USR-VHA-MIB
AI MIB Summary
The USR-VHA-MIB provides SNMP management access for commWorks VHA (Virtual Host Appliance) devices, enabling monitoring of virtualization-specific metrics such as session states, resource utilization, and interface statistics. This module facilitates the tracking of virtual host availability and performance parameters critical for maintaining the operational integrity of commWorks virtual infrastructure.
The commWorks enterprise defined MIB objects for VHA
Main OID:
usrVHA.1.3.6.1.4.1.77.1.1.84
224
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
224 total| Object Name |
|---|
usrVHAThe commWorks enterprise defined MIB objects for VHA MODULE-IDENTITY .1.3.6.1.4.1.77.1.1.84 |
IMPORTSThe commWorks enterprise defined MIB objects for VHA as implemented" -- REVISION "200112192300Z" -- .1.3.6.1.4.1.77.1.1.84 |
usrVHAConnConfig OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.1 |
usrVHARegTimerThis is the A10 connection registration Lifetime
timer. The timer is started at the time of
establishment of an A10 connection and updated
during periodic re-registrations of the A10
connection. The A10 connection is cleared on expiry
of this timer. The default value of the timer is
1800 seconds. When this value is equal to 65535,
then the timer has infinite lifetime. If this value
is equal to zero, then A10 connection has been
released.rw Integer32 .1.3.6.1.4.1.77.1.1.84.1.1 |
usrVHARegUpdateTimerNumber of seconds to wait for the Registration
Acknowledge message from the PCF.rw Integer32 .1.3.6.1.4.1.77.1.1.84.1.2 |
usrVHARegUDPPortUDP port number used by the RP interface to
communicate with the PCF. The default value
for this parameter is 699.rw Integer32 .1.3.6.1.4.1.77.1.1.84.1.3 |
usrVHAServiceOption7Toggle for controlling Service Option 7 on the
RP interface.
Obsolete: This object is no longer used.rwobsolete Enumeration .1.3.6.1.4.1.77.1.1.84.1.4 |
usrVHAServiceOption15Toggle for controlling Service Option 15 on the
RP interface.
Obsolete: This object is no longer used.rwobsolete Enumeration .1.3.6.1.4.1.77.1.1.84.1.5 |
usrVHAServiceOption22Toggle for controlling Service Option 22 on the
RP interface.
Obsolete: This object is no longer used.rwobsolete Enumeration .1.3.6.1.4.1.77.1.1.84.1.6 |
usrVHAServiceOption23Toggle for controlling Service Option 23 on the
RP interface.
Obsolete: This object is no longer used.rwobsolete Enumeration .1.3.6.1.4.1.77.1.1.84.1.7 |
usrVHAServiceOption24Toggle for controlling Service Option 24 on the
RP interface.
Obsolete: This object is no longer used.rwobsolete Enumeration .1.3.6.1.4.1.77.1.1.84.1.8 |
usrVHAServiceOption25Toggle for controlling Service Option 25 on the
RP interface.
Obsolete: This object is no longer used.rwobsolete Enumeration .1.3.6.1.4.1.77.1.1.84.1.9 |
usrVHAServiceOption33Toggle for controlling Service Option 33 on the
RP interface.
Obsolete: This object is no longer used.rwobsolete Enumeration .1.3.6.1.4.1.77.1.1.84.1.10 |
usrVHAMaxSessionsMaximum number of active sessions that this PDSN is
allowed to process on its RP interface port.
This value is MAX_SIMULTANEOUS_USERS + 1 and is
dependent on the component being builtrw Integer32 .1.3.6.1.4.1.77.1.1.84.1.11 |
usrVHARegUpdateRetransNumber of times to retransmit the Registration
Update message if the PCF does not send a
Registration Acknowledge message or a Registration
Request message (with accounting related information
and Lifetime set to zero).
The current implementation only supports the
range 1..20rw Integer32 .1.3.6.1.4.1.77.1.1.84.1.12 |
usrVHAMonitorRPToggle to enable or disable monitoring of
raw data over RP Interfacerw Enumeration .1.3.6.1.4.1.77.1.1.84.1.13 |
usrVHAPrintDataLimitNumber in bytes displayed by R-P Protocol monitorrw Integer32 .1.3.6.1.4.1.77.1.1.84.1.14 |
usrVHAResetStatsResets VHA Statistics to zero.
1: Resets all the statistics.
2: Resets Connection statistics.
3: Resets GRE statistics.
4: Resets Registration statistics.
5: Resets Registration Denied statistics.
6: Resets Update statistics.
7: Resets Update Denied statistics.
8: Resets Security Violations statistics.
**NOTE: this object is deprecated and replaced by
usrVHAStatsResetTime.
Behaviour: setting usrVHAResetStats to any value 1..8
will result in the same behaviour as setting
usrVHAStatsResetTime to 0: All stats will be reset.rwdeprecated Integer32 .1.3.6.1.4.1.77.1.1.84.1.15 |
usrVHAZeroPadSecretThis MIB Object is Deprecatedrw Enumeration .1.3.6.1.4.1.77.1.1.84.1.16 |
usrVHAStatsResetTimeReading:
Time the VHA statistics counters were last
reset. The VHA statistics are valid from
usrVHAStatsResetTime until present.
Resetting counters causes a discontinuity in
the monotonically increasing value of counters.
Management stations that sample these counters
need also to sample this object so that they
can know that a discontinuity occurred with
respect to the previous sample. Its value is
number of seconds since EPOCH. EPOCH is
seconds since 00:00:00 UTC, Jan 1, 1970.
Writing:
Writing 0 causes update of usrVHAStatsResetTime
and the VHA counters to be reset to 0:
usrVHAConnStats group scalars
usrVHARegReqStats group scalars
usrVHARegUpdStats group scalars
usrVHASecurViolStats group scalars
This object replaces usrVHAResetStatsrw Time1970 .1.3.6.1.4.1.77.1.1.84.1.17 |
usrVHAGreFragmentSizeFragment size used by GRE to fragment data pktsrw Integer32 .1.3.6.1.4.1.77.1.1.84.1.18 |
usrVHAGreFragmentationThe VHA module will use GRE fragmentation based on this
flag and the GRE Fragment Sizerw Enumeration .1.3.6.1.4.1.77.1.1.84.1.19 |
usrVHAEncodeIMSITHis setting will determine if the Accounting
feature (IMSI Encoding) for Motorola is enabledrw Enumeration .1.3.6.1.4.1.77.1.1.84.1.20 |
usrVHAMotg160RPToggle to enable or disable sending out DAI CVSE in RP_REG_REPLYrw Enumeration .1.3.6.1.4.1.77.1.1.84.1.21 |
usrVHATimingWindowSizeThe configurable parameter ranged at 1-10 seconds would utilized to
control the working timing window size for the call events flow regulation
for non-turbo moderw Integer32 .1.3.6.1.4.1.77.1.1.84.1.22 |
usrVHARNNDynInfoAllow a dynamic RNN key value to be used in
place of the configured shared secret and SPIrw Enumeration .1.3.6.1.4.1.77.1.1.84.1.23 |
usrVHARNNDynSPIThe dynamic SPI value obtained from the FACNro UsrSpecialU32 .1.3.6.1.4.1.77.1.1.84.1.24 |
usrVHAFilterAccessThis is for setting the filter access for all the
VHA interfaces.rw Enumeration .1.3.6.1.4.1.77.1.1.84.1.25 |
usrVHAInFilterThe name of the input filter for all VHA interfaces.rw DisplayString .1.3.6.1.4.1.77.1.1.84.1.26 |
usrVHAOutFilterThe name of the output filter for all VHA interfaces.rw DisplayString .1.3.6.1.4.1.77.1.1.84.1.27 |
usrVHASyncPPPDetermines whether or not the VHA module will support Sync PPP protocol (0x880B)rw Enumeration .1.3.6.1.4.1.77.1.1.84.1.28 |
usrVHASoftBusyStatusWill put the PDSN VHA interface in the SoftBusy state (ENABLE)
or get the VHA out of the SoftBusy state (DISABLE)rw Enumeration .1.3.6.1.4.1.77.1.1.84.1.29 |
usrVHAConnStats OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.2 |
usrVHATotalConnInitsTotal number of A10/A11 connections initiated.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.2.1 |
usrVHATotalConnReleasNumber of A10/A11 connections released since the last counter reset.
usrVHATotalConnReleas is the sum of the following values:
[usrVHATotalConnReleas] = [usrVHATotalRPConnDeRegistered]
+ [usrVHATotalConnExps]
+ [usrVHATotalRPConnOther]
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.2.2 |
usrVHATotalConnExpsTotal number of A10/A11 connections cleared due
to expiry of Trp without receiving a periodic
Registration Request with lifetime greater than
zero.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.2.3 |
usrVHATotalIngressCountTotal number of Ingress Filtering Caused Releases.
Counter epoch is indicated by usrVHAStatsResetTime.
Obsolete: This object is not supported.roobsolete Counter32 .1.3.6.1.4.1.77.1.1.84.2.4 |
usrVHAConnStatsTableA table of all existings A10/A11 connections between
PCF and PDSN. SEQUENCE OF UsrVHAConnStatsEntry .1.3.6.1.4.1.77.1.1.84.2.5 |
usrVHAConnStatsEntryAn entry in the RP Connection Statistics Table.
Counter epoch is indicated by usrVHAStatsResetTime. UsrVHAConnStatsEntry .1.3.6.1.4.1.77.1.1.84.2.5.1 |
usrVHAConnSessionIndexPDSN's RP interface can support up to 4000 sessions.
This value indicates the session number assigned
to the connection by the PDSN.ro Integer32 .1.3.6.1.4.1.77.1.1.84.2.5.1.1 |
usrVHAConnSessionIDThis four octet value, along with the PCF-IP-
Address and the PDSN-IP-Address, identifies
the A10 connection on behalf of a packet data
session. This value is set to the MN-Proxy-Id
assigned to a packet data session by the PCF.
This Key value is also inserted in the Key field
of every GRE frame containing user data sent over
the A10/A11 connection.ro Unsigned32 .1.3.6.1.4.1.77.1.1.84.2.5.1.2 |
usrVHAConnRNAddrThis four octet value identifies the IP address of
the PCF that terminates the A10 connection.ro IpAddress .1.3.6.1.4.1.77.1.1.84.2.5.1.3 |
usrVHAConnMNIDThis two octet field is used to differentiate
multiple sessions at a mobile node. MN Connection
ID is determined by the PCF.ro Integer32 .1.3.6.1.4.1.77.1.1.84.2.5.1.4 |
usrVHAConnIMSIThe International Mobile Subscriber Identifier.ro DisplayString .1.3.6.1.4.1.77.1.1.84.2.5.1.5 |
usrVHAConnLifetimeGrantedThe number of seconds granted before registration
is considered expired. A value of zero indicates
a request for deregistration. A value of 65535
indicates infinity.ro Integer32 .1.3.6.1.4.1.77.1.1.84.2.5.1.6 |
usrVHAConnLifetimeRemainingThe number of seconds remaining before registration
is considered expired.ro Integer32 .1.3.6.1.4.1.77.1.1.84.2.5.1.7 |
usrVHAConnGREPktsRcvdThe number of GRE encapsulated packets received
from IP.ro Counter32 .1.3.6.1.4.1.77.1.1.84.2.5.1.8 |
usrVHAConnGREPktsTransThe number of GRE encapsulated packets delivered
to IP for transmission.ro Counter32 .1.3.6.1.4.1.77.1.1.84.2.5.1.9 |
usrVHAConnGREBytesRcvdThe number of GRE encapsulated bytes received
from IP. The GRE header bytes are not counted.ro Counter32 .1.3.6.1.4.1.77.1.1.84.2.5.1.10 |
usrVHAConnGREBytesTransThe number of GRE encapsulated bytes delivered
to IP for transmission. The GRE header bytes are
not countedro Counter32 .1.3.6.1.4.1.77.1.1.84.2.5.1.11 |
usrVHAConnSessionStatusThe RP session is considered active when an Airlink
Record Identifier, inside the Vendor/Organization
Specific Extension of the Registration Request,
is set to RP ACTIVE START.ro Enumeration .1.3.6.1.4.1.77.1.1.84.2.5.1.12 |
usrVHAConnHomeAddrIpaddress associated with this connectionro IpAddress .1.3.6.1.4.1.77.1.1.84.2.5.1.13 |
usrVHAUserNameUser name associated with this connectionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.84.2.5.1.14 |
usrVHACallTypeCall Type for this connectionro Enumeration .1.3.6.1.4.1.77.1.1.84.2.5.1.15 |
usrVHAPPPResetTimeTime when the PPP was reset.
This is NTP time, it will give number of seconds
since Jan 1, 1900.ro Time1900 .1.3.6.1.4.1.77.1.1.84.2.5.1.16 |
usrVHAPPPSetupTimeTime when the PPP was first established
This is NTP time, it will give number of seconds
since Jan 1, 1900.ro Time1900 .1.3.6.1.4.1.77.1.1.84.2.5.1.17 |
usrVHAPPPIdletimeRemainingThe number of seconds remaining before PPP session
is considered expired.ro Integer32 .1.3.6.1.4.1.77.1.1.84.2.5.1.18 |
usrVHASessionDurationThe duration in seconds of the current session.ro Unsigned32 UNITS "Seconds" .1.3.6.1.4.1.77.1.1.84.2.5.1.19 |
usrVHAServiceOptionThe value of service option recieved by PDSN over A11 interface.ro Enumeration .1.3.6.1.4.1.77.1.1.84.2.5.1.20 |
usrVHATotalRPConnTotal Number of RP connections
Obsolete: This was a value that went up and down.
A syntax of Counter32 is invalid for this behavior.
This object has been replaced by usrVHASessionsCurrent.roobsolete Counter32 .1.3.6.1.4.1.77.1.1.84.2.6 |
usrVHATotalRPConnDeRegisteredTotal Number of RP connections released,
due to a valid deregistration request.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.2.7 |
usrVHATotalRPConnPPPLayerCmdTotal Number of RP connections released,
cause: PPP Layer Command
Counter epoch is indicated by usrVHAStatsResetTime.
Obsolete: This object is not supported.roobsolete Counter32 .1.3.6.1.4.1.77.1.1.84.2.8 |
usrVHATotalRPConnOtherTotal Number of RP connections released,
cause: other reasonsro Counter32 .1.3.6.1.4.1.77.1.1.84.2.9 |
usrVHAIMSIStatsTableA table of all existings calls with their IMSI values. SEQUENCE OF UsrVHAIMSIStatsEntry .1.3.6.1.4.1.77.1.1.84.2.10 |
usrVHAIMSIStatsEntryAn entry in the IMSI Association Table. UsrVHAIMSIStatsEntry .1.3.6.1.4.1.77.1.1.84.2.10.1 |
usrVHAIMSISessionIndexPDSN's RP interface can support up to 4000 sessions.
This value indicates the session number assigned
to the connection by the PDSN.ro Integer32 .1.3.6.1.4.1.77.1.1.84.2.10.1.1 |
usrVHAIMSIDecodedASCIIThe International Mobile Subscriber Identifier in
Decoded ASCII format.ro DisplayString .1.3.6.1.4.1.77.1.1.84.2.10.1.2 |
usrVHAIMSIEncodedASCIIThe International Mobile Subscriber Identifier in
Encoded ASCII format.ro DisplayString .1.3.6.1.4.1.77.1.1.84.2.10.1.3 |
usrVHASessionsCurrentCurrent number of RP sessions (sum of active and dormant)ro Gauge32 UNITS "RP Sessions" .1.3.6.1.4.1.77.1.1.84.2.11 |
usrVHAActiveSessionsCurrentCurrent number of active RP sessionsro Gauge32 UNITS "RP Sessions" .1.3.6.1.4.1.77.1.1.84.2.12 |
usrVHAAccessNetworkIdentifierTableA table of Access Network Identifiers(ANIDs) received by PDSN. SEQUENCE OF UsrVHAAccessNetworkIdentifierEntry .1.3.6.1.4.1.77.1.1.84.2.13 |
usrVHAAccessNetworkIdentifierEntryAn entry in the VHA Access Network Identifier(ANID) Table. UsrVHAAccessNetworkIdentifierEntry .1.3.6.1.4.1.77.1.1.84.2.13.1 |
usrVHAAccessNetworkIdentifierAccess Network Identifier(ANID) of the PCF received by PDSN over A11. OCTET STRING .1.3.6.1.4.1.77.1.1.84.2.13.1.1 |
usrVHAAccessNetworkIpAddrIpaddress of the PCF that holds this ANIDro IpAddress .1.3.6.1.4.1.77.1.1.84.2.13.1.2 |
usrVHARegReqStats OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.3 |
usrVHARegReqRcvdTotal number of RP Registration Requests
received.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.1 |
usrVHARegRepAcceptTotal number of Registration Replies accepted.
The code information element inside the Registration
Accept message is equal to zero.
Counter epoch is indicated by usrVHAStatsResetTime.
Obsolete:
This object has been replaced by usrVHARegReqAcceptroobsolete Counter32 .1.3.6.1.4.1.77.1.1.84.3.2 |
usrVHADeRegReqRcvdTotal number of valid Registration Requests
received with a Lifetime of zero (requests
to deregister).
Deprecated - This counter is replaced by
usrVHADeRegReqAccept
Counter epoch is indicated by usrVHAStatsResetTime.rodeprecated Counter32 .1.3.6.1.4.1.77.1.1.84.3.3 |
usrVHADeRegRepAcceptTotal number of Registration Replies accepted
in response to a deregistration request. The code
information element inside the Registration Accept
message is equal to zero.
Counter epoch is indicated by usrVHAStatsResetTime.
Obsolete:
This object has been replaced by usrVHADeRegReqAcceptroobsolete Counter32 .1.3.6.1.4.1.77.1.1.84.3.4 |
usrVHARegDenUnspecifiedTotal number of RP Registration Requests denied due
to an unspecified reason. The code information
element inside the Registration Accept message is
equal to 128.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.5 |
usrVHARegDenAdmProhibitedTotal number of RP Registration Requests denied due
to an administrative decision. The code information
element inside the Registration Accept message is
equal to 129.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.6 |
usrVHARegDenNoResourcesTotal number of RP Registration Requests denied due
to insufficient resources. The code information
element inside the Registration Accept message is
equal to 130.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.7 |
usrVHARegDenAuthFailTotal number of RP Registration Requests denied due
to mobile node's failed authentication. The code
information element inside the Registration Accept
message is equal to 131.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.8 |
usrVHARegDenIDMismatchTotal number of RP Registration Requests denied due
to an identification mismatch. The code information
element inside the Registration Accept message is
equal to 133.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.9 |
usrVHARegDenPoorlyFormedReqTotal number of RP Registration Requests denied due
to a poorly formed request. The code information
element inside the Registration Accept message is
equal to 134.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.10 |
usrVHARegDenUnknownPDSNAddrTotal number of RP Registration Requests denied due
to an unknown PDSN address. The code information
element inside the Registration Accept message is
equal to 136.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.11 |
usrVHARegDenReverseTunnelUnavailTotal number of RP Registration Requests denied due
to unavailability of requested reverse tunnel.
The code information element inside the Registration
Accept message is equal to 137.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.12 |
usrVHARegDenReverseTunnelRequiredTotal number of RP Registration Requests denied due
to 'T' bit not set. This bit is part of the Flags
information element inside the Registration Request
message. The code information element inside the
Registration Accept message is equal to 138.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.13 |
usrVHARegDenUnsupportedVendorIDTotal number of RP Registration Requests denied due
to an unrecognized Vendor ID field that is inside
the Vendor/Organization Specific Extension
information element. The code information element
inside the Registration Accept message is equal to
141.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.14 |
usrVHARegReqDeniedTotal number of Registration Requests denied
usrVHARegReqDenied is the sum of these values:
[usrVHARegReqDenied] = [usrVHARegReqInitDenied]
+ [usrVHAReRegReqDenied]
+ [usrVHADeRegReqDenied]
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.15 |
usrVHARegReqDiscardTotal number of Registration Requests from the PCF
silently discarded without being processed by the PDSN
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.16 |
usrVHARegReqInitAcceptNumber of Initial Registration Requests accepted
from the PCF.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.17 |
usrVHARegReqInitDeniedNumber of Initial Registration Requests denied
from the PCF.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.18 |
usrVHAReRegReqAcceptNumber of Re-Registration Requests accepted
from the PCF.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.19 |
usrVHAReRegReqDeniedNumber of Re-Registration Requests denied
from the PCF.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.20 |
usrVHADeRegReqDeniedNumber of De-Registration Requests denied
from the PCF.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.21 |
usrVHARegReqAcceptTotal number of Registration Requests accepted
from the PCF.
usrVHARegReqAccept is the sum of these values:
[usrVHARegReqAccept] = [usrVHARegReqInitAccept]
+ [usrVHAReRegReqAccept]
+ [usrVHADeRegReqAccept]
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.22 |
usrVHADeRegReqAcceptTotal number of DeRegistration Requests accepted
from the PCF.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.3.23 |
usrVHARegUpdStats OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.4 |
usrVHARegUpdateTotal number of valid Registration Updates
transmitted to PCF.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.1 |
usrVHARegAcknowledgeTotal number of Registration Acknowledgements
received from the PCF with status code of zero.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.2 |
usrVHARegAckUnspecifiedTotal number of Registration Acknowledgements
received from the PCF with status code of 128 (reason
unspecified).
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.3 |
usrVHARegAckAdmProhibitedTotal number of Registration Acknowledgements
received from the PCF with status code of 129
(administratively prohibited).
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.4 |
usrVHARegAckFailedAuthTotal number of Registration Acknowledgements
received from the PCF with status code of 131
(sending node - PDSN - failed authentication).
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.5 |
usrVHARegAckIDMismatchTotal number of Registration Acknowledgements
received from the PCF with status code of 133
(identification mismatch).
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.6 |
usrVHARegAckPoorlyFormedTotal number of Registration Acknowledgements
received from the PCF with status code of 134
(poorly formed Registration Update).
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.7 |
usrVHATotalRegUpdateDeniedTotal number of Registration Updates denied by the RAN.
usrVHATotalRegUpdateDenied is the sum of these values:
[usrVHATotalRegUpdateDenied] = [usrVHARegAckUnspecified]
+ [usrVHARegAckAdmProhibited]
+ [usrVHARegAckFailedAuth]
+ [usrVHARegAckIDMismatch]
+ [usrVHARegAckPoorlyFormed]
+ [usrVHARegAckDeniedOther]
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.8 |
usrVHATotalRegUpdateNotAckusrVHATotalRegUpdateNotAck is incremented if
the expected registration acknowledge is
not received from the PCF within the time Tregupd.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.9 |
usrVHATotalRegUpdateInitTransTotal number of Initial Registration Updates transmitted
to PCF.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.10 |
usrVHATotalRegUpdateReTransTotal number of Registration Updates re-transmitted
to PCF.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.11 |
usrVHARegUpdateDiscardTotal number of Registration Updates discarded
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.12 |
usrVHARegUpdateTransRPLifeExpNumber of Registration Updates transmitted,
due to RP lifetime expiration
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.13 |
usrVHARegUpdateTransPPPLayerCmdNumber of Registration Updates transmitted,
due to PPP layer command
Counter epoch is indicated by usrVHAStatsResetTime.
OBSOLETE: This object is not supported.roobsolete Counter32 .1.3.6.1.4.1.77.1.1.84.4.14 |
usrVHARegUpdateTransOtherNumber of Registration Updates transmitted,
due to other reasons
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.15 |
usrVHATotalRegAckRcvdTotal number of Registration Acknowledgements received
from the PCF.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.16 |
usrVHARegAckDeniedOtherTotal number of Registration Acknowledgements
received from PCF with a status code that is currently
not further speficied by the PDSN.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.4.17 |
usrVHASecurConfig OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.5 |
usrVHASecurConfigTableA table for configuring mobility security
associations between the Radio Node and the
PDSN. SEQUENCE OF UsrVHASecurConfigEntry .1.3.6.1.4.1.77.1.1.84.5.1 |
usrVHASecurConfigEntryAn entry in the PDSN Security Configuration Table. UsrVHASecurConfigEntry .1.3.6.1.4.1.77.1.1.84.5.1.1 |
usrVHASecurSAIndexRP interface can support up to 512 mobility
security associations. - The range has been changed
from 1-100 to 1-512 for PDSN Rel 4.0ro Integer32 .1.3.6.1.4.1.77.1.1.84.5.1.1.1 |
usrVHASecurRNAddrThe IP Address of the Radio Node with which
this RP interface shares the mobility security
association.rw IpAddress .1.3.6.1.4.1.77.1.1.84.5.1.1.2 |
usrVHASecurSPIThe SPI is the 4-byte opaque index within the
Mobility Security Association which selects the
specific security parameters to be used to
authenticate the Radio Node.rw UsrSpecialU32 .1.3.6.1.4.1.77.1.1.84.5.1.1.3 |
usrVHASecurSharedSecretKeyThe shared secret key for the security associations.
Reading this object will always return zero length
value for SNMP.rw UsrSecretDisplay .1.3.6.1.4.1.77.1.1.84.5.1.1.4 |
usrVHASecurTimeDriftThe value represents how close the timestamp,
contained in the Identification information element
of the Registration Request or the Registration
Acknowledge message, should be to the PDSN's time
of day clock. This time tolerance is used in
conjunction with timestamp replay protection
against replay attacks.rw Integer32 .1.3.6.1.4.1.77.1.1.84.5.1.1.5 |
usrVHASecurStatusThis object is used to add, modify, and delete
rows for the security association table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.84.5.1.1.6 |
usrVHASecurAuthFlagToggle to enable or disable authentication of
A11 messages over RP Interfacerw Enumeration .1.3.6.1.4.1.77.1.1.84.5.1.1.7 |
usrVHAZeroPadSecretEntryThis setting will determine whether
to zero pad secrets of less than 16rw Enumeration .1.3.6.1.4.1.77.1.1.84.5.1.1.8 |
usrVHASecurViolStats OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.6 |
usrVHASecurTotalViolationsTotal number of RP security violations encountered
by this PDSN.
usrVHASecurTotalViolations is the sum of these values:
[usrVHASecurTotalViolations] = [usrVHASecurMissingMSA]
+ [usrVHASecurBadAuthenticator]
+ [usrVHASecurBadSPI]
+ [usrVHASecurMissingMHAuthExt]
+ [usrVHASecurMissingRUAuthExt]
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.6.1 |
usrVHASecurMissingMSATotal number of RP security violations due to missing
or improper Mobility Security Association (MSA)
between the PCF and the PDSN.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.6.2 |
usrVHASecurBadAuthenticatorTotal number of RP security violations due to bad
Authenticator field. This field is part of either
Mobile-Home Authentication Extension information
element or the Registration Update Authentication
Extension information element.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.6.3 |
usrVHASecurBadIdentificationTotal number of security violations due to bad
Identification information element. This eight
octet element is used by the PCF and the PDSN for
matching the Registration Requests with Registration
Replies and Registration Updates with Registration
Acknowledge messages. It also protects against the
replay attacks (section 5.6, RFC 2002).
Counter epoch is indicated by usrVHAStatsResetTime.
Deprecated:
This object is a duplicate of usrVHARegDenIDMismatch.rodeprecated Counter32 .1.3.6.1.4.1.77.1.1.84.6.4 |
usrVHASecurBadSPITotal number of RP security violations due to bad
SPI field. This field is part of either
Mobile-Home Authentication Extension information
element or the Registration Update Authentication
Extension information element.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.6.5 |
usrVHASecurMissingMHAuthExtTotal number of RP security violations due to missing
Mobile-Home Authentication Extension inside the
Registration Request message.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.6.6 |
usrVHASecurMissingRUAuthExtTotal number of RP security violations due to missing
Registration Update Authentication Extension inside
the Registration Acknowledge message.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.6.7 |
usrVHASecurViolationTableA table containing information about security
violations. SEQUENCE OF UsrVHASecurViolationEntry .1.3.6.1.4.1.77.1.1.84.6.8 |
usrVHASecurViolationEntryInformation about a particular security violation. UsrVHASecurViolationEntry .1.3.6.1.4.1.77.1.1.84.6.8.1 |
usrVHASecurViolatorTableIndexPDSN can store up to 100 entries for a particular
security violation based on the violator's IP
address.ro Integer32 .1.3.6.1.4.1.77.1.1.84.6.8.1.1 |
usrVHASecurViolatorAddressViolator's IP address. This address may not
be in the Mobility Security Association table.ro IpAddress .1.3.6.1.4.1.77.1.1.84.6.8.1.2 |
usrVHASecurViolationCounterTotal number of security violations coming from the
this violator's IP address.ro Counter32 .1.3.6.1.4.1.77.1.1.84.6.8.1.3 |
usrVHASecurRecentViolationSPISPI of the most recent security violation coming
from this IP address. If the security violation is
due to an identification mismatch, then this is the
SPI from the Mobile-Home Authentication Extension.
If the security violation is due to an invalid
authenticator, then this is the SPI from the
offending authentication extension. In all other
cases, it should be set to zero.ro UsrSpecialU32 .1.3.6.1.4.1.77.1.1.84.6.8.1.4 |
usrVHASecurRecentViolationTimeTime of the most recent security violation coming
from this IP address.
This is NTP time, it will give number of seconds
since Jan 1, 1900.ro Time1900 .1.3.6.1.4.1.77.1.1.84.6.8.1.5 |
usrVHASecurRecentViolationIDLowLow-order 32 bits of identification used in
Registration Request or Registration Acknowledge
of the most recent security violation coming
from this IP address.ro UsrRegID .1.3.6.1.4.1.77.1.1.84.6.8.1.6 |
usrVHASecurRecentViolationIDHighHigh-order 32 bits of identification used in
Registration Request or Registration Acknowledge
of the most recent security violation coming
from this IP address.ro UsrRegID .1.3.6.1.4.1.77.1.1.84.6.8.1.7 |
usrVHASecurRecentViolationReasonReason for the most recent security violation coming
from this IP address.ro Enumeration .1.3.6.1.4.1.77.1.1.84.6.8.1.8 |
usrVHAGREStats OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.7 |
usrVHATotalGREPktsRcvdTotal number of GRE encapsulated packets received
from IP.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.7.1 |
usrVHATotalGREPktsTransTotal number of GRE encapsulated packets delivered
to IP for transmission.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.7.2 |
usrVHATotalGREBytesRcvdTotal number of GRE encapsulated bytes received
from IP. The GRE header bytes are not counted.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.7.3 |
usrVHATotalGREBytesTransTotal number of GRE encapsulated bytes delivered
to IP for transmission. The GRE header bytes are
not counted.
Counter epoch is indicated by usrVHAStatsResetTime.ro Counter32 .1.3.6.1.4.1.77.1.1.84.7.4 |
usrVHACfmConfig OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.8 |
usrVHAConfigFileNameThe name of the configuration file for VHA. If
this value is empty, then the default file name
is @file://VHAProcess.cfg.ro DisplayString .1.3.6.1.4.1.77.1.1.84.8.1 |
usrVHACfmStatusThe Configuration File Manager Flag for
saving VHA configurable parameters.rw UsrConfigStatus .1.3.6.1.4.1.77.1.1.84.8.2 |
usrVHATraps OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.9 |
usrVHATrapsv2The events for VHA traps OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.9.0 |
usrVHARegistrationRequestAuthFailureThis trap is generated when authentication fails
on the Registration Request message. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.84.9.0.1 |
usrVHARegistrationAcknowledgeAuthFailureThis trap is generated when authentication fails on
the Registration Acknowledge message. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.84.9.0.2 |
usrVHASessionsCriticalAlarmThe SNMP trap that is generated when
usrVHASessionsAlarmsState goes to 'critical' and
usrVHASessionsAlarmsEnabled is 'true'
This alarm occurs when the sum of active and dormant RP session
reaches or exceeds the critical threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.84.9.0.3 |
usrVHASessionsMajorAlarmThe SNMP trap that is generated when
usrVHASessionsAlarmsState goes to 'major' and
usrVHASessionsAlarmsEnabled is 'true'
This alarm occurs when the sum of active and dormant RP session
reaches or exceeds the major threshold while state is 'clear'
but does not reach or exceed the critical threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.84.9.0.4 |
usrVHASessionsClearAlarmThe SNMP trap that is generated when
usrVHASessionsAlarmsState goes to 'clear' and
usrVHASessionsAlarmsEnabled is 'true'
This alarm occurs when the sum of active and dormant RP session
falls to or below the 'clear' threshold after a 'major' or
'critical' alarm has been declared. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.84.9.0.5 |
usrVHAActiveSessionsCriticalAlarmThe SNMP trap that is generated when
usrVHAActiveSessionsAlarmsState goes to 'critical' and
usrVHAActiveSessionsAlarmsEnabled is 'true'
This alarm occurs when the number of active RP session
reaches or exceeds the critical threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.84.9.0.6 |
usrVHAActiveSessionsMajorAlarmThe SNMP trap that is generated when
usrVHAActiveSessionsAlarmsState goes to 'major' and
usrVHAActiveSessionsAlarmsEnabled is 'true'
This alarm occurs when the number of active RP session
reaches or exceeds the major threshold while state is 'clear'
but does not reach or exceed the critical threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.84.9.0.7 |
usrVHAActiveSessionsClearAlarmThe SNMP trap that is generated when
usrVHAActiveSessionsAlarmsState goes to 'clear' and
usrVHAActiveSessionsAlarmsEnabled is 'true'
This alarm occurs when the number of active RP session
falls to or below the 'clear' threshold after a 'major' or
'critical' alarm has been declared. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.84.9.0.8 |
usrVHAFailedSessionsCriticalAlarmThe SNMP trap that is generated when
usrVHAFailedSessionsAlarmsState goes to 'clear' and
usrVHAFailedSessionsAlarmsEnabled is 'true'
This alarm occurs when the RP Failed Sessions as measured
number of RP Reg Req Denied in the last measurement interval
falls to or below the 'clear' threshold after a 'major' or
'critical' alarm has been declared. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.84.9.0.9 |
usrVHAFailedSessionsMajorAlarmThe SNMP trap that is generated when
usrVHAFailedSessionsAlarmsState goes to 'major' and
usrVHAFailedSessionsAlarmsEnabled is 'true'
This alarm occurs when the RP Failed Sessions as measured
number of RP Reg Req Denied in the last measurement interval
reaches or exceeds the major threshold while state is 'clear'
but does not reach or exceed the critical threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.84.9.0.10 |
usrVHAFailedSessionsClearAlarmThe SNMP trap that is generated when
usrVHAFailedSessionsAlarmsState goes to 'major' and
usrVHAFailedSessionsAlarmsEnabled is 'true'
This alarm occurs when the RP Failed Sessions as measured
number of RP Reg Req Denied in the last measurement interval
falls to or below the 'clear' threshold after a 'major' or
'critical' alarm has been declared. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.84.9.0.11 |
usrVHAPktThroughputCriticalAlarmThe SNMP trap that is generated when
usrVHAPktThroughputAlarmsState goes to 'clear' and
usrVHAPktThroughputAlarmsEnabled is 'true'
This alarm occurs when the RP Packet Throughput as measured
number of RP packets sent or received in last interval
falls to or below the 'clear' threshold after a 'major' or
'critical' alarm has been declared. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.84.9.0.12 |
usrVHAPktThroughputMajorAlarmThe SNMP trap that is generated when
usrVHAPktThroughputAlarmsState goes to 'major' and
usrVHAPktThroughputAlarmsEnabled is 'true'
This alarm occurs when the RP Packet Throughput as measured
number of RP packets sent or received in last interval
reaches or exceeds the major threshold while state is 'clear'
but does not reach or exceed the critical threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.84.9.0.13 |
usrVHAPktThroughputClearAlarmThe SNMP trap that is generated when
usrVHAPktThroughputAlarmsState goes to 'clear' and
usrVHAPktThroughputAlarmsEnabled is 'true'
This alarm occurs when the RP Packet Throughput as measured
number of RP packets sent or received in last interval
falls to or below the 'clear' threshold after a 'major' or
'critical' alarm has been declared. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.84.9.0.14 |
usrVHAPM OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.10 |
usrVHASessionsPM OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.10.1 |
usrVHASessionsCriticalAlarmThreshThe critical alarm threshold for usrVHASessionsCurrent gauge.
The value of this object will be automatically set to the
lesser of usrVHAMaxSessions or the internal VHA Max session
limit, whichever is less.
IF usrVHASessionsAlarmState is not 'critical' and the current
gauge value is equal or greater than this threshold,
THEN usrVHASessionsAlarmState will change to 'critical'.
See usrVHASessionsAlarmState for TRAP generation details.ro Unsigned32 UNITS "RP Sessions" .1.3.6.1.4.1.77.1.1.84.10.1.1 |
usrVHASessionsMajorAlarmThreshThe major alarm threshold for usrVHASessionsCurrent gauge.
The allowed range of this object is 0 to usrVHAMaxSessions.
The object is also constrained to be less than or equal to
usrVHASessionsCriticalAlarmThresh.
If usrVHAMaxSessions is reduced below the value of this object,
this object will automatically reduced so that this constraint
holds. Value of 0 disables this threshold.
IF this object is set to a non-zero value equal or
less than the current value of usrVHASessionsClearAlarmThresh,
THEN usrVHASessionsClearAlarmThresh will be automatically
reduced to a valid value.
This value is set indirectly by setting
usrVHASessionsMajorAlarmThreshPct
Changing threshold values causes the alarm state to be
re-evaluated.
IF usrVHASessionsAlarmState is 'clear' and the
current gauge value is equal or greater than this
threshold, and the current gauge value is less than non-zero
usrVHASessionsCriticalAlarmThresh, and the threshold is not 0,
THEN usrVHASessionsAlarmState will change to 'major'.
See usrVHASessionsAlarmState for TRAP generation details.ro Unsigned32 UNITS "RP Sessions" .1.3.6.1.4.1.77.1.1.84.10.1.2 |
usrVHASessionsClearAlarmThreshThe alarm clear threshold for usrVHASessionsCurrent gauge.
The allowed range of this object is 0 to usrVHAMaxSessions.
This object must also be less than non-zero
usrVHASessionsMajorAlarmThresh and
usrVHASessionsCricalAlarmThresh.
IF usrVHASessionsMajorAlarmThresh is non zero,
THEN object must be less than usrVHASessionsMajorAlarmThresh.
This value is set indirectly by setting
usrVHASessionsClearAlarmThreshPct
Changing the threshold value causes the alarm state to be
re-evaluated.
IF usrVHASessionsAlarmState is not 'clear' and the
current gauge value is equal or less than this threshold,
THEN usrVHASessionsAlarmState will change to 'clear'.
See usrVHASessionsAlarmState for TRAP generation details.ro Unsigned32 UNITS "RP Sessions" .1.3.6.1.4.1.77.1.1.84.10.1.3 |
usrVHASessionsMajorAlarmThreshPctThe major alarm threshold for usrVHASessionsCurrent gauge
expressed as a percentage of usrVHAMaxSessions.
The allowed range of this object is 0 to 100.
Writing this object causes usrVHASessionsMajorAlarmThresh to
be re-calculated.
Writing usrVHASessionsMajorAlarmThresh causes this object
to be re-calculated.
See usrVHASessionsMajorAlarmThresh for effects of changing
threshold value such as causing the alarm state to be
re-evaluated.rw Integer32 .1.3.6.1.4.1.77.1.1.84.10.1.4 |
usrVHASessionsClearAlarmThreshPctThe clear alarm threshold for usrVHASessionsCurrent gauge
expressed as a percentage of usrVHAMaxSessions.
The allowed range of this object is 0 to 100.
Writing this object causes usrVHASessionsClearAlarmThresh to
be re-calculated.
Writing usrVHASessionsClearAlarmThresh causes this object
to be re-calculated.
See usrVHASessionsClearAlarmThresh for effects of changing
threshold value such as causing the alarm state to be
re-evaluated.rw Integer32 .1.3.6.1.4.1.77.1.1.84.10.1.5 |
usrVHASessionsTrapsEnabledThis object controls trap generation when
usrVHASessionAlarmState changes.
See usrVHASessionsAlarmState for alarm details.rw Enumeration .1.3.6.1.4.1.77.1.1.84.10.1.6 |
usrVHASessionsAlarmStateAlarm state is maintained by PDSN by comparing
usrVHASessionsCurrent
with critical, major, and clear alarm thresholds.
IF alarm state changes to critical, AND
usrVHASessionsTrapsEnabled is true
THEN usrVHASessionsCriticalAlarm TRAP will be sent.
IF alarm state changes to major, AND
usrVHASessionsTrapsEnabled is true
THEN usrVHASessionsMajorAlarm TRAP will be sent.
IF alarm state changes to clear, AND
usrVHASessionsTrapsEnabled is true
THEN usrVHASessionsCriticalAlarm TRAP will be sent.
IF alarm state changes,
THEN usrVHASessionsAlarmTime is updated with the
current time regardless of usrVHASessionsTrapsEnabled
and usrVHASessionsAlarmChanges is incremented.
This allows alarm state and time information to be retrieved
by SNMP management stations that don't support SNMP traps or
when traps are intentionally disabled to reduce trap
processing load on the SNMP management station.
Writing a 'clear' value will force the alarm state to
go to 'clear'. This will count as a state change and
cause a trap if the state was 'major' or 'critical'.
This step conceptually occurs before comparing the
alarm thresholds. If major or critical thresholds are
exceeded, the appropriate state change and trap occur.
This means that writing 'clear' may cause 0, 1, or 2
alarm state changes and traps.rw Enumeration .1.3.6.1.4.1.77.1.1.84.10.1.7 |
usrVHASessionsAlarmTimeThe time of the last usrVHASessionsAlarmState state change.
If the state has never changed, this value will be zero.ro Time1970 .1.3.6.1.4.1.77.1.1.84.10.1.8 |
usrVHASessionsAlarmChangesCount of usrVHASessionsAlarmState changes.ro Counter32 .1.3.6.1.4.1.77.1.1.84.10.1.9 |
usrVHAActiveSessionsPM OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.10.2 |
usrVHAActiveSessionsCriticalAlarmThreshThe critical alarm threshold for usrVHAActiveSessionsCurrent
gauge.
The allowed range of this object is 0 to usrVHAMaxSessions.
If usrVHAMaxSessions is reduced below the value of this object,
this object will automatically reduced so that this constraint
holds. Object value of 0 disables this alarm and threshold..
IF this object is set to a non-zero value equal or less than
the current value of usrVHAActiveSessionsMajorAlarmThresh,
THEN usrVHAActiveSessionsMajorAlarmThresh will be automatically
reduced to a valid value.
IF this object is set to a non-zero value equal or less than
the current value of usrVHAActiveSessionsClearAlarmThresh,
THEN usrVHAActiveSessionsClearAlarmThresh will be automatically
reduced to a valid value.
This value is set indirectly by setting
usrVHAActiveSessionsCriticalAlarmThreshPct
Changing threshold values causes the alarm state to be
re-evaluated.
IF usrVHAActiveSessionsAlarmState is not 'critical' and
the current gauge value is equal or greater than this
critical threshold, and this critical threshold is non-zero,
THEN usrVHAActiveSessionsAlarmState will change to
'critical'.
See usrVHAActiveSessionsAlarmState for TRAP generation details.ro Unsigned32 UNITS "RP Sessions" .1.3.6.1.4.1.77.1.1.84.10.2.1 |
usrVHAActiveSessionsMajorAlarmThreshThe major alarm threshold for usrVHAActiveSessionsCurrent
gauge.
The allowed range of this object is 0 to usrVHAMaxSessions.
The object is also constrained to be less than or equal to
usrVHAActiveSessionsCriticalAlarmThresh.
If usrVHAMaxSessions is reduced below the value of this object,
this object will automatically reduced so that this constraint
holds. Value of 0 disables this threshold.
IF this object is set to a non-zero value equal or
less than the current value of
usrVHAActiveSessionsClearAlarmThresh,
THEN usrVHAActiveSessionsClearAlarmThresh will be automatically
reduced to a valid value.
This value is set indirectly by setting
usrVHAActiveSessionsMajorAlarmThreshPct
Changing threshold values causes the alarm state to be
re-evaluated.
IF usrVHAActiveSessionsAlarmState is 'clear' and the current
gauge value is equal or greater than this threshold, and the
current gauge value is less than non-zero
usrVHAActiveSessionsCriticalAlarmThresh, and the threshold is
not zero,
THEN usrVHAActiveSessionsAlarmState will change to 'major'.
See usrVHAActiveSessionsAlarmState for TRAP generation details.ro Unsigned32 UNITS "RP Sessions" .1.3.6.1.4.1.77.1.1.84.10.2.2 |
usrVHAActiveSessionsClearAlarmThreshThe alarm clear threshold for usrVHAActiveSessionsCurrent
gauge.
The allowed range of this object is 0 to usrVHAMaxSessions.
This object must also be less than non-zero
usrVHAActiveSessionsMajorAlarmThresh and non-zero
usrVHAActiveSessionsCricalAlarmThresh.
This value is set indirectly by setting
usrVHAActiveSessionsClearAlarmThreshPct
Changing the threshold value causes the alarm state to be
re-evaluated.
IF usrVHAActiveSessionsAlarmState is not 'clear' and
the current gauge value is equal or less than this threshold,
THEN usrVHAActiveSessionsCriticalAlarmState will change to
'clear'.
See usrVHAActiveSessionsAlarmState for trap generation details.ro Unsigned32 UNITS "RP Sessions" .1.3.6.1.4.1.77.1.1.84.10.2.3 |
usrVHAActiveSessionsCriticalAlarmThreshPctThe major alarm threshold for usrVHAActiveSessionsCurrent
gauge expressed as a percentage of usrVHAMaxSessions.
The allowed range of this object is 0 to 100.
Writing this object causes
usrVHAActiveSessionsMajorAlarmThresh to be re-calculated.
Writing usrVHAActiveSessionsMajorAlarmThresh causes this object
to be re-calculated.
See usrVHAActiveSessionsMajorAlarmThresh for effects of
changing threshold value such as causing the alarm state to be
re-evaluated.rw Integer32 .1.3.6.1.4.1.77.1.1.84.10.2.4 |
usrVHAActiveSessionsMajorAlarmThreshPctThe major alarm threshold for usrVHAActiveSessionsCurrent
gauge expressed as a percentage of usrVHAMaxSessions.
The allowed range of this object is 0 to 100.
Writing this object causes
usrVHAActiveSessionsMajorAlarmThresh to be re-calculated.
Writing usrVHAActiveSessionsMajorAlarmThresh causes this object
to be re-calculated.
See usrVHAActiveSessionsMajorAlarmThresh for effects of
changing threshold value such as causing the alarm state to be
re-evaluated.rw Integer32 .1.3.6.1.4.1.77.1.1.84.10.2.5 |
usrVHAActiveSessionsClearAlarmThreshPctThe clear alarm threshold for usrVHAActiveSessionsCurrent
gauge expressed as a percentage of usrVHAMaxSessions.
The allowed range of this object is 0 to 100.
Writing this object causes
usrVHAActiveSessionsClearAlarmThresh to be re-calculated.
Writing usrVHAActiveSessionsClearAlarmThresh causes this object
to be re-calculated.
See usrVHAActiveSessionsClearAlarmThresh for effects of
changing threshold value such as causing the alarm state to be
re-evaluated.rw Integer32 .1.3.6.1.4.1.77.1.1.84.10.2.6 |
usrVHAActiveSessionsTrapsEnabledThis object controls trap generation when
usrVHASActiveSessionsAlarmState changes.
See usrVHAActiveSessionsAlarmState for alarm details.rw Enumeration .1.3.6.1.4.1.77.1.1.84.10.2.7 |
usrVHAActiveSessionsAlarmStateAlarm state is maintained by PDSN by comparing
usrVHAActiveSessionsCurrent
with critical, major, and clear alarm thresholds.
IF alarm state changes to critical, AND
usrVHAActiveSessionsTrapsEnabled is true
THEN usrVHAActiveSessionsCriticalAlarm TRAP will be sent.
IF alarm state changes to major, AND
usrVHAActiveSessionsTrapsEnabled is true
THEN usrVHAActiveSessionsMajorAlarm TRAP will be sent.
IF alarm state changes to clear, AND
usrVHAActiveSessionsTrapsEnabled is true
THEN usrVHAActiveSessionsCriticalAlarm TRAP will be sent.
IF alarm state changes,
THEN usrVHAActiveSessionsAlarmTime is updated with
the current time regardless of usrVHAActiveSessionsTrapsEnabled
and usrVHAActiveSessionsAlarmChanges is incremented.
This allows alarm state and time information to be retrieved
by SNMP management stations that don't support SNMP traps or
when traps are intentionally disabled to reduce trap
processing load on the SNMP management station.
Writing a 'clear' value will force the alarm state to
go to 'clear'. This will count as a state change and
cause a trap if the state was 'major' or 'critical'.
This step conceptually occurs before comparing the
alarm thresholds. If major or critical thresholds are
exceeded, the appropriate state change and trap occur.
This means that writing 'clear' may cause 0, 1, or 2
alarm state changes and traps.rw Enumeration .1.3.6.1.4.1.77.1.1.84.10.2.8 |
usrVHAActiveSessionsAlarmTimeTime last usrVHAActiveSessionsAlarmState state change.
If the state has never changed, this value will be zero.ro Time1970 .1.3.6.1.4.1.77.1.1.84.10.2.9 |
usrVHAActiveSessionsAlarmChangesCount of usrVHAActiveSessionsAlarmState changes.ro Counter32 .1.3.6.1.4.1.77.1.1.84.10.2.10 |
usrVHAFailedSessionsPM OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.10.3 |
usrVHAFailedSessionsCriticalAlarmThreshThe critical alarm threshold for usrVHAFailedSessionsValue
gauge.
Object value of 0 disables this alarm and threshold.
IF this object is set to a non-zero value equal or less than
the current value of usrVHAFailedSessionsMajorAlarmThresh,
THEN usrVHAFailedSessionsMajorAlarmThresh will be automatically
reduced to a valid value.
IF this object is set to a non-zero value equal or less than
the current value of usrVHAFailedSessionsClearAlarmThresh,
THEN usrVHAFailedSessionsClearAlarmThresh will be automatically
reduced to a valid value.
Agent is allowed to either reject a SET which violates
these constraints, or adjust the object value such that the
constraints hold.
Changing threshold values causes the alarm state to be
re-evaluated.
IF usrVHAFailedSessionsAlarmState is not 'critical' and
the current gauge value is equal or greater than this
critical threshold, and this critical threshold is non-zero,
THEN usrVHAFailedSessionsAlarmState will change to
'critical'.
See usrVHAFailedSessionsAlarmState for TRAP generation details.rw Unsigned32 UNITS "RP Sessions" .1.3.6.1.4.1.77.1.1.84.10.3.1 |
usrVHAFailedSessionsMajorAlarmThreshThe major alarm threshold for usrVHAFailedSessionsValue
gauge.
Value of 0 disables this threshold.
IF this object is set to a non-zero value equal or less than
the current value of usrVHAFailedSessionsClearAlarmThresh,
THEN usrVHAFailedSessionsClearAlarmThresh will be automatically
reduced to a valid value.
This value is set indirectly by setting
usrVHAFailedSessionsMajorAlarmThreshPct
Changing threshold values causes the alarm state to be
re-evaluated.
IF usrVHAFailedSessionsAlarmState is 'clear' and the current
gauge value is equal or greater than this threshold, and the
current gauge value is less than non-zero
usrVHAFailedSessionsCriticalAlarmThresh, and the threshold is
not zero,
THEN usrVHAFailedSessionsAlarmState will change to 'major'.
See usrVHAFailedSessionsAlarmState for TRAP generation details.ro Unsigned32 UNITS "RP Sessions" .1.3.6.1.4.1.77.1.1.84.10.3.2 |
usrVHAFailedSessionsClearAlarmThreshThe alarm clear threshold for usrVHAFailedSessionsValue
gauge.
This object must be less than
usrVHAFailedSessionsMajorAlarmThresh (if non-zero)
usrVHAFailedSessionsCricalAlarmThresh (if non-zero)..
This value is set indirectly by setting
usrVHAFailedSessionsClearAlarmThreshPct
Changing the threshold value causes the alarm state to be
re-evaluated.
IF usrVHAFailedSessionsAlarmState is not 'clear' and
the current gauge value is equal or less than this threshold,
THEN usrVHAFailedSessionsCriticalAlarmState will change to
'clear'.
See usrVHAFailedSessionsAlarmState for trap generation details.ro Unsigned32 UNITS "RP Sessions" .1.3.6.1.4.1.77.1.1.84.10.3.3 |
usrVHAFailedSessionsMajorAlarmThreshPctThe major alarm threshold for usrVHAFailedSessionsValue
gauge expressed as a percentage of
usrVHAFailedSessionsCriticalAlarmThesh.
The allowed range of this object is 0 to 100.
Writing this object causes
usrVHAFailedSessionsMajorAlarmThresh to be re-calculated.
Writing usrVHAFailedSessionsMajorAlarmThresh causes this object
to be re-calculated.
See usrVHAFailedSessionsMajorAlarmThresh for effects of
changing threshold value such as causing the alarm state to be
re-evaluated.rw Integer32 .1.3.6.1.4.1.77.1.1.84.10.3.4 |
usrVHAFailedSessionsClearAlarmThreshPctThe clear alarm threshold for usrVHAFailedSessionsValue
gauge expressed as a percentage of
usrVHAFailedSessionsCriticalAlarmThesh.
The allowed range of this object is 0 to 100.
Writing this object causes
usrVHAFailedSessionsClearAlarmThresh to be re-calculated.
Writing usrVHAFailedSessionsClearAlarmThresh causes this object
to be re-calculated.
See usrVHAFailedSessionsClearAlarmThresh for effects of
changing threshold value such as causing the alarm state to be
re-evaluated.rw Integer32 .1.3.6.1.4.1.77.1.1.84.10.3.5 |
usrVHAFailedSessionsTrapsEnabledThis object controls trap generation when
usrVHAFailedSessionsAlarmState changes.
See usrVHAFailedSessionsAlarmState for alarm details.rw Enumeration .1.3.6.1.4.1.77.1.1.84.10.3.6 |
usrVHAFailedSessionsIntervalThe interval in seconds over which the RP Failed Sessions
(RP Sessions that failed to establish)
are sampled (measured) to determine a packet throughput by
making a delta between a previous sample and a new sample.
The delta is stored in usrVHAFailedSessionsValue and
thresholds are checked.
Value of zero disables RP Failed Sessions alarms and
forces alarm state to 'clear'.rw Unsigned32 UNITS "Seconds" .1.3.6.1.4.1.77.1.1.84.10.3.7 |
usrVHAFailedSessionsAlarmStateAlarm state is maintained by PDSN by comparing
usrVHAFailedSessionsValue
with critical, major, and clear alarm thresholds.
IF alarm state changes to critical, AND
usrVHAFailedSessionsTrapsEnabled is true
THEN usrVHAFailedSessionsCriticalAlarm TRAP will be sent.
IF alarm state changes to major, AND
usrVHAFailedSessionsTrapsEnabled is true
THEN usrVHAFailedSessionsMajorAlarm TRAP will be sent.
IF alarm state changes to clear, AND
usrVHAFailedSessionsTrapsEnabled is true
THEN usrVHAFailedSessionsCriticalAlarm TRAP will be sent.
IF alarm state changes,
THEN usrVHAFailedSessionsAlarmTime is updated with
the current time regardless of usrVHAFailedSessionsTrapsEnabled
and usrVHAFailedSessionsAlarmChanges is incremented.
This allows alarm state and time information to be retrieved
by SNMP management stations that don't support SNMP traps or
when traps are intentionally disabled to reduce trap
processing load on the SNMP management station.
Writing a 'clear' value will force the alarm state to
go to 'clear'. This will count as a state change and
cause a trap if the state was 'major' or 'critical'.
This step conceptually occurs before comparing the
alarm thresholds. If major or critical thresholds are
exceeded, the appropriate state change and trap occur.
This means that writing 'clear' may cause 0, 1, or 2
alarm state changes and traps.rw Enumeration .1.3.6.1.4.1.77.1.1.84.10.3.8 |
usrVHAFailedSessionsAlarmTimeTime of last usrVHAFailedSessionsAlarmState state change.
If the state has never changed, this value will be zero.ro Time1970 .1.3.6.1.4.1.77.1.1.84.10.3.9 |
usrVHAFailedSessionsAlarmChangesCount of usrVHAFailedSessionsAlarmState changes.ro Counter32 .1.3.6.1.4.1.77.1.1.84.10.3.10 |
usrVHAFailedSessionsValueThe value of the statistic during the last measurement
interval. usrVHARegReqDenied is sampled at the start and at
the end of a measurement interval. This MIB object represents
the delta value between these two samples. The interval
MIB object is usrVHAFailedSessionsInterval.
The value of this MIB object is the value that is
compared with the 3 thresholds for alarm generation.
The value during the current measurement period is not made
available until the measurement period is completed and will
remain available until the next period completes.ro Gauge32 UNITS "RP Sessions" .1.3.6.1.4.1.77.1.1.84.10.3.11 |
usrVHAPktThroughputPM OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.10.4 |
usrVHAPktThroughputCriticalAlarmThreshThe critical alarm threshold for usrVHAPktThroughputValue
gauge.
Object value of 0 disables this alarm and threshold.
IF this object is set to a non-zero value equal or less than
the current value of usrVHAPktThroughputMajorAlarmThresh,
THEN usrVHAPktThroughputMajorAlarmThresh will be automatically
reduced to a valid value.
IF this object is set to a non-zero value equal or less than
the current value of usrVHAPktThroughputClearAlarmThresh,
THEN usrVHAPktThroughputClearAlarmThresh will be automatically
reduced to a valid value.
Agent is allowed to either reject a SET which violates
these constraints, or adjust the object value such that the
constraints hold.
Changing threshold values causes the alarm state to be
re-evaluated.
IF usrVHAPktThroughputAlarmState is not 'critical' and
the current gauge value is equal or greater than this
critical threshold, and this critical threshold is non-zero,
THEN usrVHAPktThroughputAlarmState will change to
'critical'.
See usrVHAPktThroughputAlarmState for TRAP generation details.rw Unsigned32 UNITS "RP Packets" .1.3.6.1.4.1.77.1.1.84.10.4.1 |
usrVHAPktThroughputMajorAlarmThreshThe major alarm threshold for usrVHAPktThroughputValue
gauge.
Value of 0 disables this threshold.
IF this object is set to a non-zero value equal or less than
the current value of usrVHAPktThroughputClearAlarmThresh,
THEN usrVHAPktThroughputClearAlarmThresh will be automatically
reduced to a valid value.
This value is set indirectly by setting
usrVHAPktThroughputMajorAlarmThreshPct
Changing threshold values causes the alarm state to be
re-evaluated.
IF usrVHAPktThroughputAlarmState is 'clear' and the current
gauge value is equal or greater than this threshold, and the
current gauge value is less than non-zero
usrVHAPktThroughputCriticalAlarmThresh, and the threshold is
not zero,
THEN usrVHAPktThroughputAlarmState will change to 'major'.
See usrVHAPktThroughputAlarmState for TRAP generation details.ro Unsigned32 UNITS "RP Packets" .1.3.6.1.4.1.77.1.1.84.10.4.2 |
usrVHAPktThroughputClearAlarmThreshThe alarm clear threshold for usrVHAPktThroughputValue
gauge.
This object must be less than
usrVHAPktThroughputMajorAlarmThresh (if non-zero)
usrVHAPktThroughputCricalAlarmThresh (if non-zero)..
This value is set indirectly by setting
usrVHAPktThroughputMajorAlarmThreshPct.
Changing the threshold value causes the alarm state to be
re-evaluated.
IF usrVHAPktThroughputAlarmState is not 'clear' and
the current gauge value is equal or less than this threshold,
THEN usrVHAPktThroughputCriticalAlarmState will change to
'clear'.
See usrVHAPktThroughputAlarmState for trap generation details.ro Unsigned32 UNITS "RP Packets" .1.3.6.1.4.1.77.1.1.84.10.4.3 |
usrVHAPktThroughputMajorAlarmThreshPctThe major alarm threshold for usrVHAPktThroughputValue gauge
expressed as a percentage of
usrVHAPktThroughputCriticalAlarmThesh.
The allowed range of this object is 0 to 100.
Writing this object causes usrVHAPktThroughputMajorAlarmThresh
to be re-calculated.
Writing usrVHAPktThroughputMajorAlarmThresh causes this object
to be re-calculated.
See usrVHAPktThroughputMajorAlarmThresh for effects of changing
threshold value such as causing the alarm state to be
re-evaluated.rw Integer32 .1.3.6.1.4.1.77.1.1.84.10.4.4 |
usrVHAPktThroughputClearAlarmThreshPctThe clear alarm threshold for usrVHAPktThroughputValue gauge
expressed as a percentage of
usrVHAPktThroughputCriticalAlarmThesh.
The allowed range of this object is 0 to 100.
Writing this object causes usrVHAPktThroughputClearAlarmThresh
to be re-calculated.
Writing usrVHAPktThroughputClearAlarmThresh causes this object
to be re-calculated.
See usrVHAPktThroughputClearAlarmThresh for effects of changing
threshold value such as causing the alarm state to be
re-evaluated.rw Integer32 .1.3.6.1.4.1.77.1.1.84.10.4.5 |
usrVHAPktThroughputTrapsEnabledThis object controls trap generation when
usrVHASActiveSessionsAlarmState changes.
See usrVHAPktThroughputAlarmState for alarm details.rw Enumeration .1.3.6.1.4.1.77.1.1.84.10.4.6 |
usrVHAPktThroughputIntervalThe interval in seconds over which the RP packet counters
are sampled (measured) to determine a packet throughput by
making a delta between a previous sample and a new sample.
The delta is stored in usrVHAPktThroughputValue and
thresholds are checked.
Value of zero disables RP Packet Throughput alarms and
forces alarm state to 'clear'.rw Unsigned32 UNITS "Seconds" .1.3.6.1.4.1.77.1.1.84.10.4.7 |
usrVHAPktThroughputAlarmStateAlarm state is maintained by PDSN by comparing
usrVHAPktThroughputValue
with critical, major, and clear alarm thresholds.
IF alarm state changes to critical, AND
usrVHAPktThroughputTrapsEnabled is true
THEN usrVHAPktThroughputCriticalAlarm TRAP will be sent.
IF alarm state changes to major, AND
usrVHAPktThroughputTrapsEnabled is true
THEN usrVHAPktThroughputMajorAlarm TRAP will be sent.
IF alarm state changes to clear, AND
usrVHAPktThroughputTrapsEnabled is true
THEN usrVHAPktThroughputCriticalAlarm TRAP will be sent.
IF alarm state changes,
THEN usrVHAPktThroughputAlarmTime is updated with
the current time regardless of usrVHAPktThroughputTrapsEnabled
and usrVHAPktThroughputAlarmChanges is incremented.
This allows alarm state and time information to be retrieved
by SNMP management stations that don't support SNMP traps or
when traps are intentionally disabled to reduce trap
processing load on the SNMP management station.
Writing a 'clear' value will force the alarm state to
go to 'clear'. This will count as a state change and
cause a trap if the state was 'major' or 'critical'.
This step conceptually occurs before comparing the
alarm thresholds. If major or critical thresholds are
exceeded, the appropriate state change and trap occur.
This means that writing 'clear' may cause 0, 1, or 2
alarm state changes and traps.rw Enumeration .1.3.6.1.4.1.77.1.1.84.10.4.8 |
usrVHAPktThroughputAlarmTimeTime of last usrVHAPktThroughputAlarmState state change.
If the state has never changed, this value will be zero.ro Time1970 .1.3.6.1.4.1.77.1.1.84.10.4.9 |
usrVHAPktThroughputAlarmChangesCount of usrVHAPktThroughputAlarmState changes.ro Counter32 .1.3.6.1.4.1.77.1.1.84.10.4.10 |
usrVHAPktCountsCount of RP Packets sent and received. This is the sum of
usrVHATotalCREPktsRcvd - A10 Packets received
usrVHATotalGREPktsTrans - A10 Packets sent
usrVHARegReqRcvd - A11 Packets received (1 of 3)
usrVHARegAcknowledge - A11 Packets received (2 of 3)
usrVHATotalRegUpdateDenied - A11 Packets received (3 of 3)
usrVHARegReqAccept - A11 Packets sent (1 of 3)
usrVHARegReqDenied - A11 Packets sent (2 of 3)
usrVHARegUpdate - A11 Packets sent (3 of 3)ro Counter32 UNITS "Packets" .1.3.6.1.4.1.77.1.1.84.10.4.11 |
usrVHAPktThroughputValueThe value of the statistic during the last measurement
interval. usrVHAPktCounts is sampled at the start and at
the end of a measurement interval. This MIB object represents
the delta value between these two samples. The interval
MIB object is usrVHAPktThroughputInterval.
The value of this MIB object is the value that is
compared with the 3 thresholds for alarm generation.
The value during the current measurement period is not made
available until the measurement period is completed ahd will
remain available until the next period completes.ro Gauge32 UNITS "RP Packets" .1.3.6.1.4.1.77.1.1.84.10.4.12 |
usrVHAServiceOptionStats OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.84.11 |
usrVHAServiceOptionStatsTableA table of R-P Registration request stats based on Service Option SEQUENCE OF UsrVHAServiceOptionStatsEntry .1.3.6.1.4.1.77.1.1.84.11.1 |
usrVHAServiceOptionStatsEntryAn entry in the VHA Service Option Stats Table. UsrVHAServiceOptionStatsEntry .1.3.6.1.4.1.77.1.1.84.11.1.1 |
usrVHAServiceOptionStatsTableIndexThe value of Service Option recived over A11 interface by PDSN.ro Integer32 .1.3.6.1.4.1.77.1.1.84.11.1.1.1 |
usrVHAServiceOptionRegReqRcvdTotal number of valid Registration Requests
received for the Service Option.ro Counter32 .1.3.6.1.4.1.77.1.1.84.11.1.1.2 |
usrVHAServiceOptionRegRepAcceptTotal number of Registration Replies accepted
with code information element inside the Registration
Accept message equal to zero for this service option.ro Counter32 .1.3.6.1.4.1.77.1.1.84.11.1.1.3 |
usrVHAServiceOptionDeRegReqRcvdTotal number of valid Registration Requests
received with a Lifetime of zero (requests
to deregister) for this service option.ro Counter32 .1.3.6.1.4.1.77.1.1.84.11.1.1.4 |
usrVHAServiceOptionDeRegRepAcceptTotal number of Registration Replies accepted
in response to a deregistration request with code
information element inside the Registration Accept
message equal to zero for this service option.ro Counter32 .1.3.6.1.4.1.77.1.1.84.11.1.1.5 |