VERILINK-ENTERPRISE-NCMM13-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
190
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
190 total| Object Name |
|---|
RFC1213-MIBThe m13 DS3 Port table. Unknown .1.3.6.1.4.1.321.1.3037.14000 |
ncmm13StatTableThe m13 Stats. SEQUENCE OF Ncmm13StatEntry .1.3.6.1.4.1.321.1.3037.14001 |
ncmm13StatEntryAn entry in the m13 stats table. Ncmm13StatEntry .1.3.6.1.4.1.321.1.3037.14001.1 |
ncmm13StatNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3037.14001.1.1 |
ncmm13StatIndexThe index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance.ro INTEGER .1.3.6.1.4.1.321.1.3037.14001.1.2 |
ncmm13StatAISPort Status m13 AIS off/on.ro Enumeration .1.3.6.1.4.1.321.1.3037.14001.1.3 |
ncmm13StatIdleport Status m13 Idle off/on.ro Enumeration .1.3.6.1.4.1.321.1.3037.14001.1.4 |
ncmm13StatYellowAlmPort Status m13 Yellow Alarm off/on.ro Enumeration .1.3.6.1.4.1.321.1.3037.14001.1.5 |
ncmm13StatOOFport status m13 off/on.ro Enumeration .1.3.6.1.4.1.321.1.3037.14001.1.6 |
ncmm13StatLOSPort Status m13 LOS off/on.ro Enumeration .1.3.6.1.4.1.321.1.3037.14001.1.7 |
ncmm13DS3NearEndLocalLoopbackPort Status m13 Ds3 Local Loopback off/on.ro Enumeration .1.3.6.1.4.1.321.1.3037.14001.1.8 |
ncmm13DS3NearEndLineLoopbackPort Status m13 ds3 near end Line loopback off/on.ro Enumeration .1.3.6.1.4.1.321.1.3037.14001.1.9 |
ncmm13DS3FarEndLineLoopbackPort Status m13 ds3 far end line loopback off/on.ro Enumeration .1.3.6.1.4.1.321.1.3037.14001.1.10 |
ncmm13T1NearEndLineLoopbackPort Status m13 T1 near end line loopback.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.1.3037.14001.1.11 |
ncmm13T1FarEndLineLoopbackPort Status m13 T1 Far end line loopback.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.1.3037.14001.1.12 |
ncmm13FarEndAllT1LineLoopbackPort Status m13 T1 Far End All T1 Line Loopback.ro Enumeration .1.3.6.1.4.1.321.1.3037.14001.1.13 |
ncmm13T1LocalLoopbackPort Status m13 T1 Local loopback.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.1.3037.14001.1.14 |
ncmm13CurrentTableThe m13 Current table. SEQUENCE OF Ncmm13CurrentEntry .1.3.6.1.4.1.321.1.3037.14002 |
ncmm13CurrentEntryAn entry in the m13 Current table. Ncmm13CurrentEntry .1.3.6.1.4.1.321.1.3037.14002.1 |
ncmm13CurrentNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3037.14002.1.1 |
ncmm13CurrentIndexThe index value which uniquely identifies the
m13 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmhdmLineIndex object instance.ro INTEGER .1.3.6.1.4.1.321.1.3037.14002.1.2 |
ncmm13CurrentCRCStatusCurrent CRC4 Status.ro Enumeration .1.3.6.1.4.1.321.1.3037.14002.1.3 |
ncmm13CurrentTimeStampSecsCurrent Time in seconds.ro INTEGER .1.3.6.1.4.1.321.1.3037.14002.1.4 |
ncmm13CurrentTimeStampMSecsCurrent Time in milliseconds.ro INTEGER .1.3.6.1.4.1.321.1.3037.14002.1.5 |
ncmm13CurrentIntervalSecsElapsSeconds elapsed in the current interval.ro INTEGER .1.3.6.1.4.1.321.1.3037.14002.1.6 |
ncmm13CurrentFarEndCCVThe counter associated with the number of
Far End C-bit Code Violations,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.7 |
ncmm13CurrentFarEndCESThe counter associated with the number of
Far End C-bit Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.8 |
ncmm13CurrentFarEndCSESThe counter associated with the number of
Far End C-bit Severely Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.9 |
ncmm13CurrentFarEndLUASFar End Line Unavailable Seconds. The counter associated
with the number of Seconds the Far End m13 interface
was Out Of Service in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.10 |
ncmm13CurrentLCVThe counter associated with the number of Line
Code Violations, a bipolar or excesive zero violation,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.11 |
ncmm13CurrentLESLine Errored Second Total. The counter associated
with the number of Seconds of in which one or more
LCV occurred in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.12 |
ncmm13CurrentLSESThe counter associated with the number of
Line Severely Errored Seconds (LSES) in
the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.13 |
ncmm13CurrentPCVThe counter associated with the number
of Parity Code Violations (locally calculated P-bits
disagree with those received),
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.14 |
ncmm13CurrentPESThe counter associated with the number of Seconds
having at least one Parity Code Violation,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.15 |
ncmm13CurrentPSESThe counter associated with the number of Seconds
having 44 or more Parity Code Violations,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.16 |
ncmm13CurrentCCVThe counter associated with the number of
C-bit Code Violations,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.17 |
ncmm13CurrentCESThe counter associated with the number of
C-bit Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.18 |
ncmm13CurrentCSESThe counter associated with the number of
C-bit Severely Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.19 |
ncmm13CurrentSEFSThe counter associated with the number of seconds
in which one or more Out of Frame occurred
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.20 |
ncmm13CurrentAISSThe counter associated with the number of Seconds
in which one or more incoming AISS was detected
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.21 |
ncmm13CurrentLUASThe counter associated with the number of Seconds
in which one or more incoming LUAS was detected
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.22 |
ncmm13CurrentLOOSThe counter associated with the number of Seconds
the m13 interface was Out Of Service
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.23 |
ncmm13CurrentLOFSThe counter associated with the number of Seconds
Of system Loss Of Signal (LOS) in the current
15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14002.1.24 |
ncmm13IntervalTableThe DS3/E3 Interval table. SEQUENCE OF Ncmm13IntervalEntry .1.3.6.1.4.1.321.1.3037.14003 |
ncmm13IntervalEntryAn entry in the m13 Interval table. Ncmm13IntervalEntry .1.3.6.1.4.1.321.1.3037.14003.1 |
ncmm13IntervalNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3037.14003.1.1 |
ncmm13IntervalIndexThe index value which uniquely identifies the
m13 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmhdmLineIndex object instance.ro INTEGER .1.3.6.1.4.1.321.1.3037.14003.1.2 |
ncmm13IntervalNumberA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes inter-
val (assuming that all 96 intervals are
valid).ro INTEGER .1.3.6.1.4.1.321.1.3037.14003.1.3 |
ncmm13IntervalFarEndCCVThe counter associated with the number of
Far End C-bit Code Violations,
in the previous 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.4 |
ncmm13IntervalFarEndCESThe counter associated with the number of
Far End C-bit Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.5 |
ncmm13IntervalFarEndCSESThe counter associated with the number of
Far End C-bit Severely Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.6 |
ncmm13IntervalFarEndLUASFar End Line Unavailable Seconds. The counter associated
with the number of Seconds the Far End m13 interface
was Out Of Service in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.7 |
ncmm13IntervalLCVThe counter associated with the number of Line
Code Violations, a bipolar or excesive zero violation,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.8 |
ncmm13IntervalLESLine Errored Second Total. The counter associated
with the number of Seconds of in which one or more
LCV occurred in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.9 |
ncmm13IntervalLSESThe counter associated with the number of
Line Severely Errored Seconds (LSES) in
the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.10 |
ncmm13IntervalPCVThe counter associated with the number
of Parity Code Violations (locally calculated P-bits
disagree with those received),
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.11 |
ncmm13IntervalPESThe counter associated with the number of Seconds
having at least one Parity Code Violation,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.12 |
ncmm13IntervalPSESThe counter associated with the number of Seconds
having 44 or more Parity Code Violations,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.13 |
ncmm13IntervalCCVThe counter associated with the number of
C-bit Code Violations,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.14 |
ncmm13IntervalCESThe counter associated with the number of
C-bit Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.15 |
ncmm13IntervalCSESThe counter associated with the number of
C-bit Severely Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.16 |
ncmm13IntervalSEFSThe counter associated with the number of seconds
in which one or more Out of Frame occurred
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.17 |
ncmm13IntervalAISSThe counter associated with the number of Seconds
in which one or more incoming AIS was detected
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.18 |
ncmm13IntervalLUASThe counter associated with the number of Seconds
the m13 interface was Out Of Service
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.19 |
ncmm13IntervalLOSSThe counter associated with the number of Seconds
Of system Loss Of Signal (LOS) in the current
15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.20 |
ncmm13IntervalLOFSThe counter associated with the number of Seconds
Of system Loss Of Frame (LOF) in the current
15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14003.1.21 |
ncmm13TotalTableThe m13 Total table. SEQUENCE OF Ncmm13TotalEntry .1.3.6.1.4.1.321.1.3037.14004 |
ncmm13TotalEntryAn entry in the m13 Total table. Ncmm13TotalEntry .1.3.6.1.4.1.321.1.3037.14004.1 |
ncmm13TotalNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3037.14004.1.1 |
ncmm13TotalIndexThe index value which uniquely identifies the
m13 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmhdmLineIndex object instance.ro INTEGER .1.3.6.1.4.1.321.1.3037.14004.1.2 |
ncmm13TotalCRCStatusCRC4 Status.ro Enumeration .1.3.6.1.4.1.321.1.3037.14004.1.3 |
ncmm13TotalValidIntervThe number of valid intervals.ro INTEGER .1.3.6.1.4.1.321.1.3037.14004.1.4 |
ncmm13TotalFarEndCCVThe counter associated with the number of
Far End C-bit Code Violations,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.5 |
ncmm13TotalFarEndCESThe counter associated with the number of
Far End C-bit Errored Seconds,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.6 |
ncmm13TotalFarEndCSESThe counter associated with the number of
Far End C-bit Severely Errored Seconds,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.7 |
ncmm13TotalFarEndLUASFar End Line Unavailable Seconds. The counter associated
with the number of Seconds the Far End m13 interface
was Out Of Service in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.8 |
ncmm13TotalLCVThe counter associated with the number of Line
Code Violations, a bipolar or excesive zero violation,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.9 |
ncmm13TotalLESLine Errored Second Total. The counter associated
with the number of Seconds of in which one or more
LCV occurred in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.10 |
ncmm13TotalLSESThe counter associated with the number of Seconds
Of Line Severely Errored Seconds (LSES) in the last
24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.11 |
ncmm13TotalPCVThe counter associated with the number
of Parity Code Violations (locally calculated P-bits
disagree with those received),
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.12 |
ncmm13TotalPESThe counter associated with the number of Seconds
having at least one Parity Code Violation,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.13 |
ncmm13TotalPSESThe counter associated with the number of Seconds
having 44 or more Parity Code Violations,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.14 |
ncmm13TotalCCVThe counter associated with the number of
C-bit Code Violations,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.15 |
ncmm13TotalCESThe counter associated with the number of
C-bit Errored Seconds,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.16 |
ncmm13TotalCSESThe counter associated with the number of
C-bit Severely Errored Seconds,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.17 |
ncmm13TotalSEFSThe counter associated with the number of seconds
in which one or more Out of Frame occurred
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.18 |
ncmm13TotalAISSThe counter associated with the number of Seconds
in which one or more incoming AIS was detected
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.19 |
ncmm13TotalLUASThe counter associated with the number of Seconds
the m13 interface was Out Of Service in the last 24
hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.20 |
ncmm13TotalLOSSThe counter associated with the number of Seconds
Of system Loss Of Signal (LOS) in the last
24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.21 |
ncmm13TotalLOFSThe counter associated with the number of Seconds
Of system Loss Of Frame (LOF) in the last
24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3037.14004.1.22 |
ncmm13PerformanceSnapShotTable SEQUENCE OF Ncmm13PerformanceSnapShotEntry .1.3.6.1.4.1.321.1.3037.14005 |
ncmm13PerformanceSnapShotEntryAn entry in the m13 Performance Snap Shot Entry table. Ncmm13PerformanceSnapShotEntry .1.3.6.1.4.1.321.1.3037.14005.1 |
ncmm13SnapShotNIDIndexThe object specifies the node id index of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3037.14005.1.1 |
ncmm13SnapShotIndexThe index value which uniquely identifies the
m13 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a LineIndex
object instance.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3037.14005.1.2 |
ncmm13SnapShotCRCStatusCRC4 Status.ro Enumeration .1.3.6.1.4.1.321.1.3037.14005.1.3 |
ncmm13SnapShotThe variable specifies the option to initiate snap shot
command.rw Enumeration .1.3.6.1.4.1.321.1.3037.14005.1.4 |
ncmm13TimeStampSecThe variable specifies the Time Stamp in Seconds .ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3037.14005.1.5 |
ncmm13TimeStampMilliSecThe variable specifies the Time Stamp in milli Seconds .ro INTEGER .1.3.6.1.4.1.321.1.3037.14005.1.6 |
ncmm13SnapShotSecsThe variable specifies number of seconds in the current interval.ro INTEGER .1.3.6.1.4.1.321.1.3037.14005.1.7 |
ncmm13ResetPerfRegReset Performance Monitoring registers.rw Enumeration .1.3.6.1.4.1.321.1.3037.14005.1.8 |
ncmm13TCAQtrTableThe quarter hour Alert Threshold Table. SEQUENCE OF Ncmm13TCAQtrEntry .1.3.6.1.4.1.321.1.3037.14006 |
ncmm13TCAQtrEntryAn entry in the m13 table. Ncmm13TCAQtrEntry .1.3.6.1.4.1.321.1.3037.14006.1 |
ncmm13TCAQtrNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3037.14006.1.1 |
ncmm13TCAQtrIndexThe index value which uniquely identifies the
alert crossing threshold interface to which
this entry is applicable. The interface
identified by a particular value of this
index is the same interface as identified
by the same value an plcpLineIndex object
instance.ro INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.2 |
ncmm13TCAQtrFarEndCCVThe performance alert threshold for m13
layer Far End C-bit Code Violation in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.3 |
ncmm13TCAQtrFarEndCESThe performance alert threshold for m13
Far End C-bit Errored Seconds,
in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.4 |
ncmm13TCAQtrFarEndCSESThe performance alert threshold for m13
Far End C-bit Severely Errored Seconds,
in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.5 |
ncmm13TCAQtrFarEndLUASThe performance alert threshold for m13 layer
Far End Line Unavailable Seconds in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.6 |
ncmm13TCAQtrLCVThe performance alert threshold for m13
layer Line code Violation in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.7 |
ncmm13TCAQtrLESThe performance alert threshold for m13
layer Line Errored Second in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.8 |
ncmm13TCAQtrLSESThe performance alert threshold for m13
layer Line Severely Errored Second
in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.9 |
ncmm13TCAQtrPCVThe performance alert threshold for m13
layer Parity Code Violation in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.10 |
ncmm13TCAQtrPESThe performance alert threshold for m13
layer Parity Errored Second in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.11 |
ncmm13TCAQtrPSESThe performance alert threshold for m13
layer Parity Severely Errored Second in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.12 |
ncmm13TCAQtrCCVThe performance alert threshold for m13
layer C-bit Code Violation in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.13 |
ncmm13TCAQtrCESThe performance alert threshold for m13
Far End C-bit Errored Seconds,
layer Errored Second in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.14 |
ncmm13TCAQtrCSESThe performance alert threshold for m13
layer C-bit Severely Errored Second in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.15 |
ncmm13TCAQtrSEFSThe performance alert threshold for m13
layer Severely Errored Framing Seconds
in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.16 |
ncmm13TCAQtrAISSThe performance alert threshold for m13
layer Alarm Indication Signal Second
in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.17 |
ncmm13TCAQtrLUASThe performance alert threshold for m13
layer Unavailable Second in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.18 |
ncmm13TCAQtrLOSSThe performance alert threshold for m13
Loss of Signal (LOS) Seconds in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.19 |
ncmm13TCAQtrLOFSThe performance alert threshold for m13
Loss of Frame (LOF) Seconds in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14006.1.20 |
ncmm13TCADayTableThe 24 hour m13 Alert Threshold Table. SEQUENCE OF Ncmm13TCADayEntry .1.3.6.1.4.1.321.1.3037.14007 |
ncmm13TCADayEntryAn entry in the 24 hour m13 Alert Threshold Table. Ncmm13TCADayEntry .1.3.6.1.4.1.321.1.3037.14007.1 |
ncmm13TCADayNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3037.14007.1.1 |
ncmm13TCADayIndexThe index value which uniquely identifies the
alert crossing threshold interface to which
this entry is applicable. The interface
identified by a particular value of this
index is the same interface as identified
by the same value an plcpLineIndex object
instance.ro INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.2 |
ncmm13TCADayFarEndCCVThe performance alert threshold for m13
layer Far End C-bit Code Violation in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.3 |
ncmm13TCADayFarEndCESThe performance alert threshold for m13
Far End C-bit Errored Seconds,
in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.4 |
ncmm13TCADayFarEndCSESThe performance alert threshold for m13
Far End C-bit Severely Errored Seconds,
in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.5 |
ncmm13TCADayFarEndLUASThe performance alert threshold for m13 layer
Far End Line Unavailable Seconds in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.6 |
ncmm13TCADayLCVThe performance alert threshold for m13
layer Line code Violation in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.7 |
ncmm13TCADayLESThe performance alert threshold for m13
layer Line Errored Second in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.8 |
ncmm13TCADayLSESThe performance alert threshold for m13
layer Line Severely Errored Second
in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.9 |
ncmm13TCADayPCVThe performance alert threshold for m13
layer Parity Code Violation in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.10 |
ncmm13TCADayPESThe performance alert threshold for m13
layer Parity Errored Second in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.11 |
ncmm13TCADayPSESThe performance alert threshold form 13
layer Parity Severely Errored Second in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.12 |
ncmm13TCADayCCVThe performance alert threshold for m13
layer C-bit Code Violation in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.13 |
ncmm13TCADayCESThe performance alert threshold for m13
C-bit Errored Seconds, in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.14 |
ncmm13TCADayCSESThe performance alert threshold for DS3
C-bit Severely Errored Seconds, in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.15 |
ncmm13TCADaySEFSThe performance alert threshold for m13
layer Severely Errored Framing Seconds
in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.16 |
ncmm13TCADayAISSThe performance alert threshold for m13
layer Alarm Indication Signal Second
in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.17 |
ncmm13TCADayLUASThe performance alert threshold for m13
layer Unavailable Second in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.18 |
ncmm13TCADayLOSSThe performance alert threshold for m13
Loss of Signal (LOS) Seconds in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.19 |
ncmm13TCADayLOFSThe performance alert threshold for m13
Loss of Frame (LOF) Seconds in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3037.14007.1.20 |
ncmm13TxAlarmTablem13 Transmit alarm Table. SEQUENCE OF Ncmm13TxAlarmEntry .1.3.6.1.4.1.321.1.3037.14008 |
ncmm13TxAlarmEntryAn entry in the m13 Transmit Alarm table. Ncmm13TxAlarmEntry .1.3.6.1.4.1.321.1.3037.14008.1 |
ncmm13TxAlarmNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3037.14008.1.1 |
ncmm13TxAlarmIndexThe index value which uniquely identifies the
Transmit Alarm interface to which
this entry is applicable. The interface
identified by a particular value of this
index is the same interface as identified
by the same value an m13 LineIndex object
instance.ro INTEGER .1.3.6.1.4.1.321.1.3037.14008.1.2 |
ncmm13TxYellowAlarmTransmit the near-end yellow alarm for m13.rw Enumeration .1.3.6.1.4.1.321.1.3037.14008.1.3 |
ncmm13TxAISTransmit the near-end AIS alarm for m13.rw Enumeration .1.3.6.1.4.1.321.1.3037.14008.1.4 |
ncmm13TxIdleSignalTransmit the near-end Idle alarm for m13.rw Enumeration .1.3.6.1.4.1.321.1.3037.14008.1.5 |
ncmm13TxFEBENear end unit transmits the FEBE alarm for m13.rw Enumeration .1.3.6.1.4.1.321.1.3037.14008.1.6 |
ncmm13TxFEACAlarmThis object describes which, if any, FEAC
Alarm is enabled.rw Enumeration .1.3.6.1.4.1.321.1.3037.14008.1.7 |
ncmm13DS3LPBKTableThe m13 DS3 Loopback table. SEQUENCE OF Ncmm13DS3LPBKEntry .1.3.6.1.4.1.321.1.3037.14009 |
ncmm13DS3LPBKEntryAn entry in the m13 Loopback table. Ncmm13DS3LPBKEntry .1.3.6.1.4.1.321.1.3037.14009.1 |
ncmm13DS3LPBKNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3037.14009.1.1 |
ncmm13DS3LPBKIndexThe index value which uniquely identifies the
m13 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmm13LineIndex object instance.ro INTEGER .1.3.6.1.4.1.321.1.3037.14009.1.2 |
ncmm13DS3LPBKActionm13 DS3 Loopback Activation/Deactivation.rw Enumeration .1.3.6.1.4.1.321.1.3037.14009.1.3 |
ncmm13T1LPBKTableThe m13 Loopback table. SEQUENCE OF Ncmm13T1LPBKEntry .1.3.6.1.4.1.321.1.3037.14010 |
ncmm13T1LPBKEntryAn entry in the m13 Loopback table. Ncmm13T1LPBKEntry .1.3.6.1.4.1.321.1.3037.14010.1 |
ncmm13T1LPBKNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3037.14010.1.1 |
ncmm13T1LPBKIndexThe index value which uniquely identifies the
m13 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmm13LineIndex object instance.ro INTEGER .1.3.6.1.4.1.321.1.3037.14010.1.2 |
ncmm13T1LPBKActionm13 Loopback Activate
if Line Type = 0 (DS3 Loopback)
1 No Active
2 Local Loopback
3 Line Loopback
4 FEAC Far End
5 Inband Far End
if Line Type = 1 (T1 Line Command)
6 1-28 T1 Line Loopback
if Line Type = 2(T1 Far End Line)
7 1-28 T1 Far End Loopback
if Line Type = 3(T1 Local Loopback )
8 1-28 T1 Local Loopback
m13 Loopback DeActivate
if Line Type = 0 (DS3 Loopback)
1 No Active
9 Local Loopback
10 Line Loopback
11 FEAC Far End
12 Inband Far End
if Line Type = 1 (T1 Line Command)
13 1-28 T1 Line Loopback
if Line Type = 2(T1 Far End Line)
14 1-28 T1 Far End Loopback
if Line Type = 3(T1 Local Loopback )
15 1-28 T1 Local Loopback.rw Enumeration .1.3.6.1.4.1.321.1.3037.14010.1.3 |
ncmm13T1ConfigTable SEQUENCE OF Ncmm13T1ConfigEntry .1.3.6.1.4.1.321.1.3037.14011 |
ncmm13T1ConfigEntryAn entry in the ncm m13 T1 Configuration table. Ncmm13T1ConfigEntry .1.3.6.1.4.1.321.1.3037.14011.1 |
ncmm13T1ConfigNIDIndexThis object is the identifier of the node id index.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3037.14011.1.1 |
ncmm13T1LineIndexThis object is the identifier of a Inter-
f on a managed device. If there is an ifEn-
try that is directly associated with this and
only this m13 interface, it should have the
same value as ifIndex. Otherwise, the value
exceeds ifNumber, and is a unique identifier
following this rule: inside interfaces (e.g.,
equipment side) with even numbers and outside
interfaces (e.g., network side) with odd
numbers.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3037.14011.1.2 |
ncmm13T1FramingFormatThis variable indicates the variety of
Line implementing this circuit. The type of
circuit affects the number of bits per second
that the circuit can reasonably carry, as well
as the interpretation of the usage and error
statistics. The values, in sequence, describe:
TITLE: SPECIFICATION:
ESF Extended SuperFrame DS1
SF Super Framerw Enumeration .1.3.6.1.4.1.321.1.3037.14011.1.3 |
ncmm13T1LineCodingThis variable describes the variety of Zero
Code Suppression used on the link, which in
turn affects a number of its characteristics.
B8ZS refers to the use of a specified pat-
tern of normal bits and bipolar violations
which are used to replace a sequence of eight
zero bits.
AMI refers to a mode wherein no zero code
suppression is present and the line encoding
does not solve the problem directly. In this
application, the higher layer must provide data
which meets or exceeds the pulse density re-
quirements, such as inverting HDLC data.rw Enumeration .1.3.6.1.4.1.321.1.3037.14011.1.4 |
ncmm13T1EnableNetOnesDensityThe variable specifies the Disable/Enable of the Network
One's Density.rw Enumeration .1.3.6.1.4.1.321.1.3037.14011.1.5 |
ncmm13T1DensityPatternThis variable indicates what type of density network is
being sent on the port or line by the device. The values
mean :
'Disabled' refers to no network ones density exist.
'D80Zeros' refers to send a request for network one's density
of 80 zeroes density pattern.
'D15Zeros' refers to send a request for network one's density
of 15 zeroes density pattern.
'D12d5c80Zero'refers to send a request for 12.5% and 80 zeroes
network one's density pattern.
'TR-62411' refers to sending a request for TR6241
network density pattern.
'Other' refers to sending a network's density pattern
other than those described by this object[pvt]**.rw Enumeration .1.3.6.1.4.1.321.1.3037.14011.1.6 |
ncmm13T1PortServiceThe variable specifies whether port state is in service or
not.rw Enumeration .1.3.6.1.4.1.321.1.3037.14011.1.7 |
ncmm13DS3PortEntryAn entry in the m13 information table. Ncmm13DS3PortEntry .ncmm13DS3PortTable.1 |
ncmm13DS3PortNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .ncmm13DS3PortTable.1.1 |
ncmm13DS3PortIndexThe index value which uniquely identifies the
DS3 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance.ro INTEGER .ncmm13DS3PortTable.1.2 |
ncmm13DS3ModeControlThe Mode Control Bit for M13.rw Enumeration .ncmm13DS3PortTable.1.3 |
ncmm13DS3LineTypeThe Line Type for M13.rw Enumeration .ncmm13DS3PortTable.1.4 |
ncmm13DS3PerfControlPerformance Control Enabled/Disabled for M13.rw Enumeration .ncmm13DS3PortTable.1.5 |
ncmm13DS3AlarmControlAlarm Control Enabled/Disabled for M13.rw Enumeration .ncmm13DS3PortTable.1.6 |
ncmm13DS3FarEndControlFar End Control Enabled/Disabled for M13.rw Enumeration .ncmm13DS3PortTable.1.7 |
ncmm13DS3BusTypeInband Control Enabled/Disabled for M13.rw Enumeration .ncmm13DS3PortTable.1.8 |
ncmm13DS3InbandControlInband Control Enabled/Disabled for M13.rw Enumeration .ncmm13DS3PortTable.1.9 |
ncmm13DS3CableLengthCable length for M13.rw Enumeration .ncmm13DS3PortTable.1.10 |
ncmm13DS3EquipCodeThis is the Far End Equipment Identification code
that describes the specific piece of equipment.
It is sent within the Path
Identification Message.rw DisplayString .ncmm13DS3PortTable.1.11 |
ncmm13DS3LocationIDCodeThis is the Far End Location Identification code
that describes the specific location of the
equipment. It is sent within the Path
Identification Message.rw DisplayString .ncmm13DS3PortTable.1.12 |
ncmm13DS3FrameIDCodeThis is the Far End Frame Identification code
that identifies where the equipment is located
within a building at a given location.
It is sent within the Path Identification Message.rw DisplayString .ncmm13DS3PortTable.1.13 |
ncmm13DS3UnitCodeThis is the Far End code
that identifies the equipment location within a bay.
It is sent within the Path
Identification Message.rw DisplayString .ncmm13DS3PortTable.1.14 |
ncmm13DS3FacilityIDCodeThis code identifies a specific Far End DS3 path.
It is sent within the Path Identification Message.rw DisplayString .ncmm13DS3PortTable.1.15 |
ncmm13DS3PortIdCodePort ID.rw DisplayString .ncmm13DS3PortTable.1.16 |
ncmm13DS3GenIDCodeTest Signal Generator ID.rw DisplayString .ncmm13DS3PortTable.1.17 |