USR-MIP-MIB
AI MIB Summary
The USR-MIP-MIB module manages User-Mode IP (MIP) tunneling configurations on US Robotics hardware, specifically exposing the `usrMipHaSendICMPforPMTUDiscovery` parameter to control Path MTU Discovery behavior for High Availability IPsec tunnels. This metric allows administrators to enable or disable the generation of ICMP "Fragmentation Needed" messages, ensuring proper packet sizing and tunnel stability across heterogeneous network paths.
Added usrMipHaSendICMPforPMTUDiscovery
Main OID:
usrMIP.1.3.6.1.4.1.77.1.1.82
144
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
144 total| Object Name |
|---|
usrMIPAdded usrMipHaSendICMPforPMTUDiscovery MODULE-IDENTITY .1.3.6.1.4.1.77.1.1.82 |
IMPORTSAdded usrMipHaSendICMPforPMTUDiscovery Unknown .1.3.6.1.4.1.77.1.1.82 |
SNMPv2-TCAdded usrMipHaSendICMPforPMTUDiscovery NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.82 |
usrMipHaConfig OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.82.1 |
usrMipHaMaxLifetimeThe longest lifetime in seconds that the Home
Agent is willing to accept in any Registration
Request.rw Integer32 .1.3.6.1.4.1.77.1.1.82.1.1 |
usrMipHaDomainNameThe HA domain name.
OBSOLETE:
This object is never used on HA.rwobsolete OCTET STRING .1.3.6.1.4.1.77.1.1.82.1.2 |
usrMipHaDomainSpiThe SPI is the 4-byte opaque index within
the Mobility Security Association which
selects the specific security parameters
to be used to authenticate the peer.
OBSOLETE:
This object is never used on HA.rwobsolete Unsigned32 .1.3.6.1.4.1.77.1.1.82.1.3 |
usrMipHaDomainKeyThe shared secret key for the security associations.
Reading this object will always return zero length
value.
OBSOLETE:
This object is never used on HA.rwobsolete OCTET STRING .1.3.6.1.4.1.77.1.1.82.1.4 |
usrMipHaHacnAddressHome Agent Control Node's RUN IP Address.rw IpAddress .1.3.6.1.4.1.77.1.1.82.1.5 |
usrMipFaDomainSpiThe SPI is the 4-byte opaque index within
the Mobility Security Association which
selects the specific security parameters
to be used to authenticate the peer.
OBSOLETE:
This object is never used on HA.rwobsolete Unsigned32 .1.3.6.1.4.1.77.1.1.82.1.6 |
usrMipFaDomainKeyThe shared secret key for the security associations.
Reading this object will always return zero length
value.
OBSOLETE:
This object is never used on HA.rwobsolete OCTET STRING .1.3.6.1.4.1.77.1.1.82.1.7 |
usrMipHaTimeDriftThe value represents how close the timestamp,
contained in the Identification information element
of the Registration Request or the Registration
Acknowledge message, should be to the PDSN's time
of day clock. This time tolerance is used in
conjunction with timestamp replay protection
against replay attacks.rw INTEGER .1.3.6.1.4.1.77.1.1.82.1.8 |
usrMipHaMaxTunnelsMaximum number of tunnels that can be established
by this Home Agent.rw INTEGER .1.3.6.1.4.1.77.1.1.82.1.9 |
usrMipHaHacnStatusSpecifies if the HACN Interface is available.
When set for the first time all active HA tunnels will
be deleted prior to initialization. Enabling an already
active interface has no action and returns no error.
Disabling an active interface will cause deleteion of
all tunnels and services provided on the interface.
Disabling an inactive interface has no action and
returns no error.rw Enumeration .1.3.6.1.4.1.77.1.1.82.1.10 |
usrMipHaMobileRegDumpSpecifies if the MIP debugging is enabled.
DEPRECATED:
The CLI command Set Mobile Reg_dump on/off removed.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.82.1.11 |
usrMipHaMnSaTableA table for configuring mobility security
associations between mobile nodes and the
Home Agent. SEQUENCE OF UsrMipHaMnSaEntry .1.3.6.1.4.1.77.1.1.82.1.12 |
usrMipHaMnSaEntryIndexAn entry in the Home Agent Security Association
Table. UsrMipHaMnSaEntry .1.3.6.1.4.1.77.1.1.82.1.12.1 |
usrMipHaMnSaIndexNumHome Agent can support up to 1000 mobility
security associations.ro INTEGER .1.3.6.1.4.1.77.1.1.82.1.12.1.1 |
usrMipHaMnSaIndexSpiThe SPI is the 4-byte opaque index within
the Mobility Security Association which
selects the specific security parameters
to be used to authenticate the peer.rw Unsigned32 .1.3.6.1.4.1.77.1.1.82.1.12.1.2 |
usrMipHaMnSaIndexKeyThe shared secret key for the security associations.rw UsrSecretDisplay .1.3.6.1.4.1.77.1.1.82.1.12.1.3 |
usrMipHaMnSaIndexStatusThis object is used to add, modify, and delete
rows for the security association table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.82.1.12.1.4 |
usrMipHaTunIPToDelDelete a tunnel specified by this IP address.rw IpAddress .1.3.6.1.4.1.77.1.1.82.1.13 |
usrMipHaTunnelDeleteAllWhen this flag is FALSE it indicates that HACN should not be
updated with a delete MBR. This case will happen if the HACN
interface is disabled on HA and re-enabled before HACN can
find out that it happened. If this happens then at least HACN
can download MBRs to the this HA. If this flag is set to TRUE
all MBR's are deleted from HA. This flag will always return
FALSE on a read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.82.1.14 |
usrMipHaHacnSoftbusyHA is softbusy or not.
From 3.0 onwards it means that this HA will try to forward the
Registration Request received by it and in case it can not find
a HA to which Registration Request can be forwarded, this HA
will process that request.
Softbusy state can be changed only for ACTIVE non IPSec HA.rw Enumeration .1.3.6.1.4.1.77.1.1.82.1.15 |
usrMipHaHacnSecretSecret shared between HA and HACN.rw UsrSecretDisplay .1.3.6.1.4.1.77.1.1.82.1.16 |
usrMipHaIdleTimerThe value represents the time interval when a process
will be run to delete the MBRs for the MNs on which
there have been no activity for certain time (which
is equal to maximum idle time). This value should be
less than MaxIdleTime. The default is 10 secs.rw Unsigned32 .1.3.6.1.4.1.77.1.1.82.1.17 |
usrMipHaIdleTimerStatusIdle Timer Enabled or Disabled. The default is Disabled.
Attempting to enable/disable the Idle TImer while any
call is active will return an error.rw Enumeration .1.3.6.1.4.1.77.1.1.82.1.18 |
usrMipHaMaxIdleTimeThe value represents the time for the maximum idle
time. If for this much time there is no activity
(data transfer), then the MBR for this MN will be
deleted. This value should be greater than
IdleTimer. The default value is 65535 secs.rw Unsigned32 .1.3.6.1.4.1.77.1.1.82.1.19 |
usrMipHaWAPCCStatusSpecifies if WAP Call Clearing is enabled.
Enabling if already enabled has no action and no
error is returned. Disabling this feature while
any update message is pending will return an error.rw Enumeration .1.3.6.1.4.1.77.1.1.82.1.20 |
usrMipHaTunnelByAddrDisplay a tunnel specified by this IP address.
OBSOLETE:
This object is never used on HA.rwobsolete IpAddress .1.3.6.1.4.1.77.1.1.82.1.21 |
usrMipHaStatsResetTimeReading:
Time the HA statistics counters were last
reset. The HA statistics are valid from
usrMipHAStatsResetTime until present.
Resetting counters causes a discontinuity in
the monotonically increasing value of counters.
Management stations that sample these counters
need also to sample this object so that they
can know that a discontinuity occurred with
respect to the previous sample.
Its value is in NTP format.
Writing:
Writing 0 causes update of usrMipHAStatsResetTime
and the HA counters to be reset to 0.rw Unsigned32 .1.3.6.1.4.1.77.1.1.82.1.22 |
usrMipHaUsingBothPortsSpecifies if HA is using both ports. Port 1 (eth:1) will
always be used for interfacing with PDSN/FA/HACNrw Enumeration .1.3.6.1.4.1.77.1.1.82.1.23 |
usrMipHaTunDelByNAIDelete tunnel(s) specified by this NAI. Reading this
value returns NULL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.82.1.24 |
usrMipHaBroadcastBitThis flag specifies if HA should accept a registration
request with B bit set in registration flags or not. By
default this bit is set and HA will accept reg req with
B bit set.rw Enumeration .1.3.6.1.4.1.77.1.1.82.1.25 |
usrMipHaNAICheckSpecifies if HA is checking NAI for re-registration requests
or not. If it is enable then NAI is checked for each
Re-Registration Requests otherwise NAI is not checked. By
default NAI check is enabled.rw Enumeration .1.3.6.1.4.1.77.1.1.82.1.26 |
usrMipHaFaSaTableA table for configuring FA security
associations between PDSN/FA and the
Home Agent. SEQUENCE OF UsrMipHaFaSaEntry .1.3.6.1.4.1.77.1.1.82.1.27 |
usrMipHaFaSaEntryIndexAn entry in the FA-HA Security Association
Table. UsrMipHaFaSaEntry .1.3.6.1.4.1.77.1.1.82.1.27.1 |
usrMipHaFaSaIndexNumHome Agent can support up to 100 FA-HA
security associations.ro INTEGER .1.3.6.1.4.1.77.1.1.82.1.27.1.1 |
usrMipHaFaSaIpAddressThe IP address of PDSN/FA.rw IpAddress .1.3.6.1.4.1.77.1.1.82.1.27.1.2 |
usrMipHaFaSaSpiThe SPI is the 4-byte opaque index within
the FA-HA Security Association which
selects the specific security parameters
to be used to authenticate the peer.rw Unsigned32 .1.3.6.1.4.1.77.1.1.82.1.27.1.3 |
usrMipHaFaSaKeyThe shared secret key for the security associations.rw UsrSecretDisplay .1.3.6.1.4.1.77.1.1.82.1.27.1.4 |
usrMipHaFaSaStatusThis object is used to add, modify, and delete
rows for the security association table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.82.1.27.1.5 |
usrMipHaStatusIPSecIndicates this HA is IPSec enabled or not. If enabled
then this HA will be used to service IPSec calls.
In case HACN is present, this HA will accept only ipsec
enabled virtual HA profile during role assignment.rw Enumeration .1.3.6.1.4.1.77.1.1.82.1.28 |
usrMipAuthenticationStyleIndicates the authentication style on HA for registration requests.
The HA can authenticate request according to RFC2002 standards or
RFC2002bis standards.
RFC2002 and RFC2002BIS are the only two valid values
Value 1 will specify RFC2002 Auth Style and
value 2 will specify RFC2002BIS Auth Style.rw Enumeration .1.3.6.1.4.1.77.1.1.82.1.29 |
usrMipMNHAKeyTransportSchemeIndicates the MN_HA Key Transport Scheme for access request to AAA.
The radius attribute returned by AAA for MN-HA secret will depend upon
the Key Transport Scheme.
ThreeCom-VSA and IS-835 are the only two valid values
Value 1 will specify 3Com VSA and
value 2 will specify IS-835.rw Enumeration .1.3.6.1.4.1.77.1.1.82.1.30 |
usrMipMNHAKeyPaddingIndicates whether HA has MN-HA Key padding enabled or disabled.
If enabled, the key will be padded and if disabled the exact
length of the key will be taken.
Padding can be set only if there are no calls up in the system.
By default the Key will be padded.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.82.1.31 |
usrMipLoadBalancingStatusIndicates whether HA will forward MIP Registration Requests to
other HAs for Load Balancing or not. If enabled HA will do load
balancing else it will not forward MIP RRQ.
By default the HA will do Load Balancing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.82.1.32 |
usrMipHaGarpUponReregIndicates whether G-ARP upon MIP Re-Registration is enabled or disabled.
If enabled, the HA will send G-ARP for the MN address for
Re-Registration request else it will not be sent. G-ARP is always sent
for Initial Registration request.rw Enumeration .1.3.6.1.4.1.77.1.1.82.1.33 |
usrMipHaSendICMPforPMTUDiscoveryIndicates whether HA will send ICMP message when it receives a packet
with size bigger than Tunnel MTU size for Path MTU Discovery.
Note: The CLI description was later changed to 'Check Tunnel MTU'.
CEM should also change the description to the same.rw Enumeration .1.3.6.1.4.1.77.1.1.82.1.34 |
usrMipMultipleLoginsStatusIndicates whether HA will allow Multiple Logins for same user or not.rw Enumeration .1.3.6.1.4.1.77.1.1.82.1.44 |
usrMipHaStats OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.82.2 |
usrMipHaRegReqsInTotal number of Registration Requests processed
by the home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.1 |
usrMipHaRegAccptsSentTotal number of Registrations Requests accepted
by the home agent (Code 0).ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.2 |
usrMipHaRegRejsSentTotal number Registration Requests denied by the
home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.3 |
usrMipHaRegReqsDroppedTotal number of Registration Requests that were
discarded by the home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.4 |
usrMipHaMnAuthFailuresTotal number of Registration Requests denied by
the home agent - mobile node failed authentication
(Code 131).ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.5 |
usrMipHaFaAuthFailuresTotal number of Registration Requests denied by
the home agent - foreign agent failed
authentication (Code 132).ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.6 |
usrMipHaRegsMalformedInTotal number of Registration Requests denied by
the home agent - poorly formed request (Code 134.)ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.7 |
usrMipHaRegReqsBadHaInTotal number of Registration Requests denied by
the home agent - unknown home agent address
(Code 136.)ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.8 |
usrMipHaTimeCheckFailuresTotal number of Time Check Failures.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.9 |
usrMipHaNAICheckFailuresTotal number of NAI Check Failures.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.10 |
usrMipHaInsuffResourcesTotal number of Registration Requests denied by
the home agent - insufficient resources
(Code 130.)ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.11 |
usrMipHaLifetimeDiscsTotal number of home agent initiated disconnects
due to Lifetime expiry event.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.12 |
usrMipHaDeregDiscsTotal number of Registration Requests received
by the home agent with a Lifetime of zero
(requests to deregister).ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.13 |
usrMipHaManualDiscsTotal number of manual disconnects initiated
by this home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.14 |
usrMipHaTotalSessionsTotal number of sessions handled by this home
agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.15 |
usrMipHaCurrentSessionsCurrent number of active sessions.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.16 |
usrMipHaUnsupEncapFailuresTotal number of Registration Requests denied by
the home agent - Unsupported Encapsulation (Code 139.)
DEPRECATED:
HA does not report this error code any more.
If HA receives M Bit in registration request, it gives 129 error
code.rodeprecated Counter32 .1.3.6.1.4.1.77.1.1.82.2.17 |
usrMipHaMobilityBindingTableA table containing the home agent's mobility
binding list. The home agent updates this
table in response to registration events from
mobile nodes. SEQUENCE OF UsrMipHaMobilityBindingEntry .1.3.6.1.4.1.77.1.1.82.2.18 |
usrMipHaMobilityBindingEntryAn entry in the mobility binding list. UsrMipHaMobilityBindingEntry .1.3.6.1.4.1.77.1.1.82.2.18.1 |
usrMipHaMobilityBindingIndexIndex of the entry in the Mobility Binding Table.ro INTEGER .1.3.6.1.4.1.77.1.1.82.2.18.1.1 |
usrMipHaMobilityBindingMNMobile node's home (IP) address.ro IpAddress .1.3.6.1.4.1.77.1.1.82.2.18.1.2 |
usrMipHaMobilityBindingCOAMobile node's care-of-address. One mobile node
can have multiple bindings with different
care-of-addresses.ro IpAddress .1.3.6.1.4.1.77.1.1.82.2.18.1.3 |
usrMipHaMobilityBindingRegFlagsRegistration flags sent by mobile node.
This is a bit-mapped value with the following
representation:
7 6 5 4 3 2 1 0
+-+-+-+-+
| S | B | D | M | G | V | T | R |
+-+-+-+-+
where,
S - Simultaneous Bindings
B - Broadcast Datagrams
D - Decapsulation by mobile node
M - Minimal Encapsulation
G - GRE Encapsulation
V - V.J. Compression
T - Reverse Tunneling
R - Reserved Bitro INTEGER .1.3.6.1.4.1.77.1.1.82.2.18.1.4 |
usrMipHaMobilityBindingRegIDLowLow 32 bits of Identification used in that
binding by the mobile node.ro UsrSpecialU32 .1.3.6.1.4.1.77.1.1.82.2.18.1.5 |
usrMipHaMobilityBindingRegIDHighHigh 32 bits of Identification used in that
binding by the mobile node.ro UsrSpecialU32 .1.3.6.1.4.1.77.1.1.82.2.18.1.6 |
usrMipHaMobilityBindingTimeGrantedThe lifetime in seconds granted to the mobile
node for this registration.ro Integer32 UNITS "seconds" .1.3.6.1.4.1.77.1.1.82.2.18.1.7 |
usrMipHaMobilityBindingTimeRemainingThe number of seconds remaining until the
registration is expired. It has the same initial
value as usrMipHaMobilityBindingTimeGranted,
and is counted down by the home agent.ro Gauge32 UNITS "seconds" .1.3.6.1.4.1.77.1.1.82.2.18.1.8 |
usrMipHaMobilityBindingMtuThe size of the MTU.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.2.18.1.9 |
usrMipHaMobilityBindingNAIUser name ( NAI ).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.82.2.18.1.10 |
usrMipHaMobilitySetupTimeActual time when the tunnel was setup on this HA. Time is in NTP
format.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.2.18.1.11 |
usrMipHaMobilityBindingNextHopNext hop gateway address returned by AAA, used for VLAN tagging
feature.ro IpAddress .1.3.6.1.4.1.77.1.1.82.2.18.1.14 |
usrMipHaTotalSessionReleasedTotal number of Registration Requests denied by
the home agent - Unsupported Encapsulation (Code 139.)ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.19 |
usrMipHaNewRegReqRcvdTotal number of new Registration Requests received by
the home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.20 |
usrMipHaNewRegReqAcceptedTotal number of new Registration Requests accepted by
the home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.21 |
usrMipHaNewRegReqRejectedTotal number of new Registration Requests rejected by
the home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.22 |
usrMipHaReRegReqRcvdTotal number of Re-Registration Requests received by
the home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.23 |
usrMipHaReRegReqAcceptedTotal number of Re-Registration Requests accepted by
the home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.24 |
usrMipHaReRegReqRejectedTotal number of Re-Registration Requests rejected by
the home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.25 |
usrMipHaDeRegReqRcvdTotal number of De-Registration Requests received by
the home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.26 |
usrMipHaDeRegReqAcceptedTotal number of De-Registration Requests accepted by
the home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.27 |
usrMipHaDeRegReqRejectedTotal number of De-Registration Requests rejected by
the home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.28 |
usrMipHaAdminProhibitedTotal number of Registration Requests rejected by
the home agent with error code 129ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.29 |
usrMipHaRegReqForwardedTotal number of Registration Requests forwarded by
the home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.30 |
usrMipHaForwardedRegReqTotal number of forwarded Registration Requests received by
the home agent.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.31 |
usrMipHaDuplicateIPDiscsTotal number of disconnects due to duplicate IP address.
This can happen when an MBR already exists with the
same address as as assigned to MN.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.32 |
usrMipHaDuplicateNaiDiscsTotal number of disconnects due to duplicate NAI.
This can happen when Multiple Logins is disabled and
an MBR already exists with the same NAI.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.39 |
usrMipHaClearMBRDiscsTotal number of disconnects due to Clear MBR message
received from HACN. This can happen in two scenarios,
first when HACN detects Duplicate MN IP, it sends Clear
MBR message to first HA. Second when Multiple Logins is
disabled and HACN detects Duplicate NAI. It will send
Clear MBR to first HA.ro Counter32 .1.3.6.1.4.1.77.1.1.82.2.40 |
usrMipHaCfmConfig OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.82.3 |
usrMipHaConfigFileNameThe name of the configuration file for HA MIP. If
this value is empty, then the default file name
is @file://MipHandler.cfg.rw DisplayString .1.3.6.1.4.1.77.1.1.82.3.1 |
usrMipHaCfmStatusThe Configuration File Manager Flag for
saving Home Agent MIP configurable parameters.rw UsrConfigStatus .1.3.6.1.4.1.77.1.1.82.3.2 |
usrMipHaTrapsSettings OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.82.4 |
usrMipHaUpperThresholdSpecifies the upper Water Mark for Active Session
Threshold. If the active call capacity exceeds this
limit, then a trap is sent.rw INTEGER .1.3.6.1.4.1.77.1.1.82.4.1 |
usrMipHaLowerThresholdSpecifies the lower Water Mark for Active Session
Threshold. If the active call capacity touches
this lower threshold after touching the Upper
threshold, then only a trap will be sent whenever
next time it exceeds the Upper Threshold.rw INTEGER .1.3.6.1.4.1.77.1.1.82.4.2 |
usrMipHaTrapThresholdThreshold Trap Enabled or Disabled.rw Enumeration .1.3.6.1.4.1.77.1.1.82.4.3 |
usrMipHaTrapIdleTimerIdle Timer Trap Enabled or Disabled.rw Enumeration .1.3.6.1.4.1.77.1.1.82.4.4 |
usrMipHaTraps OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.82.5 |
usrMipHaTrapsV2The Traps for MIP OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.82.5.0 |
usrMipHaActiveSessionThresholdReachedThis trap is generated when Active Session Threshold
is reached based on the calculation -
(ActiveSessions * 100) / MaxTunnels being greater
than the UpperThreshold. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.82.5.0.1 |
usrMipHaIdleTimerExpiredThis trap is generated when the Idle Timer has expired
and the tunnel has been disconnected. The trap contains
the MobileNode's home IP address. NOTIFICATION-TYPE .1.3.6.1.4.1.77.1.1.82.5.0.2 |
usrMipHaStatus OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.82.6 |
usrMipHaStatusHacnInterfaceStatusHACN Interface statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.82.6.1 |
usrMipHaStatusHaRoleHA Role. This makes sense only if HACN interface is enabled. If
HACN interface is not enabled, then HA role will be unassigned.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.82.6.2 |
usrMipHaStatus2EthPortStatusStatus of second ethernet port. If both port are in use and
second ethernet port goes down then HA stops accepting reg req.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.82.6.3 |
usrMipHaStatusHaRunIpHome Agent RUN IP Address.
DEPRECATED:
This object has been replaced by usrMipHacnSettingsHaRunIprodeprecated IpAddress .1.3.6.1.4.1.77.1.1.82.6.4 |
usrMipHaStatusHacnRespondingThis indicates whether HACN is responding to heartbeats or not.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.82.6.5 |
usrMipHaRunIPNetworkStatusHA RunIP Network added on HA Enabled or Disabled.
If the HA role is not active then no action, enabled
or disabled, is allowed; an error will be returned.
An error will also be returned if an attempt is made
to enable/disable and active calls exist.rw Enumeration .1.3.6.1.4.1.77.1.1.82.6.6 |
usrMipHaMobileInfo OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.82.7 |
usrMobileInfoTableA table containing Mobile Node Information. SEQUENCE OF UsrMobileInfoEntry .1.3.6.1.4.1.77.1.1.82.7.1 |
usrMobileInfoEntryAn entry in the Mobile Node Information list. UsrMobileInfoEntry .1.3.6.1.4.1.77.1.1.82.7.1.1 |
usrMipHaMobilePacketOutNumber of packets sent out on the tunnel.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.7.1.1.1 |
usrMipHaMobilePacketInNumber of packets received from the tunnel.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.7.1.1.2 |
usrMipHaMobileByteOutNumber of data bytes sent out on the tunnel.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.7.1.1.3 |
usrMipHaMobileByteInNumber of data bytes received from the tunnel.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.7.1.1.4 |
usrMipHaLoadInfo OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.82.8 |
usrMipHaLoadInfoSystemLoadThis specifies the average load on the system. This is calculated
by HACN and distributed to all the HAs in the heartbeat ack
message.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.8.1 |
usrMipHaLoadInfoLLHA1IP address of the least loaded HA 1 in the system. This information
is passed by HACN.ro IpAddress .1.3.6.1.4.1.77.1.1.82.8.2 |
usrMipHaLoadInfoLLHA2IP address of the least loaded HA 2 in the system. This information
is passed by HACN.ro IpAddress .1.3.6.1.4.1.77.1.1.82.8.3 |
usrMipHaLoadInfoLLHA3IP address of the least loaded HA 3 in the system. This information
is passed by HACN.ro IpAddress .1.3.6.1.4.1.77.1.1.82.8.4 |
usrMipHaLoadInfoLLHA4IP address of the least loaded HA 4 in the system. This information
is passed by HACN.ro IpAddress .1.3.6.1.4.1.77.1.1.82.8.5 |
usrMipHaLoadInfoLoadHA1Current load of least loaded HA1.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.8.6 |
usrMipHaLoadInfoLoadHA2Current load of least loaded HA2.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.8.7 |
usrMipHaLoadInfoLoadHA3Current load of least loaded HA3.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.8.8 |
usrMipHaLoadInfoLoadHA4Current load of least loaded HA4.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.8.9 |
usrMipHacnSettings OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.82.9 |
usrMipHacnSettingsHaRunIpHome Agent RUN IP Address.ro IpAddress .1.3.6.1.4.1.77.1.1.82.9.1 |
usrMipHacnSettingsHeartbeatPeriodHeartbeat period set by HACN. This value is set in HACN and is
sent to HA during Role Assignment and in each Heartbeat ACK. This
is the time period after which HA is supposed to send a heartbeat
message to HACN.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.9.2 |
usrMipHacnSettingsPacketRetryPeriodPacket Retry period set by HACN. This value is set in HACN and is
sent to HA during Role Assignment and in each Heartbeat ACK. This
is the time period after which HA is supposed to retry a message
in case HA does not gets a ack for the previous message.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.9.3 |
usrMipHacnSettingsPacketRetryCountPacket Retry count set by HACN. This value is set in HACN and is
sent to HA during Role Assignment and in each Heartbeat ACK. This
is the number of times a retry message will be sent to HACN.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.9.4 |
usrMipHacnStats OBJECT IDENTIFIER .1.3.6.1.4.1.77.1.1.82.10 |
usrMipHacnStatsHeartbeatSentTotal Number of heartbeats sent to HACN.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.10.1 |
usrMipHacnStatsHeartbeatAckRcvdTotal Number of heartbeat ack received from HACN.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.10.2 |
usrMipHacnStatsHeartbeatRetriedTotal Number of heartbeats retried.ro Unsigned32 .1.3.6.1.4.1.77.1.1.82.10.3 |
usrMipHacnStatsResetTimeReading:
Time the HACN statistics counters were last
reset. The HACN statistics are valid from
usrMipHacnStatsResetTime until present.
Resetting counters causes a discontinuity in
the monotonically increasing value of counters.
Management stations that sample these counters
need also to sample this object so that they
can know that a discontinuity occurred with
respect to the previous sample.
Its value is in NTP format.
Writing:
Writing 0 causes update of usrMipHacnStatsResetTime
and the HACN counters to be reset to 0.rw Unsigned32 .1.3.6.1.4.1.77.1.1.82.10.4 |