Unisphere-Data-IS-IS-CONF
The Unisphere-Data-IS-IS-CONF MIB module enables SNMP-based configuration management of the Intermediate System to Intermediate System (IS-IS) routing protocol on EMC Unisphere Data Routing Switches. It provides access to IS-IS protocol parameters, including area identifiers, router IDs, and interface-level settings required to define and maintain IS-IS adjacency states and routing topology.
Imported Objects
Objects
4 total| Object Name |
|---|
usdIsisAgentThe agent capabilities definitions for the intermediate system to intermediate system (IS-IS) protocol management component of the SNMP agent in the Unisphere Data Routing Switch family of products. MODULE-IDENTITY .1.3.6.1.4.1.4874.5.2.23 |
usdIsisAgentV1The MIB supported by the SNMP agent for the intermediate system to intermediate system (IS-IS) protocol application in the Unisphere Routing Switch. These capabilities became obsolete when the usdIsisCircState object was added.obsolete Unknown .1.3.6.1.4.1.4874.5.2.23.1 |
usdIsisAgentV2The MIB supported by the SNMP agent for the intermediate system to intermediate system (IS-IS) protocol application in the Unisphere Routing Switch. These capabilities became obsolete when MPLS support was added. Unknown .1.3.6.1.4.1.4874.5.2.23.2 |
usdIsisAgentV3The MIB supported by the SNMP agent for the intermediate system to intermediate system (IS-IS) protocol application in the Unisphere Routing Switch. Unknown .1.3.6.1.4.1.4874.5.2.23.3 |
More MIBs from Unisphere
Browse all UnisphereMIBs →SNMP MIB module
The Unisphere-Data-BGP-MIB enables monitoring and management of Border Gateway Protocol (BGP) session states, routing table statistics, and neighbor relationships on Dell EMC Unisphere for Data storage systems. It provides access to standard BGP MIB objects for tracking peer connectivity, route advertisements, and protocol error counters within the storage network infrastructure.
The Juniper-RADIUS-CLIENT-MIB enables monitoring of RADIUS client authentication sessions, accounting records, and server reachability states on Juniper network devices. It provides specific counters and gauges for tracking authentication failures, successful logins, and RADIUS server response times to validate access control infrastructure health.
The Juniper-UNI-ATM-MIB module provides SNMP management capabilities for Juniper devices configured with Asynchronous Transfer Mode (ATM) user-network interfaces, enabling the monitoring of ATM-specific performance counters, interface states, and VPI/VCI traffic statistics.
The Juniper-AAA-MIB enables monitoring of authentication, authorization, and accounting events on Juniper Networks devices, specifically tracking user session states, login success/failure counts, and accounting record generation for RADIUS and TACACS+ protocols.
SNMP MIB module