USR-ATMCFG-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for USR-ATMCFG-MIB.
7
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
7 total| Object Name |
|---|
IMPORTSUSR Specific ATM Config table. SEQUENCE OF UsrAtmCfgEntry .1.3.6.1.4.1.429.4.52.1 |
usrAtmCfgEntryAn entry in the Atm Configuration table. UsrAtmCfgEntry .usrAtmCfgTable.1 |
usrAtmIfNameThis object is the identifier of a ATM (AAL)
Interface on a managed device. DisplayString (SNMPv2-TC) .usrAtmCfgTable.1.1 |
usrSigAdminStatusThe desired state of Signalling on a desired interface.
The interface name, specified by usrAtmIfName represents
the AAL interface to enable or disable signalling on. If
the state is 'enable' then signalling messages will flow
on the interface. If the state is changed to disable,
then all signalling messages will stop on the interface.rw Enumeration .usrAtmCfgTable.1.2 |
usrSigOperStatusThe actual state of Signalling on a desired interface.
This state should follow the state set by
usrSigAdminStatus.ro Enumeration .usrAtmCfgTable.1.3 |
usrIlmiAdminStatusThe desired state of ILMI on a desired interface. The
interface name, specified by usrAtmIfName represents the
AAL interface to enable or disable ILMI on. If the state
is 'enable' then ILMI messages will flow on the
interface. If the state is changed to disable, then all
ILMI messages will stop on the interface.rw Enumeration .usrAtmCfgTable.1.4 |
usrIlmiOperStatusThe actual state of ILMI on a desired interface. This
state should follow the state set by usrSigAdminStatus.ro Enumeration .usrAtmCfgTable.1.5 |