TN-ZERO-TOUCH-PROVISION-MIB
The TN-ZERO-TOUCH-PROVISION-MIB defines the management interface for automating the initial configuration and deployment of network devices via Zero-Touch Provisioning (ZTP) protocols, specifically tracking provisioning state transitions, bootstrap server connectivity, and image installation status.
Imported Objects
Objects
5 total| Object Name |
|---|
tnZeroTouchProvisionMIBThe mib for device zero touch device provisioning. MODULE-IDENTITY .1.3.6.1.4.1.7483.6.12 |
tnZeroTouchProvisionNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.12.0 |
tnZTPAutoDiscoveryNotificationA tnAutoProvDiscoveryNotification trap is sent when the device receives a provisioning server (EMS)
address from DHCP server. The objects in the notification correspond to the values in scalar
instance in SNMPv2-MIB and row instances in the ifTable, entPhysicalTable, tnIpMgmtTable and
tnIpextMgmtTable. At most one of the tnIpAddr or tnIpv6Addr could be zero length, which means
the IPv4 or IPv6 address, correspondingly, is not supported at the time this notification is sent. NOTIFICATION-TYPE .1.3.6.1.4.1.7483.6.12.0.1 |
tnZeroTouchProvisionMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.12.1 |
tnZTPAutoDiscoveryModeTo mode of the Zero Touch Provision. The none(0) disable the
ZTP auto discovery. The dhcp(1) enable the ZTP auto discovery
through dhcp.rw Enumeration .1.3.6.1.4.1.7483.6.12.1.1 |
More MIBs from Vitesse Semiconductor
Browse all Vitesse SemiconductorMIBs →The TROPIC-OPTICALPORT-MIB defines the managed object classes for monitoring and configuring optical transceiver parameters, including signal power levels, laser bias currents, and temperature, on Tropic Networks optical transport equipment. This module enables granular fault detection and performance analysis of physical layer optical interfaces by exposing standardized counters and gauges for link health validation.
The TROPIC-STATISTICS-MIB module monitors network traffic performance and anomaly detection thresholds on Tropic Networks devices by exposing raw packet counters, binned traffic distributions, and Traffic Condition Alarm (TCA) configuration parameters.
The TROPIC-SYSTEM-MIB provides standard SNMP access to Nokia network element system-level attributes, including device identity, uptime, contact information, and operational status. It enables centralized monitoring of core system health metrics such as CPU utilization, memory usage, and interface state transitions across TROPIC-based Nokia infrastructure.
The TROPIC-GENERIC-NOTIFICATION-MIB defines standard SNMP trap and inform PDU structures for Tropic Networks devices, enabling the transmission of critical operational events such as link state transitions, authentication failures, and hardware fault conditions to a management station. This module facilitates real-time alerting for network availability and security incidents by mapping vendor-specific events to generic notification objects within the Tropic ecosystem.
The TROPIC-GLOBAL-REG MIB module facilitates the monitoring and management of registration states, session counts, and subscriber lifecycle events on Nokia TROPIC (T1/T2) access gateways and aggregation platforms. It provides critical visibility into the operational status of user registration processes and associated resource utilization within the Nokia IP/MPLS and mobile backhaul infrastructure.
The TROPIC-PSD-MIB facilitates the monitoring and management of photonic service demarcation points on Tropic Networks optical transport equipment, specifically tracking service status, signal integrity, and interface performance metrics at the network edge.