IPADv2-MIB
AI MIB Summary
The IPADv2-MIB module facilitates the monitoring and management of IP Address Allocation and De-allocation (IPAD) events within network infrastructure, specifically tracking the assignment status, lease duration, and utilization of IP address pools via SNMPv2. This module enables administrators to audit dynamic address distribution, detect allocation conflicts, and verify the operational state of DHCP or IPAM services across compliant network devices.
IPADv2.MIB updated for SNMPv2.
Main OID:
ipad.1.3.6.1.4.1.321.100.1
629
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
629 total| Object Name |
|---|
ipadIPADv2.MIB updated for SNMPv2. MODULE-IDENTITY .1.3.6.1.4.1.321.100.1 |
ipadFrPort OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.1 |
ipadFrPortTableTable of frame relay port parameters. SEQUENCE OF IpadFrPortTableEntry .1.3.6.1.4.1.321.100.1.1.1 |
ipadFrPortTableEntryAn entry in the ipad frame relay port table. IpadFrPortTableEntry .1.3.6.1.4.1.321.100.1.1.1.1 |
ipadFrPortServiceIndex into the ipad frame relay port table; an entry in the ipad service table.ro INTEGER .1.3.6.1.4.1.321.100.1.1.1.1.1 |
ipadFrPortActiveSpecifies if the port is active.ro Enumeration .1.3.6.1.4.1.321.100.1.1.1.1.2 |
ipadFrPortLMITypeSpecifies the link management information type used on this port.ro Enumeration .1.3.6.1.4.1.321.100.1.1.1.1.3 |
ipadFrPortLMIModeSpecifies the link management information mode used on this port.ro Enumeration .1.3.6.1.4.1.321.100.1.1.1.1.4 |
ipadFrPortRxInvAlmThresholdSets the rx invalid frames alarm threshold. Setting this field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.1.1.1.5 |
ipadFrPortRxInvAlmAlarmReports if the invalid frames threshold has been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.1.1.1.6 |
ipadFrPortTxAlmThresholdSets the tx throughput alarm threshold (in bits/second). Setting this field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.1.1.1.7 |
ipadFrPortTxAlmAlarmReports if the tx throughput threshold has been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.1.1.1.8 |
ipadFrPortRxAlmThresholdSets the rx throughput alarm threshold (in bits/second). Setting this field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.1.1.1.9 |
ipadFrPortRxAlmAlarmReports if the rx throughput threshold has been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.1.1.1.10 |
ipadFrPortAlarmResetThis is used to clear the current alarm counts.rw Enumeration .1.3.6.1.4.1.321.100.1.1.1.1.11 |
ipadService OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.2 |
ipadServiceTableThe ipad service table. SEQUENCE OF IpadServiceTableEntry .1.3.6.1.4.1.321.100.1.2.1 |
ipadServiceTableEntryAn entry in the ipad service table. IpadServiceTableEntry .1.3.6.1.4.1.321.100.1.2.1.1 |
ipadServiceIndexThe index for the ipad service table.ro INTEGER .1.3.6.1.4.1.321.100.1.2.1.1.1 |
ipadServiceifIndexThe MIB-II ifIndex for this service.rw Enumeration .1.3.6.1.4.1.321.100.1.2.1.1.2 |
ipadServiceTypeThe type of this service.rw Enumeration .1.3.6.1.4.1.321.100.1.2.1.1.3 |
ipadServicePairAn entry in this table, which establishes a service pairing.rw INTEGER .1.3.6.1.4.1.321.100.1.2.1.1.4 |
ipadServiceStatusThis parameter indicates the status of the service. idle - The service is not doing anything or has not been configured for use. down - The physical layer for the service is not ready. training - The physical layer is not ready but is attempting to come up. connecting - The physical layer is not ready but is attempting to come up. physicalUp - The physical layer is ready the service is not ready. protocolUp - The service is able to pass data. dead - The service is inactive because no resources are available to support it. changed - Service parameters were changed and require a save and restart to take effect.ro Enumeration .1.3.6.1.4.1.321.100.1.2.1.1.5 |
ipadServiceAddServiceAdds a row to the Service Table.rw Enumeration .1.3.6.1.4.1.321.100.1.2.2 |
ipadServiceDeleteServiceIdentifies a Service to be deleted; an index into the Service Table.rw INTEGER .1.3.6.1.4.1.321.100.1.2.3 |
ipadChannel OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.3 |
ipadChannelTableThe ipad channel table. SEQUENCE OF IpadChannelTableEntry .1.3.6.1.4.1.321.100.1.3.1 |
ipadChannelTableEntryAn entry in the ipad channel table. IpadChannelTableEntry .1.3.6.1.4.1.321.100.1.3.1.1 |
ipadChannelifIndexPrimary index into ipad channel table, MIB-II ifIndex.ro INTEGER .1.3.6.1.4.1.321.100.1.3.1.1.1 |
ipadChannelIndexChannel index for the physical interface.ro INTEGER .1.3.6.1.4.1.321.100.1.3.1.1.2 |
ipadChannelServiceIndex into service table for this channel.rw INTEGER .1.3.6.1.4.1.321.100.1.3.1.1.3 |
ipadChannelPairPair for this channel; an entry in the channel table. Use service pair in service table to determine which service contains this channel.rw INTEGER .1.3.6.1.4.1.321.100.1.3.1.1.4 |
ipadChannelRateRate for this channel.rw Enumeration .1.3.6.1.4.1.321.100.1.3.1.1.5 |
ipadChannelIdlePatternIdle pattern for this channel.ro INTEGER .1.3.6.1.4.1.321.100.1.3.1.1.6 |
ipadDLCI OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.4 |
ipadDLCITableThe ipad DLCI table. SEQUENCE OF IpadDLCITableEntry .1.3.6.1.4.1.321.100.1.4.1 |
ipadDLCITableEntryAn entry in the ipad DLCI table. IpadDLCITableEntry .1.3.6.1.4.1.321.100.1.4.1.1 |
ipadDLCIserviceAn index into the ipad service table.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.1 |
ipadDLCInumberThe DLCI number for this entry.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.2 |
ipadDLCIactiveSpecifies if the DLCI is active.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.3 |
ipadDLCIcongestionSpecifies if the dlci is receiving frames with FECN or BECN bit set.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.4 |
ipadDLCIremoteRemote DLCI number.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.5 |
ipadDLCIremoteUnitName of the remote DLCI.ro DisplayString( SIZE .1.3.6.1.4.1.321.100.1.4.1.1.6 |
ipadDLCIremoteEquipActiveReports if the equipment attached to the remote unit is active.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.7 |
ipadDLCIencapsulationType of protocol encapsulation used on this DLCI.rw Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.8 |
ipadDLCIproprietaryWhen the encapsulation is proprietary, the traffic type must be configured to gather protocol specific statistics.rw Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.9 |
ipadDLCIpropOffsetWhen the encapsulation is proprietary, this is the number of bytes after the frame relay header to look for the specified protocol decode.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.10 |
ipadDLCIinBandDetermines if frames on this DLCI will be parsed to look for management frames destined for the unit itself.rw Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.11 |
ipadDLCICIRDefault committed information rate in bits per second.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.12 |
ipadDLCIBeDefault excess burst rate in bits per second.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.13 |
ipadDLCIminBCIf the corresponding interface is configured to enable congestion management, the minimum transfer rate at which the unit will throttle back offering data to the network.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.14 |
ipadDLCIrxMonDetermines if the SLA parameters will be monitored for received frames.rw Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.15 |
ipadDLCIdEctrlDetermines if the Rx monitor will set the DE bit on all frames received in excess of the CIR before they are switched to their destination port.rw Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.16 |
ipadDLCIenableDelayEnable or disable delay.rw Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.17 |
ipadDLCItxExCIRThresholdSets the Tx over CIR alarm threshold. This threshold is the number of bits per second in excess of CIR. Setting this field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.18 |
ipadDLCItxExCIRAlarmReports if the Tx over CIR threshold has been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.19 |
ipadDLCItxExBeThresholdSets the Tx over Be alarm threshold. This threshold is the number of bits per second in excess of Be. Setting this field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.20 |
ipadDLCItxExBeAlarmReports if the Tx over Be threshold has been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.21 |
ipadDLCIrxCongThresholdSets the Rx congestion alarm threshold. This threshold is the number of frames received with BECN/FECN. Setting this field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.22 |
ipadDLCIrxCongAlarmReports if the Rx congestion threshold has been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.23 |
ipadDLCIrxBECNinCIRReports if BECN has been received within CIR.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.24 |
ipadDLCIUASThresholdSets the UAS (unavailable seconds) alarm threshold. This threshold is the number of seconds passed that the DLCI is unavailable. Setting this field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.25 |
ipadDLCIUASAlarmReports if the UAS threshold has been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.26 |
ipadDLCIAlarmResetThis is used to clear the current alarm counts.rw Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.27 |
ipadDLCIRoundTripDelaySizeSpecifies the packet size in octets used to calculate round trip delay.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.28 |
ipadDLCIRoundTripDelayRateSpecifies the packet rate in seconds used to calculate round trip delay.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.29 |
ipadDLCIRemoteFramesOfferedWithinCIRCount of frames sent within CIR from the remote end of the DLCI.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.30 |
ipadDLCIRemoteFramesOfferedWithinBECount of frames sent within BE, but over CIR, from the remote end of the DLCI.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.31 |
ipadDLCIFramesReceivedCount of frames received by the local device on this DLCI.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.32 |
ipadDLCIRemoteDataOfferedWithinCIRCount of data octets sent within CIR from the remote end of the DLCI.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.33 |
ipadDLCIRemoteDataOfferedWithinBECount of data octets sent within BE, but over CIR, from the remote end of the DLCI.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.34 |
ipadDLCIDataReceivedCount of data octets received by the local device on this DLCI.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.35 |
ipadDLCIRemoteIPAddressThe IP Address of the device on the remote end of this DLCI. This information is only valid when the remote device supports Verilink's proprietary message exchange.ro IpAddress .1.3.6.1.4.1.321.100.1.4.1.1.36 |
ipadDLCICompressionStatusThis is the current status of the compression engine for this DLCI. disabled(2) indicates that the compression engine is disabled. enabledAndNegotiated(3) indicates that compression is enabled, and has been successfully negotiated with the device at the other end. enabledButNotNegotiated(4) indicated that compression is enabled, but has not been successfully negotiated with the device at the other end. This may be due to the DLCI being down, the other device not having compression enabled or other factors which would inhibit communication.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.37 |
ipadDLCICompressionTxOctetsInThis is a rolling counter of the number of octets given to the compression engine.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.38 |
ipadDLCICompressionTxOctetsOutThis is a rolling counter of the number of octets output from the compression engine.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.39 |
ipadDLCICompressionRxOctetsInThis is a rolling counter of the number of octets given to the compression engine.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.40 |
ipadDLCICompressionRxOctetsOutThis is a rolling counter of the number of octets given to the compression engine.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.41 |
ipadDLCILastChangeTime of the last change in the DLCI table.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.4.2 |
ipadEndpoint OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.5 |
ipadEndpointTableThe ipad endpoint table. SEQUENCE OF IpadEndpointTableEntry .1.3.6.1.4.1.321.100.1.5.1 |
ipadEndpointTableEntryAn entry in the ipad endpoint table. IpadEndpointTableEntry .1.3.6.1.4.1.321.100.1.5.1.1 |
ipadEndpointIndexThe index into the ipad endpoint table.ro INTEGER .1.3.6.1.4.1.321.100.1.5.1.1.1 |
ipadEndpointNameThe name for the endpoint.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.5.1.1.2 |
ipadEndpointServiceAn index into the ipad service table.rw INTEGER .1.3.6.1.4.1.321.100.1.5.1.1.3 |
ipadEndpointDLCInumberData link connection identifier for this endpoint; The DLCI number for this entry.rw INTEGER .1.3.6.1.4.1.321.100.1.5.1.1.4 |
ipadEndpointTypeEndpoint type.rw Enumeration .1.3.6.1.4.1.321.100.1.5.1.1.5 |
ipadEndpointForwardIndex into the endpoint names table. This is the endpoint on which data should be forwarded for switched endpoints.rw INTEGER .1.3.6.1.4.1.321.100.1.5.1.1.6 |
ipadEndpointBackupIndex into the endpoint table. This is the endpoint on which data should be forwarded in the case where the endpoint becomes inactive.rw INTEGER .1.3.6.1.4.1.321.100.1.5.1.1.7 |
ipadEndpointRefSLPIndex into the endpoint table. The service level parameters can be copied from another configured endpoint.rw INTEGER .1.3.6.1.4.1.321.100.1.5.1.1.8 |
ipadEndpointRemoteIpAddrIP address for remote.rw IpAddress .1.3.6.1.4.1.321.100.1.5.1.1.9 |
ipadEndpointRemoteIpMaskIP address mask for remote.rw IpAddress .1.3.6.1.4.1.321.100.1.5.1.1.10 |
ipadEndpointAddEndpointIdentifies an Endpoint to be added.rw DisplayString( SIZE .1.3.6.1.4.1.321.100.1.5.2 |
ipadEndpointDeleteEndpointIdentifies an Endpoint to be deleted.rw DisplayString( SIZE .1.3.6.1.4.1.321.100.1.5.3 |
ipadEndpointLastChangeTime of the last change in the Endpoint table.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.5.4 |
ipadUser OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.6 |
ipadUserTableTable of user selected parameters. SEQUENCE OF IpadUserTableEntry .1.3.6.1.4.1.321.100.1.6.1 |
ipadUserTableEntryAn entry in the ipad user table. IpadUserTableEntry .1.3.6.1.4.1.321.100.1.6.1.1 |
ipadUserIndexIndex into the ipad user table.ro INTEGER .1.3.6.1.4.1.321.100.1.6.1.1.1 |
ipadUserFilterByDLCIEnables Service+DLCI filtering for this user statistic.rw Enumeration .1.3.6.1.4.1.321.100.1.6.1.1.2 |
ipadUserServiceSpecifies the service for this user type; identifies an entry in the ipad DLCI table when combined with ipadUserDLCI. Meaningful when ipadUserFilterByDLCI is enabled. Meaningless when collecting PPP statistics.rw INTEGER .1.3.6.1.4.1.321.100.1.6.1.1.3 |
ipadUserDLCISpecifies the DLCI for this user type; identifies an entry in the ipad DLCI table when combined with ipadUserService. Meaningful when ipadUserFilterByDLCI is enabled. Meaningless when collecting PPP statistics.rw INTEGER .1.3.6.1.4.1.321.100.1.6.1.1.4 |
ipadUserFilterByIPAddressEnables IP address filtering for this user statistic. A packet is counted towards the user statistics if the result of a bitwise-and of an IP address in a transmitted packet with ipadUserIPMask equals ipadUserIPAddress.rw Enumeration .1.3.6.1.4.1.321.100.1.6.1.1.5 |
ipadUserIPAddressSpecifies the IP address for this user type.rw IpAddress .1.3.6.1.4.1.321.100.1.6.1.1.6 |
ipadUserIPMaskSpecifies the IP address mask for this user type.rw IpAddress .1.3.6.1.4.1.321.100.1.6.1.1.7 |
ipadUserFilterByIPPortEnables IP Port filtering for this user statistic.rw Enumeration .1.3.6.1.4.1.321.100.1.6.1.1.8 |
ipadUserIPPortSpecifies the IP port for this user type.rw Enumeration .1.3.6.1.4.1.321.100.1.6.1.1.9 |
ipadUserTxAlmThresholdSets the tx throughput alarm threshold in bits per second. Setting this field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.6.1.1.10 |
ipadUserTxAlmAlarmReports if the tx throughput threshold has been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.6.1.1.11 |
ipadUserAlarmResetThis is used to clear the current alarm counts.rw Enumeration .1.3.6.1.4.1.321.100.1.6.1.1.12 |
ipadUserVpiSpecifies the Vpi for this user type; identifies a VC when combined with the ipadUserService and ipadUserVci objects. Meaningful when ipadUserFilterByVpiVci is enabled. Meaningless when collecting PPP or Frame Relay statistics.rw INTEGER .1.3.6.1.4.1.321.100.1.6.1.1.13 |
ipadUserVciSpecifies the Vci for this user type; identifies a VC when combined with the ipadUserService and ipadUserVpi objects. Meaningful when ipadUserFilterByVpiVci is enabled. Meaningless when collecting PPP or Frame Relay statistics.rw INTEGER .1.3.6.1.4.1.321.100.1.6.1.1.14 |
ipadUserFilterByVpiVciEnables Vpi/Vci filtering for this user statistic. A packet is counted towards the user statistics if the packet is transmitted on the service/Vpi/Vci combindation specified by ipadUserService, ipadUserVpi, and ipadUserVci.rw Enumeration .1.3.6.1.4.1.321.100.1.6.1.1.15 |
ipadUserIPStatTimeRemainingSpecifies seconds until the next IP TopN report is generated.rw INTEGER .1.3.6.1.4.1.321.100.1.6.2 |
ipadUserIPStatTimeDurationThe value of TimeRemaining when TimeRemaining was last set. Indicates the number of seconds that the next IP TopN report will cover.ro INTEGER .1.3.6.1.4.1.321.100.1.6.3 |
ipadUserIPStatStartTimeThe value of SysUpTime when TimeRemaining was last set.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.6.4 |
ipadUserIPStatRequestedReportSizeDetermines the requested maximum number of entries in the topN report.rw INTEGER .1.3.6.1.4.1.321.100.1.6.5 |
ipadUserIPStatGrantedReportSizeDetermines the granted number of entries in the topN report. This is by definition less than or equal to requested report size.ro INTEGER .1.3.6.1.4.1.321.100.1.6.6 |
ipadUserIPStatReportNumberSpecifies the number of reports that have been generated. This value resets to zero when the unit is restarted.ro INTEGER .1.3.6.1.4.1.321.100.1.6.7 |
ipadUserIPStatDiscardTypeThe internal table used to track TopN statistics is finite in size. On the condition when the internal table is full and a new IP address is encountered, an element already existing in the table must be removed. This variable determines the manner of selection. Writing byTime(1) will cause the entry with the least recent frame to be discarded. That is, all other entries in the table will have transmitted or received at least one packet more recently. Writing byFrames(2) will select the entry with the fewest transmitted or received frames. Writing byOctets(3) will select the entry with the fewest transmitted or received octets. The default is byTime(1).rw Enumeration .1.3.6.1.4.1.321.100.1.6.8 |
ipadPPP OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.7 |
ipadPPPCfgTableThe ipad PPP configuration table. SEQUENCE OF IpadPPPCfgTableEntry .1.3.6.1.4.1.321.100.1.7.1 |
ipadPPPCfgTableEntryAn entry in the ipad PPP configuration table. IpadPPPCfgTableEntry .1.3.6.1.4.1.321.100.1.7.1.1 |
ipadPPPCfgServiceThe index into the PPP configuration table; an entry in the ipad service table.ro INTEGER .1.3.6.1.4.1.321.100.1.7.1.1.1 |
ipadPPPCfgDialModeDetermines the permancency of a communications connection.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.2 |
ipadPPPCfgInactivityTimerDetermines when a dial-up or demand-dial connection will be disconnected due to inactivity in both directions. When this parameter is set to zero then the timer is disabled.rw INTEGER .1.3.6.1.4.1.321.100.1.7.1.1.3 |
ipadPPPCfgNegotiationInitDetermines if the port waits for the other end to initiate parameter negotiations.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.4 |
ipadPPPCfgMRUThe maximum receive unit the interface will accept. Valid values are in the range 128 - 4096, default is 1500.rw INTEGER .1.3.6.1.4.1.321.100.1.7.1.1.5 |
ipadPPPCfgACCMSets the async control character map used when generating async HDLC frames. Setting a bit in the map causes the corresponding character to be mapped for transparency.rw INTEGER .1.3.6.1.4.1.321.100.1.7.1.1.6 |
ipadPPPCfgNegMRUDetermines if MRU size is negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.7 |
ipadPPPCfgNegACCMDetermines if ACCM is negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.8 |
ipadPPPCfgNegMagicDetermines if the magic number is negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.9 |
ipadPPPCfgNegCompressionDetermines if the PPP protocol header compression is negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.10 |
ipadPPPCfgNegAddressDetermines if the PPP HDLC header compression is negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.11 |
ipadPPPCfgNegPAPDetermines if PAP is negotiated with the peer when a more secure authentication protocol is rejected.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.12 |
ipadPPPCfgNegCHAPDetermines if CHAP is negotiated with the peer when a more secure authentication protocol is rejected.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.13 |
ipadPPPCfgAllowPAPDetermines if PAP is allowed to be negotiated by the peer.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.14 |
ipadPPPCfgAllowCHAPDetermines if CHAP is allowed to be negotiated by the peer.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.15 |
ipadPPPCfgPAPUsernameIdentification string to determine the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.1.1.16 |
ipadPPPCfgPAPPasswordPassword string to validate the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.1.1.17 |
ipadPPPCfgCHAPUsernameIdentification string to determine the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.1.1.18 |
ipadPPPCfgCHAPSecretPassword string to validate the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.1.1.19 |
ipadPPPCfgPortIpAddressSets the IP address of the unit's port.rw IpAddress .1.3.6.1.4.1.321.100.1.7.1.1.20 |
ipadPPPCfgPeerIpAddressSets the IP address of the unit's peer.rw IpAddress .1.3.6.1.4.1.321.100.1.7.1.1.21 |
ipadPPPCfgNegIpAddressDetermines if IP addresses are dynamically negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.22 |
ipadPPPCfgNegIPCPCompressionDetermines if Van Jacobson TCPIP header compression is negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.23 |
ipadPPPCfgSubnetMaskSpecifies the subnet mask.rw IpAddress .1.3.6.1.4.1.321.100.1.7.1.1.24 |
ipadPPPCfgAuthChallengeIntervalSpecifies the authentication challenge interval.rw INTEGER .1.3.6.1.4.1.321.100.1.7.1.1.25 |
ipadPPPCfgEndpointEndpoint name to run PPP over another protocol.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.1.1.26 |
ipadPPPCfgNegIpMaskDetermines if the subnet Mask is negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.27 |
ipadPPPCfgNegDNSAddressDetermines if the DNS address is negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.28 |
ipadPPPPAPTableTable of PAP authentication parameters. SEQUENCE OF IpadPPPPAPTableEntry .1.3.6.1.4.1.321.100.1.7.2 |
ipadPPPPAPTableEntryAn entry in the ipad PPP PAP table. IpadPPPPAPTableEntry .1.3.6.1.4.1.321.100.1.7.2.1 |
ipadPPPPAPTableIndexThe index into the PPP PAP association table.ro INTEGER .1.3.6.1.4.1.321.100.1.7.2.1.1 |
ipadPPPPAPTableUsernameIdentification string to identify the user.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.2.1.2 |
ipadPPPPAPTablePasswordPassword string to validate the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.2.1.3 |
ipadPPPCHAPTableTable of CHAP authentication parameters. SEQUENCE OF IpadPPPCHAPTableEntry .1.3.6.1.4.1.321.100.1.7.3 |
ipadPPPCHAPTableEntryAn entry in the ipad PPP CHAP table. IpadPPPCHAPTableEntry .1.3.6.1.4.1.321.100.1.7.3.1 |
ipadPPPCHAPTableIndexThe index into the PPP CHAP association table.ro INTEGER .1.3.6.1.4.1.321.100.1.7.3.1.1 |
ipadPPPCHAPTableUsernameIdentification string to identify the user.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.3.1.2 |
ipadPPPCHAPTableSecretPassword string to validate the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.3.1.3 |
ipadModem OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.8 |
ipadModemDialTableTable of modem dialing parameters. SEQUENCE OF IpadModemDialTableEntry .1.3.6.1.4.1.321.100.1.8.1 |
ipadModemDialTableEntryAn entry in the ipad modem dialing parameters table. IpadModemDialTableEntry .1.3.6.1.4.1.321.100.1.8.1.1 |
ipadModemDialTableIndexThe index into the ipad modem dialing parameters table. Equivalent to MIB-II ifIndex.ro INTEGER .1.3.6.1.4.1.321.100.1.8.1.1.1 |
ipadModemDialDataIndexAn index into the Modem Data Table, which selects a modem.rw INTEGER .1.3.6.1.4.1.321.100.1.8.1.1.2 |
ipadModemDialNumberSpecifies the telephone number to dial.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.1.1.3 |
ipadModemDialAbortTimerAborts a connection attempt if a dial-up connection has failed to connect within the specified number of seconds. Range is 1..255.rw INTEGER .1.3.6.1.4.1.321.100.1.8.1.1.4 |
ipadModemDialRedialAttemptsDetermines how many attempts to initiate a dial-up connection after the initial failure. Range is 0..10.rw INTEGER .1.3.6.1.4.1.321.100.1.8.1.1.5 |
ipadModemDialDelayBeforeRedialSpecifies the number of seconds to wait before redialing. Range is 1..255.rw INTEGER .1.3.6.1.4.1.321.100.1.8.1.1.6 |
ipadModemDialLoginScriptScript string interpreted after an originated dial-up connection is first established.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.1.1.7 |
ipadModemDialUsernameIdentification string to determine the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.1.1.8 |
ipadModemDialPasswordPassword string to validate the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.1.1.9 |
ipadModemDialChallengeScriptScript string interpreted after an answered dial-up connection is first established.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.1.1.10 |
ipadModemDialAnswerRingsAnswers an incoming call on the given number of rings. A value of zero disables answering. Range is 0..255.rw INTEGER .1.3.6.1.4.1.321.100.1.8.1.1.11 |
ipadModemDialCommandThe set values perform the following actions: setupNow - Execute the modem setup scripts dialNow - Initiate dialing procedures answerNow - Initiate answering procedures disconnectNow - Initiate disconnect proceduresrw Enumeration .1.3.6.1.4.1.321.100.1.8.1.1.12 |
ipadModemDialStatusThis object reports the current activity of the modem control feature disabled - The feature is not enabled setup - The feature is configuring the modem error - The feature could not setup the modem idle - The feature is ready to operate dialing - The feature is placing a call dialWait - The feature is between call attempts ringing - The feature is waiting for an incoming call to connect or go away answering - The feature is answering a call negotiating - The feature is negotiating the login security online - The feature data path is connected disconnecting - The feature is disconnecting a call awaitingCallback - The feature is waiting for a security callbackro Enumeration .1.3.6.1.4.1.321.100.1.8.1.1.13 |
ipadModemDialSecuritydisable - Dial-up security not enabled password - Challenge/Login password scripts used callback - Password security followed by answerer calling back callbackVerify - Callback and verify using the callback challenge/response scriptsrw Enumeration .1.3.6.1.4.1.321.100.1.8.1.1.14 |
ipadModemDialCallbackRedialDelaySpecifies the number of seconds to wait before redialing. Range is 1..255.rw INTEGER .1.3.6.1.4.1.321.100.1.8.1.1.15 |
ipadModemDialCallbackTimeoutThis object sets the number of seconds to wait for a security callback before failing the connection attempt.rw INTEGER .1.3.6.1.4.1.321.100.1.8.1.1.16 |
ipadModemDialCallbackChalScriptCallback security challenge script interpreted after originating a callback dial-up connection.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.1.1.17 |
ipadModemDialCallbackRspScriptCallback security challenge response script interpreted after answering a callback dial-up connection.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.1.1.18 |
ipadModemDataTableTable of modem database parameters. SEQUENCE OF IpadModemDataTableEntry .1.3.6.1.4.1.321.100.1.8.2 |
ipadModemDataTableEntryAn entry in the ipad modem database parameters table. IpadModemDataTableEntry .1.3.6.1.4.1.321.100.1.8.2.1 |
ipadModemDataTableIndexThe index into the ipad modem database parameters table.ro INTEGER .1.3.6.1.4.1.321.100.1.8.2.1.1 |
ipadModemDataModemNameIdentification string for the modem database.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.2 |
ipadModemDataSetupScriptFirst script interpreted when a modem port is initialized.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.3 |
ipadModemDataDialingScriptScript interpreted when a dial-up connection is initiated.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.4 |
ipadModemDataAnswerScriptScript interpreted when a modem port decides to answer an incoming call.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.5 |
ipadModemDataHangupScriptScript interpreted when a dial-up connection is no longer needed.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.6 |
ipadModemDataSyncScriptScript interpreted to configure the modem to pass synchronous data.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.7 |
ipadModemDataSyncMethodThis object specifies how synchronous user data is passed to the modem. none - The modem does not support synchronous user data. sync - The modem directly supports synchronous user data. v80 - Synchronous user data is exchanged using ITU-T V.80 procedures without CRC. v80crc - Synchronous user data is exchanged using ITU-T V.80 procedures with CRC. rfc1662 - Synchronous user data is exchanged using the method described by RFC1662.rw Enumeration .1.3.6.1.4.1.321.100.1.8.2.1.8 |
ipadModemDataSetupScript2Second script interpreted when a modem port is initialized.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.9 |
ipadModemDataSetupScript3Third script interpreted when a modem port is initialized.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.10 |
ipadModemDataSetupScript4Fourth script interpreted when a modem port is initialized.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.11 |
ipadModemDataSetupScript5Fifth script interpreted when a modem port is initialized.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.12 |
ipadDbuTableThe Dial Backup configuration table. SEQUENCE OF IpadDbuTableEntry .1.3.6.1.4.1.321.100.1.8.3 |
ipadDbuTableEntryAn entry in the Dial Backup configuration table. IpadDbuTableEntry .1.3.6.1.4.1.321.100.1.8.3.1 |
ipadDbuIndexAn index into the Dial Backup configuration table. Equivalent to MIB-II ifIndex.ro INTEGER .1.3.6.1.4.1.321.100.1.8.3.1.1 |
ipadDbuOperationThis object specifes the basic operation of the Dial Backup feature. disable - Dial Backup is not to operate automatic - Dial Backup will start and end automatically automaticDaily - Dial Backup will operate automatically within the specified times in the Daily Dial Backup Table forceBackup - The unit will operate in backup mode unconditionally testOriginate - The unit will start backup procedures and hold the dial-up connection testAnswer - The unit will await a call, establish, and hold the dial-up connectionrw Enumeration .1.3.6.1.4.1.321.100.1.8.3.1.2 |
ipadDbuMonitoredifIndexNetwork MIB-II ifIndex monitored by Dial Backup.rw INTEGER .1.3.6.1.4.1.321.100.1.8.3.1.7 |
ipadDbuActivator1This object specifies what will trigger a dial backup activation. disable - No alarm will trigger any - Trigger on any active alarm listed here carrier - Trigger on LOS, OOF, or OOS alarms es - Trigger on the Errored Seconds alarm ses - Trigger on the Severely Errored Seconds alarm uas - Trigger on the Unavailable Seconds alarm los - Trigger on the Loss Of Signal alarm cs - Trigger on the Controlled Slip alarm bpv - Trigger on the Bipolar Violation alarm oof - Trigger on the Out Of Frame alarm ais - Trigger on the Alarm Indication Signal alarm ras - Trigger on the Remote Alarm Signal alarm oos - Trigger on the Out Of Service alarmrw Enumeration .1.3.6.1.4.1.321.100.1.8.3.1.8 |
ipadDbuActivator2This object specifies what will trigger a dial backup activation. disable - No alarm will trigger any - Trigger on any active alarm listed here carrier - Trigger on LOS, OOF, or OOS alarms es - Trigger on the Errored Seconds alarm ses - Trigger on the Severely Errored Seconds alarm uas - Trigger on the Unavailable Seconds alarm los - Trigger on the Loss Of Signal alarm cs - Trigger on the Controlled Slip alarm bpv - Trigger on the Bipolar Violation alarm oof - Trigger on the Out Of Frame alarm ais - Trigger on the Alarm Indication Signal alarm ras - Trigger on the Remote Alarm Signal alarm oos - Trigger on the Out Of Service alarmrw Enumeration .1.3.6.1.4.1.321.100.1.8.3.1.9 |
ipadDbuRevertDelayThis object specifies the number of seconds the dial backup activators must be continuously gone before the normal connection is restored.rw INTEGER .1.3.6.1.4.1.321.100.1.8.3.1.10 |
ipadDbuTrapDelayThis object specifies the number of seconds after entering the active state before sending the Dial Backup trap.rw INTEGER .1.3.6.1.4.1.321.100.1.8.3.1.11 |
ipadDbuStatusThis object reports the current activity of the Dial Backup feature disabled - The feature is not enabled setup - The feature is configuring the modem error - The feature could not setup the modem standby - The feature is ready to operate disallowed - The Dial Backup Daily table prevents activation dialing - The feature is placing a call dialWait - The feature is between call attempts ringing - The feature is waiting for an incoming call to connect or go away answering - The feature is answering a call negotiating - The feature is negotiating the login security awaitingCallback - The feature is waiting for a security callback active - The feature backup path is connected disconnecting - The feature is disconnecting a call testWaiting - The feature is waiting for a link test call testPassed - The feature has successfully tested the backup link testFailed - The feature could not establish the backup linkro Enumeration .1.3.6.1.4.1.321.100.1.8.3.1.12 |
ipadDbuTrapEnable or disable the Dial Backup trap.rw Enumeration .1.3.6.1.4.1.321.100.1.8.3.1.13 |
ipadDbuDailyTableThe Daily Dial Backup Times Table. SEQUENCE OF IpadDbuDailyTableEntry .1.3.6.1.4.1.321.100.1.8.4 |
ipadDbuDailyTableEntryAn entry in the Daily Dial Backup Times Table. IpadDbuDailyTableEntry .1.3.6.1.4.1.321.100.1.8.4.1 |
ipadDbuDailyIndexAn index into the Daily Dial Backup Times Table. Equivalent to MIB-II ifIndex.ro INTEGER .1.3.6.1.4.1.321.100.1.8.4.1.1 |
ipadDbuDailyDayOfWeekThis is the day of the week index into the Daily Dial Backup Times Table.ro Enumeration .1.3.6.1.4.1.321.100.1.8.4.1.2 |
ipadDbuDailyStartThis object is the beginning of a window for Dial Backup activation.rw Enumeration .1.3.6.1.4.1.321.100.1.8.4.1.3 |
ipadDbuDailyLengthThis object is the size of a window for Dial Backup activation.rw Enumeration .1.3.6.1.4.1.321.100.1.8.4.1.4 |
ipadSvcAware OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.9 |
ipadFrPortStatsTablePort statistics. SEQUENCE OF IpadFrPortStatsEntry .1.3.6.1.4.1.321.100.1.9.1 |
ipadFrPortStatsEntryAn entry in the service aware ports statistics table. IpadFrPortStatsEntry .1.3.6.1.4.1.321.100.1.9.1.1 |
ipadFrPortStatsServicePort index in the ipadFrPortStats table; an entry in the ipad service table.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.1 |
ipadFrPortStatsPeriodThe index into the port stats 24-hour table.ro Enumeration .1.3.6.1.4.1.321.100.1.9.1.1.2 |
ipadFrPortStatsTxFramesNumber of transmitted frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.3 |
ipadFrPortStatsRxFramesNumber of received frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.4 |
ipadFrPortStatsTxOctetsNumber of transmitted octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.5 |
ipadFrPortStatsRxOctetsNumber of received octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.6 |
ipadFrPortStatsTxMgmtFramesNumber of transmitted management frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.7 |
ipadFrPortStatsRxMgmtFramesNumber of received management frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.8 |
ipadFrPortStatsTxMgmtOctetsNumber of transmitted management octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.9 |
ipadFrPortStatsRxMgmtOctetsNumber of received management octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.10 |
ipadFrPortStatsRxFECNNumber of received frames with FECN set for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.11 |
ipadFrPortStatsRxBECNNumber of received frames with BECN set for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.12 |
ipadFrPortStatsRxInvalidNumber of invalid received frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.13 |
ipadFrPortStatsTxStatInqNumber of transmitted status inquiry frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.14 |
ipadFrPortStatsRxStatInqNumber of received status inquiry frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.15 |
ipadFrPortStatsTxStatRespNumber of transmitted status response frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.16 |
ipadFrPortStatsRxStatRespNumber of received status response frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.17 |
ipadFrPortStatsRxInvLMINumber of received frames with an invalid LMI for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.18 |
ipadFrPortStatsPeakPeak throughput rate for the period (in bits/second).ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.19 |
ipadFrPortStatsAverageAverage throughput rate for the period (in bits/second).ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.20 |
ipadFrPortStatsTimeStampThe value of sysUpTime the last time the statistics were updated.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.9.1.1.21 |
ipadFrPortStatsTxAvgPercentAverage Tx throughput percent for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.22 |
ipadFrPortStatsTxMaxPercentMaximum Tx throughput percent for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.23 |
ipadFrPortStatsTxInstantPercentInstantaneous Tx throughput percent for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.24 |
ipadFrPortStatsTx20PercentSecNumber of seconds Tx throughput was 0-20% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.25 |
ipadFrPortStatsTx40PercentSecNumber of seconds Tx throughput was 21-40% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.26 |
ipadFrPortStatsTx60PercentSecNumber of seconds Tx throughput was 41-60% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.27 |
ipadFrPortStatsTx80PercentSecNumber of seconds Tx throughput was 61-80% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.28 |
ipadFrPortStatsTx100PercentSecNumber of seconds Tx throughput was 81-100% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.29 |
ipadFrPortStatsRxAvgPercentAverage Rx throughput percent for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.30 |
ipadFrPortStatsRxMaxPercentMaximum Rx throughput percent for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.31 |
ipadFrPortStatsRxInstantPercentInstantaneous Rx throughput percent for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.32 |
ipadFrPortStatsRx20PercentSecNumber of seconds Rx throughput was 0-20% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.33 |
ipadFrPortStatsRx40PercentSecNumber of seconds Rx throughput was 21-40% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.34 |
ipadFrPortStatsRx60PercentSecNumber of seconds Rx throughput was 41-60% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.35 |
ipadFrPortStatsRx80PercentSecNumber of seconds Rx throughput was 61-80% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.36 |
ipadFrPortStatsRx100PercentSecNumber of seconds Rx throughput was 81-100% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.37 |
ipadFrPortStatsValidIntervalsNumber of valid intervals in the table excluding the Summary and Current entries.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.38 |
ipadDLCIstatsTablePort statistics. SEQUENCE OF IpadDLCIstatsEntry .1.3.6.1.4.1.321.100.1.9.2 |
ipadDLCIstatsEntryAn entry in the service aware DLCI statistics table. IpadDLCIstatsEntry .1.3.6.1.4.1.321.100.1.9.2.1 |
ipadDLCIstatsServiceThe service index for the service aware stats table; identifies an entry in the ipad DLCI table when combined with ipadDLCIstatsDLCI.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.1 |
ipadDLCIstatsDLCIThe DLCI index for the service aware stats table; identifies an entry in the ipad DLCI table when combined with ipadDLCIstatsService.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.2 |
ipadDLCIstatsPeriodThe index into the DLCI stats 24-hour table.ro Enumeration .1.3.6.1.4.1.321.100.1.9.2.1.3 |
ipadDLCIstatsTxFramesThe number of transmitted frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.4 |
ipadDLCIstatsRxFramesThe number of received frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.5 |
ipadDLCIstatsTxOctetsThe number of transmitted octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.6 |
ipadDLCIstatsRxOctetsThe number of received octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.7 |
ipadDLCIstatsRxFECNThe number of received frames with FECN set for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.8 |
ipadDLCIstatsRxBECNThe number of received frames with BECN set for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.9 |
ipadDLCIstatsRxDEThe number of received frames with DE bit set for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.10 |
ipadDLCIstatsTxExcessCIRThe number of transmitted octets in excess of CIR for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.11 |
ipadDLCIstatsTxExcessBeThe number of transmitted octets in excess of Be for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.12 |
ipadDLCIstatsTxMgmtFramesThe number of transmitted management frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.13 |
ipadDLCIstatsRxMgmtFramesThe number of received management frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.14 |
ipadDLCIstatsTxMgmtOctetsThe number of transmitted management octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.15 |
ipadDLCIstatsRxMgmtOctetsThe number of received management octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.16 |
ipadDLCIstatsPeakPeak throughput rate for the period (in bits/second).ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.17 |
ipadDLCIstatsAverageAverage throughput rate for the period (in bits/second).ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.18 |
ipadDLCIstatsDelayPeakPeak roundtrip delay for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.19 |
ipadDLCIstatsDelayAverageAverage roundtrip delay for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.20 |
ipadDLCIstatsRoundTripTimeoutsNumber of timeouts on roundtrip delay for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.21 |
ipadDLCIstatsUASNumber of seconds the DLCI is unavailable.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.22 |
ipadDLCIstatsFdrCirro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.23 |
ipadDLCIstatsDdrCirro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.24 |
ipadDLCIstatsFdrBero INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.25 |
ipadDLCIstatsDdrBero INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.26 |
ipadDLCIstatsTimeStampThe value of sysUpTime the last time the statistics were updated.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.9.2.1.27 |
ipadDLCIstatsRemoteFramesOfferedWithinCIRCount of frames sent within CIR from the remote end of the DLCI.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.28 |
ipadDLCIstatsRemoteFramesOfferedWithinBECount of frames sent within BE, but over CIR, from the remote end of the DLCI.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.29 |
ipadDLCIstatsFramesReceivedCount of frames received by the local device on this DLCI.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.30 |
ipadDLCIstatsFDRCIRFrame Delivery Ratio calculated within CIR.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.100.1.9.2.1.31 |
ipadDLCIstatsFDRBEFrame Delivery Ratio caclulated within BE.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.100.1.9.2.1.32 |
ipadDLCIstatsRemoteDataOfferedWithinCIRCount of data octets sent within CIR from the remote end of the DLCI.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.33 |
ipadDLCIstatsRemoteDataOfferedWithinBECount of data octets sent within BE, but over CIR, from the remote end of the DLCI.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.34 |
ipadDLCIstatsDataReceivedCount of data octets received by the local device on this DLCI.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.35 |
ipadDLCIstatsDDRCIRData Delivery Ratio calculated within CIR.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.100.1.9.2.1.36 |
ipadDLCIstatsDDRBEData Delivery Ratio caclulated within BE.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.100.1.9.2.1.37 |
ipadDLCIstatsAvgPercentAverage throughput percent for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.38 |
ipadDLCIstatsMaxPercentMaximum throughput percent for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.39 |
ipadDLCIstatsInstantPercentInstantaneous throughput percent for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.40 |
ipadDLCIstats20PercentSecNumber of seconds throughput was 0-20% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.41 |
ipadDLCIstats40PercentSecNumber of seconds throughput was 21-40% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.42 |
ipadDLCIstats60PercentSecNumber of seconds throughput was 41-60% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.43 |
ipadDLCIstats80PercentSecNumber of seconds throughput was 61-80% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.44 |
ipadDLCIstats100PercentSecNumber of seconds throughput was 81-100% of bandwidth.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.45 |
ipadDLCIstatsValidIntervalsNumber of valid intervals in the table excluding the Summary and Current entries.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.46 |
ipadDLCIstatsCompressionTxOctetsInNumber of octets passed into the compression engine.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.47 |
ipadDLCIstatsCompressionTxOctetsOutNumber of octets passed out of the compression engine.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.48 |
ipadDLCIstatsCompressionRxOctetsInNumber of octets passed into the compression engine.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.49 |
ipadDLCIstatsCompressionRxOctetsOutNumber of octets passed out of the compression engine.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.50 |
ipadDLCIstatsCompressionTxRatioCompression Ratio calculated in the transmit direction.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.100.1.9.2.1.51 |
ipadDLCIstatsCompressionRxRatioCompression Ratio calculation in the receive direction.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.100.1.9.2.1.52 |
ipadUserStatsTableUser-selected protocol statistics. SEQUENCE OF IpadUserStatsEntry .1.3.6.1.4.1.321.100.1.9.3 |
ipadUserStatsEntryAn entry in the user statistics table. IpadUserStatsEntry .1.3.6.1.4.1.321.100.1.9.3.1 |
ipadUserStatsIndexIndex into the user statistics table.ro INTEGER .1.3.6.1.4.1.321.100.1.9.3.1.1 |
ipadUserStatsPeriodThe index into the user stats 24-hour table.ro Enumeration .1.3.6.1.4.1.321.100.1.9.3.1.2 |
ipadUserStatsTxFramesNumber of transmitted frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.3.1.3 |
ipadUserStatsRxFramesNumber of received frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.3.1.4 |
ipadUserStatsTxOctetsNumber of transmitted octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.3.1.5 |
ipadUserStatsRxOctetsNumber of received octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.3.1.6 |
ipadUserStatsTxRatePeakPeak throughput rate for the period (in bits/second).ro INTEGER .1.3.6.1.4.1.321.100.1.9.3.1.7 |
ipadUserStatsTxRateAverageAverage throughput rate for the period (in bits/second).ro INTEGER .1.3.6.1.4.1.321.100.1.9.3.1.8 |
ipadUserStatsTimeStampThe value of sysUpTime the last time the statistics were updated.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.9.3.1.9 |
ipadIPTopNStatsTableIP TopN statistics. SEQUENCE OF IpadIPTopNStatsEntry .1.3.6.1.4.1.321.100.1.9.4 |
ipadIPTopNStatsEntryAn entry in the user statistics table. IpadIPTopNStatsEntry .1.3.6.1.4.1.321.100.1.9.4.1 |
ipadIPTopNStatsIndexIndex into the IP TopN statistics table.ro INTEGER .1.3.6.1.4.1.321.100.1.9.4.1.1 |
ipadIPTopNStatsAddressIP address of this entry.ro OCTET STRING .1.3.6.1.4.1.321.100.1.9.4.1.2 |
ipadIPTopNStatsTimestampTime of last IP frame for this entry.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.9.4.1.3 |
ipadIPTopNStatsRxFramesNumber of received IP frames for this entry.ro INTEGER .1.3.6.1.4.1.321.100.1.9.4.1.4 |
ipadIPTopNStatsRxOctetsNumber of received IP octets for this entry.ro INTEGER .1.3.6.1.4.1.321.100.1.9.4.1.5 |
ipadIPTopNStatsTxFramesNumber of transmitted IP frames for this entry.ro INTEGER .1.3.6.1.4.1.321.100.1.9.4.1.6 |
ipadIPTopNStatsTxOctetsNumber of transmitted IP octets for this entry.ro INTEGER .1.3.6.1.4.1.321.100.1.9.4.1.7 |
ipadPktSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.10 |
ipadPktSwOperatingModeSelects overall mode of operation.rw Enumeration .1.3.6.1.4.1.321.100.1.10.1 |
ipadPktSwCfgTableThe ipad packet switch configuration table. SEQUENCE OF IpadPktSwCfgTableEntry .1.3.6.1.4.1.321.100.1.10.2 |
ipadPktSwCfgTableEntryAn entry in the ipad packet switch configuration table. IpadPktSwCfgTableEntry .1.3.6.1.4.1.321.100.1.10.2.1 |
ipadPktSwCfgServiceThe index into the packet switch configuration table; an entry in the ipad Service table.ro INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.1 |
ipadPktSwCfgInterfaceTypeNetwork ports should be set to User Network Interface (uni) and user ports should be set to Network Interface (ni).rw Enumeration .1.3.6.1.4.1.321.100.1.10.2.1.2 |
ipadPktSwCfgLnkMgmtTypeIf set to auto, the frame relay LMI type will be learned from the network side. If set to none, all DLCI must be configured.rw Enumeration .1.3.6.1.4.1.321.100.1.10.2.1.3 |
ipadPktSwCfgMaxFrameSizeThis is the maximum frame size configured in the frame relay network.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.4 |
ipadPktSwCfgnN1Number of keep alive requests between full status request.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.5 |
ipadPktSwCfgnN2Number of errors from FRAD before alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.6 |
ipadPktSwCfgnN3Number of events to sample nN2.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.7 |
ipadPktSwCfgnT1Delay before issuing a poll sequence.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.8 |
ipadPktSwCfgDefCIRDefault committed information rate in bits per second.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.9 |
ipadPktSwCfgDefExBurstDefault excess burst rate in bits per second.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.10 |
ipadPktSwCfgCIREEDetermines if the interface will enforce CIR and excess burst configured values.rw Enumeration .1.3.6.1.4.1.321.100.1.10.2.1.11 |
ipadPktSwCfgLinkInjectionIndicates how to process frames in excess of the CIR when congestion exists.rw Enumeration .1.3.6.1.4.1.321.100.1.10.2.1.12 |
ipadPktSwCfgAutoDiagnosticDetermines if the unit will put itself into diagnostic mode everytime it determines that there are no LMI received on a network service.rw Enumeration .1.3.6.1.4.1.321.100.1.10.2.1.13 |
ipadPktSwCfgAutoDiscoveryDetermines if the unit will learn the DLCIs from the LMMI received on this service.rw Enumeration .1.3.6.1.4.1.321.100.1.10.2.1.14 |
ipadPktSwCfgMgmtDLCISpecifies the DLCI that will be used by the unit for management information. Specifying a 0 disables this feature.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.15 |
ipadPktSwCfgRoundTripDelaySizeSpecifies the packet size in octets used to calculate round trip delay.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.16 |
ipadPktSwCfgRoundTripDelayRateSpecifies the packet rate in seconds used to calculate round trip delay.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.17 |
ipadPktSwCfgAutoIPMgmtAddrLook for DLCI (980-995) and uses its IP address.rw Enumeration .1.3.6.1.4.1.321.100.1.10.2.1.18 |
ipadPktSwCfgNormalTxQueueSizeThe depth of the normal priority tx queue. This size determines the max number of low priority packets that can be queued in front of high priority traffic.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.19 |
ipadPktSwCfgAddDLCIIdentifies a DLCI number to be added.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.20 |
ipadPktSwCfgDeleteDLCIIdentifies a DLCI number to be deleted.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.21 |
ipadTrapDest OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.11 |
ipadTrapDestTableThe ipad trap destination table. SEQUENCE OF IpadTrapDestTableEntry .1.3.6.1.4.1.321.100.1.11.1 |
ipadTrapDestTableEntryAn entry in the ipad trap destination table. IpadTrapDestTableEntry .1.3.6.1.4.1.321.100.1.11.1.1 |
ipadTrapDestIndexIndex into the ipad trap destination table.ro INTEGER .1.3.6.1.4.1.321.100.1.11.1.1.1 |
ipadTrapDestinationTrap destination.rw IpAddress .1.3.6.1.4.1.321.100.1.11.1.1.2 |
ipadMisc OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.12 |
ipadMiscPortSettingsThe ipad miscellaneous port settings table. SEQUENCE OF IpadMiscPortSettingsEntry .1.3.6.1.4.1.321.100.1.12.1 |
ipadMiscPortSettingsEntryAn entry in the ipad miscellaneous port settings table. IpadMiscPortSettingsEntry .1.3.6.1.4.1.321.100.1.12.1.1 |
ipadMiscPortSettingsIndexThe MIB-II ifIndex for this port.ro INTEGER .1.3.6.1.4.1.321.100.1.12.1.1.1 |
ipadMiscPortSettingsSerialTypeThe type of this serial port.rw Enumeration .1.3.6.1.4.1.321.100.1.12.1.1.2 |
ipadMiscPortSettingsModemControlRequest the attached service to use the modem dialing control feature.rw Enumeration .1.3.6.1.4.1.321.100.1.12.1.1.3 |
ipadMiscClearStatusCountsWriting a 2 to this field will clear all status counts.rw Enumeration .1.3.6.1.4.1.321.100.1.12.2 |
ipadMiscEnableServiceAwareWriting a 3 to this field will enable service aware statistics gathering.rw Enumeration .1.3.6.1.4.1.321.100.1.12.3 |
ipadMiscShdslConfigTableThe ipad miscellaneous SHDSL configuration table. SEQUENCE OF IpadMiscShdslConfigEntry .1.3.6.1.4.1.321.100.1.12.4 |
ipadMiscShdslConfigEntryAn entry in the ipad miscellaneous SHDSL configuration table. IpadMiscShdslConfigEntry .1.3.6.1.4.1.321.100.1.12.4.1 |
ipadMiscShdslConfigIndexThis object is the index into the SHDSL configuration table.ro INTEGER .1.3.6.1.4.1.321.100.1.12.4.1.1 |
ipadMiscShdslTerminalTypeSelects whether the tu is a central or remote site terminal unit. Applicable to HDSL2/SHDSL only.rw Enumeration .1.3.6.1.4.1.321.100.1.12.4.1.2 |
ipadMiscShdslTimingSets the timing source to synchronize the unit's internal timing generators.rw Enumeration .1.3.6.1.4.1.321.100.1.12.4.1.3 |
ipadMiscShdslStationInTimingSelects the input timing if SHDSLTiming is set to Station.rw Enumeration .1.3.6.1.4.1.321.100.1.12.4.1.4 |
ipadMiscShdslStationTimingNxMultipleSelects the N-multiple when Station Input Timing is set to either NX56 or NX65.rw INTEGER .1.3.6.1.4.1.321.100.1.12.4.1.5 |
ipadMiscShdslAutomaticRetrainEnable or disable automatic line retraining when needed. Enable is the default. Disable is used for PSD measurement.rw Enumeration .1.3.6.1.4.1.321.100.1.12.4.1.6 |
ipadMiscShdslStatusTableThe ipad miscellaneous SHDSL status table. SEQUENCE OF IpadMiscShdslStatusEntry .1.3.6.1.4.1.321.100.1.12.5 |
ipadMiscShdslStatusEntryAn entry in the ipad miscellaneous SHDSL status table. IpadMiscShdslStatusEntry .1.3.6.1.4.1.321.100.1.12.5.1 |
ipadMiscShdslStatusIndexThis object is the index into the SHDSL configuration table.ro INTEGER .1.3.6.1.4.1.321.100.1.12.5.1.1 |
ipadMiscShdslConnectionStatusThis object displays the connection status of Wire Pair 1 of an SHDSL connection.ro Enumeration .1.3.6.1.4.1.321.100.1.12.5.1.2 |
ipadMiscShdslDetailedConnectionStatusThis object displays the detailed connection status of Wire Pair 1 of an SHDSL connection.ro DisplayString .1.3.6.1.4.1.321.100.1.12.5.1.3 |
ipadMiscShdslEOCInMessagesThis object displays the number of EOC messages received.ro INTEGER .1.3.6.1.4.1.321.100.1.12.5.1.4 |
ipadMiscShdslEOCOutMessagesThis object displays the number of EOC messages transmitted.ro INTEGER .1.3.6.1.4.1.321.100.1.12.5.1.5 |
ipadMiscShdslConnectionStatusPair2This object displays the connection status of Wire Pair 2 of an SHDSL connection.ro Enumeration .1.3.6.1.4.1.321.100.1.12.5.1.6 |
ipadMiscShdslDetailedConnectionStatusPair2This object displays the detailed connection status of Wire Pair 2 of an SHDSL connection.ro DisplayString .1.3.6.1.4.1.321.100.1.12.5.1.7 |
ipadMiscEnableSupervisoryPortWriting a 2 to this field will disable VT100 and telnet. Writing a 3 to this field will enable VT100 and telnet.rw Enumeration .1.3.6.1.4.1.321.100.1.12.6 |
ipadMiscEnableButtonsWriting a 2 to this field will disable the buttons. Writing a 3 to this field will enable the buttons.rw Enumeration .1.3.6.1.4.1.321.100.1.12.7 |
ipadMiscBootupConsoleAvailWriting a 2 to this field will disable the console port for diagnostic messages. Writing a 3 to this field will enable these messages.rw Enumeration .1.3.6.1.4.1.321.100.1.12.8 |
ipadMiscEnableLEDsWriting a 2 to this field will disable the LEDs. Writing a 3 to this field will enable the LEDs.rw Enumeration .1.3.6.1.4.1.321.100.1.12.9 |
ipadMiscDisableLANThis parameter defines the setup of the Ethernet LAN port. disable(2) - Disable the Ethernet LAN Port. enable(3) - Enable the Ethernet LAN port and auto-negotiate speed and duplex. half10(4) - Enable the Ethernet LAN port and manually set to 10 Mbps and half-duplex. full10(5) - Enable the Ethernet LAN port and manually set to 10 Mbps and full-duplex. half100(6) - Enable the Ethernet LAN port and manually set to 100 Mbps and half-duplex. full100(7) - Enable the Ethernet LAN port and manually set to 100 Mbps and full-duplex.rw Enumeration .1.3.6.1.4.1.321.100.1.12.10 |
ipadMiscLANStatusThis parameter defines the setup of the Ethernet LAN port. down(1) - Port has not negotiated. half10(2) - Port negotiated 10 Mbps and half-duplex. full10(3) - Port negotiated 10 Mbps and full-duplex. half100(4) - Port negotiated 100 Mbps and half-duplex. full100(5) - Port negotiated 100 Mbps and full-duplex. na(6) - Not Applicable (speed/duplex manually set).ro Enumeration .1.3.6.1.4.1.321.100.1.12.11 |
ipadRouter OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.13 |
ipadSoftKey OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.14 |
ipadSoftKeyTableTable of software keys. SEQUENCE OF IpadSoftKeyTableEntry .1.3.6.1.4.1.321.100.1.14.1 |
ipadSoftKeyTableEntryAn entry in the software key table. IpadSoftKeyTableEntry .1.3.6.1.4.1.321.100.1.14.1.1 |
ipadSoftKeyIndexIndex into the ipad software key table.ro INTEGER .1.3.6.1.4.1.321.100.1.14.1.1.1 |
ipadSoftKeyAcronymThree-letter acronym for software key.ro DisplayString .1.3.6.1.4.1.321.100.1.14.1.1.2 |
ipadSoftKeyDescriptionDescription, if available, of this software key.ro DisplayString .1.3.6.1.4.1.321.100.1.14.1.1.3 |
ipadSoftKeyExpirationDateExpiration date of this software key in the format YY/MM/DD.ro DisplayString .1.3.6.1.4.1.321.100.1.14.1.1.4 |
ipadSoftKeyEntryWriting a software key will enable that feature (assuming a correct and valid key is entered).rw DisplayString .1.3.6.1.4.1.321.100.1.14.2 |
ipadTCPServer OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.15 |
ipadTCPServerEnableEnables/disables the TCP Server.rw Enumeration .1.3.6.1.4.1.321.100.1.15.1 |
ipadTCPServerConnTableTable of TCP Server connections. SEQUENCE OF IpadTCPServerConnTableEntry .1.3.6.1.4.1.321.100.1.15.2 |
ipadTCPServerConnTableEntryAn entry in the TCP Server connection table. IpadTCPServerConnTableEntry .1.3.6.1.4.1.321.100.1.15.2.1 |
ipadTCPServerConnIndexIndex into the ipad TCP Server Connection table.ro INTEGER .1.3.6.1.4.1.321.100.1.15.2.1.1 |
ipadTCPServerConnEndpointIdentifies the endpoint for this connection.rw DisplayString .1.3.6.1.4.1.321.100.1.15.2.1.2 |
ipadTCPServerConnLocalPortIdentifies the TCP port for this connection (default: 2000).rw INTEGER .1.3.6.1.4.1.321.100.1.15.2.1.3 |
ipadTCPServerConnEnableEntryEnables or disables this entry.rw Enumeration .1.3.6.1.4.1.321.100.1.15.2.1.4 |
ipadTCPServerAddConnEntryWriting addnew(2) to this field causes a new (blank) connection to be appended to the TCP Server Table.rw Enumeration .1.3.6.1.4.1.321.100.1.15.3 |
ipadTCPServerDeleteConnEntryIdentifies a connection table entry to be deleted.rw INTEGER .1.3.6.1.4.1.321.100.1.15.4 |
ipadTCPServerHostAccessTableTable of TCP Server IP Host Access List. SEQUENCE OF IpadTCPServerHostAccessTableEntry .1.3.6.1.4.1.321.100.1.15.5 |
ipadTCPServerHostAccessTableEntryAn entry in the TCP Server Host Access List table. IpadTCPServerHostAccessTableEntry .1.3.6.1.4.1.321.100.1.15.5.1 |
ipadTCPServerHostAccessIndexIndex into the ipad trap destination table.ro INTEGER .1.3.6.1.4.1.321.100.1.15.5.1.1 |
ipadTCPServerHostAccessIPAddrTrap destination.rw IpAddress .1.3.6.1.4.1.321.100.1.15.5.1.2 |
ipadSCADAConfig OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.16 |
ipadSCADAConfigTableThe SCADA config table. SEQUENCE OF IpadSCADAConfigTableEntry .1.3.6.1.4.1.321.100.1.16.1 |
ipadSCADAConfigTableEntryAn entry in the SCADA config table. IpadSCADAConfigTableEntry .1.3.6.1.4.1.321.100.1.16.1.1 |
ipadSCADACfgIndexThe index for SCADA config table.ro INTEGER .1.3.6.1.4.1.321.100.1.16.1.1.1 |
ipadSCADACfgMessageSizeThe SCADA message size.rw INTEGER .1.3.6.1.4.1.321.100.1.16.1.1.2 |
ipadSCADACfgIdleCharDelayThe SCADA idle character delay.rw INTEGER .1.3.6.1.4.1.321.100.1.16.1.1.3 |
ipadSCADACfgInputTerminatorThe SCADA input message terminator.rw INTEGER .1.3.6.1.4.1.321.100.1.16.1.1.4 |
ipadSCADACfgAddDevLstAppends an entry to the SCADA device list table.rw Enumeration .1.3.6.1.4.1.321.100.1.16.1.1.5 |
ipadSCADACfgDeleteDevLstDeletes an entry in the SCADA device list table.rw INTEGER .1.3.6.1.4.1.321.100.1.16.1.1.6 |
ipadSCADACfgDataDirectionData Direction enables for SCADA configuration.rw Enumeration .1.3.6.1.4.1.321.100.1.16.1.1.7 |
ipadSCADACfgProtocolConfigured SCADA Protocol.rw Enumeration .1.3.6.1.4.1.321.100.1.16.1.1.8 |
ipadSCADACfgLoopbackLoopback allows user to loop data to either Network, Serial Port or both.rw Enumeration .1.3.6.1.4.1.321.100.1.16.1.1.9 |
ipadSCADAStats OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.17 |
ipadSCADAStatsTableThe SCADA statistics table. SEQUENCE OF IpadSCADAStatsTableEntry .1.3.6.1.4.1.321.100.1.17.1 |
ipadSCADAStatsTableEntryAn entry in the SCADA statistics table. IpadSCADAStatsTableEntry .1.3.6.1.4.1.321.100.1.17.1.1 |
ipadSCADAStatsIndexThe index for SCADA Statistics Table.ro INTEGER .1.3.6.1.4.1.321.100.1.17.1.1.1 |
ipadSCADAStatsTxCharsThe number of chracters transmitted through SCADA port.ro INTEGER .1.3.6.1.4.1.321.100.1.17.1.1.2 |
ipadSCADAStatsRxCharsThe number of chracters received through SCADA port.ro INTEGER .1.3.6.1.4.1.321.100.1.17.1.1.3 |
ipadSCADAStatsTxMsgsThe number of messages transmitted through SCADA port.ro INTEGER .1.3.6.1.4.1.321.100.1.17.1.1.4 |
ipadSCADAStatsRxMsgsThe number of messages received through SCADA port.ro INTEGER .1.3.6.1.4.1.321.100.1.17.1.1.5 |
ipadSCADAStatsRxParityErrorsThe number of parity errors received from SCADA port.ro INTEGER .1.3.6.1.4.1.321.100.1.17.1.1.6 |
ipadSCADAStatsRxFramingErrorsThe number of framming errors received from SCADA port.ro INTEGER .1.3.6.1.4.1.321.100.1.17.1.1.7 |
ipadSCADAStatsClearWriting a value of ipadSCADAStatsClearNow(2) to this field causes all existing stats to be cleared immediately.rw Enumeration .1.3.6.1.4.1.321.100.1.17.1.1.8 |
ipadSCADADevLst OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.18 |
ipadSCADADevLstTableThe SCADA device list table. SEQUENCE OF IpadSCADADevLstTableEntry .1.3.6.1.4.1.321.100.1.18.1 |
ipadSCADADevLstTableEntryAn entry in the SCADA device list table. IpadSCADADevLstTableEntry .1.3.6.1.4.1.321.100.1.18.1.1 |
ipadSCADADevLstIndexThe index for SCADA device list table.ro INTEGER .1.3.6.1.4.1.321.100.1.18.1.1.1 |
ipadSCADADevLstDevIndexThe index of device.ro INTEGER .1.3.6.1.4.1.321.100.1.18.1.1.2 |
ipadSCADADevLstEndpointNameThe name of the endpoint.rw DisplayString .1.3.6.1.4.1.321.100.1.18.1.1.3 |
ipadSCADADevLstEntryStatusThe disabled or dnabled status of the entry.rw Enumeration .1.3.6.1.4.1.321.100.1.18.1.1.4 |
ipadDS0Config OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.19 |
ipadDS0ConfigTableThe ipad DS0 Utilization Monitor Config table. SEQUENCE OF IpadDS0ConfigTableEntry .1.3.6.1.4.1.321.100.1.19.1 |
ipadDS0ConfigTableEntryAn entry in the ipad DS0 Utilization Monitor Config table. IpadDS0ConfigTableEntry .1.3.6.1.4.1.321.100.1.19.1.1 |
ipadDS0ConfigIndexIndex into the DS0 Utilization Monitor Config table.ro INTEGER .1.3.6.1.4.1.321.100.1.19.1.1.1 |
ipadDS0ConfigNumberDS0Number of DS0's monitored by this table entry.ro INTEGER .1.3.6.1.4.1.321.100.1.19.1.1.2 |
ipadDS0ConfigResetTimerNumber of contiguous seconds a utilization alarm must not be present before the alarm condition is automatically reset.rw INTEGER .1.3.6.1.4.1.321.100.1.19.1.1.3 |
ipadDS0ConfigHighUtilWhat the user considers a high DS0 utilization for this entry. Utilization is expressed as a percentage.rw INTEGER .1.3.6.1.4.1.321.100.1.19.1.1.4 |
ipadDS0ConfigHighUtilThresholdNumber of seconds a high utilization condition must be present within 15 minutes before an alarm condition is declared.rw INTEGER .1.3.6.1.4.1.321.100.1.19.1.1.5 |
ipadDS0ConfigHighUtilStatusIndicates if a high utilization condition exists.ro Enumeration .1.3.6.1.4.1.321.100.1.19.1.1.6 |
ipadDS0ConfigHighUtilCountThe number of seconds in the past 15 minutes that have been greater than or equal to the high utilization parameter. The value is calculated from a sliding window of 15 one-minute buckets.ro INTEGER .1.3.6.1.4.1.321.100.1.19.1.1.7 |
ipadDS0ConfigHighUtilAlarmIndicates if the high utilization alarm threshold is exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.19.1.1.8 |
ipadDS0ConfigLowUtilWhat the user considers an end-of-day low DS0 utilization for this entry. Utilization is expressed as a percentage. When the utilization is set to zero the low utilization alarm is disabled.rw INTEGER .1.3.6.1.4.1.321.100.1.19.1.1.9 |
ipadDS0ConfigLowUtilAlarmIndicates if the low utilization alarm is declared.ro Enumeration .1.3.6.1.4.1.321.100.1.19.1.1.10 |
ipadDS0ConfigResetThe set values perform the following actions: clearAlarms(2) - Clears any active DS0 utilization alarms and counts clearHistory(3) - Clears DS0 utilization history tables.rw Enumeration .1.3.6.1.4.1.321.100.1.19.1.1.11 |
ipadDS0Hist24 OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.20 |
ipadDS0Hist24TableThe ipad DS0 Utilization Monitor 24-Hour History table. SEQUENCE OF IpadDS0Hist24TableEntry .1.3.6.1.4.1.321.100.1.20.1 |
ipadDS0Hist24TableEntryAn entry in the ipad DS0 Utilization Monitor 24-Hour History table. IpadDS0Hist24TableEntry .1.3.6.1.4.1.321.100.1.20.1.1 |
ipadDS0Hist24IndexIndex into the DS0 Utilization Monitor 24-Hour History table.ro INTEGER .1.3.6.1.4.1.321.100.1.20.1.1.1 |
ipadDS0Hist24HistoricalIndexHistorical index into the DS0 Utilization Monitor 24-Hour History table.ro Enumeration .1.3.6.1.4.1.321.100.1.20.1.1.2 |
ipadDS0Hist24TimestampSysUpTime when the utilization interval completed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.20.1.1.3 |
ipadDS0Hist24HighUtilSecondsThe number of seconds in the interval that have been greater than or equal to the high utilization parameter.ro INTEGER .1.3.6.1.4.1.321.100.1.20.1.1.4 |
ipadDS0Hist24UtilizationThe percent of DS0's utilized over the given interval.ro INTEGER .1.3.6.1.4.1.321.100.1.20.1.1.5 |
ipadDS0Hist30 OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.21 |
ipadDS0Hist30TableThe ipad DS0 Utilization Monitor 30-Day History table. SEQUENCE OF IpadDS0Hist30TableEntry .1.3.6.1.4.1.321.100.1.21.1 |
ipadDS0Hist30TableEntryAn entry in the ipad DS0 Utilization Monitor 30-Day History table. IpadDS0Hist30TableEntry .1.3.6.1.4.1.321.100.1.21.1.1 |
ipadDS0Hist30IndexIndex into the DS0 Utilization Monitor 30-Day History table.ro INTEGER .1.3.6.1.4.1.321.100.1.21.1.1.1 |
ipadDS0Hist30HistoricalIndexHistorical index into the DS0 Utilization Monitor 30-Day History table.ro Enumeration .1.3.6.1.4.1.321.100.1.21.1.1.2 |
ipadDS0Hist30TimestampSysUpTime when the utilization interval completed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.21.1.1.3 |
ipadDS0Hist30HighUtilSecondsThe number of seconds in the interval that have been greater than or equal to the high utilization parameter.ro INTEGER .1.3.6.1.4.1.321.100.1.21.1.1.4 |
ipadDS0Hist30UtilizationThe percent of DS0's utilized over the given interval.ro INTEGER .1.3.6.1.4.1.321.100.1.21.1.1.5 |
ipadHDLCConfig OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.22 |
ipadHDLCConfigTableThe ipad HDLC Utilization Monitor Config table. SEQUENCE OF IpadHDLCConfigTableEntry .1.3.6.1.4.1.321.100.1.22.1 |
ipadHDLCConfigTableEntryAn entry in the ipad HDLC Utilization Monitor Config table. IpadHDLCConfigTableEntry .1.3.6.1.4.1.321.100.1.22.1.1 |
ipadHDLCConfigIndexIndex into the HDLC Utilization Monitor Config table.ro INTEGER .1.3.6.1.4.1.321.100.1.22.1.1.1 |
ipadHDLCConfigServiceService the HDLC utilization monitor is attached. 0 = Disabled.rw INTEGER .1.3.6.1.4.1.321.100.1.22.1.1.2 |
ipadHDLCConfigServiceBPSService bit rate.ro INTEGER .1.3.6.1.4.1.321.100.1.22.1.1.3 |
ipadHDLCConfigResetTimerNumber of contiguous seconds a utilization alarm must not be present before the alarm condition is automatically reset.rw INTEGER .1.3.6.1.4.1.321.100.1.22.1.1.4 |
ipadHDLCConfigRxHighUtilWhat the user considers a high Rx HDLC utilization for this entry. Utilization is expressed as a percentage.rw INTEGER .1.3.6.1.4.1.321.100.1.22.1.1.5 |
ipadHDLCConfigRxHighUtilThresholdNumber of seconds a Rx high utilization condition must be present within 15 minutes before an alarm condition is declared.rw INTEGER .1.3.6.1.4.1.321.100.1.22.1.1.6 |
ipadHDLCConfigRxHighUtilStatusIndicates if a Rx high utilization condition exists.ro Enumeration .1.3.6.1.4.1.321.100.1.22.1.1.7 |
ipadHDLCConfigRxHighUtilCountThe number of seconds in the past 15 minutes that have been greater than or equal to the Rx high utilization parameter. The value is calculated from a sliding window of 15 one-minute buckets.ro INTEGER .1.3.6.1.4.1.321.100.1.22.1.1.8 |
ipadHDLCConfigRxHighUtilAlarmIndicates if the Rx high utilization alarm threshold is exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.22.1.1.9 |
ipadHDLCConfigRxLowUtilWhat the user considers an end-of-day low Rx HDLC utilization for this entry. Utilization is expressed as a percentage. When the utilization is set to zero the Rx low utilization alarm is disabled.rw INTEGER .1.3.6.1.4.1.321.100.1.22.1.1.10 |
ipadHDLCConfigRxLowUtilAlarmIndicates if the Rx low utilization alarm is declared.ro Enumeration .1.3.6.1.4.1.321.100.1.22.1.1.11 |
ipadHDLCConfigTxHighUtilWhat the user considers a high Tx HDLC utilization for this entry. Utilization is expressed as a percentage.rw INTEGER .1.3.6.1.4.1.321.100.1.22.1.1.12 |
ipadHDLCConfigTxHighUtilThresholdNumber of seconds a Tx high utilization condition must be present within 15 minutes before an alarm condition is declared.rw INTEGER .1.3.6.1.4.1.321.100.1.22.1.1.13 |
ipadHDLCConfigTxHighUtilStatusIndicates if a Tx high utilization condition exists.ro Enumeration .1.3.6.1.4.1.321.100.1.22.1.1.14 |
ipadHDLCConfigTxHighUtilCountThe number of seconds in the past 15 minutes that have been greater than or equal to the Tx high utilization parameter. The value is calculated from a sliding window of 15 one-minute buckets.ro INTEGER .1.3.6.1.4.1.321.100.1.22.1.1.15 |
ipadHDLCConfigTxHighUtilAlarmIndicates if the Tx high utilization alarm threshold is exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.22.1.1.16 |
ipadHDLCConfigTxLowUtilWhat the user considers an end-of-day low Tx HDLC utilization for this entry. Utilization is expressed as a percentage. When the utilization is set to zero the Tx low utilization alarm is disabled.rw INTEGER .1.3.6.1.4.1.321.100.1.22.1.1.17 |
ipadHDLCConfigTxLowUtilAlarmIndicates if the Tx low utilization alarm is declared.ro Enumeration .1.3.6.1.4.1.321.100.1.22.1.1.18 |
ipadHDLCConfigResetThe set values perform the following actions: clearAlarms(2) - Clears any active HDLC utilization alarms and counts clearHistory(3) - Clears HDLC utilization history tables.rw Enumeration .1.3.6.1.4.1.321.100.1.22.1.1.19 |
ipadHDLCHist24 OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.23 |
ipadHDLCHist24TableThe ipad HDLC Utilization Monitor 24-Hour History table. SEQUENCE OF IpadHDLCHist24TableEntry .1.3.6.1.4.1.321.100.1.23.1 |
ipadHDLCHist24TableEntryAn entry in the ipad HDLC Utilization Monitor 24-Hour History table. IpadHDLCHist24TableEntry .1.3.6.1.4.1.321.100.1.23.1.1 |
ipadHDLCHist24IndexIndex into the HDLC Utilization Monitor 24-Hour History table.ro INTEGER .1.3.6.1.4.1.321.100.1.23.1.1.1 |
ipadHDLCHist24HistoricalIndexHistorical index into the HDLC Utilization Monitor 24-Hour History table.ro Enumeration .1.3.6.1.4.1.321.100.1.23.1.1.2 |
ipadHDLCHist24TimestampSysUpTime when the utilization interval completed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.23.1.1.3 |
ipadHDLCHist24RxHighUtilSecondsThe number of seconds in the interval that have been greater than or equal to the Rx high utilization parameter.ro INTEGER .1.3.6.1.4.1.321.100.1.23.1.1.4 |
ipadHDLCHist24RxUtilizationThe percent of Rx HDLC bandwidth utilized over the given interval.ro INTEGER .1.3.6.1.4.1.321.100.1.23.1.1.5 |
ipadHDLCHist24TxHighUtilSecondsThe number of seconds in the interval that have been greater than or equal to the Tx high utilization parameter.ro INTEGER .1.3.6.1.4.1.321.100.1.23.1.1.6 |
ipadHDLCHist24TxUtilizationThe percent of Tx HDLC bandwidth utilized over the given interval.ro INTEGER .1.3.6.1.4.1.321.100.1.23.1.1.7 |
ipadHDLCHist30 OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.24 |
ipadHDLCHist30TableThe ipad HDLC Utilization Monitor 30-Day History table. SEQUENCE OF IpadHDLCHist30TableEntry .1.3.6.1.4.1.321.100.1.24.1 |
ipadHDLCHist30TableEntryAn entry in the ipad HDLC Utilization Monitor 30-Day History table. IpadHDLCHist30TableEntry .1.3.6.1.4.1.321.100.1.24.1.1 |
ipadHDLCHist30IndexIndex into the HDLC Utilization Monitor 30-Day History table.ro INTEGER .1.3.6.1.4.1.321.100.1.24.1.1.1 |
ipadHDLCHist30HistoricalIndexHistorical index into the HDLC Utilization Monitor 30-Day History table.ro Enumeration .1.3.6.1.4.1.321.100.1.24.1.1.2 |
ipadHDLCHist30TimestampSysUpTime when the utilization interval completed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.24.1.1.3 |
ipadHDLCHist30RxHighUtilSecondsThe number of seconds in the interval that have been greater than or equal to the Rx high utilization parameter.ro INTEGER .1.3.6.1.4.1.321.100.1.24.1.1.4 |
ipadHDLCHist30RxUtilizationThe percent of Rx HDLC bandwidth utilized over the given interval.ro INTEGER .1.3.6.1.4.1.321.100.1.24.1.1.5 |
ipadHDLCHist30TxHighUtilSecondsThe number of seconds in the interval that have been greater than or equal to the Tx high utilization parameter.ro INTEGER .1.3.6.1.4.1.321.100.1.24.1.1.6 |
ipadHDLCHist30TxUtilizationThe percent of Tx HDLC bandwidth utilized over the given interval.ro INTEGER .1.3.6.1.4.1.321.100.1.24.1.1.7 |
ipadAtm OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.25 |
ipadNat OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.26 |
ipadDhcp OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.27 |
ipadBridge OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.28 |
ipadSmtp OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.29 |
ipadSmtpMailServerIP Address of the .rw IpAddress .1.3.6.1.4.1.321.100.1.29.1 |
ipadSmtpDomainNameDomain Name of the SMTP client.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.100.1.29.2 |
ipadSmtpMailFromName of the SMTP client, is used in the From section of the email.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.100.1.29.3 |
ipadSmtpRecipient1Destination for the email.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.100.1.29.4 |
ipadSmtpRecipient2Destination for the email.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.100.1.29.5 |
ipadSmtpRecipient3Destination for the email.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.100.1.29.6 |
ipadSmtpRecipient4Destination for the email.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.100.1.29.7 |
ipadSmtpRecipient5Destination for the email.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.100.1.29.8 |
ipadEncryption OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.30 |
ipadEncryptionEnableAllow disabling encryption.rw Enumeration .1.3.6.1.4.1.321.100.1.30.1 |
ipadEncryptionStartupKeyrw DisplayString .1.3.6.1.4.1.321.100.1.30.2 |
ipadEncryptionStartupKeyConfirmrw DisplayString .1.3.6.1.4.1.321.100.1.30.3 |
ipadEncryptionTyperw Enumeration .1.3.6.1.4.1.321.100.1.30.4 |
ipadEncryptionKey1rw DisplayString .1.3.6.1.4.1.321.100.1.30.5 |
ipadEncryptionKey2rw DisplayString .1.3.6.1.4.1.321.100.1.30.6 |
ipadEncryptionKey3rw DisplayString .1.3.6.1.4.1.321.100.1.30.7 |
ipadEncryptionKey4rw DisplayString .1.3.6.1.4.1.321.100.1.30.8 |
ipadEncryptionKey5rw DisplayString .1.3.6.1.4.1.321.100.1.30.9 |
ipadEncryptionKey6rw DisplayString .1.3.6.1.4.1.321.100.1.30.10 |
ipadEncryptionKey7rw DisplayString .1.3.6.1.4.1.321.100.1.30.11 |
ipadEncryptionKey8rw DisplayString .1.3.6.1.4.1.321.100.1.30.12 |
ipadEncryptionKey9rw DisplayString .1.3.6.1.4.1.321.100.1.30.13 |
ipadEncryptionKey10rw DisplayString .1.3.6.1.4.1.321.100.1.30.14 |
ipadEncryptionKeyLiferw INTEGER .1.3.6.1.4.1.321.100.1.30.15 |
ipadAutoLearnDS0 OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.31 |
ipadAutoLearnDS0TableThe ipad Auto Learn DS0 Config table. SEQUENCE OF IpadAutoLearnDS0TableEntry .1.3.6.1.4.1.321.100.1.31.1 |
ipadAutoLearnDS0TableEntryAn entry in the ipad Auto Learn DS0 Config table. IpadAutoLearnDS0TableEntry .1.3.6.1.4.1.321.100.1.31.1.1 |
ipadAutoLearnDS0IndexThe MIB-II ifIndex into the Auto Learn DS0 Config table.ro INTEGER .1.3.6.1.4.1.321.100.1.31.1.1.1 |
ipadAutoLearnDS0BootSelect when to automatically learn DS0 assignments: disable - Do not automatically learn DS0s enable - Learn on boot carrierDown - Learn on boot and while the ifIndex carrier is down serviceDown - Learn on boot and while the first service on ifIndex is downrw Enumeration .1.3.6.1.4.1.321.100.1.31.1.1.2 |
ipadAutoLearnDS0RateSelect the rate of the learned DS0's.rw Enumeration .1.3.6.1.4.1.321.100.1.31.1.1.3 |
ipadAutoLearnDS0CommandThe set values perform the following actions: learnNow(2) - Attempt to learn the active DS0's now.rw Enumeration .1.3.6.1.4.1.321.100.1.31.1.1.4 |
ipadUnitAccess OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.32 |
ipadUnitAccessTableThe ipad Unit Access table. SEQUENCE OF IpadUnitAccessTableEntry .1.3.6.1.4.1.321.100.1.32.1 |
ipadUnitAccessTableEntryAn entry in the ipad Unit Access table. IpadUnitAccessTableEntry .1.3.6.1.4.1.321.100.1.32.1.1 |
ipadUnitAccessIndexThe MIB-II Index into the Unit Access table.ro INTEGER .1.3.6.1.4.1.321.100.1.32.1.1.1 |
ipadUnitAccessIpaIP Address of Source to allow Unit Access.rw IpAddress .1.3.6.1.4.1.321.100.1.32.1.1.2 |
ipadUnitAccessMaskMask of Source to allow Unit Access.rw IpAddress .1.3.6.1.4.1.321.100.1.32.1.1.3 |
ipadTFTPDownload OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.33 |
ipadTFTPDownloadServerIpaTFTP Server IP Address.rw IpAddress .1.3.6.1.4.1.321.100.1.33.1 |
ipadTFTPDownloadFileNameTFTP Filename to Download or Upload.rw DisplayString .1.3.6.1.4.1.321.100.1.33.2 |
ipadTFTPDownloadActionTFTP Action to be performed.rw Enumeration .1.3.6.1.4.1.321.100.1.33.3 |
ipadTFTPDownloadStatusTFTP current status of action.ro Enumeration .1.3.6.1.4.1.321.100.1.33.4 |
ipadDataLineMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.34 |
ipadDLMConfig OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.34.1 |
ipadDLMConfigModeData Link Monitor on/off switch. Toggles mode from analyze (static) to live (capture).rw Enumeration .1.3.6.1.4.1.321.100.1.34.1.1 |
ipadDLMConfigBufferManagementThe DLM has a buffer of n messages. Settings this object to wrap(2) allows the buffer to wrap around and be a continous buffer. stopOnFull(3) forces the capture of packets to stop once the end of the buffer is reached.rw Enumeration .1.3.6.1.4.1.321.100.1.34.1.2 |
ipadDLMTableThe ipad Data Line Monitor configuration table. SEQUENCE OF IpadDLMTableEntry .1.3.6.1.4.1.321.100.1.34.2 |
ipadDLMTableEntryAn entry in the ipad DLM config table. IpadDLMTableEntry .1.3.6.1.4.1.321.100.1.34.2.1 |
ipadDLMServiceIndexThe service index into the DLM table.ro INTEGER .1.3.6.1.4.1.321.100.1.34.2.1.1 |
ipadDLMEnableEnable/Disable the DLM on the specified service.rw Enumeration .1.3.6.1.4.1.321.100.1.34.2.1.2 |
ipadDLMTxRxFilterAllows the user to capture only received, transmit, or both.rw Enumeration .1.3.6.1.4.1.321.100.1.34.2.1.3 |
ipadDLMPatternEnableEnable/Disable the search for a specific pattern.rw Enumeration .1.3.6.1.4.1.321.100.1.34.2.1.4 |
ipadDLMPatternThe pattern to search for in the captured packets.rw INTEGER .1.3.6.1.4.1.321.100.1.34.2.1.5 |
ipadDLMPatternMaskThe mask to use with ipadDLMPattern to search for in the captured packets.rw INTEGER .1.3.6.1.4.1.321.100.1.34.2.1.6 |
ipadDLMPatternOffsetThe offset into the packet to search for the pattern.rw INTEGER .1.3.6.1.4.1.321.100.1.34.2.1.7 |
ipadDLMPacketTableThe ipad Data Link Monitor packet table. SEQUENCE OF IpadDLMPacketTableEntry .1.3.6.1.4.1.321.100.1.34.3 |
ipadDLMPacketTableEntryAn entry in the ipad DLM packet table. IpadDLMPacketTableEntry .1.3.6.1.4.1.321.100.1.34.3.1 |
ipadDLMPacketIndexThe service index into the DLM table.ro INTEGER .1.3.6.1.4.1.321.100.1.34.3.1.1 |
ipadDLMPacketServiceIndexThe service index the packet was captured on.ro INTEGER .1.3.6.1.4.1.321.100.1.34.3.1.2 |
ipadDLMPacketTimestampThe time that the packet was captured.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.34.3.1.3 |
ipadDLMPacketDataDirectionThe direction the data was goin in respect to the interface.ro Enumeration .1.3.6.1.4.1.321.100.1.34.3.1.4 |
ipadDLMPacketSizeThe size of the captured packet.ro INTEGER .1.3.6.1.4.1.321.100.1.34.3.1.5 |
ipadDLMPacketDataThe contents of the first 32 bytes of the captured packet.ro OCTET STRING( SIZE .1.3.6.1.4.1.321.100.1.34.3.1.6 |
ipadOrigPing OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.35 |
ipadOrigPingCommandAction command to start/stop sending PING messages.rw Enumeration .1.3.6.1.4.1.321.100.1.35.1 |
ipadOrigPingDestIPAddrDestination IP address of sent PING request messages.rw IpAddress .1.3.6.1.4.1.321.100.1.35.2 |
ipadOrigPingTimeoutNumber of seconds to wait for a reply to a PING request message.rw INTEGER .1.3.6.1.4.1.321.100.1.35.3 |
ipadOrigPingSizeNumber of bytes in a PING request message data field.rw INTEGER .1.3.6.1.4.1.321.100.1.35.4 |
ipadOrigPingToSendNumber of PING request messages to send.rw INTEGER .1.3.6.1.4.1.321.100.1.35.5 |
ipadOrigPingSentNumber of PING request messages sent.ro INTEGER .1.3.6.1.4.1.321.100.1.35.6 |
ipadOrigPingRepliesNumber of PING response messages received.ro INTEGER .1.3.6.1.4.1.321.100.1.35.7 |
ipadOrigPingDelayMinMinimum PING round trip delay in milliseconds.ro INTEGER .1.3.6.1.4.1.321.100.1.35.8 |
ipadOrigPingDelayAvgAverage PING round trip delay in milliseconds.ro INTEGER .1.3.6.1.4.1.321.100.1.35.9 |
ipadOrigPingDelayMaxMaximum PING round trip delay in milliseconds.ro INTEGER .1.3.6.1.4.1.321.100.1.35.10 |
ipadOrigPingReportASCII status report of originate PING activity.ro DisplayString .1.3.6.1.4.1.321.100.1.35.11 |
ipadOrigPingExceptReportASCII status report of last originate PING exception received.ro DisplayString .1.3.6.1.4.1.321.100.1.35.12 |
ipadTraps OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.999 |
ipadTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.999.0 |
ipadFrPortRxInvalidFramesExceededThis trap is sent out when an ipad frame relay port receive invalid frames alarm threshold has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25000 |
ipadFrPortRxThroughputExceededThis trap is sent out when an ipad frame relay port receive throughput threshold has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25001 |
ipadFrPortTxThroughputExceededThis trap is sent out when an ipad frame relay port transmit throughput threshold has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25002 |
ipadDLCItxCIRexceededThis trap is sent out when the Tx over CIR threshold has been exceeded. This threshold is the number of frames in excess of CIR. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25003 |
ipadDLCItxBEexceededThis trap is sent out when the Tx over Be threshold has been exceeded. This threshold is the number of frames in excess of Be. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25004 |
ipadDLCIRxCongestionExceededThis trap is sent out when the Rx congestion threshold has been exceeded. This threshold is the number of frames received with BECN/FECN. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25005 |
ipadUserTxExceededThis trap is sent out when the Tx throughput threshold in bits per second has been exceeded. This threshold represents the number of bits for the user-selected protocol. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25006 |
ipadDlciRxBECNinCIRAlarmThis trap is sent out when a frame with BECN set has been received within CIR. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25007 |
ipadDlciUASExceededThis trap is sent out when the UAS (unavailable seconds) threshold for the DLCI has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25008 |
ipadserialDteDTRAlarmExistsThis trap is sent out when a DTR Loss alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25009 |
ipadt1e1ESAlarmDeclaredThis trap is sent out when an Errored Seconds alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25010 |
ipadt1e1SESAlarmDeclaredThis trap is sent out when a Severely Errored Seconds alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25011 |
ipadt1e1LOSSAlarmDeclaredThis trap is sent out when a Loss of Signal Seconds alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25012 |
ipadt1e1UASAlarmDeclaredThis trap is sent out when an Unavailable Seconds alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25013 |
ipadt1e1CSSAlarmDeclaredThis trap is sent out when a Controlled Slip Seconds alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25014 |
ipadt1e1BPVSAlarmDeclaredThis trap is sent out when a Bipolar Violation Seconds alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25015 |
ipadt1e1OOFSAlarmDeclaredThis trap is sent out when an Out of Frame Seconds alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25016 |
ipadt1e1AISAlarmExistsThis trap is sent out when an Alarm Indication Signal alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25017 |
ipadt1e1RASAlarmExistsThis trap is sent out when a Remote Alarm Signal alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25018 |
ipadDLCIremoteSOSAlarmThis trap is sent when the remote unit for a DLCI senses and reports an SOS condition. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25019 |
ipadDdsLOSSAlarmDeclaredThis trap is sent out when a Loss of Signal Seconds alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25020 |
ipadDdsOOFSAlarmDeclaredThis trap is sent out when an Out of Frame Seconds alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25021 |
ipadDdsOOSSAlarmDeclaredThis trap is sent out when an Out of Service Seconds alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25022 |
ipadDdsFDLSAlarmDeclaredThis trap is sent out when a FDL error Seconds alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25023 |
ipadDdsBPVSAlarmDeclaredThis trap is sent out when a Bipolar Violation Seconds alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25024 |
ipadDS0HighAlarmDeclaredThis trap is sent out when a high utilization alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25025 |
ipadDS0LowAlarmDeclaredThis trap is sent out when a low utilization alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25026 |
ipadHDLCRxHighAlarmDeclaredThis trap is sent out when a high Rx utilization alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25027 |
ipadHDLCRxLowAlarmDeclaredThis trap is sent out when a low Rx utilization alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25028 |
ipadHDLCTxHighAlarmDeclaredThis trap is sent out when a high Tx utilization alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25029 |
ipadHDLCTxLowAlarmDeclaredThis trap is sent out when a low Tx utilization alarm is declared. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25030 |
ipadDbuActivatedThis trap is sent out when Dial Backup becomes active. NOTIFICATION-TYPE .1.3.6.1.4.1.321.100.1.999.0.25031 |