ULPB-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
69
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
69 total| Object Name |
|---|
usr OBJECT IDENTIFIER .1.3.6.1.4.1.429 |
RFC1213-MIB Unknown .1.3.6.1.4.1.429 |
nas OBJECT IDENTIFIER .1.3.6.1.4.1.429.1 |
ulpb OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.9 |
ulpbAdmnTableThis table defines the objects that can be changed to
manage a LAPB interface. Changing one of these parameters
may take effect in the operating LAPB immediately or may
wait until the interface is restarted depending on the
details of the implementation. SEQUENCE OF UlpbAdmnEntry .1.3.6.1.4.1.429.1.9.1 |
ulpbAdmnEntryConfigure parameter values for a specific LAPB. UlpbAdmnEntry .1.3.6.1.4.1.429.1.9.1.1 |
ulpbAdmnIndexA unique value for each X.25 subnetwork entity running LAPB
in the chassis. The value of this object matches the value
of the index of the corresponding X.25 subnetwork entity
running LAPB entry in the entity table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.9.1.1.1 |
ulpbAdmnN2ReXmitValThe maximum number of times a PDU is sent after the Ack,
P-bit or Reject timer expires. It also limits RR w/P-bit
sends with remote busy true and the Busy timer
expiring.
Default=10.rw INTEGER .1.3.6.1.4.1.429.1.9.1.1.2 |
ulpbAdmnT1AckTimeThe time interval during which the LAPB expects to receive
a response to an outstanding IPDU or unexpected response to
a sent unnumbered PDU. Value is in 0.1 second
units.
Default=10.rw INTEGER .1.3.6.1.4.1.429.1.9.1.1.3 |
ulpbAdmnTpfValThe time interval during which the LAPB expects to receive
a PDU with the F-bit set to 1 in response to a command with
the P-bit set to 1. Value is in 0.1 second
units.
Default=7.rw INTEGER .1.3.6.1.4.1.429.1.9.1.1.4 |
ulpbAdmnTrejValThe time interval during which the LAPB expects to receive
a reply to a sent REJ TPDU. Value is in 0.1 second
units.
Default=25.rw INTEGER .1.3.6.1.4.1.429.1.9.1.1.5 |
ulpbAdmnTbusyValThe time interval during which the LAPB waits for an
indication of the clearance of a busy condition at the
other LAPB. Value is in 0.1 second units.
Default=100.rw INTEGER .1.3.6.1.4.1.429.1.9.1.1.6 |
ulpbAdmnLinkIdleTimeThe time interval during which the LAPB expexts to receive
a PDU from the other LAPB. At expiration, the P/F cycle,
which may result in disconnection is initiated. Value is
in 0.1 second units. A value of 0 disables the
timer.
Default=250.rw INTEGER .1.3.6.1.4.1.429.1.9.1.1.7 |
ulpbAdmnT2AckDelayTimeThe maximum time delay before sending a delayed RR. This
must be considerably less than the Ack time value. Value
is in 0.1 second units.
Default=4.rw INTEGER .1.3.6.1.4.1.429.1.9.1.1.8 |
ulpbAdmnRecKWindowSzThe maximum number of unacknowledged IPDUs that can be
received before the acknowledgement RR must be
sent.
Default=3.rw INTEGER .1.3.6.1.4.1.429.1.9.1.1.9 |
ulpbAdmnXmitKWindowSzThe maximum number of unacknowledged PDUs that may be sent
before a response is required.
Normal Mode = 1-7.
Extended
Mode = 1-127.
Default=7.rw INTEGER .1.3.6.1.4.1.429.1.9.1.1.10 |
ulpbAdmnLocProbeThe position before the window is closed at which an I PDU
is sent with the P-bit set to solicit an acknowledgment
from the receiver.
Default=0.rw INTEGER .1.3.6.1.4.1.429.1.9.1.1.11 |
ulpbAdmnMaxRecFrmSzThe maximum allowable received I frame size. It consists
of X25 data + x25 protocol + LAPB protocol.
Default=300.rw INTEGER .1.3.6.1.4.1.429.1.9.1.1.12 |
ulpbAdmnIgnUaErrorWhen the connection is in ERROR state, this parameter
defines whether or not to ignore any UA frames
received.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.9.1.1.13 |
ulpbAdmnFrmrFrmrErrorWhen the connection is in ERROR state, this parameter
defines whether or not to re-transmit a frame reject if one
is received.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.9.1.1.14 |
ulpbAdmnFrmrInvrspErrorWhen the connection is in ERROR state, this parameter
defines whether or not to transmit a frame reject if an
invalid frame response is received.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.9.1.1.15 |
ulpbAdmnSframePbitThis parameter defines whether or not to send a frame
reject if an S-Frame is received without the P-bit
set.
Default=disable(1).rw Enumeration .1.3.6.1.4.1.429.1.9.1.1.16 |
ulpbAdmnDmOnAdmThis parameter defines whether or not to send a DM on entry
to ADM state.
Default=enable(2).rw Enumeration .1.3.6.1.4.1.429.1.9.1.1.17 |
ulpbOperTableThis table contains configuration information about
interface parameters currently set in the interface. These
objects are read-only. SEQUENCE OF UlpbOperEntry .1.3.6.1.4.1.429.1.9.2 |
ulpbOperEntryEntries of ulpbOperTable. UlpbOperEntry .1.3.6.1.4.1.429.1.9.2.1 |
ulpbOperIndexro INTEGER .1.3.6.1.4.1.429.1.9.2.1.1 |
ulpbOperN2ReXmitValro INTEGER .1.3.6.1.4.1.429.1.9.2.1.2 |
ulpbOperT1AckTimero INTEGER .1.3.6.1.4.1.429.1.9.2.1.3 |
ulpbOperTpfValro INTEGER .1.3.6.1.4.1.429.1.9.2.1.4 |
ulpbOperTrejValro INTEGER .1.3.6.1.4.1.429.1.9.2.1.5 |
ulpbOperTbusyValro INTEGER .1.3.6.1.4.1.429.1.9.2.1.6 |
ulpbOperLinkIdleTimero INTEGER .1.3.6.1.4.1.429.1.9.2.1.7 |
ulpbOperT2AckDelayTimero INTEGER .1.3.6.1.4.1.429.1.9.2.1.8 |
ulpbOperRecKWindowSzro INTEGER .1.3.6.1.4.1.429.1.9.2.1.9 |
ulpbOperXmitKWindowSzro INTEGER .1.3.6.1.4.1.429.1.9.2.1.10 |
ulpbOperLocProbero INTEGER .1.3.6.1.4.1.429.1.9.2.1.11 |
ulpbOperMaxRecFrmSzro INTEGER .1.3.6.1.4.1.429.1.9.2.1.12 |
ulpbOperIgnUaErrorro Enumeration .1.3.6.1.4.1.429.1.9.2.1.13 |
ulpbOperFrmrFrmrErrorro Enumeration .1.3.6.1.4.1.429.1.9.2.1.14 |
ulpbOperFrmrInvrspErrorro Enumeration .1.3.6.1.4.1.429.1.9.2.1.15 |
ulpbOperSframePbitro Enumeration .1.3.6.1.4.1.429.1.9.2.1.16 |
ulpbOperDmOnAdmro Enumeration .1.3.6.1.4.1.429.1.9.2.1.17 |
ulpbStatTableStatistics information about this LAPB interface. SEQUENCE OF UlpbStatEntry .1.3.6.1.4.1.429.1.9.3 |
ulpbStatEntryEntries of ulpbStatTrable. UlpbStatEntry .1.3.6.1.4.1.429.1.9.3.1 |
ulpbStatIndexA unique value for each X.25 subnetwork entity running LAPB
in the chassis. The value of this object matches the value
of the index of the corresponding X.25 subnetwork entity
running LAPB entry in the entity table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.1 |
ulpbStatRRCmdsRcvdNumber of RR commands received.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.2 |
ulpbStatRRCmdsTrnsmtNumber of RR commands transmitted.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.3 |
ulpbStatRRRspsRcvdNumber of RR response received.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.4 |
ulpbStatRRRspsTrnsmtNumber or RR response transmitted.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.5 |
ulpbStatRNRCmdsRcvdNumber of RNR commands received.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.6 |
ulpbStatRNRCmdsTrnsmtNumber of RNR commands transmitted.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.7 |
ulpbStatRNRRspsRcvdNumber of RNR response received.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.8 |
ulpbStatRNRRspsTrnsmtNumber of RNR response transmitted.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.9 |
ulpbStatREJCmdsRcvdNumber of REJ commands received.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.10 |
ulpbStatREJCmdsTrnsmtNumber of REJ commands transmitted.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.11 |
ulpbStatREJRspsRcvdNumber of REJ responses received.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.12 |
ulpbStatREJRspsTrnsmtNumber of REJ responses transmitted.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.13 |
ulpbStatSABMCmdsRcvdNumber of SABM commands received.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.14 |
ulpbStatSABMCmdsTrnsmtNumber of SABM commands transmitted.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.15 |
ulpbStatDISCCmdsRcvdNumber of DISC commands received.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.16 |
ulpbStatDISCCmdsTrnsmtNumber of DISC commands transmitted.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.17 |
ulpbStatDMRspsRcvdNumber of DM response received.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.18 |
ulpbStatDMRspsTrnsmtNumber of DM response transmitted.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.19 |
ulpbStatUARspsRcvdNumber of UA response received.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.20 |
ulpbStatUARspsTrnsmtNumber of UA response transmitted.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.21 |
ulpbStatFRMRRspsRcvdNumber of FRMR response received.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.22 |
ulpbStatFRMRRspsTrnsmtNumber of FRMR response transmitted.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.23 |
ulpbStatIFrameCmdsRcvdNumber of I-frame command received.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.24 |
ulpbStatIFrameCmdsTrnsmtNumber of I-frame commands transmitted.ro INTEGER .1.3.6.1.4.1.429.1.9.3.1.25 |