UX25-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for UX25-MIB.
217
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
217 total| Object Name |
|---|
usr OBJECT IDENTIFIER .1.3.6.1.4.1.429 |
RFC1213-MIB Unknown .1.3.6.1.4.1.429 |
nas OBJECT IDENTIFIER .1.3.6.1.4.1.429.1 |
ux25 OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.10 |
ux25AdmnChannelTableDefines objects for the parameters of an X.25 interface
which the administrator can read and set. SEQUENCE OF Ux25AdmnChannelEntry .1.3.6.1.4.1.429.1.10.1 |
ux25AdmnChannelEntryEntries of ux25AdmnChannelTable. Ux25AdmnChannelEntry .1.3.6.1.4.1.429.1.10.1.1 |
ux25AdmnChanneIndexA unique value for each X.25 subnetwork entity in the
chassis. The value of this object matches the value of the
index of the corresponding X.25 subnetwork entity entry in
the entity table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.10.1.1.1 |
ux25AdmnNetModeSelects the network protocol to be used.
Default=x2584(3).rw Enumeration .1.3.6.1.4.1.429.1.10.1.1.2 |
ux25AdmnProtocolVersionDetermines the X.25 protocol version being used on the
network. A network mode of X25_LLC overides this field to
the 1984 standard.
Default=x25ver84(3).rw Enumeration .1.3.6.1.4.1.429.1.10.1.1.3 |
ux25AdmnInterfaceModeIndicates the DTE/DCE nature of the link. The DXE
parameter is resolved using ISO 8208 for DTE-DTE operation.
Default=dteMode(2).rw Enumeration .1.3.6.1.4.1.429.1.10.1.1.4 |
ux25AdmnLowestPVCValLow end of the Permanent Virtual Circuit range. If both
the Low and High ends of the range are set to 0 there are
no PVCs.
Default=0.rw INTEGER .1.3.6.1.4.1.429.1.10.1.1.5 |
ux25AdmnHighestPVCValHigh end of the Permanent Virtual Circuit range. If both
the Low and High ends of the range are set to 0 there are
no PVCs.
Default=0.rw INTEGER .1.3.6.1.4.1.429.1.10.1.1.6 |
ux25AdmnChannelLICLow end of the one-way incoming logical channel. If both
Low and High ends of the channel are set to 0, there are no
one-way incoming channels.
Default=0.rw INTEGER .1.3.6.1.4.1.429.1.10.1.1.7 |
ux25AdmnChannelHICHigh end of the one-way incoming logical channel. If both
Low and High ends of the channel are set to 0, there are no
one-way incoming channels.
Default=0.rw INTEGER .1.3.6.1.4.1.429.1.10.1.1.8 |
ux25AdmnChannelLTCLow end of the two-way incoming logical channel. If both
Low and High ends of the channel are set to 0, there are no
two-way incoming channels.
Default=1024.rw INTEGER .1.3.6.1.4.1.429.1.10.1.1.9 |
ux25AdmnChannelHTCHigh end of the two-way incoming logical channel. If both
Low and High ends of the channel are set to 0, there are no
two-way incoming channels.
Default=1087.rw INTEGER .1.3.6.1.4.1.429.1.10.1.1.10 |
ux25AdmnChannelLOCLow end of the one-way outgoing logical channel. If both
Low and High ends of the channel are set to 0, there are no
one-way outgoing channels.
Default=0.rw INTEGER .1.3.6.1.4.1.429.1.10.1.1.11 |
ux25AdmnChannelHOCHigh end of the one-way outgoing logical channel. If both
Low and High ends of the channel are set to 0, there are no
one-way outgoing channels.
Default=0.rw INTEGER .1.3.6.1.4.1.429.1.10.1.1.12 |
ux25AdmnClassTableDefines objects for the parameters of an X.25 interface
which the administrator can read and set. SEQUENCE OF Ux25AdmnClassEntry .1.3.6.1.4.1.429.1.10.2 |
ux25AdmnClassEntryEntries of ux25AdmnClassTable. Ux25AdmnClassEntry .1.3.6.1.4.1.429.1.10.2.1 |
ux25AdmnClassIndexA unique value for each X.25 subnetwork entity in the
chassis. The value of this object matches the value of the
index of the corresponding X.25 subnetwork entity entry in
the entity table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.10.2.1.1 |
ux25AdmnLocMaxThruPutClassThe maximum value of the throughput class Quality of
Service parameter which is supported. According to ISO 8208
this parameter is bounded in the range >=3 and <=12
corresponding to a range 75 to 48000 bits/second. The
range supported here is 0 to 15 for non-standard X.25
implementations, which use the Throughput Class
Window/Packet Parameters (Group II).
Default=12.rw Enumeration .1.3.6.1.4.1.429.1.10.2.1.2 |
ux25AdmnRemMaxThruPutClassThe maximum value of the throughput class Quality of
Service parameter which is supported. According to ISO 8208
this parameter is bounded in the range >=3 and <=12
corresponding to a range 75 to 48000 bits/second. The
range supported here is 0 to 15 for non-standard X.25
implementations, which use the Throughput Class
Window/Packet Parameters (Group II).
Default=12.rw Enumeration .1.3.6.1.4.1.429.1.10.2.1.3 |
ux25AdmnLocDefThruPutClassThe default throughput class that is defined for the
local-to-remote direction. In some networks, such as
TELENET, negotiation of throughput class is constrained to
be towards a configured default throughput class. In other
PSDNs, this value should be set equal to the value of the
Maximum Local Throughput Class.
Default=12.rw Enumeration .1.3.6.1.4.1.429.1.10.2.1.4 |
ux25AdmnRemDefThruPutClassThe default throughput class value defined for
remote-to-local direction. In some networks, such as
TELENET, negotiation of throughput class is constrained to
be towards a configured default throughput class. In other
PSDNs, this value should be set equal to the value of the
Maximum Remote Throughput Class.
Default=12.rw Enumeration .1.3.6.1.4.1.429.1.10.2.1.5 |
ux25AdmnLocMinThruPutClassAccording to ISO 8208, the throughput class parameter is
defined in the range of >=3 to <=12. Some PSDNs may
provide different mapping, in which case, this parameter is
the minimum value.
Default=3.rw Enumeration .1.3.6.1.4.1.429.1.10.2.1.6 |
ux25AdmnRemMinThruPutClassAccording to ISO 8208, the throughput class parameter is
defined in the range of >=3 to <=12. Some PSDNs may
provide different mapping, in which case, this parameter is
the minimum value.
Default=3.rw Enumeration .1.3.6.1.4.1.429.1.10.2.1.7 |
ux25AdmnThclassNegToDefDetermines if throughput class negotiation will be used for
certain network procedures.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.2.1.8 |
ux25AdmnThclassTypeDefines which throughput class encodings can be used to
assign packet and window sizes. Some implementations of
X.25 do not use the X.25 packet and window negotiation and
rely on mapping the throughput class to these
parameters.
Default=noTcType(1).rw Enumeration .1.3.6.1.4.1.429.1.10.2.1.9 |
ux25AdmnThclassWinMapThe mapping between throughput class and a window
parameter. Each number has a range of 1 to
127.
Default=3.3.3.3.3.3.3.3.3.3.3.3.3.3.3.3rw DisplayString .1.3.6.1.4.1.429.1.10.2.1.10 |
ux25AdmnThclassPackMapThe mapping between the throughput class and a packet
parameter. Each number has a range of 4 to
12.
Default=7.7.7.7.7.7.7.7.7.7.7.7.7.7.7.7rw DisplayString .1.3.6.1.4.1.429.1.10.2.1.11 |
ux25AdmnPacketTableDefines objects for the parameters of an X.25 interface
which the administrator can read and set. SEQUENCE OF Ux25AdmnPacketEntry .1.3.6.1.4.1.429.1.10.3 |
ux25AdmnPacketEntryEntries of ux25AdmnPacketTable. Ux25AdmnPacketEntry .1.3.6.1.4.1.429.1.10.3.1 |
ux25AdmnPacketIndexA unique value for each X.25 subnetwork entity in the
chassis. The value of this object matches the value of the
index of the corresponding X.25 subnetwork entity entry in
the entity table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.10.3.1.1 |
ux25AdmnPktSequencingIndicates whether modulo 8 or 128 sequence numbering
operates on the network.
Default=pktSeq8(16).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.2 |
ux25AdmnLocMaxPktSizeMaximum acceptable size of packets in the local-to-remote
direction. On an incoming call, a value for the packet
size parameter greater than this value will be negotiated
down to an acceptable size when the call is
accepted.
Default=maxPktSz256(8).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.3 |
ux25AdmnRemMaxPktSizeMaximum acceptable size of packets in the remote-to-local
direction. On an incoming call, a value for the packet
size parameter greater than this value will be negotiated
down to an acceptable size when the call is
accepted.
Default=maxPktSz256(8).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.4 |
ux25AdmnLocDefPktSizeSpecifies the value of the default packet size for the
direction local-to-remote, which may be nonstandard,
provided the value is agreed between the communicating
parties on the LAN or between the DTE and
DCE.
Default=defPktSz256(8).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.5 |
ux25AdmnRemDefPktSizeSpecifies the value of the default packet size for the
direction remote-to-local, which may be nonstandard,
provided the value is agreed between the communicating
parties on the LAN or between the DTE and
DCE.
Default=defPktSz256(8).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.6 |
ux25AdmnLocMaxWinSizeSpecifies the maximum local window size. NOTE: 127 allowed
only for modulo 128 networks.
Default=7.rw INTEGER .1.3.6.1.4.1.429.1.10.3.1.7 |
ux25AdmnRemMaxWinSizeSpecifies the maximum remote window size. NOTE: 127
allowed only for modulo 128 networks.
Default=7.rw INTEGER .1.3.6.1.4.1.429.1.10.3.1.8 |
ux25AdmnLocDefWinSizeSpecifies the value of the default window size, which may
be nonstandard, provided the value is agreed on by all
parties on the LAN between the DTE and DCE. NOTE: The
sequence numbering scheme affects the range of this
parameter.
Default=2.rw INTEGER .1.3.6.1.4.1.429.1.10.3.1.9 |
ux25AdmnRemDefWinSizeSpecifies the value of the default window size, which may
be nonstandard, provided the value is agreed on by all
parties on the LAN between the DTE and DCE. NOTE: The
sequence numbering scheme affects the range of this
parameter.
Default=2.rw INTEGER .1.3.6.1.4.1.429.1.10.3.1.10 |
ux25AdmnMaxNSDULimitThe default maximum length beyond which concatenation is
stopped and data currently held is passed to the Network
Service user.
Default=256.rw INTEGER .1.3.6.1.4.1.429.1.10.3.1.11 |
ux25AdmnAccNoDiagnosticAllow the omission of the diagnostic byte in incoming
RESTART, CLEAR and RESET INDICATION
packets.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.12 |
ux25AdmnUseDiagnosticPacketUse diagnostic packets.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.13 |
ux25AdmnItutClearLenRestrict the length of a CLEAR INDICATION to 5 bytes and a
CLEAR CONFIRM to 3 bytes.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.14 |
ux25AdmnBarDiagnosticPacketBar diagnostic packets.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.15 |
ux25AdmnDiscNzDiagnosticDiscard all diagnostic packets on a non-zero
LCN.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.16 |
ux25AdmnAcceptHexAddAllow DTE addresses to contain hexadecimal
digits.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.17 |
ux25AdmnBarNonPrivilegeListenDisallow a non-privileged user (i.e without superuser
privilege) from listening for incoming
calls.
Default=enable(2).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.18 |
ux25AdmnIntlAddrRecognitionDetermine whether outgoing international calls are to be
accepted. The values and their interpretation are:
1 -
International calls are not distinguished.
2 - The DNIC of
the called DTE address is examined and compared to that
held in the psdn_local members dnic1 and dnic2. A mismatch
implies an international call.
3 - International calls are
distinguished by having a '1' prefix on the DTE address.
4
- International calls are distinguished by having a '0'
prefix on the DTE address.
Default=notDistinguished(1).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.19 |
ux25AdmnDnicThis field contains the first four digits of DNIC and is
only used when ux25AdmnIntlAddrRecognition is set to
examineDnic(2). Note this field must contain exactly four
BCD digits.
Default=0000.rw DisplayString .1.3.6.1.4.1.429.1.10.3.1.20 |
ux25AdmnIntlPrioritizedDetermine whether some prioritizing method is to used for
international calls and is used in conjuction with
ux25AdmnPrtyEncodeCtrl and ux25AdmnPrtyPktForced
value.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.21 |
ux25AdmnPrtyEncodeCtrlDescribes how the priority request is to be encoded for
this PSDN.
Default=x2588(1).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.22 |
ux25AdmnPrtyPktForcedValIf this entry is other than prioPktSz1(1) all priority call
requests and incoming calls should have the associated
packet size parameter forced to this value. Note that the
actual packet size is 2 to the power of this
parameter.
Default=prioPktSz1(1).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.23 |
ux25AdmnSrcAddrCtrlProvide a means to override or set the calling address in
outgoing call requests for this PSDN.
Default=noSaCntrl(1).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.24 |
ux25AdmnDbitInAcceptDefines the action to take when a Call Accept is received
with the D-bit set and there is no local D-bit
support.
Default=clearCall(3).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.25 |
ux25AdmnDbitOutAcceptDefines the action to take when the remote user sends a
Call Accept with the D-bit set when the local user did not
request use of the D-bit.
Default=clearCall(3).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.26 |
ux25AdmnDbitInDataDefines the action to take when a data packet is received
with the D-bit set and the local user did not request use
of the D-bit.
Default=clearCall(3).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.27 |
ux25AdmnDbitOutDataDefines the action when the local user send a data packet
with the D-bit set, but the remote party has not indicated
D-bit support.
Default=clearCall(3).rw Enumeration .1.3.6.1.4.1.429.1.10.3.1.28 |
ux25AdmnSubscriberTableDefines objects for the parameters of an X.25 interface
which the administrator can read and set. SEQUENCE OF Ux25AdmnSubscriberEntry .1.3.6.1.4.1.429.1.10.4 |
ux25AdmnSubscriberEntryEntries of ux25AdmnSubscriberTable. Ux25AdmnSubscriberEntry .1.3.6.1.4.1.429.1.10.4.1 |
ux25AdmnSubscriberIndexA unique value for each X.25 subnetwork entity in the
chassis. The value of this object matches the value of the
index of the corresponding X.25 subnetwork entity entry in
the entity table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.10.4.1.1 |
ux25AdmnSubCugIaoaSpecifies if this DTE subscribes to Closed User Groups with
Incoming or Outgoing access.
Default=enable(2).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.2 |
ux25AdmnSubCugPrefSpecifies if this DTE subscribes to a Preferential Closed
User Groups.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.3 |
ux25AdmnSubCugoaSpecifies if this DTE subscribes to Closed User Groups with
Outgoing access.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.4 |
ux25AdmnSubCugiaSpecifies whether or not this DTE subscribes to Closed User
Groups with Incoming Access.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.5 |
ux25AdmnCugFormatThe maximum number of Closed User Groups that this DTE
subscribes to. This will be one of two ranges: Basic (100
or fewer) or Extended (between 101 and
10000).
Default=basic(1).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.6 |
ux25AdmnBarInCugProvides the means to force rejection of any incoming calls
carrying the Closed User Group optional facility (which is
necessary in some networks, such as DDN. When enabled, such
calls will be rejected, otherwise incoming Closed User
Group facilities are ignored.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.7 |
ux25AdmnSubExtendedSubscribe to extended call packets (Window and Packet size
negotiation is permitted).
Default=enable(2).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.8 |
ux25AdmnBarExtendedTreat window and packet size negotiation in incoming
packets as a procedure error.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.9 |
ux25AdmnSubFstSelNoRstrctSubscribe to fast select with no restriction on
response.
Default=enable(2).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.10 |
ux25AdmnSubFstSelWthRstrctSubscribe to fast select with restriction on
response.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.11 |
ux25AdmnAccptRvsChrgngAllow incoming calls to specify the reverse charging
facility.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.12 |
ux25AdmnSubLocChargePreventSubscribe to local charging
prevention.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.13 |
ux25AdmnSubToaNpiFormatSubscribe to TOA/NPI Address Format.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.14 |
ux25AdmnBarToaNpiFormatBar incoming call set-up and clearing packets which use the
TOA/NPI Address Format.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.15 |
ux25AdmnSubNuiOverrideSubscribe to NUI override.
Deafult=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.16 |
ux25AdmnBarInCallBar incoming calls.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.17 |
ux25AdmnBarOutCallBar outgoing calls.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.10.4.1.18 |
ux25AdmnTimerTableDefines objects for the parameters of an X.25 interface
which the administrator can read and set. SEQUENCE OF Ux25AdmnTimerEntry .1.3.6.1.4.1.429.1.10.5 |
ux25AdmnTimerEntryEntries of ux25AdmnTimerTable. Ux25AdmnTimerEntry .1.3.6.1.4.1.429.1.10.5.1 |
ux25AdmnTimerIndexA unique value for each X.25 subnetwork entity in the
chassis. The value of this object matches the value of the
index of the corresponding X.25 subnetwork entity entry in
the entity table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.10.5.1.1 |
ux25AdmnAckDelayThe maximum number of ticks (0.1 second units) over which a
pending acknowledgement is withheld.
Default=5.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.2 |
ux25AdmnRstrtTimeThe number of ticks (0.1 second units) for the DTE timer
parameter T20, the Restart Request Response
Timer.
Default=1800.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.3 |
ux25AdmnCallTimeThe number of ticks (0.1 second units) for the DTE timer
parameter T21, the Call Request Response
Timer.
Default=2000.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.4 |
ux25AdmnRstTimeThe number of ticks (0.1 second units) for the DTE timer
parameter T22, the Reset Request Response
Timer.
Default=1800.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.5 |
ux25AdmnClrTimeThe number of ticks (0.1 second units) for the DTE timer
parameter T23, the Clear Request Response
Timer.
Default=1800.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.6 |
ux25AdmnWinStatTimeRelated, but does not correspond exactly to the DTE Window
Status Transmission Timer, T24. Specifies the number of
ticks (0.1 second units) for the maximum time that
acknowledgments of data received from the remote
transmitter will be witheld. At timer expiration, any
witheld acknowledgments will be carried by a X.25 level 3
RNR packet.
Default=750.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.7 |
ux25AdmnWinRotTimeThe number of ticks (0.1 second units) for the DTE timer
parameter T25, the Window Rotation Timer.
Default=1500.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.8 |
ux25AdmnIntrptTimeThe number of ticks (0.1 second units) for the DTE timer
parameter T26, the Interrupt Response Timer.
Default=1800.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.9 |
ux25AdmnIdleValueThe number of ticks (0.1 second units) during which a link
level connection associated with no connections will be
maintained. If the link is to a WAN then this value should
be zero (infinity). This timer is only used with X.25 on a
LAN.
Default=0.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.10 |
ux25AdmnConnectValueSpecifies the number of ticks (0.1 second units), over
which the DTE/DCE resolution phase be completely
implemented in order to prevent the unlikely event that two
packet level entities cannot resolve their DTE/DCE nature.
When this expires, the link connection will be disconnected
and all pending connections aborted.
Default=2000.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.11 |
ux25AdmnRstrtCntThe number of ticks (0.1 second units) for the DTE Restart
Request Retransmission Count.
Default=1.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.12 |
ux25AdmnRstCntThe number of ticks (0.1 second units) for the DTE Reset
Request Retransmission Count.
Default=1.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.13 |
ux25AdmnClrCntThe number of ticks (0.1 second units) for the DTE Clear
Request Retransmission Count.
Default=1.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.14 |
ux25AdmnLocalDelayThe transit delay (in 0.1 second units) attributed to
internal processing.
Default=5.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.15 |
ux25AdmnAccessDelayThe transit delay (in 0.1 second units) attributed to the
effect of the line transmission rate.
Default=5.rw INTEGER .1.3.6.1.4.1.429.1.10.5.1.16 |
ux25OperChannelTableDefines objects that report the current parameters used by
a running interface. These objects are read only. SEQUENCE OF Ux25OperChannelEntry .1.3.6.1.4.1.429.1.10.6 |
ux25OperChannelEntryEntries of ux25OperChannelTable. Ux25OperChannelEntry .1.3.6.1.4.1.429.1.10.6.1 |
ux25OperChannelIndexro INTEGER .1.3.6.1.4.1.429.1.10.6.1.1 |
ux25OperNetModero Enumeration .1.3.6.1.4.1.429.1.10.6.1.2 |
ux25OperProtocolVersionro Enumeration .1.3.6.1.4.1.429.1.10.6.1.3 |
ux25OperInterfaceModero Enumeration .1.3.6.1.4.1.429.1.10.6.1.4 |
ux25OperLowestPVCValro INTEGER .1.3.6.1.4.1.429.1.10.6.1.5 |
ux25OperHighestPVCValro INTEGER .1.3.6.1.4.1.429.1.10.6.1.6 |
ux25OperChannelLICro INTEGER .1.3.6.1.4.1.429.1.10.6.1.7 |
ux25OperChannelHICro INTEGER .1.3.6.1.4.1.429.1.10.6.1.8 |
ux25OperChannelLTCro INTEGER .1.3.6.1.4.1.429.1.10.6.1.9 |
ux25OperChannelHTCro INTEGER .1.3.6.1.4.1.429.1.10.6.1.10 |
ux25OperChannelLOCro INTEGER .1.3.6.1.4.1.429.1.10.6.1.11 |
ux25OperChannelHOCro INTEGER .1.3.6.1.4.1.429.1.10.6.1.12 |
ux25OperClassTableDefines objects that report the current parameters used by
a running interface. These objects are read only. SEQUENCE OF Ux25OperClassEntry .1.3.6.1.4.1.429.1.10.7 |
ux25OperClassEntryEntries of ux25OperTable. Ux25OperClassEntry .1.3.6.1.4.1.429.1.10.7.1 |
ux25OperClassIndexro INTEGER .1.3.6.1.4.1.429.1.10.7.1.1 |
ux25OperLocMaxThruPutClassro Enumeration .1.3.6.1.4.1.429.1.10.7.1.2 |
ux25OperRemMaxThruPutClassro Enumeration .1.3.6.1.4.1.429.1.10.7.1.3 |
ux25OperLocDefThruPutClassro Enumeration .1.3.6.1.4.1.429.1.10.7.1.4 |
ux25OperRemDefThruPutClassro Enumeration .1.3.6.1.4.1.429.1.10.7.1.5 |
ux25OperLocMinThruPutClassro Enumeration .1.3.6.1.4.1.429.1.10.7.1.6 |
ux25OperRemMinThruPutClassro Enumeration .1.3.6.1.4.1.429.1.10.7.1.7 |
ux25OperThclassNegToDefro Enumeration .1.3.6.1.4.1.429.1.10.7.1.8 |
ux25OperThclassTypero Enumeration .1.3.6.1.4.1.429.1.10.7.1.9 |
ux25OperThclassWinMapro DisplayString .1.3.6.1.4.1.429.1.10.7.1.10 |
ux25OperThclassPackMapro DisplayString .1.3.6.1.4.1.429.1.10.7.1.11 |
ux25OperPacketTableDefines objects that report the current parameters used by
a running interface. These objects are read only. SEQUENCE OF Ux25OperPacketEntry .1.3.6.1.4.1.429.1.10.8 |
ux25OperPacketEntryEntries of ux25OperPacketTable. Ux25OperPacketEntry .1.3.6.1.4.1.429.1.10.8.1 |
ux25OperPacketIndexro INTEGER .1.3.6.1.4.1.429.1.10.8.1.1 |
ux25OperPktSequencingro Enumeration .1.3.6.1.4.1.429.1.10.8.1.2 |
ux25OperLocMaxPktSizero Enumeration .1.3.6.1.4.1.429.1.10.8.1.3 |
ux25OperRemMaxPktSizero Enumeration .1.3.6.1.4.1.429.1.10.8.1.4 |
ux25OperLocDefPktSizero Enumeration .1.3.6.1.4.1.429.1.10.8.1.5 |
ux25OperRemDefPktSizero Enumeration .1.3.6.1.4.1.429.1.10.8.1.6 |
ux25OperLocMaxWinSizero INTEGER .1.3.6.1.4.1.429.1.10.8.1.7 |
ux25OperRemMaxWinSizero INTEGER .1.3.6.1.4.1.429.1.10.8.1.8 |
ux25OperLocDefWinSizero INTEGER .1.3.6.1.4.1.429.1.10.8.1.9 |
ux25OperRemDefWinSizero INTEGER .1.3.6.1.4.1.429.1.10.8.1.10 |
ux25OperMaxNSDULimitro INTEGER .1.3.6.1.4.1.429.1.10.8.1.11 |
ux25OperAccNoDiagnosticro Enumeration .1.3.6.1.4.1.429.1.10.8.1.12 |
ux25OperUseDiagnosticPacketro Enumeration .1.3.6.1.4.1.429.1.10.8.1.13 |
ux25OperItutClearLenro Enumeration .1.3.6.1.4.1.429.1.10.8.1.14 |
ux25OperBarDiagnosticPacketro Enumeration .1.3.6.1.4.1.429.1.10.8.1.15 |
ux25OperDiscNzDiagnosticro Enumeration .1.3.6.1.4.1.429.1.10.8.1.16 |
ux25OperAcceptHexAddro Enumeration .1.3.6.1.4.1.429.1.10.8.1.17 |
ux25OperBarNonPrivilegeListenro Enumeration .1.3.6.1.4.1.429.1.10.8.1.18 |
ux25OperIntlAddrRecognitionro Enumeration .1.3.6.1.4.1.429.1.10.8.1.19 |
ux25OperDnicro DisplayString .1.3.6.1.4.1.429.1.10.8.1.20 |
ux25OperIntlPrioritizedro Enumeration .1.3.6.1.4.1.429.1.10.8.1.21 |
ux25OperPrtyEncodeCtrlro Enumeration .1.3.6.1.4.1.429.1.10.8.1.22 |
ux25OperPrtyPktForcedValro Enumeration .1.3.6.1.4.1.429.1.10.8.1.23 |
ux25OperSrcAddrCtrlro Enumeration .1.3.6.1.4.1.429.1.10.8.1.24 |
ux25OperDbitInAcceptro Enumeration .1.3.6.1.4.1.429.1.10.8.1.25 |
ux25OperDbitOutAcceptro Enumeration .1.3.6.1.4.1.429.1.10.8.1.26 |
ux25OperDbitInDataro Enumeration .1.3.6.1.4.1.429.1.10.8.1.27 |
ux25OperDbitOutDataro Enumeration .1.3.6.1.4.1.429.1.10.8.1.28 |
ux25OperSubscriberTableDefines objects that report the current parameters used by
a running interface. These objects are read only. SEQUENCE OF Ux25OperSubscriberEntry .1.3.6.1.4.1.429.1.10.9 |
ux25OperSubscriberEntryEntries of ux25OperSubscriberTable. Ux25OperSubscriberEntry .1.3.6.1.4.1.429.1.10.9.1 |
ux25OperSubscriberIndexro INTEGER .1.3.6.1.4.1.429.1.10.9.1.1 |
ux25OperSubCugIaoaro Enumeration .1.3.6.1.4.1.429.1.10.9.1.2 |
ux25OperSubCugPrefro Enumeration .1.3.6.1.4.1.429.1.10.9.1.3 |
ux25OperSubCugoaro Enumeration .1.3.6.1.4.1.429.1.10.9.1.4 |
ux25OperSubCugiaro Enumeration .1.3.6.1.4.1.429.1.10.9.1.5 |
ux25OperCugFormatro Enumeration .1.3.6.1.4.1.429.1.10.9.1.6 |
ux25OperBarInCugro Enumeration .1.3.6.1.4.1.429.1.10.9.1.7 |
ux25OperSubExtendedro Enumeration .1.3.6.1.4.1.429.1.10.9.1.8 |
ux25OperBarExtendedro Enumeration .1.3.6.1.4.1.429.1.10.9.1.9 |
ux25OperSubFstSelNoRstrctro Enumeration .1.3.6.1.4.1.429.1.10.9.1.10 |
ux25OperSubFstSelWthRstrctro Enumeration .1.3.6.1.4.1.429.1.10.9.1.11 |
ux25OperAccptRvsChrgngro Enumeration .1.3.6.1.4.1.429.1.10.9.1.12 |
ux25OperSubLocChargePreventro Enumeration .1.3.6.1.4.1.429.1.10.9.1.13 |
ux25OperSubToaNpiFormatro Enumeration .1.3.6.1.4.1.429.1.10.9.1.14 |
ux25OperBarToaNpiFormatro Enumeration .1.3.6.1.4.1.429.1.10.9.1.15 |
ux25OperSubNuiOverridero Enumeration .1.3.6.1.4.1.429.1.10.9.1.16 |
ux25OperBarInCallro Enumeration .1.3.6.1.4.1.429.1.10.9.1.17 |
ux25OperBarOutCallro Enumeration .1.3.6.1.4.1.429.1.10.9.1.18 |
ux25OperTimerTableDefines objects that report the current parameters used by
a running interface. These objects are read only. SEQUENCE OF Ux25OperTimerEntry .1.3.6.1.4.1.429.1.10.10 |
ux25OperTimerEntryEntries of ux25OperTimerTable. Ux25OperTimerEntry .1.3.6.1.4.1.429.1.10.10.1 |
ux25OperTimerIndexro INTEGER .1.3.6.1.4.1.429.1.10.10.1.1 |
ux25OperAckDelayro INTEGER .1.3.6.1.4.1.429.1.10.10.1.2 |
ux25OperRstrtTimero INTEGER .1.3.6.1.4.1.429.1.10.10.1.3 |
ux25OperCallTimero INTEGER .1.3.6.1.4.1.429.1.10.10.1.4 |
ux25OperRstTimero INTEGER .1.3.6.1.4.1.429.1.10.10.1.5 |
ux25OperClrTimero INTEGER .1.3.6.1.4.1.429.1.10.10.1.6 |
ux25OperWinStatTimero INTEGER .1.3.6.1.4.1.429.1.10.10.1.7 |
ux25OperWinRotTimero INTEGER .1.3.6.1.4.1.429.1.10.10.1.8 |
ux25OperIntrptTimero INTEGER .1.3.6.1.4.1.429.1.10.10.1.9 |
ux25OperIdleValuero INTEGER .1.3.6.1.4.1.429.1.10.10.1.10 |
ux25OperConnectValuero INTEGER .1.3.6.1.4.1.429.1.10.10.1.11 |
ux25OperRstrtCntro INTEGER .1.3.6.1.4.1.429.1.10.10.1.12 |
ux25OperRstCntro INTEGER .1.3.6.1.4.1.429.1.10.10.1.13 |
ux25OperClrCntro INTEGER .1.3.6.1.4.1.429.1.10.10.1.14 |
ux25OperLocalDelayro INTEGER .1.3.6.1.4.1.429.1.10.10.1.15 |
ux25OperAccessDelayro INTEGER .1.3.6.1.4.1.429.1.10.10.1.16 |
ux25StatTableDefines objects that report operational statistics for an
X.25 interface. SEQUENCE OF Ux25StatEntry .1.3.6.1.4.1.429.1.10.11 |
ux25StatEntryEntries of ux25StatTable. Ux25StatEntry .1.3.6.1.4.1.429.1.10.11.1 |
ux25StatIndexA unique value for each X.25 subnetwork entity in the
chassis. The value of this object matches the value of the
index of the corresponding X.25 subnetwork entity entry in
the entity table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.1 |
ux25StatCallsRcvdNumber of incoming calls.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.2 |
ux25StatCallsSentNumber of outgoing calls.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.3 |
ux25StatCallsRcvdEstabNumber of incoming calls established.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.4 |
ux25StatCallsSentEstabNumber of outgoing calls established.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.5 |
ux25StatDataPktsRcvdNumber of data packets received.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.6 |
ux25StatDataPktsSentNumber of data packets sent.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.7 |
ux25StatRestartsRcvdNumber of restarts received.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.8 |
ux25StatRestartsSentNumber of restarts sent.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.9 |
ux25StatRcvrNotRdyRcvdNumber of receiver not ready received.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.10 |
ux25StatRcvrNotRdySentNumber of receiver not ready sent.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.11 |
ux25StatRcvrRdyRcvdNumber of receiver ready received.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.12 |
ux25StatRcvrRdySentNumber of receiver ready sent.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.13 |
ux25StatResetsRcvdNumber of resets received.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.14 |
ux25StatResetsSentNumber of resets sent.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.15 |
ux25StatDiagPktsRcvdNumber of diagnostic packets received.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.16 |
ux25StatDiagPktsSentNumber of diagnostic packets sent.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.17 |
ux25StatIntrptPktsRcvdNumber of interrupt packets received.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.18 |
ux25StatIntrptPktsSentNumber of interrupt packets sent.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.19 |
ux25StatPVCsInDatTrnsfrStateNumber of PVCs in Data Transfer State.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.20 |
ux25StatSVCsInDatTrnsfrStateNumber of SVCs in Data Transfer State.ro INTEGER .1.3.6.1.4.1.429.1.10.11.1.21 |