MDM-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
532
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
532 total| Object Name |
|---|
usr OBJECT IDENTIFIER .1.3.6.1.4.1.429 |
RFC1213-MIB Unknown .1.3.6.1.4.1.429 |
nas OBJECT IDENTIFIER .1.3.6.1.4.1.429.1 |
mdm OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6 |
mdmID OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.1 |
mdmIDTableA list of modem ID entries. SEQUENCE OF MdmIDEntry .1.3.6.1.4.1.429.1.6.1.1 |
mdmIDEntryAn Identification table entry, containing objects which
define the identity and capabilities of a modem. MdmIDEntry .1.3.6.1.4.1.429.1.6.1.1.1 |
mdmIDIndexA unique value for each modem configured in the system
based on the values in the entity table in the USR
extensions to the chassis mib.ro INTEGER .1.3.6.1.4.1.429.1.6.1.1.1.1 |
mdmIDModelDefines the model (ie. V.23, HST, etc.) of the modem
represented by this row in the table.ro Enumeration .1.3.6.1.4.1.429.1.6.1.1.1.2 |
mdmIDCountryThis object identifies the country or countries that this
modem is designed for use in.ro Enumeration .1.3.6.1.4.1.429.1.6.1.1.1.3 |
mdmIDHardwareSerNumThe modem's hardware serial number as stored in EEPROM.ro DisplayString .1.3.6.1.4.1.429.1.6.1.1.1.4 |
mdmIDHardwareRevThe hardware revision of the modem as stored in the modem's
EEPROM.ro DisplayString .1.3.6.1.4.1.429.1.6.1.1.1.5 |
mdmIDSupervisorSwRevThe revision of the software being executed by the modem's
supervisor processor.ro DisplayString .1.3.6.1.4.1.429.1.6.1.1.1.6 |
mdmIDDataPumpSwRevThe revision of software being executed by the modem's data
pump processor.ro DisplayString .1.3.6.1.4.1.429.1.6.1.1.1.7 |
mdmIDIoProcessorSwRevThe revison of software being executed by the modem's IO
Control Processor.ro DisplayString .1.3.6.1.4.1.429.1.6.1.1.1.8 |
mdmIDSupervisorDateThe supervisor build date.ro DisplayString .1.3.6.1.4.1.429.1.6.1.1.1.9 |
mdmLi OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.2 |
mdmLiTableA list of configurable Line Interface objects for a modem.
The number of table entries is given by modemNumber. SEQUENCE OF MdmLiEntry .1.3.6.1.4.1.429.1.6.2.1 |
mdmLiEntryObjects which define the line interface characteristics for
a particualar modem. MdmLiEntry .1.3.6.1.4.1.429.1.6.2.1.1 |
mdmLiIndexIndex into the Line Interface table. This index is the
value from the chassis mib entity relation table that is
applicable for a particular modem.ro INTEGER .1.3.6.1.4.1.429.1.6.2.1.1.1 |
mdmLiDialPauseDuration in seconds for the pause(') option in the dial
command and the pause between command re-executions(> and
A>) Default = 2. Equates to the modem's S8 register.rw INTEGER .1.3.6.1.4.1.429.1.6.2.1.1.2 |
mdmLiCarrierRecDelayDuration in 10ths of a second that the remote modem's
carrier signal must be present before recognition. Ignored
at speeds above 2400. Equates to the modem's S9 register.
Default=6.rw INTEGER .1.3.6.1.4.1.429.1.6.2.1.1.3 |
mdmLiCarrierLossDuration in 10ths of a second the modem waits after loss of
carrier before hanging up. This allows the modem to
distinguish between a momentary lapse in line quality and a
true disconnect. When equal to 255 the modem will remain
off hook until DTR drops or an ATH command is recieved.
Equates to the modem's S10 register. Default=7.rw INTEGER .1.3.6.1.4.1.429.1.6.2.1.1.4 |
mdmLiToneDialTimingDuration and spacing in milliseconds of dialed Touch Tones.
Equates to the modem's S10 register. Default=70.rw INTEGER .1.3.6.1.4.1.429.1.6.2.1.1.5 |
mdmLiDteRxDataDelayDuration in 10ths of a second that the modem inserts a RX
transmission delay between CD and the first recieved
character. Intended for custom applications and not
recomended for general usage. Equates to the modem's S35
register. Default=0.rw INTEGER .1.3.6.1.4.1.429.1.6.2.1.1.6 |
mdmLiTransmiterEnables the modem to transmit data. Corresponds to the
modem 'C' register. Default=2.rw Enumeration .1.3.6.1.4.1.429.1.6.2.1.1.7 |
mdmLiDialModeDetermines whether the modem uses pulse or tone for dialing
when initiating outgoing calls. Equates to the P and T
registers in the modem. Default=0.rw Enumeration .1.3.6.1.4.1.429.1.6.2.1.1.8 |
mdmLiGuardToneThis object is required for modems answering calls that
originate from sites outside of North America. The modem's
must be operating in either 1200 or 2400 bps and be using
the V.32 answer sequence. This object defines what guard
tone is used for answering calls. This object equates to
the &G register in US Robotics modems. Default=none.rw Enumeration .1.3.6.1.4.1.429.1.6.2.1.1.9 |
mdmLiLeasedLineEnables modem to operate in leased line mode. When enabled
the local an remote modems make a continuous connection
without dialing. Should the connection be broken the
modem's will attempt to automaticly reestablish it(see
mdmCcLeasedLineRest). Equates to the modem's &L register
Default = disabled.rw Enumeration .1.3.6.1.4.1.429.1.6.2.1.1.10 |
mdmLiLeasedLineRestDelaySets the duration, in seconds, of the delay between when
the modem senses loss of carrier and when it attempts to
reestablish a leased line connection. The default setting
of 15 should be appropriate for most installations.rw INTEGER .1.3.6.1.4.1.429.1.6.2.1.1.11 |
mdmLiPulseMakeBreakDetermines the ratio of off hook to on hook interval for
Pulse dialing. Equates to the modem's &P register.
Default=North America.rw Enumeration .1.3.6.1.4.1.429.1.6.2.1.1.12 |
mdmLiAnswerToneDisables the 2100 Hz Answer tone allowing V.42 modems to
connect more quickly and/or eliminating problems with older
2400-bps modems that do not recognise this tone. Equates to
the modem's S27.3 register. Default=Enabled.rw Enumeration .1.3.6.1.4.1.429.1.6.2.1.1.13 |
mdmLiRemoteEscGuardTimeSets the duration in 20 millisecond increments of the guard
time that the modem requires preceding and following the
remote escape sequence.
The default is 200 or 4 seconds.rw INTEGER .1.3.6.1.4.1.429.1.6.2.1.1.14 |
mdmLiRemoteEscCharSpecifies the decimal value of the character used in the
remote access escape code for entering online command mode
on this modem from the remote site. Default = 126(~).rw INTEGER .1.3.6.1.4.1.429.1.6.2.1.1.15 |
mdmLiRemAccessLimitDetermines the number of attempts to enter remote online
command mode that are allowed for any one connection. The
default is 0 which disables the remote access functon.rw INTEGER .1.3.6.1.4.1.429.1.6.2.1.1.16 |
mdmLiRemPassword0The password that allows a dial-in user to gain view only
access to this modems parameters. A maximum of 8
characters is allowed.rw DisplayString .1.3.6.1.4.1.429.1.6.2.1.1.17 |
mdmLiRemPassword1The password used by a dial-in user to gain read-write
access to this modems configuration. Maximum length is 8
characters.rw DisplayString .1.3.6.1.4.1.429.1.6.2.1.1.18 |
mdmLiTransmitLevelSpecifies the signal level of the modem transmitter in
negative db.rw INTEGER .1.3.6.1.4.1.429.1.6.2.1.1.19 |
mdmLiSrcSpecifies either NIC or TDM as the source for the line
interface.rw Enumeration .1.3.6.1.4.1.429.1.6.2.1.1.20 |
mdmDc OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.3 |
mdmDcTableA table of configurable objects that define the operation
of Data Compression in the modem. SEQUENCE OF MdmDcEntry .1.3.6.1.4.1.429.1.6.3.1 |
mdmDcEntryObjects which define Data Compression operation for a
modem. MdmDcEntry .1.3.6.1.4.1.429.1.6.3.1.1 |
mdmDcIndexThe index into the Data Compression table. This object
contains the unique value for this modem as defined in the
chassis mib entity relation table.ro INTEGER .1.3.6.1.4.1.429.1.6.3.1.1.1 |
mdmDcDataCompressionDetermines when and how data compression is enabled.
Corresponds to the &K register in USR modems.rw Enumeration .1.3.6.1.4.1.429.1.6.3.1.1.2 |
mdmTf OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.4 |
mdmTfTableTable of test functions for modems. There is a table entry
for each modem the quantity of which is specified by
modemNumber. SEQUENCE OF MdmTfEntry .1.3.6.1.4.1.429.1.6.4.1 |
mdmTfEntryObjects used to request thet the modem perform certain
diagnostic tests. MdmTfEntry .1.3.6.1.4.1.429.1.6.4.1.1 |
mdmTfIndexA unique value used to identify this modem the value of
which is determined by the entity table in the chassis mib
and used as a method to index into the test function table.ro INTEGER .1.3.6.1.4.1.429.1.6.4.1.1.1 |
mdmTfTestEquates to modem's S16 register.rw INTEGER .1.3.6.1.4.1.429.1.6.4.1.1.2 |
mdmTfTestTimeDuration in seconds that the tests specified by
mdmTfTestControl are to execute. Default=0(indefinate).rw INTEGER .1.3.6.1.4.1.429.1.6.4.1.1.3 |
mdmTfV54Corresponds to modem's &T register and provides tests
specified by V.54. Default=normal.rw INTEGER .1.3.6.1.4.1.429.1.6.4.1.1.4 |
mdmTfV54ErrorsThe number of errors occurring during the last V54 loopback
test.ro INTEGER .1.3.6.1.4.1.429.1.6.4.1.1.5 |
mdmTfATGATG data from the modemro OCTET STRING .1.3.6.1.4.1.429.1.6.4.1.1.6 |
mdmTfDialInToneTestThis object is used to enable Dial in Tone Tests.rw Enumeration .1.3.6.1.4.1.429.1.6.4.1.1.7 |
mdmTfToneTestCallRefThis object is used to send the call reference info with
the tone test.ro OCTET STRING .1.3.6.1.4.1.429.1.6.4.1.1.8 |
mdmTfToneTableTable for modem tone tests SEQUENCE OF MdmTfToneEntry .1.3.6.1.4.1.429.1.6.4.2 |
mdmTfToneEntryObjects for modem tone tests MdmTfToneEntry .1.3.6.1.4.1.429.1.6.4.2.1 |
mdmTfToneIndexA value used to ID this modemro INTEGER .1.3.6.1.4.1.429.1.6.4.2.1.1 |
mdmTfTxFreqModem tone test TX frequencyrw INTEGER .1.3.6.1.4.1.429.1.6.4.2.1.2 |
mdmTfTxAmplModem tone test TX amplituderw INTEGER (-40..0) .1.3.6.1.4.1.429.1.6.4.2.1.3 |
mdmTfRxFreqModem tone test RX frequencyro INTEGER .1.3.6.1.4.1.429.1.6.4.2.1.4 |
mdmTfRxAmplModem tone test RX amplitudero INTEGER .1.3.6.1.4.1.429.1.6.4.2.1.5 |
mdmTfRspndrTableTable for 105/102 responder test results. SEQUENCE OF MdmTfRspndrEntry .1.3.6.1.4.1.429.1.6.4.3 |
mdmTfRspndrEntryObjects containing the 105/102 responder test result dB
levels and test status values. MdmTfRspndrEntry .1.3.6.1.4.1.429.1.6.4.3.1 |
mdmTfRspndrIndexA value used to ID this modem.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.1 |
mdmTf404FarNearLvl404 Hz tone at -16 dB loss test level. Far to near. Level
in 0.1 dB resolution.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.2 |
mdmTf404NearFarLvl404 Hz tone at -16 dB loss test level. Near to far. Level
in 0.1 dB resolution.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.3 |
mdmTf1004FarNearLvl1004 Hz tone at -16 dB loss test level. Far to near. Level
in 0.1 dB resolution.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.4 |
mdmTf1004NearFarLvl1004 Hz tone at -16 dB loss test level. Near to far. Level
in 0.1 dB resolution.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.5 |
mdmTf2804FarNearLvl2804 Hz tone at -16 dB loss test level. Far to near. Level
in 0.1 dB resolution.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.6 |
mdmTf2804NearFarLvl2804 Hz tone at -16 dB loss test level. Near to far. Level
in 0.1 dB resolution.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.7 |
mdmTfCmsgFarNearLvlC-message test level. Far to near. Level in 0.1 dB
resolution.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.8 |
mdmTfCmsgNearFarLvlC-message test level. Near to far. Level in 0.1 dB
resolution.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.9 |
mdmTfCnotchFarNearLvlC-notch test level. Far to near. Level in 0.1 dB
resolution.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.10 |
mdmTfCnotchNearFarLvlC-notch test level. Near to far. Level in 0.1 dB
resolution.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.11 |
mdmtTfSigNoiseFarNearLvlSignal to noise ratio level. Far to near. Level in 0.1 dB
resolution.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.12 |
mdmtTfSigNoiseNearFarLvlSignal to noise ratio level. Near to far. Level in 0.1 dB
resolution.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.13 |
mdmTf404FarNearSts404 Hz tone at -16 dB loss test status. Far to near.
Default=noTest(1).ro Enumeration .1.3.6.1.4.1.429.1.6.4.3.1.14 |
mdmTf404NearFarSts404 Hz tone at -16 db loss test status. Near to far.
Default=noTest(1).ro Enumeration .1.3.6.1.4.1.429.1.6.4.3.1.15 |
mdmTf1004FarNearSts1004 Hz tone at -16 dB loss test status. Far to near.
Default=noTest(1).ro Enumeration .1.3.6.1.4.1.429.1.6.4.3.1.16 |
mdmTf1004NearFarSts1004 Hz tone at -16 dB loss test status. Near to far.
Default=noTest(1).ro Enumeration .1.3.6.1.4.1.429.1.6.4.3.1.17 |
mdmTf2804FarNearSts2804 Hz tone at -16 dB loss test status. Far to near.
Default=noTest(1).ro Enumeration .1.3.6.1.4.1.429.1.6.4.3.1.18 |
mdmTf2804NearFarSts2804 Hz tone at -16 dB loss test status. Near to far.
Default=noTest(1).ro Enumeration .1.3.6.1.4.1.429.1.6.4.3.1.19 |
mdmTfCmsgFarNearStsC-message test status. Far to near.
Default=noTest(1).ro Enumeration .1.3.6.1.4.1.429.1.6.4.3.1.20 |
mdmTfCmsgNearFarStsC-message test status. Near to far.
Default=noTest(1).ro Enumeration .1.3.6.1.4.1.429.1.6.4.3.1.21 |
mdmTfCnotchFarNearStsC-notch test status. Far to near.
Default=noTest(1).ro Enumeration .1.3.6.1.4.1.429.1.6.4.3.1.22 |
mdmTfCnotchNearFarStsC-notch test status. Near to far.
Default=noTest(1).ro Enumeration .1.3.6.1.4.1.429.1.6.4.3.1.23 |
mdmTfSigNoiseFarNearStsSignal to noise ratio status. Far to near.
Default=noTest(1).ro Enumeration .1.3.6.1.4.1.429.1.6.4.3.1.24 |
mdmTfSigNoiseNearFarStsSignal to noise ratio status. Near to far.
Default=noTest(1).ro Enumeration .1.3.6.1.4.1.429.1.6.4.3.1.25 |
mdmTf0dB1004FarNearLvl1004 Hz tone at 0 db loss test level. Far to near. Level in
0.1 dB resolution.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.26 |
mdmTf0dB1004NearFarLvl1004 Hz tone at 0 db loss test level. Near to far. Level in
0.1 dB resolution.ro INTEGER .1.3.6.1.4.1.429.1.6.4.3.1.27 |
mdmTf0dB1004FarNearSts1004 Hz tone at 0 db loss test status. Far to
near.
Default=noTest(1).ro Enumeration .1.3.6.1.4.1.429.1.6.4.3.1.28 |
mdmTf0dB1004NearFarSts1004 Hz tone at 0 db loss test status. Near to
Far.
Default=noTest(1).ro Enumeration .1.3.6.1.4.1.429.1.6.4.3.1.29 |
mdmDi OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.5 |
mdmDiTableTable of DTE interface objects. The number of table
entries is specified by modemNumber. SEQUENCE OF MdmDiEntry .1.3.6.1.4.1.429.1.6.5.1 |
mdmDiEntryObjects that define the DTE interface for a modem. MdmDiEntry .1.3.6.1.4.1.429.1.6.5.1.1 |
mdmDiIndexThe index for the DTE interface table contains the unique
value associated with this modem as defined in the chassis
mib entity table.ro INTEGER .1.3.6.1.4.1.429.1.6.5.1.1.1 |
mdmDiEscCodeGuardTimeDuration in 50ths of a second of idle time that must
precede and follow the modem's command mode escape code.
Default=50.rw INTEGER .1.3.6.1.4.1.429.1.6.5.1.1.2 |
mdmDiLocalEscCharDecimal equivalent of the character that is used to escape
to on-line command mode. Values between 128 and 255
disable the escape code. Default=43(+).rw INTEGER .1.3.6.1.4.1.429.1.6.5.1.1.3 |
mdmDiCarriageRetCharSpecifies the decimal equivalent of the carriage return
character. Default=13.rw INTEGER .1.3.6.1.4.1.429.1.6.5.1.1.4 |
mdmDiLineFeedCharSpecifies the decimal equivalent of the line feed
character. Default=10.rw INTEGER .1.3.6.1.4.1.429.1.6.5.1.1.5 |
mdmDiBackspaceCharSpecifies the decimal equivalent of the backspace
character. Default=8.rw INTEGER .1.3.6.1.4.1.429.1.6.5.1.1.6 |
mdmDiDelAsBackspaceDefines functionality of the delete key. Acts either to
delete the character the cursor is currently on or acts the
same as the backspace key. Default=delete.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.7 |
mdmDiResetOnDtrEnaWhen enabled, this option will cause the modem to restart
when the DTR control signal drops. Default=disabled.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.8 |
mdmDiResultCodePauseDisWhen enabled, the modem pauses 250ms before transmission of
any result code. Default=enable.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.9 |
mdmDiInterbridgeEnaWhen enabled, the modem operates in a mode that is
compatible with an 'Appletalk InterBridge Network'.
Default=disabled.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.10 |
mdmDiBreakLenDefines the duration of break characters that are sent to
the DTE in ARQ mode. Defined in 10ms increments.
Default=10(100ms).rw INTEGER .1.3.6.1.4.1.429.1.6.5.1.1.11 |
mdmDiXonCharDefines the decimal equivalent of the Xon character. This
character will be used when software flow control is
enabled. Default=17.rw INTEGER .1.3.6.1.4.1.429.1.6.5.1.1.12 |
mdmDiXoffCharDefines the decimal equivalent of the xoff character. This
character will be used when software flow control is
enabled. Default=19.rw INTEGER .1.3.6.1.4.1.429.1.6.5.1.1.13 |
mdmDiDsrPulseTimeDuration in 20 millisecond increments that the DSR signal
is pulsed when the modem is configured for pulsed DSR mode.
Default=150.rw INTEGER .1.3.6.1.4.1.429.1.6.5.1.1.14 |
mdmDiRtsCtsDelayDuration in 10 millisecond increments that the modem delays
setting CTS after detecting the presence of RTS.
Default=1.rw INTEGER .1.3.6.1.4.1.429.1.6.5.1.1.15 |
mdmDiHiSpeedResCodeEnaDetermines if connection establishment result codes above
9600 are sent to the DTE. Default=enable.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.16 |
mdmDiCmdLocalEchoEnaDefines whether or not the characters transmitted by the
DTE are echoed back when in command mode.
Default=disabled.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.17 |
mdmDiDataModeEchoEnaDefines whether or not the DTE's transmitted data is echoed
back durring a connection(half duplex). Default=disabled.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.18 |
mdmDiDteDataRateModeDefines how the modem determines the DTE data rate. When
set to the default, follows link rate, the modem switches
the DTE speed to match the link rate. When set to fixed,
the DTE speed remains at the default DTE data rate or the
rate of the last AT command. When set to ARQ fixed-Non ARQ
follows the dte speed remains fixed for ARQ calls and
follows the link rate for non ARQ calls.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.19 |
mdmDiCdOverrideDefines the operation of the CD(Carrier Detect) signal.
When overridden the CD signal is always asserted.
Default=normal.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.20 |
mdmDiDtrOverrideDefines operation with regard to DTR. When overridden the
DTR signal is always assumed to be present.
Default=normal.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.21 |
mdmDiDsrOverrideDetermines the functionality of the modem's DSR signal.
Default=Override.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.22 |
mdmDiEiaLineStatusProvides a mechanism for the console to determine the
current state of the DTE's EIA signals.ro INTEGER .1.3.6.1.4.1.429.1.6.5.1.1.23 |
mdmDiTransmitFlowCntlDetermines if transmit flow control is enabled and if so
whether it is hardware or software. Default=none.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.24 |
mdmDiSoftwareRxFlowCntlDetermines if receive software flow control is enabled as
well as what type. Default=none.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.25 |
mdmDiHardwareRxFlowCntlDetermines if receive hardware flow control is enabled as
well as how it is implemented. Default=RTS ignored.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.26 |
mdmDiBreakHandlingDefines the method used to handle received breaks. When
defined as destructive the modem's transmit data buffer is
flushed. When defined as expidited, the break preceeds any
pending data in the transmit buffer.
Default=Destructive,Expidited.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.27 |
mdmDiDteNvramLockWhen locked, prohibits the DTE user from changing any of
the NVRAM settings in the modem. Default=unlocked.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.28 |
mdmDiSerialFormatDefines the data bits and parity of the modem's DTE. Used
in situations where the attached DTE is unable to send AT
commands to initialize the DTE format. Default=8 bit no
parity.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.29 |
mdmDiDefaultDteDataRateDefines the data rate of the DTE. Useful in those cases
where the DTE is incapable of sending an AT command to
initialize the data rate and a fixed data rate is required.
Default=9600.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.30 |
mdmDiRemAccessMsgSpecifies if the modem is to send the 'Modem Unavailable'
message to the DTE when the DTE attempts to send data to a
modem that is curently in command mode with a remote DTE.
Default = enabled.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.31 |
mdmDiV25DteDataRateDefines the DTE Data Rates supported for V25 bis.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.32 |
mdmDiSrcSpecifies either NIC or Packet Bus as the source for the
DTE interface.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.33 |
mdmDiSlotSpecifies the slot address as the DTE interface source
when mdmdiSrc is configured for Packet Bus.rw INTEGER .1.3.6.1.4.1.429.1.6.5.1.1.34 |
mdmDiBusyClockspecifies whether the modem will support either the current
transmit clock or a new busy out.rw Enumeration .1.3.6.1.4.1.429.1.6.5.1.1.35 |
mdmDiAtStringProvides an interface for issuing an AT command to the
modem. Not implemented as a command so as to allow the
object to be saved to NVRAM and subsequently configured
during power-up.rw DisplayString .1.3.6.1.4.1.429.1.6.5.1.1.36 |
mdmDiDtrRecognitionTimeS25 register tells the modem how quickly to react when DTR
transitions from off to on. Default is 20. Increments are
in 10 ms.rw INTEGER .1.3.6.1.4.1.429.1.6.5.1.1.37 |
mdmSc OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.6 |
mdmScTableTable of configurable objects which determine the operation
of the Signal Converter. The quantity of entries in this
table is defined by modemNumber. SEQUENCE OF MdmScEntry .1.3.6.1.4.1.429.1.6.6.1 |
mdmScEntryObjects that define the operation of the modem's Signal
Converter. MdmScEntry .1.3.6.1.4.1.429.1.6.6.1.1 |
mdmScIndexThe unique value found in the chassis mib entity relation
table that references this modem.ro INTEGER .1.3.6.1.4.1.429.1.6.6.1.1.1 |
mdmScLinkRateSelectDetermines if the link will run at a fixed or variable data
rate. Default=variable.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.2 |
mdmScNonArqBufSizeSets the sizer of the transmit buffer for non-ARQ mode
operation to either 128 bytes or 1.5K. The smaller size is
for low speed interactive applications, the large size is
for file transfer. Default=128.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.3 |
mdmScNonMnpDataCaptureCauses received characters to be buffered when the modem is
attempting to negotiate an MNP call and the remote modem is
not. Default=disabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.4 |
mdmScSyncTimingSourceSpecifies the clock source when operating in synchronous
mode. Default=internal.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.5 |
mdmScHstModMay be used to disable HST operation on USRobotics Dual
Standard modems. Default=enable.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.6 |
mdmScHiFreqEqAllows modem's high frequency equalization to be disabled
if it causes problems on shorter lines. Default=enabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.7 |
mdmScBackChanRateSpecifies the lower speed used in the asymetrical (HST)
mode of operation. The 300 bps setting is provided for
compatibility with early HST modems. Default=450.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.8 |
mdmScV21ModWhen enabled, the modem will answer both bell 103 and V.21
calls but originates only V.21 calls. Default=disabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.9 |
mdmScV32UnencodedModAllows unencoded modulation in V.32 mode. Although part of
the CCITT V.32 recomendation it is rarely used.
Default=disabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.10 |
mdmScV32ModAllows V.32 modulation to be disabled on USRobotics Dual
Standard modems. Default=enabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.11 |
mdmScBell208Allows modems that support Bell 208 modulation to include
Bell 208 as part of the negotiation sequence. Default=Bell
208 disabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.12 |
mdmScV32BisAllows V.32 bis modulation to be disabled. On USRobotics
Dual Standard modems this may be useful in troublshooting
HST operation. Default=V.32 bis enabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.13 |
mdmScV32BisEnhanceAllows USRobotics V.32 Enahnced mode to be disabled for
purposes of troubleshooting Default=enabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.14 |
mdmScV32QuickRetrainAllows the faster retrains that occur with USR's enhanced
V.32 mode to be disabled for troubleshooting purposes.
Default=enabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.15 |
mdmScV23Allows the modem to negotiate a V.23 connection(used in
U.K.) after failing to negotiate a higher rate.
Default=disabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.16 |
mdmScHiSpeedModulationDefines the handshaking options used in negotiation of high
speed calls. Default=CCITT V.32rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.17 |
mdmScFallbackDefines whether or not the modem will be allowed to change
protocols
it detects a significant change in the line
characteristics. If the modem is unable to maintain
transmission with the current modulation technique it would
fall back to a lower speed and if the line then improved it
would upshift to a higher speed. Default=enabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.18 |
mdmScV32TerboModeEnableAllows the V32 Terbo mode to be disabled/enabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.19 |
mdmScV34ModeEnableAllows V34 mode to be disabled/enabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.20 |
mdmScVFCSymRate2400Allows the 2400 symbol rate to be disabled/enabled on V.FC
modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.21 |
mdmScVFCSymRate2743Allows the 2743 symbol rate to be disabled/enabled on V.FC
modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.22 |
mdmScVFCSymRate2800Allows the 2800 symbol rate to be disabled/enabled on V.FC
modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.23 |
mdmScVFCSymRate3000Allows the 3000 symbol rate to be disabled/enabled on V.FC
modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.24 |
mdmScVFCSymRate3200Allows the 3200 symbol rate to be disabled/enabled on V.FC
modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.25 |
mdmScVFCSymRate3429Allows the 3429 symbol rate to be disabled/enabled on V.FC
modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.26 |
mdmScVFC8S2DMappingAllows the 8S-2D mapping to be disabled/enabled on V.FC
modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.27 |
mdmScVFC16S4DMappingAllows the 16S-4D mapping to be disabled/enabled on V.FC
modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.28 |
mdmScVFC32S2DMappingAllows the 32S-2D mapping to be disabled/enabled on V.FC
modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.29 |
mdmScVFC64S4DMappingAllows the 64S-4D mapping to be disabled/enabled on V.FC
modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.30 |
mdmScVFCNonLinearCodingAllows the non-linear coding to be disabled/enabled on V.FC
modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.31 |
mdmScVFCTxLevelDeviationAllows the TX level deviation to be disabled/enabled on
V.FC modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.32 |
mdmScVFCPreEmphasisAllows the pre-emphasis to be disabled/enabled on V.FC
modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.33 |
mdmScVFCPreCodingAllows the precoding to be disabled/enabled on V.FC
modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.34 |
mdmScVFCShapingAllows the shaping to be disabled/enabled on V.FC modems.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.35 |
mdmScVFCModeEnableAllows to disable/enable V.FC mode in order to troubleshoot
a connection.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.36 |
mdmScV8Allow V8 mode to be disabled/enabledrw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.37 |
mdmSCV8CallIndicatorAllow V.8. call indicater to be disabled/enabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.38 |
mdmScV34pModeEnableAllows V34 plus modulation mode to be disabled.
(default=0/enabled)rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.39 |
mdmSc300Restrict 300 baud negotiations. Register S48.0 Default is
disable (0) restriction.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.40 |
mdmSc1200Restrict 1200 baud negotiations. Register S48.1 Default is
disable (0) restriction.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.41 |
mdmSc2400Restrict 2400 baud negotiations. Register S48.2 Default is
disable (0) restriction.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.42 |
mdmScHighSpeedRestrict highspeed baud negotiations. Register S48.3
Default is disable (0) restriction.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.43 |
mdmScSelectiveRejectSelective Reject register S51.6 is a function of the
V.42/LAPM protocol. The default is enable (1)rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.44 |
mdmScPhExclusionDelEnable/disable phone extension delay S51.7. Default is
enablerw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.45 |
mdmScLinkRateAmpUMinimum high-speed direction link speed Default=variable.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.46 |
mdmScLowerSpeedMinLower speed direction minimum Default=1.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.47 |
mdmScLowerSpeedMaxLower speed direction maximum Default=1.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.48 |
mdmScX2ClientX2 Client Mode Disable Default=enabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.49 |
mdmScX2ServerX2 Server Mode Disable Default=enabled.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.50 |
mdmScX2SymmetricX2 Symmetric Mode Disable Default=enable.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.51 |
mdmScX2HighPowerConstThis object is used to enable/disable the X2 high-power
constellation. This object is only valid in countries,
where it is legal. It corresponds to S Register 76.7
Default = Disable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.52 |
mdmScPiafsThis object is used to enable/disable PIAFS protocol. It
corresponds to S Register 72.4 Default = enable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.53 |
mdmScPiafsV42bisThis object is used to enable/disable PIAFS V42bis
compression protocol. It corresponds to S Register 72.5.
Default = enable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.54 |
mdmScTxPwrLvlThis object configures the power level. It applies to
S-register S82.rw INTEGER .1.3.6.1.4.1.429.1.6.6.1.1.55 |
mdmScTxPwrLvlAppliedThis object configures where the power level is applied. It
applies to S-register S81.0.rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.56 |
mdmScX2Version2This object is the x2 Version 2 Modulation. It applies to
S-register S81.1rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.57 |
mdmScV34FallbackThis object is the x2 fallback to v34. It applies to
S-register S76.3rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.58 |
mdmScV90AnalogueThis object controls the enable/disable of the V.90 client
modulation.Default=Enable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.59 |
mdmScV90DigitalThis object controls the enable/disable of the V.90 server
modulation.Default=Enable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.60 |
mdmScV90AllDigitalThis object controls the enable/disable of the V.90
symmetric modulation. Default=Enable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.6.1.1.61 |
mdmCc OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.7 |
mdmCcTableA table containing the call control parameters for each
modem in the chassis. SEQUENCE OF MdmCcEntry .1.3.6.1.4.1.429.1.6.7.1 |
mdmCcEntryCall control parameters for a modem. These define the
sequence of operation related to how a call is negotiated. MdmCcEntry .1.3.6.1.4.1.429.1.6.7.1.1 |
mdmCcIndexThe index which uniquely identifies the modem to which this
entry is applicable. The value corresponds to the value of
the index to the entity table in the chassis MIB that
corresponds to the same modem.ro INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.1 |
mdmCcDialDelayDefines the number of seconds the modem waits between going
off hook and begining to dial. Ignored when result code
options 2,4,6,or 7 are active. Default=2.rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.2 |
mdmCcWaitForCarrierDefines the number of seconds the modem will wait for a
carrier signal after dialing. Default=60.rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.3 |
mdmCcInactivityTimerSets the duration (in seconds) that the modem will maintain
a connection when there is no activity on the phone line.
The feature is disabled when set to 0. Default=0.rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.4 |
mdmCcAutoDialOnDtrEnaWhen enabled the modem will dial the number present in
mdmCCPhoneString0 when the DTR signal transitions from low
to high. Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.5 |
mdmCcAutoDialOnPwrUpEnaWhen enabled, the modem will dial the number present in
mdmCcPhoneString0 on power up or after a reset.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.6 |
mdmCcGhostPortLockEnaWhen enabled, the modem requires that DTR go low before it
will accept another call. The modem also implements a Fast
Connect mode where CD is asserted before the link
negotiation is complete. Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.7 |
mdmCcQuietResultCodesDetermines whether or not the modem transmits result codes
to the DTE. Default=noResult(2).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.8 |
mdmCcResponseModeDetermines whether the modem transmits result codes in the
verbal or numeric mode. Default=verbal(2).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.9 |
mdmCcResultCodeOptionsDefines one of eight result code subsets and also defines
indirectly how the modem reacts to dial tone etc. Equates
to the modem's X register Default=1.rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.10 |
mdmCcArqResultCodeModeDefines whether or not the ARQ result codes are sent to the
DTE on connection(if result codes are enabled).
Default=arqResultsEnabled(2).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.11 |
mdmCcEscCodeRspDefines the action of the modem in response to the escape
code(+++). The default value is determined by the state of
Dip switch 2-3 on power up.rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.12 |
mdmCcAtRecognitionDetermines which, if any, AT commands the modem will
recognize or accept from the DTE. Default=ignore(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.13 |
mdmCcMgmtSysMsgDisDetermines if the modem is to send special result codes,
triggered by user conflicts with the management system, to
the DTE. Default=enable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.14 |
mdmCcV32ToneDurationSpecifies the duration (in 10ths of a second) that the
modem transmits the 3000/600 Hz answer tones for V.32
handshaking. A setting of 0 eliminates these tones and
will result in faster connect times for V.21 and V.23
calls. Default=8.rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.15 |
mdmCcAutoAnswerDetermines the number of rings that the modem will answer
calls on. When set to 0 the modem can only originate
calls. Default=1.rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.17 |
mdmCcAnswerInOrigModeWhen enabled the modem will answer calls using the sequence
normaly used by the originating modem. Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.18 |
mdmCcArqBufWaitSets the duration (in seconds) that the modem waits on an
ARQ call before clearing the transmit buffer and dropping
carrier after DTR drops. This is to allow time for the
remote modem to acknowledge receipt of all transmitted
data. Default=0.rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.19 |
mdmCcPhoneString0Phone number stored in modem's non volitile memory. Useful
in providing quick access to frequently called numbers. In
addition mdmCcPhoneString0 is used for the dial on power up
and dial on DTR options.rw DisplayString .1.3.6.1.4.1.429.1.6.7.1.1.20 |
mdmCcPhoneString1Phone number stored in the modem's non volitile memory,
useful for providing quick access to frequently called
numbers.rw DisplayString .1.3.6.1.4.1.429.1.6.7.1.1.21 |
mdmCcPhoneString2Phone number stored in the modem's non volitile memory,
useful in providing quick access to frequently called
numbers.rw DisplayString .1.3.6.1.4.1.429.1.6.7.1.1.22 |
mdmCcPhoneString3Phone number stored in the modem's non volitile memory,
useful in providing quick access to frequently called
numbers.rw DisplayString .1.3.6.1.4.1.429.1.6.7.1.1.23 |
mdmCcErrorCntlModeDefines if the modem is operating in synchronous or
asynchronous mode and how it responds relative to
negotiation of error control on asynchronous connections.
When set to the default, normalArq(3), the modem attempts
to connect with error control but if unable to negotiate it
connects anyway. When set to none(1), async connections do
not attempt to use error control. When set to arqOnly(4),
the modem will hang up if unable to negotiate error contol.
When set to syncMode(2), the modem will not connect
asynchronously.rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.24 |
mdmCcMiMicSpecifies whether the modem will recognize MI/MIC closure
as the mechanism for detecting incomming calls.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.25 |
mdmCcMnpWith1200Determines if the modem will include MNP/V42 negotiation on
1200 bps connections. Default=enable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.26 |
mdmCcMnpWith2400Determines if the modem will include MNP/V43 negotiation on
2400 bps calls. default=enable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.27 |
mdmCcMnpWithV32Determines if the modem will include MNP/V42 negotiation on
V.32 connections. Default=enable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.28 |
mdmCcMnpTimeoutSpecifies the MNP/V42 link request timeout for negotiation
of 1200 and 2400 bps calls. Default=5.rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.29 |
mdmCcV21V23FallBackTimerV21/V23 fallback timer, 1/10 sec. NVRAM S Register S29.
Default=20rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.30 |
mdmCcAddnlAnswToneDurAdditional answer tone duration, 1/10 sec. NVRAM S
Register S49. Default=16.rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.31 |
mdmCcBillingDelayPeriodBilling Delay Period. 1/50 sec. NVRAM S Register S50.
Default=100.rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.32 |
mdmCcCarrierAccessCode1The DNIS Carrier Access Code (CAC) Number. This is a
string which contains a number from 1 to 10 digits (e.g.
9501755). This is the 1st of 3 CACs.rw DisplayString .1.3.6.1.4.1.429.1.6.7.1.1.33 |
mdmCcCarrierAccessCode2The DNIS Carrier Access Code (CAC) Number. This is a
string which contains a number from 1 to 10 digits. This
is the 2nd of 3 CACs.rw DisplayString .1.3.6.1.4.1.429.1.6.7.1.1.34 |
mdmCcCarrierAccessCode3The DNIS Carrier Access Code (CAC) Number. This is a
string which contains a number from 1 to 10 digits. This is
the 3rd of 3 CACs.rw DisplayString .1.3.6.1.4.1.429.1.6.7.1.1.35 |
mdmCcCallingInitStr1This is the Carrier Access Code (CAC) initialization
string. This string is a configuration string of 1 to 30
characters (e.g. &F, &F&B1&R1, etc.) This string does NOT
include the AT attention prefix. This is the 1st of 4 CAC
init strings.rw DisplayString .1.3.6.1.4.1.429.1.6.7.1.1.36 |
mdmCcCallingInitStr2This is the Carrier Access Code (CAC) initialization
string. This string is 1 to 30 characters. It does NOT
include the AT attention prefix. It is the 2nd of 4 CAC
init strings.rw DisplayString .1.3.6.1.4.1.429.1.6.7.1.1.37 |
mdmCcCallingInitStr3This is the Carrier Access Code (CAC) initialization
string. This is a string of 1 to 30 characters. It does
NOT include the AT attention prefix. This is the 3rd of 4
CAC init strings.rw DisplayString .1.3.6.1.4.1.429.1.6.7.1.1.38 |
mdmCcCallingInitStr4This is the Carrier Access Code (CAC) initialization
string. This is a string of 1 to 30 characters. It does
NOT include the AT attention prefix. This is the 4th of 4
CAC init strings.rw DisplayString .1.3.6.1.4.1.429.1.6.7.1.1.39 |
mdmCcDataFaxModeGives the current Data/FAX mode of the modem.rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.40 |
mdmCcT1CallSetupProcDetermines T1 call setup procedures used. Choices are
'normal' or 'none'. None assumes a dedicated (leased) DS0
assigned to the modem.
Default=normalSetup(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.41 |
mdmCcT1DialToneTypeDetermines if MF or DTMF tones are used for T1 signaling.
Default = mfTones(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.42 |
mdmCcT1KpStMfTonesDetermines the usage of KP and ST MF tone encapsulation of
the dial sequence.
Default=enable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.43 |
mdmCcT1CallInitStrUseDetermines if calling init strings are used or
not.
Default=enable(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.44 |
mdmCcT1CallInitStrBaseDetermines if the calling init strings are based upon DNIS
or ANI.
Default=dnisBase(1).rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.45 |
mdmCcIntBlackListDisDisable BlackList restriction in the international modems.
Default=0 (enable) s40.1 regrw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.46 |
mdmCcOffHookRestrictDisable off-hook restriction in the international modems.
Default=0 (enable) S40.2 regrw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.47 |
mdmCcT1DialInAniDigSets the number of ANI digits allowed in incoming calls.
Default = 0.rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.48 |
mdmCcT1DialInDnisDigSets the number of DNIS/DID digits allowed in incoming
calls. Default = 0.rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.49 |
mdmCcNoPbNoConnEnaSets if to answer a call when there is no Packet Bus link.
Normal is the Default =0rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.50 |
mdmCcIdleDiscPattIdle disconnect pattern sent to the T1 NAC. Normal values:
USA = 1, international = 84. Default = 1. Configure the
T1 identically. Consult the help screen, user manual or US
Robotics before changing. Modem register S71.rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.51 |
mdmCcMnp10S61.4 register disable/enable MNP10 originate mode.rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.52 |
mdmCcMnp10EcS61.5 register disable/enable MNP10EC originate mode.rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.53 |
mdmCcAtzPbHandlingATZ handling over Packet Bus. S72 REGrw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.54 |
mdmCcDefltPRISlotDefault dialout PRI slot. Default = 1rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.55 |
mdmCcExtDTMFToneSupportEnable/Disable DTMF extended support. Default = disablerw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.56 |
mdmCcDataOverVoiceData Over Voice support originate S68.1.rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.57 |
mdmCc2100AnswerToneData Over Voice support answer S68.2.rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.58 |
mdmCcEnableV120v42BisV.42bis Compression over V.120. S67.4rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.59 |
mdmCcHdlcLicIeThis object is to Enable\Disable LIC IE message for HDLC
protocols. S Register S68.3rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.60 |
mdmCcDtmfTerminationToneThis object is to set the DTMF Termination Tone.rw INTEGER .1.3.6.1.4.1.429.1.6.7.1.1.61 |
mdmCcAfaxMaxRateSrvOpt20This object is used to limit the maximum rate for an Analog
Fax Connection. Service option 20. Upper nibble of the S94
register.rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.62 |
mdmCcAfaxMaxRateSrvOpt21This object is used to limit the maximum rate for an Analog
Fax Connection. Service option 21. Lower nibble of S94
register.rw Enumeration .1.3.6.1.4.1.429.1.6.7.1.1.63 |
mdmEc OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.8 |
mdmEcTableA table of Error Control Parameters for each modem in this
system, the quantity of entries is given by modemNumber. SEQUENCE OF MdmEcEntry .1.3.6.1.4.1.429.1.6.8.1 |
mdmEcEntryConfigurable objects which define the modems error control
operation. MdmEcEntry .1.3.6.1.4.1.429.1.6.8.1.1 |
mdmEcIndexThis object contains the unique value assigned to this
modem in the chassis mib entity relation table and is used
as the mechanism for correctly indexing into this table.ro INTEGER .1.3.6.1.4.1.429.1.6.8.1.1.1 |
mdmEcMnp3DisDetermines if the modem will negotiate for MNP level 3
error correction. Default=enable.rw Enumeration .1.3.6.1.4.1.429.1.6.8.1.1.2 |
mdmEcMnp4DisDetermines if the modem will negotiate for MNP level 4
error correction. Default=enable.rw Enumeration .1.3.6.1.4.1.429.1.6.8.1.1.3 |
mdmEcMnpUnusualDetermines if the modem will attempt to negotiate for MNP
operation used in some early 2400bps modems.
Default=disable.rw Enumeration .1.3.6.1.4.1.429.1.6.8.1.1.4 |
mdmEcV42MnpHandshakeDetermines what types of error correction the modem will
attempt to negotiate. When configured for the default,
full V.42 and MNP, the modem first tries to connect with
V42 error control and then with MNP error control. When
set to disable either V42 or MNP the modem will only
attempt to negotiate the enabled protocol. When set to
disable the V42 detect phase, it is not included in the
handshaking process. This allows for faster connections
between V42 modems.rw Enumeration .1.3.6.1.4.1.429.1.6.8.1.1.5 |
mdmCs OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.9 |
mdmCsTableA table of modem status and call statistic parameters for
each modem in the chassis. SEQUENCE OF MdmCsEntry .1.3.6.1.4.1.429.1.6.9.1 |
mdmCsEntryObjects that define the modem status and statistics
specific to a the current connection when the modem is on
line or to the last connection when the modem is idle. MdmCsEntry .1.3.6.1.4.1.429.1.6.9.1.1 |
mdmCsIndexThe index value which uniquely identifies the modem to
which this entry is applicable. The value corresponds to
the index of the same modem in the entity table of the
chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.1 |
mdmCsStatusCurrent status of a modem including presence(idle),
availability(disabled), and call progress states.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.2 |
mdmCsLastNumberDialedOutAn ASCII string which represents the last phone number
dialed by the modem.ro DisplayString .1.3.6.1.4.1.429.1.6.9.1.1.3 |
mdmCsLastNumberDialedInAn ASCII string representing the last number dialed in(if
known). This is the 950-xxx (DNIS) number.ro DisplayString .1.3.6.1.4.1.429.1.6.9.1.1.4 |
mdmCsLastCallingPartyNumAn ASCII string representing the current or last party that
called this modem. Only known in ANI applications.ro DisplayString .1.3.6.1.4.1.429.1.6.9.1.1.5 |
mdmCsOriginateAnswerDefines whether the last or current call was originated or
answered.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.6 |
mdmCsRingsDefines the quantity of rings detected before the DTE
answered with DTR on the last incomming call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.7 |
mdmCsDisconnectReasonDefines the reason that the last call was terminated.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.8 |
mdmCsConnectFailReasonDefines the reason for failure if indeed the last call
attempt failed.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.9 |
mdmCsInitialTxLinkRateThe transmit speed at which the modem initialy connected on
it's last or current call.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.10 |
mdmCsInitialRxLinkRateThe receive speed at which the modem initialy connected on
it's previous or current call.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.11 |
mdmCsFinalTxLinkRateThe current transmit link rate of a connection, or the last
link rate of the last connection.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.12 |
mdmCsFinalRxLinkRateThe current receive link rate of a connection, or the last
link rate of the last connection.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.13 |
mdmCsModulationTypeSpecifies the current/final modulation type of the current
or last call. The value can be different from the object
mdmCsInitModulationType only for X2/V.90 calls.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.14 |
mdmCsSyncAsyncModeUsedDefines whether the current or last call was synchronous or
asynchronous.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.15 |
mdmCsErrorControlTypeSpecifies the Error control settings in the current or last
call. (short form)ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.16 |
mdmCsCompressionTypeSpecifies the data compression used in the current or last
call. (short format)ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.17 |
mdmCsEqualizationTypeSpecifies the equalization used in the current or last
call.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.18 |
mdmCsFallbackEnabledSpecifies whether line speed fallbacks were negotiated on
the current or previous call.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.19 |
mdmCsCharsSentSpecifies the number of characters sent on the current or
previous call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.20 |
mdmCsCharsReceivedSpecifies the number of characters received in the current
or previous call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.21 |
mdmCsOctetsSentSpecifies the number of octets sent in the current or
previous call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.22 |
mdmCsOctetsReceivedSpecifies the number of octets received in the current or
previous call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.23 |
mdmCsBlocksSentSpecifies the number of blocks sent in the current or
previous call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.24 |
mdmCsBlocksReceivedSpecifies the number of blocks received in the current or
previous call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.25 |
mdmCsBlocksResentSpecifies the number of blocks the modem has had to
retransmit due to block errors or timeouts in the current
or previous call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.26 |
mdmCsRetrainsRequestedSpecifies the number of retrains requested in the current
or previous call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.27 |
mdmCsRetrainsGrantedSpecifies the number of retrains granted in the current or
previous call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.28 |
mdmCsLineReversalQtySpecifies the number of times the HST high and low speeds
directions have been reversed in the current or previous
call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.29 |
mdmCsCharsLostSpecifies the number of characters lost on the current or
previous call. Not meaningful on synchronous calls.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.30 |
mdmCsBackChannelRateSpecifies the negotiated HST back channel speed on the
current or previous call.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.31 |
mdmCsBlerQtySpecifies the number of block errors received on the link
in the current or last call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.32 |
mdmCsLinkTimeoutQtySpecifies the number of link protocol timeouts on the
current or previous call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.33 |
mdmCsFallbackQtySpecifies the quantity of link speed fallbacks that occured
on the current or previous call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.34 |
mdmCsUpshiftQtySpecifies the number of link speed upshifts have occured in
the current or previous call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.35 |
mdmCsLinkNakQtySpecifies the quantity of negative acknowledgements sent in
response to errored blocks received on the link in the
current or previous call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.36 |
mdmCsGainHitCountThe modem calculates the gain that is required to adjust
the received signal to the ideal level. This defines the
number of times that the gain was recalculated durring the
current or previous call.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.37 |
mdmCsSecurityUserNameThe last dial security user that initiated the Call. This
object is not saved to NVRAM.ro DisplayString .1.3.6.1.4.1.429.1.6.9.1.1.38 |
mdmCsCallDurationThis is the length of the call in hh:mm:ss format. The
maximum value reported will be 9999:59:59.ro DisplayString .1.3.6.1.4.1.429.1.6.9.1.1.39 |
mdmCsCallRefNumCall Reference Numberro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.40 |
mdmCsPriCardSlotPrimary Card Slotro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.41 |
mdmCsTDMTimeSlotTime Division Multipexing Time Slotro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.42 |
mdmCsPriCardSpanLinePrimary Card Span Linero INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.43 |
mdmCsBChannelUsedB Channel Usedro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.44 |
mdmCsQCarrFreqTxTransmit carrier value (Hz).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.45 |
mdmCsQCarrFreqRxReceive carrier value (Hz).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.46 |
mdmCsQSymRateTxTransmit symbol rate.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.47 |
mdmCsQSymRateRxReceive symbol rate.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.48 |
mdmCsQTrellisTxTransmit Trellis coding.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.49 |
mdmCsQTrellisRxReceive Trellis coding.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.50 |
mdmCsQNonLinCdTxStatus of transmit non-linear coding.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.51 |
mdmCsQNonLinCdRxStatus of receive non-linear coding.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.52 |
mdmCsQPrecodingTxStatus of transmit precoding.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.53 |
mdmCsQPrecodingRxStatus of receive precoding.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.54 |
mdmCsQShapingTxStatus of transmit shaping.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.55 |
mdmCsQShapingRxStatus of receive shaping.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.56 |
mdmCsQPreemphTxTransmit pre-emphasis (-dBm).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.57 |
mdmCsQPreemphRxReceive pre-emphasis (-dBm).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.58 |
mdmCsQRxLevelReceive level (X 10) (-dBm).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.59 |
mdmCsQTxLevelTransmit level (X 10) (-dBm).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.60 |
mdmCsQSNRSignal to noise (x 10) (dB).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.61 |
mdmCsQNearEchoNear echo (x 10) (dB).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.62 |
mdmCsQFarEchoFar echo (x 10) (dB).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.63 |
mdmCsQRndTripDlyRound trip delay (msec).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.64 |
mdmCsQPacketSizeCurrCurrent packet size (bytes).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.65 |
mdmCsQPacketSizeLowMin. packet size (bytes).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.66 |
mdmCsQPacketSizeHighMax. packet size (bytes).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.67 |
mdmCsQCellTxLevelCurrCurrent Tx level cellular (x 10)(-dBm).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.68 |
mdmCsQCellTxLevelLowMin. Tx level cellular (x 10)(-dBm).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.69 |
mdmCsQCellTxLevelHighMax. Tx level cellular (x 10)(-dBm).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.70 |
mdmCsQSNRLevelCurrCurrent SNR level cellular (x 10) (-dBm).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.71 |
mdmCsQSNRLevelLowMin. SNR level cellular (x 10) (-dBm).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.72 |
mdmCsQSNRLevelHighMax. SNR level cellular (x 10) (-dBm).ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.73 |
mdmCsQCellularProtCurrent cellular protocol.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.74 |
mdmCsFreqProbeDataProbe frequency.ro OCTET STRING .1.3.6.1.4.1.429.1.6.9.1.1.75 |
mdmCsLevelProbeDataProbe level.ro OCTET STRING .1.3.6.1.4.1.429.1.6.9.1.1.76 |
mdmCsQTimingOffsetTiming Offset in parts per million.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.77 |
mdmCsQCarrierOffsetCarrier Offset in Hertz.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.78 |
mdmCsQCodingPCM Coding mu/A law Default=mulaw.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.80 |
mdmCsTrainingInfoTraining Informationro OCTET STRING .1.3.6.1.4.1.429.1.6.9.1.1.81 |
mdmCsX2signatureX2 diagnostics information from modem in hex.ro OCTET STRING .1.3.6.1.4.1.429.1.6.9.1.1.82 |
mdmCsX2Statusx2 status of modem.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.83 |
mdmCsCallTypeCall type information.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.84 |
mdmCsCallStartTimeCall started time in GMT format.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.85 |
mdmCsCallEndTimeCall Ended time in GMT format.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.86 |
mdmCsDigitalPadAttenuatedAttenuation of the digital pad in tenths of DB.ro INTEGER .1.3.6.1.4.1.429.1.6.9.1.1.87 |
mdmCsInitModulationTypeSpecifies the modulation type of the current or last call.
The value can be different from the object
mdmCsModulationType only for X2/V.90 calls.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.88 |
mdmCsRxMinSpeedCurrent/Last Session MIN Rx Speed.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.89 |
mdmCsRxMaxSpeedCurrent/Last Session MAX Rx Speed.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.90 |
mdmCsTxMinSpeedCurrent/Last Session MIN Tx Speed.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.91 |
mdmCsTxMaxSpeedCurrent/Last Session MAX Tx Speed.ro Enumeration .1.3.6.1.4.1.429.1.6.9.1.1.92 |
mdmCsCollectedDTMFDigitsThis object is an ASCII array of the DTMF digits collected
from the client.ro OCTET STRING .1.3.6.1.4.1.429.1.6.9.1.1.93 |
mdmEv OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.10 |
mdmEvTableA list of modem events. SEQUENCE OF MdmEvEntry .1.3.6.1.4.1.429.1.6.10.1 |
mdmEvEntryModem events that can be managed. MdmEvEntry .1.3.6.1.4.1.429.1.6.10.1.1 |
mdmEvIndexIndex into event table.ro INTEGER .1.3.6.1.4.1.429.1.6.10.1.1.1 |
mdmEvWatchdogTimoutsQuantity of times that a watchdog timeout has been detected
for this modem.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.2 |
mdmEvDteIdleTimoutsThe number of times that the modem has had no DTE activity
for the time specified by mdmEtDteIdleThresh.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.3 |
mdmEvInConnectEstabsThe number of times that the modem has reported a incomming
connection established event.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.4 |
mdmEvOutConnectEstabsThe number of times that the modem has reported an outgoing
connection established event.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.5 |
mdmEvInConnectTermsThe number of times the modem has reported an incomming
connection terminated event.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.6 |
mdmEvOutConnectTermsThe number of times the modem has reported an outgoing
connection termination event.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.7 |
mdmEvConnectAttemptFailsThe number of times the modem has reported a connect
attempt failure event. This does not include those connect
attempt failures that are reported due to no dial tone and
no loop current.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.8 |
mdmEvConnectTimoutsThe number of times that the NMC has detected a call that
has has a duration in excess of the threshold defined in
mdmEtConnectThresh.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.9 |
mdmEvMgmtBusFailuresThe number of times the NMC has been unable to get a
response from the modem to requests on the management bus.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.10 |
mdmEvResetByDtesThe number of times that the modem has been reset by the
DTE via the ATZ command or by DTR drop.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.11 |
mdmEvDtrFalsesThe number of times the modem has reported DTR False
events. The DTR false event timeout is based on
mdmEtDtrFalseThresh.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.12 |
mdmEvDtrTruesThe number of times the modem has reported DTR True events.
The modem reports these events to the NMC based on the
value of mdmEtDtrTrueTresh.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.13 |
mdmEvNoTonesThe number of times the modem reported no tones.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.14 |
mdmEvNoLoopsThe number of times the modem reported no loop current
events.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.15 |
mdmEvBlersThe number of times the modem reported BLERs.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.16 |
mdmEvFallBacksThe number of times the modem reported fall backs.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.17 |
mdmEvInConnectTimeCumulative counter for inbound call connect time.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.18 |
mdmEvInTotalBytesRxCumulative counter for number of bytes received on inbound
calls.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.19 |
mdmEvInTotalBytesTxCumulative counter for number of bytes transmitted on
inbound calls.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.20 |
mdmEvOutConnectTimeCumulative counter for outbound call connect time.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.21 |
mdmEvOutTotalBytesRxCumulative counter for number of bytes received on outbound
calls.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.22 |
mdmEvOutTotalBytesTxCumulative counter for number of bytes transmitted on
outbound calls.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.23 |
mdmEvInConnAttemptFailsThe number of times the modem has reported a inbound
connect attempt failure event. This does not include those
connect attempt failues that are reported due to no dial
time and no loop current.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.24 |
mdmEvOutConnAttemptFailsThe number of times the modem has reported a outbound
connect attempt failure event. This does not include those
connect attempt failures that are reported due to no dial
tone and no loop current.ro Counter .1.3.6.1.4.1.429.1.6.10.1.1.25 |
mdmEt OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.11 |
mdmEtTableTable of event thresholds used for setting up the modem to
report events that can in turn be monitored by RMON. SEQUENCE OF MdmEtEntry .1.3.6.1.4.1.429.1.6.11.1 |
mdmEtEntryEvent Thresholds that are used by the modem and the NMC to
qualify certain events. MdmEtEntry .1.3.6.1.4.1.429.1.6.11.1.1 |
mdmEtIndexIndex into table used to identify the the specific modem,
contians the unique value from the chassis mib entity
table.ro INTEGER .1.3.6.1.4.1.429.1.6.11.1.1.1 |
mdmEtDteIdleThreshDefines the length of time for the modem to wait before
reporting a 'DTE transmit data idle' event. (There must be
no activity on the DTE transmit line for the specified
quantity of minutes.rw INTEGER .1.3.6.1.4.1.429.1.6.11.1.1.2 |
mdmEtDtrFalseThreshDefines the quantity of seconds that will be used by the
modem to qualify a 'DTR False' event.rw INTEGER .1.3.6.1.4.1.429.1.6.11.1.1.3 |
mdmEtDtrTrueThreshDefines the quantity of seconds that the modem will use to
qualify a 'DTR True' event.rw INTEGER .1.3.6.1.4.1.429.1.6.11.1.1.4 |
mdmEtConnTimeLimitDefines the number of minutes that a call may be connected
before triggering the 'connect timer limit' event. A value
of zero for this limit means that no event is to be
detected (ie. no time limit).rw INTEGER .1.3.6.1.4.1.429.1.6.11.1.1.5 |
mdmEtBlerThreshDefines the number of BLERs that will be used to qualify
the 'BLER count at threshold' event for a given call.rw INTEGER .1.3.6.1.4.1.429.1.6.11.1.1.6 |
mdmEtFallbackThreshDefines the number of fallbacks at which the 'fallback
count at threshold' event will be generated for a given
call.rw INTEGER .1.3.6.1.4.1.429.1.6.11.1.1.7 |
mdmCd OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.12 |
mdmCdTableThe command table contains an entry for each modem
installed in a chassis. It provides a means for processing
actions requested by the management console. The mechanism
used is to set the command and get the result which will
indicate the success of the request. SEQUENCE OF MdmCdEntry .1.3.6.1.4.1.429.1.6.12.1 |
mdmCdEntryObjects that are used to request that certain actions be
taken by the modem itself or that the NMC take certain
actions for the modem. MdmCdEntry .1.3.6.1.4.1.429.1.6.12.1.1 |
mdmCdIndexThe index value which uniquely identifies the modem to
which this entry is applicable. The value corresponds to
the index of the corresponding modem in the entity table of
the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.6.12.1.1.1 |
mdmCdMgtStationIdThis object is a generic read-write variable that a
Management Station (MS) can use to guarantee that the
results from a given command are the results of a command
issued by that specific MS. Each MS must SET a unique
value to this object when doing commands and GET the value
of this object together with uchasCmdReqId and
uchasCmdResult to detect interference from other MSs.rw OCTET STRING .1.3.6.1.4.1.429.1.6.12.1.1.2 |
mdmCdReqIdThis object contains the value of the request-id field in
the SNMP PDU which invoked the most recent command or test
on this modem. If the request-id is unknown or undefined,
this object contains the value zero.rw INTEGER .1.3.6.1.4.1.429.1.6.12.1.1.3 |
mdmCdFunctionThis object contains a value that describes the command
that is being invoked.rw Enumeration .1.3.6.1.4.1.429.1.6.12.1.1.4 |
mdmCdForceIn certain cases the modem may be in
a state where certain
commands could adversely affect connectiuons. In such
cases, a command request with this object not present or
set to noForce will result in a warning. If the operator
elects to ignore such warnings, this object can be set to
force in a subsequent request to cause the command to be
carried out regardless of the potetialy hazzerdous effect.rw Enumeration .1.3.6.1.4.1.429.1.6.12.1.1.5 |
mdmCdParamThis object can contain parameters that are specific to the
particualar command being issued.rw OCTET STRING .1.3.6.1.4.1.429.1.6.12.1.1.6 |
mdmCdResultThis object contains the result of the most recently
requested command or test, or the value none(1) if no
commands have been requested since last reset.ro Enumeration .1.3.6.1.4.1.429.1.6.12.1.1.7 |
mdmCdCodeThe value of this object
indicates a further description
of what went wrong when a command fails.ro Enumeration .1.3.6.1.4.1.429.1.6.12.1.1.8 |
mdmTe OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.13 |
mdmTeTableA table containing an enable for each trap that a modem
entity is capable of generating. Some of these events
occur often and traps may flood the network if care is not
taken to avoid such conditions. These traps should be
enabled sparingly. (usually only when debugging a problem
on a particular modem) SEQUENCE OF MdmTeEntry .1.3.6.1.4.1.429.1.6.13.1 |
mdmTeEntryThere is one modem trap enable row for each modem entity in
the NAS chassis. MdmTeEntry .1.3.6.1.4.1.429.1.6.13.1.1 |
mdmTeIndexA unique index which identifies the modem for which these
trap enables pertain. The index to the trap enable table
matches the index of the corresponding modem in the entity
table in the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.6.13.1.1.1 |
mdmTeInConnEstablishedEnables generation of an SNMP trap upon detection of an
incoming connection establishment on the specified modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.2 |
mdmTeOutConnEstablishedEnables generation of an SNMP trap upon detection of an
outgoing connection establishment on the specified modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.3 |
mdmTeInConnTerminatedEnables generation of an SNMP trap upon detection of an
incoming connection termination on the specified modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.4 |
mdmTeOutConnTerminatedEnables generation of an SNMP trap upon detection of an
outgoing connection terminated on the specified modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.5 |
mdmTeConnAttemptFailureEnables generation of an SNMP trap upon detection of a
connection attemp failure on the specified modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.6 |
mdmTeConnLimitExpiredEnables generation of an SNMP trap upon detection of the
expiration of the connection time limit on the specified
modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.7 |
mdmTeDteXmitDataIdleEnables generation of an SNMP trap upon detection of DTE
transmit data idle on the specified modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.8 |
mdmTeDtrTrueEnables generation of an SNMP trap upon detection of DTR
going true on the specified modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.9 |
mdmTeDtrFalseEnables generation of an SNMP trap upon detection of DTR
going false on the specified modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.10 |
mdmTeBlerCountAtThreshEnables generation of an SNMP trap upon detection of the
BLER count at the specified threshold on the specified
modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.11 |
mdmTeFallbkCountAtThreshEnables generation of an SNMP trap upon detection of the
fallback count at the specified threshold on the specified
modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.12 |
mdmTeNoDialToneEnables generation of an SNMP trap upon detection of no
dial tone on the specified modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.13 |
mdmTeNoLoopCurrentEnables generation of an SNMP trap upon detection of no
loop current on the specified modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.14 |
mdmTeResetByDTEEnables generation of an SNMP trap upon detection of reset
by DTE on the specified modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.15 |
mdmTeDialOutCallDurEnables the dial out (from the NMC) call duration trap.
Default = disable(2).rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.16 |
mdmTeDialInCallDurEnables the dial in (to the NMC) call duration trap.
Default = disable(2).rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.17 |
mdmTePbActiveEnables the Packet Bus Active. Default = disable(2).rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.18 |
mdmTePbLostEnables the Packet Bus Lost trap. Default = disable(2).rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.19 |
mdmTeDteRingNoAnsEnables the Dte Ring No Answer trap. Default = disable(2).rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.20 |
mdmTePbClockLossEventThis object is used to disable the ability for a NAC to
report when the packet bus clock has been lost. Default =
disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.21 |
mdmTePbClockRestoreEventThis object is used to disable the ability for a NAC to
report when the packet bus clock has been restored.
Default = disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.22 |
mdmTeInConnAttemptFailEnables generation of a SNMP trap upon detection of an
inbound connection attempt failure on the specified modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.23 |
mdmTeOutConnAttemptFailEnables generation of a SNMP trap upon detection of an
outbound connection attempt failure on the specified modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.24 |
mdmTe105ResponderTestEnables generation of a SNMP trap upon detection of a 105
responder test on the specified modem.rw Enumeration .1.3.6.1.4.1.429.1.6.13.1.1.25 |
mdmLs OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.14 |
mdmLsTableA table defining all the Link Security parameters for each
modem in the chassis. SEQUENCE OF MdmLsTableEntry .1.3.6.1.4.1.429.1.6.14.1 |
mdmLsTableEntryLink Security parameters for a modem. These define the link
level security operations which take place when a call is
negotiated. MdmLsTableEntry .1.3.6.1.4.1.429.1.6.14.1.1 |
mdmLsIndexThe index which uniquely identifies the modem to which this
entry is applicable. The value corresponds to the value of
the index to the entity table in the chassis MIB that
corresponds to the same modem.ro INTEGER .1.3.6.1.4.1.429.1.6.14.1.1.1 |
mdmLsSecurityEnableAllows to disable/enable the dial security feature for the
modem.rw Enumeration .1.3.6.1.4.1.429.1.6.14.1.1.2 |
mdmLsFallbackPromptEnableDisables/enables the prompting by the called modem when the
auto pass password supplied by the caller fails or if no
password is supplied at all.rw Enumeration .1.3.6.1.4.1.429.1.6.14.1.1.3 |
mdmLsForcePromptEnableIf this is enabled, the modem will prompt the remote user
for a password regardless of the success of the modem to
negotiate the auto pass password.rw Enumeration .1.3.6.1.4.1.429.1.6.14.1.1.4 |
mdmLsLocAccPasswdEnableDisables/enables the Local Access Password feature used to
establish security check when accessing any security
setting.rw Enumeration .1.3.6.1.4.1.429.1.6.14.1.1.5 |
mdmLsDialBackEnableIf this is set to enable the modem, after successful
password validation, will disconnect and dial out to the
originating modem.rw Enumeration .1.3.6.1.4.1.429.1.6.14.1.1.6 |
mdmLsAutoPassPasswdContains the Auto Pass Password used for establishing Link
security during call negotiation.rw DisplayString .1.3.6.1.4.1.429.1.6.14.1.1.7 |
mdmLsLocalAccessPasswdContains the Local Access password used when accessing any
security setting and when Local Access password feature is
enabled.rw DisplayString .1.3.6.1.4.1.429.1.6.14.1.1.8 |
mdmLsAccountPasswdContains the fall back password which must be entered if
auto pass password is not satisfied.rw DisplayString .1.3.6.1.4.1.429.1.6.14.1.1.9 |
mdmHs OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.15 |
mdmHsTableA table containing the Hub security parameters accessible
in the modem. SEQUENCE OF MdmHsEntry .1.3.6.1.4.1.429.1.6.15.1 |
mdmHsEntryThere is one entry in this table for each modem entity
found in the chassis mib entity table. MdmHsEntry .1.3.6.1.4.1.429.1.6.15.1.1 |
mdmHsIndexAn index that uniquely identifies the modem to which this
row in the Hub Security table pertains. The value of this
index matches the value of the index for the corresonding
entity in the entity table of the Chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.6.15.1.1.1 |
mdmHsDialInEnableAllows the modem to be configured for dial-in security.
Enabling this effectively disables the modem's built-in
Link security operation. The default for this object is
disabled.rw Enumeration .1.3.6.1.4.1.429.1.6.15.1.1.2 |
mdmHsDialOutEnableAllows modems to be configured for dial-out security.
Enabling this effectively disables the modem's built-in
link security operation. The default value for this object
is disabled.rw Enumeration .1.3.6.1.4.1.429.1.6.15.1.1.3 |
mdmHsDtrDcdDelayAllows configuration of the time delay (in 100ths of a
second) between reciept of DTR and assertion of DCD when
the user on an incomming security call has successfully
compleated the security dialog. This object only applies
to modems using an RS232 like interface.rw INTEGER .1.3.6.1.4.1.429.1.6.15.1.1.4 |
mdmHsDtrDsrDelayAllows configuration of the delay (in 100ths of a second)
between detection of DTR and assertion of DSR when an
incomming security call has completed security negotiation
successfully.rw INTEGER .1.3.6.1.4.1.429.1.6.15.1.1.5 |
mdmAutoResponse OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.16 |
mdmArTableTable of auto response scripts for each modem in the
chassis. The number of table entries is specified by
modemNumber. SEQUENCE OF MdmArEntry .1.3.6.1.4.1.429.1.6.16.1 |
mdmArEntryList of configurable auto response scripts. MdmArEntry .1.3.6.1.4.1.429.1.6.16.1.1 |
mdmArIndexIndex in to the auto response table. This index contains
the unique value associated with the modem as defined in
the chassis mib entity table.ro INTEGER .1.3.6.1.4.1.429.1.6.16.1.1.1 |
mdmArIncomConnectEstabThis script is triggered when a Total Control WAN HUB modem
establishes a connection with a remote modem. The remote
modem is the caller.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.2 |
mdmArOutgoConnectEstabThis script is triggered when a Total Control WAN HUB modem
establishes a connection with a remote modem. The Total
Control WAN HUB modem is the caller.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.3 |
mdmArIncomConnectTermThis script is triggered after a remote modem has called a
Total Control WAN HUB modem, but the connection between
them terminated for some reason.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.4 |
mdmArOutgoConnectTermThis script is triggered after a Total Control WAN HUB
modem called a remote modem, but the connection between
them terminated for some reason.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.5 |
mdmArConnectAttemptFailThis script is triggered when a Total Control WAN HUB modem
fails to connect with a remote modem for an incoming or an
outgoing call.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.6 |
mdmArConnectTimeExpireThis script is triggered when a connection duration exceeds
the user defined connection time limit.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.7 |
mdmArResetByDteThis script is triggered when a modem has been reset by a
DTE.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.8 |
mdmArDteXmitIdleThis script is triggered when a modem's DTE remains idle
for specified amount of minutes that is defined by a user.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.9 |
mdmArBlersAtThreshThis script is triggered when a Total Control WAN HUB modem
receives a certain amount of block errors. This amount can
be configured by a user.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.10 |
mdmArFbacksAtThreshThis script is triggered when a Total Control WAN HUB modem
reaches a certain amount of fall backs within a single
session. This amount can be configured by a user.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.11 |
mdmArDialOutLoginFailThis script is triggered when a user, who is attempting to
dial out from a Total Control WAN HUB modem that supports
dial security, enters an invalid response to a prompt.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.12 |
mdmArDialOutRestrNumThis script is triggered when a user, who is attempting to
dial out from a Total Control WAN HUB modem that supports
dial security, uses a restricted number.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.13 |
mdmArDialInLoginFailThis script is triggered when a user, who is attempting to
dial in from a remote modem in to a Total Control WAN HUB
modem that supports dial security, enters an invalid
response to a prompt.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.14 |
mdmArDialBackRestrNumThis script is triggered when a user, who is attempting to
dial in from a remote modem in to a Total Control WAN HUB
modem that supports dial security, requests the Total
Control WAN HUB modem to dial back to a restricted number.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.15 |
mdmArDialBackRestModemThis script is triggered when a user, who is attempting to
dial in from a remote modem in to a Total Control WAN HUB
modem that supports dial security, requests the Total
Control WAN HUB modem to dial back using a restricted Total
Control WAN HUB modem.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.16 |
mdmArLoginAttemptsExceedThis script is triggered when a user, who is dialing in to
or out of the Total Control WAN HUB modem, exceeds the
number of correct user name/password response attempts.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.17 |
mdmArUserBlacklistedThis script is triggered when a user, who is dialing in to
or out of the Total Control WAN HUB modem, exceeds the
number of password prompt retries. At this point the user
becomes black listed.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.18 |
mdmArAttmpLoginByBlistUsrThis script is triggered when a user, who has been black
listed, is trying to dial in to or out of a Total Control
WAN HUB modem.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.19 |
mdmArRspAttemptLimExceedThis script is triggered when a user, who is dialing in to
or out of a Total Control WAN HUB modem, exceeds the number
of security prompt retries during a single dial security
session.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.20 |
mdmArWatchdogThis script is triggered when a software failure has
occurred on a modem.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.21 |
mdmArMgtBusFailureThis script is triggered when a contact with a modem, via
the management bus, has been lost.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.22 |
mdmArDtrTrueThis script is triggered when a modem's DTE transitions it
DTR line from low to high and holds it high for the
specified number of seconds. This amount is user
configurable.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.23 |
mdmArDtrFalseThis script is triggered when a modem's DTE transitions it
DTR line from high to low and holds it low for the
specified number of seconds. This amount is user
configurable.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.24 |
mdmArMdmRingNoAnswerThis script is triggered when a Total Control WAN HUB
modem, configured for auto answer, fails to answer an
incoming call within a specified number of rings. This
amount is user configurable.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.25 |
mdmArDteRingNoAnswerThis script is triggered when a DTE fials to raise DTR in
response to an incoming call for a specified amount of
rings. This amount is user configurable.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.26 |
mdmArNoDialToneThis script is triggered when a Total Control WAN HUB modem
goes off hook, but detects an inadequate dial tone level on
an analog phone line.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.27 |
mdmArNoLoopCurrentThis script is triggered when a Total Control WAN HUB modem
goes off hook, but it does not detect the presence of loop
current on an analog phone line.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.28 |
mdmArTimer1This script is triggered when the first general purpose
timer expires.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.29 |
mdmArTimer2This script is triggered when the second general purpose
timer expires.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.30 |
mdmArTimer3This script is triggered when the third general purpose
timer expires.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.31 |
mdmArTimer4This script is triggered when the fourth general purpose
timer expires.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.32 |
mdmArPacketBusActiveThis script is triggered when a packet bus active event is
detected by the modem.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.33 |
mdmArPacketBusLostThis script is triggered when a packet bus lost event is
detected by the modem.rw OCTET STRING .1.3.6.1.4.1.429.1.6.16.1.1.34 |
mdmCe OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.17 |
mdmCeTableA list of configurable Cellular Support object for a modem.
The number of table entries is given by modemNumber. SEQUENCE OF MdmCeEntry .1.3.6.1.4.1.429.1.6.17.1 |
mdmCeEntryObjects which define the Cellular characteristics for a
particular modem. MdmCeEntry .1.3.6.1.4.1.429.1.6.17.1.1 |
mdmCeIndexThis index value which uniquely identifies the modem to
which this entry is applicable. The value corresponds to
the index of the corresponding modem in the entity table of
the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.6.17.1.1.1 |
mdmCeMnp10DisThis object is bit 0 of S-register 60. It disable/enables
MNP10 negotiation mostly used with cellular operations.
(defualt=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.2 |
mdmCeMnpxDisThis object is bit 1 of S-register 60. It will
enable/disable the MNP extended services to be active
during negotiation. This will mean that MNP10 will use
V.42 to negotiate. (defualt=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.3 |
mdmCeCompThis object is bit 2 of S-register 60. It selects which
compression type will be negotiated if allowed by other
modem settings. (default =0>rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.4 |
mdmCeOperDisThis object is bit 3 of S-register 60. It announces that
at least one end of the link will be across a cellular
network. Therefore, the Dyncamic Transmit Algorithm will
be active. (default=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.5 |
mdmCeLinkSpeedThis object is bit 4 of register 60 tells the modem which
speed to establish the link at. (default=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.6 |
mdmCeShortFormRulesThis object is the S-register 61. It takes a value from 0
to 3 and regulates the V.42bis Short Form Negotiation
rules. The short form assumes that the maximum string
length is always 32 octets and that the direction of
compression is always bi-directional. (default=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.7 |
mdmCeDceBitraLimThis object is the S-register 64. It limits DCE bitrates
to values equal to or below the chosen setting. (default=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.8 |
mdmCeDceTxLevThis object is S-register 65. It selects DCE TX level to
use during cellular operations. (default=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.9 |
mdmCeV42EtcDisThis object is the bit 0 of S-register 66. It
enables/disables ETC. (default=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.10 |
mdmCeV42CellSiteThis object is the bit 1 of S-register 66. It selects
fixed or mobile site operations. (default=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.11 |
mdmCeV42EtcCallToneDisThis object is the bit 2 of S-register 66. It
enables/disables ETC calling tone. (default=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.12 |
mdmCeV42EtcTxLevConDisThis object is the bit 3 of S-register 66. It
enables/disables forced ETC TX level control. (default=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.13 |
mdmCeDceStartRateThis object is the bits 4 and 5 of S-register 66. It sets
the DCE startup rate. (default=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.14 |
mdmCeV42DceTxDemDisThis object is the bit 6 of S-register 66. It
enables/disables DCE TX De-emphasis. (default=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.15 |
mdmCeMnp10FallbackDisThis object is the bit 5 of S-register 60. It
enables/disables MNP10 fallback. (default=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.16 |
mdmCeMnp10FallforDisThis object is the bit 6 of S-register 60. It
enables/disables MNP10 fallforward. (default=0)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.17 |
mdmCeDbNoEtcDisThis object is the bit 7 of S-register 66. It
enables/disables non-ETC originate mode.
(default=0/disable)rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.18 |
mdmCeMnpxDetPhEnaThis object is the bit 7 of S-register 60. It
enables/disables the MNPX detection phase during connection
establishment. (default=0/enable).rw Enumeration .1.3.6.1.4.1.429.1.6.17.1.1.19 |
mdmSts OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.18 |
mdmStsTableA table containing configuration information for each NAC
in the NAS chassis that supports packet bus datagrams. SEQUENCE OF MdmStsEntry .1.3.6.1.4.1.429.1.6.18.1 |
mdmStsEntryThere is one configuration row for each modem entity. MdmStsEntry .1.3.6.1.4.1.429.1.6.18.1.1 |
mdmStsIndexA unique value for each card in the chassis. The value of
this object matches the value of the index of the
corresponding card's entry in the entity table of the
chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.6.18.1.1.1 |
mdmStsPbClockThis object defines the current status of the packet bus
clock.ro Enumeration .1.3.6.1.4.1.429.1.6.18.1.1.2 |
mdmMa OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.6.19 |
mdmMaTableA Mapping table entry, containing objects which define the
card level configuration each modem is mapped to and the
unique change indicator. SEQUENCE OF MdmMaEntry .1.3.6.1.4.1.429.1.6.19.1 |
mdmMaEntryObjects which define the Mapping and Status for a
particular modem. MdmMaEntry .1.3.6.1.4.1.429.1.6.19.1.1 |
mdmMaIndexThis index value which uniquely identifies the modem to
which this entry is applicable. The value corresponds to
the index of the corresponding modem in the entity table of
the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.6.19.1.1.1 |
mdmMaChangeIndicatorA value of changed indicates that the card level
configuration for a specific channel on a HDM is not the
one in use on that channel.ro Enumeration .1.3.6.1.4.1.429.1.6.19.1.1.2 |
mdmMaChannelConfigValues of group(1), group(2), group(3), group(4) represent
the HDM card level configuration of 1..4 used by this
channel.rw Enumeration .1.3.6.1.4.1.429.1.6.19.1.1.3 |