Unisphere-Data-PPPoE-CONF
The Unisphere-Data-PPPoE-CONF MIB module provides agent capabilities for monitoring and managing Point-to-Point Protocol over Ethernet (PPPoE) session states and configuration parameters on EMC Unisphere Data Routing Switches. It enables the retrieval of critical PPPoE operational metrics, including active session counts, interface status, and authentication states, to facilitate network troubleshooting and service availability verification.
Imported Objects
Objects
4 total| Object Name |
|---|
usdPppoeAgentThe agent capabilities definitions for the point-to-point protocol over Ethernet (PPPoE) component of the SNMP agent in the Unisphere Data Routing Switch family of products. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.33 |
usdPppoeAgentV1The MIB supported by the SNMP agent for the PPPoE application in the Unisphere Routing Switch. These capabilities became obsolete when AC-NAME and duplicate MAC address indicator objects were added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.33.1 |
usdPppoeAgentV2The MIB supported by the SNMP agent for the PPPoE application in the Unisphere Routing Switch. These capabilities became obsolete when PADI flag support was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.33.2 |
usdPppoeAgentV3The MIB supported by the SNMP agent for the PPPoE application in the Unisphere Routing Switch. Unknown .1.3.6.1.4.1.4874.5.2.33.3 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module