USR-ATM-1483-PVC-MIB
The USR-ATM-1483-PVC-MIB enables monitoring and management of Permanent Virtual Circuit (PVC) parameters, including status, traffic counters, and configuration attributes, on CommWorks Netserver ATM hardware. This module specifically facilitates the tracking of ATM Layer 2 connectivity metrics and PVC state transitions for the USR-ATM-1483 device family.
Imported Objects
Objects
16 total| Object Name |
|---|
usrAtm1483PvcThe commWorks enterprise defined MIB objects for
the Netserver ATM. MODULE-IDENTITY .1.3.6.1.4.1.77.1.1.47 |
IMPORTSThe commWorks enterprise defined MIB objects for
the Netserver ATM. Unknown .1.3.6.1.4.1.77.1.1.47 |
usrAtm1483PvcConfigFileNameThe name of a ConfigFile to read/write permanent
database records. If the value of this object is an
empty string, then ATM 1483 uses the default
name `@file://Atm1483.cfg'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.47.1 |
usrAtm1483PvcCFMStatusFlagSetting the value of this object to `save' causes the values
of the ATM ARP MIB objects to be written out to the
current config file, which is stored in the
usrIpoaArpConfigFileName object. While the new
ConfigFile is being written, ATM ARP
will set the value of this flag to `saving''. Any
attempts to set the value while it is not `normal'
(i.e. the file is currently being written to the
ConfigFile) while result in a badValue error being
returned. Setting the value to `normal' will result in no
action.rw UsrConfigStatus .1.3.6.1.4.1.77.1.1.47.2 |
usrAtm1483PvcTableThis usrAtm1483PvcTable keeps a set of PVCs and
creates a corresponding entry in the appropriate
protocol ARP cache or equivalent. SEQUENCE OF UsrAtm1483PvcEntry .1.3.6.1.4.1.77.1.1.47.3 |
usrAtm1483PvcEntryA PVC that this host has opened with another host for
data transfer of datagrams using the encapsulation
specified in RFC1483. Additional information
can be determined about the VC from RFC1695, the AToM MIB.
When an entry is added to this table, if the corresponding
network protocol is IP, an entry is added to the
ipNetToMediaTable (ARP Cache) to allow the translation of
an IP address to the RFC1483 PVC created in this table,
and the PVC created in the RFC1695 AToM MIB. UsrAtm1483PvcEntry .1.3.6.1.4.1.77.1.1.47.3.1 |
usrAtm1483PvcNameA string containing the name of the RFC1483 PVC. DisplayString .1.3.6.1.4.1.77.1.1.47.3.1.1 |
usrAtm1483PvcVpiThe VPI value for the RFC1483 PVC.rw AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.77.1.1.47.3.1.2 |
usrAtm1483PvcVciThe VCI value for the RFC1483 PVC.rw AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.77.1.1.47.3.1.3 |
usrAtm1483PvcPortThe port number for the RFC1483 PVC.rw Integer32 .1.3.6.1.4.1.77.1.1.47.3.1.4 |
usrAtm1483PvcPcrThe peak cell rate value to use when creating this PVC.rw Integer32 .1.3.6.1.4.1.77.1.1.47.3.1.5 |
usrAtm1483PvcNetworkNameA string containing the name of the network of this RFC1483 PVC.rw DisplayString .1.3.6.1.4.1.77.1.1.47.3.1.6 |
usrAtm1483PvcNetworkAddrThe network layer address of the end station that this
RFC1483 PVC connects to. This value is placed in the
ARP cache as a static entry so that the IP forwarder
may map traffic destined for this network address to
this RFC1483 PVC.rw IpAddress .1.3.6.1.4.1.77.1.1.47.3.1.7 |
usrAtm1483PvcProtocolThe Level 3 protocol running over this RFC1483 PVC.ro Enumeration .1.3.6.1.4.1.77.1.1.47.3.1.8 |
usrAtm1483PvcRowStatusThis object allows rows to be created and deleted in the
usrAtm1483PvcTable. For a PVC on an IP network, an entry
in this table will have a corresponding ipNetToMediaEntry
to allow the translation of an IP address to this PVC. Setting
this object to destroy(6) removes the corresponding
ipNetToMediaTable entry, if any.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.47.3.1.9 |
usrAtm1483PvcDefaultPcrAn integer containing the default peak cell rate to use
when establishing VCs. This value is one tenth the speed
of the physical interface expressed as a cell rate.ro Integer32 .1.3.6.1.4.1.77.1.1.47.4 |
More MIBs from Lanmanager
Browse all LanmanagerMIBs →The USR-USER-MAN-MIB facilitates the monitoring and management of user authentication sessions, active login states, and access control policies on commWorks (US Robotics) network infrastructure devices. This module enables administrators to track real-time user connectivity metrics and enforce security configurations via SNMP.
The Cip-MIB provides enterprise-specific SNMP objects for monitoring and managing commWorks CIP (Common Industrial Protocol) devices, enabling the tracking of industrial automation session states, communication errors, and device operational parameters.
The USR-VHA-MIB provides SNMP management access for commWorks VHA (Virtual Host Appliance) devices, enabling monitoring of virtualization-specific metrics such as session states, resource utilization, and interface statistics. This module facilitates the tracking of virtual host availability and performance parameters critical for maintaining the operational integrity of commWorks virtual infrastructure.
The USR-FA-MIB provides management objects for monitoring Wireless Foreign Agent session states, tunnel configurations, and mobility parameters on CommWorks enterprise wireless infrastructure. This module enables the tracking of mobile node registration, handover events, and Foreign Agent resource utilization within a Mobile IP environment.
Standard SNMP MIB module defining data structures for UsrUserMan-MIB.
The ROBOEXEC-RESOURCES-MIB defines commWorks enterprise-specific objects for monitoring system resource utilization and operational status of RoboExec appliances. This module provides granular visibility into device health metrics, including CPU load, memory consumption, and process states, enabling administrators to track performance thresholds and resource exhaustion on RoboExec hardware.