Unisphere-Data-DS3-MIB
AI MIB Summary
The Unisphere-Data-DS3-MIB module enables monitoring and management of DS3 (T3) physical layer interfaces and associated performance counters on Unisphere Networks storage systems via SNMP. It provides visibility into interface status, error statistics, and link utilization metrics specific to DS3 transport connections within the Unisphere Data environment.
The DS3 MIB for the Unisphere Networks Inc. enterprise.
Main OID:
usdDs3MIB.1.3.6.1.4.1.4874.2.2.4
38
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
38 total| Object Name |
|---|
usdDs3MIBThe DS3 MIB for the Unisphere Networks Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.4874.2.2.4 |
usdDs3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.4.1 |
usdDsx3ConfigTableThis table contains entries for DS3/E3 interfaces present in the
system. SEQUENCE OF UsdDsx3ConfigEntry .1.3.6.1.4.1.4874.2.2.4.1.1 |
usdDsx3ConfigEntryEach entry describes the characteristics of an DS3/E3 interface. UsdDsx3ConfigEntry .1.3.6.1.4.1.4874.2.2.4.1.1.1 |
usdDsx3LineLengthThe length of the DS3/E3 line in meters. This objects provides
information for line build out circuitry. This object is only useful if
the interface has configurable line build out circuitry.rw Integer32 .1.3.6.1.4.1.4874.2.2.4.1.1.1.1 |
usdDsx3LineTypeThis variable indicates the variety of DS3 C-bit or E3 application
implementing this interface. The type of interface affects the
interpretation of the usage and error statistics. The rate of DS3 is
44.736 Mbps and E3 is 34.368 Mbps. The dsx3ClearChannel value means
that the C-bits are not used except for sending/receiving AIS. Note
that this object represents the actual line type when the corresponding
value of dsx3LineType is dsx3other(1).
The values, in sequence, describe:
TITLE: SPECIFICATION:
dsx3M23 ANSI T1.107-1988
dsx3SYNTRAN ANSI T1.107-1988
dsx3CbitParity ANSI T1.107a-1989
dsx3ClearChannel ANSI T1.102-1987
e3G832 ITU-T G.832
e3Framed ITU-T G.751
e3Plcp ETSI T/NA(91)18.
dsx3M23Plcp ATM Forum af-phy-0054.000
dsx3CbitParityPlcp ATM Forum af-phy-0054.000rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.2 |
usdDsx3CellScramblerConfigThis variable indicates the state of the ATM cell scrambler for
interfaces which support ATM over DS3 or E3. For interfaces which do
not support ATM, this object returns the value notSupported(3).rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.3 |
usdDsx3ChannelizationThe channelization setting for this DS3 interface; true(1) indicates
channelization, false(2) indicates no channelization.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.4.1.1.1.4 |
usdDsx3InterfaceTypeThe DS3 interface type setting.rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.5 |
usdDsx3ApplicationThe interface application setting.rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.6 |
usdDsx3Ds3ChannelThe DS3 channel setting. The range of channel settings depends on the
line rate of the underlying interface.rw INTEGER .1.3.6.1.4.1.4874.2.2.4.1.1.1.7 |
usdDsx3LowerIfIndexThe ifIndex of the interface over which this DS3 interface is to be
layered. A value of zero indicates no layering. An implementation may
choose to require that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4874.2.2.4.1.1.1.8 |
usdDsx3RowStatusControls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support setting the
following values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
usdDsx3RowStatus
usdDsx3LowerIfIndex
In addition, when creating an entry the following conditions must hold:
A value for ifIndex must have been determined previously, by reading
usdDsx3NextIfIndex.
The interface identified by usdDsx3LowerIfIndex must exist.
A corresponding entry in ifTable/ifXTable/usdIfTable is created/destroyed
as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4874.2.2.4.1.1.1.9 |
usdDsx3Ds3DsuModeThe DSU configuration setting for this entry.rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.10 |
usdDsx3Ds3BandwidthLimitThe DSU bandwidth configuration for this entry.rw INTEGER .1.3.6.1.4.1.4874.2.2.4.1.1.1.11 |
usdDsx3Ds3DsuScrambleModeThe DSU scramble mode setting for this entry.rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.12 |
usdDsx3MdlCarrierSpecifies the interface is used in carrier environment.rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.13 |
usdDsx3MdlTransmitSpecifies transmission enabling.rw Enumeration .1.3.6.1.4.1.4874.2.2.4.1.1.1.14 |
usdDsx3MdlEicThis is the equipment identification code.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.1.1.15 |
usdDsx3MdlLicThis is the location identification code.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.1.1.16 |
usdDsx3MdlFicThis is the frame identification code.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.1.1.17 |
usdDsx3MdlUnitThis is the unit identification code.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.1.1.18 |
usdDsx3MdlPfiThis is the facility identification code to send in the MDL path
message.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.1.1.19 |
usdDsx3MdlPortThis is the equipment port number to send in the MDL idle signal
message.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.1.1.20 |
usdDsx3MdlGeneratorThis is the generator number to send in the MDL test signal message.rw DisplayString .1.3.6.1.4.1.4874.2.2.4.1.1.1.21 |
usdDs3NextIfIndexCoordinate ifIndex value allocation for entries in usdDsx3ConfigTable.
A GET of this object returns the next available ifIndex value to be used
to create an entry in the associated interface table; or zero, if no
valid ifIndex value is available. This object also returns a value of
zero when it is the lexicographic successor of a varbind presented in an
SNMP GETNEXT or GETBULK request, for which circumstance it is assumed
that ifIndex allocation is unintended.
Successive GETs will typically return different values, thus avoiding
collisions among cooperating management clients seeking to create table
entries simultaneously.ro UsdNextIfIndex (Unisphere-Data-TC) .1.3.6.1.4.1.4874.2.2.4.1.2 |
usdDsx3FarEndCurrentTableThis table contains entries for DS3/E3 interfaces present in the
system. SEQUENCE OF UsdDsx3FarEndCurrentEntry .1.3.6.1.4.1.4874.2.2.4.1.3 |
usdDsx3FarEndCurrentEntryEach entry describes the characteristics of an DS3/E3 interface. UsdDsx3FarEndCurrentEntry .1.3.6.1.4.1.4874.2.2.4.1.3.1 |
usdDsx3FarEndCurrentInvalidSecondsThe counter associated with the number of Invalid Seconds encountered
by a DS3/E3 interface in the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.4874.2.2.4.1.3.1.1 |
usdDsx3FarEndIntervalTableThis table contains entries for DS3/E3 interfaces present in the
system. SEQUENCE OF UsdDsx3FarEndIntervalEntry .1.3.6.1.4.1.4874.2.2.4.1.4 |
usdDsx3FarEndIntervalEntryEach entry describes the characteristics of an DS3/E3 interface. UsdDsx3FarEndIntervalEntry .1.3.6.1.4.1.4874.2.2.4.1.4.1 |
usdDsx3FarEndIntervalInvalidSecondsThe counter associated with the number of Invalid Seconds encountered
by a DS3/E3 interface in one of the previous 96 individual 15 minute
intervals.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.4874.2.2.4.1.4.1.1 |
usdDsx3FarEndTotalTableThis table contains entries for DS3/E3 interfaces present in the
system. SEQUENCE OF UsdDsx3FarEndTotalEntry .1.3.6.1.4.1.4874.2.2.4.1.5 |
usdDsx3FarEndTotalEntryEach entry describes the characteristics of an DS3/E3 interface. UsdDsx3FarEndTotalEntry .1.3.6.1.4.1.4874.2.2.4.1.5.1 |
usdDsx3FarEndTotalInvalidSecondsThe counter associated with the number of Invalid Seconds encountered
by a DS3/E3 interface in the previous 24 hour interval.ro PerfTotalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.4874.2.2.4.1.5.1.1 |
usdDs3Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.4.4 |
usdDs3Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.4.4.1 |
usdDs3Groups OBJECT IDENTIFIER .1.3.6.1.4.1.4874.2.2.4.4.2 |