VERILINK-ENTERPRISE-NCMDS3-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
199
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
199 total| Object Name |
|---|
RFC1213-MIBThe HDM DS3 Port table. Unknown .1.3.6.1.4.1.321.1.3036.9000 |
ncmhdmHssi1PortTableThe HDM HSSI Port table. SEQUENCE OF NcmhdmHssi1PortEntry .1.3.6.1.4.1.321.1.3036.9001 |
ncmhdmHssi1PortEntryAn entry in the dsu information table. NcmhdmHssi1PortEntry .1.3.6.1.4.1.321.1.3036.9001.1 |
ncmhdmDs3Hssi1NIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3036.9001.1.1 |
ncmhdmHssi1PortIndexThe index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance.ro INTEGER .1.3.6.1.4.1.321.1.3036.9001.1.2 |
ncmhdmHssi1ConfigModeSet the Hssi Port to be automatic configuration
or manual configuration.rw Enumeration .1.3.6.1.4.1.321.1.3036.9001.1.3 |
ncmhdmHssi1PortConfigConfigure System - In-Service or Out of Service.rw Enumeration .1.3.6.1.4.1.321.1.3036.9001.1.4 |
ncmhdmHssi1TestModeReport status of the test mode of HSSI port.ro Enumeration .1.3.6.1.4.1.321.1.3036.9001.1.5 |
ncmhdmHssi1DataRateModeData Rate Mode for the Hssi Ports .rw Enumeration .1.3.6.1.4.1.321.1.3036.9001.1.6 |
ncmhdmHssi1HssiRateData Rate in # of T1.rw INTEGER .1.3.6.1.4.1.321.1.3036.9001.1.7 |
ncmhdmHssi1CircuitIDThis is the Circuit ID for the Hssi port.rw DisplayString .1.3.6.1.4.1.321.1.3036.9001.1.8 |
ncmhdmHssiStatTableThe HDM HSSI Stats. SEQUENCE OF NcmhdmHssiStatEntry .1.3.6.1.4.1.321.1.3036.9002 |
ncmhdmHssiStatEntryAn entry in the Hssi ds3 stats table. NcmhdmHssiStatEntry .1.3.6.1.4.1.321.1.3036.9002.1 |
ncmhdmHssiStatNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3036.9002.1.1 |
ncmhdmHssiStatIndexThe index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance.ro INTEGER .1.3.6.1.4.1.321.1.3036.9002.1.2 |
ncmhdmStatDCEReadyHssi Port DCE Ready OFF/ON.ro Enumeration .1.3.6.1.4.1.321.1.3036.9002.1.3 |
ncmhdmStatDTEReadyHssi Port DTE Ready OFF/ON.ro Enumeration .1.3.6.1.4.1.321.1.3036.9002.1.4 |
ncmhdmStatLpbkAHssi Port - Loopback A OFF/ON.ro Enumeration .1.3.6.1.4.1.321.1.3036.9002.1.5 |
ncmhdmStatLpbkBHssi Port - Loopback B OFF/ON.ro Enumeration .1.3.6.1.4.1.321.1.3036.9002.1.6 |
ncmhdmStatTestModeHssi Port Test Mode OFF/ON.ro Enumeration .1.3.6.1.4.1.321.1.3036.9002.1.7 |
ncmhdmStatPortStateHssi Port - In-Service or Out of Service.ro Enumeration .1.3.6.1.4.1.321.1.3036.9002.1.8 |
ncmhdmStatCIMTypeDs3 Cim Type.ro Enumeration .1.3.6.1.4.1.321.1.3036.9002.1.9 |
ncmhdmStatDiagStatusHssi User Equipment Loopback OFF/ON.ro Enumeration .1.3.6.1.4.1.321.1.3036.9002.1.10 |
ncmhdmCurrentTableThe DS3/E3 Current table. SEQUENCE OF NcmhdmCurrentEntry .1.3.6.1.4.1.321.1.3036.9003 |
ncmhdmCurrentEntryAn entry in the DS3/E3 Current table. NcmhdmCurrentEntry .1.3.6.1.4.1.321.1.3036.9003.1 |
ncmhdmCurrentNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3036.9003.1.1 |
ncmhdmCurrentIndexThe index value which uniquely identifies the
DS3/E3 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmhdmLineIndex object instance.ro INTEGER .1.3.6.1.4.1.321.1.3036.9003.1.2 |
ncmhdmCurrentCRC4StatusCurrent CRC4 Status.ro Enumeration .1.3.6.1.4.1.321.1.3036.9003.1.3 |
ncmhdmCurrentTimeStampSecsCurrent Time in seconds.ro INTEGER .1.3.6.1.4.1.321.1.3036.9003.1.4 |
ncmhdmCurrentTimeStampMSecsCurrent Time in milliseconds.ro INTEGER .1.3.6.1.4.1.321.1.3036.9003.1.5 |
ncmhdmCurrentSecsElapsSeconds elapsed in the current interval.ro INTEGER .1.3.6.1.4.1.321.1.3036.9003.1.6 |
ncmhdmCurrentFarEndCCVThe counter associated with the number of
Far End C-bit Code Violations,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.7 |
ncmhdmCurrentFarEndCESThe counter associated with the number of
Far End C-bit Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.8 |
ncmhdmCurrentFarEndCSESThe counter associated with the number of
Far End C-bit Severely Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.9 |
ncmhdmCurrentFarEndLUASFar End Line Unavailable Seconds. The counter associated
with the number of Seconds the Far End DS3 interface
was Out Of Service in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.10 |
ncmhdmCurrentLCVThe counter associated with the number of Line
Code Violations, a bipolar or excesive zero violation,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.11 |
ncmhdmCurrentLESLine Errored Second Total. The counter associated
with the number of Seconds of in which one or more
LCV occurred in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.12 |
ncmhdmCurrentLSESsThe counter associated with the number of
Line Severely Errored Seconds (LSES) in
the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.13 |
ncmhdmCurrentPCVThe counter associated with the number
of Parity Code Violations (locally calculated P-bits
disagree with those received),
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.14 |
ncmhdmCurrentPESThe counter associated with the number of Seconds
having at least one Parity Code Violation,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.15 |
ncmhdmCurrentPSESThe counter associated with the number of Seconds
having 44 or more Parity Code Violations,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.16 |
ncmhdmCurrentCCVThe counter associated with the number of
C-bit Code Violations,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.17 |
ncmhdmCurrentCESThe counter associated with the number of
C-bit Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.18 |
ncmhdmCurrentCSESThe counter associated with the number of
C-bit Severely Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.19 |
ncmhdmCurrentSEFSThe counter associated with the number of seconds
in which one or more Out of Frame occurred
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.20 |
ncmhdmCurrentAISSThe counter associated with the number of Seconds
in which one or more incoming AIS was detected
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.21 |
ncmhdmCurrentOOSSsThe counter associated with the number of Seconds
the DS3 interface was Out Of Service
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.22 |
ncmhdmCurrentLOSSsThe counter associated with the number of Seconds
Of system Loss Of Signal (LOS) in the current
15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.23 |
ncmhdmCurrentLOFSsThe counter associated with the number of Seconds
Of system Loss Of Frame (LOF) in the current
15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9003.1.24 |
ncmhdmIntervalTableThe DS3/E3 Interval table. SEQUENCE OF NcmhdmIntervalEntry .1.3.6.1.4.1.321.1.3036.9004 |
ncmhdmIntervalEntryAn entry in the DS3/E3 Interval table. NcmhdmIntervalEntry .1.3.6.1.4.1.321.1.3036.9004.1 |
ncmhdmIntervalNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3036.9004.1.1 |
ncmhdmIntervalIndexThe index value which uniquely identifies the
DS3/E3 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmhdmLineIndex object instance.ro INTEGER .1.3.6.1.4.1.321.1.3036.9004.1.2 |
ncmhdmIntervalNumberA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes inter-
val (assuming that all 96 intervals are
valid).ro INTEGER .1.3.6.1.4.1.321.1.3036.9004.1.3 |
ncmhdmIntervalFarEndCCVThe counter associated with the number of
Far End C-bit Code Violations,
in the previous 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.4 |
ncmhdmIntervalFarEndCESThe counter associated with the number of
Far End C-bit Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.5 |
ncmhdmIntervalFarEndCSESThe counter associated with the number of
Far End C-bit Severely Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.6 |
ncmhdmIntervalFarEndLUASFar End Line Unavailable Seconds. The counter associated
with the number of Seconds the Far End DS3 interface
was Out Of Service in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.7 |
ncmhdmIntervalLCVThe counter associated with the number of Line
Code Violations, a bipolar or excesive zero violation,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.8 |
ncmhdmIntervalLESLine Errored Second Total. The counter associated
with the number of Seconds of in which one or more
LCV occurred in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.9 |
ncmhdmIntervalLSESsThe counter associated with the number of
Line Severely Errored Seconds (LSES) in
the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.10 |
ncmhdmIntervalPCVThe counter associated with the number
of Parity Code Violations (locally calculated P-bits
disagree with those received),
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.11 |
ncmhdmIntervalPESThe counter associated with the number of Seconds
having at least one Parity Code Violation,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.12 |
ncmhdmIntervalPSESThe counter associated with the number of Seconds
having 44 or more Parity Code Violations,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.13 |
ncmhdmIntervalCCVThe counter associated with the number of
C-bit Code Violations,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.14 |
ncmhdmIntervalCESThe counter associated with the number of
C-bit Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.15 |
ncmhdmIntervalCSESThe counter associated with the number of
C-bit Severely Errored Seconds,
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.16 |
ncmhdmIntervalSEFSThe counter associated with the number of seconds
in which one or more Out of Frame occurred
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.17 |
ncmhdmIntervalAISSThe counter associated with the number of Seconds
in which one or more incoming AIS was detected
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.18 |
ncmhdmIntervalOOSSsThe counter associated with the number of Seconds
the DS3 interface was Out Of Service
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.19 |
ncmhdmIntervalLOSSsThe counter associated with the number of Seconds
Of system Loss Of Signal (LOS) in the current
15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.20 |
ncmhdmIntervalLOFSsThe counter associated with the number of Seconds
Of system Loss Of Frame (LOF) in the current
15 minute interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9004.1.21 |
ncmhdmTotalTableThe DS3/E3 Total table. SEQUENCE OF NcmhdmTotalEntry .1.3.6.1.4.1.321.1.3036.9005 |
ncmhdmTotalEntryAn entry in the DS3/E3 Total table. NcmhdmTotalEntry .1.3.6.1.4.1.321.1.3036.9005.1 |
ncmhdmTotalNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3036.9005.1.1 |
ncmhdmTotalIndexThe index value which uniquely identifies the
DS3/E3 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmhdmLineIndex object instance.ro INTEGER .1.3.6.1.4.1.321.1.3036.9005.1.2 |
ncmhdmTotalCRC4StatusCRC4 Status.ro Enumeration .1.3.6.1.4.1.321.1.3036.9005.1.3 |
ncmhdmTotalValidIntervThe number of valid intervals.ro INTEGER .1.3.6.1.4.1.321.1.3036.9005.1.4 |
ncmhdmTotalFarEndCCVThe counter associated with the number of
Far End C-bit Code Violations,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.5 |
ncmhdmTotalFarEndCESThe counter associated with the number of
Far End C-bit Errored Seconds,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.6 |
ncmhdmTotalFarEndCSESThe counter associated with the number of
Far End C-bit Severely Errored Seconds,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.7 |
ncmhdmTotalFarEndLUASFar End Line Unavailable Seconds. The counter associated
with the number of Seconds the Far End DS3 interface
was Out Of Service in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.8 |
ncmhdmTotalLCVThe counter associated with the number of Line
Code Violations, a bipolar or excesive zero violation,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.9 |
ncmhdmTotalLESLine Errored Second Total. The counter associated
with the number of Seconds of in which one or more
LCV occurred in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.10 |
ncmhdmTotalLSESsThe counter associated with the number of Seconds
Of Line Severely Errored Seconds (LSES) in the last
24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.11 |
ncmhdmTotalPCVThe counter associated with the number
of Parity Code Violations (locally calculated P-bits
disagree with those received),
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.12 |
ncmhdmTotalPESThe counter associated with the number of Seconds
having at least one Parity Code Violation,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.13 |
ncmhdmTotalPSESThe counter associated with the number of Seconds
having 44 or more Parity Code Violations,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.14 |
ncmhdmTotalCCVThe counter associated with the number of
C-bit Code Violations,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.15 |
ncmhdmTotalCESThe counter associated with the number of
C-bit Errored Seconds,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.16 |
ncmhdmTotalCSESThe counter associated with the number of
C-bit Severely Errored Seconds,
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.17 |
ncmhdmTotalSEFSThe counter associated with the number of seconds
in which one or more Out of Frame occurred
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.18 |
ncmhdmTotalAISSThe counter associated with the number of Seconds
in which one or more incoming AIS was detected
in the last 24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.19 |
ncmhdmTotalOOSSsThe counter associated with the number of Seconds
the DS3 interface was Out Of Service in the last 24
hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.20 |
ncmhdmTotalLOSSsThe counter associated with the number of Seconds
Of system Loss Of Signal (LOS) in the last
24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.21 |
ncmhdmTotalLOFSsThe counter associated with the number of Seconds
Of system Loss Of Frame (LOF) in the last
24 hour interval.ro Gauge .1.3.6.1.4.1.321.1.3036.9005.1.22 |
ncmDs3PerformanceSnapShotTable SEQUENCE OF NcmDs3PerformanceSnapShotEntry .1.3.6.1.4.1.321.1.3036.9006 |
ncmDs3PerformanceSnapShotEntryAn entry in the Ds3 Performance Snap Shot Entry table. NcmDs3PerformanceSnapShotEntry .1.3.6.1.4.1.321.1.3036.9006.1 |
ncmDs3SnapShotNIDIndexThe object specifies the node id index of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3036.9006.1.1 |
ncmDs3SnapShotIndexThe index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a LineIndex
object instance.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3036.9006.1.2 |
ncmDs3SnapShotCRC4StatusCRC4 Status.ro Enumeration .1.3.6.1.4.1.321.1.3036.9006.1.3 |
ncmDs3SnapShotThe variable specifies the option to initiate snap shot
command.rw Enumeration .1.3.6.1.4.1.321.1.3036.9006.1.4 |
ncmDs3TimeStampSecThe variable specifies the Time Stamp in Seconds .ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3036.9006.1.5 |
ncmDs3TimeStampMilliSecThe variable specifies the Time Stamp in milli Seconds .ro INTEGER .1.3.6.1.4.1.321.1.3036.9006.1.6 |
ncmDs3SnapShotSecsThe variable specifies number of seconds in the current interval.ro INTEGER .1.3.6.1.4.1.321.1.3036.9006.1.7 |
ncmDs3ResetPerfRegReset Performance Monitoring registers.rw Enumeration .1.3.6.1.4.1.321.1.3036.9006.1.8 |
ncmhdmTCAQtrTableThe quarter hour Alert Threshold Table. SEQUENCE OF NcmhdmTCAQtrEntry .1.3.6.1.4.1.321.1.3036.9007 |
ncmhdmTCAQtrEntryAn entry in the DS3/E3 table. NcmhdmTCAQtrEntry .1.3.6.1.4.1.321.1.3036.9007.1 |
ncmhdmTCAQtrNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3036.9007.1.1 |
ncmhdmTCAQtrIndexThe index value which uniquely identifies the
alert crossing threshold interface to which
this entry is applicable. The interface
identified by a particular value of this
index is the same interface as identified
by the same value an plcpLineIndex object
instance.ro INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.2 |
ncmhdmTCAQtrDs3FarEndCCVThe performance alert threshold for DS3
layer Far End C-bit Code Violation in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.3 |
ncmhdmTCAQtrDs3FarEndCESThe performance alert threshold for DS3
Far End C-bit Errored Seconds,
in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.4 |
ncmhdmTCAQtrDs3FarEndCSESThe performance alert threshold for DS3
Far End C-bit Severely Errored Seconds,
in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.5 |
ncmhdmTCAQtrDs3FarEndLUASThe performance alert threshold for DS3 layer
Far End Line Unavailable Seconds in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.6 |
ncmhdmTCAQtrDs3LCVThe performance alert threshold for DS3
layer Line code Violation in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.7 |
ncmhdmTCAQtrDs3LESThe performance alert threshold for DS3
layer Line Errored Second in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.8 |
ncmhdmTCAQtrDs3LSESsThe performance alert threshold for DS3
layer Line Severely Errored Second
in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.9 |
ncmhdmTCAQtrDs3PCVThe performance alert threshold for DS3
layer Parity Code Violation in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.10 |
ncmhdmTCAQtrDs3PESThe performance alert threshold for DS3
layer Parity Errored Second in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.11 |
ncmhdmTCAQtrDs3PSESThe performance alert threshold for DS3
layer Parity Severely Errored Second in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.12 |
ncmhdmTCAQtrDs3CCVThe performance alert threshold for DS3
layer C-bit Code Violation in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.13 |
ncmhdmTCAQtrDs3CESThe performance alert threshold for DS3
Far End C-bit Errored Seconds,
layer Errored Second in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.14 |
ncmhdmTCAQtrDs3CSESThe performance alert threshold for DS3
layer C-bit Severely Errored Second in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.15 |
ncmhdmTCAQtrDs3SEFSThe performance alert threshold for DS3
layer Severely Errored Framing Seconds
in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.16 |
ncmhdmTCAQtrDs3AISSThe performance alert threshold for DS3
layer Alarm Indication Signal Second
in 1/4 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.17 |
ncmhdmTCAQtrDs3LUASsThe performance alert threshold for DS3
layer Unavailable Second in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.18 |
ncmhdmTCAQtrDs3LOSSsThe performance alert threshold for DS3
Loss of Signal (LOS) Seconds in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.19 |
ncmhdmTCAQtrDs3LOFSsThe performance alert threshold for DS3
Loss of Frame (LOF) Seconds in 1/4 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9007.1.20 |
ncmhdmTCADayTableThe 24 hour Alert Threshold Table. SEQUENCE OF NcmhdmTCADayEntry .1.3.6.1.4.1.321.1.3036.9008 |
ncmhdmTCADayEntryAn entry in the 24 hour Alert Threshold Table. NcmhdmTCADayEntry .1.3.6.1.4.1.321.1.3036.9008.1 |
ncmhdmTCADayNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3036.9008.1.1 |
ncmhdmTCADayIndexThe index value which uniquely identifies the
alert crossing threshold interface to which
this entry is applicable. The interface
identified by a particular value of this
index is the same interface as identified
by the same value an plcpLineIndex object
instance.ro INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.2 |
ncmhdmTCADayDs3FarEndCCVThe performance alert threshold for DS3
layer Far End C-bit Code Violation in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.3 |
ncmhdmTCADayDs3FarEndCESThe performance alert threshold for DS3
Far End C-bit Errored Seconds,
in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.4 |
ncmhdmTCADayDs3FarEndCSESThe performance alert threshold for DS3
Far End C-bit Severely Errored Seconds,
in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.5 |
ncmhdmTCADayDs3FarEndLUASThe performance alert threshold for DS3 layer
Far End Line Unavailable Seconds in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.6 |
ncmhdmTCADayDs3LCVThe performance alert threshold for DS3
layer Line code Violation in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.7 |
ncmhdmTCADayDs3LESThe performance alert threshold for DS3
layer Line Errored Second in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.8 |
ncmhdmTCADayDs3LSESsThe performance alert threshold for DS3
layer Line Severely Errored Second
in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.9 |
ncmhdmTCADayDs3PCVThe performance alert threshold for DS3
layer Parity Code Violation in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.10 |
ncmhdmTCADayDs3PESThe performance alert threshold for DS3
layer Parity Errored Second in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.11 |
ncmhdmTCADayDs3PSESThe performance alert threshold for DS3
layer Parity Severely Errored Second in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.12 |
ncmhdmTCADayDs3CCVThe performance alert threshold for DS3
layer C-bit Code Violation in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.13 |
ncmhdmTCADayDs3CESThe performance alert threshold for DS3
C-bit Errored Seconds, in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.14 |
ncmhdmTCADayDs3CSESThe performance alert threshold for DS3
C-bit Severely Errored Seconds, in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.15 |
ncmhdmTCADayDs3SEFSThe performance alert threshold for DS3
layer Severely Errored Framing Seconds
in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.16 |
ncmhdmTCADayDs3AISSThe performance alert threshold for DS3
layer Alarm Indication Signal Second
in 24 hour boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.17 |
ncmhdmTCADayDs3LUASsThe performance alert threshold for DS3
layer Unavailable Second in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.18 |
ncmhdmTCADayDs3LOSSsThe performance alert threshold for DS3
Loss of Signal (LOS) Seconds in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.19 |
ncmhdmTCADayDs3LOFSsThe performance alert threshold for DS3
Loss of Frame (LOF) Seconds in 24 hour
boundary.rw INTEGER .1.3.6.1.4.1.321.1.3036.9008.1.20 |
ncmhdmTxAlarmTableDS3 Transmit alarm Table. SEQUENCE OF NcmhdmTxAlarmEntry .1.3.6.1.4.1.321.1.3036.9009 |
ncmhdmTxAlarmEntryAn entry in the DS3/E3 Transmit Alarm table. NcmhdmTxAlarmEntry .1.3.6.1.4.1.321.1.3036.9009.1 |
ncmhdmTxAlarmNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3036.9009.1.1 |
ncmhdmTxAlarmIndexThe index value which uniquely identifies the
Transmit Alarm interface to which
this entry is applicable. The interface
identified by a particular value of this
index is the same interface as identified
by the same value an Dsx3LineIndex object
instance.ro INTEGER .1.3.6.1.4.1.321.1.3036.9009.1.2 |
ncmhdmTxYellowAlarmTransmit the near-end yellow alarm.rw Enumeration .1.3.6.1.4.1.321.1.3036.9009.1.3 |
ncmhdmTxAISTransmit the near-end AIS alarm.rw Enumeration .1.3.6.1.4.1.321.1.3036.9009.1.4 |
ncmhdmTxIdleSignalTransmit the near-end Idle alarm.rw Enumeration .1.3.6.1.4.1.321.1.3036.9009.1.5 |
ncmhdmTxFEBENear end unit transmits the FEBE alarm.rw Enumeration .1.3.6.1.4.1.321.1.3036.9009.1.6 |
ncmhdmTxFEACAlarmThis object describes which, if any, FEAC
Alarm is enabled.rw Enumeration .1.3.6.1.4.1.321.1.3036.9009.1.7 |
ncmhdmDs3StatTableThe HDM Ds3 Stats. SEQUENCE OF NcmhdmDs3StatEntry .1.3.6.1.4.1.321.1.3036.9010 |
ncmhdmDs3StatEntryAn entry in the ds3 stats table. NcmhdmDs3StatEntry .1.3.6.1.4.1.321.1.3036.9010.1 |
ncmhdmDs3StatNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3036.9010.1.1 |
ncmhdmDs3StatIndexThe index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance.ro INTEGER .1.3.6.1.4.1.321.1.3036.9010.1.2 |
ncmhdmDs3StatAISPort Status AIS off/on.ro Enumeration .1.3.6.1.4.1.321.1.3036.9010.1.3 |
ncmhdmDs3StatIdleport Status Idle off/on.ro Enumeration .1.3.6.1.4.1.321.1.3036.9010.1.4 |
ncmhdmDs3StatYellowAlmPort Status Yellow Alarm off/on.ro Enumeration .1.3.6.1.4.1.321.1.3036.9010.1.5 |
ncmhdmDs3StatFrameLossoff/on.ro Enumeration .1.3.6.1.4.1.321.1.3036.9010.1.6 |
ncmhdmDs3StatSigLossPort Status Signal Loss off/on.ro Enumeration .1.3.6.1.4.1.321.1.3036.9010.1.7 |
ncmhdmDs3StatPLCPYellowPort Status PLCP Yellow Alarm off/on.ro Enumeration .1.3.6.1.4.1.321.1.3036.9010.1.8 |
ncmhdmDs3StatPLCPFrmLossPort Status PLCP Frame Loss off/on.ro Enumeration .1.3.6.1.4.1.321.1.3036.9010.1.9 |
ncmhdmDs3StatPLCPOOFPort Status PLCP Out of Frame off/on.ro Enumeration .1.3.6.1.4.1.321.1.3036.9010.1.10 |
ncmhdmDs3LpbkLocalLocal Loopback enabled/disabled.ro Enumeration .1.3.6.1.4.1.321.1.3036.9010.1.11 |
ncmhdmDs3LpbkPayloadPayload Loopback enabled/disabled.ro Enumeration .1.3.6.1.4.1.321.1.3036.9010.1.12 |
ncmhdmDs3LpbkFEACFEAC Loopback enabled/disabled.ro Enumeration .1.3.6.1.4.1.321.1.3036.9010.1.13 |
ncmhdmDs3LpbkFarEndFar end Loopback enabled/disabled.ro Enumeration .1.3.6.1.4.1.321.1.3036.9010.1.14 |
ncmhdmds3LPBKTableThe DS3/E3 Current table. SEQUENCE OF Ncmhdmds3LPBKEntry .1.3.6.1.4.1.321.1.3036.9011 |
ncmhdmds3LPBKEntryAn entry in the DS3 Loopback table. Ncmhdmds3LPBKEntry .1.3.6.1.4.1.321.1.3036.9011.1 |
ncmhdmLPBKNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3036.9011.1.1 |
ncmhdmds3LPBKIndexThe index value which uniquely identifies the
DS3/E3 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
ncmhdmLineIndex object instance.ro INTEGER .1.3.6.1.4.1.321.1.3036.9011.1.2 |
ncmhdmDs3LPBKActivationDs3 Loopback enabled/disabled, and Ds3 Loopback Type.rw Enumeration .1.3.6.1.4.1.321.1.3036.9011.1.3 |
ncmhdmDs3PortEntryAn entry in the dsu information table. NcmhdmDs3PortEntry .ncmhdmDs3PortTable.1 |
ncmhdmDs3PortNIDIndexThis variable indicates the node id value of the node.ro INTEGER (1..'7fffffff'h) .ncmhdmDs3PortTable.1.1 |
ncmhdmDs3PortIndexThe index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance.ro INTEGER .ncmhdmDs3PortTable.1.2 |
ncmhdmDs3PerfControlPerformance Control Enabled/Disabled.rw Enumeration .ncmhdmDs3PortTable.1.3 |
ncmhdmDs3LBOSelectionSelect the length of DS3 cable to be Normal
(0-255 feet) or Long cable (225-450 feet).rw Enumeration .ncmhdmDs3PortTable.1.4 |
ncmhdmDs3DataRateModeData Rate Mode.rw Enumeration .ncmhdmDs3PortTable.1.5 |
ncmhdmDs3Ratethe date rate fro ds3 .rw INTEGER .ncmhdmDs3PortTable.1.6 |
ncmhdmDs3LineTypeLine Type.rw Enumeration .ncmhdmDs3PortTable.1.7 |
ncmhdmDs3LineCodeLine Code.rw Enumeration .ncmhdmDs3PortTable.1.8 |
ncmhdmDs3AISCBitAISCBit.rw Enumeration .ncmhdmDs3PortTable.1.9 |
ncmhdmDs3EquipCodeThis is the Far End Equipment Identification code
that describes the specific piece of equipment.
It is sent within the Path
Identification Message.rw DisplayString .ncmhdmDs3PortTable.1.10 |
ncmhdmDs3LocationIDCodeThis is the Far End Location Identification code
that describes the specific location of the
equipment. It is sent within the Path
Identification Message.rw DisplayString .ncmhdmDs3PortTable.1.11 |
ncmhdmDs3FrameIDCodeThis is the Far End Frame Identification code
that identifies where the equipment is located
within a building at a given location.
It is sent within the Path Identification Message.rw DisplayString .ncmhdmDs3PortTable.1.12 |
ncmhdmDs3UnitCodeThis is the Far End code
that identifies the equipment location within a bay.
It is sent within the Path
Identification Message.rw DisplayString .ncmhdmDs3PortTable.1.13 |
ncmhdmDs3FacilityIDCodeThis code identifies a specific Far End DS3 path.
It is sent within the Path Identification Message.rw DisplayString .ncmhdmDs3PortTable.1.14 |
ncmhdmDs3PortIdCodePort ID.rw DisplayString .ncmhdmDs3PortTable.1.15 |
ncmhdmDs3CircuitIDCircuit ID.rw DisplayString .ncmhdmDs3PortTable.1.16 |
ncmhdmDs3GenIDCodeTest Signal Generator ID.rw DisplayString .ncmhdmDs3PortTable.1.17 |
ncmhdmDs3InbandInband signalling control.rw Enumeration .ncmhdmDs3PortTable.1.18 |