Unisphere-Data-ISIS-MIB
AI MIB Summary
The Unisphere-Data-ISIS-MIB enables monitoring and management of IS-IS routing protocol instances, including adjacency states, LSP flooding metrics, and SPF calculation statistics, on Unisphere Networks routing switches. This module facilitates the administration of ISO 10589-compliant IS-IS operations and RFC 1195-defined IP routing table construction within the Unisphere software environment.
The intermediate system to intermediate system (IS-IS) routing protocol MIB for Unisphere Networks routing switch products. This MIB provides objects for management of the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195.
Main OID:
usdIsisMIB.1.3.6.1.4.1.4874.2.2.38
182
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
182 total| Object Name |
|---|
usdIsisMIBThe intermediate system to intermediate system (IS-IS) routing protocol MIB for Unisphere Networks routing switch products. This MIB provides objects for management of the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.38 |
usdIsisObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.38.1 |
usdIsisSystemGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.38.1.1 |
usdIsisSysTableThe set of instances of the Integrated IS-IS protocol existing on the system. SEQUENCE OF UsdIsisSysEntry .1.3.6.1.4.1.4874.2.2.38.1.1.1 |
usdIsisSysEntryEach row defines information specific to a single instance of the protocol existing on the system. UsdIsisSysEntry .1.3.6.1.4.1.4874.2.2.38.1.1.1.1 |
usdIsisSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.1 |
usdIsisSysVersionThe version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid.ro DisplayString .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.2 |
usdIsisSysTypeThe type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.3 |
usdIsisSysIDThe ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles valid for this instance. The derivation of a value for this object is implementation-specific. Some implementations may assign values and not permit write MAX-ACCESS, others may require the value to be set manually.rw SystemID .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.4 |
usdIsisSysMaxPathSplitsMaximum number of paths with equal routing metric value which it is permitted to split between. This object follows the replaceOnlyWhileDisabled behaviour.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.5 |
usdIsisSysMaxLSPGenIntMaximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.6 |
usdIsisSysOrigL1LSPBuffSizeThe maximum size of Level 1 LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour.rw LSPBuffSize .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.7 |
usdIsisSysMaxAreaAddressesThe maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value configured for this attribute if correct operation is to be assumed. This object follows the replaceOnlyWhileDisabled behaviour.ro Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.8 |
usdIsisSysMinL1LSPGenIntMinimum interval, in seconds, between successive generation of L1 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.9 |
usdIsisSysMinL2LSPGenIntMinimum interval, in seconds, between successive generation of L2 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.10 |
usdIsisSysPollESHelloRateThe value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.ro Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.11 |
usdIsisSysWaitTimeNumber of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour.ro Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.12 |
usdIsisSysOperStateThe operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of this instance of the Integrated IS-IS protocol.rw OperState .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.13 |
usdIsisSysL1StateThe state of the Level 1 database.ro LevelState .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.14 |
usdIsisSysCorrLSPsNumber of corrupted LSPs detected.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.15 |
usdIsisSysLSPL1DbaseOloadsNumber of times the LSP L1 database has become overloaded.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.16 |
usdIsisSysManAddrDropFromAreasNumber of times a manual address has been dropped from the area.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.17 |
usdIsisSysAttmptToExMaxSeqNumsNumber of times the IS has attempted to exceed the maximum sequence number.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.18 |
usdIsisSysSeqNumSkipsNumber of times a sequence number skip has occurred.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.19 |
usdIsisSysOwnLSPPurgesNumber of times a zero-aged copy of the system's own LSP is received from some other node.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.20 |
usdIsisSysIDFieldLenMismatchesNumber of times a PDU is received with a different value for ID field length to that of the receiving system.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.21 |
usdIsisSysMaxAreaAddrMismatchesNumber of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.22 |
usdIsisSysOrigL2LSPBuffSizeThe maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour.rw LSPBuffSize .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.23 |
usdIsisSysL2StateThe state of the Level 2 database.ro LevelState .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.24 |
usdIsisSysLSPL2DbaseOloadsNumber of times the Level 2 LSP database has become overloaded.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.25 |
usdIsisSysAuthFailsThe number of authentication failures recognized by this instance of the protocol.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.26 |
usdIsisSysLSPIgnoreErrorsIf true, allow the router to ignore IS-IS link state packets (LSPs) that are received with internal checksum errors rather than purging the LSPs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.27 |
usdIsisSysMaxAreaCheckWhen on, enables checking of maximum area addresses per IS version of ISO10589.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.28 |
usdIsisSysSetOverloadBitIsis overload bitrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.29 |
usdIsisSysSetOverloadBitStartupDurationSpecifies the length in time of seconds to set the overload bit from startup. This object must be set together with usdIsisSysSetOverloadBit, otherwise the agent will return an error.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.30 |
usdIsisSysMaxLspLifetimeSpecifies the maximum time (in seconds) a LSP will remain in the box without being refreshed before being considered invalid.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.31 |
usdIsisSysL1SpfIntervalMinimum interval, in seconds, between level 1 SPF calculations.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.32 |
usdIsisSysL2SpfIntervalMinimum interval, in seconds, between level 2 SPF calculations.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.33 |
usdIsisSysIshHoldTimeSpecify a holdtime advertised in ESH/ISH PDUs.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.34 |
usdIsisSysIshConfigTimerSpecify the rate of transmission for ESH and ISH packets.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.35 |
usdIsisSysDistributeDomainWideWhen on, enables distribution of prefixes throughout a multi-level domain.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.36 |
usdIsisSysDistanceThe weight applied to IS-IS routes.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.37 |
usdIsisSysL1MetricStyleSpecifies the type of IP reachability TLV to advertise in level 1 LSPs.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.38 |
usdIsisSysL2MetricStyleSpecifies the type of IP reachability TLV to advertise in level 2 LSPs.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.39 |
usdIsisSysIsoRouteTagThe ISO routing area tag.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.40 |
usdIsisSysMplsTeLevelSelect flooding of MPLS traffic engineering link information into the specified ISIS level.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.41 |
usdIsisSysMplsTeRtrIdIfIndexConfigure the stable router interface ID to designate it as TE capable. A value of zero is used to remove any configured router interface ID.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.42 |
usdIsisManAreaAddrTableThe set of manual area addresses configured on this Intermediate System. SEQUENCE OF UsdIsisManAreaAddrEntry .1.3.6.1.4.1.4874.2.2.38.1.1.2 |
usdIsisManAreaAddrEntryEach entry contains one area address manually configured on this system. UsdIsisManAreaAddrEntry .1.3.6.1.4.1.4874.2.2.38.1.1.2.1 |
usdIsisManAreaAddrSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.2.1.1 |
usdIsisManAreaAddrA manually configured area address for this system. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an octet string is part of the OID. OSINSAddress .1.3.6.1.4.1.4874.2.2.38.1.1.2.1.2 |
usdIsisManAreaAddrRowStatusThe state of the usdIsisManAreaAddrEntry. This object follows the RowStatus behaviour. If an attempt is made to set this object to the value off when the corresponding usdIsisManAreaAddrEntry is the only valid entry for this instance and when the corresponding IS-IS instance has usdIsisSysOperState set to on then the attempt is rejected.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.2.1.3 |
usdIsisSysProtSuppTableThis table contains the manually configured set of protocols supported by each instance of the Integrated ISIS protocol. SEQUENCE OF UsdIsisSysProtSuppEntry .1.3.6.1.4.1.4874.2.2.38.1.1.3 |
usdIsisSysProtSuppEntryEach entry contains one protocol supported by an instance of the Integrated ISIS protocol. UsdIsisSysProtSuppEntry .1.3.6.1.4.1.4874.2.2.38.1.1.3.1 |
usdIsisSysProtSuppSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.3.1.1 |
usdIsisSysProtSuppProtocolOne supported protocol. This object follows the index behaviour. SupportedProtocol .1.3.6.1.4.1.4874.2.2.38.1.1.3.1.2 |
usdIsisSysProtSuppRowStatusThe state of the usdIsisSysProtSuppEntry. This object follows the RowStatus behavior.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.3.1.3 |
usdIsisSummAddrTableThe set of IP summary addresses to use in forming the contents of Level 2 LSPs originated by this level 2 Intermediate System. SEQUENCE OF UsdIsisSummAddrEntry .1.3.6.1.4.1.4874.2.2.38.1.1.4 |
usdIsisSummAddrEntryEach entry contains one IP summary address. UsdIsisSummAddrEntry .1.3.6.1.4.1.4874.2.2.38.1.1.4.1 |
usdIsisSummAddrSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviours. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.1 |
usdIsisSummAddressThe IP Address value for this summary address. This object follows the index behaviour. IpAddress .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.2 |
usdIsisSummAddrMaskThe mask value for this summary address. This object follows the index behaviour. IpAddress .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.3 |
usdIsisSummAddrRowStatusThe existence state of this summary address. This object follows the RowStatus behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.4 |
usdIsisSummAddrOperStateThe operational state of this entry. This object follows the operationalState behaviour. When the operational state changes if this would cause the contents of LSPs originated by the system to change then those new LSPs must be generated and sent as soon as is permitted by the ISIS protocol.rw OperState .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.5 |
usdIsisSummAddrDefaultMetricThe default metric value to announce this summary address with in Level 1 or 2 LSPs generated by this system. A Metric value of 0 indicates to use the lowest metric value amongst the routes being summarized. When advertising a metric value into a narrow domain (usdIsisSysL1MetricStyle or usdIsisSysL2MetricStyle is set to usdIsisMetricStyleNarrow) the value will be truncated to 63.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.6 |
usdIsisSummAddrDelayMetricThe delay metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.7 |
usdIsisSummAddrExpenseMetricThe expense metric value to announce this summary address with in Level 2 LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.8 |
usdIsisSummAddrErrorMetricThe error metric value to announce this summary address with in Level n LSPs generated by this system. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.9 |
usdIsisSummLevelThe level of database at which to annouce this summary.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.4.1.10 |
usdIsisSysHostNameTableThis table contains the manually configured set of host name to system ID aliases supported by each instance of the Integrated ISIS protocol. SEQUENCE OF UsdIsisSysHostNameEntry .1.3.6.1.4.1.4874.2.2.38.1.1.5 |
usdIsisSysHostNameEntryEach entry contains one name to system ID alias supported by an instance of the Integrated ISIS protocol. UsdIsisSysHostNameEntry .1.3.6.1.4.1.4874.2.2.38.1.1.5.1 |
usdIsisSysHostNameSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.1 |
usdIsisSysHostNameSysIdThe ID for the system which this name will be assigned. SystemID .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.2 |
usdIsisSysHostNameAreaAddrA configured area address for the system which this name will be assigned. This object follows the index behaviour. Note: an index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an Octet string is part of the OID.rw OSINSAddress .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.3 |
usdIsisSysHostNameNameA string to use when displaying system data with this system ID.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.4 |
usdIsisSysHostNameTypeThe type of host name entry.ro Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.5 |
usdIsisSysHostNameRowStatusThe status of this host name entry. This object follows the RowStatus behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.5.1.6 |
usdIsisSysAreaAuthenticationTableThis table contains the manually configured set of area authentication keys supported by each instance of the Integrated ISIS protocol. SEQUENCE OF UsdIsisSysAreaAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.1.6 |
usdIsisSysAreaAuthenticationEntryEach entry contains one area authentication key supported by an instance of the Integrated ISIS protocol. UsdIsisSysAreaAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.1.6.1 |
usdIsisSysAreaAuthenticationSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.1 |
usdIsisSysAreaAuthenticationKeyIdThe unique identifier of the instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.2 |
usdIsisSysAreaAuthenticationPwdThe value to be used as the Authentication Key in Level 1 Link State Packets whenever the value of usdIsisSysAreaAuthenticationKeyType has a value of plaintext or hmacMd5. A modification of usdIsisSysAreaAuthenticationKeyType does not modify the usdIsisSysAreaAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.3 |
usdIsisSysAreaAuthenticationKeyTypeWhat authentication scheme, if any, is used to protect Level 1 Link State packets and sequence number packetsrw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.4 |
usdIsisSysAreaAuthenticationStartAcceptTimeThe date and time when this authentication key will start to be used to validate level 1 LSPs and SNPs received. The Default value the start accept time will be the current time when the key was createdrw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.5 |
usdIsisSysAreaAuthenticationStartGenerateTimeThe date and time when this authentication key will start to be used to authenticate level 1 LSPs and SNPs transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutesrw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.6 |
usdIsisSysAreaAuthenticationStopAcceptTimeThe date and time when this authentication key will stop being accepted as a valid level 1 LSP and SNP key received. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.7 |
usdIsisSysAreaAuthenticationStopGenerateTimeThe date and time when this authentication key will stop being used to authenticate level 1 LSPs and SNPs transmitted. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.8 |
usdIsisSysAreaAuthenticationRowStatusThe existence state of this authentication key. This object follows the RowStatus behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.6.1.9 |
usdIsisSysDomainAuthenticationTableThis table contains the manually configured set of domain authentication keys supported by each instance of the Integrated ISIS protocol. SEQUENCE OF UsdIsisSysDomainAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.1.7 |
usdIsisSysDomainAuthenticationEntryEach entry contains one domain authentication key supported by an instance of the Integrated ISIS protocol. UsdIsisSysDomainAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.1.7.1 |
usdIsisSysDomainAuthenticationSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.1 |
usdIsisSysDomainAuthenticationKeyIdThe unique identifier of the instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.2 |
usdIsisSysDomainAuthenticationPwdThe value to be used as the Authentication Key in Level 2 Link State Packets whenever the value of usdIsisSysDomainAuthenticationKeyType has a value of plaintext or hmacMd5. A modification of usdIsisSysDomainAuthenticationKeyType does not modify the usdIsisSysDomainAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.3 |
usdIsisSysDomainAuthenticationKeyTypeWhat authentication scheme, if any, is used to protect Level 2 Link State packets and Sequence Number packetsrw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.4 |
usdIsisSysDomainAuthenticationStartAcceptTimeThe date and time when this authentication key will start to be used to validate level 2 LSPs and SNPs received. The Default value the start accept time will be the current time when the key was createdrw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.5 |
usdIsisSysDomainAuthenticationStartGenerateTimeThe date and time when this authentication key will start to be used to authenticate level 2 LSPs and SNPs transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutesrw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.6 |
usdIsisSysDomainAuthenticationStopAcceptTimeThe date and time when this authentication key will stop being accepted as a valid level 2 LSP and SNP key received. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.7 |
usdIsisSysDomainAuthenticationStopGenerateTimeThe date and time when this authentication key will stop being used to authenticate level 2 LSPs and SNPs transmitted. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.8 |
usdIsisSysDomainAuthenticationRowStatusThe existence state of this authentication key. This object follows the RowStatus behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.1.7.1.9 |
usdIsisCircuitGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.38.1.2 |
usdIsisCircTableThe table of circuits used by each instance of Integrated IS-IS on this system. SEQUENCE OF UsdIsisCircEntry .1.3.6.1.4.1.4874.2.2.38.1.2.1 |
usdIsisCircEntryAn usdIsisCircEntry exists for each circuit used by Integrated IS-IS on this system. UsdIsisCircEntry .1.3.6.1.4.1.4874.2.2.38.1.2.1.1 |
usdIsisCircSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.1 |
usdIsisCircIfIndexThe value of ifIndex for the interface to which this circuit corresponds. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.2 |
usdIsisCircLocalIDAn identification that can be used in protocol packets to identify a circuit. Implementations may devise ways to assure that this value is suitable for the circuit it is used on. LAN packets only have space for 8 bits. Values of usdIsisCircLocalID do not need to be unique. They are only required to differ on LANs where the Intermediate System is the Designated Intermediate System.ro Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.3 |
usdIsisCircOperStateThe operational state of the circuit. This object follows the operationalState behaviour.rw OperState .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.4 |
usdIsisCircRowStatusThe existence state of this circuit. This object follows the RowStatus behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.5 |
usdIsisCircTypeThe type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defined by the value of usdIsisCircIfIndex.ro Enumeration .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.6 |
usdIsisCircL1DefaultMetricThe default metric value of this circuit for Level 1 traffic.rw UsdDefaultMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.7 |
usdIsisCircL1DelayMetricThe delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.8 |
usdIsisCircL1ExpenseMetricThe expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.9 |
usdIsisCircL1ErrorMetricThe error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.10 |
usdIsisCircExtDomainIf true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.11 |
usdIsisCircAdjChangesThe number of times an adjacency state change has occurred on this circuit.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.12 |
usdIsisCircInitFailsThe number of times initialization of this circuit has failed.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.13 |
usdIsisCircRejAdjsThe number of times an adjacency has been rejected on this circuit.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.14 |
usdIsisCircOutCtrlPDUsThe number of IS-IS control PDUs sent on this circuit.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.15 |
usdIsisCircInCtrlPDUsThe number of IS-IS control PDUs received on this circuit.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.16 |
usdIsisCircIDFieldLenMismatchesThe number of times an IS-IS control PDU with an ID field length different to that for this system has been received.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.17 |
usdIsisCircL2DefaultMetricThe default metric value of this circuit for level 2 traffic.rw UsdDefaultMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.18 |
usdIsisCircL2DelayMetricThe delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.19 |
usdIsisCircL2ExpenseMetricThe expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.20 |
usdIsisCircL2ErrorMetricThe error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.ro OtherMetric .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.21 |
usdIsisCircManL2OnlyWhen true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.22 |
usdIsisCircL1ISPriorityThe priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit.rw ISPriority .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.23 |
usdIsisCircL1CircIDThe LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Level 1 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.ro CircuitID .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.24 |
usdIsisCircL1DesISThe ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.ro SystemID .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.25 |
usdIsisCircLANL1DesISChangesThe number of times the LAN Level 1 Designated Intermediate System has changed.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.26 |
usdIsisCircL2ISPriorityThe priority for becoming LAN level 2 Designated Intermediate System.rw ISPriority .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.27 |
usdIsisCircL2CircIDThe LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Level 2 Designated Intermediate System election), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.ro CircuitID .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.28 |
usdIsisCircL2DesISThe ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero length OCTET STRING.ro SystemID .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.29 |
usdIsisCircLANL2DesISChangesThe number of times the LAN Level 2 Designated Intermediate System has changed.ro Counter32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.30 |
usdIsisCircMCAddrSpecifies which type of multicast address will be used for sending HELLO PDUs on this circuit.ro Enumeration .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.31 |
usdIsisCircPtToPtCircIDThe ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End System, or because initialization has not yet successfully completed), this object has the value which would be proposed for this circuit (i.e. the concatenation of the local system ID and the one octet local Circuit ID for this circuit.ro CircuitID .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.32 |
usdIsisCircL1HelloTimerMaximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. It is also used as the period between Hellos on point to point circuits. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.33 |
usdIsisCircL2HelloTimerMaximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.34 |
usdIsisCircL1HelloMultiplierThis value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.35 |
usdIsisCircL2HelloMultiplierThis value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this ISrw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.36 |
usdIsisCircMinLSPTransIntMinimum interval, in milliseconds, between transmission of LSPs on a circuit. This object follows the resettingTimer behaviour. This timer shall be capable of a resolution not coarser than 10 milliseconds.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.37 |
usdIsisCircMinLSPReTransIntMinimum interval, in seconds, between re-transmission of an Level 1 or 2 LSP. This object follows the resettingTimer behaviour.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.38 |
usdIsisCircL1CSNPIntervalInterval of time, in seconds, between transmission of Level 1 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks the default is to not transmit CSNPs.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.39 |
usdIsisCircL2CSNPIntervalInterval of time, in seconds, between transmission of Level 2 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks the default is to not transmit CSNPs.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.40 |
usdIsisCircLSPThrottleMinimal interval of time, in milliseconds, between retransmissions of LSPs on a point to point interface.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.41 |
usdIsisCircMeshGroupEnabledIs this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.42 |
usdIsisCircMeshGroupCircuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. If usdIsisCircMeshGroupEnabled is false, this value is ignored.rw Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.43 |
usdIsisCircLevelThe type of this circuit. This object follows the replaceOnlyWhileDisabled behavior.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.44 |
usdIsisCircStateThe operational state of the circuit.ro Enumeration .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.45 |
usdIsisSysL1CircAuthenticationTableThis table contains the manually configured set of Level 1 Circuit authentication keys supported by each instance of the Integrated ISIS protocol. SEQUENCE OF UsdIsisSysL1CircAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.2.2 |
usdIsisSysL1CircAuthenticationEntryEach entry contains one Level 1 circuit authentication key supported by an instance of the Integrated ISIS protocol. UsdIsisSysL1CircAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.2.2.1 |
usdIsisSysL1CircAuthenticationSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.1 |
usdIsisSysL1CircAuthenticationIfIndexThe value of ifIndex for the interface to which this circuit corresponds. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.2 |
usdIsisSysL1CircAuthenticationKeyIdThe unique identifier of the instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.3 |
usdIsisSysL1CircAuthenticationPwdThe value to be used as the Authentication Key in Level 1 Hello Packets whenever the value of usdIsisSysL1CircAuthenticationKeyType has a value of hmacMd5. A modification of usdIsisSysL1CircAuthenticationKeyType does not modify the usdIsisSysL1CircAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.4 |
usdIsisSysL1CircAuthenticationKeyTypeWhat authentication scheme, if any, is used to protect Level 1 hello packets.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.5 |
usdIsisSysL1CircAuthenticationStartAcceptTimeThe date and time when this authentication key will start to be used to validate level 1 IIH packets received. The Default value the start accept time will be the current time when the key was created.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.6 |
usdIsisSysL1CircAuthenticationStartGenerateTimeThe date and time when this authentication key will start to be used to authenticate level 1 IIH packets transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.7 |
usdIsisSysL1CircAuthenticationStopAcceptTimeThe date and time when this authentication key will stop being accepted as a valid level 1 IIH packets key received. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.8 |
usdIsisSysL1CircAuthenticationStopGenerateTimeThe date and time when this authentication key will stop being used to authenticate level 1 IIH packets transmitted. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.9 |
usdIsisSysL1CircAuthenticationRowStatusThe existence state of this authentication key. This object follows the RowStatus behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.2.2.1.10 |
usdIsisSysL2CircAuthenticationTableThis table contains the manually configured set of Level 2 Circuit authentication keys supported by each instance of the Integrated ISIS protocol. SEQUENCE OF UsdIsisSysL2CircAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.2.3 |
usdIsisSysL2CircAuthenticationEntryEach entry contains one Level 2 circuit authentication key supported by an instance of the Integrated ISIS protocol. UsdIsisSysL2CircAuthenticationEntry .1.3.6.1.4.1.4874.2.2.38.1.2.3.1 |
usdIsisSysL2CircAuthenticationSysInstanceThe unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.1 |
usdIsisSysL2CircAuthenticationIfIndexThe value of ifIndex for the interface to which this circuit corresponds. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.2 |
usdIsisSysL2CircAuthenticationKeyIdThe unique identifier of the instance to which this row corresponds. This object follows the index behaviour. Integer32 .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.3 |
usdIsisSysL2CircAuthenticationPwdThe value to be used as the Authentication Key in Level 2 Hello Packets whenever the value of usdIsisSysL2CircAuthenticationKeyType has a value of hmacMd5. A modification of usdIsisSysL2CircAuthenticationKeyType does not modify the usdIsisSysL2CircAuthenticationPwd value. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.4 |
usdIsisSysL2CircAuthenticationKeyTypeWhat authentication scheme, if any, is used to protect Level 2 hello packets.rw Enumeration .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.5 |
usdIsisSysL2CircAuthenticationStartAcceptTimeThe date and time when this authentication key will start to be used to validate level 2 IIH packets received. The Default value the start accept time will be the current time when the key was created.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.6 |
usdIsisSysL2CircAuthenticationStartGenerateTimeThe date and time when this authentication key will start to be used to authenticate level 2 IIH packets transmitted. The Default value the start accept time will be the current time when the key was created + 2 minutes.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.7 |
usdIsisSysL2CircAuthenticationStopAcceptTimeThe date and time when this authentication key will stop being accepted as a valid level 2 IIH packets key received. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.8 |
usdIsisSysL2CircAuthenticationStopGenerateTimeThe date and time when this authentication key will stop being used to authenticate level 2 IIH packets transmitted. A value of zero indicates the key will never stop being used to authenticate packets.rw AuthTime .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.9 |
usdIsisSysL2CircAuthenticationRowStatusThe existence state of this authentication key. This object follows the RowStatus behaviour.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.38.1.2.3.1.10 |
usdIsisTrapGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.38.2 |
usdIsisConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.38.3 |
usdIsisCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.38.3.1 |
usdIsisComplianceObsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when the usdIsisCircState object was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.38.3.1.1 |
usdIsisCompliance2Obsolete compliance statement for systems supporting ISIS functionality. This statement became obsolete when MPSL support was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.38.3.1.2 |
usdIsisCompliance3The compliance statement for systems supporting ISIS functionality. Unknown .1.3.6.1.4.1.4874.2.2.38.3.1.3 |
usdIsisMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.38.3.2 |
usdIsisSystemMgmtGroupObsolete system level objects for ISIS management functionality. This group became obsolete when the MPLS management objects were added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.38.3.2.1 |
usdIsisCircuitMgmtGroupObsolete circuit management objects. This group became obsolete when the usdIsisCircState object was added.obsolete Unknown .1.3.6.1.4.1.4874.2.2.38.3.2.2 |
usdIsisCircuitMgmtGroup2The circuit management objects. Unknown .1.3.6.1.4.1.4874.2.2.38.3.2.3 |
usdIsisSystemMgmtGroup2The system level objects for ISIS management functionality. Unknown .1.3.6.1.4.1.4874.2.2.38.3.2.4 |