UsrUserMan-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for UsrUserMan-MIB.
183
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
183 total| Object Name |
|---|
usrUserManGroup OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.2.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.77.1.1.2.1 |
usrUserManRadiusIPThe IP address of the RADIUS serverrw IpAddress .1.3.6.1.4.1.77.1.1.2.1.1 |
usrUserManRadiusAltIPThe alternate IP address of the RADIUS serverrw IpAddress .1.3.6.1.4.1.77.1.1.2.1.2 |
usrUserManRadiusAcctIPThe IP address of the RADIUS accounting serverrw IpAddress .1.3.6.1.4.1.77.1.1.2.1.3 |
usrUserManRadiusAcctAltIPThe IP address of the RADIUS alternate accounting
serverrw IpAddress .1.3.6.1.4.1.77.1.1.2.1.4 |
usrUserManLocalAuthSuccessesThe number of local authentication successesro Counter .1.3.6.1.4.1.77.1.1.2.1.5 |
usrUserManLocalAuthFailsThe number of local authentication failuresro Counter .1.3.6.1.4.1.77.1.1.2.1.6 |
usrUserManRadiusAuthSuccessesThe number of radius authentication successesro Counter .1.3.6.1.4.1.77.1.1.2.1.7 |
usrUserManRadiusAuthFailsThe number of radius authentication failuresro Counter .1.3.6.1.4.1.77.1.1.2.1.8 |
usrUserManLocalUsersThe number of local usersro Counter .1.3.6.1.4.1.77.1.1.2.1.9 |
usrUserManActiveUsersThe number of active usersro Counter .1.3.6.1.4.1.77.1.1.2.1.10 |
usrUserManRetransmissionsThe number of udp packet retransmissionsro Counter .1.3.6.1.4.1.77.1.1.2.1.11 |
usrUserManUdpReceivesThe number of udp packets receivedro Counter .1.3.6.1.4.1.77.1.1.2.1.12 |
usrUserManRadiusRetransThe maximum number of times a timeout will occur when
communicating with radiusrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.13 |
usrUserManRadiusTimeoutThe maximum amount of time in seconds we will wait
for a RADIUS response before retransmittingrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.14 |
usrUserManAcctRetransThe maximum number of times a timeout will occur when
communicating with radius accounting serverrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.15 |
usrUserManAcctTimeoutThe maximum amount of time in seconds we will wait
for a RADIUS accounting response before retransmittingrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.16 |
usrUserManLocalAuthIs local authentication on or offrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.17 |
usrUserManAcctIs accounting on or offrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.18 |
usrUserManAcctServersDo we want to consider both servers specified as primaryrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.19 |
usrUserManRadiusAuthIs radius authentication on or offrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.20 |
usrUserManStartAccountTimeWhen do we want to account fromrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.21 |
usrUserManSnmpAccessDo we allow snmp to set our user tablerw Enumeration .1.3.6.1.4.1.77.1.1.2.1.22 |
usrUserManSaveUsersIf we hit the save flag the users will be saved to flash Enumeration .1.3.6.1.4.1.77.1.1.2.1.23 |
usrUserManRadiusSecretThe shared secret between the RADIUS server and pilgrimrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.24 |
usrUserManTable SEQUENCE OF UumEntry .1.3.6.1.4.1.77.1.1.2.1.25 |
uumEntry UumEntry .1.3.6.1.4.1.77.1.1.2.1.25.1 |
uumUserNameThe users name UsrUserName .1.3.6.1.4.1.77.1.1.2.1.25.1.1 |
uumStatusThe status field for deleterw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.2 |
uumUserPasswordThe users passwordrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.3 |
uumServiceTypeThe bitmap indicating one or more types of user:
login 0x1, framed 0x2, callback 0x4, dial-out 0x8,
administrative 0x10rw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.4 |
uumFramedProtocolThe framed users protocolrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.5 |
uumFramedIpAddressThe IP destination for the framed userrw IpAddress .1.3.6.1.4.1.77.1.1.2.1.25.1.6 |
uumFramedIpNetmaskThe destinations netmaskrw IpAddress .1.3.6.1.4.1.77.1.1.2.1.25.1.7 |
uumFramedRoutingThe routing defined for a framed userrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.8 |
uumFilterIdInputThe input or output filter defined for the userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.9 |
uumFramedMtuThe framed maximum transmission unitrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.10 |
uumFramedCompressionThe compression being used for the framed userrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.11 |
uumLoginIpHostThe IP destination for the login userrw IpAddress .1.3.6.1.4.1.77.1.1.2.1.25.1.12 |
uumLoginServiceThe login user's protocolrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.13 |
uumLoginPortThe tcp port the user will userw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.14 |
uumReplyMessageThe message to be displayed to the userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.15 |
uumCallbackNumberOneThe first phone number configured for this userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.16 |
uumExpirationThe users expiration daterw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.17 |
uumFramedRouteThe framed route for the userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.18 |
uumFramedIpxNetworkThe ipx network defined for the userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.19 |
uumSessionTimeoutThe amount of time in seconds before time outrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.20 |
uumIdleTimeoutThe amount of idle time in seconds before time outrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.21 |
uumBearerCapabilitiesThe type of transmission Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.22 |
uumSpeedOfConnectionThe speed of the connectionrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.23 |
uumMaxChannelsThe maximum number of channels that may be usedrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.24 |
uumChannelExpansionThe percentage for channel expansionrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.25 |
uumChannelDecrementThe percentage for channel decrementrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.26 |
uumExpansionAlgorithmThe expansion algorithm being usedrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.27 |
uumCompressionAlgorithmThe compression algorithm to be usedrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.28 |
uumReceiveAccMapThe receive acc mappingrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.29 |
uumTransmitAccMapThe transmit acc mappingrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.30 |
uumWhereCompressionThe area where compression should be done Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.31 |
uumCompressionResetModeThe mode that the compression should be reset inrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.32 |
uumMinCompressionSizeThe minimum size for compressionrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.33 |
uumLocationTypeThe type of location userrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.34 |
uumIpIp enabled or disabledrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.35 |
uumIpxIpx enabled or disabledrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.36 |
uumFilterZonesArap needed to define filter zonesrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.37 |
uumFilterIdOutputThe output filter defined for the userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.38 |
uumAppletalkAppletalk enabled or disabledrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.39 |
uumBridgingBridging enabled or disabledrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.40 |
uumSpoofingIpx spoofing enabled or disabledrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.41 |
uumHostTypeThe means for specifying a host for this user Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.42 |
uumSendNameName we use when challenged for authenticationrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.43 |
uumSendPasswordPassword we use when challenged for authenticationrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.44 |
uumStartTimeDaily time we start timed locationrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.45 |
uumEndTimeDaily time we stop timed locationrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.46 |
uumSendScript1The first send script for this dial-out userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.47 |
uumReplyScript1The first reply script for this dial-out userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.48 |
uumSendScript2The second send script for this dial-out userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.49 |
uumReplyScript2The second reply script for this dial-out userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.50 |
uumSendScript3The third send script for this dial-out userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.51 |
uumReplyScript3The third reply script for this dial-out userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.52 |
uumSendScript4The fourth send script for this dial-out userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.53 |
uumReplyScript4The fourth reply script for this dial-out userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.54 |
uumSendScript5The fifth send script for this dial-out userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.55 |
uumReplyScript5The fifth reply script for this dial-out userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.56 |
uumSendScript6The sixth send script for this dial-out userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.57 |
uumReplyScript6The sixth reply script for this dial-out userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.58 |
uumTerminalTypeThe terminal type for the userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.59 |
uumAppletalkNetworkRangeThe appletalk network range for the userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.60 |
uumLocalIpAddressThe local ip address configured for a dial-out userrw IpAddress .1.3.6.1.4.1.77.1.1.2.1.25.1.61 |
uumRoutingProtocolThe routing protocol configured for a userrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.62 |
uumCallbackNumberTwoThe first phone number configured for this userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.63 |
uumModemGroupThe modem group string for the userrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.64 |
uumIpxRoutingThe ipx routing defined for a framed userrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.65 |
uumIpxWanIs ipx wan enabled or disabled for the userrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.66 |
uumIpRipSendDefaultIP RIP flagrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.67 |
uumIpRipSendRoutesIP RIP flagrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.68 |
uumIpRipSendSubnetsIP RIP flagrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.69 |
uumIpRipAcceptDefaultIP RIP flagrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.70 |
uumIpRipSplitHorizonIP RIP flagrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.71 |
uumIpRipPoisonReverseIP RIP flagrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.72 |
uumIpRipFlashUpdateIP RIP flagrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.73 |
uumIpRipSimpleAuthIP RIP flagro Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.74 |
uumIpRipV1SendIP RIP flagrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.75 |
uumIpRipV1ReceiveIP RIP flagrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.76 |
uumIpRipV2ReceiveIP RIP flagrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.77 |
uumIpRipSilentIP RIP flagrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.78 |
uumSimpleAuthPasswordThe IP RIP simple authentication passwordrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.25.1.79 |
uumIpDefaultRouteOptionIf enable (1) a default route will be created using
the remote users IP address. If disable (2) no such
route is created.rw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.80 |
uumIpPatOptionNetwork Address Translation (NAT) option field. When NAT is enabled,
the local LAN addresses are replaced with public recoginzed addresses
when the frame traverses a WAN interface. A mapping between the public and
private addresses is maintained while a connection/session remains active.
Once the connection goes inactive or idle, the mapping is relinquished and
the public address or port can be reused. Two types of NAT are supported,
Port Address Translation (PAT) and the standard NAT (RFC 1631). With PAT,
the mapping is maintained by the TCP and UDP port number. The private
address is replaced with the public WAN interface address and the port number
is replaced with a dynamically assigned public port number. With the standard
NAT (RFC 1631), the private address is replaced with dynamically allocated
public addresses taken from a configured address pool. Both PAT and NAT can
be configured with static assignments.rw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.81 |
uumATMCategoryOfServiceThe ATM category of servicerw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.82 |
uumATMVpiThe ATM Virtual Path Idrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.83 |
uumATMVciThe ATM Virtual Channel Idrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.84 |
uumATMPeakCellRateThe ATM Peak Cell Raterw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.85 |
uumATMSustainableCellRateThe ATM Sustainable Cell Raterw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.86 |
uumATMBurstToleranceThe ATM Burst Tolerancerw INTEGER .1.3.6.1.4.1.77.1.1.2.1.25.1.87 |
uumPatDefaultPrivAddrWhen the NatOption is configured for PAT and a frame
is received from the Public Net on a port which does not
have a private address mapping, the frame will be
mapped to the PatDefaultPrivAddr if it is configured. If
the PatDefaultPrivAddr is not configured, 0.0.0.0, the
frame will be discarded.rw IpAddress .1.3.6.1.4.1.77.1.1.2.1.25.1.88 |
uumIpSrcValidationOptionIf enabled, the source address on incoming frames will be
validated. If a route does not exist for the source
address on the same interface on which the packet was
received, the frame will be silently discarded. The default
for this option is disabled.rw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.89 |
uumUserDesignationThe users designated type.rw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.90 |
uumATMVcTypeThe type of vc (permanent or switched).rw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.91 |
uumOwnershipTo identify the VC created by auto provisionsing process or some other processesrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.92 |
uumMacEncapsulatedRoutingTo identify that routed frames will be transmitted out the WAN ports
prepended with a MAC header.rw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.93 |
uumIpIntelligentNatOnly applicable when uumIpPatOption is set to pat. When enabled and processing
an incoming frame without an existing translation mapping, the client with the
last access to the remote host will be chosen. If not found, the
uumPatDefaultPrivAddr will be used.rw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.94 |
uumIpDynamicAddrProtoProtocol used to dynamically learn the IP configuration when the network service is
NOT PPP. Current options are DHCP and Inverse ARP.rw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.95 |
uumMgmtIpAddressManagement IP address. When configured, this address can be used to access the device
and will be used as the source address by internal services.rw IpAddress .1.3.6.1.4.1.77.1.1.2.1.25.1.96 |
uumMgmtIpNetmaskThe netmask of the Management Network, associated with the uumMgmtIpAddressrw IpAddress .1.3.6.1.4.1.77.1.1.2.1.25.1.97 |
uumInternalCallToProtoInternal field used to specify which Protocol Handler CIP should call for
this profile. VATM is the default.rw Enumeration .1.3.6.1.4.1.77.1.1.2.1.25.1.98 |
usrUserManCfmFileNameThe name of the configuration filero DisplayString .1.3.6.1.4.1.77.1.1.2.1.26 |
usrUserManCfmSaveFlagThe Configuration File Manager Flag for saving user management scalarsrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.27 |
usrUserManRadiusPortThe udp port the primary radius server listens atrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.28 |
usrUserManRadiusAltPortThe udp port the alternate radius server listens atrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.29 |
usrUserManRadiusAltSecretThe shared secret between the alternate RADIUS server and pilgrimrw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.30 |
usrUserManFramedRouteTable SEQUENCE OF UumFramedRouteEntry .1.3.6.1.4.1.77.1.1.2.1.31 |
uumFramedRouteEntry UumFramedRouteEntry .1.3.6.1.4.1.77.1.1.2.1.31.1 |
uumFramedRouteUserNameThe users name UsrUserName .1.3.6.1.4.1.77.1.1.2.1.31.1.1 |
uumFramedRouteIpAddressThe framed routing ip address for the user IpAddress .1.3.6.1.4.1.77.1.1.2.1.31.1.2 |
uumFramedRouteStatusThe status field for the framed routerw Enumeration .1.3.6.1.4.1.77.1.1.2.1.31.1.3 |
uumFramedRouteIpMaskThe framed routing ip mask for the userrw IpAddress .1.3.6.1.4.1.77.1.1.2.1.31.1.4 |
uumFramedRouteIpGatewayThe framed routing ip gateway for the userrw IpAddress .1.3.6.1.4.1.77.1.1.2.1.31.1.5 |
uumFramedRouteIpMetricThe framed routing ip metric for the userrw INTEGER .1.3.6.1.4.1.77.1.1.2.1.31.1.6 |
usrUserManPatUdpTableStatic entries that map a UDP port number to a local/private IP
address/port. Each entry defines a service and the corresponding
private Server. SEQUENCE OF UumPatUdpPortEntry .1.3.6.1.4.1.77.1.1.2.1.32 |
uumPatUdpPortEntryA static entry that map a UDP port number to a local/private IP
address/port. Defines a service and the corresponding
private Server. UumPatUdpPortEntry .1.3.6.1.4.1.77.1.1.2.1.32.1 |
uumPatUdpPortNameThe users name UsrUserName .1.3.6.1.4.1.77.1.1.2.1.32.1.1 |
uumPatUdpStatusThe status field for the UDP Port Entryrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.32.1.2 |
uumPatUdpPublicPortPublic Port corresponding to a Private Address/Port.rw INTEGER .1.3.6.1.4.1.77.1.1.2.1.32.1.3 |
uumPatUdpPrivAddrPrivate Address corresponding to a Public Port number.rw IpAddress .1.3.6.1.4.1.77.1.1.2.1.32.1.4 |
uumPatUdpPrivPortPrivate Port corresponding to a Public Port number.rw INTEGER .1.3.6.1.4.1.77.1.1.2.1.32.1.5 |
usrUserManPatTcpTableStatic entries that map a TCP port number to a local/private IP
address/port. Each entry defines a service and the corresponding
private Server. SEQUENCE OF UumPatTcpPortEntry .1.3.6.1.4.1.77.1.1.2.1.33 |
uumPatTcpPortEntryA static entry that map a TCP port number to a local/private IP
address/port. Defines a service and the corresponding
private Server. UumPatTcpPortEntry .1.3.6.1.4.1.77.1.1.2.1.33.1 |
uumPatTcpPortNameThe users name UsrUserName .1.3.6.1.4.1.77.1.1.2.1.33.1.1 |
uumPatTcpStatusThe status field for the TCP Port Entryrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.33.1.2 |
uumPatTcpPublicPortPublic TCP Port corresponding to a Private Address/Port.rw INTEGER .1.3.6.1.4.1.77.1.1.2.1.33.1.3 |
uumPatTcpPrivAddrPrivate Address corresponding to a Public Port number.rw IpAddress .1.3.6.1.4.1.77.1.1.2.1.33.1.4 |
uumPatTcpPrivPortPrivate Port corresponding to a Public Port number.rw INTEGER .1.3.6.1.4.1.77.1.1.2.1.33.1.5 |
uumNatStatAddrTableThe static IP addresses map a Public IP address to a local/
non-public address. No port translation is done for static
defined addresses. SEQUENCE OF UumNatStatAddrEntry .1.3.6.1.4.1.77.1.1.2.1.34 |
uumNatStatAddrEntryThe static IP addresses map a Public IP address to a local/
non-public address. No port translation is done for static
defined addresses. UumNatStatAddrEntry .1.3.6.1.4.1.77.1.1.2.1.34.1 |
uumNatStatAddrNameThe name of a NAT translation entry. When NAT is enabled for
a user profile, the profile will contain a name which matches
the NAT translation entry name.rw UsrUserName .1.3.6.1.4.1.77.1.1.2.1.34.1.1 |
uumNatStatStatusThe status field for the NAT Static Entryrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.34.1.2 |
uumNatStatPublicAddrPublic Address corresponding to a Private Address.rw IpAddress .1.3.6.1.4.1.77.1.1.2.1.34.1.3 |
uumNatStatPrivAddrPrivate Address corresponding to a Public Address.rw IpAddress .1.3.6.1.4.1.77.1.1.2.1.34.1.4 |
uumNatDynAddrTableA table of public address pools. A public address is allocated
from the pool when a frame traverses a WAN interface with NAT
enabled. The public address remains mapped to the private address
while there are TCP and UDP connections/conversations that are
active. SEQUENCE OF UumNatDynAddrEntry .1.3.6.1.4.1.77.1.1.2.1.35 |
uumNatDynAddrEntryAn entry for a public address pool. A public address is allocated
from the pool when a frame traverses a WAN interface with NAT
enabled. The public address remains mapped to the private address
while there are TCP and UDP connections/conversations that are
active. The pool is specified with a start address and the number of
addresses in the pool UumNatDynAddrEntry .1.3.6.1.4.1.77.1.1.2.1.35.1 |
uumNatDynAddrNameThe name of a NAT translation entry. When NAT is enabled for
a user profile, the profile will contain a name which matches
the NAT translation entry name.rw UsrUserName .1.3.6.1.4.1.77.1.1.2.1.35.1.1 |
uumNatDynStatusThe status field for the NAT Dynamic Entryrw Enumeration .1.3.6.1.4.1.77.1.1.2.1.35.1.2 |
uumNatDynPoolAddrNAT Dynamic Pool start address.rw IpAddress .1.3.6.1.4.1.77.1.1.2.1.35.1.3 |
uumNatDynPoolCountThe number of addresses in the NAT Dynamic pool.rw INTEGER .1.3.6.1.4.1.77.1.1.2.1.35.1.4 |
uumNatDynPoolMaskNAT Dynamic Pool ip mask. Defaults to the IP address class
(e.g. Class C). This mask is used in the Routing Messages (RIP)
to advertise routes for the specified Pool.rw IpAddress .1.3.6.1.4.1.77.1.1.2.1.35.1.5 |
usrUserManIPXRouteTable SEQUENCE OF UumIPXRouteEntry .1.3.6.1.4.1.77.1.1.2.1.36 |
uumIPXRouteEntry UumIPXRouteEntry .1.3.6.1.4.1.77.1.1.2.1.36.1 |
uumIPXRouteUserNameThe users name UsrUserName .1.3.6.1.4.1.77.1.1.2.1.36.1.1 |
uumIPXRouteAddressThe framed routing entry's destination ipx address. OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.36.1.2 |
uumIPXRouteStatusThe status field for the framed routerw Enumeration .1.3.6.1.4.1.77.1.1.2.1.36.1.3 |
uumIPXRouteMetricThe number of router hops necessary to reach the destination.rw INTEGER .1.3.6.1.4.1.77.1.1.2.1.36.1.4 |
uumIPXRouteTicksThe delay, in ticks, to reach the route's destination.rw INTEGER .1.3.6.1.4.1.77.1.1.2.1.36.1.5 |
usrUserManIPXServTable SEQUENCE OF UumIpxServEntry .1.3.6.1.4.1.77.1.1.2.1.37 |
uumIpxServEntry UumIpxServEntry .1.3.6.1.4.1.77.1.1.2.1.37.1 |
uumIpxServUserNameThe users name UsrUserName .1.3.6.1.4.1.77.1.1.2.1.37.1.1 |
uumIpxServNameThe service name.rw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.37.1.2 |
uumIpxServTypeThe service type(e.g. FileServer = 4).rw INTEGER .1.3.6.1.4.1.77.1.1.2.1.37.1.3 |
uumIpxServStatusThe status field for the framed routerw Enumeration .1.3.6.1.4.1.77.1.1.2.1.37.1.4 |
uumIpxServNetNumThe IPX network number portion of the IPX address of the
service.rw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.37.1.5 |
uumIpxServNodeThe node portion of the IPX address of the service.rw OCTET STRING .1.3.6.1.4.1.77.1.1.2.1.37.1.6 |
uumIpxServSocketThe socket portion of the IPX address of the service.rw INTEGER .1.3.6.1.4.1.77.1.1.2.1.37.1.7 |
uumIpxServHopCountThe number of router hops to the server on which the service resides.rw INTEGER .1.3.6.1.4.1.77.1.1.2.1.37.1.8 |