Unisphere-Data-PPPOE-MIB
AI MIB Summary
The Unisphere-Data-PPPOE-MIB module enables monitoring and management of Point-to-Point Protocol over Ethernet (PPPoE) session states, statistics, and configuration parameters on Juniper edge routers. It provides specific counters for active sessions, authentication failures, and link establishment events to facilitate troubleshooting of broadband access services.
The Point-to-Point Protocol over Ethernet (PPPoE) MIB for the Juniper edge router enterprise.
Main OID:
usdPPPoEMIB.1.3.6.1.4.1.4874.2.2.18
82
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
82 total| Object Name |
|---|
usdPPPoEMIBThe Point-to-Point Protocol over Ethernet (PPPoE) MIB for the Juniper edge router enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.18 |
usdPPPoEObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.18.1 |
usdPPPoEIfLayer OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.18.1.1 |
usdPPPoENextIfIndexCoordinate ifIndex value allocation for entries in usdPPPoEIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro UsdNextIfIndex (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.18.1.1.1 |
usdPPPoEIfTableThe parameters for the PPPoE service on this interface. SEQUENCE OF UsdPPPoEIfEntry .1.3.6.1.4.1.4874.2.2.18.1.1.2 |
usdPPPoEIfEntryThe Parameters for a particular PPPoE interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/usdIfTable, and usdPPPoEIfStatsTable. UsdPPPoEIfEntry .1.3.6.1.4.1.4874.2.2.18.1.1.2.1 |
usdPPPoEIfIfIndexThe ifIndex value of the corresponding ifEntry.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.1 |
usdPPPoEIfMaxNumSessionsThe number of sessions allowed on the PPPoE interface, zero indicates unlimited.rw INTEGER .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.2 |
usdPPPoEIfRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdPPPoEIfRowStatus usdPPPoEIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for usdPPPoEIfIndex must have been determined previously, by reading usdPPPoENextIfIndex. The interface identified by usdPPPoEIfLowerIfIndex must exist, and must be an interface type that permits layering of PPPoE above it. A corresponding entry in ifTable/ifXTable/usdIfTable is created or destroyed as a result of creating or destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.3 |
usdPPPoEIfLowerIfIndexThe ifIndex of an interface over which this PPPoE interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.4 |
usdPPPoEIfAcNameThe name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface.rw DisplayString .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.5 |
usdPPPoEIfDupProtectFlag to allow duplicate MAC addresses.rw UsdEnable (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.6 |
usdPPPoEIfPADIFlagThis flag controls whether always repsond to a PADI with a PADO regardless of the ability to create the session and allows the session establish phase to resolve it.rw UsdEnable (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.7 |
usdPPPoEIfAutoconfigThis flags determines whether the upper PPPoE interface is created dynamically or statically. When enable(1) the interface is created dynamically.rw UsdEnable (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.18.1.1.2.1.8 |
usdPPPoEIfStatsTableThe statistics for the PPP over Ethernet Interface for the PPPoE service on this interface. SEQUENCE OF UsdPPPoEIfStatsEntry .1.3.6.1.4.1.4874.2.2.18.1.1.3 |
usdPPPoEIfStatsEntryThe statistics for a particular PPPoE Interface. UsdPPPoEIfStatsEntry .1.3.6.1.4.1.4874.2.2.18.1.1.3.1 |
usdPPPoEIfStatsRxPADINumber of PADI packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.1 |
usdPPPoEIfStatsTxPADONumber of PADO packets transmitted.ro Counter32 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.2 |
usdPPPoEIfStatsRxPADRNumber of PADR packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.3 |
usdPPPoEIfStatsTxPADSNumber of PADS packets transmitted.ro Counter32 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.4 |
usdPPPoEIfStatsRxPADTNumber of PADT packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.5 |
usdPPPoEIfStatsTxPADTNumber of PADT packets transmitted.ro Counter32 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.6 |
usdPPPoEIfStatsRxInvVersionNumber of packets received with invalid version.ro Counter32 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.7 |
usdPPPoEIfStatsRxInvCodeNumber of packets received with invalid code.ro Counter32 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.8 |
usdPPPoEIfStatsRxInvTagsNumber of packets received with invalid tags.ro Counter32 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.9 |
usdPPPoEIfStatsRxInvSessionNumber of packets received with invalid session identifiers.ro Counter32 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.10 |
usdPPPoEIfStatsRxInvTypesNumber of packets received with invalid types.ro Counter32 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.11 |
usdPPPoEIfStatsRxInvPacketsNumber of invalid packets received.ro Counter32 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.12 |
usdPPPoEIfStatsRxInsufficientResourcesNumber of session requests that could not be honored due to invalid resources.ro Counter32 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.13 |
usdPPPoEIfStatsTxPADMNumber of PADM packets transmitted.ro Counter32 .1.3.6.1.4.1.4874.2.2.18.1.1.3.1.14 |
usdPPPoESubIfLayer OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.18.1.2 |
usdPPPoESubIfNextIfIndexCoordinate ifIndex value allocation for entries in usdPPPoESubIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro UsdNextIfIndex (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.18.1.2.1 |
usdPPPoESubIfTableThis table contains entries for PPPoE Subinterfaces present in the system. SEQUENCE OF UsdPPPoESubIfEntry .1.3.6.1.4.1.4874.2.2.18.1.2.2 |
usdPPPoESubIfEntryEach entry describes the characteristics of a PPPoE Subinterface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/usdIfTable. UsdPPPoESubIfEntry .1.3.6.1.4.1.4874.2.2.18.1.2.2.1 |
usdPPPoESubIfIndexThe ifIndex of the PPPoE Subinterface. When creating entries in this table, suitable values for this object are determined by reading usdPPPoESubNextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4874.2.2.18.1.2.2.1.1 |
usdPPPoESubIfRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdPPPoESubIfRowStatus usdPPPoESubIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for usdPPPoESubIfIndex must have been determined previously, by reading usdPPPoESubIfNextIfIndex. The interface identified by usdPPPoESubIfLowerIfIndex must exist, and must be a PPPoE interface. A positive value configured for usdPPPoESubIfId must not already be assigned to another subinterface layered onto the same underlying PPPoE interface. A corresponding entry in ifTable/ifXTable/usdIfTable is created or destroyed as a result of creating or destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.18.1.2.2.1.2 |
usdPPPoESubIfLowerIfIndexThe ifIndex of a PPPoE interface over which this PPPoE Subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.18.1.2.2.1.3 |
usdPPPoESubIfIdAn integer identifier for the PPPoE subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value must be unique among subinterfaces configured on the same underlying PPPoE interface. If this object is not configured, or is configured with a value of -1, a nonzero value will be allocated internally and can be retrieved from this object after table entry creation has succeeded. A value of zero for this object is reserved for future use.rw Integer32 (-1..2147483647) .1.3.6.1.4.1.4874.2.2.18.1.2.2.1.4 |
usdPPPoESubIfSessionIdThe current sessionId associated with this sub-interface.ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.2.2.1.5 |
usdPPPoESubIfMotmA message to send via a PADM on the sub-interface when the sub-interface transitions to the ifOperStatusUp state. The client may choose to display this message to the user.rw DisplayString .1.3.6.1.4.1.4874.2.2.18.1.2.2.1.6 |
usdPPPoESubIfUrlA URL to be sent via a PADM on the sub-interface when the sub-interface transitions to the ifOperStatusUp state. The client may use this URL as the initial web-page for the user.rw DisplayString .1.3.6.1.4.1.4874.2.2.18.1.2.2.1.7 |
usdPPPoEGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.18.1.3 |
usdPPPoEGlobalMotmA message to send via a PADM to all sub-interface that are currently in ifOperStatusUp state. A client may choose to display this information to the user. Retrieving this object always returns a null string.rw DisplayString .1.3.6.1.4.1.4874.2.2.18.1.3.1 |
usdPPPoEProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.18.1.4 |
usdPPPoEProfileTableThis table contains entries for the PPPoE portion of a profile entry.deprecated SEQUENCE OF UsdPPPoEProfileEntry .1.3.6.1.4.1.4874.2.2.18.1.4.1 |
usdPPPoEProfileEntryEach entry describes the characteristics of the PPPoE components of a profile entry. Each entry is applied to an interface when the IP interface above the PPPoE sub-interface becomes active.deprecated UsdPPPoEProfileEntry .1.3.6.1.4.1.4874.2.2.18.1.4.1.1 |
usdPPPoEProfileIndexThis is the index of the profile that the attributes are being set in. The index must exist before creating a row in this table. The index is equivalent to usdProfileIdId in the usdProfileIdTable.deprecated Unsigned32 .1.3.6.1.4.1.4874.2.2.18.1.4.1.1.1 |
usdPPPoEProfileRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy The index must exist in the profile manager before this entry can be created. CreateAndGo simply adds a table entry to the PPPoE component. Destroy deletes the entry in the PPPoE component (but not the entry in other components), and removes all PPPoE information relating to this profile.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.18.1.4.1.1.2 |
usdPPPoEProfileMotmA message to send via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. A client may choose to display this message to the user.rwdeprecated DisplayString .1.3.6.1.4.1.4874.2.2.18.1.4.1.1.3 |
usdPPPoEProfileUrlA URL to be sent via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. The string entered here can have several substitutions applied: %D is replaced with the profile name %d is replaced with the domain name %u is replaced with the user name %U is replaced with the user/domain name together %% is replaced with the % character The resulting string must not be greater than 127 octets long. The client may use this URL as the initial web-page for the user.rwdeprecated DisplayString .1.3.6.1.4.1.4874.2.2.18.1.4.1.1.4 |
usdPPPoESummary OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.18.1.5 |
usdPPPoEMajorInterfaceCountThe total number of PPPoE major interfaces configured and created in the system.ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.5.1 |
usdPPPoESummaryMajorIfAdminUpThe total number of PPPoE major interfaces in the system that are administratively configured to up(1).ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.5.2 |
usdPPPoESummaryMajorIfAdminDownThe total number of PPPoE major interfaces in the system that are administrateively configued to down(2).ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.5.3 |
usdPPPoESummaryMajorIfOperUpThe total number of PPPoE major interfaces in the system with an operational state of up(1).ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.5.4 |
usdPPPoESummaryMajorIfOperDownThe total number of PPPoE major interfaces in the system with an operational state of down(2).ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.5.5 |
usdPPPoESummaryMajorIfLowerLayerDownThe total number of PPPoE major interfaces in the system with an operational state of lowerLayerDown(7).ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.5.6 |
usdPPPoESummaryMajorIfNotPresentThe total number of PPPoE major interfaces in the system with an operational state of notPresent(6).ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.5.7 |
usdPPPoESummarySubInterfaceCountThe total number of PPPoE subinterfaces configured in the system.ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.5.8 |
usdPPPoESummarySubIfAdminUpThe total number of PPPoE subinterfaces in the system that are administratively configured to up(1).ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.5.9 |
usdPPPoESummarySubIfAdminDownThe total number of PPPoE subinterfaces in the system that are administrateively configued to down(2).ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.5.10 |
usdPPPoESummarySubIfOperUpThe total number of PPPoE subinterfaces in the system with an operational state of up(1).ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.5.11 |
usdPPPoESummarySubIfOperDownThe total number of PPPoE subinterfaces in the system with an operational state of down(2).ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.5.12 |
usdPPPoESummarySubIfLowerLayerDownThe total number of PPPoE subinterfaces in the system with an operational state of lowerLayerDown(7).ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.5.13 |
usdPPPoESummarySubIfNotPresentThe total number of PPPoE subinterfaces in the system with an operational state of notPresent(6).ro Integer32 .1.3.6.1.4.1.4874.2.2.18.1.5.14 |
usdPPPoEConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.18.4 |
usdPPPoEGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.18.4.4 |
usdPPPoEGroupObsolete collection of objects providing management of PPPoE interfaces in a Unisphere product. This statement became obsolete when new objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.18.4.4.1 |
usdPPPoESubIfGroupObsolete collection of objects providing management of PPPoE subinterfaces in a Unisphere product. This statement became obsolete when new sub-interface objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.18.4.4.2 |
usdPPPoEProfileGroupA collection of objects providing management of PPPoE profile entries in a Unisphere product. This group has been deprecated because the information is now supported in the UNISPHERE-PPPOE-PROFILE-MIB.deprecated Unknown .1.3.6.1.4.1.4874.2.2.18.4.4.3 |
usdPPPoEGroup2Obsolete collection of objects providing management of PPPoE interfaces in a Unisphere product. This statement became obsolete when new objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.18.4.4.4 |
usdPPPoESubIfGroup2A collection of objects providing management of PPPoE subinterfaces in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.18.4.4.5 |
usdPPPoESummaryGroupA collection of objects providing collection of summary statistics on PPPoE interfaces. Unknown .1.3.6.1.4.1.4874.2.2.18.4.4.6 |
usdPPPoEGroup3Obsolete collection of objects providing management of PPPoE interfaces in a Unisphere product. This group became obsolete when PADI flag support was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.18.4.4.7 |
usdPPPoEGroup4A collection of objects providing management of PPPoE interfaces in a Unisphere product. Unknown .1.3.6.1.4.1.4874.2.2.18.4.4.8 |
usdPPPoECompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.18.4.5 |
usdPPPoEComplianceObsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when profile support and new sub-interface objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.18.4.5.1 |
usdPPPoECompliance2Obsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when interface summary statistics objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.18.4.5.2 |
usdPPPoECompliance3Obsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when the profile objects were deprecated.obsolete Unknown .1.3.6.1.4.1.4874.2.2.18.4.5.3 |
usdPPPoECompliance4Obsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when new objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.18.4.5.4 |
usdPPPoECompliance5Obsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when PADI flag support was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.18.4.5.5 |
usdPPPoECompliance6The compliance statement for entities which implement the Unisphere PPPoE MIB. Unknown .1.3.6.1.4.1.4874.2.2.18.4.5.6 |