VERILINK-ENTERPRISE-NCMISDN-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
95
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
95 total| Object Name |
|---|
RFC1213-MIBThe PRI Port Configuration table . SEQUENCE OF NcmPRIPortConfigEntry .1.3.6.1.4.1.321.1.3031.8000 |
ncmPRICallProfileTableThe PRI Call Profile table . SEQUENCE OF NcmPRICallProfEntry .1.3.6.1.4.1.321.1.3031.8001 |
ncmPRICallProfEntryAn entry in the PRI Call Profile table . NcmPRICallProfEntry .1.3.6.1.4.1.321.1.3031.8001.1 |
ncmPRICallProfNIDIndexThe object specifies the node id of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3031.8001.1.1 |
ncmPRICallProfLineIndexThe index value which uniquely identifies the
interface to which this entry is applicable.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3031.8001.1.2 |
ncmPRICPCallProfileRefThe variable specifies the number of the call profile in the
list (starting from one, then two and so on).rw INTEGER .1.3.6.1.4.1.321.1.3031.8001.1.3 |
ncmPRICallProfCallDirThe variable specifies the call direction.rw Enumeration .1.3.6.1.4.1.321.1.3031.8001.1.4 |
ncmPRICallProfNumOwnDigitThe variable specifies the number of own digits.rw INTEGER .1.3.6.1.4.1.321.1.3031.8001.1.5 |
ncmPRICallProfOwnCallNumThe variable specifies the own call number.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.1.3031.8001.1.6 |
ncmPRICallProfExtNumPlanThe variable specifies the external numbering plan.rw Enumeration .1.3.6.1.4.1.321.1.3031.8001.1.7 |
ncmPRICallProfExtNumTypeThe variable specifies the external numbering type.rw Enumeration .1.3.6.1.4.1.321.1.3031.8001.1.8 |
ncmPRICallProfExtNumDigitThe variable specifies the external number of digits.rw INTEGER .1.3.6.1.4.1.321.1.3031.8001.1.9 |
ncmPRICallProfExtCallNumThe variable specifies the external call number.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.321.1.3031.8001.1.10 |
ncmPRICallProfTransferModeThe variable specifies the transfer mode.rw Enumeration .1.3.6.1.4.1.321.1.3031.8001.1.11 |
ncmPRICallProfCallBandWthThe variable specifies the call bandwidth.rw Enumeration .1.3.6.1.4.1.321.1.3031.8001.1.12 |
ncmPRICallProfMultiRateCntThe variable specifies the multirate count.rw Enumeration .1.3.6.1.4.1.321.1.3031.8001.1.13 |
ncmPRICallProfRateAdaptnThe variable specifies the rate adaptation.rw Enumeration .1.3.6.1.4.1.321.1.3031.8001.1.14 |
ncmPRICallProfTestCallIntvlThe variable specifies the test call interval.rw INTEGER .1.3.6.1.4.1.321.1.3031.8001.1.15 |
ncmPRICallProfCallStatusThe variable specifies the get call profile call status.ro Enumeration .1.3.6.1.4.1.321.1.3031.8001.1.16 |
ncmPRICallProfCallActionThe variable specifies the call profile call action.rw Enumeration .1.3.6.1.4.1.321.1.3031.8001.1.17 |
ncmPRICPSetCallProfThe variable specifies the call profile call action.rw Enumeration .1.3.6.1.4.1.321.1.3031.8001.1.18 |
ncmPRICPSetCallProfRespThe variable specifies the set call profile resultro Enumeration .1.3.6.1.4.1.321.1.3031.8001.1.19 |
ncmPRICPCallActionRespThe variable specifies the call action resultro Enumeration .1.3.6.1.4.1.321.1.3031.8001.1.20 |
ncmPRICallProfListTableThe PRI Call Profile List table . SEQUENCE OF NcmPRICallProfListEntry .1.3.6.1.4.1.321.1.3031.8002 |
ncmPRICallProfListEntryAn entry in the PRI Call Profile List table . NcmPRICallProfListEntry .1.3.6.1.4.1.321.1.3031.8002.1 |
ncmPRICPListNIDIndexThe object specifies the node id of the node of the
call profile list group.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3031.8002.1.1 |
ncmPRICPListLineIndexThe index value which uniquely identifies the
interface to which this entry is applicable.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3031.8002.1.2 |
ncmPRICPListIndexThe call profile list call reference index.ro INTEGER .1.3.6.1.4.1.321.1.3031.8002.1.3 |
ncmPRICPListValidCPRefNumThe variable is the valid call reference number.ro INTEGER .1.3.6.1.4.1.321.1.3031.8002.1.4 |
ncmPRICurrentTableThe PRI Current Interval table . SEQUENCE OF NcmPRICurrentEntry .1.3.6.1.4.1.321.1.3031.8003 |
ncmPRICurrentEntryAn entry in the PRI Current Interval table . NcmPRICurrentEntry .1.3.6.1.4.1.321.1.3031.8003.1 |
ncmPRICurrNIDIndexThe object specifies the node id of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3031.8003.1.1 |
ncmPRICurrLineIndexThe index value which uniquely identifies the
interface to which this entry is applicable.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3031.8003.1.2 |
ncmPRICurrEndTypeThe variable specifies the End Type .ro Enumeration .1.3.6.1.4.1.321.1.3031.8003.1.3 |
ncmPRICurrTimestampThe object specifies the timestamp in seconds.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.4 |
ncmPRICurrSecsInCurrIntvlThe object specifies the seconds in current interval.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.5 |
ncmPRICurrInfoRxThe object specifies the current INFOs received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.6 |
ncmPRICurrInfoTxThe object specifies the current INFOs transmitted.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.7 |
ncmPRICurrCRCErrRxThe object specifies the current CRC errors received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.8 |
ncmPRICurrInvalidFrameRxThe object specifies the current invalid frames received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.9 |
ncmPRICurrFrameAbortRxThe object specifies the current frame aborts received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.10 |
ncmPRICurrDISCSRxThe object specifies the current DISCs received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.11 |
ncmPRICurrDISCSTxThe object specifies the current DISCs transmitted.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.12 |
ncmPRICurrFramerRxThe object specifies the current framer received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.13 |
ncmPRICurrFramerTxThe object specifies the current framer transmitted.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.14 |
ncmPRICurrLyr3ProtErrThe object specifies the current Layer 3 protocol errors.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.15 |
ncmPRICurrCallSetupSentThe object specifies the current call setup sent.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.16 |
ncmPRICurrCallSetupSentnFailThe object specifies the current call setup sent and failed.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.17 |
ncmPRICurrCallSetupRxThe object specifies the current call setup received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.18 |
ncmPRICurrCallSetupRxnFailThe object specifies the current call setup received and failed.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.19 |
ncmPRICurrUnSupportMsgRxThe object specifies the current unsupported message received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.20 |
ncmPRICurrTstCalSetupSentnFailThe object specifies the current test call setups sent and failed.ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.21 |
ncmPRICurrValidIntvlsA number between 1 and 96ro INTEGER .1.3.6.1.4.1.321.1.3031.8003.1.22 |
ncmPRICurrStatisticResetThe variable specifies the statistic reset operation.rw Enumeration .1.3.6.1.4.1.321.1.3031.8003.1.23 |
ncmPRIIntervalTableThe PRI Interval table . SEQUENCE OF NcmPRIIntervalEntry .1.3.6.1.4.1.321.1.3031.8004 |
ncmPRIIntervalEntryAn entry in the PRI Interval table . NcmPRIIntervalEntry .1.3.6.1.4.1.321.1.3031.8004.1 |
ncmPRIntvlNIDIndexThe object specifies the node id of the node.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3031.8004.1.1 |
ncmPRIntvlLineIndexThe index value which uniquely identifies the
interface to which this entry is applicable.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.321.1.3031.8004.1.2 |
ncmPRIntvlEndTypeThe variable specifies the End Type .ro Enumeration .1.3.6.1.4.1.321.1.3031.8004.1.3 |
ncmPRIntvlIndexThe interval index.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.4 |
ncmPRIntvlTimestampThe object specifies the interval timestamp in seconds.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.5 |
ncmPRIntvlSecsInCurrIntvlThe object specifies the interval seconds in current interval.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.6 |
ncmPRIntvlInfoRxThe object specifies the interval INFOs received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.7 |
ncmPRIntvlInfoTxThe object specifies the interval INFOs transmitted.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.8 |
ncmPRIntvlCRCErrRxThe object specifies the interval CRC errors received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.9 |
ncmPRIntvlInvalidFrameRxThe object specifies the interval invalid frames received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.10 |
ncmPRIntvlFrameAbortRxThe object specifies the interval frame aborts received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.11 |
ncmPRIntvlDISCSRxThe object specifies the interval DISCs received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.12 |
ncmPRIntvlDISCSTxThe object specifies the interval DISCs transmitted.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.13 |
ncmPRIntvlFramerRxThe object specifies the interval framer received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.14 |
ncmPRIntvlFramerTxThe object specifies the interval framer transmitted.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.15 |
ncmPRIntvlLyr3ProtErrThe object specifies the interval Layer 3 protocol errors.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.16 |
ncmPRIntvlCallSetupSentThe object specifies the interval call setup sent.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.17 |
ncmPRIntvlCallSetupSentnFailThe object specifies the interval call setup sent and failed.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.18 |
ncmPRIntvlCallSetupRxThe object specifies the interval call setup received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.19 |
ncmPRIntvlCallSetupRxnFailThe object specifies the interval call setup received and failed.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.20 |
ncmPRIntvlUnSupportMsgRxThe object specifies the interval unsupported message received.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.21 |
ncmPRIntvlTstCalSetupSentnFailThe object specifies the interval test call setups sent and failed.ro INTEGER .1.3.6.1.4.1.321.1.3031.8004.1.22 |
ncmPRIPortConfigEntryAn entry in the PRI Port Configuration table . NcmPRIPortConfigEntry .ncmPRIPortConfigTable.1 |
ncmPRIPortNIDIndexThe object specifies the node id of the node.ro INTEGER (1..'7fffffff'h) .ncmPRIPortConfigTable.1.1 |
ncmPRIPortLineIndexThe index value which uniquely identifies the
interface to which this entry is applicable.ro INTEGER (1..'7fffffff'h) .ncmPRIPortConfigTable.1.2 |
ncmPRIPortInServiceThe object specifies whether the PRI Port is in service
or not.rw Enumeration .ncmPRIPortConfigTable.1.3 |
ncmPRIPortNFASModeThe variable specifies the Pri NFAS mode.
For DPRI card, it has selections of 1)No Nfas, 2)Nfas
For QPRI card, it has selections of 1)No Nfas, 2)Nfas on 4, 3)Nfas w/D
WARNING: The card must be reset for this change to take effect !rw Enumeration .ncmPRIPortConfigTable.1.4 |
ncmPRIPortDChanModeThe variable specifies the pri D-channel mode.rw Enumeration .ncmPRIPortConfigTable.1.5 |
ncmPRIPortDChanBitsThe variable specifies the pri D-channel bits.rw Enumeration .ncmPRIPortConfigTable.1.6 |
ncmPRIPortTimeslotMapThe variable specifies the timeslot map.rw DisplayString (SNMPv2-TC) .ncmPRIPortConfigTable.1.7 |
ncmPRIPortSwitchTypeThe variable specifies the pri switch type.rw Enumeration .ncmPRIPortConfigTable.1.8 |
ncmPRIPortOwnNumPlanThe variable specifies the pri own numbering plan.rw Enumeration .ncmPRIPortConfigTable.1.9 |
ncmPRIPortOwnNumTypeThe variable specifies the pri own numbering type.rw Enumeration .ncmPRIPortConfigTable.1.10 |
ncmPRIPortSecurityLevelThe variable specifies the fdl mode which is bit 0 of fdl
Parameter1.rw Enumeration .ncmPRIPortConfigTable.1.11 |
ncmPRIPortConfigStatusThe variable specifies the configuration result.ro Enumeration .ncmPRIPortConfigTable.1.12 |
ncmPRIPortSetConfigThe set configuration operation that involves sending out
the ACP message to set the configuration with the setup parametersrw Enumeration .ncmPRIPortConfigTable.1.13 |
ncmPRICallProfCallRefCountThe variable specifies the number of valid call reference numbersro INTEGER .ncmPRIPortConfigTable.1.14 |
ncmPRIL2AutoEstablishThe object specifies whether the PRI Port has an Auto
establishment for Layer-2 or not.rw Enumeration .ncmPRIPortConfigTable.1.15 |
ncmPRIResetCardThe reset card operation that involves sending out the ACP
message to reset the cardrw Enumeration .ncmPRIPortConfigTable.1.16 |
More MIBs from Verilink
Browse all VerilinkMIBs →VERILINK-ENTERPRISE-NCMGENERIC-MIB
SNMP MIB module
764 objects→
IPADv2-MIB
The IPADv2-MIB module facilitates the monitoring and management of IP Address Allocation and De-allocation (IPAD) events within network infrastructure, specifically tracking the assignment status, lease duration, and utilization of IP address pools via SNMPv2. This module enables administrators to audit dynamic address distribution, detect allocation conflicts, and verify the operational state of DHCP or IPAM services across compliant network devices.
629 objects→
VERILINK-ENTERPRISE-NCMALARM-MIB
Standard SNMP MIB module defining data structures for VERILINK-ENTERPRISE-NCMALARM-MIB.
574 objects→
DS8200v2-MIB
SNMP MIB module
446 objects→
VERILINK-ENTERPRISE-CSUNCM-MIB
SNMP MIB module
290 objects→
IPAD-MIB
Standard SNMP MIB module defining data structures for IPAD-MIB.
284 objects→