeLimitThis object identifies the largest value that can be
configured for agentPortMaxFrameSizero Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.18 |
agentPortMaxFrameSizeThis object identifies the currently configured maximum frame size
value for this port. The maximmum value that this object can be set
to is the value of agentPortMaxFrameSizeLimit. For Ethernet ports
which support 802.1Q vlan tagging, the minimum value that this object
can be set to is 1522rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.19 |
agentPortBroadcastControlModeIf enabled, broadcast storm recovery will function on this port.
When you specify Enable for Broadcast Storm Recovery and the broadcast
traffic on this Ethernet port exceeds the configured threshold, the
switch blocks (discards) the broadcast traffic.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.20 |
agentPortBroadcastControlThresholdConfigures the broadcast storm recovery threshold for this port.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.21 |
agentPortMulticastControlModeIf enabled, multicast storm recovery will function on this port.
When you specify Enable for Multicast Storm Recovery and the multicast
traffic on this Ethernet port exceeds the configured threshold, the
switch blocks (discards) the multicast traffic.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.22 |
agentPortMulticastControlThresholdConfigures the multicast storm recovery threshold for this port.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.23 |
agentPortUnicastControlModeIf enabled, unicast storm recovery will function on this port.
When you specify Enable for Unicast Storm Recovery and the unknown unicast
traffic on this Ethernet port exceeds the configured threshold, the
switch blocks (discards) the unknown unicast traffic.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.24 |
agentPortUnicastControlThresholdConfigures the unicast storm recovery threshold for this port.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.25 |
agentPortSwitchportModerw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.26 |
agentPortVoiceVlanModeDescribes and Configures the Port Voice VLAN Mode.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.27 |
agentPortVoiceVlanIDDescribes and Configures the Port Voice VLAN ID
if the Voice Vlan Mode is Vlan ID.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.28 |
agentPortVoiceVlanPriorityDescribes and Configures the Port Voice VLAN Priority
if the Voice Vlan Mode is dot1p. A value of 255 indicates
that the priority is not configured.rw INTEGER (0..7|255) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.29 |
agentPortVoiceVlanDataPriorityModeDescribes and Configures the Port Voice VLAN Data Priority Mode.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.30 |
agentPortVoiceVlanOperationalStatusDescribes the Port Voice VLAN Operational Status.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.31 |
agentPortVoiceVlanAuthenticationModeDescribes and Configures the Port Voice VLAN Authentication Mode.
It is enabled by default. To disable, following are the pre-requisites.
Voice Vlan shall be enabled Globally,
Dot1x Admin Mode shall be enabled,
Dot1x port-control shall be mac-based,
and the port is required to be in General Mode.rwdeprecated Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.32 |
agentPortDot3FlowControlOperStatusThis object identifies operational status of the flow control per port.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.33 |
agentPortTransceiverFwPartNumberFirmware part number of 10GBASE-T transceiver.
For other ports, or if module is not inserted,
octet sting will be filled with 0xFF bytes.
See also next field, agentPortTransceiverFwRevision.
PN is an 8-byte field that contains ASCII characters,
left-aligned and padded on the right with ASCII spaces (0x20).
A field value of all zeros indicates that PN is unspecified.ro OCTET STRING .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.34 |
agentPortTransceiverFwRevisionFirmware revision of 10GBASE-T transceiver.
For other ports, or if module is not inserted,
octet sting will be filled with 0xFF bytes.
See also previous field, PortTransceiverFwPartNumber.
Rev is a 16-byte field that contains ASCII characters,
left-aligned and padded on the right with ASCII spaces (0x20).
A field value of all zeros indicates that Rev is unspecified.ro OCTET STRING .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.35 |
agentPortBroadcastControlThresholdUnitConfigures the units of the threshold value to percentage of
port speed or absolute packets per second.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.36 |
agentPortMulticastControlThresholdUnitConfigures the units of the threshold value to percentage of
port speed or absolute packets per second.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.37 |
agentPortUnicastControlThresholdUnitConfigures the units of the threshold value to percentage of
port speed or absolute packets per second.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.38 |
agentPortVoiceVlanUntaggedDescribes and Configures the Port Voice VLAN tagging mode.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.39 |
agentPortVoiceVlanNoneModeDescribes and Configures the Port Voice VLAN None mode.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.40 |
agentPortVoiceVlanDSCPDescribes and Configures the Port Voice VLAN DSCP value.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.41 |
agentPortVoiceVlanAuthModeDescribes and Configures the Port Voice VLAN Authentication mode.
Disable means authentication not required for voice devices when dot1x is enabled.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.42 |
agentPortAccessVlanIDDescribes and Configures the VLAN ID of access switch port.
A value of 0 indicates that the switch port is not configured as
access port.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.43 |
agentPortSpeedDuplexStatusThis object is used to set the speed and duplex settings for a port.
If auto-duplex(0) or speed-auto(3) is enabled, then auto-negotiation is
enabled.If auto-duplex(0) is set but speed-auto(3) is not set, then the
admin advertisements will be limited to the speed values enabled.
Likewise, if speed-auto(3) is set, but auto-duplex(0) is not, then the
advertisements will be limited to the duplex enabled.The na(8) will be
returned if neither a speed or duplex setting is set.rw Bits .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.44 |
agentPortNativeVlanIDDescribes and Configures the VLAN ID of Trunk switch port.
Configures the Native VLAN Id for the port.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.46 |
agentPortDDisableAutorecoveryTimeThe time in seconds left to port autorecovery from D-Disable state.ro INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.47 |
agentPortDDisableComponentsThe list of components put the port to D-Disable state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.48 |
agentPortLoadStatsIntervalThe length of time for which data is used to compute load statistics.
The value is given in seconds, and must be a multiple of 30. The allowable
range is 30 to 600 seconds.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.13.1.49 |
agentProtocolConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14 |
agentProtocolGroupCreateSet to non-empty string to create a Protocol-Based VLAN group.rwobsolete DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.1 |
agentProtocolGroupTableA table of the switch's Protocol-based VLAN entries SEQUENCE OF AgentProtocolGroupEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2 |
agentProtocolGroupEntrySwitch's Protocol-based VLAN entry AgentProtocolGroupEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1 |
agentProtocolGroupIdGroup identifier of the Protocol-based VLAN entry. Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1.1 |
agentProtocolGroupNameGroup name of the Protocol-based VLAN entry.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1.2 |
agentProtocolGroupVlanIdVLAN associated with the Protocol-based VLAN entry. Set to 0 to remove.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1.3 |
agentProtocolGroupProtocolIPThe status of the IP protocol association with the Protocol-based VLAN entry.rwobsolete Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1.4 |
agentProtocolGroupProtocolARPThe status of the ARP protocol association with the Protocol-based VLAN entry.rwobsolete Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1.5 |
agentProtocolGroupProtocolIPXThe status of the IPX protocol association with the Protocol-based VLAN entry.rwobsolete Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1.6 |
agentProtocolGroupStatusThe status of the Protocol-based VLAN entry.
active(1) - this entry is active
createAndGo(4) - used to create a new entry
destroy(6) - remove this entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.2.1.7 |
agentProtocolGroupPortTableA table of the switch's physical port config entries SEQUENCE OF AgentProtocolGroupPortEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.3 |
agentProtocolGroupPortEntrySwitch's physical port config entry AgentProtocolGroupPortEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.3.1 |
agentProtocolGroupPortIfIndexThe interface number of this instance.ro Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.3.1.1 |
agentProtocolGroupPortStatusThe status of this entry.
active(1) - the port is associated with this group
createAndGo(4) - add the port to this group
createAndWait(5) - add the port to this group
destroy(6) - remove the port from this grouprw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.3.1.2 |
agentProtocolGroupProtocolTableA table of the switch's physical port config entries SEQUENCE OF AgentProtocolGroupProtocolEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.4 |
agentProtocolGroupProtocolEntrySwitch's physical port config entry AgentProtocolGroupProtocolEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.4.1 |
agentProtocolGroupProtocolIDThe protocol ID of this instance. The value for IP is 2048 (0x0800), ARP is 2054 (0x0806) and IPX is 33079 (0x8137).
Other protocol Ids in the range 1536 to 65535 can also be configured. Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.4.1.1 |
agentProtocolGroupProtocolStatusThe status of this entry.
active(1) - the port is associated with this group
createAndGo(4) - add the port to this group
createAndWait(5) - add the port to this group
destroy(6) - remove the port from this grouprw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.14.4.1.2 |
agentStpSwitchConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15 |
agentStpConfigDigestKeyThe MST configuration digest key.ro OCTET STRING .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.1 |
agentStpConfigFormatSelectorThe MST configuration format selector. A value other than 0 (zero)
indicates non-support for the IEEE 802.1s standard.ro Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.2 |
agentStpConfigNameThe MST configuration name of at most 32 characters.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.3 |
agentStpConfigRevisionThe MST configuration revision. The default value is 0.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.4 |
agentStpForceVersionThe MST configuration force protocol version. The default version is dot1w.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.5 |
agentStpAdminModeThe spanning tree operational status.
enable(1) - enables spanning tree operational status on the switch.
disable(2) - disables spanning tree operational status on the switch.
The default status is enabled.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.6 |
agentStpPortTableSTP port table. SEQUENCE OF AgentStpPortEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7 |
agentStpPortEntrySTP port entry. AgentStpPortEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1 |
agentStpPortStateThe administrative STP state for the port.
enable(1) - enables STP on the port.
disable(2) - disables STP on the port.
The default port STP state is enabled for the first 4095
ports and disabled for any ports beyond.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.1 |
agentStpPortStatsMstpBpduRxThe MSTP BPDUs received on a specific port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.2 |
agentStpPortStatsMstpBpduTxThe MSTP BPDUs sent from a specific port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.3 |
agentStpPortStatsRstpBpduRxThe RSTP BPDUs received on a specific port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.4 |
agentStpPortStatsRstpBpduTxThe RSTP BPDUs sent from a specific port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.5 |
agentStpPortStatsStpBpduRxThe STP BPDUs received on a specific port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.6 |
agentStpPortStatsStpBpduTxThe STP BPDUs sent from a specific port.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.7 |
agentStpPortUpTimeTime since port was reset.
It is displayed in days, hours, minutes, and seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.8 |
agentStpPortMigrationCheckForce the specified port to transmit RSTP or MSTP BPDU's.
Supported values:
false(0) - BPDUs are not to be transmitted.
true(1) - BPDUs are to be transmitted
A non-zero value indicates that BPDUs are to be sent on the specified port.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.9 |
agentStpPortRootGuardManage root-guard on the specified interface.
Supported values:
false(0) - Root-guard is disabled.
true(1) - Root-guard is enabled.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.7.1.10 |
agentStpCstConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8 |
agentStpCstHelloTimeThe MSTP root port hello time for the CIST.ro Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.1 |
agentStpCstMaxAgeThe MSTP root port max age for the CIST.ro Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.2 |
agentStpCstRegionalRootIdThe MSTP regional root identifier for the CIST.ro OCTET STRING .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.3 |
agentStpCstRegionalRootPathCostThe MSTP regional root path cost for the CIST.ro Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.4 |
agentStpCstRootFwdDelayThe MSTP root port forward delay for the CIST.ro Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.5 |
agentStpCstBridgeFwdDelayThe MSTP bridge forward delay for the CIST. The default value is 15.
This value must be >= ((MSTP root port max age/2) + 1).rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.6 |
agentStpCstBridgeHelloTimeThe MSTP bridge hello time for the CIST. The default value is 2.According to IEEE 802.1Q-REV 2005 updating
hello time is disallowedro Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.7 |
agentStpCstBridgeHoldTimeThe MSTP bridge hold time for the CIST.ro Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.8 |
agentStpCstBridgeMaxAgeThe MSTP bridge max age for the CIST. The default value is 20.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.9 |
agentStpCstBridgeMaxHopsThe MSTP bridge max hops for the CIST. The default value is 20.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.10 |
agentStpCstBridgePriorityThe MSTP bridge priority for the CIST. The default value is 32768.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.11 |
agentStpCstBridgeHoldCountThe MSTP bridge hold count for the CIST. This command sets the value of
maximum bpdus that a bridge is allowed to send within a hello time window.
The default value is 6.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.8.12 |
agentStpCstPortTableCIST port table. SEQUENCE OF AgentStpCstPortEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9 |
agentStpCstPortEntryCIST port entry. AgentStpCstPortEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1 |
agentStpCstPortOperEdgeThe MSTP operational status of a specific port for the CIST.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.1 |
agentStpCstPortOperPointToPointThe MSTP operational point to point mac of a specific port for the CIST.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.2 |
agentStpCstPortTopologyChangeAckThe MSTP topology change acknowledge for a specific port in the CIST.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.3 |
agentStpCstPortEdgeThe administrative state of a specific port in CIST.
enable(1) - enables the port.
disable(2) - disables the port.
The default port state is disabled. For the M6220, the default port state
is enabled for internal ports and disabled for external ports.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.4 |
agentStpCstPortForwardingStateThe MSTP forwarding state of a specific port in CIST.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.5 |
agentStpCstPortIdThe MSTP port identifier of a specific port in CIST.ro PortId .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.6 |
agentStpCstPortPathCostThe MSTP port path cost in CIST. The default value will
correspond to the recommendation specified in IEEE 802.1s Table 13-2
which varies depending upon link speed.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.7 |
agentStpCstPortPriorityThe MSTP port priority in CIST. The priority is
in the increments of 16. The default value is 128.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.8 |
agentStpCstDesignatedBridgeIdThe MSTP designated bridge ID of a specific port in CIST.ro OCTET STRING .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.9 |
agentStpCstDesignatedCostThe MSTP designated cost of a specific port in CIST.ro Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.10 |
agentStpCstDesignatedPortIdThe MSTP designated port ID of a specific port in CIST.ro PortId .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.11 |
agentStpCstExtPortPathCostThe MSTP external port path cost in CIST. The default value varies depending upon the link speed.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.12 |
agentStpCstPortBpduGuardEffectBPDU Guard Mode effect on the port.
enable(1) - BPDU Guard Mode is enabled on the port.
disable(2) - BPDU Guard Mode is disabled on the port.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.13 |
agentStpCstPortBpduFilterThis command sets BPDU Filter mode on the port.
enable(1) - BPDU Filter Mode is enabled on the port.
disable(2) - BPDU Filter Mode is disabled on the port.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.14 |
agentStpCstPortBpduFloodThis command sets BPDU Flood mode on the port.
enable(1) - BPDU Flood Mode is enabled on the port.
disable(2) - BPDU Flood Mode is disabled on the port.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.15 |
agentStpCstPortAutoEdgeThis command sets the auto-edge mode of the port which enables it
to become an edge port if it does not see BPDUs for some duration.
enable(1) - enables the auto-edge mode for the port.
disable(2) - disables the auto-edge mode for the port.
The default auto-edge mode is disabled.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.16 |
agentStpCstPortRootGuardThis command sets a port to discard any superior information
received by the port and thus protect against root of the device
from changing.The port gets put into discarding state and does
not forward any packets.
enable(1) - enables the root-guard mode for the port.
disable(2) - disables the root-guard mode for the port.
The default root-guard mode is disabled.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.17 |
agentStpCstPortTCNGuardThis command restricts the port from propagating any topology change
information received through that port.
enable(1) - enables the tcn-guard mode for the port.
disable(2) - disables the tcn-guard mode for the port.
The default tcn-guard mode is disabled.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.18 |
agentStpCstPortLoopGuardThis command enables loop guard on this port. This setting applies
to all Spanning Tree instances of which this port is a member.
enable(1) - enables the loop guard mode for the port.
disable(2) - disables the loop guard mode for the port.
The default loop-guard mode is disabled.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.9.1.19 |
agentStpMstTableMST table. SEQUENCE OF AgentStpMstEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10 |
agentStpMstEntryMST entry. AgentStpMstEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1 |
agentStpMstIdThe MSTP instance ID.ro Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.1 |
agentStpMstBridgePriorityThe MSTP bridge priority in a specific instance. The priority is
in the increments of 4096. The recommended default value is 32768.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.2 |
agentStpMstBridgeIdentifierThe MSTP bridge identifier in a specific instance.ro OCTET STRING .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.3 |
agentStpMstDesignatedRootIdThe MSTP designated root bridge identifier in a specific instance.ro OCTET STRING .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.4 |
agentStpMstRootPathCostThe MSTP root path cost in a specific instance.ro Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.5 |
agentStpMstRootPortIdThe MSTP root port ID in a specific instance.ro OCTET STRING .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.6 |
agentStpMstTimeSinceTopologyChangeThe MSTP time since the last topology change in a specific instance.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.7 |
agentStpMstTopologyChangeCountThe MSTP count of topology changes in a specific instance.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.8 |
agentStpMstTopologyChangeParmThe MSTP topology change parameter in a specific instance.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.9 |
agentStpMstRowStatusThe MSTP instance status.
Supported values:
active(1) - valid instance.
createAndGo(4) - used to create a new instance.
destroy(6) - removes an instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.10.1.10 |
agentStpMstPortTableMST port table. SEQUENCE OF AgentStpMstPortEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11 |
agentStpMstPortEntryMST port entry. AgentStpMstPortEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1 |
agentStpMstPortForwardingStateThe MSTP forwarding state of a specific port in a specific instance.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.1 |
agentStpMstPortIdThe MSTP port identifier of a specific port in a specific instance.ro OCTET STRING .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.2 |
agentStpMstPortPathCostThe MSTP port path cost in a specific instance. The default value will
correspond to the recommendation specified in IEEE 802.1s Table 13-2
which varies depending upon link speed.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.3 |
agentStpMstPortPriorityThe MSTP port priority in a specific instance. The priority is
in the increments of 16. The default value is 128.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.4 |
agentStpMstDesignatedBridgeIdThe MSTP designated bridge ID of a specific port in a specific instance.ro OCTET STRING .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.5 |
agentStpMstDesignatedCostThe MSTP designated cost of a specific port in a specific instance.ro Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.6 |
agentStpMstDesignatedPortIdThe MSTP designated port ID of a specific port in a specific instance.ro PortId .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.7 |
agentStpMstPortLoopInconsistentStateThe loop inconsistent state of a specific port in a specific instance.
This value can only report as true(1) when loop guard is enabled on the port
and the port has transitioned from blocking state in this MST instance.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.8 |
agentStpMstPortTransitionsIntoLoopInconsistentStateThe number of times this interface has transitioned into loop inconsistent state.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.9 |
agentStpMstPortTransitionsOutOfLoopInconsistentStateThe number of times this interface has transitioned out of loop inconsistent state.ro Counter32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.11.1.10 |
agentStpMstVlanTableMST VLAN table. SEQUENCE OF AgentStpMstVlanEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.12 |
agentStpMstVlanEntryMST VLAN entry. AgentStpMstVlanEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.12.1 |
agentStpMstVlanRowStatusThe association status of an MSTP instance and a VLAN.
Supported values:
active(1) - valid association between an MSTP instance and a VLAN.
createAndGo(4) - used to create a new association between an MSTP instance and a VLAN.
destroy(6) - removes the association between an MSTP instance and a VLAN.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.12.1.1 |
agentStpBpduGuardModeThe spanning tree BPDU Guard Mode.
enable(1) - enables BPDU Guard Mode on the switch.
disable(2) - disables BPDU Guard Mode on the switch.
The default status is disabled.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.13 |
agentStpBpduFilterDefaultThe spanning tree BPDU Filter Mode, it enables BPDU Filter on all
edge ports.
enable(1) - enables BPDU Filter Mode on the switch.
disable(2) - disables BPDU Filter Mode on the switch.
The default status is disabled.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.15.14 |
agentAuthenticationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16 |
agentAuthenticationListCreateAuthentication List Create
If set to a non empty string, creates a new Authentication List for
configuration.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.1 |
agentAuthenticationListTableAuthentication List table. SEQUENCE OF AgentAuthenticationListEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2 |
agentAuthenticationListEntryAuthentication List entry. AgentAuthenticationListEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1 |
agentAuthenticationListIndexAuthentication List Index
Unique number used for indexing into this table. Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.1 |
agentAuthenticationListNameAuthentication List Name
Unique name used to identify the Authentication List from other tables.ro DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.2 |
agentAuthenticationListMethod1Authentication List Method 1
Configures the first authentication method to use when this list is
specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.3 |
agentAuthenticationListMethod2Authentication List Method 2
Configures the second authentication method to use when this list is
specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.4 |
agentAuthenticationListMethod3Authentication List Method 3
Configures the third authentication method to use when this list is
specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.5 |
agentAuthenticationListStatusThe status of the Authentication List.
Supported values:
active(1) - indicates a valid Authenticaiton List
destroy(6) - removes the Authentication List.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.6 |
agentAuthenticationListMethod4Authentication List Method 4
Configures the fourth authentication method to use when this list is
specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.7 |
agentAuthenticationListMethod5Authentication List Method 5
Configures the fifth authentication method to use when this list is
specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.2.1.8 |
agentUserConfigDefaultAuthenticationListDefault Authentication List
This object configures which authentication list to use for users
which do not have an Authentication List configured. The list
must be configured before setting.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.3 |
agentUserAuthenticationConfigTableUser Authentication Config Table SEQUENCE OF AgentUserAuthenticationConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.4 |
agentUserAuthenticationConfigEntryUser Authentication Config Entry AgentUserAuthenticationConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.4.1 |
agentUserAuthenticationListUser Authentication List
This object configures which authentication list to use for this
user. The list must be configured before setting.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.4.1.1 |
agentUserPortConfigTableUser Port Config Table SEQUENCE OF AgentUserPortConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.5 |
agentUserPortConfigEntryUser Port Config Entry AgentUserPortConfigEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.5.1 |
agentUserPortSecurityUser Port Port Security
This object configures which ports the user has access to.
Ports are indexed based on dot1dBasePort entries in
dot1dBasePortTable.rw AgentPortMask (DELL-REF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.16.5.1.1 |
agentClassOfServiceGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.17 |
agentClassOfServicePortTableA table that contains information about the 802.1p priority
mapping to traffic class priority queue for every physical port. SEQUENCE OF AgentClassOfServicePortEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.17.1 |
agentClassOfServicePortEntryA 802.1p priority mapped to a traffic class priority queue. AgentClassOfServicePortEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.17.1.1 |
agentClassOfServicePortPriorityThe Priority value determined for the received frame.
This value is equivalent to the priority indicated in
the tagged frame received, or one of the evaluated
priorities, determined according to the media-type.
For untagged frames received from Ethernet media, this
value is equal to the dot1dPortDefaultUserPriority value
for the ingress port. INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.17.1.1.1 |
agentClassOfServicePortClassTraffic class priority queue the received frame is mapped to.rw INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.17.1.1.2 |
agentLinkDependencyGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18 |
agentLinkDependencyGroupTableA table for link dependencies entries. SEQUENCE OF AgentLinkDependencyGroupEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18.1 |
agentLinkDependencyGroupEntryLink Dependency Group Entry. AgentLinkDependencyGroupEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18.1.1 |
agentLinkDependencyGroupIdGroup identifier of the Link Dependency entry.
Maximum of 16 group entries exists on the switch
but they are not configured on the switch. Groups
are configured only when member ports are
added to the group or ports dependent on member
ports are added to the group. INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18.1.1.1 |
agentLinkDependencyGroupStatusThe status of this entry.
active(1) - the group has a valid configuration
notReady(3) - the group has an incomplete configuration
destroy(6) - remove the group
destroy is the only RowStatus which can be set.
The others are read-only.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18.1.1.2 |
agentLinkDependencyGroupMemberPortMaskMember Port Mask.
This mask defines the member ports of this group.
To obtain port numbers from interface numbers, use the objects
agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable
table.rw AgentPortMask (DELL-REF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18.1.1.3 |
agentLinkDependencyGroupDependsOnPortMaskDepended Upon Port Mask.
This mask defines the ports upon which the members of this group depend.
To obtain port numbers from interface numbers, use the objects
agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable
table.rw AgentPortMask (DELL-REF-MIB) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18.1.1.4 |
agentLinkDependencyGroupActionGroup action refers to action taken by the dependent ports
when the member ports go down.
LINK-DOWN(0) members go down when dependent link goes down,
LINK-UP(1) members go up when dependent link goes downrw INTEGER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.18.1.1.5 |
agentOperationalModeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.20 |
agentOperationalModeSimpleThis defines the Operational mode for the switch: Simple/Normal.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.20.1 |
agentHTTPConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.21 |
agentHTTPWebModeConfigures the HTTP server admin moderw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.21.1 |
agentHTTPJavaModeConfigures the use of the Java interface through Web connections.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.21.2 |
agentAutoInstallConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.22 |
agentAutoinstallModeEnable/Disable Autoinstall persistent mode on device.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.22.1 |
agentAutoinstallAutosaveModeEnable/Disable Auto Save of downloaded configuration on device.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.22.2 |
agentAutoinstallUnicastRetryCountSets number of unicast TFTP attempts for configuration file.rw Integer32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.22.3 |
agentAutoinstallStatusDisplay current Autoinstall status on device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.22.4 |
agentAutoinstallAutoRebootModeEnable/Disable Auto Reboot after succesfull image update on device.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.22.5 |
agentAutoinstallOperationalModeEnable/Disable Autoinstall operational mode on device.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.22.6 |
agentVlanSwitchportTrunkModeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.23 |
agentVlanSwitchportTrunkModeTableA table containing static configuration information for
each VLAN configured for Switcgport Trunk mode. SEQUENCE OF AgentVlanSwitchportTrunkModeEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.23.1 |
agentVlanSwitchportTrunkModeEntrySwitchPort Trunk Mode Membership. AgentVlanSwitchportTrunkModeEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.23.1.1 |
agentVlanSwitchportTrunkStaticEgressPortsThis field contains all the ports which include the VLAN for Trunk mode.rw ProtectedPortList .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.23.1.1.1 |
agentVlanSwitchportTrunkForbiddenPortsThis field contains all the ports which include the VLAN for Trunk mode.rw ProtectedPortList .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.23.1.1.2 |
agentExecAccountingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25 |
agentExecAccountingListCreateExecAccounting List Create
if set to a non empty string, creates a new ExecAccounting List for
configuration.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.1 |
agentExecAccountingListTableExecAccounting Method List table. SEQUENCE OF AgentExecAccountingListEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2 |
agentExecAccountingListEntryExecAccounting Method List Entry. AgentExecAccountingListEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2.1 |
agentExecAccountingListIndexExecAccounting List Index
Unique number used for indexing into this table. Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2.1.1 |
agentExecAccountingListNameUnique name used to identify the ExecAccounting List from other tables.ro DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2.1.2 |
agentExecAccountingMethodTypeExecAccounting Method Type
Configures the method type to use when this ExecAccounting list is
specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2.1.3 |
agentExecAccountingListMethod1ExecAccounting List Method 1
Configures the authentication method to use when this list is specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2.1.4 |
agentExecAccountingListMethod2ExecAccounting List Method 2
Configures the authentication method to use when this list is specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2.1.5 |
agentExecAccountingListStatusThe status of the ExecAccounting List.
Supported values:
active(1) - indicates a valid ExecAccounting List
destroy(6) - removes the ExecAccounting List.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.25.2.1.6 |
agentCmdsAccountingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26 |
agentCmdsAccountingListCreateCmdsAccounting List Create
if set to a non empty string, creates a new CmdsAccounting List for
configuration.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.1 |
agentCmdsAccountingListTableCmdsAccounting Method List table. SEQUENCE OF AgentCmdsAccountingListEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.2 |
agentCmdsAccountingListEntryCmdsAccounting Method List Entry. AgentCmdsAccountingListEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.2.1 |
agentCmdsAccountingListIndexCmdsAccounting List Index
Unique number used for indexing into this table. Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.2.1.1 |
agentCmdsAccountingListNameUnique name used to identify the CmdsAccounting List from other tables.ro DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.2.1.2 |
agentCmdsAccountingMethodTypeCmdsAccounting Method Type
Configures the method type to use when this CmdsAccounting list is
specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.2.1.3 |
agentCmdsAccountingListMethod1CmdsAccounting List Method 1
Configures the authentication method to use when this list is specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.2.1.4 |
agentCmdsAccountingListStatusThe status of the CmdsAccounting List.
Supported values:
active(1) - indicates a valid CmdsAccounting List
destroy(6) - removes the CmdsAccounting List.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.26.2.1.5 |
agentCmdsAuthorizationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27 |
agentCmdsAuthorizationListCreateCommand Authorization List Create.
If set to a non empty string, creates a new
Command Authorization List for configuration.
List name must contain Alphanumeric characters including
'-', '_', ' '.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.1 |
agentCmdsAuthorizationListTableCommand Authorization Method List table. SEQUENCE OF AgentCmdsAuthorizationListEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.2 |
agentCmdsAuthorizationListEntryCommand Authorization Method List Entry. AgentCmdsAuthorizationListEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.2.1 |
agentCmdsAuthorizationListIndexCommand Authorization List Index
Unique number used for indexing into this table. Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.2.1.1 |
agentCmdsAuthorizationListNameCommand Authorization List Name
Unique name used to identify the Command Authorization
List from other tables.ro DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.2.1.2 |
agentCmdsAuthorizationListStatusThe status of the CmdsAuthorization List.
Supported values:
active(1) - indicates a valid CmdsAuthorization List
destroy(6) - removes the CmdsAuthorization List.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.2.1.3 |
agentCmdsAuthorizationListMethod1Command Authorization List Method1
Configures the Command Authorization method to use when
this list is specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.2.1.4 |
agentCmdsAuthorizationListMethod2Command Authorization List Method2
Configures the Command Authorization method to use when
this list is specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.27.2.1.5 |
agentExecAuthorizationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28 |
agentExecAuthorizationListCreateExec Authorization List Create.
If set to a non empty string, creates a new
Exec Authorization List for configuration.
List name must contain Alphanumeric characters including
'-', '_', ' '.rw DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.1 |
agentExecAuthorizationListTableExec Authorization Method List table. SEQUENCE OF AgentExecAuthorizationListEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2 |
agentExecAuthorizationListEntryExec Authorization Method List Entry. AgentExecAuthorizationListEntry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1 |
agentExecAuthorizationListIndexExec Authorization List Index
Unique number used for indexing into this table. Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1.1 |
agentExecAuthorizationListNameExec Authorization List Name
Unique name used to identify the Exec Authorization
List from other tables.ro DisplayString .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1.2 |
agentExecAuthorizationListStatusThe status of the ExecAuthorization List.
Supported values:
active(1) - indicates a valid ExecAuthorization List
destroy(6) - removes the ExecAuthorization List.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1.3 |
agentExecAuthorizationListMethod1Exec Authorization List Method1
Configures the Exec Authorization method to use when
this list is specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1.4 |
agentExecAuthorizationListMethod2Exec Authorization List Method2
Configures the Exec Authorization method to use when
this list is specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1.5 |
agentExecAuthorizationListMethod3Exec Authorization List Method3
Configures the Exec Authorization method to use when
this list is specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1.6 |
agentExecAuthorizationListMethod4Exec Authorization List Method4
Configures the Exec Authorization method to use when
this list is specified.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.2.28.2.1.7 |
agentSystemGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3 |
agentSaveConfigenable(1) will initiate an configuration save to nvram.
Status is returned by the object agentSaveConfigStatus.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.1 |
agentClearConfigclear config to factory defaultsrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.2 |
agentClearLagsclear lag configurationrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.3 |
agentClearLoginSessionsclose all telnet sessionsrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.4 |
agentClearPasswordsreset passwordsrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.5 |
agentClearPortStatsclear all port statisticsrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.6 |
agentClearSwitchStatsclear all switch statisticsrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.7 |
agentClearTrapLogclear trap logrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.8 |
agentClearVlanclear vlan entriesrw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.9 |
agentResetSystemResets the switch.
This object is not valid for stacking platforms.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.10 |
agentSaveConfigStatusIndicates the current status of an save configuration request.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.11 |
agentStartupConfigEraseErase the text-based configuration file stored in
non-volatile memory.On read returns 0.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.3.12 |
agentCableTesterGroup OBJECT IDENTIFIER .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.4 |
agentCableTesterStatusStatus of the Virtual Cable Tester
active(1) - cable testing is in progress. Set to this value
to start the test.
success(2) - A successful test was performed. Cannot be set.
failure(3) - A failure was encountered during the test.
Cannot be set.
uninitialized(4) - No test has been performed yet. Cannot be set.rw Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.4.1 |
agentCableTesterIfIndexDetermines on which port to perform the cable test. Limited to
copper based ports.rw Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.4.2 |
agentCableTesterCableStatusIndicates the results of the Cable Test.
normal(1) - The cable is working correctly.
open(2) - The cable is disconnected or there is a faulty
connector.
short(3) - There is an electrical short in the cable.
unknown(4) - No test has been performed yet, or a test is
currently in progress.ro Enumeration .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.4.3 |
agentCableTesterMinimumCableLengthThe estimated length of the cable in meters. This value
indicates the shortest length estimated. This object will
return 0 if agentCableTesterStatus is not success(2) or the cable
length is unknown.ro Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.4.4 |
agentCableTesterMaximumCableLengthThe estimated length of the cable in meters. This value
indicates the longest length estimated. This object will
return 0 if agentCableTesterStatus is not success(2) or the cable
length is unknown.ro Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.4.5 |
agentCableTesterCableFailureLocationThe estimated distance in meters from the end of the cable to
the failure location. This object will return 0 if
agentCableTesterStatus is not success(2).ro Unsigned32 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.4.6 |