USR-DSX3-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for USR-DSX3-MIB.
10
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
10 total| Object Name |
|---|
IMPORTSThe name of a ConfigFile to read/write permanent
database records. If the value of this object is an
empty string, then the NMBA process uses the
default name `@file://Dsx3.cfg'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.429.4.43.1 |
usrDsx3CFMStatusFlagSetting the value of this object to `save' causes the values
of the Dsx3SlotTable to be written out to the
current config file, which is stored in the
usrDsx3ConfigFileName object. While the new
ConfigFile is being written, the NMBA process
will set the value of this flag to `saving''. Any
attempts to set the value while it is not `normal'
(i.e. the file is currently being written to the
ConfigFile) while result in a badValue error being
returned. Setting the value to `normal' will result in no
action.rw UsrConfigStatus .1.3.6.1.4.1.429.4.43.2 |
usrDsx3ConfigTableUSR Specific variable Config table. SEQUENCE OF UsrDsx3ConfigEntry .1.3.6.1.4.1.429.4.43.3 |
usrDsx3ConfigEntryAn entry in the DSX3/E3 Configuration table. UsrDsx3ConfigEntry .1.3.6.1.4.1.429.4.43.3.1 |
usrDsx3LineIndexThis object is the identifier of a DSX3/E3
Interface on a managed device. If there is an
ifEntry that is directly associated with this
and only this DSX3/E3 interface, it should have
the same value as ifIndex. Otherwise, number
the dsx3LineIndices with an unique identifier
following the rules of choosing a number that
is greater than ifNumber and numbering the
inside interfaces (e.g., equipment side) with
even numbers and outside interfaces (e.g,
network side) with odd numbers.ro INTEGER .1.3.6.1.4.1.429.4.43.3.1.1 |
usrDsx3CableLengthThis variable indicates which compensation
measures are to be used with varying cable
lengths.
usrDsx3ShortHaul refers to cable lengths
shorter than xx meters. atmDsx3LongHaul handles
cable lengths longer than that.rw Enumeration .1.3.6.1.4.1.429.4.43.3.1.2 |
usrDsx3FrameTypeThis variable indicates which frame type
to use in transmission.
usrDsx3Adm sets the Phy to use Direct Mapping
on transmit , and usrDsx3Plcp uses the PLCP
framing format.rw Enumeration .1.3.6.1.4.1.429.4.43.3.1.3 |
usrDsx3PayloadScramblingAn indicator that tells if this interface is using
Payload Scrambling. Setting the variable to enabled
sets the Phy interface allow scrambling.rw Enumeration .1.3.6.1.4.1.429.4.43.3.1.4 |
usrDsx3TransmitCellsThis object contains the number of cells
transmitted in the current valid interval. At
the end of each interval the count is reset.ro INTEGER .1.3.6.1.4.1.429.4.43.3.1.5 |
usrDsx3RecieveCellsThis object contains the number of cells
received in the current valid interval. At
the end of each interval the count is reset.ro INTEGER .1.3.6.1.4.1.429.4.43.3.1.6 |