IPAD-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for IPAD-MIB.
284
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
284 total| Object Name |
|---|
verilink OBJECT IDENTIFIER .1.3.6.1.4.1.321 |
RFC1155-SMI Unknown .1.3.6.1.4.1.321 |
hbu OBJECT IDENTIFIER .1.3.6.1.4.1.321.100 |
ipadFrPortRxInvalidFramesExceededThis trap is sent out when an ipad frame relay
port receive invalid frames alarm threshold has
been exceeded. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25000 |
ipadFrPortRxThroughputExceededThis trap is sent out when an ipad frame relay
port receive throughput threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25001 |
ipadFrPortTxThroughputExceededThis trap is sent out when an ipad frame relay
port transmit throughput threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25002 |
ipadDLCItxCIRexceededThis trap is sent out when the Tx over CIR threshold
has been exceeded. This threshold is the number of
frames in excess of CIR. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25003 |
ipadDLCItxBEexceededThis trap is sent out when the Tx over Be threshold
has been exceeded. This threshold is the number of
frames in excess of Be. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25004 |
ipadDLCIRxCongestionExceededThis trap is sent out when the Rx congestion threshold
has been exceeded. This threshold is the number of
frames received with BECN/FECN. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25005 |
ipadUserTxExceededThis trap is sent out when the Tx throughput threshold
in bits per second has been exceeded. This threshold
represents the number of bits for the user-selected
protocol. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25006 |
ipadDlciRxBECNinCIRAlarmThis trap is sent out when a frame with BECN set has
been received within CIR. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25007 |
ipadDlciUASExceededThis trap is sent out when the UAS (unavailable seconds)
threshold for the DLCI has been exceeded. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25008 |
ipadserialDteDTRAlarmExistsThis trap is sent out when a DTR Loss alarm is declared. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25009 |
ipadt1e1ESAlarmDeclaredThis trap is sent out when an Errored Seconds
alarm is declared. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25010 |
ipadt1e1SESAlarmDeclaredThis trap is sent out when a Severely Errored Seconds
alarm is declared. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25011 |
ipadt1e1LOSSAlarmDeclaredThis trap is sent out when a Loss of Signal Seconds
alarm is declared. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25012 |
ipadt1e1UASAlarmDeclaredThis trap is sent out when an Unavailable Seconds
alarm is declared. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25013 |
ipadt1e1CSSAlarmDeclaredThis trap is sent out when a Controlled Slip Seconds
alarm is declared. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25014 |
ipadt1e1BPVSAlarmDeclaredThis trap is sent out when a Bipolar Violation Seconds
alarm is declared. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25015 |
ipadt1e1OOFSAlarmDeclaredThis trap is sent out when an Out of Frame Seconds
alarm is declared. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25016 |
ipadt1e1AISAlarmExistsThis trap is sent out when an Alarm Indication Signal
alarm is declared. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25017 |
ipadt1e1RASAlarmExistsThis trap is sent out when a Remote Alarm Signal
alarm is declared. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25018 |
ipadDLCIremoteSOSAlarmThis trap is sent when the remote unit for a
DLCI senses and reports an SOS condition. TRAP-TYPE .1.3.6.1.4.1.321.100.0.25019 |
ipad OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1 |
ipadFrPort OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.1 |
ipadFrPortTableTable of frame relay port parameters. SEQUENCE OF IpadFrPortTableEntry .1.3.6.1.4.1.321.100.1.1.1 |
ipadFrPortTableEntryAn entry in the ipad frame relay port table. IpadFrPortTableEntry .1.3.6.1.4.1.321.100.1.1.1.1 |
ipadFrPortServiceIndex into the ipad frame relay port table;
an entry in the ipad service table.ro INTEGER .1.3.6.1.4.1.321.100.1.1.1.1.1 |
ipadFrPortActiveSpecifies if the port is active.ro Enumeration .1.3.6.1.4.1.321.100.1.1.1.1.2 |
ipadFrPortLMITypeSpecifies the link management information
type used on this port.ro Enumeration .1.3.6.1.4.1.321.100.1.1.1.1.3 |
ipadFrPortLMIModeSpecifies the link management information
mode used on this port.ro Enumeration .1.3.6.1.4.1.321.100.1.1.1.1.4 |
ipadFrPortRxInvAlmThresholdSets the rx invalid frames alarm threshold.
Setting this field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.1.1.1.5 |
ipadFrPortRxInvAlmAlarmReports if the invalid frames threshold has
been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.1.1.1.6 |
ipadFrPortTxAlmThresholdSets the tx throughput alarm threshold (in octets/second).
Setting this field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.1.1.1.7 |
ipadFrPortTxAlmAlarmReports if the tx throughput threshold has
been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.1.1.1.8 |
ipadFrPortRxAlmThresholdSets the rx throughput alarm threshold (in octets/second).
Setting this field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.1.1.1.9 |
ipadFrPortRxAlmAlarmReports if the rx throughput threshold has
been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.1.1.1.10 |
ipadService OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.2 |
ipadServiceTableThe ipad service table. SEQUENCE OF IpadServiceTableEntry .1.3.6.1.4.1.321.100.1.2.1 |
ipadServiceTableEntryAn entry in the ipad service table. IpadServiceTableEntry .1.3.6.1.4.1.321.100.1.2.1.1 |
ipadServiceIndexThe index for the ipad service table.ro INTEGER .1.3.6.1.4.1.321.100.1.2.1.1.1 |
ipadServiceifIndexThe MIB-II ifIndex for this service.rw Enumeration .1.3.6.1.4.1.321.100.1.2.1.1.2 |
ipadServiceTypeThe type of this service.rw Enumeration .1.3.6.1.4.1.321.100.1.2.1.1.3 |
ipadServicePairAn entry in this table, which establishes a service pairing.rw INTEGER .1.3.6.1.4.1.321.100.1.2.1.1.4 |
ipadServiceAddServiceAdds a row to the Service Table.rw Enumeration .1.3.6.1.4.1.321.100.1.2.2 |
ipadServiceDeleteServiceIdentifies a Service to be deleted; an index into the Service Table.rw INTEGER .1.3.6.1.4.1.321.100.1.2.3 |
ipadChannel OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.3 |
ipadChannelTableThe ipad channel table. SEQUENCE OF IpadChannelTableEntry .1.3.6.1.4.1.321.100.1.3.1 |
ipadChannelTableEntryAn entry in the ipad channel table. IpadChannelTableEntry .1.3.6.1.4.1.321.100.1.3.1.1 |
ipadChannelifIndexPrimary index into ipad channel table, MIB-II ifIndex.ro Enumeration .1.3.6.1.4.1.321.100.1.3.1.1.1 |
ipadChannelIndexChannel index for the physical interface.ro INTEGER .1.3.6.1.4.1.321.100.1.3.1.1.2 |
ipadChannelServiceIndex into service table for this channel.rw INTEGER .1.3.6.1.4.1.321.100.1.3.1.1.3 |
ipadChannelPairPair for this channel; an entry in the channel
table. Use service pair in service table to
determine which service contains this channel.rw INTEGER .1.3.6.1.4.1.321.100.1.3.1.1.4 |
ipadChannelRateRate for this channel.rw Enumeration .1.3.6.1.4.1.321.100.1.3.1.1.5 |
ipadDLCI OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.4 |
ipadDLCITableThe ipad DLCI table. SEQUENCE OF IpadDLCITableEntry .1.3.6.1.4.1.321.100.1.4.1 |
ipadDLCITableEntryAn entry in the ipad DLCI table. IpadDLCITableEntry .1.3.6.1.4.1.321.100.1.4.1.1 |
ipadDLCIserviceAn index into the ipad service table.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.1 |
ipadDLCInumberThe DLCI number for this entry.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.2 |
ipadDLCIactiveSpecifies if the DLCI is active.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.3 |
ipadDLCIcongestionSpecifies if the dlci is receiving frames
with FECN or BECN bit set.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.4 |
ipadDLCIremoteRemote DLCI number.ro INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.5 |
ipadDLCIremoteUnitName of the remote DLCI.ro DisplayString( SIZE .1.3.6.1.4.1.321.100.1.4.1.1.6 |
ipadDLCIremoteEquipActiveReports if the equipment attached to the
remote unit is active.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.7 |
ipadDLCIencapsulationType of protocol encapsulation used on this DLCI.rw Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.8 |
ipadDLCIproprietaryWhen the encapsulation is proprietary, the traffic type must be
configured to gather protocol specific statistics.rw Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.9 |
ipadDLCIpropOffsetWhen the encapsulation is proprietary, this is the number of bytes
after the frame relay header to look for the specified protocol
decode.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.10 |
ipadDLCIinBandDetermines if frames on this DLCI will be parsed to look
for management frames destined for the unit itself.rw Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.11 |
ipadDLCICIRDefault committed information rate in bits per second.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.12 |
ipadDLCIBeDefault excess burst rate in bits per second.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.13 |
ipadDLCIminBCIf the corresponding interface is configured to enable
congestion management, the minimum transfer rate at which
the unit will throttle back offering data to the network.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.14 |
ipadDLCIrxMonDetermines if the SLA parameters will be monitored for received
frames.rw Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.15 |
ipadDLCIdEctrlDetermines if the Rx monitor will set the DE bit on all frames
received in excess of the CIR before they are switched to their
destination port.rw Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.16 |
ipadDLCIenableDelayEnable or disable delay.rw Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.17 |
ipadDLCItxExCIRThresholdSets the Tx over CIR alarm threshold. This threshold
is the number of octets per second in excess of CIR. Setting
this field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.18 |
ipadDLCItxExCIRAlarmReports if the Tx over CIR threshold has been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.19 |
ipadDLCItxExBeThresholdSets the Tx over Be alarm threshold. This threshold is the
number of octets per second in excess of Be. Setting this
field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.20 |
ipadDLCItxExBeAlarmReports if the Tx over Be threshold has been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.21 |
ipadDLCIrxCongThresholdSets the Rx congestion alarm threshold. This threshold
is the number of frames received with BECN/FECN. Setting
this field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.22 |
ipadDLCIrxCongAlarmReports if the Rx congestion threshold has been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.23 |
ipadDLCIrxBECNinCIRReports if BECN has been received within CIR.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.24 |
ipadDLCIUASThresholdSets the UAS (unavailable seconds) alarm threshold. This
threshold is the number of seconds passed that the DLCI is
unavailable. Setting this field to 0 disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.4.1.1.25 |
ipadDLCIUASAlarmReports if the UAS threshold has been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.4.1.1.26 |
ipadDLCILastChangeTime of the last change in the DLCI table.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.4.2 |
ipadEndpoint OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.5 |
ipadEndpointTableThe ipad endpoint table. SEQUENCE OF IpadEndpointTableEntry .1.3.6.1.4.1.321.100.1.5.1 |
ipadEndpointTableEntryAn entry in the ipad endpoint table. IpadEndpointTableEntry .1.3.6.1.4.1.321.100.1.5.1.1 |
ipadEndpointIndexThe index into the ipad endpoint table.ro INTEGER .1.3.6.1.4.1.321.100.1.5.1.1.1 |
ipadEndpointNameThe name for the endpoint.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.5.1.1.2 |
ipadEndpointServiceAn index into the ipad service table.rw INTEGER .1.3.6.1.4.1.321.100.1.5.1.1.3 |
ipadEndpointDLCInumberData link connection identifier for this endpoint;
The DLCI number for this entry.rw INTEGER .1.3.6.1.4.1.321.100.1.5.1.1.4 |
ipadEndpointTypeEndpoint type.rw Enumeration .1.3.6.1.4.1.321.100.1.5.1.1.5 |
ipadEndpointForwardIndex into the endpoint names table. This is the endpoint
on which data should be forwarded for switched endpoints.rw INTEGER .1.3.6.1.4.1.321.100.1.5.1.1.6 |
ipadEndpointBackupIndex into the endpoint table. This is the endpoint
on which data should be forwarded in the case where the
endpoint becomes inactive.rw INTEGER .1.3.6.1.4.1.321.100.1.5.1.1.7 |
ipadEndpointRefSLPIndex into the endpoint table. The service level parameters
can be copied from another configured endpoint.rw INTEGER .1.3.6.1.4.1.321.100.1.5.1.1.8 |
ipadEndpointRemoteIpAddrIP address for remote.rw IpAddress .1.3.6.1.4.1.321.100.1.5.1.1.9 |
ipadEndpointRemoteIpMaskIP address mask for remote.rw IpAddress .1.3.6.1.4.1.321.100.1.5.1.1.10 |
ipadEndpointAddEndpointIdentifies an Endpoint to be added.rw DisplayString( SIZE .1.3.6.1.4.1.321.100.1.5.2 |
ipadEndpointDeleteEndpointIdentifies an Endpoint to be deleted.rw DisplayString( SIZE .1.3.6.1.4.1.321.100.1.5.3 |
ipadEndpointLastChangeTime of the last change in the Endpoint table.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.5.4 |
ipadUser OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.6 |
ipadUserTableTable of user selected parameters. SEQUENCE OF IpadUserTableEntry .1.3.6.1.4.1.321.100.1.6.1 |
ipadUserTableEntryAn entry in the ipad user table. IpadUserTableEntry .1.3.6.1.4.1.321.100.1.6.1.1 |
ipadUserIndexIndex into the ipad user table.ro INTEGER .1.3.6.1.4.1.321.100.1.6.1.1.1 |
ipadUserFilterByDLCIEnables Service+DLCI filtering for this user statistic.rw Enumeration .1.3.6.1.4.1.321.100.1.6.1.1.2 |
ipadUserServiceSpecifies the service for this user type; identifies an entry in the
ipad DLCI table when combined with ipadUserDLCI. Meaningful when
ipadUserFilterByDLCI is enabled. Meaningless when collecting
PPP statistics.rw INTEGER .1.3.6.1.4.1.321.100.1.6.1.1.3 |
ipadUserDLCISpecifies the DLCI for this user type; identifies an entry in the
ipad DLCI table when combined with ipadUserService. Meaningful when
ipadUserFilterByDLCI is enabled. Meaningless when collecting
PPP statistics.rw INTEGER .1.3.6.1.4.1.321.100.1.6.1.1.4 |
ipadUserFilterByIPAddressEnables IP address filtering for this user statistic. A
packet is counted towards the user statistics if the
result of a bitwise-and of an IP address in a transmitted
packet with ipadUserIPMask equals ipadUserIPAddress.rw Enumeration .1.3.6.1.4.1.321.100.1.6.1.1.5 |
ipadUserIPAddressSpecifies the IP address for this user type.rw IpAddress .1.3.6.1.4.1.321.100.1.6.1.1.6 |
ipadUserIPMaskSpecifies the IP address mask for this user type.rw IpAddress .1.3.6.1.4.1.321.100.1.6.1.1.7 |
ipadUserFilterByIPPortEnables IP Port filtering for this user statistic.rw Enumeration .1.3.6.1.4.1.321.100.1.6.1.1.8 |
ipadUserIPPortSpecifies the IP port for this user type.rw Enumeration .1.3.6.1.4.1.321.100.1.6.1.1.9 |
ipadUserTxAlmThresholdSets the tx throughput alarm threshold in
octets per second. Setting this field to 0
disables the alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.6.1.1.10 |
ipadUserTxAlmAlarmReports if the tx throughput threshold has been exceeded.ro Enumeration .1.3.6.1.4.1.321.100.1.6.1.1.11 |
ipadUserIPStatTimeRemainingSpecifies seconds until the next IP TopN report is generated.rw INTEGER .1.3.6.1.4.1.321.100.1.6.2 |
ipadUserIPStatTimeDurationThe value of TimeRemaining when TimeRemaining was last set. Indicates
the number of seconds that the next IP TopN report will cover.ro INTEGER .1.3.6.1.4.1.321.100.1.6.3 |
ipadUserIPStatStartTimeThe value of SysUpTime when TimeRemaining was last set.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.6.4 |
ipadUserIPStatRequestedReportSizeDetermines the requested maximum number of entries in the
topN report.rw INTEGER .1.3.6.1.4.1.321.100.1.6.5 |
ipadUserIPStatGrantedReportSizeDetermines the granted number of entries in the
topN report. This is by definition less than or equal
to requested report size.ro INTEGER .1.3.6.1.4.1.321.100.1.6.6 |
ipadUserIPStatReportNumberSpecifies the number of reports that have been generated.
This value resets to zero when the unit is restarted.ro INTEGER .1.3.6.1.4.1.321.100.1.6.7 |
ipadUserIPStatDiscardTypeThe internal table used to track TopN statistics is
finite in size. On the condition when the internal table
is full and a new IP address is encountered, an element
already existing in the table must be removed. This
variable determines the manner of selection. Writing
byTime(1) will cause the entry with the least recent
frame to be discarded. That is, all other entries in the
table will have transmitted or received at least one packet
more recently. Writing byFrames(2) will select the entry
with the fewest transmitted or received frames. Writing
byOctets(3) will select the entry with the fewest transmitted
or received octets. The default is byTime(1).rw Enumeration .1.3.6.1.4.1.321.100.1.6.8 |
ipadPPP OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.7 |
ipadPPPCfgTableThe ipad PPP configuration table. SEQUENCE OF IpadPPPCfgTableEntry .1.3.6.1.4.1.321.100.1.7.1 |
ipadPPPCfgTableEntryAn entry in the ipad PPP configuration table. IpadPPPCfgTableEntry .1.3.6.1.4.1.321.100.1.7.1.1 |
ipadPPPCfgServiceThe index into the PPP configuration table;
an entry in the ipad service table.ro INTEGER .1.3.6.1.4.1.321.100.1.7.1.1.1 |
ipadPPPCfgDialModeDetermines the permancency of a communications connection.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.2 |
ipadPPPCfgInactivityTimerDetermines when a dial-up or demand-dial connection will be
disconnected due to inactivity in both directions. When this
parameter is set to zero then the timer is disabled.rw INTEGER .1.3.6.1.4.1.321.100.1.7.1.1.3 |
ipadPPPCfgNegotiationInitDetermines if the port waits for the other end to initiate
parameter negotiations.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.4 |
ipadPPPCfgMRUThe maximum receive unit the interface will accept. Valid values
are in the range 128 - 4096, default is 1500.rw INTEGER .1.3.6.1.4.1.321.100.1.7.1.1.5 |
ipadPPPCfgACCMSets the async control character map used when generating
async HDLC frames. Setting a bit in the map causes the
corresponding character to be mapped for transparency.rw INTEGER .1.3.6.1.4.1.321.100.1.7.1.1.6 |
ipadPPPCfgNegMRUDetermines if MRU size is negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.7 |
ipadPPPCfgNegACCMDetermines if ACCM is negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.8 |
ipadPPPCfgNegMagicDetermines if the magic number is negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.9 |
ipadPPPCfgNegCompressionDetermines if the PPP protocol header compression is negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.10 |
ipadPPPCfgNegAddressDetermines if the PPP HDLC header compression is negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.11 |
ipadPPPCfgNegPAPDetermines if PAP is negotiated with the peer when a more secure
authentication protocol is rejected.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.12 |
ipadPPPCfgNegCHAPDetermines if CHAP is negotiated with the peer when a more secure
authentication protocol is rejected.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.13 |
ipadPPPCfgAllowPAPDetermines if PAP is allowed to be negotiated by the peer.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.14 |
ipadPPPCfgAllowCHAPDetermines if CHAP is allowed to be negotiated by the peer.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.15 |
ipadPPPCfgPAPUsernameIdentification string to determine the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.1.1.16 |
ipadPPPCfgPAPPasswordPassword string to validate the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.1.1.17 |
ipadPPPCfgCHAPUsernameIdentification string to determine the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.1.1.18 |
ipadPPPCfgCHAPSecretPassword string to validate the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.1.1.19 |
ipadPPPCfgPortIpAddressSets the IP address of the unit's port.rw IpAddress .1.3.6.1.4.1.321.100.1.7.1.1.20 |
ipadPPPCfgPeerIpAddressSets the IP address of the unit's peer.rw IpAddress .1.3.6.1.4.1.321.100.1.7.1.1.21 |
ipadPPPCfgNegIpAddressDetermines if IP addresses are dynamically negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.22 |
ipadPPPCfgNegIPCPCompressionDetermines if Van Jacobson TCPIP header compression is negotiated.rw Enumeration .1.3.6.1.4.1.321.100.1.7.1.1.23 |
ipadPPPCfgSubnetMaskSpecifies the subnet mask.rw IpAddress .1.3.6.1.4.1.321.100.1.7.1.1.24 |
ipadPPPCfgAuthChallengeIntervalSpecifies the authentication challenge interval.rw INTEGER .1.3.6.1.4.1.321.100.1.7.1.1.25 |
ipadPPPPAPTableTable of PAP authentication parameters. SEQUENCE OF IpadPPPPAPTableEntry .1.3.6.1.4.1.321.100.1.7.2 |
ipadPPPPAPTableEntryAn entry in the ipad PPP PAP table. IpadPPPPAPTableEntry .1.3.6.1.4.1.321.100.1.7.2.1 |
ipadPPPPAPTableIndexThe index into the PPP PAP association table.ro INTEGER .1.3.6.1.4.1.321.100.1.7.2.1.1 |
ipadPPPPAPTableUsernameIdentification string to identify the user.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.2.1.2 |
ipadPPPPAPTablePasswordPassword string to validate the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.2.1.3 |
ipadPPPCHAPTableTable of CHAP authentication parameters. SEQUENCE OF IpadPPPCHAPTableEntry .1.3.6.1.4.1.321.100.1.7.3 |
ipadPPPCHAPTableEntryAn entry in the ipad PPP CHAP table. IpadPPPCHAPTableEntry .1.3.6.1.4.1.321.100.1.7.3.1 |
ipadPPPCHAPTableIndexThe index into the PPP CHAP association table.ro INTEGER .1.3.6.1.4.1.321.100.1.7.3.1.1 |
ipadPPPCHAPTableUsernameIdentification string to identify the user.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.3.1.2 |
ipadPPPCHAPTableSecretPassword string to validate the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.7.3.1.3 |
ipadModem OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.8 |
ipadModemDialTableTable of modem dialing parameters. SEQUENCE OF IpadModemDialTableEntry .1.3.6.1.4.1.321.100.1.8.1 |
ipadModemDialTableEntryAn entry in the ipad modem dialing parameters table. IpadModemDialTableEntry .1.3.6.1.4.1.321.100.1.8.1.1 |
ipadModemDialTableIndexThe index into the ipad modem dialing parameters table.
Equivalent to MIB-II ifIndex.ro Enumeration .1.3.6.1.4.1.321.100.1.8.1.1.1 |
ipadModemDialDataIndexAn index into the Modem Data Table, which selects a modem.rw INTEGER .1.3.6.1.4.1.321.100.1.8.1.1.2 |
ipadModemDialNumberSpecifies the telephone number to dial.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.1.1.3 |
ipadModemDialAbortTimerAborts a connection attempt if an initialed dial-up
connection has failed to connect within the specified
number of seconds. Range is 1..255.rw INTEGER .1.3.6.1.4.1.321.100.1.8.1.1.4 |
ipadModemDialRedialAttemptsDetermines how many attempts to initiate a dial-up
connection after the initial failure. Range is 0..10.rw INTEGER .1.3.6.1.4.1.321.100.1.8.1.1.5 |
ipadModemDialDelayBeforeRedialSpecifies the number of seconds to wait before
redialing. Range is 1..255.rw INTEGER .1.3.6.1.4.1.321.100.1.8.1.1.6 |
ipadModemDialLoginScriptScript string interpreted after a dial-up
connection is first established.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.1.1.7 |
ipadModemDialUsernameIdentification string to determine the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.1.1.8 |
ipadModemDialPasswordPassword string to validate the user identity.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.1.1.9 |
ipadModemDataTableTable of modem database parameters. SEQUENCE OF IpadModemDataTableEntry .1.3.6.1.4.1.321.100.1.8.2 |
ipadModemDataTableEntryAn entry in the ipad modem database parameters table. IpadModemDataTableEntry .1.3.6.1.4.1.321.100.1.8.2.1 |
ipadModemDataTableIndexThe index into the ipad modem database parameters table.ro INTEGER .1.3.6.1.4.1.321.100.1.8.2.1.1 |
ipadModemDataModemNameIdentification string for the modem database.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.2 |
ipadModemDataSetupScriptScript interpreted when a modem port is first started.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.3 |
ipadModemDataDialingScriptScript interpreted when a dial-up connection
is initiated.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.4 |
ipadModemDataAnswerScriptScript interpreted when a modem port is waiting
for an incoming call.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.5 |
ipadModemDataHangupScriptScript interpreted when a dial-up connection
is no longer needed.rw DisplayString ( SIZE .1.3.6.1.4.1.321.100.1.8.2.1.6 |
ipadSvcAware OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.9 |
ipadFrPortStatsTablePort statistics. SEQUENCE OF IpadFrPortStatsEntry .1.3.6.1.4.1.321.100.1.9.1 |
ipadFrPortStatsEntryAn entry in the service aware ports statistics table. IpadFrPortStatsEntry .1.3.6.1.4.1.321.100.1.9.1.1 |
ipadFrPortStatsServicePort index in the ipadFrPortStats table;
an entry in the ipad service table.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.1 |
ipadFrPortStatsPeriodThe index into the port stats 24-hour table.ro Enumeration .1.3.6.1.4.1.321.100.1.9.1.1.2 |
ipadFrPortStatsTxFramesNumber of transmitted frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.3 |
ipadFrPortStatsRxFramesNumber of received frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.4 |
ipadFrPortStatsTxOctetsNumber of transmitted octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.5 |
ipadFrPortStatsRxOctetsNumber of received octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.6 |
ipadFrPortStatsTxMgmtFramesNumber of transmitted management frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.7 |
ipadFrPortStatsRxMgmtFramesNumber of received management frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.8 |
ipadFrPortStatsTxMgmtOctetsNumber of transmitted management octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.9 |
ipadFrPortStatsRxMgmtOctetsNumber of received management octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.10 |
ipadFrPortStatsRxFECNNumber of received frames with FECN set for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.11 |
ipadFrPortStatsRxBECNNumber of received frames with BECN set for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.12 |
ipadFrPortStatsRxInvalidNumber of invalid received frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.13 |
ipadFrPortStatsTxStatInqNumber of transmitted status inquiry frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.14 |
ipadFrPortStatsRxStatInqNumber of received status inquiry frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.15 |
ipadFrPortStatsTxStatRespNumber of transmitted status response frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.16 |
ipadFrPortStatsRxStatRespNumber of received status response frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.17 |
ipadFrPortStatsRxInvLMINumber of received frames with an invalid LMI for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.18 |
ipadFrPortStatsPeakPeak throughput rate for the period (in octets/second).ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.19 |
ipadFrPortStatsAverageAverage throughput rate for the period (in octets/second).ro INTEGER .1.3.6.1.4.1.321.100.1.9.1.1.20 |
ipadDLCIstatsTablePort statistics. SEQUENCE OF IpadDLCIstatsEntry .1.3.6.1.4.1.321.100.1.9.2 |
ipadDLCIstatsEntryAn entry in the service aware DLCI statistics table. IpadDLCIstatsEntry .1.3.6.1.4.1.321.100.1.9.2.1 |
ipadDLCIstatsServiceThe service index for the service aware stats table; identifies an
entry in the ipad DLCI table when combined with ipadDLCIstatsDLCI.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.1 |
ipadDLCIstatsDLCIThe DLCI index for the service aware stats table; identifies an
entry in the ipad DLCI table when combined with ipadDLCIstatsService.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.2 |
ipadDLCIstatsPeriodThe index into the DLCI stats 24-hour table.ro Enumeration .1.3.6.1.4.1.321.100.1.9.2.1.3 |
ipadDLCIstatsTxFramesThe number of transmitted frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.4 |
ipadDLCIstatsRxFramesThe number of received frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.5 |
ipadDLCIstatsTxOctetsThe number of transmitted octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.6 |
ipadDLCIstatsRxOctetsThe number of received octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.7 |
ipadDLCIstatsRxFECNThe number of received frames with FECN set for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.8 |
ipadDLCIstatsRxBECNThe number of received frames with BECN set for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.9 |
ipadDLCIstatsRxDEThe number of received frames with DE bit set for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.10 |
ipadDLCIstatsTxExcessCIRThe number of transmitted octets in excess of CIR for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.11 |
ipadDLCIstatsTxExcessBeThe number of transmitted octets in excess of Be for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.12 |
ipadDLCIstatsTxMgmtFramesThe number of transmitted management frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.13 |
ipadDLCIstatsRxMgmtFramesThe number of received management frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.14 |
ipadDLCIstatsTxMgmtOctetsThe number of transmitted management octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.15 |
ipadDLCIstatsRxMgmtOctetsThe number of received management octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.16 |
ipadDLCIstatsPeakPeak throughput rate for the period (in octets/second).ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.17 |
ipadDLCIstatsAverageAverage throughput rate for the period (in octets/second).ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.18 |
ipadDLCIstatsDelayPeakPeak roundtrip delay for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.19 |
ipadDLCIstatsDelayAverageAverage roundtrip delay for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.20 |
ipadDLCIstatsRoundTripTimeoutsNumber of timeouts on roundtrip delay for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.21 |
ipadDLCIstatsUASNumber of seconds the DLCI is unavailable.ro INTEGER .1.3.6.1.4.1.321.100.1.9.2.1.22 |
ipadUserStatsTableUser-selected protocol statistics. SEQUENCE OF IpadUserStatsEntry .1.3.6.1.4.1.321.100.1.9.3 |
ipadUserStatsEntryAn entry in the user statistics table. IpadUserStatsEntry .1.3.6.1.4.1.321.100.1.9.3.1 |
ipadUserStatsIndexIndex into the user statistics table.ro INTEGER .1.3.6.1.4.1.321.100.1.9.3.1.1 |
ipadUserStatsPeriodThe index into the user stats 24-hour table.ro Enumeration .1.3.6.1.4.1.321.100.1.9.3.1.2 |
ipadUserStatsTxFramesNumber of transmitted frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.3.1.3 |
ipadUserStatsRxFramesNumber of received frames for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.3.1.4 |
ipadUserStatsTxOctetsNumber of transmitted octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.3.1.5 |
ipadUserStatsRxOctetsNumber of received octets for the period.ro INTEGER .1.3.6.1.4.1.321.100.1.9.3.1.6 |
ipadUserStatsTxRatePeakPeak throughput rate for the period (in octets/second).ro INTEGER .1.3.6.1.4.1.321.100.1.9.3.1.7 |
ipadUserStatsTxRateAverageAverage throughput rate for the period (in octets/second).ro INTEGER .1.3.6.1.4.1.321.100.1.9.3.1.8 |
ipadIPTopNStatsTableIP TopN statistics. SEQUENCE OF IpadIPTopNStatsEntry .1.3.6.1.4.1.321.100.1.9.4 |
ipadIPTopNStatsEntryAn entry in the user statistics table. IpadIPTopNStatsEntry .1.3.6.1.4.1.321.100.1.9.4.1 |
ipadIPTopNStatsIndexIndex into the IP TopN statistics table.ro INTEGER .1.3.6.1.4.1.321.100.1.9.4.1.1 |
ipadIPTopNStatsAddressIP address of this entry.ro OCTET STRING .1.3.6.1.4.1.321.100.1.9.4.1.2 |
ipadIPTopNStatsTimestampTime of last IP frame for this entry.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.321.100.1.9.4.1.3 |
ipadIPTopNStatsRxFramesNumber of received IP frames for this entry.ro INTEGER .1.3.6.1.4.1.321.100.1.9.4.1.4 |
ipadIPTopNStatsRxOctetsNumber of received IP octets for this entry.ro INTEGER .1.3.6.1.4.1.321.100.1.9.4.1.5 |
ipadIPTopNStatsTxFramesNumber of transmitted IP frames for this entry.ro INTEGER .1.3.6.1.4.1.321.100.1.9.4.1.6 |
ipadIPTopNStatsTxOctetsNumber of transmitted IP octets for this entry.ro INTEGER .1.3.6.1.4.1.321.100.1.9.4.1.7 |
ipadPktSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.10 |
ipadPktSwOperatingModeSelects overall mode of operation.rw Enumeration .1.3.6.1.4.1.321.100.1.10.1 |
ipadPktSwCfgTableThe ipad packet switch configuration table. SEQUENCE OF IpadPktSwCfgTableEntry .1.3.6.1.4.1.321.100.1.10.2 |
ipadPktSwCfgTableEntryAn entry in the ipad packet switch configuration table. IpadPktSwCfgTableEntry .1.3.6.1.4.1.321.100.1.10.2.1 |
ipadPktSwCfgServiceThe index into the packet switch configuration table;
an entry in the ipad Service table.ro INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.1 |
ipadPktSwCfgInterfaceTypeNetwork ports should be set to User Network Interface (uni)
and user ports should be set to Network Interface (ni).rw Enumeration .1.3.6.1.4.1.321.100.1.10.2.1.2 |
ipadPktSwCfgLnkMgmtTypeIf set to auto, the frame relay LMI type will
be learned from the network side. If set to
none, all DLCI must be configured.rw Enumeration .1.3.6.1.4.1.321.100.1.10.2.1.3 |
ipadPktSwCfgMaxFrameSizeThis is the maximum frame size configured in the frame relay network.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.4 |
ipadPktSwCfgnN1Number of keep alive requests between full status request.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.5 |
ipadPktSwCfgnN2Number of errors from FRAD before alarm.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.6 |
ipadPktSwCfgnN3Number of events to sample nN2.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.7 |
ipadPktSwCfgnT1Delay before issuing a poll sequence.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.8 |
ipadPktSwCfgDefCIRDefault committed information rate in bits per second.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.9 |
ipadPktSwCfgDefExBurstDefault excess burst rate in bits per second.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.10 |
ipadPktSwCfgCIREEDetermines if the interface will enforce CIR and
excess burst configured values.rw Enumeration .1.3.6.1.4.1.321.100.1.10.2.1.11 |
ipadPktSwCfgLinkInjectionIndicates how to process frames in excess
of the CIR when congestion exists.rw Enumeration .1.3.6.1.4.1.321.100.1.10.2.1.12 |
ipadPktSwCfgAutoDiagnosticDetermines if the unit will put itself into
diagnostic mode everytime it determines that
there are no LMI received on a network service.rw Enumeration .1.3.6.1.4.1.321.100.1.10.2.1.13 |
ipadPktSwCfgAutoDiscoveryDetermines if the unit will learn the DLCIs
from the LMMI received on this service.rw Enumeration .1.3.6.1.4.1.321.100.1.10.2.1.14 |
ipadPktSwCfgMgmtDLCISpecifies the DLCI that will be used by the unit
for management information. Specifying a 0 disables
this feature.rw INTEGER .1.3.6.1.4.1.321.100.1.10.2.1.15 |
ipadTrapDest OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.11 |
ipadTrapDestTableThe ipad trap destination table. SEQUENCE OF IpadTrapDestTableEntry .1.3.6.1.4.1.321.100.1.11.1 |
ipadTrapDestTableEntryAn entry in the ipad trap destination table. IpadTrapDestTableEntry .1.3.6.1.4.1.321.100.1.11.1.1 |
ipadTrapDestIndexIndex into the ipad trap destination table.ro INTEGER .1.3.6.1.4.1.321.100.1.11.1.1.1 |
ipadTrapDestinationTrap destination.rw IpAddress .1.3.6.1.4.1.321.100.1.11.1.1.2 |
ipadMisc OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.12 |
ipadMiscPortSettingsThe ipad miscellaneous port settings table. SEQUENCE OF IpadMiscPortSettingsEntry .1.3.6.1.4.1.321.100.1.12.1 |
ipadMiscPortSettingsEntryAn entry in the ipad miscellaneous port settings table. IpadMiscPortSettingsEntry .1.3.6.1.4.1.321.100.1.12.1.1 |
ipadMiscPortSettingsIndexThe MIB-II ifIndex for this port.ro Enumeration .1.3.6.1.4.1.321.100.1.12.1.1.1 |
ipadMiscPortSettingsSerialTypeThe type of this serial port.rw Enumeration .1.3.6.1.4.1.321.100.1.12.1.1.2 |
ipadMiscClearStatusCountsWriting a 2 to this field will clear all status counts.rw Enumeration .1.3.6.1.4.1.321.100.1.12.2 |
ipadRouter OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.13 |
ipadSoftKey OBJECT IDENTIFIER .1.3.6.1.4.1.321.100.1.14 |
ipadSoftKeyTableTable of software keys. SEQUENCE OF IpadSoftKeyTableEntry .1.3.6.1.4.1.321.100.1.14.1 |
ipadSoftKeyTableEntryAn entry in the software key table. IpadSoftKeyTableEntry .1.3.6.1.4.1.321.100.1.14.1.1 |
ipadSoftKeyIndexIndex into the ipad software key table.ro INTEGER .1.3.6.1.4.1.321.100.1.14.1.1.1 |
ipadSoftKeyAcronymThree-letter acronym for software key.ro DisplayString .1.3.6.1.4.1.321.100.1.14.1.1.2 |
ipadSoftKeyDescriptionDescription, if available, of this software key.ro DisplayString .1.3.6.1.4.1.321.100.1.14.1.1.3 |
ipadSoftKeyExpirationDateExpiration date of this software key in the format YY/MM/DD.ro DisplayString .1.3.6.1.4.1.321.100.1.14.1.1.4 |
ipadSoftKeyEntryWriting a software key will enable that feature (assuming
a correct and valid key is entered).rw DisplayString .1.3.6.1.4.1.321.100.1.14.2 |